ktz
DESCRIPTION
KTZ pumpTRANSCRIPT
Tsurumi KTZMedium-duty drainage pumps - for professional use
Pumped water cools the motor and dischargesas illustrated. The motor can be cooled even
when pumping a small amount of water. The topdischarge arrangement allows access into areas
with space limitations.The pump can be run continuously in air.
2850 r.p.m.
2850 r.p.m.
400V50Hz
Generally applicable highgrade pump that canbe used efficiently in draining in civilengineering through to deepwell applications.
Incorporating on the job requirements in theinitial product design, Tsurumi has built apowerful new series of pumps to match thedemands of tough drainage jobs.
In the event of abrasive and corrosive utilization, stronger wear and tear will take place naturally in certain components. In this regard, please pay attention to our websitewww.tsurumi-europe.com/english/applications.htm.
DescriptionsCabtyre CableStuffing BoxPump CasingImpellerSuction CoverStrainer StandMechanical SealOil SealOil RingHose CouplingOil PlugLubricantMotor Bracket
RuggedBy offering a cast iron pump body, our durability is increased over standard aluminiumbody pumps.Within each motor size there is a choice between high head and high volumeperformance ranges.
Efficient motor coolingSlim line design with a top discharge offers economy of space. There is efficient motorcooling through a side flow channel.
Increased water-pressure resistanceA newly developed mechanical seal endures water pressure of up to 5 kgf/cm2
(0,49MPa/cm2). This has made our KTZsubmersible pumps usable at greater depth,such as in deep wells, to say nothing of useat general construction sites.
No.52A52B53545556606468
DescriptionsUpper BearingLower BearingMotor ProtectorShaftRotorStatorBearing HousingMotor FrameHandle
No.162021222325263032353650
In the event of abrasive and corrosive utilization, stronger wear and tear will take place naturally in certain components. In this regard, please pay attention to our websitewww.tsurumi-europe.com/english/applications.htm.
2850 r.p.m. 2850 r.p.m.
Standard Accessories:
• 1 Cable 20m• 1 Threaded flange
Discharge bore mm
PumpingFluid
Pump
Type of Fluid
Liquid Temperature
Compo-nents
ImpellerShaft Seal
Bearing
Material
Impeller
Shaft Seal(mechanical Seal)
Suction Cover
50 80 100 150
Spring water,Rain water, Groundwater, Sand carrying water
0 - 40°C
Open typeDouble mechanical sealShielded ball bearingsChromium iron casting
Ductile iron casting
Silicon carbide in oil bath
Motor
Type, Poles
Insulation
Phase / VoltageMotor Protector (built-in)
LubricantFrameShaft
Cable
Material
Discharge Connection
Dry-type submersible induction motor, 2 poles
Insulation class F
3-phase / 400V / direct on line
Circle thermal cut-outTurbine oil (ISO VG32)Grey iron castingStainless steel EN-X30Cr13
Rubber, H07RN-F
Threaded flange
Casing Grey iron casting
KTZ
Specifications:
Model
KTZ21.5-51KTZ31.5-51KTZ22.2-51KTZ32.2-51KTZ23.7-52KTZ33.7-52KTZ43.7-52KTZ35.5-51KTZ45.5-51KTZ47.5-51KTZ67.5-51KTZ411-51KTZ611-51
Motoroutput
kW1,51,52,22,23,73,73,75,55,57,57,51111
Ratedcurrent
A3,53,55,05,07,77,77,711,411,415,015,022,022,0
Headmax.
m21,514,426,020,436,529,018,032,022,540,031,048,532,5
Capacitymax.l/min430670500800450900
1440110017501400204014402440
Dry weight of the pump without cable
Dryweight
kg30303434
62,562,562,58282
105107133136
Max.solid
handlingmm8,58,58,58,58,58,58,5101012201220
Boremm
508050805080
10080
100100150100150
Ein-tauch-tiefe
max. m50505050505050505050505050
GG20 / EN-GJL-200
Chromium Cast Iron HiCrFCCast Iron
415 - 425125 - 205
Brinell hardness
150 - 230GGG50 / EN-GJS-500-7 150 - 220
GG15 / EN-GJL-150
In the event of abrasive and corrosive utilization, stronger wear and tear will take place naturally in certain components. In this regard, please pay attention to our websitewww.tsurumi-europe.com/english/applications.htm.
Your DealerTsurumi (Europe) GmbHHeltorfer Straße 14D-40472 DüsseldorfTel.: +49-211-4179373Fax: +49-211-4791429Email: [email protected]
Cat
.-no
. K
TZ
-E-0
6/08
We reserve the right to change specifications and designs herein for improvement without prior notice. Our pumps are for professional use only. In the event thatTsurumi (Europe) GmbH have, in exceptional cases taken over, a manufacturer’s warranty, this entitles the end-user to assert remedy free of charge against Tsurumi(Europe) GmbH due to any defect to the product occurring during the guarantee period (see below), also then when the warranty claims against the seller do not orno longer exist. In the event of malfunction, which is attributable to the improper handling by the enduser, no guarantee claim shall arise. Further claims shall not
result from the warranty, unless if something to the contrary has explicitly been determined. The decision as to whether remedy is effected by way of replacement orrepair shall be at the choice of Tsurumi (Europe) GmbH. The claims shall be time barred after a period of three months after expiry of the guarantee period, however,not before expiry of the warranty period which is valid towards the seller. In the event of doubt, the warranty period shall correspond with the warranty period which
is valid between the end-user and his seller.
CWL: continuous running water level
CWL CWL
1,5kW - 5,5kW 7,5kW - 11kW
Dimensions: in mm
A235235235235283283283306306330330373373
A1173173173173208208208218218240240260260
B509509529529627627642671686764799806826
B1401401421421504504504548548626626645645
D216216216216252252252259259314314350350
H478478498498637637637688688687687740740
W1120120120120150150150150150190190190190
Model KTZ21.5-51KTZ31.5-51KTZ22.2-51KTZ32.2-51KTZ23.7-52KTZ33.7-52KTZ43.7-52KTZ35.5-51KTZ45.5-51KTZ47.5-51KTZ67.5-51KTZ411-51KTZ611-51