knauf screw anchors...knauf screw anchors 1 designed for use with knauf’s steel wall framing and...
TRANSCRIPT
PRODUCT DATA SHEET
AUGUST 2020
Knauf Screw Anchors
1
Designed for use with Knauf’s steel wall framing and ceiling frame systems, the Knauf screw anchor range has been purpose made to provide a complete framing solution from one manufacturer with full certification.
The Knauf screw anchor range is an integral part of achieving the full Knauf system performance, as such it is essential for the Knauf System Warranty and engineering certification.
Product Information
Anchor Dimensions
ANCHOR KSA6X45 KSA6X60 KSA8X65
Nominal embedment depth hnom (mm) 40 55 60
Maximum fixture thickness tfix (mm) 5 5 5
Threaded outer diameter dt (mm) 7.85 7.85 10.3
Core diameter dk (mm) 5.85 5.85 7.85
Shaft diameter ds (mm) 6.15 6.15 8.45
Shaft length (mm) 45 60 65
Benefits Part of the complete certified Knauf
wall and ceiling system
Compatible with Knauf metal products
Minimal edge distance and anchor spacing required
ETA certified and complies with AS 5216:2018 Design of post-installed and cast-in fastenings in concrete.
Application
The Knauf screw anchor range is compatible with the following substrates:
• Cracked and uncracked concrete for wall, floor and overhead applications.
• Autoclaved aerated concrete for walls.
• Solid brick for walls.
Suitable for use in the following loads:
• Static loads
• Quasi-static load
• Seismic C1 load certified
• Fire resistance loads
For internal use and behind external cladding. Not for use outside the building envelope.
PRODUCT DATA SHEET
AUGUST 2020
Knauf Screw Anchors
2
K S AK S AK S A
8
X 6 5
8
X 6 5
8
X 6 5
K S AK S AK S A
6
X 6 0
6
X 6 0
6
X 6 0
K S AK S AK S A
6
X 4 5
6
X 4 5
6
X 4 5
KSA6X45mm
KSA6X60mm
KSA8X65mm
Knauf Anchors
Product Information
Properties
ANCHORKSA6X45
KSA8X65KSA6X60
Head type Hex-head SW13 Hex-head SW13
Corrosion protection 8 µm zinc coating 8 µm zinc coating
Nominal tensile strength fuk (N/mm2) 930 810
Yield strength fyk (N/mm2) 745 695
Stressed cross-section As (mm2) 26.9 48.4
Concrete thickness and Anchor placement
ANCHOR KSA6X45 KSA6X60 KSA8X65
Minimum concrete thickness (mm) 80 100 100
Minimum spacing Smin (mm) 35 35 50
Minimum edge distance Cmin (mm) 35 35 40
Knowhow to help bring your project to life
The Knauf Knowhow suite of tools and technical support services is developed through dialogue and an understanding of your challenges. It’s been designed to give you full project support and enable us to be part of the solution.
Discover Knowhow online here.
Knauf Screw Anchor 6x45mm
Knauf Screw Anchor 6x60mm
Knauf Screw Anchor 8x65mm
PRODUCT DATA SHEET
AUGUST 2020
Knauf Screw Anchors
3
Static and Quasi-static Performance in Concrete
Static / Quasi-static Loads
Design resistance in cracked concrete
Pull-out (kN) Shear (kN)
KSA6X45 KSA6X60 KSA8X65 KSA6X45 KSA6X60 KSA8X65
Nominal embedment depth hnom (mm) 40 55 60 40 55 60
Concrete Grade
(MPa)
20 1.39 3.33 6.00 3.77 8.33 12.67
25 1.54 3.70 6.66 4.22 8.33 12.67
32 1.76 4.22 7.59 4.77 8.33 12.67
40 1.96 4.70 8.46 5.33 8.33 12.67
50 2.19 5.27 9.48 5.96 8.33 12.67
1. No edge distance and spacing influence, or reinforcement affects. 2. Interaction of both Pull-out and Shear to be considered as per AS5216-2018 Equation 8.2.1(1) and 8.2.1(2)
Seismic C1 Performance in Concrete
Seismic C1 Loads
Design resistance in cracked concrete
Pull-out (kN) Shear (kN)
KSA6X45 KSA6X60 KSA8X65 KSA6X45 KSA6X60 KSA8X65
Nominal embedment depth hnom (mm) 40 55 60 40 55 60
Concrete Grade
(MPa)
20 1.39 2.22 6.00 1.60 1.67 3.97
≥ 25 1.39 2.22 6.00 1.67 1.67 3.97
1. No edge distance and spacing influence, or reinforcement affects. 2. Interaction of both Pull-out and Shear to be considered as per AS5216-2018 Equation 8.2.1(1) and 8.2.1(2)
3. αgap = 0.5
Warranty Knauf’s products are guaranteed by a 10 Year Warranty.
When products are installed as part of a complete system in accordance to our recommendations, the Knauf Warranty may cover the whole system.
For details visit www.knauf.solutions
Technical Advice
AU 1300 724 505
Knauf provides a free design service for metal products backed up by the Knauf Warranty.
The detailed engineering designs for walls, ceilings and window or door openings take into consideration specific project needs and meet the building code requirements.
PRODUCT DATA SHEET
AUGUST 2020
Knauf Screw Anchors
4
KSA6X45 and KSA6X60
1 2
4
3
5
2
3
hnom
h1
tfix
Hammer drill setting
Check fitting
d0
Ø 6mm
df
Ø ≤ 9mm
hnom h1
tfix
General ApplicationsSection
Overhead ApplicationsSection
KSA6X45
KSA6X60
SW13T30
h1
40mm50mm
5mm maximum
hnom
tfix
h1
55mm65mm
5mm maximum
hnom
tfix
hnom
40mm
SID 2-A ½”
Hilti Impact Driver / Wrench
55mm
20 Nm
25 Nm
KSA6X45
KSA6X60
h1
40mm48mm
5mm maximum
hnom
tfix
h1
55mm63mm
5mm maximum
hnom
tfix
h1
SIW 6AT-A22 ½” SIW 22T-A ½”
Installationtorque
1x
INSTALLATION
PRODUCT DATA SHEET
AUGUST 2020
Knauf Screw Anchors
5
KSA8X65
1 2
4
3
5
hnom
h1
h1
tfix
hnom h1
tfix
Hammer drill setting
Check fitting
d0
Ø 8mm
df
Ø ≤ 12mm
General ApplicationsSection
Overhead ApplicationsSection
KSA8X65
SW13
h1
60mm70mm
5mm maximum
hnom
tfix
hnom
60mm
SIW 22-A ½” SIW 6AT-A22 ½”
Hilti Impact Driver / Wrench
SIW 22T-A ½” SIW 22T-A ¾” SIW 9-A22 ¾”
KSA8X65h1
60mm70mm
5mm maximum
hnom
tfix
1x
INSTALLATION