Kia Sportage Navigation System Installation Powered by Smartauto24.com

1. Stock radio system

2. Remove the screw cover

3. Remove the two screws on left and right side

4. Remove the left air condition vent cover

5. Remove the right air condition vent cover

6. Remove the left air condition vent cover

7. Remove the both side

8. Remove the screws on the stock radio

9. Remove the frame on the stock radio

10. Remove the plugs

11. Remove the screws on the stock radio

12. Unplug the harnesses on stock radio

13. Disassembling completed!

14. Origital stock harnesses

15. Connect the harnesses to Smartauto24 navi system, it’s plug and play!

16. Connect other the cables and antennas for GPS and radio and camera etc..

17. Screw the navi system

18. install the frame

19. Install the left and right vent cover

20. Installation Complete!

Please send email to support@smartauto24.com if there is any question.