kleenguard* apparel · • silicone free, ideal for spray-painting • en 1073-2 approved for...
TRANSCRIPT
KLEENGUARD* Apparel A40 Liquid and Particle Protection Coverall
Protection against chemical splash and particles
• Film laminate technology provides barrier against a wide range of chemicals
• Particle protection holds out > 99% of fibres greater than 1 micron
• Strong triple stitched seams help protect against tearing
• Hood designed for respirator use and freedom of movement
• Full length zip, eases ability to get in / out of garment
• Ultra low-lint performance, film laminate and internal seams significantly reduce levels of lint
• Anti-static fabric EN 1149-1 for critical areas
• Silicone free, ideal for spray-painting
• EN 1073-2 approved for radioactive dust protection (1)
• Compressed packaging provides auto- dispensing system & reduces storage space
Suitable for general protectionagainst water-based or chemicalsplashes, liquids and dust particles.
KLEENGUARD* A40 Coveralls features adouble layer fabric for comfort, safety andstrength. A film coated outer layer resists splash and spray from many liquidsand dry particulates, while a cloth-like innerlayer of spunbond polypropylene is toughand abrasion-resistant.
Product Performance Data >
• Protection against dusts
• Protection against particulate matter
• Protection against radioactive particles (1)
• Protection against liquid aerosols, spray and light chemical splashes
Optimised for:
KLEENGUARD* A40 - Product Information
Fabric Tests
Abrasion resistance
Flex cracking resistance
Trapezoidal tear resistance
Puncture resistance
Tensile strength
Resistance to liquids
Resistance to penetration
Resistance to ignition
Seam strength
Surface resistivity
Class(3) or result
6
4
2
2
1
3/3
3/3
PASS
3
< 5 x 1010 ohm
Product Performance Data
Whole Garment Tests
Resistance to penetration by liquids (mist test)
Determination of resistance of suits to penetration by aerosols and fine particles
Radioactive dust
EN 468 (modified)
pr ISO 13982-2
EN 1073-2:2002
PASS
Average TotalInward Leakage 5.09%
1
No Quibble Guarantee: The quality and consistency of our products allows us to offer a money back or replacement of stock guarantee for any performance troubles with our products.
(Tests performed with taping at wrists, ankles and hood) (1) Full chemical test data: http://www.kcprofessional.co.uk/resources/chemical-protection-guide (2) Provides no protection against radioactive radiation
Guaranteed support: The answer to any query you may have on any of our products is just a phone call or email away. Australia 1800 647 994 New Zealand 0800 447 814 Email [email protected] www.kcprofessional.com
No Risk Trial: We are confident that the products we recommend will help improve your productivity and help enhance safety. If, after an agreed trial period, you feel otherwise, we will reimburse the difference.
Code
99790
99791
99792
99793
99794
99795
A40 Coveralls Product Details - PPE Classification: CAT111 Type: 5 & 6
Description
A40 Coverall
A40 Coverall
A40 Coverall
A40 Coverall
A40 Coverall
A40 Coverall
Size
S
M
L
XL
XXL
XXXL
Colour
White
White
White
White
White
White
Case Contents
25 Coveralls
25 Coveralls
25 Coveralls
25 Coveralls
25 Coveralls
25 Coveralls
A 40
SMALL Fits chest 96-104cm height up to 170cm
MEDIUM Fits chest 104-112cm height up to 176cm
LARGE Fits chest 112-120cmheight up to 182cm
XLARGE Fits chest 120-128cm height up to 188cm
XXLARGE Fits chest 128-136cm height up to 194cm
XXXLARGE Fits chest 136-144cm height up to 200cm
KLEENGUARD* Coveralls Size Guide
Product Order Details
Chemical
Acetic Acid
Acetone
Acetophenone
Ethanol
Formaldehyde
Formic Acid
Heptane
Hydrochloric Acid
Nitric Acid
Sodium Hydroxide
Sulphuric Acid
Concentration
40%
100%
100%
95%
37%
40%
100%
37%
40%
48%
35%
Penetration
3
3
3
3
3
3
3
3
3
3
3
Chemical Permeation Data(3)
Repellency
3
1
3
2
3
3
0
2
3
2
3
CAS No
64-19-7
67-64-1
98-86-2
64-17-5
50-00-0
64-18-6
142-82-5
7647-01-0
7697-37-2
1310-73-2
7664-93-9
In ISO 6530:2005 a measured quantity of the test chemical is applied to the fabric in the form of a fine stream or jet. The amount of chemical which penetrates and is repelled by the fabric is measured. The 3 classifications for penetration and repellency are defined in EN 14325:2004(3) Additional chemicals tested according to ISO 6530:2005
High performance apparel fabric
Outer layer – film coating resists splash and spray from many liquids and dry particulates. Inner layer – cloth-like, yet tough and abrasion-resistant spunbond polypropylene.
Garment Details: Zipper front
Elasticated waist, hood, wrists & ankles
Sewn & taped seams
Kimberly-Clark Australia Pty. Limited ABN 65 000 032 333 52 Alfred Street Milsons Point NSW 2061 * Trademarks of Kimberly-Clark Worldwide, Inc. © 2013 KCWW. KCP330
Test Method
EN 530 Mth 2
ISO 7854 Mth B
ISO 9073-4
EN 863
EN ISO 13934-1
EN 368 (10% NaOH/30%H2SO
4)
EN 368 (10% NaOH/30%H2SO
4)
EN 13274-4 Mth 3
EN ISO 13935-2
EN1149-1
Penetration
< 10%
< 5%
< 1%
Repellency
> 80%
> 90%
>95%
Class
1
2
3
EN ISO 13982-1:2004Type 5-B
Particle protection
EN 1073-2:2002Radioactive dust
contamination protection
A20
A70
A80
A45
A40
A50
A10
A 71
CE0120 EN 1149-1:1995Antistatic
EN 13034:2005Type 6
Limited splash protection
Penetration test data available on Product Technical Bulletin - available from [email protected]