KONE AMDDoors and EntrancesArchitectural design Information

For large cars or special applications four and six panelcentre opening types are available

Door configurations

KONE AMD-1Two panel centre opening AMD-1 door configuration is themost traffic-efficient , allowing exit and entry even beforethe doors are fully open.

KONE AMD-2AMD-2 is a two panel side opening door. This configurationsaves space and shaft width but is not as efficientoperationally as centre opening door.

Right:Centre opening AMD1door with Frame entrance,plaster walls,KONE Sigma landing fixtures.

The design of elevator doors and theirsurroundings is challenging:

Smooth operation of the doors isimportant in the flow of passengertraffic. Fast, reliable and quiet doorsminimize waiting time and improveconvenience.

The entrances must provide thepassengers with safe, easy andconvenient access to the elevatorsand landing fixtures.

Elevator, lobby, and entrance designhas to meet both aesthetical andfunctional requirements. The entrancesform the structural interface betweenthe building and the elevator, andchannel the passengers between thelandings and the elevator cars.

The KONE AMD doors are designedand engineered to meet thesedemands, combining safety,performance, durability and attractivestyling.

KONE AMD Doors and Entrances

by separate agreement

Narrow Frame Entrance

The 50 mm wide NarrowFrame reduces the visualimpact of the landingentrance, helping to blend itwith the lobby design. Theentrance jambs can befinished either in the wallfinish or in the door panelmaterial. The flush or surfacemounted landing fixtures arefixed to the wall.

Left:Centre opening AMD1 door,Narrow Frame entrance,wall and floor finished in stone,Delta ThinLine landing fixtures

Below:Centre opening AMD-1 door,Narrow Frame entrance,wall and floor finished in stone,Oval Delta FlushLine landingfixtures

Right:Side opening AMD-2 door,Narrow Frame entrance withcustom architrave, oiled andlacquered plywood walls withaluminum strips, stone floor,Delta ThinLine landing fixtures

The 150mm wide Frameentrance is an economicaland attractive solution. Thedoor jambs are finished inthe same material as thedoor panel, and the flush orsurface mounted landingfixtures are built into thedoor frame to reduce theneed for extra finishingwork.

Left:Side opening AMD-2 doors,Frame entrance, plaster walls,plastic tile flooring,Sigma landing fixtures

Right:Centre opening AMD-1 door,Frame entrance,Sigma landing fixtures

Below:Side opening AMD-2 door,Frame entrance,Sigma Landing fixtures

Frame Entrance

Full Front Entrance

The Full Front entranceminimizes any extrafinishing work – it coversthe full height and widthof the hoistway, allowingquick completion oflandings. The flush orsurface mounted landingfixtures are built into thefront.

Glass DoorsAs an optional feature inlobby design the KONEAMD door family includesglass door panels.

Left:Centre opening AMD1 doorwith Full Front entrance inpatterned stainless steel,glass clad brick wall,Delta ThinLine landing fixtures

Right:

Centre opening AMD1 doorwith glass panels, NarrowFrame entrance, wall and floorfinished in stone, DeltaThinLine landing fixtures.

Kone KONE AMD doorsand entrances provide awide range of alternativesthat offer the maximumflexibility in the innovativedesign of entrances andlobbies.

Custom built entrances

LL

HR

HH

HA

HB

LA LA

LL

HR

HH

HA

LA LA

AAB

A

Frame

A–A

D-D

Front

Front with extended top

B–B

Frame with MonoSpace control cabinet

(top floor only)

Front with MonoSpace control cabinet

(top floor only)

Frame A-A

Frame with MonoSpace control cabinet B-B®

LL = clear opening width800 – 1500

HH = clear height in doorentrance1900 – 2900

LA = uprights width50 (narrow frame)150 (frame)LL/2+70 (front)

LB = side opening door slampost width50 (narrow frame)150 (frame)170 (front)220 (front)270 (front)

HA = lintel height50 (narrow frame)195270370470

HR = raw opening height222523002400250026002700280029003000

Glass doorsA = door frame height100150220B = 1100

LL = clear opening width600 (frame)700 (frame or front)800 (frame or front)900 (frame or front)1000 (frame)1100 (frame)

HH = clear height in doorentrance2000, 2100

LA = uprights width150 (frame)LL/2+70 (front)

LB = side opening door slampost width150 (frame)170 (front)220 (front)270 (front)

HA = lintel height195270370470

HB = top extension panel200300400500

HR = raw opening height222523002400250026002700280029003000

Design 1 Design 2

Entrance facades

Frame, A-A

Frame with MonoSpace control cabinet, B-B®

Narrow Frame Frame Front Frame with MonoSpace control cabinet

Front with MonoSpace control cabinetNarrow Frame with half height glass doors

Frame with half height glass doors

Front with half height glass doors

Narrow Frame class door Frame class door Front glass door with MonoSpace control cabinet

B-BA-A

C-C D-D

®

®

®

Recommended door jamb and building interface types:

Sill alternatives:Narrow sillStandard sill with carpet trim

Side frame

by separate agreement

by separate agreement

Top frame C–C D–D

www.kone.com

This publication is for general information and we reserve the right at any time to alter the product design and specifications. No statement it containsshould be constructed as a warranty or condition, express or implied, as to any product, its fitness for any particular purpose or quality, or any modification orrepresentation of the terms of any purchase agreement. Minor differences between printed and actual colours may exist.

1213