ktm metal seated ball valve

IntroductionKTM is a leading manufacturer of valvesand actuators. KTM valves are specifiedand operated in some of the world’s mostcritical and demanding applications.KTM’s Metaltite® family of valves aredesigned to provide solutions to specificoperating needs.

Precision lapping of ball to seat andhigh-precision machining result insuperior ball and seat interfacing for tightshutoff conforming to ANSI FCI 70-2Class V and Class VI.

Features• Superior quality and dependability -

We make sure the quality is built-in,beginning at our own foundries andthrough rigorous testing each step ofour fully integrated manufacturingprocess. Every KTM valve is serializedand comes with a complete set of milltest reports that ensures its quality —and guarantees its performance. Veryfew valve manufacturers can matchthis feature.

• Long life - Built rugged to withstandthe toughest operating conditions,KTM valves have a documentedhistory of long, uninterrupted service.

• Broad product range - We offer awide selection of specifications thatallow you to select the right valve tomeet the requirements of youroperating process.

• Availability - Historically designed ascustomized products to meet specificcustomer needs, our metal seatedvalves today are mass produced,which means they are available “off theshelf.” No long wait for delivery.

• Experience - KTM has been makingmetal seated valves for more than aquarter of a century. Our worldwideinstalled base is larger than that of any other supplier.

KTM Metaltite® Metal Seated Valves1/2” thru 20”

Tyco reserves the right to change product design and specifications KTMMC-0395-US-0208without notice. Copyright © 2002 by Tyco International Ltd. 1

Total Flow Control Solutions

Metal seated, tight shutoff valve, conforming to ANSI FCI 70-2 Class V and Class VI.

General applications• Clean Liquids

• Dirty Liquids

• High Viscosity

• Scaling Liquids

• Corrosive

• Erosive

• Waste Treatment

• Sludge

• Pulp Stock

• Saturated Steam

• Superheated Steam

• Wet Slurries:

- Pellets

- Monomers

- Abrasive

- Fibers

• Dry Slurries:

- Powder

- Polymer Fluff

- Pellets

• Clean Gasses

• Dirty Gasses

• High Temperature

• High Velocity

V-Port Valves for Dual Function,On/Off or ModulatingKTM’s Single V and Dual V are ruggeddual-function valves that can be used in On/Off applications as well asmodulating applications. These valvesare designed to provide solutions tospecific operating needs.

Single V Offers:• Shearing Action

• Low Torque

• Upstream Single-Seat TrunnionDesign

• Non-clogging

• 100:1 Rangeability

• No Body Cavity

• No downstream seat allows media toflow freely and smoothly, preventingbuildup

• Rugged Split-Body Design

• Adjustable Gland Packing

• Inherently Fire-Safe Design

• Anti-Static Grounding Device

• Blowout Proof Stem

Dual V Offers:• Shearing Action

• Low Torque

• Upstream Single-Seat TrunnionDesign

• Non-clogging

• 250:1 Rangeability

• No Body Cavity

• No downstream seat allows media toflow freely and smoothly, preventingbuildup

• Compact Unibody Design

• Class V Shutoff

• Integral ISO Mounting Pad

• Easy Installation, Versatile EndConnections




• Flanged and Wafer Designs


Omni and Y-Pattern Valves forOn/Off ApplicationsKTM’s Omni family of valves areunmatched in general-purpose On/Offapplications. Our Y-Pattern valve addsdependable diverter capabilities whereoperations require them.

Omni II Offers:• Fugitive Emission Control

• Integral ISO Mounting Pad


• Live-Loaded Adjustable Gland Packing




• Radial Thrust Bearing

Trunnion Offers:• Double Block and Bleed

• True Trunnion Design


• Integral Mounting Pad


• Low Torque



• Powder Guard Feature


Y-Pattern Offers:• Slurry Diverter Service

• Minimum Body Cavity

• Polished Bore

• 135° Operation

• Piggability

• Top Entry





• No mixing of media when changingflow


Tyco reserves the right to change product design and specifications KTMMC-0395without notice. Copyright © 2002 by Tyco International Ltd. 2

Specifications



Valve Type: Single VModel No.: (WO 400/600)

Seat Design/ A-1/Class IVSeal Class A-2/Class II

Characteristics:Temp -20°F to 482°F, Single seat Uni-directional Trunnion Design ANSI 150/300, 1” - 20”Modulating, On/Off

Valve Selection - Seat Designs

Valve Type: Dual VModel No.: (WA Series)

Seat Design/Seal Class: B/Class V

Characteristics:Temp -20°F to 518°F, Single seatUni-directional Trunnion DesignANSI 150/300, 1” - 8”Modulating, On/Off

Valve Type: OMNI IIModel No.: (EB100)

Seat Design/Seal Class: C/Class V

Characteristics:Temp -20°F to 932°F, Two seatsBi-directional Floating DesignANSI 150/300, 1/2” - 8”On/Off

Valve Type:TrunnionModel No.: (EO1200)

Seat Design/ D/Class VSeal Class E/Class V

F/Class VG/Class V

Characteristics:Temp -20°F to 932°F, Two seatsBi-directional or Single seatUni-directional Trunnion DesignANSI 150/300, 2” - 20”ANSI 600, 2” - 16”On/Off

Valve Type:Y-Pattern DiverterModel No.: (E3700)

Seat Design/Seal Class: H/Class V

Characteristics:Temp -20°F to 482°F, Three seatsTrunnion DesignANSI 150/300, 1” - 12”ANSI 600, 1” - 3”Diverting

Class IV, Laminated seat Class II, Thick seat

Class V, Spring loaded stellited seat

Bi-directional: Preferred flow is cap to body.

Scraper type with powder guard seals max. temp. 482°F

Standard type max. temp. 482°F

C-1 C-2

B

A-1 A-2

D-D6” thru 20”

E-E2” thru 4”

F-F6” thru 20”

G-G

High temperature applications max. temp. 932°F

H

Same seat applies to both sides.

ANSI TitleB16.5 Steel pipe flanges and flanged fittingsB16.10 Face-to-face and end-to-end dimensions of valvesB16.34 Valves — flanged, threaded and welded endB16.25 Butt-welding endsFCI 70-2 Control valve seat leakage

API Title6D Pipeline valve specifications598 Valve inspection and test607 Fire Test for soft-seated valves (Fourth Edition) and EXES 3-14-1-2ARP6F Fire Test for valves6FA Fire Test for valves608 Metal ball valves — flanged and butt-welding ends

MSS TitleSP-6 Standard finishes for contact faces of pipe flanges and connecting-end flanges of valves and fittingsSP-25 Standard marking system for valves, fittings, flanges and unionsSP-55 Quality standard for steel castings for valves, flanges and fittings (Visual method)SP-61 Pressure testing of steel valvesSP-72 Ball valves with flanged or butt-welding ends for general services

NACEMR-01-75 Sulfide stress-cracking-resistant metallic materials for oil field equipment

BS5351 Steel ball valve for the petroleum, petrochemical and allied industries 5146 Inspection and testing

KTM Warranty: All KTM products are guaranteed against defects in material and workmanship for a period of one year from shipping date. All metals and resilient synthetics are guaranteed to be of thematerial specified. This warranty is limited to the furnishing of replacements found defective by KTM and does not extend to claims for any labor, consequential damages, downtime or any other loss,damage or expense of any kind arising out of the defect. We do not allow claims for unauthorized repairs, labor or material. Purchasers are expected to make their own judgment to determine thesuitability of these products for their particular purposes. This warranty does not apply to products manufactured by others. The foregoing is the only warranty and no other is expressed or implied.Change of Design: We reserve the right to discontinue the manufacture of, or change or modify the design and construction of, any KTM product, in due course of our manufacturing procedure, withoutincurring any obligation to accept for credit, to replace or furnish or install such changes or modifications on products previously or subsequently sold.

American National Standards Institute (ANSI)

American Petroleum Institute (API)

International Organization for Standardization (ISO)

Oil Companies Material Association (OCMA)

Lloyd’s Register of Shipping

National Association of Corrosion Engineers (NACE)

Chlorine Institute (CI)

Manufacturers Standardization Society (MSS)

American Bureau of Shipping (ABS)

Bureau Veritas

British Standards Institute (BSI)

Provincial Boiler Inspection Department (Canada)

Japan Industrial Standards (JIS)

Deutsche Institut Für Normung (DIN)

TÜV Rheinland Register (West German InspectionOrganization)

Approvals, Acceptance and Listings

Details of additional acceptance of KTM products with other organizations are available upon request.

KTM Ball Valves are manufactured in strict accordance with worldwide industry standards.



The data presented in this bulletin is for general information only. Manufacturer is not responsible for acceptability of these products in relation to system requirements. Patents and PatentsPending in U.S. and foreign countries. All rights reserved. Printed in U.S.A. Tyco reserves the right to change product design and specifications without notice. © Copyright 2002.

Valves & Controls

www.tycovalves.com

Factory Phone: 713-744-4532

ktm metal seated ball valve

Documents