kolkata souvenir1314
TRANSCRIPT
SOUVENIR
NATIONAL LEVEL
VENDOR DEVELOPMENT PROGRAMME
FROM 27.12.2013 TO 29.12.2013
AT MILAN MELA, KOLKATA
ORGANISED BY
MSME -‐DEVELOPMENT INSTITUTE, MINISTRY OF MSME, GOVT. OF INDIA,
KOLKATA
A REPORT ON NATIONAL LEVEL VENDOR DEVELOPMENT PROGRAMME ORGANISED BY MICRO SMALL AND MEDIUM ENTERPRISE-‐DEVELOPMENT INSTITUTE, KOLKATA AT MILAN MELA, KOLKATA
FROM 27.12.2013 TO 29.12.2013
A National Level Vendor Development Programme -cum - Buyers Sellers Meet has been
organized by MSME-DI, Kolkata at Milan Mela, Kolkata in association with Bengal National
Chamber of Commerce & Industries , Kolkata from 27.12.13 to 29.12.13.
The time and duration of the programme was 11.00 a.m. to 8.00 p.m. each day. The
programme was inaugurated by Shri Partha Chatterjee, Hon’ble Minister-in-charge of Commerce
& Industry ,Govt. of West Bengal. Sri Madan Mitra, Hon’ble Minister of Transport, Govt. of West
Bengal was present as Guest of Honour. Mr. S.K.Basu, Director, MSME-DI, Kolkata. Mr.
Dibyendu Basu, President, Bengal National Chamber of Commerce & Industry, Mr. Sandip Sen,
Chairman of 26th IITF, Kolkata G.M. DIC, Kolkata, and other dignitaries from many PSU, Large
Scale Industries & SSI units were present in the inaugural function held on 27.12.2013.
Director, MSME-DI, Kolkata gave his welcome address. He welcomed to the dignitaries ,
participants and press media in this programme. In his address, he expressed his satisfaction
that this is the first time that MSME-DI, Kolkata is organizing this NLVDP programme at Milan
Mela, Kolkata, within the IITF Mela Complex. He opined that it was more convenient to
participate by PSU, Large Scale & small scale Industries from this region. He explained that
keeping in view their convenient MSME-DI, Kolkata has decided to organize this programme at
26th IITF, Milan Mela. He hoped that this programme would fetch the benefit to both PSU, Large
Scale and surely to SSI sectors who have participated in this programme. He requested to PSU
and Large Scale Industries to extend more cooperation to the SSI units as their vendor and
highlighted the public procurement policy, its effect on implementation etc. He narrated the
MSME Policy & to implement these policy, scheme to implement these policy, scheme to
upgrade the quality of production and standardization the working system of the unit. He
expressed his happiness for the cooperation extended by Bengal National Chamber of
Commerce & Industry, Kolkata.
Mr. Sandip Sen, President of 26th IITF viewed that all the associations should have a
good coordination with MSME-DI to enjoy the benefit of Govt. of India provided for
development of MSME sector. He assured that their cooperation for organizing this type of
development and promotional work.
Sri Madan Mitra, Hon’ble Minister of Transport, Govt. of West Bengal, expressed that he
hoped that with the effort of MSME-DI, Kolkata a good development of MSME Sector will be
achieved. He advised to all authorities to have good coordination and interaction to work jointly
for achieving this dream and assured all his cooperation and support on behalf of Govt. of West
Bengal. He desired that this type of promotional programme should be conducted in more nos.
by MSME-DI in this region. He requested to PSU , Large Scale Industries to come forward to
participate to work for development for SSI sector which give more employment opportunity
and which will also help to PSU to develop their ancillarisation policy of PSU.
Mr. K. D. Bhattacharya briefed the objective of conducting this programme .He opined
that this programme would be extremely beneficial to both Large Scale & Small Scale
Industries. Large Scale Industries can select the most efficient Vendors in this programme &
Small Scale Units can utilize this common platform to register them to the Large Scale
Units/PSUs & can gather technical knowledge on various products to develop products as per
the requirements of the PSU/Large Scale Sectors. He told that MSME-DI Kolkata is working to
develop a relationship between MSE & PSU which will perform as a bridge between this two
sector to come across to meet their mutual benefit, Sri D.P. Nag, Secretary of Bengal National
Chamber of Commerce & Industries offered a vote of thanks to the dignitaries and
participants. The Chief Guest enlightened lamp of the programme and inaugurated the
exhibition.
The exhibition was opened from 11.00 a.m. to 8.00 p.m. The Senior Officers of
Purchase/Materials Management Department of Garden Reach Ship Builders, Kolkata, Eastern
Railway, Balmer & Loree, Chittaranjan Locomotive Works, Kolkata, Ishapore Rifle Factory, Metal
& Steel Factory, Ichapore, Kashipore Gun & Shell Factory, Kolkata – 2, Ordnance Factory Board,
Dum Dum ,NSIC, Hindustan Aeronautics Pvt. Ltd.(HAL), DGQA, Kolkata have visited the
exhibition, delivered talk on the product/service they regularly procure & for which SSI sector
have scope to supply to their organizations. 150 stalls were constructed to exhibit their
products. The items displayed by these SSI units are Electrical Transformer (both
manufacturing, & Service) Refractories bricks , Mortars, Caste , Head lights, solar lights and
equipments, motors, pump, Heavy duty exhaust Fan , Computer Maintenance service,
development of programming steel standard activity . Fly ash interlocked building bricks,
compacted fly ash pavement block, tiles. Food items cutting tools precision Brass made spare
parts and equipments as control equipments, ferro-manganese, ferro silicate, ferro-crome,
woven HDPE packing bags, slay cement, safety leather shoe, hand glove, hospital bed &
equipment, digital weighing m/c. wire & wire net, Mining equipments, air ventilation, Hosiery
product, furniture, handicapped product, the product of cluster such as Fan, Artificial Ornament,
Roofing Tiles, Silver Filigree etc.
The Chief Guest & dignitaries visited the exhibition and took keen interest to interact
with the SSI units. They appreciate the developmental work done by MSME-DI, Kolkata for the
Cluster Development under MSE-CDP Scheme.
The officers of GRSE, CLW, Eastern Railway, Balmer and Lawree Co. Ltd., Kolkata, Rifle
Factory, Ishapore, HAL, Metal & Steel Factory, Cossipore Gun & Shell Factory, Ordnance Factory
Board, Dum Dum, delivered lecture on the various items / services being procured by their
organizations and identified the items which can be supplied by SSI units. The procedure for
procurement of products and services were also briefed by the Guest speakers from PSU/Large
Scale Units.
Sri K.D. Bhattacharya, Dy. Director projected the NMCP scheme in details, Shri R.
Bhattacharya, AD discussed on MSE-CDP scheme , registration procedure and reimbursement
for procuring ISO 9000 certification. Sri K.D. Bhattacharya explained the Public Procurement
Policy in brief during this 3 days programme.
A valedictory function was organized on 29.12.13 from 4.30 p.m. to 6 p.m. The
representative from PSU, Large Scale Unit , proprietor of small scale unit , prospective
entrepreneurs , President & Secretary of Bengal National Chamber of Commerce & Industry,
Kolkata Officers of MSME-DI were present in the valedictory function.
In the feedback evaluation system the participating SSI units have opined that this
programme will help them to register to the PSU/LSU as vendor and to bag order from this
PSUs. The small & medium scale unitS also have inter action between them and some of them
made a contact for supplying product service from one another. On evaluation of the feed back
it is estimated that participating SSI unit will be able to get order for supplying product /service
to the tune of Rs. 40 crores in the year 2014-15 which may increase gradually in the coming
year.
In the Valedictory Session, Mr. K.D. Bhattacharya, Dy. Director, MSME-DI, Kolkata has
expressed his gratefulness to all who have participated & who have extended their supports to
organize this programme very successfully.
Shri Partha Chatterjee, Hon’ble Minister-in-charge of Commerce & Industry ,Govt. of West Benga, Sri Madan Mitra, Hon’ble Minister of Transport, Govt. of West Bengal , Shri S,K,Basu, Director , MSME-DI, Kolkata and other dignitaries during the inaugural session
Mr. Sandip Sen, President of 26th Industrial India Trade Fair, Kolkata formally opening the Exhibition Pavilion of the NLVDP at Kolkata
List of CPSUs/Govt. Deptt./Large Scale Organisations participated in the State and National Level
Vendor Development Programmes conducted by MSME-DI,Kolkata, during 2013-14
Sl.No. CPSUs/Govt. Deptt./Large Scale Organisations participated in the SLVDP and
NLVDP 1. Steel Authority of India, Durgapur
2. Eastern Coal Field, Dist. - Burdwan
3. Durgapur Projects Limited, Durgapur
4. Essar Steel, Durgapur
5. Dishergarh Power Supply Co. Ltd.
6. Garden Reach Shipbuilders & Engineers Ltd., (GRSE,)
43/46 , Garden Reach Road, Kolkata – 700 024 7. Eastern Railway, Fairlie Place, Kolkata – 700 001
9. Ichapur Rifle Factory Ichapur, Dist. – 24 Parganas (North)
10. Chittaranjan Locomotive Works, Chittaranjan, Dist. – Burdwan
11. Ordnance Factory, Jessore Road, Dum Dum, Kolkata - 700 028
12. Balmer Lawrie & Co. Ltd. 2 1 Netaji Subhas Bose Road, Kolkata-700001.
13. Hindusthan Aeronautic Limited, Barrackpore, Dist. – 24 Parganas (North)
14. Gun & Shell Factory, Cossipore, Kolkata – 700 002
15 Damodar Valley Corpn., Durgapur,
16. Chittaranjan Locomotive Works, Kolkata
17. DGQA
18. Durgapur Steel Plant
19. Canara Bank
20. State Bank of India
21. Border Security Force
22. North Frontier Railway
23. DVC-NTPC Thermal Power Station, Waria, Durgapur
24. Andrew Yule & Company Limited, Kolkata
25. Metro Railway, Metro Bhavan, 33/1 Chowringhee Road, Kolkata - 700 071
26. Indian Oil Corporation Limited, Mourigram Terminal, Howrah
27. NTPC, Farakka
28. Engineer’s India Ltd., Kolkata
29 Coal India Ltd.,
30. CMERI , Durgapur
31. IISCO, Burnpur
32. Indian Oil Corpn. Haldia.
Names of the CPSUs liaised with for implementation of the Procurement Policy by MSME-DI, Kolkata: -
Sl. No. Name & Addresses of the PSUs
1. General Manager Chittaranjan Locomotive Works Metro Railway Car Shed, D P S Road, Tollygunge, Kolkata – 700033
2. Head, Materials Manager Function Chittoranjan Locomotive Works P.O.- Chittaranjan, Dist. – Burdwan Pin – 713331
3. Chief Material Manager Eastern Railway Regional Office 17, Near Fairly Place, Netaji Subhas Road, Kolkata - 700001
4. General Manager Rifle Factory Ishapore Nawabganj, Ichapur, North 24 Parganas, Pin- 743144
5. Secretary Ordnance Factory Board Ayudh Bhavan, Sahid 10 A S.K.Bose Road, Kolkata - GPO, Kolkata - – 700001
6. Dy. Manager Bharatiya Reserve Bank Note Mudran (P) Ltd. P.O.- R.B.N.M.I. Salboni Paschim Mediinipur , Pin – 721132
7. Dy. General Manager (Engg-Elect) Airport Authority of India RHQ-E/R, NSCBI Airport Kolkata - – 700 052
8. General Manager (Materials Management) Indian Oil Corporation Ltd Indian Oil Bhavan, 2nd Floor Central Wing 2, Gariahat Road (South), Dhakuria, Kolkata – 700068
9. General Manager (Materials Management) Hindustan Petroleum Corporation Ltd,Regional Office P 4, Paharpur, Oil Installation Road, Brace Bridge, Kolkata - 700088
10. General Manager (Materials Management) Damodar Valley Corporation DVC Towers, VIP Road, Kankurgachi, Kolkata – 700054
11. Dy.Chief Engineer (Technical) Mejia Thermal Power Station DVC,Mejhia, Durgapur
12. Dy. General Manager (Stores & Purhcase) The Durgapur Projects Limited
Durgapur-713 201, District- Burdwan West Bengal
13. General Manager (Materials Management) The Durgapur Projects Limited 1593, Rajdanga Main Road, Kolkata -- 700 107
14. General Manager (Materials Management) Durgapur Steel Plant Durgapur, Pin – 713203
15. General Manager (Materials Management) Alloy Steel Plant S S Sarani, Durgapur Thermal Power Station, Durgapur – 713208
16. General Manager (Materials Management) Eastern Coalfields Ltd. Sanctoria, P.O.Disergarh, Burdwan (W.B.) Pin – 713333
17. General Manager (CSR & PR) IISCO Steel Plant Burnpur - 713 325 (W.B.)
18. Chairman & Mg. Director Andrew Yule & Co. Ltd., Yule House, 8, Dr. Rajendra Prasad Sarani, Kolkata - 700 001.
19. Managing Director Balmer Lawrie & Co. Ltd., 21, Netaji Subhash Road, Kolkata - 700 001.
20. Managing Director Bengal Chemicals & Pharm. Limited, 6, Ganesh Chunder Avenue, Kolkata - 700 013.
21. Chairman & Mg. Director Bharat Bhari Udyog Nigam Ltd., 26, Raja Santosh Road, Alipore, Kolkata - 700 027.
22. Managing Director Braithwaite & Company Limited 5, Hide Road, Kolkata - 700 043.
23. Managing Director Braithwaite Burn & Jessop Construction Company Ltd., 27, R.N. Mukherjee Road, Kolkata - 700 001.
24. Chairman & Mg. Director Bridge & Roof Co. Ltd., Kankaria Centre, 5th Floor, 2/1, Russal Street, Kolkata - 700 071
25. Managing Director
Burn Standard Co. Ltd., 22-B, Raja Santosh Road, Kolkata - 700 027.
26. Chairman Coal India Limited, 10, Netaji Subhash Road, Kolkata - 700 001.
27. Chairman & Mg. Director Garden Reach Shipbuilders & Engineers Limited, 43/46, Garden Reach Road, Kolkata - 700 024.
28. Chairman & Mg. Director Hindustan Copper Limited, Tamra Bhavan, 1, Ashutosh Chowdhury Avenue, Kolkata - 700 019.
29. Chairman & Mg. Director Hindustan Cables Limited, 9, Elgin Road, Kolkata - 700 020.
30. Chairman & Mg. Director Hindustan Paper Corpn. Limited, 75-C, Park Street, Kolkata - 700 016.
31. Chairman-cum –Managing Director Hindustan Steelworks Construction Limited 5/1, Commissariat Road, Hastings, Kolkata - 700 022.
32. Chairman & Mg. Director United Bank of India, 16, Hementa Basu Sarani, Kolkata - 700 001.
33. Chairman & Mg. Director Tyre Corporation of India Limited, “Leslie House” 19, Jawaharlal Nehru Marg, Kolkata - 700 087.
34. Additional General Manager (HR) NTPC – Farraka Administrative Building P.O. – Navarun, Dist.- Murshidabad
35. Asstt. General Manager (P) Bharat Sanchar Nigam Ltd. 3A, Chowringhee Place, Kolkata – 700013
36. Metro Railway, Metro Bhavan, 33/1 Chowringhee Road, Kolkata - 700 071
LIST OF PARTICIPANTS FOR NATIONAL LEVEL VENDOR DEVELOPMENT
PROGRAMME w.e.f 27/12/13 TO 29/12/13 CONDUCTED BY MSME-DI, KOLKATA
AT MILAN MELA, KOLKATA FOR THE F.Y. 2013-14
Sl. Name and address of the Unit Contact No., e- Details Of Products
No. mail i.d etc. manufactured/ Services Rendered.
1 SUBHAS HOSIERY FACTORY 28, B.T.Road, Cossipore, Kolkata-700002
9830166951 [email protected]
Hosiery Undergarments
2 OASYS INFOCOM (P) LTD. B/12 & 309 Commercial Point, 79,Lenin Sarani Kolkata – 700 013
03322646642/43 E-mail - contact @ oasys info.com
Computer, LED display, Electronic gadgets, touch screen, information Kiosk
3 BRICK WORKS INDIA 13,Rabindra Sarani, (Mohankunj) Liluah ,Howrah-711204
033 2645 5320/2777
Fly Ash Bricks & Pavers Blocks
4. EXCEL 5B,Hem Kar Lane, Kolkata – 700 005
9433135117 E-mail – [email protected]
Leather goods, wallets, Bags
5. ELECTRO SERVICE (I) 620, D.H.Road, Behala Indl. Estate, BLPQ -2, Kolkata - 34
033-3291-4054 E-mail - [email protected] www.esielectro.com
SCR Battery charger, SMPS Battery Charger, LED Driver , Transformer & Choke, furnace control
6. RIFT INDUSTRIES & ENGG. (P) LTD. 81/1, H,J,Streetm ‘P.O.Uttarpara, Dist. - Hooghly - 712258
033 2664 5719 E-mail - [email protected]
Nuts & Bolts (Iron/Steel) (High Tensile & special type), Adhesive Excl-gum, Fittings for PVC Pipe (conduits) etc
7. GALLANT EQUIPMENT (P) LTD. 104,Karunamoyee Ghat Road, Micheal adhusudan Park, Kolkata – 700 082
9830080783
Powder Coating Plants & Machinery
8. SHREE GOPAL INTERNATIONAL 19/2/1,Babutala Road, Dum Dum, Kolkata – 700074
98301 22692 033 2252 2550 E-mail - [email protected]
Mfg. of folding Cot, Steel Frame Picket Steel Angel , Steel Trunk, Bared wire, Helmets etc.
9. RSSCO RADIATOR INDUSTRIES 82, Bonderbill, T.N.Mukherjee Rd. (Punjabi Para), Dankuni, Hooghly
033-2659 0071
Automobile & Industrial Radiator
10. SHREE DURGA INDUSTRY 4,Tottee Lane, Kolkata - 700016
9830122692 033 2252-2550 sgibalance&rediffmail.com
Digital Electronics, Weighing balance of high accuracy
11. UGE GREEN ENGG. (P) LTD. 316,N.M.I.D.Rpad, Behala Parnasree Pally, Kolkata -700 060
9007077687, E-mail - [email protected]
Sales & Service of EDM & WEDM machine
12. TIARA VENTURES 3,Suren Tagore Road, Kolkata – 700 019
9830037240; E-mail - [email protected]
Water Filter & Water Treatment Plant
13. SMART-TECH 16, Rajkumar Kukherjee Road, Sriguru Plaza, 2nd Floor, Kolkata – 700 035
2510-2577 E-mail - [email protected].
Service Provider IT Communications (Mobile V.A.S.)
14. BARRACKPORE HEAVY ENGG. & STEEL (P) LTD. No.6 B.Bentinc Street,Aloka Home,1st Floor, Kolkata – 700 001
033 2282-0129 / 8238
Mfg. Pressure Cooker(Pelican Brand) Induction Cooker etc.
15. L.MADANLAL (DOMESTIC 9681486718 Wagon. Coach Components
APPLIANCE) PVT LTD. 8,Camac Street,2nd Floor, Space No.5, Kolkata – 700 017
E-mail - lmadanlal @gmail.com
& accessories etc.
16 FAN MANUFACTURING CLUSTER BANSDRONI, KOLKATA 265, H.L.Sarkar Road, Bansdroni, Kolkata – 700 070
9831284272 E-mail - [email protected]
Domestic Ceiling & Table Fan, Exhaust Fan etc.
17. MEGA ENERGY PVT. LTD. 6B,Chandi Bari Street, Kolkata – 700 006
9331057771 E-mail - [email protected]
Mfg. of Refined Lead Ingot, Antimonial Lead, Lead Sheet
18. NATIONAL INDUSTRIAL CORPORATION 33,C.R.Avenue,3rd Floor, Kolkata – 700 012
9432670194 Laboratory Instruments Engineering Pilot Projects
19. MAHADEVA STEEL MILLS PVT.LTD Mr. Piyush Agarwal Fortuna Tower, 23A,N.S.Road,7th Floor, Kolkata – 700 001
9831163420 Mfg:- Equal Angle, Un-equal Angle, Channels, Flat Tees/Squares, Ribbed Bars, 2-Angle etc.
20. SHRISTI BOUTIQUE AND JEWELLERY Kholisani, Bose Para, Chaudhury, Hooghly - 712136
9433107069 Boutique printed Saree, Dress, Artificial Jewellary,
21. Matrix Iron Foundry 108, Dharmatala Road, Ghusuri, Howrah – 711 107
9830496431
C.I.Pan, C.I.Man-Hole Cover & Fans, Hand Pump & other casting products
22. BIJOY BINA MEDIA Prantick, West Santinagar, Anandanagar,
E-mail - [email protected]
Publisher of Industrial Magazine & Web portal, Indian Industrial Guide etc.
Bally, Howrah
23. SHREEJOYI BOUTIQUE Krishna Nagar Road, Opp.Adarsha Bidya Pith, P.O.Noapara, Barasat, Kolkata – 700 125
9831163811 E-mail - [email protected]
Saree block print, batik, Katha Emboidary designed Punjabi, S/k sets etc.
24 KRISHTI CRAFT 106, Green Park, Michael Nagar, Kolkata – 700 133
9088175360 E-mail - [email protected]
Value added Jute Products, Jewellary Handicraft items
25 The Mograhat Silver Filigree Vill. Gopinathpur, P.O.Moukhli, P.S.Mograhat, Pin- 743610, Dist.- 24 Pgs(S)
9879078207
Silver artistic Products, Silver Jewellary, Silver made gift item.
26. Artificial Ornaments & Gift Items Cluster Vill. Shing P.O.Harirajpur P.S.Daspur, Dist. - Paschim Medinipur
95976779870 Artificial Ornaments & Gift Items (Gold Plated)
27 M/s. Priyanka Engineering Works, B.S.Industrial Estate, Bakhrahat Road, P.O.Joka, 24 Pgs(S), Kolkata – 700 104
E-mail - priyankaengineering @yahoo.co.in
Air Filter
28 Maa Kali Enterprise, 36/10A,Sarat Chandra Bose Road, Kolkata – 700 008
9163821460 E-mail - [email protected]
Channel Kerb
29 Pulakesh Nayak Ananta Equipments, Durgapur,
9903057805 E-mail - anantaequipents@g
Mfg. of Solar Lantern with LED, Solar Light
Midnapore-721517 mail.com
30. ARS Technologies, 20/9,D,Iswar Ganguly Street, Kolkata- 700 026
9831071644 9831189645
Automatic Identification & Pricing Solution Providers
31. Max’s Foods Industries, Somnath Chakroborty, 124, Shree Aurobindo Saranio, Kolkata – 700 006
8335044259 E-mail - [email protected]
Processed Fruits & Vegetables Pickles, Jam, Jelly etc.
32. Astik Computers Maa Tara Bhawan Baltikuri, Howrah – 711 113
9874604331 E-mail - [email protected]
Software & Hardware Development Consultancy, Web Page design, Computer Training etc.
33. M/s. SANHIT Sriniketan Road, Bolpur, Dt. Birbhum, W.B , Pin - 731204
9732012651 E-mail - [email protected]
Polymers, Plastic (LDPE/HPE) sheets, caps, plates & allied products.
34. M/S. Girish Ch. Ghosh & G.G.S. 39A, B.T.Road,Kantakal, Kolkata- 700 002
9830081365 E-mail - [email protected]
Mfg. of Scale Weighing machine (Electronics & mechanical) calibration of storage tank, bulk flow metro etc.
35. Abhinav Rubber & Engineers, 2/D, Grant Lane, 4th Floor, R.No. 60-62, Kolkata -700 012
9432366592 9331225766
Rubber Goods, O-ring, Oil Seal, Valve, Rubber Pad, Gasket etc.
36. International Rubber & Plastic Mfg. Vill. - Paramananda Chack P.O.Sontoshpur, Dist. - Howrah – 711 310
9836994047 E-mail - irpmfg @yahoo.co.in
All types industrial Rubber & Plastic Components
37. Enviro Con(P) Ltd., Kolkata-700 026
9602326625
Pollution Control Equipments
38 Bharat Heavy Brake Udyog, Kolkata – 700 029
9830920057 E-mail - [email protected]
Heavy Engg & Railway Products
39. M/s. Ambey Fly Ash Brick, Manoharahal,P.O.Ethora, P.S.Asansol, Asansol, Dist.- Burdwan
9434751636 Fly Ash Bricks, Pavers & Tiles
40. M/s. Flexocon Engineers Private Ltd. Abakash Apartment, Flat 1C, 1st Floor, 14, MIG Housing Estate, Sodepur, Kolkata – 700 001
9831945685 E-mail - [email protected]
Ferrous & Non-ferrous Engg. Components.
41. Paharimata Packaging Industries 109A/1A, B.R.B. Basu Road, 1st floor, Kol-001
033 2242-9501/ 2248-4911 E-mail - [email protected]
Plastic film, packaging materials Geo-membrane etc.
42. Mridula Asbestos Products 9, Clive Row, 1st Floor, Kolkata – 700 001 Factory : Vill. & P.O. Kodalia, 223Ghosal Para Road, (Das Para), Kolkata – 700 146
9433947793
All types steam Hydraulic & Mechanical Packings
43. Ashiwini Kumar Tewary Aanjaneya Industries, 5/B, Dover Road, Kolkata – 700 019
9831081095 [email protected]
Leather shoe, Industrial Later shoe, Safety Leather Shoe, Leather belt, Wallets, Bags etc.
44. M/S- NAMITTER. Mitra House, 4, Manmatha Dutta Road, P.O.Belgachia,
E-Mail: [email protected] Website :
Safety Hand Gloves, productive (Flame retardant/Heat/Abrasion/ Acid/Oil Resistant) Boots
Kolkata – 700 037
www.a1namittersafety.com Fax L 91-033-2556 8057 Mob. 98300 45564/92315 61466.
etc.
45. Siliguri Water Purifying Agency, Asrampara, Siliguri- 734001.
9233404333 Water Filter & Water Treatment Plant Manufacturer
46. Sign-In Project Development (P) Ltd. 29, Nandalal Basu Sarani, College Para, Siliguri-734001.
0353-2526799 9733251985 E-mail - sanjib.dey@ signinprojects.com
Computer software, computer training, assistants to entrepreneurs, project assistance etc.
47.
The New Chemical Corp. of India. 149, Bidhan Park. Kolkata-700090.
9831857310 E-mail [email protected]
Anti-rusting & anti-corrosion chemicals iron & steel surface cleaning
48. M/S- L.D.Bhattar & Co. P-40, India ExchangePlace. Kolkata-700001.
9831462727 E-mail - [email protected]
Various types electrical cables, flexile tapes, cord &shunts glass covered copper wires etc.
49. M/S- Arc Welding Works. 81B, A.K.Mukherjee Road. Kolkata-700090.
9433114894 E-mail - [email protected]
Agriculture & Farming Equipments, various engg. Products
50. S.S.Enterprise, Sodepur, Kolkata-700 110
9332904474 E-mail - [email protected]
Water purification system
51. M/s Somani Engg. Enterprise 6C-Lala Rajpat Rai Sarani, 4th floor, Kolkata – 700 020 .
033 3052 0596 E-mail - [email protected]
Ferrous & non-ferrous components , fabricators of stainless steels.
52. Baishali Steels Pvt. Ltd. 39 Strand Road Room No. – 40, 1st Floor, Kol;kata – 700 001
033 3293 4126 E-mail - [email protected]
Stainless Steel Water Shrink & Basin stands & bathroom fittings
53. Integrated Fire Protection Pvt. Ltd. Rajbaripara, Dist- Jalpaiguri.
9903973904 E-mail - [email protected]
Fire extinguisher chemical, form Instruments etc.
Garden Reach Shipbuilders & Engineers Ltd (GRSE)
Garden Reach Shipbuilders & Engineers Ltd (GRSE), a Govt. of India Undertaking under
the Ministry of Defence, has emerged as a leading shipyard of India, building a wide array of
vessels, from world class Frigates to Fast Interceptor Boats. In keeping with the global trends,
GRSE has embarked upon modernization of its infrastructural facilities. GRSE has got the status
of Mini Ratna - Category I.
GRSE Ltd. is the first Ship Building organisation in the country and the first DPSU to get
accreditation on Integrated Management System harmonizing ISO 14001:2004 (Environment
Management System), BS OHSAS 18001:2007 (Occupational Health & Safety Assessment
Standard), and EN ISO 50001:2011 (Energy Management System).
The GESE Ltd., as a central PSU, procures a huge quantum of supplies of materials,
parts, sub-assemblies etc. from the Micro, Small & Medium enterprises throughout the country
for their ship building works. A profile of various products/items manufactured by GRSE Ltd. is
presented below:
A) Ship Building: 1. Frigate 2. Anti Submarine Warfare Corvette 3. Missile Corvette 4. Landing Ship Tank 5. Landing Craft Utility 6. Survey Vessel 7. Fleet Replenishment Tanker 8. Fast Patrol Vessel 9. Off shore Patrol Vessel 10. In Shore Patrol Vessel 11. Fast Attack Craft 12. Hover Craft 13. Fast Interceptor Craft
B) Engineering: 1. Portable Bridge 2. Deck Machinery Items 3. Pumps
C) Engines - MTU Engines
Garden Reach Shipbuilders & Engineers Ltd (GRSE)
V.R. FORM NO – QA/03/0057
APPLICATION FOR REGISTRATION OF VENDOR (To be submitted by vendor)
(THIS INFORMATION WILL BE TREATED AS CONFIDENTIAL) PART –I: ADMINISTRATIVE INFORMATION
1. Name of the Vendor
___________________________________________________________________________
___________________________________________________________________________
2. (a) address of registered office (Please do not repeat the name)
___________________________________________________________________________
_______________________________ PIN _____________________________________
Phone ____________________________ e-‐mail ID_________________________________
Fax _______________________________ STD code________________________________
Contact person & Mob. No. _____________________________________________________
(b) Address of the factory :
___________________________________________________________________________
___________________________________________________________________________
Phone _________________________ e-‐mail ID_____________________________________
Fax ____________________________ STD Code__________________________________
Contact person & Mob. No._____________________________________________________
(c) Address of local branch / stockists (if any)
___________________________________________________________________________
___________________________________ PIN ___________________________________
Phone ____________________________ e-‐mail ID_________________________________
Fax _______________________________ STD Code____________
Contact person & Mob. No._____________________________________________________
3. Date of incorporation: _____________________
4. Category of industry: _____________________
(a) Large scale (Attach relevant registration documents)
(b) Medium scale
(c) Small scale
(d) Non of above
Annexure I -‐ 2/ 8
5. Nature of company: ________________________________________
(a) Proprietary
(b) Private limited
(c) P.S.U.
(d) Public limited or ex-‐serviceman unit.
(e) Partnership.
NOTE: (i) Give name, residential address with telephone of proprietor for (a)
(ii) Give name designation, residential address of chief executive or
Managing Director for (b), (c).
(iii) Addresses, name, telephone no with partnership deeds (if
partnership firm) of partners in extra sheets as Annexure__________
6. Nature of business : _____________________________________________
(a) Manufacturing.
(b) Trader.
(c) Sole selling or authorised agent.
(d) Dealer.
(e) Assembler.
(f) Processor
(g) Repacker
7. Details of current products and services
(Attach details and literature): ___________________________________________
8. Details of registration with: _____________________________________________
(a) NSIC / SSI. (Attach relevant copies of registration letters)
(b) DGS&D
(c) Other Defence Dept.
(d) Other Govt. Dept.
(e)Membership of FICCI/ASSOCHAM _________________________________
/CCI / AIMO and other Industrial Associations.
9. Have you already applied: ____________________________________________
For registration to any other shipyard?
Annexure I -‐ 3/ 8
10. If yes, also give the following details:
(a)Authority to whom applied (b) Date (c) Item applied for (d) Result of application with Details viz Regn. No. If Registered and reasons if not Registered
11. Have you got ISO 9001/2000 certificate: _________________________________ (If yes give details)
12. Total area of factory / business premises
Covered Uncovered Bonded space available No. of Rooms
____________________________________________________________________________________
13. Is the above said Factory::____________________________________________
(a) Company owned.
(b) Partnership.
(c) Rental.
(d) Leased.
NOTE: Attach proof of ownership and details site plan of layout of Premises clearly depicting various areas e.g. production area, stores, bond rooms, inspection area etc. In case factory premises are rented / leased attach lease deed and recent rent receipt (within 3 months) and old one (one year or more) and give details of the owner (name, address, telephone / e-‐mail ID / FAX no)
14. Capital out lay :
15. Name of bankers & A/C No :
___________________________________________________________________________ ____________________________________
Annexure I -‐ 4/ 8
16. Address of the Bankers:
___________________________________________________________________________
___________________________________________________________________________
PIN _____________________________ Phone ____________________________________
e-‐mail ID_________________________ Fax_______________________________________
STD Code ______________________________________________________________ ____
Contact person & mob. No._____________________________________________________
17. Electric power sanctioned: _________________________________________________ a) Installed b) Standby (if any)
18. Does your product under: _________________________________________________
Verification fall under
(a) Cost audit. (Report) Rules 1968
(b) Fire safety or explosive regulations.
(Give details of license / compliance)
19. Details of manpower employed
On date on firm’s pay roll: __________________________________________
(a) Permanent Category Post held Number Qualification Total Service ____________________________________________________________________________________ Technical Prod. Manager Q.C. Manager
Supervisor Testing staff (QC)
Workers (skilled) Workers (unskilled)
Admin Purchase Manager
Accounts Officer Office Super indent
Clerical
Annexure I -‐ 5/ 8 (b) Temporary Category Post held Number Qualification Total Service ____________________________________________________________________________________ Technical Prod. Manager
Q.C. Manager Supervisor Testing staff (QC) Workers (skilled)
Workers (unskilled) Admin Purchase Manager Accounts Officer
Office Super indent Clerical Others
____________________________________________________________________________________
20. Attach copies of documents for: (A) Audited balance sheets and profit & loss A/C for three years and total accumulated losses, if any. (B) Present net worth of the firm. (C) Source of finance with borrowing limit & bank guarantee. (D) PAN no/ income tax returns for the last three years. (E) Service tax registration certificate. (F) Valid state, central sales tax registration certificate. (G) Facilities for water, fire fighting, security & medical. (H) Relevant information with complete details about sister concerns / subsidiaries if any. (j) Pollution control board certificate (k) Details of orders received in last 3 years for items under consideration. (l) Performance report for executed order, for which registration sought. (m) Have you faced blacklisting/ tender holidays by any PSU in last 5 years. If yes, please give details.
Annexure I -‐ 6/ 8 PART –II: TECHNICAL INFORMATION
1. Details of current products: ____________________________________________________________________________________ Sl no. Type description Licenced / installed Annual production capacity for preceding 3 years _____________________________________________________________________________________ 2. Details of foreign collaboration: _____________________________________________________________________________________ Sl No. Product name & address Year of collaboration (Current or not) __________________________________________________________________________ __________ ____________________________________________________________________________________ 3. Details of stores / equipment for which registration is sought
____________________________________________________________________________________ Sl. No. Nomenclature of Stores /Eqpt. Drg. No. Related specifications ____________________________________________________________________________________ _____________________________________________________________________________________ 4. (a) Details of bought out items ( component / sub assy / assy / processes ) from sub contractors : (attach copies of agreements, if any) _____________________________________________________________________________________ Sl No. Main Eqpt. Details of test Name & Address of sub contractor ___________________________________________________________________________ _________ _____________________________________________________________________________________ (b) Details of testing / quality control done by sub-‐contractors (attach copies of agreements where applicable) _____________________________________________________________________________________ Sl No. Main Test Eqpt Detail of agreement Name & address of sub-‐contractor / Lab _____________________________________________________________________________________
Annexure I -‐ 7/ 8
5. Source of raw material: _____________________________________________________________________________________ Sl Imported/ brief description Estimated %FE content No. Indigenous CIF value. in final product _____________________________________________________________________________________
____________________________________________________________________________________
6. Please give details of important facilities & infrastructure as per following format for : (a) Production (including heat treatment dies, jigs & fixtures etc…and also
details on licenced capacity, installed capacity & licence no and date )
(b) Unconventional, special M/c , CAD/CAM, ROBO etc… _____________________________________________________________________________________ Sl Description Make & qty Date of Apprpx percentage No. of M/c & Model purchase cost depreciation per year ____________________________________________________________________________________
____________________________________________________________________________________
(c) Tool room, meteorology & test equipment & facilities: ______________________________________________________________________ _____________ Sl Types of Inst, Make model Qty Date of purchase Frequency of calibration No. gauges, test eqpt (*) ___________________________________________________________________________ ________
___________________________________________________________________________________
( * ) attach relevant calibration certificate.
7. Is the firm willing to supply spares
for 7 years from date of last supply : ______________________________________
8. Furnish the following details with relevant certificates and documents :
(a) R & D facilities available.
(b) Inspection & quality control of raw material, components and finished products
Annexure I -‐ 8/ 8
(c) Assistance from central agency for testing / calibration etc.
(d) Laboratory and drawing office facility
(e) Flow process chart of item for which registration sought.
(f) Basis of estimated production of products for which registration is sought.
9. Principal customers : _________________________________________________________________________
Sl No. Name & SO No. & Date of Products value Address date Last supply supplied
_____________________________________________________________________________
______________________________________________________________________________
10. Future plan if any in respect of expansion programme: (attach extra sheets) Installation of additional machines/test facilities etc.
Note : kindly put number or codify the extra sheets & annexure attached according to serial number and link it properly.
11. Declaration :
I / we hereby declare that all information / data furnished in the application form and attached annexures and other documental proofs as required for my / our enlistment with GRSE Ltd. are true and correct. If any information is found to be incorrect / false at any stage, I / we shall be liable for any action as deemed fit by GRSE Ltd. including removal / banning of My / Our firm.
________________________ ______________________________ WITNESS WITH ADDRESS SIGNATURE (S) WITH SEAL OF
COMPETENT AUTHORITY OF VENDOR Date :
Place :
12. Demand draft in favour of “Garden Reach Shipbuilders & Engineers Limited”, payable at “Kolkata” is to be enclosed. Amount of DD – Rs. 5000/-‐ for large and medium industry and Rs. 2000/-‐ for small industry/traders.
PHOTOGRAPHS OF THE TECHNICAL SESSIONS
Shri S.Banerjee, AGM, Purchase and Shri P.S.Bose, Dy. Manager, Purchase, GRSE Ltd. Delivering the Power Point Presentation on the Vendor Registration Procedure of during the Technical Session
A Section of the Audience
Mr. K.D. Bhattacharya, Dy. Director, MSME-DI, Kolkata delivering his lecture
on the Public Procurement Policy – 2012 during the Technical Session
Mr S. Sarkar, Dy.General Manager (MM) of Balmer and Lawree Co. Ltd., Kolkata being felicitated during the Technical Session of NLVDP AT Kolkata
LIST OF ITEMS PROCURED EXCLUSIVELY FROM M.S.E. SOURCES BY GARDEN REACH SHIPBUILDERS & ENGINEERS LTD., KOLKATA
SL. NO. ITEM
1 Air/Room Coolers
2 Ammeters/ Ohm meter/ Volt meter (Electro magnetic upto Class I accuracy)
3 Bandage cloth 4 Barbed Wire 5 Battery Charger 6 Bench Vices 7 Bituminous Paints 8 Bolts & Nuts 9 Boots & Shoes of all types including canvas shoes 10 Brooms 11 Brushes of all types 12 Buckets of all types 13 Centrifugal Pumps suction & delivery 150 mm. x 150 mm 14 Chappals and sandals
15 Cleaning Powder 16 Cloth Jaconet 17 Coir mattress cushions and matting 18 Coir Rope hawserlaid 19 Conduit pipes 20 Diesel engines upto 15 H.P 21 Disinfectant Fluids 22 Distribution Board upto 15 amps 23 Dust Bins 24 Emergency Light (Rechargeable type) 25 Fire Extinguishers (wall type) 26 Hand gloves of all types 27 Hand Pump 28 Hand Tools of all types 29 Helmet Non-Metallic 30 Hydraulic Jacks below 30 ton capacity 31 Lamp holders 32 Linseed Oil 33 Machine Screws 34 Mallet Wooden 35 Measuring Tapes and Sticks 36 PVC pipes upto 110 mm 37 Rivets of all types 38 Steel Almirah 39 Steel Chair 40 Steel racks/shelf 41 Stockinet 42 Studs (excluding high tensile) 43 Tarpaulins 44 Trolley 45 Water tanks upto 15,000 litres capacity
List of Items Purchased By Garden Reach Shipbuilders and Engineers Ltd.: - 1. Electrical Items
2. 100 KVA Capacity Automatic Voltage Controller
3. Inclinometer
4. AMC for Crane
5.12 MM dia MS ROD IS2062
6. Underwater Flood Light LCU Project
7. Synthetic Grating.
8. Washing Machine.
9. Control Panel and Push Button Along with Spares.
10. Solar Power Plant.
11. Gauge Glass.
12. Submersible Pump.
13. Annual rate Contract for Transportation of Portable Steel Bridge and Bridge Material
14. 150 NB SDNR Valve.
15. Flax Canvas.
16. Clamp Transom GBB6 Galvanized as per GRSE Drawing.
17. Foam Pillow, Blanket, Bed sheet.
18. Chord Bolt Short.
19. Aluminum Vertical and Rung Ladders Hand Holds and Vertical Steel Ladders
20. OBM Cleaning and Stowage Tank.
21. Contract for Insulation Work.
22. Paints.
23. Folding Chairs.
24. Annual Rate Contact for fitment of Aluminum Alloy Awning Stanchions.
25. Tools for GRSE.
25. ERW Pipe for GRSE.
26. Towing Bollard for GRSE.
27. Engg. ACVR Allow.
28. Deck Machinery Material Handling Equipments
29. Hand Head Signaling Torch
30. Cock Assly for LCU Yard
31. Rod and Half Round Bar IS 2062
32. Rate Contract for Blasting & Painting underwater
33. Flags 31 Types
34. Fire Fighting System
35. First Aid Box
36. Ball Valve Flanged and 40NB SDNR Glove Valve
37. Portable Ladder
38. Hiring of DG Sets
39. Alloy Sheet
40. MS OBM Stowage Cleaning Tank
41. Liferaft and Hydrostatic Release Gear
42. Rain Coat and Gum Boot
43. AMC for removal and disposal of refuses garbages etc.
44. Fasteners for GRSE Yard
45. Gauge Glass Assembly and Sight Glass
46. Synthetic Polyester
47. Server and Related Hardwar
48. Special Paints for GRSE
49. Brown Leather Belt
50. Steel Plate to IS 2062
51. Annual Rate Contrat for Bending of Pipes
52. Subcontract for Cleaning of Vegetation and Grass
53. DMR Plate 249 AR ABA
54. Rate Contract for Electrical Work
55. Junction Box
56. STD Stiffened Steel Deck
57. Fitment of Chequered Plate
58. Portable Lub Oil Test Kit
59. Vertical Ladders
60. Plotting Table for GRSE
61. Gear Box For mooring Capstan
62. Hiring Of Electric Motor Driven Air Compressor
63. Audio Visual Alarm Indication Panel
64. Transition Joints
65. Items Under Modular Accommodation
66. Breathing Apparatus System
67. Handset With Cradle and 25M Lan Cable
68. AMC For Cranes
69. Synthetic Polyester
70. 100 KVA Capacity Automatic Voltage Controller
71. 100 KWP Solar Power Plant
73. 1000V Megger and 3D 100 Crimping Tools
74. Annual Job Contract For Total House Keeping Work
75. Supply Of Mobile Air Cooler
76. Pipes Clamps Supports
78. Stairs For GRSE Yard
79. Seamless Steel Forged Bend
80. Wooden Grating
81. EBXL Cable For GRSE
82. Cast Steel Wheel
83. Bearing (Galvanised)
84. DMR Plate 249 AR ABA For LCU 5 and 7
85. CCTV Surveillance System
86. Frame Bracing Galvanised Part No GBB2 with Bidders Material
87. Annual Rate Contract For Bending Of Pipes
88. Steel Plate To IS 2062
89. Annual Maintenance Contract Electro Mechanical Of EOT Cranes
90. Flooding Inicator Switch For IPMS For ASWC
91. OBM Cleaning And Stowage Tank
92. Electric Motor Driven Air Compressor
93. M 24 X 95 AL Bronze Bolt With Nut
94. Data Entry Job In C and CP Department
95. Rate Contract For Fabrication And Erection Of Balance HOF
Items For LCUS
96. Flax Canvas Grade C
97. EN Block Putty For Gland Packing
98. DMR Plate 249 AR ABA
99. Various Types Of MS Angle MS Channel And MS Joist
100. Surface Demand Diving Equipment
102. Sea Chest Rose Plates
103. Contract Work For Carrying Out Canteen Services Cleaning Services Gardening Service
Office Service And Workshop Service
104. Fabrication Of B11 Block With Pre Outfitting
105. Engg ACVR Allow
106. Quick Resease Arrange Starboard Complete SS Hook
107. Wooden Grating
108. Anchor Capstan Gear Box ASSY
109. Switches For GRSE
110. Annual Rate Contract For Fabrication Of Aluminium Allow Blocks And Fitment Of Outfit
Items
111. Supply Of Magntic Lvel Switch
112. Cable
113. Hot And Cold Water High Pressure Jet Clearner
114. Transition Joints
115. Multidisc Torque Limiter
116. Al Bronze Bolt With Nut
117. Reciprocation Pump With Saction And Delivery Hose Non Return Valve And Trolley With
Suction Tank
118. Annual Rate Contract For Fabrication And Erection Of Solid And Slotted Angle
119. Blue Colour Lcotton Socks
120. Pedestak Fan And Ceiling Fan
121. Ceramic Backing Strip GRSE Yard
123. Control Panel And Push Button Along With Spares
124. Folding Chairs
125. Procurement Of Electric Safety Lamp Hand Lanton
126. MS Angle MS Channel And MS Joist
127. Server And Related Hardware
128. Pipes Clamps And Supports
129. Quick Release Arrane Starboard Complete Ss Hook Ship Name Side And Non Watertight
Single Skin Door
130. HDPR Tarpaulins Both Side Laminated
131. Rate Contract For Erction Of Aluminium Super Structure
132. Light Fittings
133. Switch Socket And Plug
134. Rate Contract For Opening An Closing Of Lock
Chittaranjan Locomotive Works (CLW)
Chittaranjan Locomotive Works (CLW), an ISO – 9001/14000 unit, Govt. of
India, located at Chittaranjan, Dist. – Burdwan, West Bengal, manufactures electric
locomotives -- 25 kv ac loco with three phase ac drive, 25 kv ac locomotive with dc
drive. It is one of the largest Electric Locomotive manufacturers in the world. CLW also
manufactures AC & DC Traction motors, Switch gears/Control gears, Bogies cast &
fabricated, Wheel sets & Steel casting. Chittaranjan Locomotive Works (CLW) has been
named after the great freedom fighter, leader and statesmen Deshbandhu Chittaranjan
Das. The production activity started on 26th January, 1950 the day when India became
Republic. The initial product of Chittaranjan Locomotive Works was Steam Locomotive.
In the period 1950-1972 Chittaranjan Locomotive Works turned out a total number of
2351 Steam Locomotives. From 1968 to 1993 CLW produced 842 Diesel Locomotives
and from 1961 to 31-3-13 total 4916 nos. of Electric locomotives of different types.
The Product Profile of CLW:
1. Locomotive:
a) WAG – 7 5000 HP 25 KV Crew Friendly AC Freight Electric Locomotive
b) WAP – 4 5000 HP 25 KV Passenger Electric Locomotive
c) WAG – 9 6000 HP 25 KV 3 - Phase Freight Electric Locomotive
d) WAP – 5 5400 HP 25 KV 3 - Phase Passenger Electric Locomotive
e) WAP – 7 6000 HP 25 KV 3 - Phase Passenger Electric Locomotive
2. Steel Foundry:
PRODUCT MIX OF STEEL FOUNDRY:
PRODUCT RANGE
Grade of Steel:
Steel Foundry manufactures steel castings generally complaint with grades IS-1030 and AAR-201. To meet the requirements of different products, Steel Foundry had earlier been processing eight different grades of metal. Steel Foundry has been successful in rationalizing the same to five grades only without affecting any metallurgical, chemical or physical properties. This has resulted in improvement in productivity.
Different grades of steel for castings are as follows:-
Grade Composition in Percentage
Carbon Manganese Sulphur (max.)
Phosphorus (max)
Silicon (Max)
Grade-I 0.22 – 0.26 0.08 – 1.00 0.025 0.025 0.50
Grade-II 0.18 – 0.22 0.70 – 0.90 0.040 0.040 0.50
Grade- III 0.20 – 0.32 1.40 – 1.85 0.030 0.030 0.065
ON LINE VENDOR REGISTRATION FORM OF CLW: -
TERMS & CONDITIONS: -
The list of items purchased by CLW:
1. Twin Beam Head Light with Twin Filament Halogen Lamp
2. PVC Insulated and un-sheathed single core standard bright Annealed Copper Conductor.
3. Heavy Duty Core Drilling machine
4. 70 watt metal halide Lamp
5. Set of Spring for WAP-4 Locos
6. Set of Cable Terminal/Socket (119 items) for WAP-4.
7. Crew Fan
8. Pantograph for A.C. Freight Electric Locomotive
9. Side Sill Assembly for WAP-5 loco
10. Blind Installation LH and RH
11 Wind Screen Assembly.
12. LED Marker Light
13. Side Wall Assly. Type WAP-4
14. Horn Lever for WAG-7 and WAP-4
15. Set of Pneumatic Cocks for Crew Friendly locos
16. Copper Flat 40x7 m and Copper Flat 30x4 mm
17. Microprocessor based electronic speed indicating recording & energy monitoring System.
18. Roller Bearing [PE] NU330 EAMCG 188 EP6a HITACHI WORKS
19. Tapered Roller Bearing [RWE]
20. Central under frame Assembly for WAH-9/WAP-7
21. Centre Sill Complete for WAG-9H loco
22. Modified Cow Catcher Assembly For LOCO
23. Completely Assembled Temperature Sensor
24. Temperature Censor Oil Circuit Transformer
25. Hitachi Gear Case Assembly
26. Transformer Braking Excitation
27. Traction Motor Type -HS 15250A With Earth Brush Assembly
28. Disc Brake Arrangement, Wheel Mounted Brake Disc For WAP-5 Electric Locomotive
29. Central under Frame Assembly for WAP-5 Locomotive
30. M.S. Plate, IRS M-41,Gr.I
31. Printed Shrink Down Sleeve-06 item of different size
32. Hiring of AC/Non AC vehicles
33. Bolster Assembly for WAG-9H Loco to CLW
34. Commutator Assembly (Complete) For Hitachi Traction Motor)
35. S.S.Pipe Fittings for WAG-9H for CCB Brake System)
36. Brass Pipe Fittings for WAG-9H and WAP-7 for CCB Brake System
37. Brake Control System Including Drivers Vigilance Control Device For WAG-9 AND WAP-7 Class
Of Locomotive
38. Transformer
39. Circuit Breaker (DJ) Vacuum Rated Current 1000 AMPS(RMS)
40. Steel Chequered Plates for WAG-9/WAP-7
41. Aluminum Pressed Section for WAG-9
42. Paint and Thinner
43. Set of Brass Items used in WAG-7/WAP-4
44. Blower for oil cooling unit with casing including 30 KW motor for oil cooling Unit
45. Complete machining with all brake rigging assembles of Tri ? Mount Cast Steel Co-Co Bogie
46. Gear Wheel
47. Commutator Pole Core Punching
48. Driver Display Unit Or WAG-9, WAP-7 AND WAP-5 Electric Locomotive
49. Magnet Frame And Associated Components For Hitachi Traction Motor
50. Steel Pipe Fitting For WAG-9/WAP-7
51. Steel Pipe
52. Bogie Frame Assembly
53. Blower for Transformer Oil Cooler with Motor
54. Crown Gear Coupling (Hurth Coupling) for WAP-5 loco
55. Sweeping Cleaning and Dumping of Wasted Materials
56. Armature Assembly Of Hitachi Traction Motor
57. MICA Glass Fabric Tape
58. Horn Lever for WAG-7 and WAP-4
59. Tread Brake Arrangement Complete
60. Filter Cubicle fo WAG-9, WAP-7, WAP-5 Locomotive
61. Inspection, Testing & Certification of Unfired Pressure Vessels, Chain Slings Used In EOT Cranes
62. Microprocessor Based Control and Fault Diagnostic System
63. Bolster Arrangement [Fabricated]
64. Oil Pump Transformer along with Motor [wound with corona resistance Wire]
65. Lead Pig Grade 99.97 percent
66. Fire Extinguishing system with accessories
67. AMC of CNC Machining Centre
68. Complete BA-1 BA-2 BA-3 Panel Along with All Equipments And Complete Cabling And Copper
BUS Bar For WAG-7 Locomotive
69. Dummy Pinion
70. Ophthalmic Combined A and B Scan with Video Printer
71. Connectors And Terminals [Copper]
72. Sand Box Assembly for WAG-9/WAP-7)
73. Ducting Assly,[Excluding Ducting Elbow]
74. Armature Shaft (Rough Machined)
75. IGBT Based 3 – Phase Drive Propulsion Equipment
76. Civil Construction
77. Transportation Vehicles
78. Capacitor
79. Wheel Set Guide
80. S.S. Pressed Section
81. Head Stock Assembly for WAP-5 Loco
82. Windows for WAP-4/WAG-7/WAG-9/WAP-7 and WAP-5
83. M.S. Plate
84. Printed Shrink Down Sleeve
85. Bifurcated Rivets POM
86. Blocking Diodes for Illumination Test
87. Lead Acid Battery
88. Drivers Desk Structure For Electric Loco Type WAG-7 and WAP-4
89. Copper Main Pole Potted Coils For HTM
90. Filter Assembly
91. Programme Switches for 25 KV AC Electric Locomotives
92. Modified Spacious Cab [AC] Structure Assly. For WAG-7
93. Head Stock Assembly for WAG-9H
94. 8 inch x 8 inch Brake Cylinder Mounting
95. Set of Chequered Plates for Flooring Arrangement
96. Screw Hex Head for WAG-9/WAP-7
97. Induction Heater
98, Complete Brake Gear Arrangement.
99. Compressor Main [MCP] With Motor
100. Set of Roller Bearing
101. Reservoir 203 Litres for Electric Loco Type WAG-7 and WAP-4
102. Master Controller for 3 Phase Electric Locomotives WAG-9,WAP-7 and WAP-5
103. Motor Set for Traction Motor
PHOTOGRAPHS OF THE EXHIBITION PAVILION
PHOTOGRAPHS OF THE EXHIBITION PAVILION
PHOTOGRAPHS OF THE EXHIBITION PAVILION
PUBLIC PROCUREMENT POLICY – 2012