kettmaps user guide android (english)
TRANSCRIPT
2
With KETTMaps / S-FIT app, you can run, ride or rowing over more than 100,000km of motion videos all over the world and daily updated by the users themselves. Try to follow their rhythm under the same conditions at the pace they were recorded. Use the KINOMAP portal and choose you own real life video. Increase your fitness by using your own interval or heart rate training (*).
Connect directly your compatible KETTLER equipment. Alternatively, use the front facing camera giving you an optical cadence, stride or stroke sensor.
(*) appears with the next update
4
If you want to use KETTMaps, you have first to connect using your Kinomap account. Once your login is successful, you can start your training session. If you do not log-off, you will remain logged next time you launch the App.
If you do not have a KETTMaps / Kinomap account, please Sign In to get a free account.
Sign In
5
The standard version is for free and you will have access to a selected videos and special interval workouts.
A subcription is required to get access to all eligible content, like all kinds of videos, multiplayer modes, heart rate control workout and many more.
On the first login, the app can prompt you for an activiation code. If you have one, enter it in the appropriate field to activate your subcription for the app.
You can call the option >>Redeem code<< whenever you need later on.
Activation code
6
The standard version is for free and you will have access to a selected videos and special interval workouts.You can also subscribe for the service, based on a monthly or yearly subscription, giving you access to enhanced features. Using subscribe to KETTMAPS.
Subcription
8
3. Smartphone / Tablet connection
During two minutes, you can connect S- Line device with your
smartphone. Ensure Bluetooth is ON.
Preparation of BluetoothKETTLER S-Line Device
1. Make the fitness computer visible:
2. Press the OK Button for more than 5 seconds
When the Bluetooth name is displayed and the outer ring changes the color, the device is ready for Bluetooth connection to a smartphone /tablet for 2 minutes.
Figure similarExample: Racer S A73F69
9
Equipment connectionKETTLER S-Line Device
At first launch, the app reports no training profile has been defined.
1. Click on the icon to create a profile as shown2. Then clip on the top right hand side on the „+“ sign.3. Start a search to detect your equipment using the correct
technology. Press „bluetooth discovery“ 4. Confirm KETTLER BT Device - Please wait
After accepting pairing request, KETTLER display will change
5. Confirm the correct type of equipment and rename if you want
Outer Ring will light up constantly blue
10
Preparation of bluetoothKETTLER E-Premium Display
1. Premium display visibleTurn on Bluetooth at the display of the device. device settings > Bluetooth ON
2. Change the mode to APP/PCdevice name and device number available below. Go back to the main menu.
Figure similiarexample: ERGO C12 Display
3. smartphone / tabletconnectionIt is possible, to find your device on smartphone / tablet which support BLE 4.0.
You can pair the display and the app directly from inside the app.
11
Equiment connectionKETTLER E-Premium Display
At first launch, the app reports no training profile has been defined.
1. Click on the icon to create a profile as shown2. Then clip on the top right hand side on the „+“ sign.3. Start a search to detect your equipment using the correct
technology. Press „kettler smart discovery“ 4. Confirm KETTLER BT Device - Please wait
After accepting pairing request, KETTLER display will change 5. Confirm the correct type of equipment and rename if you
want
12
Equipment connectionUsing fitness device with external sensor
You can also use an external sensor like cadence sensor. or bluetooth heart rate sensor. There are two possibilities:
1a. Connect as primary sensor Search for BLE sensors and confirm
1b. Connect as addtional sensor in combination with a fitness devicePress on your connected device to add an additional sensor.
2. Search for BLE sensors and confirm.
Example: BLE RPM Sensor as an additional sensor to
a training device
13
Equipment connectionUsing fitness device with optical sensor
If there is no bluetooth connection with a fitness device, you can
use an optical sensor (front camera) for simulate the speed.
Press internal devices and choose the right type of movement for the front camera.
Use the profile details for setting the right resistance levels
Example optical sensor for cycling movement
Selected equipment
14
Equipment connection
A sensor is not connected, if the icon is translucentIf a sensor is connected once correctly you see the icon fully lighted.
Observe the marked device for your training. Same on your kettler fitness device (S-Line)The app is connected with the fitnes computer, if the outer ring light up constantly blue.
You can start with your training.
For a 2nd use, you do not need a new manually connection .
15
Equipment connectedKettler E-Premium Display
Ensure that you have saved your training equipment after selection.
When the App is connected with the fitness computer, the display is showing the
following message: „device connected to Kettler supported Software“
On your training screen, you can see your exercise detection device. Once confirmed, you can start training.
For a 2nd use , you do not need to confirm the Bluetooth connection of the device
again. You can start your training session directly.
Premium Display is not connected
Premium Display connected with the app and ready to start
17
There are several lists of videos made available, on which you can choose the video you want to train on it during your workout session. There is a filter function to ensure you get access to the videos you are looking for (Featured, popular, most viewed, most recent, duration, distance, incline…)
Videos selection
For each video, you can see relevant information: its name, the
contributor (who published the video), country, duration, distance,
average of positive slope, average speed.
18
At the top of the screen are displayed the video data and other relevant information.At the bottom, you can switch between 3 tabs showing alternatively maps, elevation profile or dashboard.
Workout display
To initiate video playback (if connected with a fitness device)
On tablets, you can turn the display to get another view.
19
On the screen you get instructions when having to adjust the resistance according to the elevation profile (altitude) when using a cadence or an optical sensor.
When being connected to the KETTLER device wireless, you can still
change the resistance with „+“ and „-“
Set resistance / gears
20
When you want to pause or stop the workout, just stop pedaling and use the back button or „<“ beside the icon of your tablet/ smartphone.Click on „resume“ text to resume a workout which has not been completed.
Stop workout
21
Join the profile training for your individual workout plan and use appropriate profiles. If the interactive device is connected with the app, you only have to choose the time for count down and start training. With the Button + and - you can change the selected parameter.
Profile training
Easy and clearly presented profile training with your Kettler device. Change the difficulty in %.
23
First, open the left menu and click on “Activity history” .You can see the history of your past workouts including name of the video you trained, date of that workout, performed duration and distance.
Click on any specific workout to get all information
Activity history
24
Your activity log is visible with a map, summary data and detailled charts on speed, power, cadence, heart rate.Workout data can be automatically exported as TCX or GPX using export feature from android system.
Activity details
resume saved training
26
There are several ways to find the appropriate video .You can search a video by clicking on the search bar. Once you typed at least 3 characters, an auto completion search is made.You can also have a geographical search. Open the left menu and click on “Map” in the menu
Search
27
Playlists
Search for more public playlists within the app.
Create and use your individual playlists of your favorite videos directly from your account. You can share it for everybody (public) or only for your own.
29
Open the top corner, push the icon. On this screen, you can set your user details (units, height, weight, birthday, gender, frontal area)
Other options can be set:
- Default video quality (SD/HD)- Training mode- Audio message for resistance adjustment- Hardware acceleration toggle.
User Settings
31
The App is optimized for an external display: Chromecast or HDMI, taking benefit on the dual screen ( device and TV screen)
External display