khóa học phân tích động học solidworks simulation
TRANSCRIPT
1 Hotline: 0981.098.443
Chương trình học:
Có 14 lession: Với mục đích sau khi học có thể tối ưu hóa thiết kế. Dựa vào kết
quả phân tích ta biết được vị tri nào cần thêm vật liệu hay tôi cứng, vị trí nào
cần bớt vật liệu.
Ví dụ:
Những vị trí góc của bậc trục, của góc vách tập trung ứng suất lớn. Theo
tiêu chuẩn phá hủy kết cấu ta fillet cung R, hay tạo gân với kích thước thay đổi
được trên phần mềm, ta có thể gán các giá trị khác nhau để đạt kết quả theo yêu
cầu.
Những vị trí trên kết cấu có hệ số an toàn K quá cao, t có thể tối ưu bằng
cách giảm đi vật liệu phần cho và kiểm nghiệm lại theo hệ số K của kết cấu
(máy thông thường k=1.5, hay máy thang máy k=9-15 v.vv..)
Ví dụ kết cấu chịu run động, thì ta xem kết quả của chuyển vị để biết nó
dao động bao nhiêu mà thay đổi kết cấu hay gia cố thêm vật liệu cho vị trí đó.
Suất báo cáo file word, có file ví dụ (trục dẫn động phụ).
Một số lession không có hình ảnh, chỉ có dữ liệu để thực hiện.
15 Hotline: 0981.098.443
Ví dụ về kết quả sau khi phân tích của trục dẫn động. ( Giảng viên sẽ hướng dẫn bạn
cách đọc kết quả sau mỗi bài phân tích)
Simulation of Truc dan dong phu Date: Saturday, October 03, 2015 Designer: Solidworks
Study name: Trục dẫn động 2 Analysis type: Static
Table of Contents Description .................................................... 15
Assumptions .................................................. 16
Model Information .......................................... 16
Study Properties ............................................ 17
Units .............................................................. 17
Material Properties......................................... 18
Loads and Fixtures ........................................ 19
Connector Definitions..................................... 20
Contact Information ....................................... 20
Mesh Information ........................................... 21
Sensor Details ............................................... 22
Resultant Forces ........................................... 22
Beams ........................................................... 22
Study Results ................................................ 23
Conclusion..................................................... 26
Description No Data
16 Hotline: 0981.098.443
Assumptions
Model Information
Model name: Truc dan dong phu
Current Configuration: Default
Solid Bodies
Document Name and
Reference Treated As Volumetric Properties
Document Path/Date
Modified
Split Line6
Solid Body
Mass:4.88483 kg
Volume:0.00062626 m^3
Density:7800 kg/m^3
Weight:47.8713 N
D:\Do an tot
nghiep\Update\Xuat ban ve\2
Truc dan dong chinh\Truc dan dong phu.SLDPRT
Oct 03 21:46:07 2015
TRUNG TÂM
ADVANCE C
AD
17 Hotline: 0981.098.443
Study Properties Study name Trục dẫn động 2
Analysis type Static
Mesh type Solid Mesh
Thermal Effect: On
Thermal option Include temperature loads
Zero strain temperature 298 Kelvin
Include fluid pressure effects from SolidWorks Flow Simulation
Off
Solver type FFEPlus
Inplane Effect: Off
Soft Spring: Off
Inertial Relief: Off
Incompatible bonding options Automatic
Large displacement Off
Compute free body forces On
Friction Off
Use Adaptive Method: Off
Result folder SolidWorks document (D:\Do an tot nghiep\Update\Xuat ban ve\2 Truc dan dong chinh)
Units Unit system: SI (MKS)
Length/Displacement mm
Temperature Kelvin
Angular velocity Rad/sec
Pressure/Stress N/m^2
18 Hotline: 0981.098.443
Material Properties
Model Reference Properties Components
Name: Plain Carbon Steel Model type: Linear Elastic
Isotropic Default failure
criterion: Unknown
Yield strength: 2.20594e+008 N/m^2 Tensile strength: 3.99826e+008 N/m^2 Elastic modulus: 2.1e+011 N/m^2 Poisson's ratio: 0.28
Mass density: 7800 kg/m^3 Shear modulus: 7.9e+010 N/m^2
Thermal expansion coefficient:
1.3e-005 /Kelvin
SolidBody 1(Split Line6)(Truc dan dong phu)
Curve Data:N/A
TRUNG TÂM
ADVANCE C
AD
19 Hotline: 0981.098.443
Loads and Fixtures
Fixture name Fixture Image Fixture Details
Fixed-1
Entities: 2 face(s) Type: Fixed Geometry
Resultant Forces Components X Y Z Resultant
Reaction force(N) 0.0106549 304.139 -0.00774017 304.139
Reaction Moment(N.m) 0 0 0 0
Load name Load Image Load Details
Force-1
Entities: 1 face(s) Type: Apply normal force
Value: 120 N Phase Angle: 0
Units: deg
Force-2
Entities: 1 face(s) Type: Apply normal force
Value: 103 N Phase Angle: 0
Units: deg
Force-3
Entities: 1 face(s) Type: Apply normal force
Value: 105 N Phase Angle: 0
Units: deg
Force-4
Entities: 1 face(s) Type: Apply normal force
Value: 136 N Phase Angle: 0
Units: deg
20 Hotline: 0981.098.443
Force-5
Entities: 1 face(s) Type: Apply normal force
Value: 110 N Phase Angle: 0
Units: deg
Connector Definitions No Data
Contact Information No Data
TRUNG TÂM
ADVANCE C
AD
21 Hotline: 0981.098.443
Mesh Information Mesh type Solid Mesh
Mesher Used: Standard mesh
Automatic Transition: Off
Include Mesh Auto Loops: Off
Jacobian points 4 Points
Element Size 4.81372 mm
Tolerance 0.240686 mm
Mesh Quality High
Mesh Information - Details
Total Nodes 62552
Total Elements 41031
Maximum Aspect Ratio 13.685
% of elements with Aspect Ratio < 3 97.8
% of elements with Aspect Ratio > 10 0.0366
% of distorted elements(Jacobian) 0
Time to complete mesh(hh;mm;ss): 00:00:08
Computer name: KHANH-PC
22 Hotline: 0981.098.443
Sensor Details No Data
Resultant Forces
Reaction Forces
Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N 0.0106549 304.139 -0.00774017 304.139
Reaction Moments
Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N.m 0 0 0 0
Beams No Data
TRUNG TÂM
ADVANCE C
AD
23 Hotline: 0981.098.443
Study Results
Name Type Min Max
Stress1 VON: von Mises Stress 0.000382879 N/mm^2 (MPa) Node: 41948
3.35257 N/mm^2 (MPa) Node: 62523
Truc dan dong phu-Trục dẫn động 2-Stress-Stress1
Name Type Min Max
Displacement1 URES: Resultant Displacement
0 mm Node: 65
0.00244981 mm Node: 54096
24 Hotline: 0981.098.443
Truc dan dong phu-Trục dẫn động 2-Displacement-Displacement1
Name Type Min Max
Strain1 ESTRN: Equivalent Strain 1.10185e-008 Element: 28507
1.07722e-005 Element: 36079
TRUNG TÂM
ADVANCE C
AD
25 Hotline: 0981.098.443
Truc dan dong phu-Trục dẫn động 2-Strain-Strain1
Name Type Min Max
Factor of Safety1 Max von Mises Stress 65.7985 Node: 62523
576146 Node: 41948
Truc dan dong phu-Trục dẫn động 2-Factor of Safety-Factor of Safety1
Name Type
Displacement1{1} Deformed Shape
26 Hotline: 0981.098.443
Truc dan dong phu-Trục dẫn động 2-Displacement-Displacement1{1}
Conclusion
TRUNG TÂM
ADVANCE C
AD