kingspan daylighting systems

48
Let the Sunshine and brighten your building IN Kingspan Daylighting Systems The simplest way to save energy, money and environment

Upload: juverdeanu-ioana-loredana

Post on 19-Jan-2016

65 views

Category:

Documents


3 download

DESCRIPTION

Daylighting Systems details

TRANSCRIPT

Page 1: Kingspan Daylighting Systems

Let the Sunshine and brighten your building IN

Kingspan Daylighting SystemsThe simplest way to save energy, money and environment

Page 2: Kingspan Daylighting Systems

2 Kingspan Daylighting Systems

Introduction

Daylighting is essential for healthy living, it is an established fact

that ample daylight improves a general feeling of health and well-

being in the workforce and improves productivity and safety.

Using as much natural light in buildings as

possible has many advantages over using

artifi cial lights, if its penetration is appropriately

controlled.

Light is not only an amount of energy,

it also provides us with the eans to reveal spaces

and volumes and interact with our environment.

Let the Sunshine in and brighten your building

Page 3: Kingspan Daylighting Systems

3

Daylight

savings

4KS1000

Hybrid

Thermalight

6

KS1000

Wall-Lite

30

KS1000

RW/GRP

24

Tubular

skylights

40Roof

Insulated

Upstands

42Energy

Effi cient

Buildings

44

Content

KS1000

Polycarb

Roofl ight

16

Page 4: Kingspan Daylighting Systems

4 Kingspan Daylighting Systems

In a typical building, lighting accounts

for 25-40% of energy consumption!

By allowing more natural light to penetrate

and controlling both its light and heat

components, the fi nancial savings could be

considerable.

Daylighting cuts energy use and pollution.

Power plants fueled by oil, coal and gas dump

thousands of tons of pollutants into the environ-

ment every day. By cutting demand for energy

production, we cut pollution, too.

Studies have proven daylighting makes

employees more comfortable and productive.

Reduced absenteeism, employee satisfaction

and higher productivity are all bottom line benefi ts

from the use of natural daylighting. An increase

of just 1% in productivity provides enough

fi nancial savings to a company to pay their entire

energy bill.

In addition to its health and fi nancial benefi ts,

natural light also provides an almost “perfect

white light” that has a number of visual benefi ts.

Best of all, natural light is “of course, plentiful.

People love natural light. Subconsciously, unknowingly, we seek out sunlit places and enjoy spend-

ing time in natural light. Beyond this desire, however, are some tangible benefi ts to adding natural

daylighting into buildings:

Daylight savings

of roof area (prismatic daylighting) reduces lighting

energy demand by during daylight hours.

Page 5: Kingspan Daylighting Systems

5Let the Sunshine in and brighten your building

Bright Benefi ts

The primary reason for including wall&roofl ights

is to provide a bright, naturally lit interior and

reduce the requirement for artifi cial lighting.

Daylight has many advantages over artifi cial

light - not least the fact that it is a completely

free, unlimited natural resource. Whilst artifi cial

light is essential, it’s provision uses a lot of energy,

so reducing the requirement will dramatically cut

energy use, and the CO2 emissions which result

from this.

Light panels save energy

and reduce carbon emissions.

Can replace electric lighting 70 to 80%

of the daylight hours while producing

much less heat than electric lighting.

Improve employee morale

Reduce absenteeism

Reduce errors

Improve product quality

Increase productivity

Increase sales in retail stores up to 40%

Kingspan Roof & Wall Light Panels

TABLE 2

Climate Zone City Offi ce School Warehouse Retail

MDS Athens, GR 1.91 2.38 2.55 5.09MDN Split, CR 2.07 2.55 2.55 4.45ALS Innsbruck, AT 1.82 2.07 2.07 3.51PAN Debrecen, HU 1.75 1.91 1.85 3.33CON Warsaw, PL 1.60 1.70 1.70 3.03ATN Bremen, DE 1.44 1.55 1.48 2.69

Energy Cost Savings €/yr/m2, by Climate Zone, City and Building Type*

TABLE 1 Simple Payback Period, years, by Climate Zone and Building Type

Climate Zone City Offi ce School Warehouse Retail MDS Athens, GR 36 30 6.2 3.9MDN Split, CR 37 31 7.7 4.5ALS Innsbruck, AT 40 37 9.6 5.6PAN Debrecen, HU 41 38 10.2 6.1CON Warsaw, PL 43 40 10.8 6.6ATN Bremen, DE 44 41 11.4 7.2

Depending on climate and building type,

toplighting can save between 1,4 - 5,0 EUR/ m2 per year!

MDS - Mediterranean South, MDN - Mediterranean North, ALS - Alpine South, PAN - Pannonian, CON - Continental, ATN - Atlantic North* Calculated taking into consideration average energy cost of 1 kWh =0,16 € for all these cities/countries

(Source: Eurostat)

Page 6: Kingspan Daylighting Systems

6 Kingspan Daylighting Systems

Introduction

Every workplace should have suitable and suffi cient

lighting, which should, so far as is reasonably prac-

tical, be by natural light. The most effective method

of providing even, consistent daylight, particularly

in large buildings, is through roofl ights, which are

up to three times more effective than windows

around the perimeter of the building.

Diffused lighting should be used to provide

even light distribution and avoid glare.

Energy savings is the most easily quantifi ably

of the benefi ts. We found that an economically

optimum toplighting system using skylights saved

35-55% of annual lighting energy while having

a much smaller impact on both heating

and cooling energy consumption.

Lower your energy bills up to 55 % with Kingspan

Hybrid Roofl ights.

KS1000 Hybrid ThermalightNatural Light Trapezoidal

Translucent System

APPLICATION FACTORY, WAREHOUSE ENVIRONMENTS

ROOF PITCH 6 DEGREES OR ABOVE

LIGHT TRANSMISSION 55-65 %

KS1000 RW/HTL offers excellent interior

levels of natural light without compromising

the performance of the building. This can help

to lower both energy bills and CO2 emissions.

KS1000 RW/HTL

Page 7: Kingspan Daylighting Systems

7Let the Sunshine in and brighten your building

Application

KS1000 RW/HTL is a translucent roof element

that allows natural daylight into buildings,

whilst maintaining thermal effi ciency and

aesthetic appearance. This is a product

with GRP top sheet and polycarbonate

bottom sheet combination for buildings

with Kingspan RW Roof panel where

the thermo insulation and the designed

surface is required.

The KS1000 RW/HTL is UV resistant, light-

weight and offers better U-value (1,34 - 2,12

W/m2k), designed surface and form offering

designers and installers choice of freedom to

create energy effi cient buildings of distinction.

System Benefi ts

U-value is 1,34 W/m2K

(with 32 mm polycarb sheet)

Better light transmission

UV resistant

Available of the range of colours

(clear, opal, brass)*

Factory manufactured

Available lengths from 1 m up to 6,25 m

(total length with cutback)

Modular width is 1000 mm

(the same as roofpanel)

Lightweight and durable

Factory fi tted PET spacers to facilitate faster

installation and reduce site wastage

Manufactured sites are ISO 9001: 2008,

ISO 14001 (Environmental)

Page 8: Kingspan Daylighting Systems

8 Kingspan Daylighting Systems

Detail Of The Profile

333mm 333mm 333mm

1000mm

GRP top sheet

sealant (site applied)

Closed cell PVC sealant

(factory applied)

Polycarb sheet with polycarb cover profiles

on the two end part (factory applied)

sealant (site applied)

Filler foam in the end part of rooflight

Available Lengths

Standard lengths are from 1,25 to 6,25 m.

The shape of the GRP top layer is same

as the shape of KS1000 RW roof panel.

Product Tolerances

Thermal Performance

The thermal insulation (U value) for KS1000 RW/HTL

is 1,34 to 2,12 W/m2K.

Fire Performance

For detailed information please contact local

Kingspan Technical Department.

Light Transmission

Seals and Fillers

KS1000 RW/HTL is fi tted with PVC sealing tape on

side laps (factory applied) and anti-condenstation

tape P19 (30x8) on panel end laps (applied on site).

Product Data22 666444 22

Length +/- 10 mm (fi nished product)

Width +/- 10 mm (polycarbonate)

Thickness +/- 2 mm (fi nished product)

KS

10

00 H

ybrid

Therm

alig

ht

KS1000

Hybrid Thermalightapproximately 55-65 %

Panel thickness 16 25 32

Weight (kg/m2) 5,0 5,9 6,6

Page 9: Kingspan Daylighting Systems

9Let the Sunshine in and brighten your building

Packing

The Hybrid Roofl ights are stacked weather

side to weather side (to minimise palette

height), protected with foil and edge covers.

Delivery

All deliveries (unless indicated otherwise)

are by road transport to project site.

Off loading is the responsibility of the client.

Installation

Site assembly instructions are available

from Kingspan.

Safety

NOTE: In the interest of safety, you should NEVER

walk on a roofl ight no matter what grade of con-

struction it may be.

Page 10: Kingspan Daylighting Systems

10 Kingspan Daylighting Systems

at 300mm

at 300mm

at 300mm

PVC sealing tape

(factory applied)

KS1000 RW

Roof purlin

at 300mm

KS 1000 RW/HTL

Roof purlin

KS1000 RW

KS 1000 RW/HTL

03

P

19

P 243

K

08

P

08

P

21

P

21

P

29

P

242

K

19

P

27

P

Construction details

KS

10

00 H

ybrid

Therm

alig

ht

Roofl ights KS1000 RW/HTL

Side Laps

KS1000 RW panel to KS1000 RW/HTL

Side Laps

KS1000 RW/HTL to KS1000 RW panel

Page 11: Kingspan Daylighting Systems

11Let the Sunshine in and brighten your building

B

B

A

A

150 - 300

50

30

rivet "bulbtite"

type between

crowns

KS1000 RW/HTL

callote

"overlay"

of distance profile

KS1000 RW

distance profile

support

fasteners

(distance profile to purlin)

additional support

if purlin width is < 100 mm

27

P

08

P

04

P

21

P

at 300mm

End Lap Detail

Upslope - KS1000 RW panel to RW/HTL

Section A-A

Section B-B

Fastener Locations RW/HTL

Page 12: Kingspan Daylighting Systems

12 Kingspan Daylighting Systems

KS1000 RW/HTL

calotte

"overlay"

of distance profile

distance profile

support

fasteners (distance

profile to purlin)

additional support

if purlin width is < 100 mm

30

50150 - 300

B

B

A

A

KS1000 RW

at 300mm

03

P

04

P

21

P

08

P

Construction details

KS

10

00 H

ybrid

Therm

alig

ht

End Lap Detail

Downslope - RW/HTL to KS1000 RW panel

Section A-A

Section B-B

Fastener Locations RW/HTL

Page 13: Kingspan Daylighting Systems

13Let the Sunshine in and brighten your building

B

B

A

A

30

30

150 - 300

"overlay"

of distance profile

distance profile

support

fasteners

(distance profile to purlin)

additional support

if purlin width is < 100 mm

callote

distance profile

support

side

flashing

side

flashing

rivet "bulbtite"

type between crowns

21

P

21

P

27

P

08

P

04

P

End Lap Detail

RW/HTL to RW/HTL

Section A-A

Section B-B

Fastener Locations RW/HTL

Page 14: Kingspan Daylighting Systems

14 Kingspan Daylighting Systems

A

A

KS1000 RW/HTL

callote

"overlay"

of distance profile

distance profile

support

fasteners

(distance profile to purlin)

04

P

08

P

Construction details

KS

10

00 H

ybrid

Therm

alig

ht

Intermediate Detail

RW/HTL

Section A-A

Fastener Locations RW/HTL

Page 15: Kingspan Daylighting Systems

15Let the Sunshine in and brighten your building

Page 16: Kingspan Daylighting Systems

16 Kingspan Daylighting Systems

Introduction

Sustainability is the latest buzzword in not just

the construction industry, but in the wider environ-

ment too. Sustainability however is far from just

being a ‘fad’ it is a way of living and constructing,

to help preserve the environment in which we live.

There are indeed many ways of acting sustainably,

but one of the easiest and cost effi cient ways is to

reduce the energy that we use.

How though, do you reduce the amount

of artifi cial light yet maintain a workable level

of lighting? The answer is to incorporate roofl ight

systems into roof constructions.

By allowing more natural light in to a building,

the need for artifi cial lighting is reduced.

The benefi ts of using roofl ights go further than

just reducing our energy consumption; research

has shown that increased levels of daylight can

aid health, learning and also increase productivity.

The Kingspan Polycarb Roofl ight allows natural

light to penetrate in to the building, therefore

reducing the need for artifi cial lighting.

The roofl ight system, which is designed for use

with the KS1000 RW system, is made from

polycarbonate, a lightweight, high performance,

durable plastic. It has superior UV resistance and

will not discolour over time coupled with a U-value

of 1.64W/m²K.

KS1000 Polycarb Roofl ightNatural Light Trapezoidal

Translucent System

APPLICATION FACTORY, WAREHOUSE ENVIRONMENTS

ROOF PITCH 7 DEGREES OR ABOVE

LIGHT TRANSMISSION UP TO 63 %

One way of reducing the energy we use

is to reduce our reliance on artifi cial lighting

to light our buildings.

Page 17: Kingspan Daylighting Systems

17Let the Sunshine in and brighten your building

Application

The following specifi cation is for the Kingspan

Polycarb Roofl ight system used for normal

factory or warehouse environments, with

a roof pitch of 7 degrees or above after

defl ection and where the occupants

or processes do not add signifi cant

quantities of water to the air.

System Benefi ts

Thermal performance: U-value 1.64W/m2K

Excellent light transmission – up to 63%

to EN410 standard

Available as either clear or opal fi nish

Available in lengths of 1.8 – 6.44m

Fire Performance – Class 1Y

Single component: fast installation leading

to accelerated build speed

Simple to fi x: no glazing experience necessary

Lightweight and durable

Cost effective

Recycling

The Kingspan Polycarb Roofl ight is 100%

recyclable, which means that at the end of its

life, it can be completely recycled unlike many

composite roofl ights in which only certain

elements can be recycled.

Substantial energy savings can be made

by using waste materials rather than raw materials,

these energy savings can be made from reducing

transportation emissions and the processing

of raw materials.

The amount of material that ends up in landfi ll

is reduced. This not only prolongs the life

of the currently diminishing landfi ll sites but

also reduces the amount of gases released

in to the atmosphere from this process.

Polycarbonate also has a scrap value, potentially

rendering the process of removing and disposing

of the panel at end of life cost neutral/positive.

Therefore using a 100% recyclable polycarbonate

roofl ight has both economic and environmental

benefi ts.Kingspan Polycarb Roofl ights allow natural light

to penetrate in to the building, therefore reducing

the need for artifi cial lighting.

Through recycling, a number

of benefi ts can be achieved.

Page 18: Kingspan Daylighting Systems

18 Kingspan Daylighting Systems

Polycarb Rooflight - Application with KS1000 RW

1000mm

333mm333mm

Dim

A

Dim

B

333mm

35m

m

End Lap Cut Back

StandardCut back150mm

Panel end lap

Available Lengths

Kingspan Polycarb Roofl ight panels are available

in standard lengths from 1,175 - 8,0 metres.

Longer lengths can be manufactured on request.

Dimensions & Weight

Product Tolerances

Thermal Performance

The thermal insulation (U value) for KS1000 PC

is 1.64 W/m2K.

Fire Performance

For detailed information please contact local

Kingspan Technical Department.

Light Transmission

Seals and Fillers

A magnetic 0.9mm PVC 30 mm wide support

block is supplied loose and is to be fi tted at purlin

(Kingspan Multibeam) positions. 20mm vented

and blocking tapes are applied to either ends

of the polycarbonate box to reduce the risk

of condensation.

Product Data22 66444 222

Cut to Length (mm) –3 +3

Liner Sheet Length (mm) –3 +3

Thickness (mm) –3 +3

End Square (mm) –5 +5

Dimension A - core thickness nominal (mm) 20

Dimension B - overall dimension (mm) 55

Weight kg/m2 3.3

Clear Polycarbonate

63% light transmission to EN410

76% solar transmission to DIN 67507

Opal Polycarbonate

59% light transmission to EN410

67% solar transmission to DIN 67507

KS

10

00 P

oly

carb

Ro

ofl i

ght

Page 19: Kingspan Daylighting Systems

19Let the Sunshine in and brighten your building

Packing

Standard Packing

Kingspan Polycarb Roofl ights are stacked in-

terleaved (to minimise pack height). The top,

bottom, sides and ends are protected with

foam and timber packing and the entire pack

is wrapped in plastic. Spacers are provided

loose in packs, typical maximum pack height

is 1100 mm.

Delivery

Road Freight

All deliveries (unless indicated otherwise) are

by road transport to project site. Unloading

is the responsibility of the customer.

Sea Freight

Fully timber crated packs are available on

projects requiring delivery by sea freight

shipping, at additional cost. Alternatively,

steel containers can be used. Special loading

charges apply.

Installation

All fasteners, seals and fi llers to be of correct

specifi cation and installed as indicated in the

Kingspan Polycarb Roofl ight Installation

Guide.

Fasteners to be checked and adjusted if nec-

essary to ensure they are weather tight and

external roofl ight facing is not distorted.

Safety

The contractor is to determine and use a safe system

of working throughout the installation and construction

period which complies with the HSA or HSE and CDM

requirements. Crawling boards should be used when

fi xing roofl ights.

NOTEIn the interest of safety, you should never walk

on a roofl ight no matter what grade or construction

it may be.

Page 20: Kingspan Daylighting Systems

20 Kingspan Daylighting Systems

End Lap Detail

Kingspan Polycarb Rooflight Panel Tail Stitcher Locations

Note: Project specific construction details must be used.

Side Lap Detail

Kingspan Polycarb Rooflight Primary and Side Lap Fasteners

4 No. main fixings withstorm washers

4 No. main fixings withstorm washers

KS1000 RW insulated roof panel

Kingspan Polycarb Rooflight

Site appliedspacer

Direction of layPVC painted steel strip(factory fitted)

30 min

Site applied

magnetic spacer4 No. main fixings withstorm washer in eachcrown location, perrooflight, per purlin

Kingspan Polycarb

Rooflight

Side lap stitched at 300mmcentres with 6.3mm x 25mmstitching screws with 19mmwashers

Side lap stitched at 300mmcentres with 6.3mm x 25mmstitching screws with 19mmwashers

Kingspan Polycarb Rooflight to Panel Side Lap Panel to Kingspan Polycarb Rooflight Side Lap

6 x 5mm butyl rubbersealant on weather side

6 x 5mm butyl rubbersealant on weather side

PVC painted steel strip(factory fitted)

6 x 5mm butyl rubber sealant appliedin continuous unbroken length at sidelap to weather side of stitching screw

6 x 5mm butyl rubber sealant appliedin continuous unbroken length at sidelap to weather side of stitching screw

Side laps stitched at max 300mm c/cs with“Mega-stitcher” screws (typ 6.3mm dia x

25mm long) with 19mm dia washers

Side laps stitched at max 300mm c/cs with“Mega-stitcher” screws (typ 6.3mm dia x25mm long) with 19mm dia washers

End lap stitchers onlyinserted where rooflight endlaps over KS1000 RW panel

PVC painted steelstrip (factory fitted)

Construction details

KS

10

00 P

oly

carb

Ro

ofl i

ght

Page 21: Kingspan Daylighting Systems

21Let the Sunshine in and brighten your building

End Lap Detail

Kingspan Polycarb Rooflight to KS1000 RW Panel

End laps crown stitched 2 timeswith “Mega-stitcher” screws(typ 6.3mm dia x 25mm long)with 19mm dia washers

KS1000 RW insulated roof panel

150mm end lap

50mm

30 min 30 min

50mm

Kingspan Polycarb Rooflight

4 No. main fixings with storm washer in eachcrown location, per rooflight, per purlin

Site applied magnetic spacer

Additional run of 6 x 5mm butyl rubber sealant

3 runs of 6 x 5mm butyl rubbersealant applied in continuousunbroken lengths at end lap

KS1000 RW Panel to Kingspan Polycarb Rooflight

End laps crown stitched 2 timeswith “Mega-stitcher” screws(typ 6.3mm dia x 25mm long)with 19mm dia washers

150mm end lap

50mm

30 min 30 min

50mm

Nominal 15mm

Minimum 10mm

KS1000 RW insulated roof panel

4 No. main fixings with stormwasher in each crown location,

per rooflight, per purlin

3 runs of 6 x 5mm butyl rubbersealant applied in continuousunbroken lengths at end lap

Site applied magnetic spacer

Kingspan PolycarbRooflight

Page 22: Kingspan Daylighting Systems

22 Kingspan Daylighting Systems

Note: Project specific construction details must be used.

End Lap Detail

Kingspan Polycarb Rooflight to Kingspan Polycarb Rooflight

Intermediate Detail

Intermediate Purlin Fasteners

150mm end lap

50mm

30 min 30 min

50mm

Nominal 15mm

Minimum 10mm

Kingspan PolycarbRooflight

4 No. main fixings with storm washer in each crownlocation, per rooflight, per purlin

3 runs of 6 x 5mm butyl rubbersealant applied in continuousunbroken lengths at end lap

Site applied magnetic spacer

Kingspan PolycarbRooflight

Additional run of 6 x 5mmbutyl rubber sealantEnd laps crown stitched 2 times with “Mega-stitcher” screws

(typ 6.3mm dia x 25mm long) with 19mm dia washers

Kingspan Polycarb Rooflight

Site applied magnetic spacer

Position of 4 No. main fixings with 19mmdia. and storm washers to crowns

30 min

Construction details

KS

10

00 P

oly

carb

Ro

ofl i

ght

Page 23: Kingspan Daylighting Systems

23Let the Sunshine in and brighten your building

Intermediate Detail Intermediate Spacer Location

The innovative spacer is magnetic and supplied loose.

This allowsroofl ights to be supplied without having

to detail intermediate purlins and avoids problems

with purlin misalignment.

Page 24: Kingspan Daylighting Systems

24 Kingspan Daylighting Systems

KS1000 RW/GRP

APPLICATION ALL TYPES OF BUILDINGS

ROOF PITCH 6 DEGREES OR ABOVE

LIGHT TRANSMISSION UP TO 70%

Application

The KS1000 RW/GRP are factory assembled

double skin roofl ights which can be used

with KS1000 RW where the roof slope is 6°

(10%) or more. Maximum availble panel length

is 6500 mm including overlap. Roofl ight panels

can be laid as chequerboard or in ridge following

roof inclination, roofl ight panels layout infl uences

daylight spread inside the building.

System Benefi ts

Excellent light transmission - up to 70%

to EN410.

Available in lengths up to 6,5 m.

Side Lap sealants factory applied

Single component: fast installation leading

to accelerated build speed.

Simple to fi x and no glazing experience

necessary.

Lightweight and durable.

No need to use spacers – the same thickness

as panel

Manufacturing sites are ISO 9001:2008 (Quality)

and ISO 14001 (Environmental) accredited.

Natural Light Trapezoidal

Translucent System

Page 25: Kingspan Daylighting Systems

25Let the Sunshine in and brighten your building

Available Lengths

KS1000 RW/GRP roofl ights are available in standard

lengts from 1.8 to 6.5 metres.

Product Tolerances

Thermal Performance

The thermal insulation (U value) for KS1000 RW/GRP

all thicknesses is 3.0 W/m2K.

Fire Performance

KS1000 RW/GRP roofl ights comply

with National Building Regulations and Norms.

Light Transmission

Seals and Fillers

Side Lap Sealant (Site Applied)

All external side laps to be sealed with 4 mm

diameter butyl rubber sealant tape.

All internal side laps to be sealed with a site

applied silicon sealant.

Dimensions & Weight

Product Data 222 6644 22

KS1000 RW/GRP approximately 70%

and are opaqueLength ±10 mm

Width ±3 mm

Thickness ±2 mm

End Square ±10 mm

1 000 mm - modular width

333,3 mm 333,3 mm 333,3 mm

Panel thickness 50 60 70 80 100

Weight (kg/m2) 3,70

KS

10

00 R

W/G

RP

Page 26: Kingspan Daylighting Systems

26 Kingspan Daylighting Systems

Packing

Standard packing - road transportation

KS1000 RW panels are stacked weather

side to weather side (to minimise palette

height).The top, bottom, sides and ends

are protected with foam and timber packing

and the entire palette is wraped in plastic.

The number of panels in each pack depends

on panel thickness and length.The table

below is shown as a guide. Quantities are

reduced for exceptionahy long panels.

Typical palette height is 1,100 mm.

Delivery

All deliveries (unless indicated otherwise)

are by road transport to project site.

Off loading is the responsibility of the client.

Installation

Site assembly instructions are available

from Kingspan.

Kingspan will arrange training of the site fi tters

and supervisors if requested.

Safety

The contractor is to determine and use a safe system

of working throughout the installation and construction

period which complies with the HSA or HSE and CDM

requirements. Crawling boards should be used when

fi xing roofl ights.

NOTEIn the interest of safety, you should never walk

on a roofl ight no matter what grade or construction

it may be.KS

10

00 R

W/G

RP

Panel core thickness (mm) 40 50 60 70 80 100

Number of panels in package 17 15 13 11 9 7

Page 27: Kingspan Daylighting Systems

27Let the Sunshine in and brighten your building

Construction details

Butyl sealing tape or PVC

sealing tape (site applied)

Roof purlin Anti-condensation tape

(site applied)

Side lap stiching screw

(at 300-500 mm) - P03

Sealing tape (P17)

Self-tapping or self-drilling screw

with thread under head

and sealing washer Ø29 - P02p

RWRW/GRP

ModuleModule

d

RW RW/GRP

Self-tapping or self-drilling screw

with thread under head and sealing washer Ø29

Sealing tape (P17) Roof purlinAnti-condensation tape (site applied)

Butyl sealing tape or PVC

sealing tape (site applied)

Lap-Lox/Tramslap

stiching screw

(at 300-500 mm) - P27

LD

d

Module Module

Side Laps

RW/GRP to KS1000 RW panel

Side Laps

KS1000 RW panel to RW/GRP

Page 28: Kingspan Daylighting Systems

28 Kingspan Daylighting Systems

KS

10

00 R

W/G

RP

Section A-A

Direction of prevailing wind Direction of lay

RW

P

50

50

a a

18 P

17 P

04p P

04 P

27 P

34 P

A

A

RW/GRP

or permanently

elastic sealant

9 fasteners

per end lap

PE profiled sealing filler

(factory applied)

Note:

a - according to structural/static requirements

P - cut back dimension 250 mm

Section A-A

Direction of prevailing wind Direction of lay

End Lap Detail

Upslope - KS1000 RW panel to RW/GRP

Fastener Locations RW / GRP

Page 29: Kingspan Daylighting Systems

29Let the Sunshine in and brighten your building

Construction details

03p P

02p P

01 P

34 P

18 P

17 P

RW

50

50

a a

P

RW/GRP

B

B

9 fasteners

per end lap

or permanently

elastic sealant

PE profiled

sealing filler

(factory applied)

lub

Note:

a - according to structural/static requirements

P - cut back dimension 250 mm

Direction of prevailing wind

Section B-B

Direction of lay

End Lap Detail

Downslope - RW/GRP to KS1000 RW panel

Fastener Locations RW/GRP

Page 30: Kingspan Daylighting Systems

30 Kingspan Daylighting Systems

Introduction

The Kingspan Wall-Lite is a translucent wall

panel that allows natural daylight into buildings,

whilst maintaining thermal effi ciency and aesthetic

appearance.

This can help to lower both energy bills and CO2

emissions, whilst allowing occupants to enjoy

high levels of daylight. The system is suitable for

use as an alternative to traditional vertical daylight-

ing systems and need not restrict design options

as it integrates fully, with Kingspan’s range of

Architectural Wall panels, Kingspan OptimoTM,

and Kingspan’s range of complete wall and

façade systems including the ThermabrickTM,

Thermastone and Thermatile systems.

The Kingspan Wall-Lite is UV resistant,

lightweight and offers a U-value of 1.26 W/m2K

offering designers and installers choice of freedom

to create energy effi cient buildings of distinction.

KS1000 Wall-LiteNatural Light Architectural

Translucent System

APPLICATION ALL TYPES OF BUILDINGS

THERMAL RESISTANCE U = 1.26 W/m2K

LIGHT TRANSMISSION UP TO 55%

The Kingspan Wall-Lite offers excellent interior

levels of natural light without compromising

the performance of the building.

The Kingspan

Wall-Lite panel

Page 31: Kingspan Daylighting Systems

31Let the Sunshine in and brighten your building

Application

Kingspan Wall-Lite is suitable for applications

on all types of buildings and is suitable for

both vertical and horizontal applications.

It is a single component system and does

not require glazing experience to fi t,

thereby reducing installation times and

the need to rely on skilled sub-contractors.

System Benefi ts

U-value 1.26 W/m2K

Excellent light transmission - up to 55%

to EN410.

Up to 25 years life expectancy.

Fully recyclable at end of life with

minimal impact on the environment.

Factory manufactured: ensures

excellent fi t with all Kingspan

Architectural Wall Panel and Optimo™

systems.

Available in a range of colours.

High degree of colour fastness

over guaranteed period.

Available in lengths from 1.8m up to 8m.

Fire properties: Class 1Y to BS 476 Part 7.

Single component: fast installation

leading to accelerated build speed.

Simple to fi x and no glazing

experience necessary.

Lightweight and durable.

Excellent impact and thermal

performance compared to glass

glazing systems.

Factory fi tted aluminium spacers

to facilitate faster installation

and reduce site wastage.

Manufacturing sites are ISO 9001:2008

(Quality) and ISO 14001 (Environmental)

accredited.

Page 32: Kingspan Daylighting Systems

32 Kingspan Daylighting Systems

Available Lengths

Standard length of panels is from 1,0 m to 6,0 m.

Dimensions & Weight

Product Tolerances

Thermal Performance

The thermal insulation (U value) for KS1000 WL

is 1.26 W/m2K.

Fire Performance

For detailed information please contact local

Kingspan Technical Department.

Light Transmission

Seals and Fillers

KS1000 WL is fi tted with PVC sealing tape on side

laps (factory applied) and anti-condenstation tape

on panel end laps (applied on site).

Product Data222 6644 2222

Cut to Length:

Panels up to 6 m ±4 mm

Panels from 6 to 12 m ±6 mm

Panels longer than 12 m ±8 mm

Panel Width ±3 mm

Panel Thickness:

Thickness d ≤ 50 mm ±2 mm

Thickness 50 mm < d < 100 mm +3 mm −2 mm

Thickness d ≥ 100 mm +3 mm −3 mm

Right angle cut end tolerance max. 5 mm

Panel bow (Δ1 + Δ2) / 2 ≤ 10 mm

D – core thickness [mm] 38

Weight [kg/m²] 4,7

KS1000 WLapproximately 55%

and are opaque

KS

10

00 W

all-

Lite

Page 33: Kingspan Daylighting Systems

33Let the Sunshine in and brighten your building

Packing

Standard Packing

KS1000 WL panels are packed in the stacks

on wooden pallets. The top, bottom, sides

and ends are protected with polystyrene

spacers and the whole package is wrapped

with foil.

Delivery

Road Freight

All deliveries (unless indicated otherwise) are

by road transport to project site. Unloading

is the responsibility of the customer.

Installation

Installation instructions are available in Kingspan

Technical Department. We also provide, on request,

trainings for contractors.

Colour Range

Kingspan Wall-Lite is available in a range of colours to give designers choice and freedom.

Safety

The maximum spacing of supports for WL

panels installed as a single band highlight is 6 m.

Maximum spacing for WL panels installed

in series is 3 m.

BUILDING REGULATIONS

KS1000 WL panels meet the requirements

of national building standards

and regulations.

Infra-red (IR) Absorbing Lights

This range of Kingspan Wall-Lites absorb

greater levels of infra-red light which

reduces solar gain. These can allow for

greater control of ambient temperature

within the building providing a possible

reduction in HVAC usage.

Clear Opal Blue Green

Purple Red Orange Yellow

IR Green IR Blue

*The only Standard color is Clear. If you need other colors, please contact Kingspan fi rst.

Cl

PP ll

O l

R dR d

Bl

OO

IR G

G

YY llll

IR Bl

Page 34: Kingspan Daylighting Systems

34 Kingspan Daylighting Systems

Spacing profi les

Available options for the junction

Wall-Lite to AWP panel

KS1000 WLThickness

Spacer profi lesHight

KS1000 AWP Thickness

38 mm 60,5 mm 100 mm

38 mm 40,5 mm 80 mm

38 mm 30,5 mm 70 mm

38 mm 20,5 mm 60 mm

KS

10

00 W

all-

Lite

40

60,5

60

40,5

80

30,5

20,5

80

40,5

40

40

30,5

50

20,5

60

60,5

WL100PD_A WL100PD_B

Aluminium Spacer Profiles

Joint Detail

WL080PD_A WL080PD_B

WL070PD_A WL070PD_B WL060PD_A WL060PD_B

male jointfemale joint

factory applied sealant

Page 35: Kingspan Daylighting Systems

35Let the Sunshine in and brighten your building

KS1000 AWP 100a) AWP/WL (profile A) b) WL/WL (profile B) a) WL/AWP (profile A)

KS1000 AWP 80a) AWP/WL (profile A) b) WL/WL (profile B) a) WL/AWP (profile A)

KS1000 AWP 70a) AWP/WL (profile A) b) WL/WL (profile B) a) WL/AWP (profile A)

KS1000 AWP 60a) AWP/WL (profile A) b) WL/WL (profile B) a) WL/AWP (profile A)

KS1000 WL

Scheme of the junction Wall-Lite to AWP panel using aluminum spacing profi les (type A or B)

Page 36: Kingspan Daylighting Systems

36 Kingspan Daylighting Systems

Wall-Lite Male Joint

Steel support

KS1000 AWP architectural wall panel horizontally laid

Factory applied weather seal

Concealed stainless steel fastener (min. 2 at intermediate supports)

Factory fitted aluminium spacer A

KS1000 WL horizontally laid

PVC barrier tape neatly applied between aluminium spacer andKingspan Multibeam cladding rail to prevent bi-metallic corrosion

Wall-Lite Female Joint

Steel support

KS1000 AWP architectural wall panel horizontally laid

PVC barrier tape neatly applied between aluminium spacer andKingspan Multibeam cladding rail to prevent bi-metallic corrosion

KS1000 WL horizontally laid

Factory fitted aluminium spacer A

Factory applied weather seal

Concealed stainless steel fastener (min. 2 at intermediate supports)

Construction details

KS

10

00 W

all-

Lite

Page 37: Kingspan Daylighting Systems

37Let the Sunshine in and brighten your building

Wall Abutment

Vertical Joint - Tophat Option A

Note: A vertically laid option is available from Kingspan enviro care® Technical Services on 0800 587 0090.

*Always ensure only polycarbonate compatible gun grade sealant is applied to Kingspan Wall-Lite.

KS1000 WL horizontally laid

Wall-Lite aluminium spacer

Stainless steel fastener

White profiled filler pushed between sheetingrail and bubble gasket after Wall-Lite is fixed in

place (fits between extruded aluminium spacers

Panel joint rail

Cladding rail

AWP joint filler and gun gradesealant sealed top and bottom*

‘Snap on’ receiver flashing

6mm dia. run of gun grade sealant*

4mm dia. butyl rubber sealant site applied

PIR board insulation site applied

KS1000 WV architectural wallpanel horizontally laid

Air seal - EPDM bubble gasket95x10mm.

Min. steel bearing face 130mm

Air seal - 6mm dia. bead of gun grade sealant*

Air seal - gun grade sealant to male joint*

Air seal - gun grade sealant to male joint

PVC barrier tape neatlyapplied between aluminiumspacer and cladding rail toprevent bi-metallic corrosion

Stainless steel fastener

Abutment flashing

Polyethylene backing rodwith silicone sealant

Air seal - 6mm dia. bead ofgun grade sealant

Wall-Lite aluminium spacer

4mm dia. butyl rubber sealant site applied

6mm dia. run of gun grade sealant*Bulb-Tite rivet @ 450mm centres to fix flashing toWall-Lite with optional coloured cap

KS1000 WL horizontally laid

White profiled filler bedded ingun grade sealant*

Internal closure flashing with 100mmoverlapped and air sealed joints

AWP joint filler and gun grade sealantsealed top and bottom*

‘Snap on’ cover flashing oroptional recessed cover flashing

Page 38: Kingspan Daylighting Systems

38 Kingspan Daylighting Systems

Horizontal Wall-Lite Junction with Verge

Air seal - 8mm dia. butyl rubber sealant

Air seal - 8mm dia. butyl rubber sealant

9mm x 3mm butyl rubber sealant

KS1000 RW insulated roof panel

Cleader angle

Galvanised steel pressing fixed to cleader angle

Apply film faced butyl tape to site rake cut

Face-fix @ max. 500mm centres

4mm dia. butyl rubber sealant

KS1000 WL horizontally laid

Panel joint rail

Concealed stainless steel fastener(min. 2 at intermediate supports

6mm dia. run of gun grade sealant*

Bulb-Tite rivet @ 450mm centres to fix flashingto Wall-Lite with optional coloured cap

Above Floor Level Drip Detail

KS1000 WL horizontally laid

Panel joint rail

Galvanised drip support angle

PIR board insulation

Apply PVC isolation tape betweenaluminium spacer and flashing

Panel bearer at ends of Wall-Lite@ max. 1500mm centres between

Optional internal closure flashing tomask insulation from view

PIR board insulation with fire-rated canisterapplied insulation used to fill gaps, if required

Kingspan drip flashing

Air seal - continuous bead of gun grade sealant

Air seal - 6mm dia. bead of gun grade sealant

*Always ensure only polycarbonate compatible gun grade sealant is applied to Kingspan Wall-Lite.

Construction details

KS

10

00 W

all-

Lite

Page 39: Kingspan Daylighting Systems

39Let the Sunshine in and brighten your building

Page 40: Kingspan Daylighting Systems

40 Kingspan Daylighting Systems

TUBULAR SKYLIGHTSSUNPIPE®

SUNIZERTM

APPLICATION ALL TYPES OF BUILDINGS

THERMAL RESISTANCE 0-30 DEGREE

LIGHT TRANSMISSION UP TO 98 %

SUNPIPE®

Application

The SUNPIPE® is a revolutionary

new way to pipe natural daylight down from rooftop

into the building - to brighten areas from dawn

to dusk where daylight from windows cannot reach.

It is energy free, super refl ective tube even extends

through adjustable bends and has an internal mirror

fi nish that intensifi es and refl ects natural daylight

delivering free outdoor light to a room or area below

- where the light is evenly diffused by a translucent

ceiling fi xture. At ceiling level, the diffuser has the

ability to distribute the light in every direction, giving

an even spread of light throughout the room.

Sunpipes are supplied as complete system, with

roof aluminum insulated upstands and applicable

with Kingspan roof insulated panels. Due to the

shape of the Diamond dome, the SUNPIPE is self-

cleaning, since rainwater washes off any dust or dirt

and there are no crevices for dirt to collect.

System Benefi ts

No structural alterations required, easily fi ts be-

tween joists and rafters.

No maintenance required and will not leak.

Top dome is self-cleaning due to its shape and

eliminates condensation problems.

All SUNPIPE® systems are guaranteed for 10

years against faulty manufacture.

Few fi xings are required, normal single fi xing at

base of system.

Joints are sealed using aluminium tape.

Refl ection effi ciency up to 98 %!

Investment payback – 5-6 years.

Applicable with Kingspan roof insulated panels.

A SUNPIPE can be almost any length

that you wish, but loses 6% of light for every

metre of SUNPIPE. For very long SUNPIPEs,

a larger diameter should be used

Page 41: Kingspan Daylighting Systems

41Let the Sunshine in and brighten your building

Application

SUNIZER is absolutely unique structural

element distinguishing mainly for its utilization

purpose and its extremely high effi ciency.

Its uniqueness consists in using Fresnel lenses

which can affect the fi nal parameters very

favourably. Fresnel lenses multiply sunbeams

entering the system and then direct them

to the desired place.

Sunizer can be installed into both fl at

and pitched roofs. Suitable also for low-energy

buildings – the closed air column combined

with the thermal insulation around the tube acts

as an excellent insulating material.

System Benefi ts

Brings healthy daylight into the interior.

Excellent light multiplication and dispersion

thanks to the Fresnel lenses

Helps to meet the norms for illumination

of buildings with daylight.

Easy instalation - perfect installation system

into the roofs (0 -30°).

Brings fi nancial savings for saved electrical

energy.

Up to 90% energy saving – during the day

Night service – by LED diodes

or fl uorescent lamp.

Product Data22 6644 222

21P

spád

AL insulated upstand

a a

5050

min. 300

d

min 500

polycarbonatehead

crystalline head

L

D

Al sheet with layer of pure silver

Length (L): minimum 300 mm

Loss of lightness: 6 % for every 1 m

SUNIZERTM Tubular Skylight

Type Diameter (D)Illuminated

area

SP230 230 mm 7,0 m2

SP300 300 mm 14 m2

SP450 450 mm 22 m2

SP530 530 mm 40 m2

SP750 750 mm 50 m2

Page 42: Kingspan Daylighting Systems

42 Kingspan Daylighting Systems

ROOF UPSTANDS

APPLICATION ALL TYPE OF BUILDINGS

ROOF PITCH 0,5 DEGREE OR ABOVE

FAST INSTALLATION SINGLE COMPONENT

Aluminum Products

Application

Alumnum products, which are very effective

and easy for installation with faultless functionality,

can highlight the originality of any building.

Primary material used is aluminium sheet

with fi nal comaxit coating. This guarantees

a high quality and life time of the parts as well

as a colour range according to the request

of a customer.

Aluminum Upstands allow trouble

free sealing for installation on the roof.

As a fi nal product it does not require any

other fi nishing works.

System Benefi ts

High shape variability

Non standard shapes

Upstands for RW, FF, Top-dek and X-dek panels

Production to individual needs of a customer

Komaxit coating

Finished product, no other completion works

Insulated or non insulated

Optimal usage of Upstands is for RW panels

or for fl at roofs (TOP-DEK panels / X-dek),

alternatively according to the needs of a customer.

Page 43: Kingspan Daylighting Systems

43Let the Sunshine in and brighten your building

It is possible to produce various dimensions

to fit the building, for Velux and Fenestra roof

windows.

Can optionally be equipped with units for

daily ventilation (pneumatical or electrical).

An automatic, weather-activated control helps

to ease the operation.

Available in different dimensions and can be

also fi tted with electromotor. Light transmis-

sion form 63 -73 %. Thermal insulation from

1,6 -2,7 W/(m²K).

For delivery possibilities please contact Kingspan Accessories department.

For delivery possibilities please contact

Kingspan Accessories department.

Upstands for roof windows

Fire Dampers

Dome roofl ights

78 × 98

78 × 118

78 × 140

78 × 160

window

frame sizes:

100x100

100x200

120x120

150x150

Production sizes

(size of hole in the

roof):

100x100

100x200

120x120

150x150

Production sizes

(size of hole in the

roof):

Page 44: Kingspan Daylighting Systems

44 Kingspan Daylighting Systems

Kingspan is a leader in the fi eld of sustainable development.

Our long-time commitment to the issues of sustainability and energy

effi ciency is best characterized by the Trias Energetica model,

which promotes three steps towards sustainable energy production:

Reduce use

Use renewables

Be effi cient with the remaining resources

2 Maximise the use

of renewable energy

sources

1 Reduce demand

(energy saving)

3 Use fossil fuels

in the cleanest

possible way

ENERGY DEMAND

STEP ONE

Energy Effi cient Buildings

The implementation of Energy Performance

of Buildings Directive has forced energy effi ciency

into the design and operation of residential,

commercial and industrial buildings. The EPBD

requires that all buildings are labelled to show

their energy effi ciency.

With closed-cell, high performance insulation

constituting and integral part of the panel systems,

the IPN-insulated panels provide a particularly thermally

effi cient and economic method of constructing walls and

roofs of buildings, and ensure an unrivalled thermal per-

formance throughout the building’s operational lifetime.

The simplest way to reduce energy demand

and assure an A rating for a building is to use

IPN-insulated panel systems.

Testing and fi eld results show that IPN-insulated

panels - Kingspan core product - contribute

to sustainability and energy effi ciency in a variety

of ways.

Energy effi ciency. Insulated panels have a core

of continuous, rigid insulation for industry leading

R- and U-values with superior airtightness

performance, thereby preventing unnecessary

heat transfer.

Recycled and recyclable. The exterior skins

contain a substantial amount of recycled content,

and the panels themselves are recyclable.

Life cycle benefi ts. Insulated panels last as long

as the service life of a typical commercial building,

and continue to provide excellent thermal performance

throughout the building’s operational lifetime, which

is a key requirement for any sustainable solution.

Energy

Effi ciency

Rating

Page 45: Kingspan Daylighting Systems

45Let the Sunshine in and brighten your building

The development of sources of renewable energy is a crucial part of the strategy

to cut carbon emissions.

One of the key aspects for the success of integrating sources of renewable energy into

construction programmes is the ease with which they can be incorporated into building design.

Kingspan has a number of solutions which meet this criterion, starting with the building envelope itself.

STEP TWO

Renewable Energy

Kingspan designs, manufactures and supplies approximately

20 million m2 of insulated roof, wall and façade panels per

annum and works in close conjunction with leading building

investors, owners, developers, designers and construction

teams for the property market.

This capability has enabled us to introduce a range of fully

integrated solar photovoltaic solutions for roofs, walls and

façades from a single, trusted provider, eliminating multi-

sourcing, installation and building envelope integration risks.

Photovoltaic (PV) systems generate clean, infl ation proof

electricity, reduce energy costs and can generate electricity

to be fed into the national grid or used within the building

itself. Even if the sky is overcast, PV is proven to produce

electricity.

Every kW produced has zero-carbon emissions,

which signifi cantly reduces the carbon footprint. It limits

dependency on fossil or nuclear fuels and facilitates meeting

corporate social responsibility needs. Such an investment

could increase the saleable / rentable value of the building

and would enhance the building’s energy ratings.

Kingspan EnergiPanel is an innovative insulated solar

air heating system designed for roof and wall applica-

tions as a supplement to the main heating system.

Profi led hollows beneath the crowns allow air move-

ment up through the panel and the air is warmed by

the simple process of using the outer steel skin as

a solar energy absorber. The darker the external colour

of the panel the greater the solar absorption.

Because it is a single component system, Kingspan

EnergiPanel allows fast track construction, so the over-

all carbon footprint associated with the instal lation is

minimised. The system integrates seamlessly with other

panel systems from the Kingspan range and is available

in a range of colours.

The Kingspan EnergiPanel combines Kingspan’s

existing state of the art insulated panel techno-

logy with a tested and proven solar air heating

capability.

The EnergiPanel Solar Air Heating System has

the fl exibility of being either integrated with the existing

HVAC system or utilised in a standalone heating capac-

ity. It is available with the Kingspan Total Guarantee

covering both the thermal and structural performance.

Page 46: Kingspan Daylighting Systems

46 Kingspan Daylighting Systems

The fi nal step is to be effi cient with our remaining resources – where fossil fuels have to make up

the shortfall in energy supply, this should be done as cleanly and as sparingly as possible.

The aim of safeguarding the natural resources has led Kingspan to develop a range of solutions that

instead of consuming fossil-depleting energy, capitalize on the most natural of resources – sunlight.

STEP THREE

Reduce demand

The simplest way to save the energy is just to turn off the

lights.

This vision has compelled Kingspan to introduce a range of

products that bring the natural light into the buildings, thus

reducing the need for artifi cial, energy-consuming lighting.

The Kingspan Polycarb Roofl ight is designed for use with

the KS1000 RW insulated panel system.

• Made from polycarbonate – a lightweight, high perform-

ance, durable plastic, which will not discolour over time.

• Provides excellent light transmission, which makes it

possible to fully exploit the benefi ts of natural light.

• Allows for effi cient light diffusion, which helps avoid

hot spots and disperse light evenly in sections between

roofl ights.

The economy of using the Kingspan Polycarb Roofl ights is

amplifi ed by savings on lifecycle costs – once installed, the

roofl ights do not require spare parts or vigilant maintenance.

The Kingspan Polycarb Roofl ight is 100% recyclable and has

a scrap value, potentially rendering the process of removing

and disposing of the panel at end of life cost neutral/positive.

Harvesting daylight…

We could reduce our demand for electricity by thou-

sands of megawatts just by opening up our buildings to

daylight – and the Kingspan Wall-Lite, a translucent wall

panel, does exactly that.

A novel concept in sandwich panel façades, the

Kingspan Wall-Lite presents designers with a freedom

to create energy effi cient buildings of distinction. It is

simple to fi x, light and durable, features superior light

transmission and diffusion combined with excellent

insulation properties.

The Kingspan Wall-Lite provides a brilliant alternative to

traditional vertical daylighting systems. It is suitable for

both horizontal and vertical application on all types of

buildings, and integrates fully with Kingspan Architec-

tural Wall panels, Kingspan OptimoTM, and Kingspan’s

range of complete wall and facade systems.

Fully recyclable, the Kingspan Wall-Lite helps lower

both energy operating costs and CO2 emissions, whilst

allowing the buildings’ occupants to enjoy and benefi t

from high levels of daylight.

Research has shown that increased levels of daylight can

aid health, facilitate learning and increase productivity.

Polycarb Roofl ight Wall-Lite

Page 47: Kingspan Daylighting Systems

47Let the Sunshine in and brighten your building

Kingspan Insulated Panels is fully

committed to developing products

that are sustainable throughout their

lifecycle, from manufacture and

application to their disposal.

Kingspan continues to work with

BRE and leading waste management

companies to further quantify and

reduce the impact of its products.

Vision

Energy Effi cient Buildings

The research found that demolition results

in the insulation generally going to landfi ll – whether

it be PUR, PIR, rock fi bre or glass fi bre. In the light

of this conclusion, Kingspan Insulated Panels continues

to actively explore ways of stimulating the end-of-life

management of its panels, including an on-going

reduction in the environmental footprint of new

products to reduce the future legacy.

Kingspan Insulated Panels has adopted BRE’s

Environmental Profi les Assessment Methodology

to quantify the environmental impact of its panels.

Kingspan Insulated Panels is delighted that its

Architectural Wall Panel and Trapezoidal Roof and

Wall product range have all been reassessed under

the latest Green Guide to Specifi cation and achieved

‘A+’ ratings.

Roof Specifi cation*

High Performing Specifi cations Poor Performing Specifi cations

A+ A B C D E

Best Worst

Performing Performing

Roof Roof Specifi cations

Specifi cations

Wall Specifi cation†

High Performing Specifi cations Poor Performing Specifi cations

A+ A B C D E

Best Worst

Performing Performing

Roof Roof Specifi cations

Specifi cations

Kingspan KS1000 RW

0.42 Ecopoints

Kingspan KS1000 RW

0.47 Ecopoints

KS600/900/1000 AWP

0.53 Ecopoints

Low Pitched Roof: KS1000 RW Panel with insulation core manufactured at Holywell. Supported on cold rolled steel purlins and structural sections. Steel facings; generic organic coatings. Insulation 120mm core thickness.

External Wall: KS1000 RW Panel with insulation core manu-factured at Holywell, vertically laid. Supported on cold rolled steel rails. Steel facings; generic organic coatings. Insulation 70mm core thickness. KS600/900/1000 AWP Panel with insulation core manufactured at Holywell, horizontally laid. Supported on cold rolled steel rails and struc-tural frame. Steel facings; generic organic coatings. Insulation 80mm core thickness.

Commercial Cradle to Grave Diagrams

Page 48: Kingspan Daylighting Systems

Kingspan Sp. z o.o.

20 Przemysłowa St.

27-300 Lipsko

Phone: +48 48 378 31 00

Fax: 48 48 378 13 30

[email protected]

www.kingspan.pl

Kingspan, a.s.

Vážní 465

500 03 Hradec Králové

Czech Republic

Phone: +420 495 866 111

Fax: +420 495 866 100

[email protected]

www.kingspan.cz

Kingspan Kft.

2367, Újhartyán

Horka dűlő 1.

Hungary

Phone: +36 29 573 400

Fax: +36 29 573 410

[email protected]

www.kingspan.hu

Kingspan Insulated Roof, Wall & Facade Systems

IPN Core

Roof Systems

KS1000 RT

RoofTile

KS1000 X-DEK

FlatKS1000 TOP-DEK

Flat

KS1000 RW

Trapezoidal

Mineral Fibre Core Roofl ights

KS1000 RW/GRP

Trapezoidal

KS1000 FF/HTL

Trapezoidal

KS1000 PC

Trapezoidal

KS1000 RW/HTL

Trapezoidal

KS1000 FF

Trapezoidal

IPN Core

Architectural Wall Systems

Mineral Fibre Core

KS1000/1150/1200 FR

Through Fix

KS1000 WL

Wall-LiteKS1000 FH

Secret Fix

KS1150 FA Acoustic

Through Fix

KS1000 RW

Trapezoidal

KS1150 TL

Through Fix

KS1000 AWP

Secret Fix

KS1150 TF

Through Fix

Kingspan EnergiPanel

Solar Air

Heating System

02-2012