kohler courage model specifications - gardnerinc.comcourage ® engine architecture designed...

4
For more information, contact your KOHLER source of supply Or call toll-free in the U.S. and Canada 1-800-544-2444. Kohler Co., Kohler, Wisconsin 53044 Tel 920-457-4441 Fax 920-459-1570 KohlerEngines.com © 2008 by Kohler Co. All rights reserved. Printed in U.S.A. E-2143 10/08 Relentless Power. Legendary Performance. KOHLER® Courage® Model Specifications * Horsepower ratings exceed Society of Automotive Engineers Small Engine Test Code J1940. Actual engine horsepower is lower and affected by, but not limited to, accessories (air cleaner, exhaust, charging, cooling, fuel pump, etc.), application, engine speed and ambient operating conditions (temperature, humidity and altitude). For more information, contact Kohler Co. Engine Engineering. Kohler reserves the right to change product specifications, designs and equipment without notice and without incurring obligation. ** Measurements based off a base engine without electric start. Engine Type Four-cycle, single cylinder, slant cylinder, overhead valve, air-cooled, gasoline, horizontal-shaft, aluminum head and crankcase with cast iron cylinder liner. Model: SH255 SH265 SH380 SH390 SH410 SH430 *Gross Power @ 3800 rpm Maximum hp (kW) 5.5 (4.1) 6.5 (4.9) 8 (6) 9 (6.8) 11 (8.3) 13 (9.8) *Net Power @ 3800 rpm Maximum hp (kW) 4.8 (3.6) 5.5 (4.1) 7.1 (5.3) 8 (6) 9.5 (7.1) 11 (8.2) Displacement cu in (cc) 12 (196) 16.5 (270) 23.7 (389) Bore in (mm) 2.7 (68) 3 (77) 3.5 (88) Stroke in (mm) (2.1) 54 2.3 (58) 2.5 (64) Peak Torque @ Maximum lbs ft (Nm) 7.6 (10.3) @ 2500 9.1 (12.4) @ 2500 11.3 (15.3) @ 2500 13.1 (17.7) @ 2500 16.3 (22.1) @ 2500 18.5 (25.1) @ 2500 Compression Ratio 8.5:1 8.2:1 8:1 Dry Weight (Recoil Start) lbs (kg) 35.3 (16) 55 (25) 68.3 (31) Oil Capacity U.S. qt (L) .63 (.6) 1.2 (1.1) 1.2 (1.1) Fuel Capacity U.S. qt (L) 3.8 (3.6) 6.3 (6) 6.9 (6.5) Lubrication Splash **Dimensions L x W x H in (mm) 12.3 x 14.3 x 13.5 (313 x 363 x 342) 14 x 17.7 x 17.1 (355 x 450 x 435) 15 x 18.8 x 17.3 (380 x 478 x 439) • OHV slant cylinder • Cast iron cylinder liner • Large capacity metal fuel tank • Plastic fuel cap • In-neck fuel debris screen • Water trap in carburetor • Basin shaped combustion chamber • Electronic ignition • Standard muffler with guard • EPA emission certified • Meets EEC and Canadian RFI standards • Easy access throttle, choke and fuel shut off • Increased displacement • Balance shaft (11 and 13 hp) • Automatic compression release • Mechanical governor • Sound-deadening alloy crankcase • Dual ball bearings • Steel forged and hardened crankshaft • Carburetor bowl drain • Dual oil fills and drains • Dipstick on starter side • Automatic low oil engine shutdown system • Racing-type dual-element air cleaner • High inertial flywheel • Silenced air intake • Indexable easy-pull recoil starter 2:1 reduction 2:1 reduction with clutch 12-volt starter • Exhaust deflector Spark arrestor 3- and 10-amp Crankshaft/PTO variations (Keyed, Tapered, Threaded) • Low-profile air cleaner (Generator) • Low-profile muffler (Generator) Remote throttle Standard Features Popular Factory Options

Upload: others

Post on 15-Jul-2020

5 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: KOHLER Courage Model Specifications - Gardnerinc.comCOURAGE ® ENGINE ARCHITECTURE Designed specifically for consumer applications, the Courage ® family of engines feature, steel-forged

For more information, contact your KOHLER source of supplyOr call toll-free in the U.S. and Canada 1-800-544-2444.

Kohler Co., Kohler, Wisconsin 53044 Tel 920-457-4441 Fax 920-459-1570

KohlerEngines.com © 2008 by Kohler Co. All rights reserved. Printed in U.S.A. E-2143 10/08

Relentless Power.Legendary Performance.

Relentless Power. Legendary Performance.

KOHLER® Courage® Model Specifications

* Horsepower ratings exceed Society of Automotive Engineers Small Engine Test Code J1940. Actual engine horsepower is lower and affected by, but not limited to, accessories (air cleaner, exhaust, charging, cooling, fuel pump, etc.), application, engine speed and ambient operating conditions (temperature, humidity and altitude). For more information, contact Kohler Co. Engine Engineering. Kohler reserves the right to change product specifications, designs and equipment without notice and without incurring obligation.

** Measurements based off a base engine without electric start.

Engine TypeFour-cycle, single cylinder, slant cylinder, overhead valve, air-cooled, gasoline, horizontal-shaft, aluminum head and crankcase with cast iron cylinder liner.

Model: SH255 SH265 SH380 SH390 SH410 SH430

*Gross Power @ 3800 rpm Maximum hp (kW) 5.5 (4.1) 6.5 (4.9) 8 (6) 9 (6.8) 11 (8.3) 13 (9.8)

*Net Power @ 3800 rpm Maximum hp (kW) 4.8 (3.6) 5.5 (4.1) 7.1 (5.3) 8 (6) 9.5 (7.1) 11 (8.2)

Displacement cu in (cc) 12 (196) 16.5 (270) 23.7 (389)

Bore in (mm) 2.7 (68) 3 (77) 3.5 (88)

Stroke in (mm) (2.1) 54 2.3 (58) 2.5 (64)

Peak Torque @ Maximum lbs ft (Nm)7.6 (10.3) @ 2500

9.1 (12.4)@ 2500

11.3 (15.3)@ 2500

13.1 (17.7)@ 2500

16.3 (22.1)@ 2500

18.5 (25.1)@ 2500

Compression Ratio 8.5:1 8.2:1 8:1

Dry Weight (Recoil Start) lbs (kg) 35.3 (16) 55 (25) 68.3 (31)

Oil Capacity U.S. qt (L) .63 (.6) 1.2 (1.1) 1.2 (1.1)

Fuel Capacity U.S. qt (L) 3.8 (3.6) 6.3 (6) 6.9 (6.5)

Lubrication Splash

**Dimensions L x W x H in (mm) 12.3 x 14.3 x 13.5 (313 x 363 x 342)

14 x 17.7 x 17.1 (355 x 450 x 435)

15 x 18.8 x 17.3 (380 x 478 x 439)

• OHV slant cylinder• Cast iron cylinder liner • Large capacity metal fuel tank• Plastic fuel cap• In-neck fuel debris screen• Water trap in carburetor• Basin shaped combustion chamber • Electronic ignition • Standard muffler with guard

• EPA emission certified• Meets EEC and Canadian RFI standards • Easy access throttle, choke and fuel shut off• Increased displacement• Balance shaft (11 and 13 hp) • Automatic compression release• Mechanical governor• Sound-deadening alloy crankcase• Dual ball bearings• Steel forged and hardened crankshaft

• Carburetor bowl drain• Dual oil fills and drains• Dipstick on starter side• Automatic low oil engine shutdown system • Racing-type dual-element air cleaner • High inertial flywheel• Silenced air intake• Indexable easy-pull recoil starter

• 2:1 reduction• 2:1 reduction with clutch• 12-volt starter• Exhaust deflector

• Spark arrestor• 3- and 10-amp • Crankshaft/PTO variations

(Keyed, Tapered, Threaded)

• Low-profile air cleaner (Generator)• Low-profile muffler (Generator)• Remote throttle

Standard Features

Popular Factory Options

KOHLER® Courage® Model Specifications

Page 2: KOHLER Courage Model Specifications - Gardnerinc.comCOURAGE ® ENGINE ARCHITECTURE Designed specifically for consumer applications, the Courage ® family of engines feature, steel-forged

5 . 5 - 6 . 5 h p e n g i n e s ( S H 2 5 5 a n d S H 2 6 5 )

VALV

E C

OV

ER

VIE

WS

IDE

VIE

W5 . 5 - 6 . 5 h p e n g i n e s ( S H 2 5 5 a n d S H 2 6 5 )

1 1 - 1 3 h p e n g i n e s ( S H 4 1 0 a n d S H 4 3 0 )

PERFORMANCEENGINEERING

PERFORMANCEENGINEERING

Every part, every component, every system on a KOHLER® engine

is guided by our exclusive Performance Engineering standards —

standards that drive us to operate on the leading edge of innovation,

to push the boundaries of cleaner, more efficient engines, and to

manufacture the highest performing, most reliable engines on the

market. That’s Performance Engineering.

5 . 5 - 6 . 5 h p e n g i n e s ( S H 2 5 5 a n d S H 2 6 5 )

TOP

VIE

W

1 1 - 1 3 h p e n g i n e s ( S H 4 1 0 a n d S H 4 3 0 )

KO

HL

ER

® CO

UR

AG

E® E

NG

INE

AR

CH

ITE

CT

UR

E

BO

TTO

M V

IEW

PTO

VIE

W

5 . 5 - 6 . 5 h p e n g i n e s ( S H 2 5 5 a n d S H 2 6 5 )

Page 3: KOHLER Courage Model Specifications - Gardnerinc.comCOURAGE ® ENGINE ARCHITECTURE Designed specifically for consumer applications, the Courage ® family of engines feature, steel-forged

KO

HL

ER

® CO

UR

AG

E® E

NG

INE

AR

CH

ITE

CT

UR

E

Designed specifically for consumer applications, the Courage® family of engines feature,

steel-forged crankshafts and advanced ignition systems, and provide greater displacement –

across the board – for greater power. You’ll also get dual ball bearings for easy starts,

reduced noise, vibration, emissions and better fuel efficiency.

Professional Grade Features for the Consumer.

Overhead valve for better fuel efficiency and cleaner emissions, cast iron cylinder bore and steel forged crankshaft provide added protection under load, extending the engine life.

Superior Startability.

The large indexable recoil starter and dual ball bearings make starting the engine nearly effortless.

Easy to Use and Maintain.

No matter the application, the dual oil fills and drains provide the user accessibility to fill and drain the oil from either side of the engine. Along with the large metal fuel tank, easy access controls and no tools required air cleaner, this engine top’s the easy-to-use category.

Designed for Dependability.

Low oil alert system is standard on this engine letting you know when oil is needed along, with the inline fuel filter to remove dirt and debris before fuel enters the engine. These features in turn add to the life of the engine.

Emissions: Certified for both EPA and California emissions

standards. Precise air-to-fuel ratio for cleaner

combustion with optimum horsepower and torque.

Service: Backed by more than

13,000 dealers and

distributors worldwide.

Warranty: Two-year limited warranty

covering all consumer

applications.

8 - 9 h p e n g i n e s ( S H 3 8 0 a n d S H 3 9 0 )

VALV

E C

OV

ER

VIE

W8 - 9 h p e n g i n e s

( S H 3 8 0 a n d S H 3 9 0 )

SID

E V

IEW

KO

HL

ER

® CO

UR

AG

E® E

NG

INE

AR

CH

ITE

CT

UR

E

PTO

VIE

W

8 - 9 h p e n g i n e s ( S H 3 8 0 a n d S H 3 9 0 )

TOP

VIE

W

8 - 9 h p e n g i n e s ( S H 3 8 0 a n d S H 3 9 0 )

BO

TTO

M V

IEW

Page 4: KOHLER Courage Model Specifications - Gardnerinc.comCOURAGE ® ENGINE ARCHITECTURE Designed specifically for consumer applications, the Courage ® family of engines feature, steel-forged

1 1 - 1 3 h p e n g i n e s ( S H 4 1 0 a n d S H 4 3 0 )

KO

HL

ER

® CO

UR

AG

E® E

NG

INE

AR

CH

ITE

CT

UR

E

KO

HL

ER

® CO

UR

AG

E® E

NG

INE

AR

CH

ITE

CT

UR

E

PTO

VIE

WTO

P V

IEW

BO

TTO

M V

IEW

1 1 - 1 3 h p e n g i n e s ( S H 4 1 0 a n d S H 4 3 0 )

SCHEMATIC 3b

SID

E V

IEW

VALV

E C

OV

ER

VIE

W