Instruction ManualVer. 2

● Table of Contents

Name and Use of each part- 1

Product Installation------- 2

■ Thank you for purchasing the product.

■ After you read the instruction manual, please use it.

■ Please keep the instruction manual for future reference.

■ Duplication of this product is prohibited.

Product Configuration----- 4

How to Use the Product and Cautions - 3

Warranty--------------- 5

HR-N750FTP

Name and Use of Each Part

■ Body

■ Grip

■ Rubber Grip

■ Gender Installation Hole

■ Joint for fixing grip

■ Body Slide Button

■ Suction Plate

■ Rubber for removal body

■ Suction Plate Holder

■ Grip Slide Holder

■ Body As the main body of the product, it prevents suction plate from receiving direct sunlight and covers the each part with neat appearance.

■ Rubber GripRubber grips are moved about 10mm up and down and presses the navigation/the cell phone not to stray from the subject grip.

■ Gender Installation Hole

When user equips the cell phone, the hole is for equipping charge gender.

■ Body Slide Button

After equipping the navigation/the cell phone, the button is for fixing or disengaging it to move back and forth.■ Suction

Plate Holder

When the navigation cradle is equipped on the dashboard, its role is to hold the suction plate.

■ Suction Plate

Device for fixing the cradle on the dashboard.

■ Rubber for removal body

This is for reducing the frictional sound from the cradle when driving.

■ Joint for fixing grip

Part to joint the body and the grip not to move.

■ Grip Grip is for safely fixing the navigation/the cell phone.■ Rubber for removal grip noise

Part to fix or to move the grip about 100mm up and down.

■ Grip Slide Holder

Device to reduce the noise from the grip shaking.

■ Rubber for removal grip noise

-2-

◆ Wipe the place for installation clean with a wet cloth or a wipe.

Product Installation

◆ Dry the place perfectly.

◆ Remove the release paper from the suction plate.

◆ After checking the suction plate evenly located on the dashboard, press strongly the body and turn the holder clockwise to the end.

◆ If the suction has been finished completely, push the body slide button and pull the grip to the maximum.

◆ Turn the joint anticlockwise which is between the body and the grip to release fixing.

◆ After positioning at the angle user wants, turn the joint again to fix.

Suction Suction Release

Keep the Suction Place even

Press Strongly

LO

CK

RE

LE

AS

E

Body Slide Button

30mm Move

Fixing Release

Fixing

-3-

Product Installation

◆ If the front and rear position of the grip has been fixed, turn the grip slide holder anticlockwise at the bottom of the grip to release fixing.

◆ Hold the body not to shake, and move the grip softly up and down to find the handy position.

◆ After finding the up and down position, turn the grip slide holder clockwise at the bottom and fix it.

Fixing Release

Up and Down about 100mm

Fixing◆ If all the positions are fixed for user’s convenience, put up the navigation/the cell phone slowly with its top part against the rubber grip and install it. Up and Down

about 10mm

◆ In the case of installing on the speaker hole or the curved place, attach first the enclosed metal plate 3M taped, and install the suction plate on the metal plate. You can see the same effect.

◆ Push the body slide button again, and push the grip into the body.

-4-

How to Use the Product and Cautions

1. Cradle Suction

1-1 After checking the place on the dashboard for attaching cradle, and wipe cleanly with a wet cloth or a wipe there.1-2 Remove the release paper from the cradle suction plate.

1-3 To attach the cradle suction plate on the dashboard, turn the suction plate holder clockwise with pressing the body strongly.1-4. If the suction plate holder has been turned to the end, check it to attach perfectly by pulling the body.

! Cautions1) In the case of a dust or a foreign body at the place to attach on the dashboard, it prevents the cradle from attaching perfectly.

2) If the place for attaching the cradle suction plate is not even or having a hole, suction will not be finished.

3) Adsorptive power is so strong, there can be indentation on the dashboard, but it will be removed when not in use.

2. Moving Grip Back and Forth

2-1 To move the grip back and forth, first push the body slide button to release the fixing of the body and the slide.2-2 With pushing the body slide button, set the holding grip where user wants by moving back and forth.2-3 If the grip is positioned where user wants, release the body slide button to fix.

! Cautions.

1) If the body slide button is not pushed, the grip will not move.

2) After releasing the body slide button, check the fixing by touching the grip.

4) Check the cradle is attached safely before driving, because the adsorptive power can be weakened if the suction plate has been left in a high or low temperature for a long time.5) Suction can not be made on the protruding part such as the speaker hole and the curved place.

-5-

How to Use the Product and Cautions

3. Adjustment of the Grip Angle

3-1 Turn the joint for fixing grip anticlockwise to release.

3-2 Take the navigation/the cell phone position for user’s convenience.

3-3 If user finds the right place, turn strongly the joint for fixing grip clockwise and fix not to move.! Cautio

ns1) If user don’t fix the grip by turning strongly joint for fixing grip, the navigation/the cell phone can be moved.2) User can also use the hex wrench to fix the joint for fixing grip.

3) If user spins the angle of the grip consistently, tightened part can come loose.

4. Movement of the grip up and down

4-1 Turn anticlockwise the grip slide holder at the bottom of the grip to release fixing.

4-2 After releasing, hold the body not to shake and move the grip softly up and down.

4-3 After setting the position of the grip, turn the grip slide holder clockwise and fix it not to move.! Cautio

ns1) If the grip slide holder doesn’t move easily, just move a little the grip up and down to be turned completely.2) If user moves the grip excessively under the grip holder fixed, the product can be damaged.3) In the case of driving with the grip holder unfixed, noise can be generated by moving.5. Navigation / Cell Phone

5-1 Grasp the navigation/the cell phone so as not to move the grip, and let its top part touch the rubber grip.5-2 Adding force slowly to the rubber grip direction, the rubber grip goes into the grip and then the navigation / the cell phone will reach in good condition.5-3 After installing the navigation/the cell phone, fix it in the best convenience and at the safe position by fine-tuning.! Cautio

ns1) The rubber grip can move about 10mm.

2) Please take notice, the product can fall off for the striking impact.

-6-

6. Maintain the Suction Plate

6-1 In the middle of use, if the adsorptive power weakens for the dust or the foreign body stuck on the suction plate, just clean it with a wet cloth or a wipe. After natural drying, the adsorptive power can be kept like the first time.

Product Configuration List

Navigation/ Cell Phone Cradle 1ea

Suction Compensation 3M double-sided tape 1ea, Suction Compensation Steel 1ea

hex wrench 1ea additional rubber for fixing

-7-

Suction Compensation Objects : a 3M double-sided tape and a steel will be delivered with being attached to the product.

3M

3M

3M3

M3M

3M

3M

3M3

M3M

3M

3M

3M3

M3M

3M

3M

3M

●  This product is manufactured under strict quality control and

inspection processes.

● When this product goes out of order under the normal use of

customer, we will repair it free of charge during the warranty

period.

● Please show us the warranty card when you ask for repair

service .

● Please keep the warranty card securely as it is not reissued.

Product Kropsson Cradle Model HR-N750 FTP

Date of Manufacture

year month day

Warranty Period

A year after date of purchase

Purchased from

Address

Date of Purchase

Name of Customer

Customer service : 2F, 100-16, Dodang-dong, Wonmi-gu, Bucheon-si, Gyeonggi-do, KoreaTel : + 82 + 32 - 684 – 0463~5 FAX : + 82 + 32 - 684 - 0467

Warranty