ki-102 c t 8 t s
TRANSCRIPT
Horizontal 1/3 Octave PolarsK I - 1 0 2 Vertical 1/3 Octave PolarsFrequency Response
Horizontal Off-Axis Transfer Function Directivity Index
Horizontal Coverage (-6dB) Vertical Coverage (-6dB)
Vertical Off-Axis Transfer Function UP Vertical Off-Axis Function DOWN
Impedance
COMPACT TRAPEZOIDAL 8"TWO-WAY SPEAKER SYSTEM
50
45
40
35
30
25
20
15
10
5
0
10 15 23 34 51 77 114
173
258
390
581
876
1309
1979
2991
4459
6739
1004
7
1518
5
Ohm
s
Frequency
115
105
95
85
75
20 29 42 61 88 127
183
267
383
558
802
1168
1679
2443
3557
5113
7442
1069
8
1557
2
dB
Frequency
12
6
0
-6
-12
-18
-24
-30
010203040
20 32 50 80 127
202
320
508
806
1280
2032
3225
5120
8127
1290
2
2048
0
dB
Frequency
12
6
0
-6
-12
-18
-24
-30
010203040
20 32 50 80 127
202
320
508
806
1280
2032
3225
5120
8127
1290
2
2048
0
dB
Frequency
12
6
0
-6
-12
-18
-24
-30
010203040
20 32 50 80 127
202
320
508
806
1280
2032
3225
5120
8127
1290
2
2048
0
dB
Frequency
360
315
270
225
180
135
90
45
0
20 32 50 80 127
202
320
508
806
1280
2032
3225
5120
8127
1290
2
2048
0
Cove
rage
ang
le
Frequency
360
315
270
225
180
135
90
45
0
20 32 50 80 127
202
320
508
806
1280
2032
3225
5120
8127
1290
2
2048
0
Cove
rage
ang
le
Frequency
20
18
16
14
12
10
8
6
4
2
0
20 32 50 80 127
202
320
508
806
1280
2032
3225
5120
8127
1290
2
2048
0
dB
Frequency
COMPACTTRAPEZOIDAL
8" TWO-WAYSPEAKER SYSTEM
Need the performance but don’t havethe space? The KI-102 is a compact
trapezoidal two-way speaker systemcapable of superb voice and music
performance in permanent installations. It is recommended for
use in restaurants, clubs, schools,churches, health clubs and corporate
A/V production environments where fidelity requirements are high,
but real estate is limited. The KI-102 couples a high power,
long excursion 8" woofer with a 1" titanium diaphragm compression
driver on a 90˚ X 90˚ hybrid Tractrix® Horn.
Proprietary CNC fabrication techniques are used to ensure maxi-
mum precision and uniform tolerancesfor the tuned port, 3/4" MDF enclo-
sure. Dado“lock-tab” and rabbet jointconstruction contribute to industryleading reliability and ruggedness
and a cabinet remarkably free from resonance and cabinet-induced
coloration.The radiused enclosure and
perforated metal grille add structuralintegrity and are texture-coated for
weather and corrosion resistance.Available in black, white or paintable
raw MDF, the KI-102 is covered by theKlipsch limited five-year warranty.
Mounting capabilities include top andbottom attachments for the SB-102
“U”-shaped bracket. The KI-102 is compatible with the Klipsch KI-115 subwoofer
for extended low-frequency, highpower reproduction, using an external
active two-way crossover.
K I - 1 0 2● Compact 22.5˚ symmetrical trapezoidal design● High power 8" woofer and 1" titanium diaphragm
HF compression driver● 90˚ X 90˚ hybrid Tractrix Horn● Flexible mounting options ● KLIP-circuit HF driver protection device● Smooth polar response, extended 100-watt
power handling● 96dB half-space sensitivity, 113dB maximum output● Only 19" X 11.5" X 10" and 19 lbs.
FREQUENCY RESPONSE1
POWER HANDLING2
MAXIMUM CONTINUOUS OUTPUT3
DISPERSION ANGLEDIRECTIVITYSENSITIVITY4
NOMINAL IMPEDANCECROSSOVER FREQUENCY
OVERLOAD PROTECTIONCOMPONENTS
ENCLOSURE MATERIALINPUT CONNECTIONS
DEPTHHEIGHT
WIDTH FRONTWIDTH BACKNET WEIGHT
SHIPPING WEIGHTFINISHES
ACCESSORIES
75Hz-17kHz±4dB, -10dB 62Hz (see graph)100 Watts (21.2V)113dB90˚ Horizontal X 90˚ Vertical (see graph)7dB (see graph)96dB8 Ohms, 4.5 Ohms Minimum at 8kHz (see graph)3kHz12dB/Octave on LF18dB/Octave on HFKLIP Overload Tweeter Protection CircuitK-8-E 8" WooferK-103-TI-KP 1" Titanium Diaphragm Compression Driver3/4" MDFFive-way Binding Post9.813" (24.925cm)18.813" (47.785cm)11.313" (28.735cm)4.063" (10.32cm) 22.5˚ Angled Box 19 lbs. (8.626kg)24 lbs. (10.896kg)Black, White and Raw MDFSB-102 Mounting Bracket13M, Half-space anechoic2AES Standard, continuous pink noise 50Hz-10kHz, 6dB peaks3At 1M at power handling power input4SPL at 1M, half-space anechoic with 2.83V input
Architectural SpecificationsThe KI-102 compact high power loudspeaker system shallinclude an 8" (203.2mm) K-8-E low-frequency transducer utilizing a 1.5" (38.1mm) voice coil and 20-ounce (622g) magnet,and a K-103-TI-KP 1" (25.4mm) titanium diaphragm high- frequency five-ounce (155.5g) magnet compression drivermounted on a 90˚ X 90˚ heavy-duty, injection-molded modifiedTractrix Horn. Signal shall be applied to the transducers via apassive internal frequency dividing network, incorporating aKLIP-circuit for signal overload protection of the high frequency transducer. The enclosure tuning shall be of a vented design.
Frequency response shall be 75Hz to 17kHz, ±4dB, with the -10dB point at 62Hz, measured at three meters, half-spaceanechoic. The dispersion angle shall be 90˚ X 90˚ nominal (referto graph). Directivity shall be 7dB (refer to graph). Sensitivityshall be 96dB SPL, measured at one meter, half-space anechoic,with a 2.83V input. Power handling shall be 100 watts (21.2volts), to AES standards, continuous pink noise, 50Hz to10kHz, 6dB peaks. Maximum continuous output at one metershall be 113dB SPL. Nominal impedance shall be 8 ohms, with4.5 ohms minimum at 8kHz. The internal passive crossover frequency shall be 3kHz, with slopes of 12dB/octave for thelow frequency and 18dB/octave for the high frequency. Full-range connections shall be made via standard five-waybinding posts, enabling direct stripped wire, lug, pin, single ordual banana plug interface.
The enclosure panels shall be CNC-fabricated, 3/4" MDF,assembled utilizing rabbet and dado joinery. Dimensions forthe enclosure shall be 18.813" (47.785cm) high by 9.813"(24.925cm) deep by 11.313" (28.735cm) front width and 4.063"(10.32cm) rear width in a symmetrical trapezoidal shape, withboth side panels angled at 22.5˚. Net weight shall be 19 lbs.(8.626kg). The top and bottom panels shall be radiused, with ametal perforated grille for structural integrity and protection ofthe transducers from impact and tampering.
Enclosure mounting shall be via internal top and bottom T-nutsfor the accessory Klipsch SB-102 “U”-shaped bracket. The enclosure shall be coated with lacquer-based primer and lacquer-based texture, with a black or white finish. The enclosure shall also be available unfinished in raw MDF.
The system shall be a Klipsch KI-102 loudspeaker.
S p e c i f i c a t i o n s
Front View
Left Side View Right Side View
Bottom View
Top View
11.313 Ref
2.031 Ref
22.5˚
2.031 Ref
4.063 Ref
9.81
3 Re
f
5.99
010
.250
10.2
50
3.688 3.688
5.37
5
This symbol represents the center of gravity.This symbol indicates mounting point, 1/4-20 UNC threaded hole.
Back View
2.007
18.8
13 R
ef
9.38
8
©2010 Klipsch Group, Inc. All rights reserved.Specifications subject to engineering changes.
3502 Woodview TraceIndianapolis, IN 46268
1-800-KLIPSCH • www.klipsch.com