komponenten- katalog components catalogue · andere abmessungen und ausführungen auf anfrage....
TRANSCRIPT
Komponenten-KatalogComponentsCatalogue
Vakuumtechnik
3
KF-Bauteile nach DIN 28403 StandardmaßeComponents KF according to DIN 28403 standard dimensions 4-16
ISO-K-Klammerflansche nach DIN 28404Clamping flanges ISO-K according to DIN 28404 17-26
CF- und COF-BauteileComponents CF and COF 27-42CF-Bauteile nach ISO / TS 3669-2 Components CF according to ISO / TS 3669-2 27-38
COF-Bauteile Components COF 39-42
Membranbälge, Hochvakuum- und Ultrahochvakuum-Ventile, GasschleusenEdge welded bellows, high and ultra high vacuum valves, gas locks 43-52Membranbälge Edge welded bellows 45
Hochvakuum-Ventile High vacuum valves 46-49
Gasschleusen Gas locks 50
Ultrahochvakuum-Ventile Ultra high vacuum valves 51-52
Zubehör für VakuumpumpenAccessories for vacuum pumps 53-58Feinvakuum-Adsorptionsfallen Molecular sieve traps 54
Kondensatabscheider Condensate traps 55-56
Stickstoff-Tiefkühlfallen Nitrogen cold traps 57-58
DurchführungenFeedthroughs 59-66Stromdurchführungen Electrical feedthroughs 60-65
Flüssigkeitsdurchführungen Liquid feedthroughs 66
Dreh- und Lineardurchführungen für Hochvakuum Rotary and linear motion feedthroughs for high vacuum 66
UHV-TechnikUHV technology 67-70
InhaltsverzeichnisContent
Die Preise sind gültig ab Oktober 2007. Preisänderungen
vorbehalten. Berechnet werden die am Bestelltag gültigen
Preise in Euro, zuzüglich gesetzlicher Mehrwertsteuer. Die
Preise verstehen sich ausschließlich Transport, Verpackung
und Versicherung. Die Lieferung erfolgt ab Werk Wertheim.
Änderungen im Sinne des technischen Fortschritts bedürfen
keiner vorherigen Ankündigung des Herstellers.
Prices are effective from October 2007 and are subject to
change without notice. Prices are based on date of order in
Euro, plus VAT. The prices are quoted excluding transport,
packing and insurance. Delivery will be effected ex works
Wertheim.
Changes due to technical progress do not require prior
announcement by the manufacturer.
5Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
KF-Spannring, Alu-DruckgussClamping ring, die-cast aluminium NennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 10 ⁄ 16 42 61 16 22 100 1016 7,00
DN 20 ⁄ 25 54 72 16 32 100 2025 8,00
DN 32 ⁄ 40 70 90 16 46 100 3240 10,00
DN 50 95 123 25 62 100 0050 21,50
KF-Pratze mit Schraube, AluminiumClaw with screw, aluminium NennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 10 - DN 50 20 12 14 20 100 0000 3,00
NennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
DN 10 30 12,2 14 2,0
DN 16 30 17,2 20 2,0
DN 20 40 22,2 25 2,0
DN 25 40 26,2 28 2,0
DN 32 55 34,2 38 2,0
DN 40 55 41,2 45 2,5
DN 50 75 52,2 57 3,0
KF-AnschlußmaßeMounting dimensions KF
NennweiteNominal width
AbmessungenDimensionsMinimal Ø A (mm) B (mm) C (mm)
PratzenClaws(St./pcs.)
GewindeThread
DN 10 10 12,2 45 2 2xM6
DN 16 16 17,2 45 2 2xM6
DN 20 21 22,2 55 3 3xM6
DN 25 24 26,2 55 3 3xM6
DN 32 34 34,2 71 3 3xM6
DN 40 40 41,2 71 3 3xM6
DN 50 51 52,2 91 3 3xM6
Anschlußmaße für die Befestigung mit Pratzen Mounting dimensions for claw fastening
KF-
Bau
teil
e C
ompo
nent
s K
F
6 Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
KF-Zentrierring, Edelstahl, mit O-Ring, VitonCentering ring, stainless steel, with O-ring, VitonNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 15 17 104 0016 7,50
DN 25 24 26 104 0025 9,00
DN 40 39 41 104 0040 13,00
DN 50 49 52 104 0050 20,00
KF-Spezial-Spannring, Edelstahl, für MetalldichtungenSpecial clamping ring, stainless steel, for metal sealsNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 10 ⁄ 16 54 22 18 101 1016 45,00
DN 20 ⁄ 25 64 32 18 101 2025 50,00
DN 32 ⁄ 40 82 47 18 101 3240 55,00
DN 50 110 62 20 101 0050 70,00
KF-Leichtmetall-Dichtring, vakuumgeglüht, außenzentriertLight metal seal, aluminium, vacuum annealed, external centeringNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 10 ⁄ 16 32 30 21 102 1016 6,00
DN 20 ⁄ 25 42 40 31 102 2025 7,00
DN 32 ⁄ 40 57 55 46 102 3240 8,00
DN 50 77 75 66 102 0050 18,00
KF-Zentrierring, Edelstahl, mit O-Ring, PerbunanCentering ring, stainless steel, with O-ring, PerbunanNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 15 17 103 0016 6,00
DN 25 24 26 103 0025 7,00
DN 40 39 41 103 0040 9,00
DN 50 49 52 103 0050 15,00
KF-Bauteile nach DIN 28403 StandardmaßeComponents KF according to DIN 28403 standard dimensions
7Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
KF-Übergangs-Zentrierring, Edelstahl, mit O-Ring, PerbunanTransitional centering ring, stainless steel, with O-ring, PerbunanNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 10 ⁄ 16 10 12 17 105 1016 7,00
DN 20 ⁄ 25 20 22 26 105 2025 8,00
DN 32 ⁄ 40 32 34 41 105 3240 10,00
KF-Übergangs-Zentrierring, Edelstahl, mit O-Ring, VitonTransitional centering ring, stainless steel, with O-ring, VitonNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 10 ⁄ 16 10 12 17 106 1016 9,50
DN 20 ⁄ 25 20 22 26 106 2025 13,00
DN 32 ⁄ 40 32 34 41 106 3240 18,00
KF-Außenzentrierring, Aluminium, mit O-Ring, PerbunanExternal centering ring, aluminium, with O-ring, PerbunanNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 10 ⁄ 16 30 32 107 1016 5,00
DN 20 ⁄ 25 40 42 107 2025 6,00
DN 32 ⁄ 40 55 57 107 3240 7,50
DN 50 75 77 107 0050 13,00
KF-Außenzentrierring, Aluminium, mit O-Ring, VitonExternal centering ring, aluminium, with O-ring, VitonNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 10 ⁄ 16 30 32 108 1016 7,50
DN 20 ⁄ 25 40 42 108 2025 8,50
DN 32 ⁄ 40 55 57 108 3240 10,00
DN 50 75 77 108 0050 16,00
KF-
Bau
teil
e C
ompo
nent
s K
F
8 Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
KF mit Rohransatz, lang, EdelstahlPipe socket, long, stainless steelNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 50 16 20 112 0016 20,00
DN 25 55 24 28 112 0025 30,00
DN 40 60 40 45 112 0040 42,00
DN 50 70 51 57 112 0050 60,00
Ersatz-Rund-Dichtring, PerbunanSpare O-ring for centering ring, PerbunanNennweiteNominal width
AbmessungenDimensionsA (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 (10 ⁄ 16) 18 109 0016 1,00
DN 25 (20 ⁄ 25) 28 109 0025 1,50
DN 40 (32 ⁄ 40) 42 109 0040 2,00
DN 50 55 109 0050 2,50
Ersatz-Rund-Dichtring, VitonSpare O-ring for centering ring, VitonNennweiteNominal width
AbmessungenDimensionsA (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 (10 ⁄ 16) 18 110 0016 2,50
DN 25 (20 ⁄ 25) 28 110 0025 3,00
DN 40 (32 ⁄ 40) 42 110 0040 3,50
DN 50 55 110 0050 4,50
KF mit Rohransatz, kurz, EdelstahlPipe socket, short, stainless steelNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 22 16 20 111 0016 12,00
DN 25 22 24 28 111 0025 18,00
DN 40 30 40 45 111 0040 30,00
DN 50 30 51 57 111 0050 50,00
KF-Bauteile nach DIN 28403 StandardmaßeComponents KF according to DIN 28403 standard dimensions
9Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
NennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 5,5 – 17,2 30 113 0016 6,00
DN 25 5,5 19,1 26,2 40 113 0025 7,50
DN 40 5,5 31,6 41,2 55 113 0040 12,00
DN 50 6,0 42,2 52,2 75 113 0050 20,00
KF-Blindflansch, EdelstahlBlank flange, stainless steel
NennweiteNominal width
AbmessungenDimensionsA (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 25 ⁄ 16 28 114 2516 34,00
DN 40 ⁄ 16 28 114 4016 39,00
DN 40 ⁄ 25 28 114 4025 42,00
DN 50 ⁄ 16 28 114 5016 50,00
DN 50 ⁄ 25 28 114 5025 54,00
DN 50 ⁄ 40 28 114 5040 60,00
KF-Reduzierstück, EdelstahlReducing piece, stainless steel
KF-Winkelstück 90°, EdelstahlElbow 90°, stainless steelNennweiteNominal width
AbmessungenDimensionsA (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 40 115 0016 45,00
DN 25 50 115 0025 56,00
DN 40 65 115 0040 98,00
DN 50 70 115 0050 148,00
KF-Reduzier-Winkelstück 90°, EdelstahlReducing elbow 90°, stainless steelNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 25 ⁄ 16 50 45,0 116 2516 54,00
DN 40 ⁄ 16 65 52,5 116 4016 72,00
DN 40 ⁄ 25 65 57,5 116 4025 76,00
DN 50 ⁄ 16 70 56,5 116 5016 120,00
DN 50 ⁄ 25 70 59,5 116 5025 130,00
DN 50 ⁄ 40 70 67,5 116 5040 148,00
KF-
Bau
teil
e C
ompo
nent
s K
F
10 Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
KF-T-Stück, EdelstahlT-piece, stainless steelNennweiteNominal width
AbmessungenDimensionsA (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 40 117 0016 59,00
DN 25 50 117 0025 82,00
DN 40 65 117 0040 110,00
DN 50 70 117 0050 195,00
KF-Reduzier-T-Stück, EdelstahlReducing T-piece, stainless steelNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 25 ⁄ 25 ⁄ 16 50 45,0 118 2516 82,00
DN 40 ⁄ 40 ⁄ 16 65 52,5 118 4016 105,00
DN 40 ⁄ 40 ⁄ 25 65 57,5 118 4025 112,00
DN 50 ⁄ 50 ⁄ 16 70 56,5 118 5016 155,00
DN 50 ⁄ 50 ⁄ 25 70 59,5 118 5025 170,00
DN 50 ⁄ 50 ⁄ 40 70 67,5 118 5040 190,00
KF-Meß-T-Stück, EdelstahlT-piece with gauge connection, stainless steelNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 25 ⁄ 16 ⁄ 16 50 45,0 119 2516 82,00
DN 40 ⁄ 16 ⁄ 16 65 52,5 119 4016 104,00
DN 40 ⁄ 25 ⁄ 25 65 57,5 119 4025 112,00
DN 50 ⁄ 16 ⁄ 16 70 56,5 119 5016 170,00
DN 50 ⁄ 25 ⁄ 25 70 59,5 119 5025 192,00
DN 50 ⁄ 40 ⁄ 40 70 67,5 119 5040 230,00
KF-Bauteile nach DIN 28403 StandardmaßeComponents KF according to DIN 28403 standard dimensions
11Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
KF-Kreuzstück, Edelstahl4-way cross, stainless steelNennweiteNominal width
AbmessungenDimensionsA (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 40 120 0016 90,00
DN 25 50 120 0025 115,00
DN 40 65 120 0040 155,00
DN 50 70 120 0050 250,00
KF-Reduzier-Kreuzstück, EdelstahlReducing 4-way cross, stainless steelNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 25 ⁄ 25 ⁄ 16 ⁄ 16 50 45,0 121 2516 120,00
DN 40 ⁄ 40 ⁄ 16 ⁄ 16 65 52,5 121 4016 148,00
DN 40 ⁄ 40 ⁄ 25 ⁄ 25 65 57,5 121 4025 158,00
DN 50 ⁄ 50 ⁄ 16 ⁄ 16 70 56,5 121 5016 215,00
DN 50 ⁄ 50 ⁄ 25 ⁄ 25 70 59,5 121 5025 225,00
DN 50 ⁄ 50 ⁄ 40 ⁄ 40 70 67,5 121 5040 270,00
KF-Schlauchtülle, EdelstahlHose nipple, stainless steelNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 ⁄ 12 12 7 125 1612 28,00
DN 25 ⁄ 16 16 10 125 2516 33,00
DN 25 ⁄ 20 20 15 125 2520 34,00
DN 40 ⁄ 16 16 10 125 4016 38,00
DN 40 ⁄ 20 20 15 125 4020 39,00
DN 40 ⁄ 25 25 20 125 4025 40,00
DN 50 ⁄ 25 25 20 125 5025 50,00
KF-
Bau
teil
e C
ompo
nent
s K
F
12 Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
KF-Einschraub-Anschlußstück, Edelstahl, Außengewinde, zum EinklebenPipe socket, stainless steel, with external thread, for paste-inNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 G 1/2 16 30 12 126 1612 30,00
DN 25 G 3/4 20 30 12 126 2534 35,00
DN 25 G1 24 30 12 126 2510 35,00
DN 40 G1 1/4 35 30 12 126 4014 40,00
DN 40 G1 1/2 40 30 12 126 4012 40,00
DN 50 G2 50 35 17 126 5020 60,00
KF-Einschraub-Anschlußstück, Edelstahl, Innengewinde,zum EinklebenPipe socket, stainless steel, with internal thread, for paste-inNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 G 1/2 24 30 12 127 1612 35,00
DN 25 G 3/4 30 30 12 127 2534 40,00
DN 40 G1 40 30 12 127 4010 46,00
DN 50 G1 1/2 52 35 17 127 5012 62,00
DN 50 G2 65 35 17 127 5020 74,00
KF-Quetschverschraubung, Edelstahl, mit O-Ring, Perbunan,für Edelstahlrohr oder Glasrohr Compression fitting, stainless steel, with O-ring, Perbunan,for stainless steel pipe or glass pipeNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 10 10 30 130 1010 160,00
DN 25 12 38 130 2512 170,00
DN 40 20 43 130 4020 180,00
DN 40 24 43 130 4024 180,00
DN 40 25 43 130 4025 180,00
EdelstahlrohrStainless steel pipeNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm)
Artikel-Nr.Order No.
PreisPrice
(€)C (mm)
DN 16 20,0 2 1000 132 1620 40,00
DN 25 28,0 2 1000 132 2528 45,00
DN 40 44,5 2 1000 132 4045 55,00
DN 50 57,0 3 1000 132 5057 70,00
Längen bis 6 m lieferbar. Length up to 6 m available.
KF-Bauteile nach DIN 28403 StandardmaßeComponents KF according to DIN 28403 standard dimensions
13Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
KF / ISO-K-Übergangsreduzierstück, EdelstahlAdapter piece KF / ISO-K, stainless steelNennweiteNominal width
AbmessungenDimensionsA (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 25 ⁄ 63 50 134 2563 120,00
DN 25 ⁄ 100 50 134 2510 160,00
DN 40 ⁄ 63 50 134 4063 130,00
DN 40 ⁄ 100 50 134 4010 170,00
DN 50 ⁄ 63 50 134 5063 140,00
DN 50 ⁄ 100 50 134 5010 185,00
KF / ISO-K-Übergangszwischenstück, EdelstahlAdapter piece KF / ISO-K, stainless steelNennweiteNominal width
AbmessungenDimensionsA (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 25 ⁄ 63 40 135 2563 200,00
DN 40 ⁄ 63 40 135 4063 200,00
DN 40 ⁄ 100 40 135 4010 250,00
DN 50 ⁄ 160 40 135 5016 320,00
KF-Schlauchstutzen, Edelstahl, für PVC-SchlauchHose nipple, stainless steel, for PVC hose NennweiteNominal width
AbmessungenDimensionsA (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 20 16 40 136 0016 20,00
DN 25 32 25 40 136 0025 25,00
DN 40 46 40 40 136 0040 35,00
KF-
Bau
teil
e C
ompo
nent
s K
F
14 Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
PVC-Schlauch, transparent, mit eingegossener StützspiralePVC hose, transparent, with embedded supporting spiralNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm)
Artikel-Nr.Order No.
PreisPrice
(€)C (mm)
DN 16 19 25 1000 137 0016 15,00
DN 25 30 36 1000 137 0025 20,00
DN 40 44 50 1000 137 0040 35,00
PVC-Schlauch, beidseitig mit KF -FlanschPVC hose, with flanges KF on both sidesNennweiteNominal width
AbmessungenDimensionsA (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 250 138 1625 80,00
DN 16 500 138 1650 85,00
DN 16 1000 138 1610 90,00
DN 25 250 138 2525 95,00
DN 25 500 138 2550 99,00
DN 25 1000 138 2510 110,00
DN 40 250 138 4025 120,00
DN 40 500 138 4050 135,00
DN 40 1000 138 4010 160,00
Schlauchbinder, Edelstahl, für PVC-SchlauchHose clamp, stainless steel, for PVC hoseNennweiteNominal width
AbmessungenDimensionsA (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 25 139 0016 2,00
DN 25 36 139 0025 2,50
DN 40 50 139 0040 3,00
KF-Sichtfenster, mit O-Ring, VitonViewport, with O-ring, VitonNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 14 12 140 0016 65,00
DN 25 24 12 140 0025 75,00
DN 40 39 12 140 0040 90,00
DN 50 50 12 140 0050 120,00
KF-Bauteile nach DIN 28403 StandardmaßeComponents KF according to DIN 28403 standard dimensions
15Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
NennweiteNominal width
AbmessungenDimensionsA (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 250 151 1625 75,00
DN 16 500 151 1650 85,00
DN 16 750 151 1675 95,00
DN 16 1000 151 1610 105,00
DN 25 250 152 2525 100,00
DN 25 500 152 2550 110,00
DN 25 750 152 2575 122,00
DN 25 1000 152 2510 130,00
DN 40 250 153 4025 125,00
DN 40 500 153 4050 145,00
DN 40 750 153 4075 160,00
DN 40 1000 153 4010 180,00
DN 50 250 154 5025 165,00
DN 50 500 154 5050 195,00
DN 50 750 154 5075 220,00
DN 50 1000 154 5010 245,00
KF-Federungskörper, Edelstahl, hochflexibel, vakuumgeglühtBellow, stainless steel, high flexibility, vacuum annealed NennweiteNominal width
AbmessungenDimensionsA (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 60 142 1660 75,00
DN 16 120 143 1612 110,00
DN 25 60 142 2560 108,00
DN 25 120 143 2512 120,00
DN 40 120 143 4012 140,00
DN 50 120 143 5012 190,00
Ausführung mit Membranbalg auf Anfrage. Version with edge-welded bellow optional.
KF-Zwischenstück, EdelstahlIntermediate piece, stainless steelNennweiteNominal width
AbmessungenDimensionsA (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 80 145 1680 70,00
DN 25 100 145 2510 95,00
DN 40 130 145 4013 110,00
DN 50 140 145 5014 150,00
KF-Wellschlauch, Edelstahl, hochflexibel, vakuumgeglühtMetal hose, stainless steel, high flexibility, vacuum annealed
KF-
Bau
teil
e C
ompo
nent
s K
F
16 Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
NennweiteNominal width
AbmessungenDimensionsA (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 250 161 1625 65,00
DN 16 500 161 1650 75,00
DN 16 750 161 1675 80,00
DN 16 1000 161 1610 90,00
DN 25 250 162 2525 85,00
DN 25 500 162 2550 95,00
DN 25 750 162 2575 103,00
DN 25 1000 162 2510 112,00
DN 40 250 163 4025 105,00
DN 40 500 163 4050 122,00
DN 40 750 163 4075 138,00
DN 40 1000 163 4010 150,00
DN 50 250 164 5025 140,00
DN 50 500 164 5050 160,00
DN 50 750 164 5075 180,00
DN 50 1000 164 5010 200,00
KF-Wellschlauch, Edelstahl, normal flexibelMetal hose, stainless steel, normal flexibility
Metallschläuche, DN 40 KF und DN 16 KF,Länge 750 mm, super flexibelDurch unser besonderes Glühverfahren unter Vakuum werden die enormen
Spannungen, die bei der Kaltumformung von dünnwandigem Rohr zum Metallschlauch
entstehen, bei über 1.000 °C und anschließendem raschem Abkühlen eliminiert.
Metal hoses, DN 40 KF and DN 16 KF,length 750 mm, super flexibleDue to our special annealing process under vacuum, the tremendous tensions which
arise during the cold forming of thin-walled pipe into metal hose are eliminated at over
1,000 °C and subsequent quick cooling.
KF-Bauteile nach DIN 28403 StandardmaßeComponents KF according to DIN 28403 standard dimensions
ISO
-K-B
aute
ile
Com
pone
nts
ISO
-K
18 Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
ISO-K-Klammerflansche nach DIN 28404Clamping flanges ISO-K according to DIN 28404
Klammerflansch-Bauteile können entweder durch Klammer-
schrauben oder durch einen Überwurfflansch mit Sprengring
montiert werden. Der Übergang auf DIN-Flansche ist mit
Hilfe von speziellen Überwurfflanschen möglich.
Werkstoffe
Flansche: Edelstahl 1.4435
Federungskörper
und Wellschläuche: Edelstahl 1.4435
Überwurfflansche: Edelstahl und Stahl, verzinkt
Zentrierringe: Edelstahl und Aluminium
(andere Werkstoffe auf Anfrage)
FlanschverbindungsartenFlange connection types
NennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Anz. PratzenNo. of claws(St./pcs.)
SchraubenThread
DN 63 76 3 110 130 4 M 8
DN 100 108 3 145 165 8 M 8
DN 160 159 3 200 225 8 M 10
DN 200 219 3 260 285 12 M 10
DN 250 267 3 310 335 12 M 10
DN 320 326 4 395 425 12 M 12
DN 400 410 5 480 510 16 M 12
DN 500 511 5 580 610 16 M 12
DN 630 663 6 720 750 20 M 12
NennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
BohrungenBoreholes
DN 63 76 3 110 130 4 x Ø 9
DN 100 108 3 145 165 8 x Ø 9
DN 160 159 3 200 225 8 x Ø 11
DN 200 219 3 260 285 12 x Ø 11
DN 250 267 3 310 335 12 x Ø 11
DN 320 326 4 395 425 12 x Ø 14
DN 400 410 5 480 510 16 x Ø 14
DN 500 511 5 580 610 16 x Ø 14
DN 630 663 6 720 750 20 x Ø 14
Clamping flange components can be mounted by clip bolts
or by a collar flange with retaining ring. The transition to DIN
flanges is possible with special collar flanges.
Materials
Flanges: Stainless steel 1.4435
Metal bellows and
metal hoses: Stainless steel 1.4435
Collar flanges: Stainless steel and steel, galvanized
Centering rings: Stainless steel and aluminium
(other materials on request)
1 Klammerschraube Clamping bolt
2 Zentrierring mit O-Ring und Stützring Centering ring with O-ring and supporting ring
3 Klammerflansch mit Rohransatz Clamping flange with pipe socket
4 Sprengring Retaining ring
5 Überwurfflansch Collar flange
6 Spannpratze Clamping claw
7 Festflansch Fixed flange
19Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
ISO-K-Klammerflansch mit Rohransatz, EdelstahlClamping flange with pipe socket, stainless steelNennweiteNominal width
AbmessungenDimensionsA (mm)
Artikel-Nr.Order No.
PreisPrice
(€)B (mm) C (mm)
DN 63 50 76 3 200 0063 98,00
DN 100 50 108 3 200 0100 130,00
DN 160 50 159 3 200 0160 180,00
DN 200 50 219 3 200 0200 265,00
DN 250 50 267 3 200 0250 325,00
DN 63 100 76 3 201 0063 110,00
DN 100 100 108 3 201 0100 140,00
DN 160 100 159 3 201 0160 195,00
DN 200 100 219 3 201 0200 280,00
DN 250 100 267 3 201 0250 350,00
ISO-K-Anschweißflansch mit Schweißlippe, EdelstahlClamping flange with welding edge, stainless steelNennweiteNominal width
AbmessungenDimensionsA (mm)
Artikel-Nr.Order No.
PreisPrice
(€)B (mm)
DN 63 76,2 4 202 0063 65,00
DN 100 108,3 4 202 0100 87,00
DN 160 159,4 4 202 0160 120,00
DN 200 219,5 4 202 0200 195,00
DN 250 267,6 4 202 0250 250,00
ISO-K-Blindflansch, EdelstahlClamping blank flange, stainless steelNennweiteNominal width
AbmessungenDimensionsA (mm) C(mm) D(mm)
Artikel-Nr.Order No.
PreisPrice
(€)B (mm)
DN 63 95 91 12 70 203 0063 70,00
DN 100 130 125 12 102 203 0100 95,00
DN 160 180 175 12 153 203 0160 165,00
DN 200 240 235 12 213 203 0200 250,00
DN 250 290 285 12 261 203 0250 320,00
DN 320 370 365 17 318 203 0320 440,00
DN 400 450 445 17 400 203 0400 550,00
DN 500 550 545 17 501 203 0500 830,00
DN 630 690 685 22 651 203 0630 1.350,00
ISO
-K-B
aute
ile
Com
pone
nts
ISO
-K
20 Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
ISO-K-Klammerflansche nach DIN 28404Clamping flanges ISO-K according to DIN 28404
NennweiteNominal width
AbmessungenDimensionsA (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)B (mm)
Perbunan
DN 63 70 68 3,9 8 205 0063 45,00
DN 100 102 100 3,9 8 205 0100 60,00
DN 160 153 149 3,9 8 205 0160 98,00
DN 200 213 208 3,9 8 205 0200 140,00
DN 250 261 255 3,9 8 205 0250 175,00
Viton
DN 63 70 68 3,9 8 206 0063 52,00
DN 100 102 100 3,9 8 206 0100 68,00
DN 160 153 149 3,9 8 206 0160 110,00
DN 200 213 208 3,9 8 206 0200 155,00
DN 250 261 255 3,9 8 206 0250 195,00
Zentrierring mit Außenring, EdelstahlCentering ring with outer ring, stainless steel
Zentrierring mit Außenring, AluminiumCentering ring with outer ring, aluminiumNennweiteNominal width
AbmessungenDimensionsA (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)B (mm)
Perbunan
DN 63 70 68 3,9 8 207 0063 30,00
DN 100 102 100 3,9 8 207 0100 35,00
DN 160 153 149 3,9 8 207 0160 38,00
DN 200 213 208 3,9 8 207 0200 55,00
DN 250 261 255 3,9 8 207 0250 68,00
Viton
DN 63 70 68 3,9 8 208 0063 35,00
DN 100 102 100 3,9 8 208 0100 38,00
DN 160 153 149 3,9 8 208 0160 43,00
DN 200 213 208 3,9 8 208 0200 65,00
DN 250 261 255 3,9 8 208 0250 80,00
Ersatz-Rund-DichtringSpare O-ring for centering ringNennweiteNominal width
AbmessungenDimensionsA (mm)
Artikel-Nr.Order No.
PreisPrice
(€)B (mm)
Perbunan
DN 63 75,6 5,33 209 0063 3,00
DN 100 107,2 5,33 209 0100 3,00
DN 160 151,8 5,33 209 0160 4,00
DN 200 208,9 5,33 209 0200 5,00
DN 250 253,4 5,33 209 0250 8,00
Viton
DN 63 75,6 5,33 210 0063 5,00
DN 100 107,2 5,33 210 0100 7,50
DN 160 151,8 5,33 210 0160 10,00
DN 200 208,9 5,33 210 0200 15,00
DN 250 253,4 5,33 210 0250 20,00
21Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
Überwurfflansch mit Sprengring, EdelstahlCollar flange with retaining ring, stainless steelNennweiteNominal width
AbmessungenDimensionsA (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)B (mm)
DN 63 130 95,5 110 12 215 0063 75,00
DN 100 165 130,5 145 12 215 0100 98,00
DN 160 225 180,5 200 16 215 0160 145,00
DN 200 285 240,5 260 16 215 0200 230,00
DN 250 335 290,5 310 16 215 0250 295,00
Ersatz-Sprengring, EdelstahlSpare retaining ring, stainless steelNennweiteNominal width
AbmessungenDimensionsA (mm)
Artikel-Nr.Order No.
PreisPrice
(€)B (mm)
DN 63 92 3 217 0063 6,00
DN 100 127 3 217 0100 7,00
DN 160 177 5 217 0160 8,00
DN 200 237 5 217 0200 9,00
DN 250 287 5 217 0250 12,00
Klammerschraube, EdelstahlClamping bolt, stainless steelNennweiteNominal width
AbmessungenDimensionsA (mm) C (mm)
Artikel-Nr.Order No.
PreisPrice
(€)B (mm)
DN 63-250 60 M 10 20-32 218 6325 12,00
DN 320-630 82 M 12 30-52 218 3250 15,00
Klammerschraube, AluminiumClamping bolt, aluminiumNennweiteNominal width
AbmessungenDimensionsA (mm)
Artikel-Nr.Order No.
PreisPrice
(€)B (mm)
DN 63-100 60 M 8 218 6310 8,00
DN 160-250 60 M 10 218 1625 10,00
DN 320-500 70 M 12 218 3200 12,00
ISO
-K-B
aute
ile
Com
pone
nts
ISO
-K
22 Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
ISO-K-Klammerflansche nach DIN 28404Clamping flanges ISO-K according to DIN 28404
Spannpratze, Edelstahl,zum Verbinden von Festflanschen mit KlammerflanschenClamping claw, stainless steelfor the connection of fixed flanges to clamping flangesNennweiteNominal width
AbmessungenDimensionsA (mm) C (mm)
Artikel-Nr.Order No.
PreisPrice
(€)B (mm)
DN 63-100 20 M 8 30 219 6310 8,00
DN 160-250 25 M 10 35 219 1625 9,00
DN 320 30 M 12 40 219 0320 10,00
DN 400-500 30 M 12 40 219 4050 11,00
DN 630 35 M 12 50 219 0630 12,00
Spannpratze, AluminiumClamping claw, aluminiumNennweiteNominal width
AbmessungenDimensionsA (mm) C (mm)
Artikel-Nr.Order No.
PreisPrice
(€)B (mm)
DN 63-100 20 M 8 28 219 0010 5,00
DN 160-250 25 M 10 35 219 0025 6,00
DN 320 30 M 12 40 219 0032 8,00
DN 400-500 30 M 12 40 219 0050 9,00
DN 630 35 M 12 50 219 0063 11,00
EdelstahlrohrStainless steel pipeNennweiteNominal width
AbmessungenDimensionsA (mm) C (mm)
Artikel-Nr.Order No.
Preis/MeterPrice/meter
(€)B (mm)
DN 63 76 3 * 220 0063 110,00
DN 100 108 3 * 220 0100 180,00
DN 160 159 3 * 220 0160 230,00
DN 200 219 3 * 220 0200 340,00
DN 250 267 3 * 220 0250 450,00
* Länge nach Kundenspezifikation. * Length at customer's specification.
Schauglas mit Überwurfflansch, Aluminium,und Dichtring, VitonViewport with collar flange, aluminiumand gasket, VitonNennweiteNominal width
AbmessungenDimensionsA (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 63 70 22 130 221 0063 300,00
DN 100 102 22 165 221 0100 380,00
DN 160 153 22 225 221 0160 450,00
23Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
ISO-K-Klammerflansch-Rohrwinkel 90°, EdelstahlClamping flange, elbow 90°, stainless steelNennweiteNominal width
AbmessungenDimensionsA (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 63 88 225 0063 190,00
DN 100 108 225 0100 295,00
DN 160 138 225 0160 640,00
DN 200 178 225 0200 960,00
DN 250 208 225 0250 1.250,00
ISO-K-Klammerflansch-T-Stück, EdelstahlClamping flange, T-piece, stainless steelNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 63 88 176 226 0063 325,00
DN 100 108 216 226 0100 435,00
DN 160 138 276 226 0160 870,00
DN 200 178 356 226 0200 1.200,00
DN 250 208 416 226 0250 1.560,00
ISO-K-Klammerflansch-Kreuzstück, EdelstahlClamping flange, 4-way cross, stainless steelNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 63 88 176 227 0063 480,00
DN 100 108 216 227 0100 650,00
DN 160 138 276 227 0160 1.200,00
DN 200 178 356 227 0200 1.750,00
DN 250 208 416 227 0250 2.200,00
ISO-K-Doppelkreuzstück, EdelstahlClamping flange, 6-way cross, stainless steelNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm)
Artikel-Nr.Order No.
PreisPrice
(€)C (mm)
DN 63 88 176 106 228 0063 900,00
DN 100 108 216 162 228 0100 1.250,00
DN 160 138 276 232 228 0160 1.880,00
DN 200 178 356 – 228 0200 2.600,00
DN 250 208 416 – 228 0250 3.200,00
ISO
-K-B
aute
ile
Com
pone
nts
ISO
-K
24 Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
ISO-K-Klammerflansche nach DIN 28404Clamping flanges ISO-K according to DIN 28404
ISO-K-Klammerflansch-Meßstück, EdelstahlClamping flange, measurement cross piece, stainless steelNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 63 88 44 60 60 229 0063 400,00
DN 100 108 54 75 75 229 0100 500,00
DN 160 138 69 100 100 229 0160 600,00
ISO-K-Klammerflansch-Reduzierstück, EdelstahlClamping flange, reducing piece, stainless steelNennweiteNominal width
AbmessungenDimensionsA (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 100 ⁄ 63 50 230 1063 270,00
DN 160 ⁄ 63 50 230 1663 350,00
DN 160 ⁄ 100 50 230 1610 400,00
DN 200 ⁄ 63 50 230 2063 450,00
DN 200 ⁄ 100 50 230 2010 500,00
DN 200 ⁄ 160 100 230 2016 600,00
DN 250 ⁄ 63 50 230 2563 500,00
DN 250 ⁄ 100 50 230 2510 550,00
DN 250 ⁄ 160 100 230 2516 650,00
DN 250 ⁄ 200 100 230 2520 750,00
Reduzier-Übergangsflansch ISO-K / ISO-K, EdelstahlAdapter flange ISO-K / ISO-K, stainless steelNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 160 ⁄ 63 4xM 8 110 70 22 231 1663 400,00
DN 160 ⁄ 100 8xM 8 145 102 22 231 1610 450,00
DN 200 ⁄ 63 4xM 8 110 70 22 231 2063 550,00
DN 200 ⁄ 100 8xM 8 145 102 22 231 2010 600,00
DN 250 ⁄ 63 4xM 8 110 70 22 231 2563 700,00
DN 250 ⁄ 100 8xM 8 145 102 22 231 2510 750,00
DN 250 ⁄ 160 8xM10 200 153 22 231 2516 800,00
25Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
ISO-K-Klammerflansch-Federungskörper, Edelstahl, normalflexibelClamping flange, flexible bellow,stainless steel, normal flexibilityNennweiteNominal width
AbmessungenDimensionsA (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 63 130 232 0063 280,00
DN 100 130 232 0100 400,00
DN 160 200 232 0160 650,00
DN 200 250 232 0200 930,00
DN 250 250 232 0250 1.200,00
ISO-K-Klammerflansch-Federungskörper, Edelstahl,hochflexibel, vakuumgeglühtClamping flange, flexible bellow, stainless steel,high flexibility, vacuum annealedNennweiteNominal width
AbmessungenDimensionsA (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 63 130 233 0063 300,00
DN 100 130 233 0100 430,00
DN 160 200 233 0160 700,00
DN 200 250 233 0200 1.000,00
DN 250 250 233 0250 1.300,00
ISO-K-Klammerflansch-Wellschlauch, Edelstahl, normalflexibelClamping flange, metal hose, stainless steel, normal flexibilityNennweiteNominal width
AbmessungenDimensionsA (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 63 250 240 6325 300,00
DN 63 500 240 6350 350,00
DN 63 750 240 6375 380,00
DN 63 1000 240 6310 400,00
DN 100 250 241 1025 440,00
DN 100 500 241 1050 530,00
DN 100 750 241 1075 590,00
DN 100 1000 241 1010 640,00
DN 160 250 242 1625 650,00
DN 160 500 242 1650 700,00
DN 160 750 242 1675 750,00
DN 160 1000 242 1610 800,00
ISO
-K-B
aute
ile
Com
pone
nts
ISO
-K
26 Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
ISO-K-Klammerflansche nach DIN 28404Clamping flanges ISO-K according to DIN 28404
ISO-K-Klammerflansch-Wellschlauch, Edelstahl,hochflexibel, vakuumgeglühtClamping flange, metal hose, stainless steel,high flexibility, vacuum annealedNennweiteNominal width
AbmessungenDimensionsA (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 63 250 245 6325 330,00
DN 63 500 245 6350 380,00
DN 63 750 245 6375 440,00
DN 63 1000 245 6310 470,00
DN 100 250 246 1025 490,00
DN 100 500 246 1050 570,00
DN 100 750 246 1075 630,00
DN 100 1000 246 1010 680,00
DN 160 250 247 1625 700,00
DN 160 500 247 1650 750,00
DN 160 750 247 1675 800,00
DN 160 1000 247 1610 900,00
CF-
/ CO
F-B
aute
ile
Com
pone
nts
CF
/ CO
F
28 Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
CF-Bauteile nach ISO / TS 3669-2Components CF according to ISO / TS 3669-2
Die in diesem Katalog abgebildeten CF-Flansche
(Conflat®-Flansche) entsprechen der Technischen
Spezifikation ISO / TS 3669-2 Werkstoffauswahl und Behandlung sowie geeignete Füge-
verfahren garantieren eine kleinstmögliche Gasabgabe erreichbares Endvakuum 10-12 mbar ausheizbar bis 300 °C Standard-Werkstoff für die Flansche 1.4435 oder adäquat,
je nach Verfügbarkeit oder Anfrage Standard-Werkstoff für die Rohre 1.4435 oder adäquat Permeabilität der Standard-Flansche µrel ≤ 1.05 UHV-Flansche bis Nennweite DN 1000 UHV-Bauteile mit Flanschen aus Schmiedeteilen ⁄
Werkstoff 1.4429 ESU lieferbar Wasserstoffarmglühen möglich Bauteile UHV-gerecht gereinigt Bauteile Helium-leckgetestet Bauteile mit abgesenkten Werten der magnetischen
Permeabilität µrel auf Anfrage
Dichtungsprinzip
Mit leichtem Spiel fügt sich ein Kupfer-Flachring in die Flanschaus-
drehung ein und zentriert dabei die Flanschpaare. Die Flansch-
schneiden verformen nach Anzug der Schrauben den Dichtring nicht
nur axial sondern auch radial nach außen. Dadurch ist ein „Fließen”
auch bei den relativ hohen Ausheiztemperaturen nicht möglich.
Sealing principle
A copper gasket fits properly into the flange bore and centers the
flange pairs thereby. After the screw tightening, the flange edges
shape the seal ring not only axially but also radially outwards. This
prevents ”creeping” even at relatively high bake-out temperatures.
Nennweite
Nominalwidth
D
D
("/inch)
D
D
(mm)
Lkr Ø
Lkr dia.
(mm)
BohrungenAnzahl/ØBoresnumber/dia.
Innenmaß
Inner dimension(mm)
Anzugs-moment
Tighteningtorque
(Nm)
DN 16 CF 1 1/3" 33,8 27,0 6 x Ø 4,3 16 4
DN 40 CF 2 ¾" 69,9 58,7 6 x Ø 6,4 38 10
DN 63 CF 4 ½" 114,3 92,2 8 x Ø 8,5 66 20
DN 100 CF 6" 152,4 130,3 16 x Ø 8,5 100 20
DN 160 CF 8" 203,2 181,0 20 x Ø 8,5 150 20
DN 200 CF 10" 254,0 231,8 24 x Ø 8,5 200 20
DN 250 CF 12" 304,8 284,0 32 x Ø 8,5 250 20
The flanges CF shown in this catalogue correspond with
the technical specification ISO / TS 3669-2 Material selection and treatment as well as suitable joining
process guarantee smallest possible gas release Attainable end vacuum 10-12 mbar Bakable up to 300°C Standard material for the flanges 1.4435 or adequate,
depending on current availability or request Standard material for the pipes 1.4435 or adequate Permeability of the standard flanges µrel ≤ 1.05 UHV flanges up to nominal width DN 1000 UHV components deliverable with flanges made
of forged parts ⁄ material 1.4429 ESU Low hydrogen annealing possible Components cleaned suitably for UHV Components helium leak tested Components with lowered magnetic permeability
values µrel on request
29Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
CF-Blindflansch, festBlank flange, non-rotatableNennweiteNominal width
AbmessungenDimensionsA (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 7,3 300 0016 20,00
DN 40 13,0 300 0040 30,00
DN 63 17,5 300 0063 70,00
DN 100 20,0 300 0100 100,00
DN 160 22,0 300 0160 150,00
DN 200 24,5 300 0200 290,00
DN 250 26,0 300 0250 450,00
CF-Blindflansch, drehbar Blank flange, rotatableNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 7,3 5,8 19,0 301 0016 22,00
DN 40 13,0 7,6 41,5 301 0040 35,00
DN 63 19,0 12,7 71,0 301 0063 80,00
DN 100 21,5 14,3 105,0 301 0100 120,00
DN 160 24,0 15,8 155,0 301 0160 200,00
DN 200 24,5 17,1 208,0 301 0200 350,00
DN 250 26,0 18,0 258,0 301 0250 580,00
CF-Anschweißflansch, fest Welding flange, non-rotatableNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 7,3 4,0 18,2 16 302 0016 20,00
DN 40 13,0 5,0 41,3 38 302 0038 30,00
DN 63 17,5 10,0 70,5 66 302 0063 70,00
DN 100 20,0 10,0 104,5 100 302 0100 100,00
DN 160 22,0 10,0 154,5 150 302 0160 150,00
DN 200 24,5 12,0 206,5 200 302 0200 290,00
DN 250 26,0 12,0 256,5 250 302 0250 450,00
CF-Anschweißflansch, drehbar Welding flange, rotatableNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 7,3 4,0 18,2 16 303 0016 25,00
DN 40 13,0 5,0 41,3 38 303 0038 35,00
DN 63 19,0 10,0 70,5 66 303 0063 80,00
DN 100 21,5 10,0 104,5 100 303 0100 120,00
DN 160 24,0 10,0 154,5 150 303 0160 200,00
DN 200 24,5 12,0 206,5 200 303 0200 380,00
DN 250 26,0 12,0 256,5 250 303 0250 600,00
CF-
/ CO
F-B
aute
ile
Com
pone
nts
CF
/ CO
F
30 Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
CF-Bauteile nach ISO / TS 3669-2Components CF according to ISO / TS 3669-2
CF-Anschweißflansch, fest, mit Gewindelöchern Welding flange, non-rotatable, with tapped bolt holesNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 7,3 4,0 18,2 M 4 304 0016 25,00
DN 40 13,0 5,0 41,3 M 6 304 0038 35,00
DN 63 17,5 10,0 70,5 M 8 304 0063 80,00
DN 100 20,0 10,0 104,5 M 8 304 0100 110,00
DN 160 22,0 10,0 154,5 M 8 304 0160 165,00
DN 200 24,5 12,0 206,5 M 8 304 0200 350,00
DN 250 26,0 12,0 256,5 M 8 304 0250 550,00
CF-Anschweißflansch, drehbar, mit Gewindelöchern Welding flange, rotatable, with tapped bolt holesNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 7,3 4,0 18,2 M 4 305 0016 30,00
DN 40 13,0 5,0 41,3 M 6 305 0038 42,00
DN 63 19,0 10,0 70,5 M 8 305 0063 100,00
DN 100 21,5 10,0 104,5 M 8 305 0100 140,00
DN 160 24,0 10,0 154,5 M 8 305 0160 200,00
DN 200 24,5 12,0 206,5 M 8 305 0200 400,00
DN 250 26,0 12,0 256,5 M 8 305 0250 650,00
CF-EinschweißflanschWeld-in flangeNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
Preis/Price
(€)
DN 16 16,0 34,0 10,0 M 4 306 0016 70,00
DN 40 20,0 70,0 12,0 M 6 306 0038 90,00
DN 63 24,0 114,0 16,0 M 8 306 0063 180,00
DN 100 24,0 152,0 16,0 M 8 306 0100 275,00
DN 160 28,0 203,0 18,0 M 8 306 0160 380,00
DN 200 28,0 253,0 18,0 M 8 306 0200 500,00
Größere Nennweiten und doppelseitige Einschweißflansche auf Anfrage.
Larger dimensions und double-sided flanges optional.
31Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
CF-Anschweißflansch, fest, mit Rohrstutzen Welding flange, non rotatable, with pipe socket NennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 7,3 12,0 18,0 1,0 307 1612 50,00
DN 16 7,3 30,0 18,0 1,0 307 1630 60,00
DN 40 13,0 40,0 41,0 1,5 307 0038 70,00
DN 63 17,5 50,0 70,0 2,0 307 0063 130,00
DN 100 20,0 60,0 104,0 2,0 307 0100 180,00
DN 160 22,0 70,0 154,0 2,0 307 0160 290,00
CF-Anschweißflansch, drehbar, mit Rohrstutzen Welding flange, rotatable, with pipe socket NennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 7,3 12,0 18,0 1,0 308 1612 55,00
DN 16 7,3 30,0 18,0 1,0 308 1630 65,00
DN 40 13,0 40,0 41,0 1,5 308 0038 80,00
DN 63 19,0 50,0 70,0 2,0 308 0063 160,00
DN 100 21,5 60,0 104,0 2,0 308 0100 230,00
DN 160 24,0 70,0 154,0 2,0 308 0160 320,00
CF-Zwischenstück, 1 Flansch drehbarIntermediate piece, 1 flange rotatableNennweiteNominal width
AbmessungenDimensionsA (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 38 310 0016 120,00
DN 40 63 310 0038 130,00
DN 63 105 310 0063 280,00
DN 100 135 310 0100 360,00
DN 160 167 310 0160 550,00
DN 200 210 310 0200 950,00
DN 250 225 310 0250 1.400,00C
F- / C
OF-
Bau
teil
e C
ompo
nent
s C
F / C
OF
32 Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
CF-RohrbauteilePipe components CF
Nennweiten DN 16 CF - DN 63 CF mit gleichen Rohr-
querschnitten, von außen durchgeschweißt, Flansche
innen geschweißt.
Nennweiten DN 100 CF - DN 250 CF, Verwendung von
Kugelkörpern, alle Schweißnähte von innen geschweißt.
Oberflächen innen und außen glasperlenfeingestrahlt,
außer Dichtflächen.
Bauteile mit abgesenkten Werten der Permeabilität µrel
auf Anfrage.
Nominal widths DN 16 CF - DN 63 CF same pipe cross-
sections, welded with full penetration from the outside,
flanges welded inside.
Nominal dimensions DN 100 CF - DN 250 CF, use of
spheres, all welded seams are welded from the inside.
Surfaces glass bead blasted with glass beads on the inside
and outside, except sealing faces.
Components with lowered permeability values µrel
on request.
CF-Winkelstück, 1 Flansch drehbarElbow 90°, 1 flange rotatableNennweiteNominal width
AbmessungenDimensionsA (mm) C (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 38 – 311 0016 140,00
DN 40 63 – 311 0040 190,00
DN 63 105 106 311 0063 380,00
DN 100 135 162 311 0100 540,00
DN 160 167 232 311 0160 750,00
DN 200 210 307 311 0200 1.500,00
DN 250 225 405 311 0250 2.100,00
CF-T-Stück, 2 Flansche drehbarT-piece, 2 flanges rotatableNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 38 76 – 312 0016 200,00
DN 40 63 126 – 312 0040 270,00
DN 63 105 210 106 312 0063 500,00
DN 100 135 270 162 312 0100 700,00
DN 160 167 334 232 312 0160 1.060,00
DN 200 210 420 307 312 0200 1.900,00
DN 250 225 450 405 312 0250 2.700,00
CF-Kreuzstück, 2 Flansche drehbar4-way cross, 2 flanges rotatableNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 38 76 – 313 0016 250,00
DN 40 63 126 – 313 0040 340,00
DN 63 105 210 106 313 0063 620,00
DN 100 135 270 162 313 0100 950,00
DN 160 167 334 232 313 0160 1.450,00
DN 200 210 420 307 313 0200 3.000,00
DN 250 225 450 405 313 0250 3.700,00
33Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
CF-Doppel-Kreuzstück, 3 Flansche drehbar6-way cross, 3 flanges rotatableNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 38 76 – 314 0016 500,00
DN 40 63 126 85 314 0040 670,00
DN 63 105 210 106 314 0063 1.300,00
DN 100 135 270 162 314 0100 1.850,00
DN 160 167 334 232 314 0160 2.700,00
DN 200 210 420 307 314 0200 4.000,00
DN 250 225 450 405 314 0250 6.300,00
CF-ReduzierflanschReducing flangeNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 40 / 16 20 12 M 4 320 4016 100,00
DN 63 / 16 24 16 M 4 320 6316 150,00
DN 63 / 40 24 12 M 6 320 6340 150,00
DN 100 / 40 24 16 M 6 320 1040 200,00
DN 100 / 63 24 12 M 8 320 1063 220,00
DN 160 / 40 24 16 M 6 320 1640 300,00
DN 160 / 63 24 16 M 8 320 1663 330,00
DN 160 / 100 24 16 M 8 320 1610 350,00
DN 200 / 40 24 16 M 6 320 2040 500,00
DN 200 / 63 24 16 M 8 320 2063 520,00
DN 200 / 100 24 16 M 8 320 2010 550,00
DN 200 / 160 24 16 M 8 320 2016 550,00
DN 250 / 40 26 16 M 6 320 2540 575,00
DN 250 / 63 26 16 M 8 320 2563 600,00
DN 250 / 100 26 16 M 8 320 2510 620,00
DN 250 / 160 26 16 M 8 320 2516 680,00
DN 250 / 200 26 16 M 8 320 2520 750,00
Andere Ausführungen, z.B. mit
mehreren Reduzierungen, auf
Anfrage.
Other versions optional,
e.g. multiple reductions on
request.
CF-Reduzierstück, 1 Flansch drehbarReducing piece, 1 flange rotatableNennweiteNominal width
AbmessungenDimensionsA (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 40 / 16 50 321 4016 150,00
DN 63 / 16 60 321 6316 200,00
DN 63 / 40 75 321 6340 240,00
DN 100 / 40 95 321 1040 290,00
DN 100 / 63 95 321 1063 360,00
DN 160 / 40 120 321 1640 380,00
DN 160 / 63 120 321 1663 450,00
DN 160 / 100 120 321 1610 500,00
DN 200 / 63 120 321 2063 560,00
DN 200 / 100 120 321 2010 650,00
DN 200 / 160 120 321 2016 780,00
DN 250 / 100 120 321 2510 890,00
CF-
/ CO
F-B
aute
ile
Com
pone
nts
CF
/ CO
F
34 Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
CF-RohrbauteilePipe components CF
Übergangs-Reduzierstück CF / KFAdapter piece CF / KFNennweiteNominal width
AbmessungenDimensionsA (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 / 16 35 322 1616 90,00
DN 40 / 16 35 322 4016 100,00
DN 40 / 25 35 322 4025 110,00
DN 40 / 40 50 322 4040 120,00
DN 63 / 25 40 322 6325 160,00
DN 63 / 40 45 322 6340 180,00
DN 63 / 50 45 322 6350 205,00
DN 100 / 25 50 322 1025 220,00
DN 100 / 40 55 322 1040 240,00
DN 100 / 50 55 322 1050 275,00
Übergangs-Reduzierstück CF / ISO-KAdapter piece CF / ISO-KNennweiteNominal width
AbmessungenDimensionsA (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 63 / 63 60 323 6363 230,00
DN 100 / 63 60 323 1063 300,00
DN 100 / 100 110 323 1010 350,00
DN 160 / 63 110 323 1663 400,00
DN 160 / 100 110 323 1610 500,00
DN 160 / 160 110 323 1616 550,00
CF-Meßflansch, Zwischenflansch mit Gewinde,1 seitlicher Rohrstutzen DN 16 CFDouble sided flange, with lateral pipe socket DN 16 CF, with tapped bolt holesNennweiteNominal width
AbmessungenDimensionsA (mm)
Artikel-Nr.Order No.
PreisPrice
(€)B (mm) C (mm) D (mm)
DN 63 28 90 66 16 326 0063 400,00
DN 100 28 110 100 12 326 0100 500,00
DN 160 28 135 150 12 326 0160 650,00
CF-Zwischenstück, mit 2 seitlichen Flanschanschlüssen DN 40 CFIntermediate piece, with 2 lateral flanges DN 40 CF NennweiteNominal width
AbmessungenDimensionsA (mm)
Artikel-Nr.Order No.
PreisPrice
(€)B (mm) C (mm)
DN 63 / 40 / 40 215 135 67,5 327 0063 600,00
DN 100 / 40 / 40 250 135 67,5 327 0100 650,00
DN 160 / 40 / 40 300 167 83,5 327 0160 900,00
3 Flansche drehbar. 3 flanges rotatable.
35Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
NennweiteNominal width
AbmessungenDimensionsA (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 250 330 1625 190,00
DN 16 500 330 1650 220,00
DN 16 750 330 1675 250,00
DN 16 1000 330 1610 280,00
DN 40 250 331 4025 280,00
DN 40 500 331 4050 315,00
DN 40 750 331 4075 360,00
DN 40 1000 331 4010 390,00
DN 63 250 332 6325 450,00
DN 63 500 332 6350 500,00
DN 63 750 332 6375 540,00
DN 63 1000 332 6310 580,00
DN 100 250 333 1025 600,00
DN 100 500 333 1050 650,00
DN 100 750 333 1075 700,00
DN 100 1000 333 1010 780,00
NennweiteNominal width
AbmessungenDimensionsA (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 250 335 1625 170,00
DN 16 500 335 1650 200,00
DN 16 750 335 1675 220,00
DN 16 1000 335 1610 250,00
DN 40 250 336 4025 250,00
DN 40 500 336 4050 300,00
DN 40 750 336 4075 320,00
DN 40 1000 336 4010 340,00
DN 63 250 337 6325 410,00
DN 63 500 337 6350 435,00
DN 63 750 337 6375 470,00
DN 63 1000 337 6310 520,00
DN 100 250 338 1025 530,00
DN 100 500 338 1050 560,00
DN 100 750 338 1075 600,00
DN 100 1000 338 1010 650,00
DN 160 250 339 1625 800,00
DN 160 500 339 1650 880,00
DN 160 750 339 1675 960,00
DN 160 1000 339 1610 1.050,00
CF-Wellschlauch, 1 Flansch drehbar, hochflexibel, vakuumgeglühtMetal hose, 1 flange rotatable,high flexibility, vacuum annealed
CF-Wellschlauch, 1 Flansch drehbar, normalflexibelMetal hose, 1 flange rotatable, normal flexibility
CF-
/ CO
F-B
aute
ile
Com
pone
nts
CF
/ CO
F
36 Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
CF-RohrbauteilePipe components CF
CF-Federungskörper, 1 Flansch drehbar,hochflexibel, vakuumgeglühtFlexible bellow, 1 flange rotatable, high flexibility, vacuum annealedNennweiteNominal width
AbmessungenDimensionsA (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 110 340 0016 180,00
DN 40 160 340 0040 230,00
DN 63 250 340 0063 390,00
DN 100 250 340 0100 490,00
DN 160 270 340 0160 850,00
DN 200 300 340 0200 1.300,00
DN 250 320 340 0250 1.850,00
CF-Federungskörper, 1 Flansch drehbar, normalflexibelFlexible bellow, 1 flange rotatable, normal flexibilityNennweiteNominal width
AbmessungenDimensionsA (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 110 341 0016 180,00
DN 40 160 341 0040 220,00
DN 63 250 341 0063 370,00
DN 100 250 341 0100 460,00
DN 160 270 341 0160 780,00
DN 200 300 341 0200 1.180,00
DN 250 320 341 0250 1.720,00
CF-Membranbalg, 1 Flansch drehbarEdge welded bellow, 1 flange rotatableNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 87 102 16 342 0016 500,00
DN 40 130 155 35 342 0040 550,00
DN 63 170 200 64 342 0063 700,00
DN 100 190 220 100 342 0100 1.000,00
DN 160 204 244 150 342 0160 1.250,00
DN 200 * * * 342 0200 *
DN 250 * * * 342 0250 *
* Nach Spezifikation. * Other dimensions and versions optional.
37Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
CF-Membranbalg mit Justierstück, 1 Flansch drehbarEdge welded bellow with adjustment piece, 1 flange rotatableNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 40 130 155 35 343 0040 1.000,00
DN 63 170 200 64 343 0063 1.250,00
DN 100 190 220 100 343 0100 1.850,00
CF-Sichtfenster, Borosilikatglas (7056)Viewport, borosilicate glass (7056)NennweiteNominal width
AbmessungenDimensionsB (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 15,9 345 0016 180,00
DN 40 35,0 345 0040 230,00
DN 63 68,0 345 0063 430,00
DN 100 98,0 345 0100 650,00
DN 160 136,0 345 0160 1.050,00
CF-Zwischenstück, KeramikIntermediate piece, ceramicsNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 40 25 30 78 348 0040 600,00
DN 63 45 40 113 348 0063 930,00
DN 100 85 60 121 348 0100 1.350,00
DN 160 144 90 160 348 0160 *
* Auf Anfrage. * On request.
CF-Kupfer-Dichtungen, (OFHC-Cu), 10 StückCopper gaskets, set of 10NennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 21,3 16,2 2 350 0016 20,00
DN 40 48,1 36,8 2 350 0040 25,00
DN 63 82,4 63,6 2 350 0063 40,00
DN 100 120,5 101,7 2 350 0100 55,00
DN 160 171,2 152,5 2 350 0160 105,00
DN 200 222,0 203,3 2 350 0200 200,00
DN 250 273,0 254,0 2 350 0250 350,00
* Vakuumgeglühte Kupferdichtungen auf Anfrage.
* Copper gaskets, vacuum annealed, on request.
CF-
/ CO
F-B
aute
ile
Com
pone
nts
CF
/ CO
F
38 Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
CF-RohrbauteilePipe components CF
CF-Stiftschraubensatz, Edelstahl, 25 StückStud screws, nuts and washers, stainless steel, set of 25NennweiteNominal width
AbmessungenDimensionsA (mm) B (mm)
Erforderliche Anz. pro FlanschverbindungNecessary number per flange connectionStück / pcs.
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 16 M 4 6 357 0016 40,00
DN 40 20 M 6 6 357 0040 50,00
DN 63 30 M 8 8 357 0063 60,00
DN 100 30 M 8 16 357 0100 65,00
DN 160 35 M 8 20 357 0160 70,00
Hochtemperatur-Schmiermittel, für Schrauben High-temperature lubricant, for screwsKonfektionierungPacking
InhaltContent(g)
TemperaturbeständigkeitTemperature resistance(°C)
Artikel-Nr.Order No.
PreisPrice
(€)
Tube 50 600 359 0000 25,00
CF-Schraubensatz, Edelstahl, 25 StückScrews, nuts and washers, stainless steel, set of 25NennweiteNominal width
AbmessungenDimensionsA (mm) B (mm)
Erforderliche Anz. pro FlanschverbindungNecessary number per flange connectionStück / pcs.
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 20 M 4 6 355 0016 20,00
DN 40 35 M 6 6 355 0040 22,00
DN 63 50 M 8 8 355 0063 23,00
DN 100 55 M 8 16 355 0100 25,00
DN 160 60 M 8 20 355 0160 27,00
DN 200 60 M 8 24 355 0200 30,00
DN 250 65 M 8 32 355 0250 32,00
39Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
COF-BauteileComponents COF
• Das Prinzip der COF-Dichtung besteht darin, dass ein Ring
aus Cu (OFHC) zwischen zwei Flanschen mit unterschied-
lichem Profil („male” und „female”) fest eingepresst wird.
• Die Dichtung passt sich den nach innen angeschrägten
Dichtflächen an, wodurch das Dichtmaterial auch bei
hohen Ausheiztemperaturen nicht fließen kann.
• COF-Bauteile sind nicht genormt. Nachstehend finden Sie
eine Auswahl gängiger Baugrößen. Alle Zwischengrößen
sind herstellbar, auch als Gegenflansch zu den bereits
vorhandenen.
Prinzip der COF-Dichtung
Principle of the COF seal
Von PINK entwickelte Kugelkammer zur Durchführung
photoelektronischer Spektroskopie bei Bessy II, Berlin.
With this chamber, designed by PINK, multi-coincidence
photoelectron spectroscopy of free atoms and molecules
is performed at Bessy II, Berlin.
• The principle of the COF seal is based on pressing a
Cu ring (OFHC) tightly between two flanges with different
profiles (“male“ and “female“).
• The seal adapts to the inner beveled sealing faces which
prevents the sealing material from creeping even at
high bake-out temperatures.
• COF components are not standardized. In this chapter you
will find a selection of common manufactured sizes.
All intermediate sizes can be manufactured, also as
counter flange for existing ones.
CF-
/ CO
F-B
aute
ile
Com
pone
nts
CF
/ CO
F
40 Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
COF-BauteileComponents COF
COF-Blindflansch „male“, EdelstahlBlank flange, ”male”, stainless steelNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 250 28,5 314 288,3 390 0250 950,00
DN 300 28,5 371 345,4 390 0300 1.300,00
DN 350 28,5 438 399,0 390 0350 1.800,00
DN 400 33,0 497 454,0 390 0400 2.200,00
DN 450 38,0 562 513,1 390 0450 2.600,00
DN 500 40,0 605 560,0 390 0500 3.200,00
DN 600 45,0 690 655,0 390 0600 4.000,00
DN 800 50,0 900 865,0 390 0800 5.500,00
DN 1000 55,0 1100 1065,0 390 1000 7.500,00
Ab DN 400 mit Klöpper- oder Flachboden.
Torospherical or flat bottom for DN 400 and larger.
COF-Blindflansch „female”, EdelstahlBlank flange, ”female”, stainless steelNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 250 28,5 314 288,3 391 0250 950,00
DN 300 28,5 371 345,4 391 0300 1.300,00
DN 350 28,5 438 399,0 391 0350 1.800,00
DN 400 33,0 497 454,0 391 0400 2.200,00
DN 450 38,0 562 513,1 391 0450 2.600,00
DN 500 40,0 605 560,0 391 0500 3.200,00
DN 600 45,0 690 655,0 391 0600 4.000,00
DN 800 50,0 900 865,0 391 0800 5.500,00
DN 1000 55,0 1100 1065,0 391 1000 7.500,00
Ab DN 400 mit Klöpper- oder Flachboden.
Torospherical or flat bottom for DN 400 and larger.
41Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
COF-Anschweißflansch „male”, EdelstahlWelding flange ”male”, stainless steelNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 250 28,5 314 288,3 250 392 0250 950,00
DN 300 28,5 371 345,4 300 392 0300 1.300,00
DN 350 28,5 438 399,0 350 392 0350 1.800,00
DN 400 33,0 497 454,0 400 392 0400 2.200,00
DN 450 38,0 562 513,1 450 392 0450 2.500,00
DN 500 40,0 605 560,0 500 392 0500 3.000,00
DN 600 45,0 690 655,0 600 392 0600 3.500,00
DN 800 50,0 900 865,0 800 392 0800 4.600,00
DN 1000 55,0 1100 1065,0 1000 392 1000 6.300,00
COF-Anschweißflansch „female”, EdelstahlWelding flange ”female”, stainless steelNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 250 28,5 314 288,3 250 393 0250 950,00
DN 300 28,5 371 345,4 300 393 0300 1.300,00
DN 350 28,5 438 399,0 350 393 0350 1.800,00
DN 400 33,0 497 454,0 400 393 0400 2.200,00
DN 450 38,0 562 513,1 450 393 0450 2.500,00
DN 500 40,0 605 560,0 500 393 0500 3.000,00
DN 600 45,0 690 655,0 600 393 0600 3.500,00
DN 800 50,0 900 865,0 800 393 0800 4.600,00
DN 1000 55,0 1100 1065,0 1000 393 1000 6.300,00
CF-
/ CO
F-B
aute
ile
Com
pone
nts
CF
/ CO
F
42 Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
COF-BauteileComponents COF
COF O-Ring Dichtungen, Cu (OFHC)O-ring gaskets, Cu (OFHC)NennweiteNominal width
AbmessungenDimensionsA (mm) B (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 250 270,9 2 394 0250 50,00
DN 300 328,0 2 394 0300 60,00
DN 350 378,8 2 394 0350 75,00
DN 400 433,6 2 394 0400 90,00
DN 450 489,2 2 394 0450 100,00
DN 500 536,0 2 394 0500 120,00
DN 600 630,0 2 394 0600 150,00
DN 800 830,0 2 394 0800 210,00
DN 1000 1.040,0 2 394 1000 300,00
COF O-Ring Dichtungen, VitonO-ring gaskets, VitonNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 250 270 2,5 395 0250 40,00
DN 300 328 2,5 395 0300 50,00
DN 350 379 2,5 395 0350 70,00
DN 400 434 2,5 395 0400 80,00
DN 450 489 2,5 395 0450 90,00
DN 500 536 2,5 395 0500 100,00
DN 600 630 2,5 395 0600 120,00
DN 800 830 2,5 395 0800 145,00
DN 1000 1.040 2,5 395 1000 180,00
COF-Schraubensatz, Edelstahl, 25 StückScrews, nuts and washers, stainless steel, set of 25NennweiteNominal dia.
AbmessungenDimensionsA (mm) B (mm)
Erforderliche Anz. pro FlanschverbindungNecessary number per flange connectionStück / pcs.
Artikel-Nr.Order No.
PreisPrice
(€)
DN 250 70 M 10 24 396 0250 55,00
DN 300 70 M 10 32 396 0300 70,00
DN 350 75 M 12 36 396 0350 120,00
DN 400 75 M 12 36 396 0400 120,00
DN 450 90 M 16 36 396 0450 220,00
DN 500 90 M 16 36 396 0500 220,00
DN 600 100 M 16 40 396 0600 340,00
DN 800 110 M 16 60 396 0800 500,00
DN 1000 120 M 16 72 396 1000 650,00
Hochtemperatur-Schmiermittel, für Schrauben High-temperature lubricant, for screwsKonfektionierungPacking
InhaltContent(g)
TemperaturbeständigkeitTemperature resistance(°C)
Artikel-Nr.Order No.
PreisPrice
(€)
Tube 50 600 359 0000 25,00
Mem
bra
nb
älg
e u
nd
Ven
tile
E
dge
wel
ded
bello
ws
and
valv
es
44 Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
Membranbälge, Hochvakuum-Ventile,Ultrahochvakuum-Ventile und GasschleusenEdge welded bellows, high vacuum valves, ultra high vacuum valves and gas locks
• Membranbälge
Nennweiten 14 mm - 100 mm Innendurchmesser
• Federbalg-Eckventile, handbetätigt
Nennweiten DN 16 KF - DN 50 KF
DN 63 ISO-K - DN 160 ISO-K
DN 16 CF - DN 63 CF
• Federbalg-Eckventile, elektro-pneumatisch,
mit Lagemeldung und Steuer-Luftventil
Nennweiten DN 16 KF - DN 50 KF
DN 63 ISO-K - DN 160 ISO-K
DN 16 CF - DN 63 CF
• CF-Ganzmetall-Eckventile
Nennweiten DN 16 CF - DN 63 CF
• Federbalg-Durchgangsventile, handbetätigt
Nennweiten DN 16 KF - DN 40 KF
• Federbalg-Eckventile, handbetätigt
mit Feinregelung (Doppelsitz)
Nennweiten DN 16 KF - DN 50 KF
• Eckventile bis DN 1000
• Sonderventile in allen Nennweiten,
Abmessungen und Ausführungen auf Anfrage
• Kugelventile in Edelstahl und Messing vernickelt
• Membranventile in Aluminium
Nennweiten DN 10 KF - DN 25 KF
• Belüftungsventile, Überdruckventile,
Nadelventile, Gasschleusen
• Edge welded bellows
Nominal widths 14 mm - 100 mm inside
• Angle valves with bellow, manually operated
Nominal widths DN 16 KF - DN 50 KF
DN 63 ISO-K - DN 160 ISO-K
DN 16 CF - DN 63 CF
• Angle valves with bellow, electro-pneumatic,
with indication of position and control air valve
Nominal widths DN 16 KF - DN 50 KF
DN 63 ISO-K - DN 160 ISO-K
DN 16 CF - DN 63 CF
• All metal angle valves CF
Nominal widths DN 16 CF - DN 63 CF
• Inline valves with bellow, manually operated
Nominal widths DN 16 KF - DN 40 KF
• Angle valves with bellow, manually operated,
with precision setting (double seat)
Nominal widths DN 16 KF - DN 50 KF
• Angle valves up to DN 1000
• Special valves in all nominal widths,
dimensions and designs on request
• Ball valves in stainless steel or nickel-plated brass
• Diaphragm valves made of aluminium
Nominal widths DN 10 KF - DN 25 KF
• Air release valves, pressure relief valves,
needle valves, gas locks
45Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
Membranbälge und VentileEdge welded bellows and valves
Wir sind in der Lage, Ihnen ein vielseitiges Produkt programm
von Standardmembranbälgen der Nennweiten 14-100 mm
anzubieten.
Je nach Kundenwunsch können wir einzelne Membranpaare
oder Komplettlösungen liefern. Als Werkstoff verwenden
wir Edelstahl 1.4435 (316L). Die Membranbälge unterliegen
unseren hohen Qualitätsansprüchen und werden ausschließ-
lich Micro-Plasma-geschweißt.
Gerne übernehmen wir für Sie die Balgauslegung.
We are able to offer a broad range of standard edge welded
bellows with nominal widths ranging from 14-100 mm.
Depending on customer’s requirements, we are able to sup-
ply individual bellows or complete solutions. As material we
use stainless steel 1.4435 (316L). The edge welded bellows
are subject to our high quality standards and are exclusively
micro-plasma welded.
Please do not hesitate to ask for the bellow’s dimensioning.
Membranbälge, Edelstahl, Micro-Plasma geschweißt Edge welded bellows, stainless steel, micro-plasma weldedInnen-ØInside Ø(mm)
Außen-ØOutside Ø(mm)
Hub *Stroke *(mm)
kleinste Längeminimum length(mm)
größte Längemaximum length(mm)
Artikel-Nr.Order No.
PreisPrice
(€)
14 25 0,6 0,35 0,95 398 1425 auf Anfrage / On request
18 32 0,9 0,35 1,25 398 1832 auf Anfrage / On request
22 49 2,0 0,50 2,50 398 2249 auf Anfrage / On request
39 58 1,7 0,50 2,20 398 3958 auf Anfrage / On request
64 89 2,1 0,50 2,60 398 6489 auf Anfrage / On request
90 115 2,1 0,50 2,60 398 9011 auf Anfrage / On request
100 130 2,2 0,60 2,80 398 1013 auf Anfrage / On request
Die Hubweiten in der Tabelle sind ausgelegt für max. 10.000
Lastwechsel bei Temperaturen von 20 °C bis max. 60 °C.
Für abweichende Einsatzbedingungen fragen Sie bitte bei
uns an.
The stroke limits indicated in the data table are dimensioned
for max. 10,000 cycles at temperatures of 20 °C up to max.
60 °C.
For different ranges of application, please don’t hesitate to
contact us.
* pro Membranpaar * per single bellow Mem
bra
nb
älg
e u
nd
Ven
tile
E
dge
wel
ded
bello
ws
and
valv
es
46 Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
KF-Ventile und ZubehörValves and accessories KF
Federbalg-Eckventil, handbetätigt, Edelstahl, Viton-gedichtetAngle valve with bellow, manually operated, stainless steel, Viton sealed NennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 KF 105 50 40 40 400 0016 320,00
DN 25 KF 110 50 50 50 400 0025 350,00
DN 40 KF 120 67 65 65 400 0040 450,00
DN 50 KF 128 90 70 70 400 0050 590,00
DN 63 ISO-K 180 117 88 88 400 0063 990,00
DN 100 ISO-K 210 150 108 108 400 0100 1.300,00
DN 160 ISO-K 260 240 138 138 400 0160 1.950,00
Federbalg-Durchgangsventil, handbetätigt, Edelstahl, Viton-gedichtetInline valve with bellow, manually operated, stainless steel, Viton sealed NennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 KF 111 60 40 80 405 0016 500,00
DN 25 KF 115 60 50 100 405 0025 600,00
DN 40 KF 140 90 65 130 405 0040 700,00
Ersatz-Ventileinsatzfür handbetätigte Federbalg-Ventile mit Viton-DichtungenSpare kitfor manually operated valves with bellows and Viton sealsNennweiteNominal width
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 KF 401 0016 170,00
DN 25 KF 401 0025 170,00
DN 40 KF 401 0040 240,00
DN 50 KF 401 0050 310,00
DN 63 ISO-K 401 0063 500,00
Ersatz-Dichtungen, Viton, für Gehäuse und VentilsitzSpare seals for valves, Viton, for valve body and seatNennweiteNominal width
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 KF 402 0016 12,00
DN 25 KF 402 0025 15,00
DN 40 KF 402 0040 18,00
DN 50 KF 402 0050 24,00
DN 63 ISO-K 402 0063 35,00
DN 100 ISO-K 402 0100 48,00
DN 160 ISO-K 402 0160 60,00
47Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
KF-Federbalg-Eckventil, handbetätigt,mit Feinregelung, Edelstahl, Viton-gedichtetAngle valve with bellow, manually operated, with precision setting, stainless steel, Viton sealed NennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 KF 105 50 40 40 409 0016 400,00
DN 25 KF 110 50 50 50 409 0025 500,00
DN 40 KF 120 67 65 65 409 0040 600,00
DN 50 KF 128 90 70 70 409 0050 700,00
Ersatz-Ventileinsätze und -Dichtungen auf Anfrage. Spare kits and seals on request.
Kugelventil, handbetätigt, Edelstahl, mit vollem DurchgangBall valve, manually operated, stainless steel, with full throughputNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 10 KF 92 48 31 58 420 0010 150,00
DN 16 KF 100 48 35 62 420 0016 190,00
DN 25 KF 126 74 54 91 420 0025 210,00
DN 40 KF 142 94 78 116 420 0040 290,00
Kugelventil, handbetätigt, mit reduziertem Durchgang,Messing vernickeltBall valve, manually operated, with reduced throughput,Brass, nickel platedNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 10 KF 92 48 31 58 421 0010 100,00
DN 16 KF 105 53 35 72 421 0016 110,00
DN 25 KF 123 68 50 89 421 0025 150,00
DN 40 KF 143 95 64 110 421 0040 220,00
Membranventil, handbetätigt, AluminiumDiaphragm valve, manually operated, aluminiumNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 10 KF 60 85 422 0010 140,00
DN 16 KF 80 85 422 0016 150,00
DN 25 KF 100 140 422 0025 200,00
Mem
bra
nb
älg
e u
nd
Ven
tile
E
dge
wel
ded
bello
ws
and
valv
es
48 Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
KF-Ventile und ZubehörValves and accessories KF
Belüftungsventil, handbetätigt, Edelstahl, Viton Vent valve, manually operated, stainless steel, VitonNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 KF 31 16 425 0016 100,00
DN 25 KF 40 30 425 0025 130,00
Überdruckventil, Edelstahl, einstellbar bis max. 1 bar DruckdifferenzPressure relief valve, stainless steel, adjustable up to max. 1 bar pressure differenceNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 25 KF 60 46 428 0025 170,00
Nadelventil, Edelstahl, KF-Anschlüsse geklebtNeedle valve, stainless steel, with bonded KF-connectionsNennweiteNominal width
AbmessungenDimensionsA (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 KF 65 429 0016 300,00
3° Nadel – Abdichtung durch Stopfbuchse.
3° Needle – sealing with gland.
Nadelventil, Messing, KF-Anschlüsse geklebtNeedle valve, brass, with bonded KF-connectionsNennweiteNominal width
AbmessungenDimensionsA (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 KF 65 429 0116 250,00
3° Nadel – Abdichtung durch Stopfbuchse.
3° Needle – sealing with gland.
49Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
Produkteigenschaften
• Dichtheit Gehäuse, Sitz: ≤ 10-9 mbar · l / s
• Ausheiztemperatur: 150 °C offen ⁄ geschlossen
• bei Stromausfall geschlossen
• Einbaulage bis DN 160: beliebig
• Steuerspannung: 12V / 24V / 48V / 110V / 220V
(bei Bestellung angeben)
• integrierter elektrischer Lagemelder
• Ventil mit Schiebedurchführung auf Anfrage
• Ersatz-Ventileinsätze auf Anfrage
Federbalg-Eckventile, elektro-pneumatisch, Edelstahl, Viton-gedichtet Angle valves with bellow, electro-pneumatic, stainless steel, Viton sealedNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 KF 200 70 40 50 410 0016 600,00
DN 25 KF 205 70 50 50 410 0025 650,00
DN 40 KF 222 90 65 67 410 0040 750,00
DN 50 KF 230 90 70 90 410 0050 900,00
DN 63 ISO-K 305 117 88 117 410 0063 1.500,00
DN 100 ISO-K 400 150 108 150 410 0100 2.100,00
DN 160 ISO-K 540 240 138 240 410 0160 3.000,00
DN 200 ISO-K * * * * 410 0200 *
DN 250 ISO-K * * * * 410 0250 *
DN 320 ISO-K * * * * 410 0320 *
DN 400 ISO-K * * * * 410 0400 *
DN 500 ISO-K * * * * 410 0500 *
* Auf Anfrage. * On request.
Ersatzdichtungen, Viton, für elektropneumatische Eckventile Spare seals, Viton, for electro-pneumatic angle valvesNennweiteNominal width
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 KF 411 0016 30,00
DN 25 KF 411 0025 35,00
DN 40 KF 411 0040 45,00
DN 50 KF 411 0050 50,00
DN 63 ISO–K 411 0063 60,00
DN 100 ISO–K 411 0100 75,00
DN 160 ISO–K 411 0160 90,00
Features
• Leakproof valve body and seat: ≤ 10-9 mbar · l / s
• Bake-out temperature: 150 °C open ⁄ closed
• Closed at power failure
• Orientation up to DN 160: at will
• Control voltage: 12V / 24V / 48V / 110V / 220V
(to be specified at order)
• Integrated electrical position indicator
• Valve with linear feedthrough on request
• Spare kits on request
Mem
bra
nb
älg
e u
nd
Ven
tile
E
dge
wel
ded
bello
ws
and
valv
es
50 Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
Gasschleusen, EdelstahlGas locks, stainless steel
Gasschleusen zum Evakuieren vakuum-isolierter
Behälter und Rohrleitungen
In Verbindung mit einem Verschlußventil genügt eine Gas-
schleuse für mehrere Isolierbehälter oder isolierte Rohr-
leitungen. Das Verschlußventil ist mit einer Sicherheitskappe
ausgestattet, welche bei einem ggf. plötzlich entstehenden
Überdruck den herausfliegenden Verschlussstopfen aufhält.
Gas Locks for evacuation of vacuum-isolated
vessels and pipings
In connection with one single loadlock valve, one gas lock is
sufficient for several insulating vessels or isolated pipings.
The loadlock valve is equipped with a safety cap blocking the
interlock plug if overpressure arises abruptly.
Gasschleusen mit Durchführung, O-Ring gedichtet, Edelstahl, Adapterstück nicht im Lieferumfang enthaltenGas lock with feedthrough, O-ring sealed, stainless steel, adapter piece not includedNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 105 70 40 50 430 0016 480,00
DN 25 110 70 50 50 430 0025 500,00
DN 40 120 90 65 67 430 0040 650,00
DN 50 128 90 70 90 430 0050 800,00
Verschlußventil mit Sicherheitskappe, EdelstahlLoadlock valve with safety cap, stainless steelNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 21 29 431 0016 130,00
DN 25 29 35 431 0025 135,00
DN 40 45 40 431 0040 170,00
DN 50 57 45 431 0050 250,00
Adapterstück für VerschlußventilAdapter piece for loadlock valveNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 50 16 5,9 432 0016 80,00
DN 25 50 24 5,9 432 0025 90,00
DN 40 50 40 5,9 432 0040 110,00
DN 50 50 51 5,9 432 0050 115,00
51Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
CF-Eckventile und ZubehörAngle valves and accessories CF
CF-Eckventil, Viton-gedichtetAngle valve, Viton sealedNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 100 50 38 38 360 0016 500,00
DN 40 118 67 63 63 360 0040 600,00
DN 63 197 117 105 105 360 0063 1.400,00
Ersatz-Ventileinsatz,für handbetätigte CF-Eckventile mit Viton-DichtungenSpare kit, for manual CF-angle valves with Viton-gasketsNennweiteNominal width
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 CF 401 0016 170,00
DN 40 CF 401 0040 240,00
DN 63 CF 401 0063 500,00
Ersatz-Dichtungen, Viton, für Gehäuse und Ventilsitz Spare seals, Viton, for valve body and seatNennweiteNominal width
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 CF 402 0016 12,00
DN 40 CF 402 0040 18,00
DN 63 CF 402 0063 35,00
Mem
bra
nb
älg
e u
nd
Ven
tile
E
dge
wel
ded
bello
ws
and
valv
es
52 Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
CF-Eckventile und ZubehörAngle valves and accessories CF
CF-Eckventil, Viton-gedichtet, elektropneumatisch Angle Valve, Viton sealed, electro-pneumaticNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 CF 195 70 38 50 364 0016 750,00
DN 40 CF 220 90 63 67 364 0040 950,00
DN 63 CF 322 117 105 117 364 0063 1.600,00
Ersatz-Dichtungen, Viton, für elektropneumatische EckventileSpare seals, Viton, for electro-pneumatic angle valvesNennweiteNominal width
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 CF 411 0016 30,00
DN 40 CF 411 0040 45,00
DN 63 CF 411 0063 60,00
Produkteigenschaften
• Dichtheit Gehäuse, Sitz: ≤ 10-9 mbar · l / s
• Ausheiztemperatur: 150 °C offen ⁄ geschlossen
• bei Stromausfall geschlossen
• Einbaulage bis DN 160: beliebig
• Steuerspannung: 12V / 24V / 48V / 110V / 220V
(bei Bestellung angeben)
• integrierter elektrischer Lagemelder
• Ventil mit Schiebedurchführung auf Anfrage
• Ersatz-Ventileinsätze auf Anfrage
Features
• Leakproof valve body and seat: ≤ 10-9 mbar · l / s
• Bake-out temperature: 150 °C open ⁄ closed
• Closed at power failure
• Orientation up to DN 160: at will
• Control voltage: 12V / 24V / 48V / 110V / 220V
(to be specified at order)
• Integrated electrical position indicator
• Valve with linear feedthrough on request
• Spare kits on request
Zu
beh
ör
Acc
esso
ries
54 Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
Feinvakuum-AdsorptionsfallenMolecular sieve traps
Zeolite traps made of stainless steel
with integrated heat ing element
For the generation of an oil-free high and ultra-high vacuum,
e.g. with turbo-molecular pumps, an adsorption trap filled
with zeolite is placed on the pump side of vane-type rotary
vacuum pumps. The zeolite filling absorbs oil and water
vapor and therefore prevents a contamination of the high and
ultra-high vacuum. At the end of a pump cycle the saturated
zeolite filling can easily be regenerated by the integrated
heating element.
Zeolithfallen aus Edelstahl
mit eingebautem Heizstab
Zur Erzeugung eines ölfreien Hoch- und Ultrahoch vakuums,
z.B. mit Turbo-Molekularpumpen, setzt man auf die Pump-
seite von Drehschieber-Vakuum pumpen eine Adsorptionsfalle,
die mit Zeolith gefüllt ist. Die Zeolithfüllung nimmt den Öl-
und Wasserdampf auf und verhindert somit eine Kontamina-
tion des Hoch- und Ultrahochvakuums. Nach Beendigung
eines Pumpzyklus kann die gesättigte Zeolithfüllung durch
den eingebauten Heizstab leicht regeneriert werden.
Zeolithfalle für Feinvakuumpumpen, Edelstahl, incl. Heizstab, Meßanschluß und ZeolithZeolite trap for primary pumps, stainless steel, incl. heating rod, gauge connection and ZeoliteNennweiteNominal width
A (mm) B (mm) C (mm) D (mm)
Benötigtes ZeolithZeolite, required(g)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 KF 260 104 35 155 330 450 0016 650,00
DN 25 KF 260 104 35 155 330 450 0025 650,00
DN 40 KF 260 104 35 155 330 450 0040 750,00
DN 50 KF 335 129 35 210 730 450 0050 950,00
DN 63 ISO–K 550 219 40 460 3100 450 0063 1.400,00
DN 100 ISO–K 550 219 40 460 3100 450 0100 1.600,00
Meßröhrenanschluß DN 25 KF bei allen Größen.
Gauge connection DN 25 KF on all traps.
Ersatz-Heizstab, EdelstahlSpare heating rod, stainless steelNennweiteNominal width
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 KF 120 Watt * 230 VAC ** 451 0040 130,00
DN 25 KF 120 Watt * 230 VAC ** 451 0040 130,00
DN 40 KF 120 Watt * 230 VAC ** 451 0040 130,00
DN 50 KF 120 Watt * 230 VAC ** 451 0050 150,00
DN 63 ISO-K 250 Watt * 230 VAC ** 451 0063 230,00
DN 100 ISO-K 250 Watt * 230 VAC ** 451 0100 230,00
* Leistung * Power
** Spannung ** Voltage
ZeolithZeoliteKonfektionierungPacking
MengeAmount(g)
Artikel-Nr.Order No.
PreisPrice
(€)
Beutel / bag 1000 452 0000 50,00
55Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
KondensatabscheiderCondensate traps
Design in stainless steel with inspection glass and drain cock
or in stainless steel with acrylic glass cylinder and drain cock.
Condensation can occur in the suction as well as in the
exhaust pipes of a vacuum system during the pumping out
of vapors. In order to protect the pump from these conden-
sates, it is recommended to insert a condensate trap.
The level of condensate is clearly visible through the inspec-
tion glass, in the stainless steel version as well as through
the acrylic glass cylinder. It can be lowered during the
pumping process or fully emptied at standstill with the drain
cock.
Ausführung in Edelstahl mit Schauglas und Ablasshahn oder
in Edelstahl mit Acrylglaszylinder und Ablasshahn.
Sowohl in den Ansaug- als auch in den Auspuffleitungen
eines Vakuumsystems können sich beim Abpumpen von
Dämpfen Kondensate bilden. Um die Pumpe vor diesen
Kondensaten zu schützen, empfiehlt es sich, Kondensat-
abscheider einzusetzen.
Durch das Schauglas bei der Edelstahlausführung sowie
durch den Acrylglaszylinder ist der Füllstand des Kondensats
gut sichtbar und kann auch bei laufendem Pump prozeß über
den Ablaßhahn abgesenkt bzw. bei Stillstand völlig entleert
werden.
Kondensatabscheider, EdelstahlCondensate trap, stainless steelNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 KF 170 104 35 20 460 0016 290,00
DN 25 KF 200 104 35 20 460 0025 350,00
DN 40 KF 200 129 35 20 460 0040 450,00
DN 50 KF 200 160 35 20 460 0050 500,00
Kondensatabscheider, Edelstahl, AcrylglasCondensate trap, stainless steel, acryl glassNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 25 KF 210 122 30 25 461 0025 400,00
DN 40 KF 210 142 30 25 461 0040 450,00
Zu
beh
ör
Acc
esso
ries
56 Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
KondensatabscheiderCondensate traps
Kondensator mit Vorlagebehälter, Edelstahl, wassergekühlt, 0,5 m² Kühlfläche, 30 ltr. VorlageCondensator with reservoir, stainless steel, water cooled, 0,5 m² cooling surface, 30 ltr. reservoirNennweiteNominal width
Artikel-Nr.Order No.
PreisPrice
(€)
DN 40 KF 465 0040 3.400,00
DN 63 ISO-K 465 0063 3.900,00
Maße auf Anfrage.
Dimensions on request.
57Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
Ausführung Edelstahl
Kühlfallen mit flüssigem Stickstoff werden eingesetzt, um
Treibmittelrückströmung in den Rezipienten zu vermeiden.
Die rückströmenden Öldämpfe, Kondensate oder Treibmittel-
teilchen werden an der Oberfläche des mit flüssigem Stick-
stoff gefüllten Tanks ausgefroren. Man erreicht dadurch
kürzere Pumpzeiten und niedrigere Drücke.
Stickstoff-Tiefkühlfallen sind in verschiedenen Ausführungen
erhältlich:
• für Feinvakuumpumpen
Nennweiten DN 16 KF - DN 63 ISO-K
• für Diffusionspumpen als Ringkühlfalle
mit und ohne Blende
Nennweiten DN 63 ISO-K (CF) - DN 250 ISO-K (CF)
• in Sonderausführungen als Kugelkühlfalle
Nennweiten DN 63 ISO-K - DN 250 ISO-K
Stickstoff-TiefkühlfallenNitrogen cold traps
Stainless steel design
Cold traps with liquid nitrogen are used in order to prevent
backstreaming of pumping fluids into the recipients. The oil
vapors, condensates or diffusion pump fluids flowing back
are frozen out on the surface of the tanks filled with liquid
nitrogen. Due to shorter pumping times and lower pressures
are achieved.
Nitrogen cold traps are available in various
versions:
• for mechanical pumps
nominal widths DN 16 KF - DN 63 ISO-K
• for diffusion pumps as ring cold trap
with and without screen
nominal widths DN 63 ISO-K (CF) - DN 250 ISO-K (CF)
• in special design as spherical cold trap
nominal widths DN 63 ISO-K - DN 250 ISO-K
LN2-Kühlfalle, demontierbar, EdelstahlLN2 cold trap, removable, stainless steel
Größere Nennweiten und andere Ausführungen, auch mit zusätzlichem Meßröhren-
anschluß, auf Anfrage.
Larger dimensions and other versions, also with additional gauge connection,
on request.
NennweiteNominal width
A (mm) B (mm) C (mm) D (mm)
Benötigtes LN2LN2, required(ml)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 KF 190 90 65 180 300 470 0016 500,00
DN 25 KF 225 104 75 215 600 470 0025 550,00
DN 40 KF 225 104 75 215 600 470 0040 600,00
DN 50 KF 230 130 90 225 1000 470 0050 800,00
DN 63 ISO-K 295 130 98 265 1500 470 0063 1.100,00
LN2-Kühlfalle, demontierbar, EdelstahlLN2 cold trap, removable, stainless steel
Größere Nennweiten und andere Ausführungen, auch mit zusätzlichem Meßröhren-
anschluß, auf Anfrage.
Larger dimensions and other versions, also with additional gauge connection,
on request.
NennweiteNominal width
A (mm) B (mm) C (mm) D (mm)
Benötigtes LN2LN2, required(ml)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 KF 190 90 65 120 300 472 0016 500,00
DN 25 KF 225 104 75 140 600 472 0025 550,00
DN 40 KF 225 104 75 140 600 472 0040 600,00
DN 50 KF 230 130 90 125 1000 472 0050 800,00
DN 63 ISO-K 295 130 98 165 1500 472 0063 1.150,00
Zu
beh
ör
Acc
esso
ries
58 Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
Stickstoff-TiefkühlfallenNitrogen cold traps
LN2-Ringkühlfalle, demontierbar, Edelstahlfür Diffusionspumpen mit MeßröhrenanschlußLN2 ring cold trap, removable, stainless steelfor diffusion pumps with gauge connection
Flansche drehbar. Flanges rotatable.
Mit Meßröhrenanschluß DN 40 CF. With gauge connection DN 40 CF.
NennweiteNominal width
A (mm) B (mm) C (mm)
Benötigtes LN2LN2, required(ml)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 63 ISO-K 225 206 150 2000 475 0063 2.000,00
DN 100 ISO-K 250 256 160 3150 475 0100 2.400,00
DN 160 ISO-K 260 267 170 4030 475 0160 2.900,00
DN 200 ISO-K 275 340 185 7000 475 0200 3.600,00
DN 250 ISO-K 300 420 200 10430 475 0250 4.300,00
UHV-LN2-Ringkühlfalle, EdelstahlUHV LN2 ring cold trap, stainless steelNennweiteNominal width
A (mm) B (mm) C (mm)
Benötigtes LN2LN2, required(ml)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 63 CF 300 206 150 2000 476 0063 2.000,00
DN 100 CF 320 256 160 3150 476 0100 2.400,00
DN 160 CF 350 267 170 4030 476 0160 3.300,00
DN 200 CF 370 340 185 7000 476 0200 3.950,00
DN 250 CF 400 420 200 10430 476 0250 5.200,00
Du
rch
füh
run
gen
Fe
edth
roug
hs
60 Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
DurchführungenFeedthroughs
Einfachdurchführung auf KF-Flansch1 conductor on flange KFNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 1,5 7,0 8,0 500 1116 100,00
DN 25 1,5 7,0 8,0 500 1125 100,00
DN 40 1,5 7,0 8,0 500 1140 105,00
DN 50 1,5 7,0 8,0 500 1150 125,00
DN 16 3,0 9,0 13,0 500 3116 105,00
DN 25 3,0 9,0 13,0 500 3125 105,00
DN 40 3,0 9,0 13,0 500 3140 110,00
DN 50 3,0 9,0 13,0 500 3150 130,00
DN 16 4,0 10,8 13,0 500 4116 105,00
DN 25 4,0 10,8 13,0 500 4125 110,00
DN 40 4,0 10,8 13,0 500 4140 115,00
DN 50 4,0 10,8 13,0 500 4150 135,00
Elektrische Datenin Abhängigkeit vom Leiter-Durchmesser
Isolationsmaterial: Keramik (Al2O3)
Leitermaterial: Kupfer (Cu)
Die angegebenen Werte sind nur als Richtwerte zu
betrachten und können im Einzelfall vom Nennwert
abweichen (z.B. abhängig von der Anordnung der
Stromdurchführungen, der Geometrie der Elektroden,
der Luftfeuchtigkeit oder dem Druck).
Electrical datadepending on conductor diameter
Insulation material: ceramik (Al2O3)
Conductor material: copper (Cu)
The figures indicated are to be considered only as
approximate values. They can deviate from the indi-
cated numbers (e.g. depending on the layout of the
current feedthroughs, the geometry of the electrodes,
the humidity or the pressure).
Conductor diameter 1,5 mm 3 mm 4 mm
Max. current 15 A 50 A 80 A
Length of insulation (Al2O3) 8 mm 13 mm 13 mm
Max. voltage 4 kV 6 kV 6 kV
Leiter-Durchmesser 1,5 mm 3 mm 4 mm
Max. Stromstärke 15 A 50 A 80 A
Isolationsstrecke (Al2O3) 8 mm 13 mm 13 mm
Max. Spannung 4 kV 6 kV 6 kV
61Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
Zweifachdurchführung auf KF-Flansch2 conductors on flange KF
Dreifachdurchführung auf KF-Flansch3 conductors on flange KF
Vierfachdurchführung auf KF-Flansch4 conductors on flange KF
NennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 25 1,5 7,0 8,0 11,0 500 1225 160,00
DN 40 1,5 7,0 8,0 11,0 500 1240 160,00
DN 50 1,5 7,0 8,0 11,0 500 1250 180,00
DN 25 3,0 9,0 13,0 12,0 500 3225 160,00
DN 40 3,0 9,0 13,0 12,0 500 3240 170,00
DN 50 3,0 9,0 13,0 12,0 500 3250 180,00
DN 40 4,0 10,8 13,0 15,0 500 4240 180,00
DN 50 4,0 10,8 13,0 15,0 500 4250 190,00
NennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 25 1,5 7,0 8,0 13,0 500 1325 180,00
DN 40 1,5 7,0 8,0 13,0 500 1340 190,00
DN 50 1,5 7,0 8,0 13,0 500 1350 210,00
DN 40 3,0 9,0 13,0 15,0 500 3340 210,00
DN 50 3,0 9,0 13,0 15,0 500 3350 230,00
DN 40 4,0 10,8 13,0 17,3 500 4340 220,00
DN 50 4,0 10,8 13,0 17,3 500 4350 240,00
NennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 25 1,5 7,0 8,0 14,0 500 1425 230,00
DN 40 1,5 7,0 8,0 14,0 500 1440 240,00
DN 50 1,5 7,0 8,0 14,0 500 1450 250,00
DN 40 3,0 9,0 13,0 18,0 500 3440 250,00
DN 50 3,0 9,0 13,0 18,0 500 3450 260,00
DN 40 4,0 10,8 13,0 21,0 500 4440 260,00
DN 50 4,0 10,8 13,0 21,0 500 4450 270,00
Du
rch
füh
run
gen
Fe
edth
roug
hs
62 Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
DurchführungenFeedthroughs
Einfachdurchführung auf CF-Flansch1 conductor on flange CFNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 1,5 7,0 8,0 510 1116 110,00
DN 40 1,5 7,0 8,0 510 1140 130,00
DN 63 1,5 7,0 8,0 510 1163 200,00
DN 16 3,0 9,0 13,0 510 3116 120,00
DN 40 3,0 9,0 13,0 510 3140 140,00
DN 63 3,0 9,0 13,0 510 3163 210,00
DN 16 4,0 10,8 13,0 510 4116 130,00
DN 40 4,0 10,8 13,0 510 4140 140,00
DN 63 4,0 10,8 13,0 510 4163 220,00
Zweifachdurchführung auf CF-Flansch2 conductors on flange CF
Vierfachdurchführung auf CF-Flansch4 conductors on flange CF
NennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 1,5 7,0 8,0 8,5 510 1216 180,00
DN 40 1,5 7,0 8,0 8,5 510 1240 190,00
DN 63 1,5 7,0 8,0 8,5 510 1263 270,00
DN 40 3,0 9,0 13,0 13,0 510 3240 200,00
DN 63 3,0 9,0 13,0 13,0 510 3263 270,00
DN 40 4,0 10,8 13,0 15,0 510 4240 200,00
DN 63 4,0 10,8 13,0 15,0 510 4263 280,00
NennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 40 1,5 7,0 8,0 14,0 510 1440 240,00
DN 63 1,5 7,0 8,0 14,0 510 1463 320,00
DN 100 1,5 7,0 8,0 14,0 510 1410 380,00
DN 40 3,0 9,0 13,0 18,0 510 3440 250,00
DN 63 3,0 9,0 13,0 18,0 510 3463 330,00
DN 100 3,0 9,0 13,0 18,0 510 3410 400,00
DN 40 4,0 10,8 13,0 21,0 510 4440 260,00
DN 63 4,0 10,8 13,0 21,0 510 4463 350,00
DN 100 4,0 10,8 13,0 21,0 510 4410 410,00
63Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
Fünffachdurchführung auf CF-Flansch5 conductors on flange CF
Siebenfachdurchführung auf CF-Flansch7 conductors on flange CF
NennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 40 1,5 7,0 8,0 20,0 510 1540 270,00
DN 63 1,5 7,0 8,0 20,0 510 1563 350,00
DN 100 1,5 7,0 8,0 20,0 510 1510 400,00
DN 40 3,0 9,0 13,0 24,0 510 3540 280,00
DN 63 3,0 9,0 13,0 24,0 510 3563 360,00
DN 100 3,0 9,0 13,0 24,0 510 3510 410,00
DN 63 4,0 10,8 13,0 28,0 510 4563 370,00
DN 100 4,0 10,8 13,0 28,0 510 4510 410,00
NennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 40 1,5 7,0 8,0 20,0 510 1740 320,00
DN 63 1,5 7,0 8,0 20,0 510 1763 400,00
DN 100 1,5 7,0 8,0 20,0 510 1710 450,00
DN 40 3,0 9,0 13,0 25,0 510 3740 330,00
DN 63 3,0 9,0 13,0 25,0 510 3763 410,00
DN 100 3,0 9,0 13,0 25,0 510 3710 460,00
DN 63 4,0 10,8 13,0 28,0 510 4763 420,00
DN 100 4,0 10,8 13,0 28,0 510 4710 470,00
Koaxiale Durchführung auf CF-Flansch, mit BNC-BuchseCoaxial feedthrough on flange CF, BNC typeNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 CF 22,7 44 9,6 520 0116 170,00
DN 40 CF 18,0 44 9,6 520 0140 180,00
Du
rch
füh
run
gen
Fe
edth
roug
hs
64 Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
DurchführungenFeedthroughs
Koaxiale Durchführung auf CF-Flansch, mit Hochspannungsbuchse (SHV ⁄ MHV)Coaxial feedthrough on flange CF, SHV ⁄ MHV-TypeNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 CF 27,2 46 9,7 520 0216... 220,00
DN 40 CF 22,5 46 9,7 520 0240... 230,00
Bei Bestellung Typ der gewünschten Buchse angeben (SHV oder MHV):
Beispiel: 520 0216 SHV oder 520 0216 MHV
Indicate type of connector with order (SHV or MHV):
Example: 520 0216 SHV or 520 0216 MHV
Koaxiale Durchführung auf CF-Flansch, mit N-Chassis BuchseCoaxial feedthrough on flange CF, N-TypeNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 40 CF 24,5 40 16,0 520 0340 280,00
DN 63 CF 25,0 40 16,0 520 0363 400,00
Koaxiale Durchführung auf KF-Flansch*,BNC-Buchse, O-Ring gedichtetCoaxial feedthrough on flange KF*,BNC-Type, O-ring sealedNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 25 KF 18 30 9,6 520 1025 125,00
DN 40 KF 18 30 9,6 520 1040 130,00
DN 50 KF 18 30 9,6 520 1050 140,00
Koaxiale Durchführung auf KF-Flansch*, mit Hochspannungsbuchse (SHV ⁄ MHV), O-Ring gedichtet, Coaxial feedthrough on flange KF*,SHV ⁄ MHV-Type, O-ring sealedNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 25 KF 16 39 9,6 520 1125... 125,00
DN 40 KF 16 39 9,6 520 1140... 130,00
DN 50 KF 16 39 9,6 520 1150... 140,00
Bei Bestellung Typ der gewünschten Buchse angeben (SHV oder MHV):
Beispiel: 520 1125 SHV oder 520 1125 MHV
Indicate type of connector with order (SHV or MHV):
Example: 520 1125 SHV or 520 1125 MHV
* bauartbedingte Leckraten im Bereich 10-6 mbar I / s
* leakage rates in the range of 10-6 mbar I / s depending on design
65Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
Koaxiale Durchführung auf KF-Flansch*,mit N-Chassis Buchse, O-Ring gedichtetCoaxial feedthrough on flange KF*,N-Type, O-ring sealedNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 25 KF 18 41 16,0 520 1225 125,00
DN 40 KF 18 41 16,0 520 1240 130,00
DN 50 KF 18 41 16,0 520 1250 140,00
NennweiteNominal width
AbmessungenDimensionsA (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 KF 25 520 2016 90,00
DN 25 KF 25 520 2025 100,00
DN 40 KF 25 520 2040 120,00
DN 50 KF 25 520 2050 140,00
* bauartbedingte Leckraten im Bereich 10-6 mbar I / s
* leakage rates in the range of 10-6 mbar I / s depending on design
Quetschverschraubung für Thermoelementdurchführung, Edelstahl, Schraube aus MessingCompression fitting for thermocouple feedthroughs,stainless steel, screw made of brass
Teile sind vorgebohrt auf Durchmesser 1 mm. All screws drilled with Ø 1 mm.
O-Ring Dichtungen für Durchmesser 1 mm bis 2 mm liegen bei.
O-ring seals for diameters 1 mm and 2 mm are enclosed.
Thermoelementdurchführung, hohl, für Draht-Ø bis 1 mm Thermocouple lead-through, hollow, for wires up to Ø 1 mm NennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 CF 1 8 3 520 3016 190,00
DN 40 CF 1 10 3 520 3040 210,00
DN 63 CF 1 10 3 520 3063 260,00
Anzahl der Durchführungen: 2 Number of feedthroughs: 2
Thermoelementdrähte können eingelötet werden. Wires can be hard soldered.
Du
rch
füh
run
gen
Fe
edth
roug
hs
66 Andere Abmessungen und Ausführungen auf Anfrage. Other dimensions and versions on request.
DurchführungenFeedthroughs
Flüssigkeitsdurchführung auf KF- oder CF-Flansch,geeignet für Wasser und LN2
Liquid feedthrough on flange KF or CFsuitable for water and LN2
NennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 40 KF 8x1 22 100 300 530 0040 200,00
DN 40 CF 8x1 22 100 300 530 0035 250,00
Drehdurchführung, gedichtet mit Wellendichtringen,für Anwendungen im HochvakuumRotary motion feedthrough with radial shaft seal for applications in high vacuum systemsNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 40 KF 65 82 20 20 550 0140 500,00
DN 63 ISO-K 65 82 20 20 550 0163 700,00
Dreh-Schiebedurchführung, O-Ring gedichtet,für Anwendungen im HochvakuumRotary ⁄ linear motion feedthrough, O-ring sealed,for applications in high vacuum systemsNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 16 KF 8 30 550 0216 90,00
DN 25 KF 12 30 550 0225 100,00
DN 40 KF 15 30 550 0240 130,00
Welle im Lieferumfang nicht enhalten. Shaft not included.
UH
V-T
ech
nik
U
HV
tec
hnol
ogy
68 * Preise auf Anfrage. * Prices on request.
Andere Hübe auf Anfrage. Different strokes on request.
Andere Ausführungen von Manipulatoren fertigen wir auf Kundenwunsch.
Different versions of manipulators will be produced according to customer’s requirements.
UHV-ManipulatorenUHV manipulators
NennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 40 ⁄ 40 90 100 83 556 0040 *
DN 63 ⁄ 63 120 100 100 556 0063 *
Z-Manipulator, Hub 100 mm,membranbalggedichtet, handbetätigt, komplett ausheizbarZ manipulator, stroke 100 mm, sealed with edge welded bellows, manually operated, completely bakeable
Andere Hübe auf Anfrage. Different strokes on request.
Z-Manipulator, Hub 100 mm,membranbalggedichtet, handbetätigtZ manipulator, stroke 100 mm,sealed with edge welded bellows, manually operatedNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 63 ⁄ 100 120 100 165 557 0063 *
DN 100 ⁄ 100 125 100 195 557 0100 *
UHV-Drehdurchführung mit 2 differentiellen PumpstutzenUHV rotary motion feedthrough 2 x differentially pumped
B
NennweiteNominal width
AbmessungenDimensionsA (mm) B (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 63 CF 135 60 560 0063 *
DN 100 CF 135 90 560 0100 *
DN 160 CF 170 140 560 0160 *
DN 250 CF 94 250 560 0250 *
UHV-Drehdurchführung mit 2 differentiellen Pumpstutzen 2 x differentially pumped rotary feedthrough for UHV
69* Preise auf Anfrage. * Prices on request. UH
V-T
ech
nik
U
HV
tec
hnol
ogy
Antrieb durch Gleichstrommotor 5000 rpm / 24 V / 6 W / 2 Ncm.
Untersetzung durch Planetengetriebe mit zusätzlicher externer Untersetzung 4 :1.
Andere Antriebe auf Anfrage!
Drive by means of DC motor 5000 rpm / 24 V / 6 W / 2 Ncm.
Gearing down by means of epicyclical gear with additional external gearing down of 4 :1.
Other drives on request.
UHV-DrehdurchführungenUHV rotary motion feedthroughs
Präzisions-Drehdurchführung auf Flansch DN 40 CF, handbetätigt, mit Skalierung in Schritten von 2°Rotary motion feedthrough on flange DN 40 CF,manually operated, with scale in steps of 2°NennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 40 CF 17 174 10 M 4 553 0040 *
Präzisions-Drehdurchführung auf Flansch DN 40 CF, mit Zahnriemenscheibe für elektromotorischen Antrieb (ohne Motor)Rotary motion feedthrough on flange DN 40 CF,with gear for electromotive drive (without motor)NennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 40 CF 17 119,5 10 M 4 553 0140 *
Präzisions-Drehdurchführung auf Flansch DN 40 CF, mit Zahnriemenscheibe für elektromotorischen Antrieb (mit Motor)Rotary motion feedthrough on flange DN 40 CF,with gear for electromotive drive (with motor)NennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 40 CF 17 155 10 M 4 553 0240 *
Die Übertragung der Drehbewegung – bei gleichzeitig
hohem übertragbarem Drehmoment – erfolgt durch eine
Welle, die membranbalggedichtet ist.
Max. übertragb. Drehmoment: 500 Ncm (statisch)
1.000 Ncm (dynamisch)
Maximale Drehzahl: 1.000 U ⁄ min (kurzzeitig)
Die Lebensdauer des Membranbalgs beträgt 4 x105 Um-
drehungen. Die max. Ausheiztemperatur beträgt 300 °C.
Transfer of rotation – with, at the same time, high trans-
ferable torque – is realized by a shaft which is sealed with
edge welded bellows.
Maximum transferable torque: 500 Ncm (static)
1,000 Ncm (dynamic)
Maximum speed: 1,000 rpm (short-time)
The life time of the edge welded bellow is 4 x105 cycles.
The maximum bake-out temperature is 300 °C.
70 * Preise auf Anfrage. * Prices on request.
Die Übertragung der Linearbewegung in das Vakuum erfolgt durch eine Gewindespindel
M 8x1, die wellbalggedichtet ist. Der Drehkopf ist mit einer Skalierung aus gestattet, die
eine Ablesegenauigkeit von 0,02 mm ermöglicht. Motorischer Antrieb auf Anfrage.
Transfer of linear movement into the vacuum is realized by a threaded spindle M 8x1,
which is bellow-sealed. The rotary head is equipped with a scaling that provides an
accuracy of reading of 0,02 mm. Motor drives are available on request.
Die Linearbewegung erfolgt durch die Betätigung eines Stempels, der durch eine
Schraube arretiert werden kann. Der Stempel wird atmosphärenseitig in einem
Gleitlager aus Bronze geführt.
The linear movement is realized by a plunger that can be locked with a stop screw.
On the atmospheric side the plunger is guided in a slide bearing made of bronze.
UHV-DurchführungenUHV feedthroughs
Schnellschiebedurchführung, montiert auf Flansch DN 40 CF Fast linear motion feedthrough, mounted on flange DN 40 CFNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 40 CF 105 50 12 M 6 554 0240 *
DN 40 CF 175 100 12 M 6 554 0340 *
Lineardurchführung, montiert auf Flansch DN 40 CF Linear motion feedthrough, mounted on flange DN 40 CFNennweiteNominal width
AbmessungenDimensionsA (mm) B (mm) C (mm) D (mm)
Artikel-Nr.Order No.
PreisPrice
(€)
DN 40 CF 105 50 18 M 6 554 0040 *
DN 40 CF 175 100 18 M 6 554 0140 *
PINK GmbH Vakuumtechnik
Gyula-Horn-Str. 20
97877 Wertheim
Germany
T +49 (0) 93 42 / 872-0
F +49 (0) 93 42 /872-111
www.pink-vak.de
Dt.
/Eng
l./10
.07/
3000
/P/H