Kverneland Rigid Power Harrow

H series

0 series production in Q1_2016

30 units available (3 & 4m)

2400 series 2500 series 3000 series 4000 series 4062C 50902400 series 2500 series 3000 series 4000 series 4062C 5090NG-M NG-S F35NG-H

91150C

NG-S

• Many well-proven features from NG-H and NG-S 101 have been brought into this new H series

• New look, less weight, less maintenance and simpler adjustments

H series – For tractors up to 180hp

2400 series 2500 series 3000 series 4000 series 4062C 50902400 series 2500 series 3000 series 4000 series 4062C 5090NG-M NG-S F35NG-H

91150C

NG-S

• Tough headstock – lighter than previous NG-H 101 model (in 3m -55kg on base machine)

• Standard connection for hydrolift and Accord triangle and all KV integrated seeders

• Cat. II or Cat. III tractor connections. Oscillating lower link arms

H series – Headstock

2400 series 2500 series 3000 series 4000 series 4062C 50902400 series 2500 series 3000 series 4000 series 4062C 5090NG-M NG-S F35NG-H

91150C

NG-S

•25 cm rotor distance

•Helical positioning of tines

•Improved performance

•Improved levelling

•Lower power requirement

•Safes fuel, lower cost per

hectare

H series – Trough transmission concept

2400 series 2500 series 3000 series 4000 series 4062C 50902400 series 2500 series 3000 series 4000 series 4062C 5090NG-M NG-S F35NG-H

91150C

NG-S

Height of gears 40mm

Ø of shaft 45/50mm

Conical bearing, int. Ø 50mm, outer Ø 100mm

Conical bearing int. Ø 45mm, outer Ø 85mm

Distance of bearings 55mm midth - midth

Trough 6mm special profile

Cassette sealing

Tine holder bolted to the trough, gives easy access to the seals

Cone housing welded to trough

H series – Trough

Double body trough all length welded

Quick Fit tines as standard

2400 series 2500 series 3000 series 4000 series 4062C 50902400 series 2500 series 3000 series 4000 series 4062C 5090NG-M NG-S F35NG-H

91150C

NG-S

• Self supporting structure

• Conical bearing system

• High rigidity even when loaded

• Quick Fit Tines

• Simple clear design

• Easy and low maintenance

H series – Trough key points

2400 series 2500 series 3000 series 4000 series 4062C 50902400 series 2500 series 3000 series 4000 series 4062C 5090NG-M NG-S F35NG-H

91150C

NG-S

• Allows residues and stones

to pass through easily

• Especially in combination

with active tines

• Gives easy access to

change the tines

High Clearance of 95mm

with the following benefits:

95mm

H series – Rotor Clearance

2400 series 2500 series 3000 series 4000 series 4062C 50902400 series 2500 series 3000 series 4000 series 4062C 5090NG-M NG-S F35NG-H

91150C

NG-S

Wide tine holder• Reduces stress and wear of tines

and tines pocket

• Tines are fixed by pin and clip (Quick fit system standard offer)

• No tools necessary to change tines

Pins fixed at top and bottom:• No bending, no stress on the clip

H series – Quick Fit Tines

• Different type of tines; standard shape, positive angle and carbide treated for longer working life (always 320x15mm)

2400 series 2500 series 3000 series 4000 series 4062C 50902400 series 2500 series 3000 series 4000 series 4062C 5090NG-M NG-S F35NG-H

91150C

NG-S

H series – Driveline

• PTO shaft (GKN) with automatic clutch to prevent gearbox overload

• Gearbox with change gears; pto input at 1000rpm for a rotors output of 336rpm

• Different gearset possibilities (option) for 290, 360 and 450rpm rotor

• Always with rear pto shaft for seeders connections

• Compact design and maximum reliability

2400 series 2500 series 3000 series 4000 series 4062C 50902400 series 2500 series 3000 series 4000 series 4062C 5090NG-M NG-S F35NG-H

91150C

NG-S

• Side deflector falls down under 3m working width

• Spring loaded security• Possibility to move up and

downwards to follow the ground contours

• Flexible to open sideways to prevent stones and big clods from being trapped

• Optimum soil flow, no ridges during work

H series – Side deflector

2400 series 2500 series 3000 series 4000 series 4062C 50902400 series 2500 series 3000 series 4000 series 4062C 5090NG-M NG-S F35NG-H

91150C

NG-S

• Depth adjustment moved closer to

the side for better ergonomic and

simpler and safer adjustments

• Design with square pin to reduce

wearing and facilitate changes

• 18 different pin slot for several

working depth adjustments with all

roller types• Reinforced roller arms to improve

stability with heavy rollers and seeders

H series– Depth adjustment

2400 series 2500 series 3000 series 4000 series 4062C 50902400 series 2500 series 3000 series 4000 series 4062C 5090NG-M NG-S F35NG-H

91150C

NG-S

H series – Technical dataTechnical Data H series

Working width (m) 3,00 3,50 4,00

Transport width (m) 3,00 3,50 4,00

pto - input speed (rpm) 1000

Rotor Speed (rpm) 336 std. (290, 360 and 450 optional)

Minimum hp requirement 80 90 100

Maximum hp allowed 180

Gearbox overload protection 2200 Nm per lateral drive_automatic clutch

Number of rotors 12 14 16

Number of tines 24 28 32

Tine dimension (mm) 15 x 320

Tines fitment Quick fit as standard

Weight with Packer Roller 500mm (kg) 1590 1770 1920

Working depth adjustement Mechanical by pins

2400 series 2500 series 3000 series 4000 series 4062C 50902400 series 2500 series 3000 series 4000 series 4062C 5090NG-M NG-S F35NG-H

91150C

NG-S

• Infinite adjustable via spindle • Spring loaded to prevent

overload• Strong bracket with 4 bolts• Negative angle for a better soil

flow• Scale for better alignment of

each side

H series – Levelling bar

2400 series 2500 series 3000 series 4000 series 4062C 50902400 series 2500 series 3000 series 4000 series 4062C 5090NG-M NG-S F35NG-H

91150C

NG-S

• Possibility to fit wide range of roller types due to get optimum performances in all soil conditions

• Tooth packer 575mm (new design), cracker packer, actipack, flexline and cage roller

• Standardised main frame for mounting on all PH range

• New generation of roller bearing maintenance free

H series – Rollers

2400 series 2500 series 3000 series 4000 series 4062C 50902400 series 2500 series 3000 series 4000 series 4062C 5090NG-M NG-S F35NG-H

91150C

NG-S

H series – Main arguments

• Clear and tidy design but robust and well tested main frame and transmission (40 years experiences)

• Self supporting trough with welded rotor cone – higher rigidity

• Quick Fit tines as a standard• Double conical bearings. 95mm

clearance• Perfect adaptability to all types of

Kverneland seeders• Complete choice of rollers types to get

best performances in all soil conditions• Excellence soil preparation trough

rotors every 25cm and helical tines placements