kenworth t359 defining tomorrow hallamtruck brochure
TRANSCRIPT
With its tight turning circle, short bumper to back of cab measurement, carrying capacity and range of axle configurations, Kenworth’s T359 defines the perfect solution for many applications.
For metropolitan applications, including Agitators, the availability of Electronic Stability Program (ESP) in the full suite of Kenworth’s optional Electronic Brake Safety Systems (EBSS) is of particular relevance in minimising the possibility of a roll over in adverse conditions.
Available in 4x2, 6X4, 8x4, and 10x4 configurations the T359 delivers Kenworth’s renowned reliability, durability and productivity.
T359 — just another way Kenworth is defining tomorrow for Australian transport operators.
PURPOSE BUILT TO INDUSTRY SPECIFICATIONS
DEFINING APPLICATION AND PRODUCTIVITY
A level of manoeuvrability and visibility rare in a bonneted truck.
DEFINING SUPERIOR LEVELS OF DRIVER COMFORT AND SAFETY
Designed to deliver maximum driver confidence in congested driving conditions.
DEFINING CONTROL WITH STYLE
Vital functions fall readily to hand without the need for excessive movement or distraction.
Interior trim mounted over acoustic insulation minimises noise and heat, adding to driver comfort.
The curved one-piece windscreen coupled with the steeply sloped hood provides excellent forward vision.
Classic styling has been teamed with the highest standards of driver comfort and safety in the T359 cab design.
Daylite doors, standard on the T359, provide excellent sideways vision, which is of particular importance in tight manoeuvring situations.
Large heated mirrors and spotter mirrors assist the driver to clearly see what is happening behind the truck.
All these factors combine to make it easier to get the job done, particularly in heavy city traffic, built up areas, and tight construction sites.
DRIVER COMFORT AND SAFETY
DEFINING AGITATOR APPLICATIONS
The agitator platform engineered to redefine industry expectations
APPLICATION AND PRODUCTIVITY
The Kenworth T359 features a wide range of important driver environment and safety features. Doors have electric windows as standard and wide comfortable arm rests.
The Heater, Ventilation and Air Conditioner Units keep you warmer in winter and cooler in summer. The bulkhead electrical connections reduce dust, heat and noise in the cab to improve the driving environment.
The T359 is available with a Front Underrun Protection System (FUPS) bumper including provision for optional driving lights.
The T359 is purpose built to take on specific metro and intrastate applications with the productivity and attention to detail that you expect from Kenworth.
The T359 model is versatile enough to accomodate a prime mover, rigid truck, agitator, and car carrier specifications, each one a perfect solution for the task at hand.
For example the concrete distribution industry demands a unique breed of vehicle. One that’s able to handle maximum payloads in tough conditions, while working in heavy traffic, built up areas and on congested construction sites.
The T359A is purpose built to these industry specifications
and is available in 6x4, 8x4 and 10x4 for bowl sizes up to 9m3.
With its short BBC, walk through cab design, manoeuvrability, low tare weight, visibility and minimal overall length, it is perfect for high volume urban concrete applications where it can deliver maximum loads and maximum productivity.
AGITATOR CONFIGURATION
WHEELBASE OPT. WHEELBASE OPT.
CUT OFF OPT.
CUT OFF OPT.
9701884
2695
2695 415
970
1725
1725
415
WHEELBASE OPT.
CUT OFF OPT.
1884 1321 1321
2695 415
970
1725
T359A DAY CAB 6X4 T359A DAY CAB 10X4
T359A DAY CAB 8X4
WHEELBASE OPT. WHEELBASE OPT.
CUT OFF OPT.
CUT OFF OPT.
9701884
2695
2695 415
970
1725
1725
415
WHEELBASE OPT.
CUT OFF OPT.
1884 1321 1321
2695 415
970
1725
T359A DAY CAB 6X4 T359A DAY CAB 10X4
T359A DAY CAB 8X4
WHEELBASE OPT. WHEELBASE OPT.
CUT OFF OPT.
CUT OFF OPT.
9701884
2695
2695 415
970
1725
1725
415
WHEELBASE OPT.
CUT OFF OPT.
1884 1321 1321
2695 415
970
1725
T359A DAY CAB 6X4 T359A DAY CAB 10X4
T359A DAY CAB 8X4
T359A DAY CAB 6x4 T359A DAY CAB 8x4 T359A DAY CAB 10x4
CONFIGURATION
• 6X4 standard
• 8X4 optional
• 10X4 optional
ENGINE
• ISLe5 280HP @ 778LBFT TORQUE
- SCR standard
• ISLe5 320HP @ 996LBFT TORQUE
- SCR optional
• ISLe5 340HP @ 1106LBFT TORQUE
- SCR optional
• ISLe5 360HP @ 1180LBFT TORQUE
- SCR optional
• ISLe5 380HP @ 1254LBFT TORQUE
- SCR optional
EXHAUST
• EGP POST MOUNTED LEFT HAND SIDE
BEHIND CAB standard
AIR CLEANER
• DONALDSON PLASTIC AIR CLEANER
MOUNTED UNDER HOOD standard
TRANSMISSION
• ALLISON MD3500P standard
• EATON RTO11909A-ALL optional
• ALLISON MD3200P optional
• FO–14318B–MXP optional
• FO–14E309ALL–VMS-optional
FRONT AXLE
• DANA E-1462I standard
• DANA E-1332I TWIN STEER
(8X4 & 10X4 ONLY) optional
• MERITOR FG941 optional
REAR AXLE
• DANA DSH40P standard
• DANA TANDEM W/LAZY AXLE optional
REAR SUSPENSION
• KENWORTH AIRGLIDE 400 standard
• KENWORTH AIRGLIDE 600
(10X4 ONLY) optional
• HENDRICKSEN HN402 optional
BRAKES
• DRUM standard
WHEELS
• ALCOA 10 STUD standard
• STEEL optional
FUEL TANKS
• 150L 625mm DIA RIGHT HAND FORWARD
standard
• 260L 625mm DIA RIGHT HAND FORWARD
optional
• 70L ADBLUE UREA TANK LEFT HAND REAR
standard
• 70L ADBLUE UREA TANK RIGHT HAND REAR
optional
• 180L 625mm DIA RIGHT HAND REAR
(TWIN STEER) optional
• 260L 625mm DIA RIGHT HAND REAR
(TWIN STEER) optional
• 180L 625mm DIA LEFT HAND REAR
(TWIN STEER) optional
• 260L 625mm DIA LEFT HAND REAR
(TWIN STEER) optional
PAINT
• SINGLE COLOUR TO CAB standard
GCM
• 23.5 TONNE LIMIT-6X4
• 28.5 TONNE LIMIT-8X4
• 33 TONNE LIMIT-10X4
MAIN SPECIFICATIONS AND OPTIONS
STANDARD CONFIGURATION
MAIN SPECIFICATIONS AND OPTIONS
CONFIGURATION• 6X4 standard• 4X2 optional• 8X4 optional
KITS • FUEL HAUL & GAS HAUL optional
ENGINE ISLe5 • ISLe5 280HP @ 778LBFT TORQUE - SCR standard• ISLe5 320HP @ 996LBFT TORQUE - SCR optional• ISLe5 340HP @ 1106LBFT TORQUE - SCR optional• ISLe5 360HP @ 1180LBFT TORQUE - SCR optional• ISLe5 380HP @ 1254LBFT TORQUE - SCR optionalISMe5• ISMe5 434HP @ 1534LBFT TORQUE - SCR optional
EXHAUST• EGP MOUNTED UNDER CHASSIS standard• EGP POST MOUNTED LEFT HAND SIDE
BEHIND CAB optional• EGP MOUNTED RIGHT HAND SIDE OUTSIDE
OF CHASSIS for ISMe5 optional
AIR CLEANER• DONALDSON PLASTIC AIR CLEANER
MOUNTED UNDER HOOD standard• DONALDSON 2504 AIR CLEANER ENGINE
MOUNTED (FOR ISME5) optional
TRANSMISSION • EATON FR9210B standardISLe5• EATON RTO1919A-ALL optional• EATON FRO12210C optional• EATON RTLO12913A optional• EATON RTLO14918B optional• EATON FO–14E318B–MXP optional• LLISON AUTOMATIC
MD3500PR/MD3200P optionalISMe5• FO-16E310C-LAS ULTRASHIFT PLUS optional• RTLO16913A optional
FRONT AXLE• DANA E-1462I standard • DANA TWIN STEER/DUAL E-1322I optional• MERITOR FG941 optional• MERITOR TWIN STEER/DUAL FG941 optional
REAR AXLE• DANA DSH40P standard • DANA S23-170 single optional• DANA D46-170 optional• MERITOR RT40-145 optional• MERITOR RT46-160 optional
REAR SUSPENSION• KENWORTH AIRGLIDE 400 standard• KENWORTH AIRGLIDE 460 optional• HENDRICKSON HN402 optional
BRAKES• DRUM standard• DISC optional
WHEELS• ALCOA 10 STUD standard• STEEL optional
SLEEPER• 28” IT optional• 36” RECESSED BACK FLAT TOP optional
FUEL TANKS• 260L 625mm DIA RIGHT HAND FORWARD
standard• 70L ADBLUE UREA TANK RIGHT HAND
REAR standard• RANGE OF ISLe5 TANK PACKAGES TO SUIT
optional• RANGE OF ISMe5 TANK PACKAGES TO SUIT
optional
PAINT• SINGLE COLOUR TO CAB standard
GCM ISLe5• 40 TONNE LIMIT* ISMe5• 50 TONNE LIMIT*
* higher rating subject to application approval
T359 28” SLEEPER
WHEELBASE OPT.
970
CUT OFF OPT.
2314
3284
T359 DAY CAB 8X4
WHEELBASE OPT. CUT OFF OPT.
9701884
2695
T359 DAY CAB
WHEELBASE OPT. CUT OFF OPT.
970 1725
2695 415 OPT.
1725
415 OPT.
T359 28” SLEEPER
WHEELBASE OPT.
970
CUT OFF OPT.
2314
3284
T359 DAY CAB 8X4
WHEELBASE OPT. CUT OFF OPT.
9701884
2695
T359 DAY CAB
WHEELBASE OPT. CUT OFF OPT.
970 1725
2695
T359 DAY CAB T359 DAY CAB 8x4 T359 28” SLEEPER
T359 28” SLEEPER
WHEELBASE OPT.
970
CUT OFF OPT.
2314
3284
T359 DAY CAB 8X4
WHEELBASE OPT. CUT OFF OPT.
9701884
2695
T359 DAY CAB
WHEELBASE OPT. CUT OFF OPT.
970 1725
2695 415 OPT.
1725
415 OPT.
DEFINING SAFETYIt’s all about looking after the most important payload of all
ABS ANTILOCK BRAKING SYSTEMPrevents wheel lock-up when the vehicle is over braked, often reducing stopping distances. Vehicles can retain directional stability
and steerability, even under emergency braking on slippery road surfaces. ABS also reduces the danger of jackknifing in the case
of vehicle combinations.
DTC DRAG TORQUE CONTROLPrevents the driven wheels from compression locking on a slippery surface by raising engine revs to assist with vehicle stability.
ATC AUTOMATIC TRACTION CONTROLPrevents wheel spin under acceleration as the drive torque exceeds the drive tyres to road surface adhesion. The ATC system
communicates with the engine ECU to reduce engine power or will apply the brakes to the drive wheels depending on the low
traction event.
ESP ELECTRONIC STABILITY PROGRAMHelps to restore vehicle stability through the use of ABS, ATC, steering direction and vehicle directional stability information. Steering
angle, yaw, suspension pressure and brake application pressure sensors monitor the intended vehicle directional control versus actual
vehicle movement. ESP intervenes by applying individual wheel brakes, or reduced engine torque when required to enhance vehicle
stability. The system is compatible with multi trailer combinations.
TRM TRAILER RESPONSE MANAGEMENTElectronic trailer brake actuation (for EBS compatible trailers only) for improved trailer braking response to assist with
reduced stopping distances.
ACB ACTIVE CRUISE WITH BRAKESHelps assist with accident avoidance, by using on board computers and radar to engage the engine and wheel braking
systems if other vehicles on the road enter unsafe distances from the truck.
At Kenworth, protecting the driver, vehicle, payload, and other road users against unexpected hazards has always been a paramount consideration.
Safety is built into every T359 through Application Engineering, a design approach that also delivers optimal payloads, reliability and productivity.
With the addition of Kenworth Electronic Brake Safety Systems (EBSS) the result is not only safety and proven productivity gains through being engineered to application, but enhanced accident avoidance from the comprehensive list of EBSS options available.
AUSTRALIAN MADE. WORLD’S BEST.
AN ENVIABLE RECORD
Kenworth trucks are designed and manufactured in Australia to perform in some of the toughest and most demanding applications found anywhere in the world. They are application-engineered to exacting standards, using the best technology and componentry.
On a whole-of-life cost basis, there are few trucks that can approach Kenworth in helping to produce a better bottom line for your business. From its beginning in Bayswater, Victoria in 1971, Kenworth’s Australian operations have developed into a world class design,development, manufacturing and testing facility incorporating advanced training
services and its sophisticated PACCAR Parts warehouse and distribution centre.
With over 45,000 Australian made trucks delivered, Kenworth Australia provides products and services to the transport sector that are the envy of the industry worldwide.
DEFINING THE BEST DEALER NETWORK
Kenworth has built an extensive truck dealer network across Australia, New Zealand and Papua New Guinea that is renowned for its professionalism and excellence in the heavy duty truck industry.
Our dedicated 1800 Roadside Assistance Service covers Australia 24-7. Simply call 1800 4 PACCAR (1800 472 222) to be connected to your nearest PACCAR Dealer.
For more information contact your local Kenworth Dealer or go to www.kenworth.com.au
IMPORTANT: The vehicles shown in this brochure are for illustrative purposes only and may include
some non-standard optional equipment. All weights and measurements should be regarded
as approximate only. For full details contact your Kenworth Dealer. In the interests of product
improvement, Kenworth reserves the right to change these specifications without prior notice.
PACCAR Australia Pty Ltd, 64 Canterbury Road, Bayswater, Victoria 3153
Telephone (03) 9721 1500 Facsimile (03) 9720 4144