l arge g roup m anufacturers u pdate l arge g roup m anufacturers u pdate a ustin, tx s aturday –...
TRANSCRIPT
LARGE GROUPMANUFACTURERS UPDATE
LARGE GROUPMANUFACTURERS UPDATE
AUSTIN, TX SATURDAY – APRIL 12, 2014
10:00 A.M. – 12:00 P.M.
AUSTIN, TX SATURDAY – APRIL 12, 2014
10:00 A.M. – 12:00 P.M.
WEB SITEWEB SITE
800-328-3352 - Live Operator 888-4-NuAire, (888-468-2473)
Enter Ext. Walt Johnson – 241 (Part-time) Jim McGowan - 256 Joe Bartee - 283 Greg Garelik - 239 Al Newton – 274 Steve Winget – 523 Adam Christensen-527 Jack Orloff - 255
Fax Number 763-432 4006
NUAIRE PHONE NUMBERSNUAIRE PHONE NUMBERS
Standard Airflow Products 36 Months A2/B1/B2 models w/DC-ECM motor
60 Months Laminar
60 Months
Polypropylene Hoods / Casework 12 Months Special Products 12 Months
NEW PRODUCT WARRANTYNEW PRODUCT WARRANTY
18 9 1 7 6 0 1 1 4 0 4
UnitSpecific Number
MM/DD/YY
SERIAL NUMBER IDSERIAL NUMBER ID
Need NuAire Approval RG Number Defective Part Tag Decon Papers Promptly Return Parts
RETURN PARTSRETURN PARTS
April 28 – 30 Biological Safety Cabinets (3 Days)May 1 – 2 CO2 Incubators (2 Days)
5 Centrifuge (1 Day)6 Ultra Low Temperature Freezer (1 Day)
June 24 – 27 Advanced Biological Safety Cabinets (4 Days)June/July 30 – 1 Incubators (2 Days)July 2 Centrifuge (1 Day) August 18 – 20 Biological Safety Cabinets (3 Days)
21 – 22 CO2 Incubators (2 Days)25 Centrifuge (1 Day)26 Ultra Low Temperature Freezer (1 Day)
October 21 – 24 Advanced Biological Safety Cabinets (4 Days)
27 – 28 CO2 Incubators (2 Days)29 Centrifuge (1 Day)
2014 TRAINING CLASS SCHEDULE2014 TRAINING CLASS SCHEDULE
UV Ballast have changed through the years from vendor Prior to the fall of 2008 4 wire ballast 2008 to the fall of 2012 3 wire ballast 2012 to present 4 wire ballast
When replacing a UV Ballast for cabinets with a 3 wire ballast a decon will need to be performed since the current ballast is a 4 wire configuration.
UV BALLAST RETROFITSUV BALLAST RETROFITS
ECM 5.0 Genteq Motor 1450 RPM PWM (DC signal) varies the motor speed Motor Control, Monitors RPM and torque which delivers
constant air volume as HEPA Filters load
ELECTRONICALLY COMMUTATED MOTOR
ELECTRONICALLY COMMUTATED MOTOR
STB0187DC ECM MOTOR UPGRADE
STB0187DC ECM MOTOR UPGRADE
Converting a NU-425 Series 20 and newer from an AC to a DC Motor 115V (Standard)
All other BSC Models Series 20 and Newer are Specs
DC ECM CONTROL SYSTEM A2DC ECM CONTROL SYSTEM A2
NU-425 – ES (Energy Saver) - Optional & Field Upgradeable NU-475, NU-629 – ES (Energy Saver) – Standard NU-201/301 (Energy Saver)
425/475/629 TYPE DC MOTORSPEED CONTROLLER SYSTEM
425/475/629 TYPE DC MOTORSPEED CONTROLLER SYSTEM
425 TYPE DC MOTORSPEED CONTROLLER SYSTEM
425 TYPE DC MOTORSPEED CONTROLLER SYSTEM
DC SPEED CONTROLLEROPTIONAL ON NU-425
DC SPEED CONTROLLEROPTIONAL ON NU-425
12 Volt DC Power supply Automatic Constant Airflow volume
Thru motor rpm feedback
Manual Airflow volume adjustment (POT) On-board jumper positions for correct cabinet size Speed Cont. locks in setting after 1 Minute idle or certifier sets
via push button & LED turns off
STB0245DESCRIPTION FOR MOTOR SPEED CONTROL
MODULE SOFTWARE - UPDATED VERSION 1.2.0008
STB0245DESCRIPTION FOR MOTOR SPEED CONTROL
MODULE SOFTWARE - UPDATED VERSION 1.2.0008
GENERAL AIRFLOW BOARD (GAFII)GENERAL AIRFLOW BOARD (GAFII)
NU-437, NU-477, NU-677 (A2) – ES (Energy) -Saver Standard GAF also used in NU-813, NU-126, NU-619 and all Isolators
AC Motor Output: Older Series NU-437 AC Impeller Output: Older Series NU-813, NU-126, NU-619
and Isolators DC ECM Motor Output: Std. on Current NU-437, NU-477,
and NU-677 DC EC Impeller Output: Std. on All Isolators
(S-10^) NR/NTE/PR; NU-813, NU-126, NU-619 Latest Software Release (Rev 1.6.0001), GAFII
Corrects increase motor speed (PWM signal) due to site specific events, (i.e. power fluctuations, frequent on/off cycles)
STB0202: RF Upgrade Installation Instructions
GAF CONTOR BOARDMULTIPLE BLOWER CONTROLS
GAF CONTOR BOARDMULTIPLE BLOWER CONTROLS
PTB0202GENERAL AIR FLOW (GAF)
SOFTWARE UPDATED INSTRUCTIONS FORMODELS NU-437 (SERIES 60 OR HIGHER)
PTB0202GENERAL AIR FLOW (GAF)
SOFTWARE UPDATED INSTRUCTIONS FORMODELS NU-437 (SERIES 60 OR HIGHER)
PTB0202GENERAL AIR FLOW (GAF)
SOFTWARE UPDATED INSTRUCTIONS FORMODELS NU-437 (SERIES 60 OR HIGHER)
PTB0202GENERAL AIR FLOW (GAF)
SOFTWARE UPDATED INSTRUCTIONS FORMODELS NU-437 (SERIES 60 OR HIGHER)
PTB0202GENERAL AIR FLOW (GAF)
SOFTWARE UPDATED INSTRUCTIONS FORMODELS NU-437 (SERIES 60 OR HIGHER)
PTB0202GENERAL AIR FLOW (GAF)
SOFTWARE UPDATED INSTRUCTIONS FORMODELS NU-437 (SERIES 60 OR HIGHER)
FLOWGARD ORDIGITAL MANOMETER REPLACEMENT
RF458 (437) / RF562 (797)
FLOWGARD ORDIGITAL MANOMETER REPLACEMENT
RF458 (437) / RF562 (797)
Previous 2012 & Newer
RF Kits include STB0153 and adaptor tubing
Replacement of GAF II Beginning in second half of 2014 Same basic design updated electronics Included FlowGard Monitor onto control board
GENERAL AIRFLOW BOARD(GAF III)
GENERAL AIRFLOW BOARD(GAF III)
GENERAL AIRFLOW BOARD(GAF III)
GENERAL AIRFLOW BOARD(GAF III)
TOUCHLINKELECTRONIC CONTROL SYSTEM
TOUCHLINKELECTRONIC CONTROL SYSTEM
STB0248REPLACEMENT OF THE DIGITAL
VELOCITY SENSOR
STB0248REPLACEMENT OF THE DIGITAL
VELOCITY SENSOR
STB0248REPLACEMENT OF THE DIGITAL
VELOCITY SENSOR
STB0248REPLACEMENT OF THE DIGITAL
VELOCITY SENSOR
STB0248REPLACEMENT OF THE DIGITAL
VELOCITY SENSOR
STB0248REPLACEMENT OF THE DIGITAL
VELOCITY SENSOR
STB0248REPLACEMENT OF THE DIGITAL
VELOCITY SENSOR
STB0248REPLACEMENT OF THE DIGITAL
VELOCITY SENSOR
STB0248REPLACEMENT OF THE DIGITAL
VELOCITY SENSOR
STB0248REPLACEMENT OF THE DIGITAL
VELOCITY SENSOR
STB0248REPLACEMENT OF THE DIGITAL
VELOCITY SENSOR
STB0248REPLACEMENT OF THE DIGITAL
VELOCITY SENSOR
STB0248REPLACEMENT OF THE DIGITAL
VELOCITY SENSOR
STB0248REPLACEMENT OF THE DIGITAL
VELOCITY SENSOR
STB0248REPLACEMENT OF THE DIGITAL
VELOCITY SENSOR
STB0248REPLACEMENT OF THE DIGITAL
VELOCITY SENSOR
STB0248REPLACEMENT OF THE DIGITAL
VELOCITY SENSOR
STB0248REPLACEMENT OF THE DIGITAL
VELOCITY SENSOR
STB0248REPLACEMENT OF THE DIGITAL
VELOCITY SENSOR
STB0248REPLACEMENT OF THE DIGITAL
VELOCITY SENSOR
STB0248REPLACEMENT OF THE DIGITAL
VELOCITY SENSOR
STB0248REPLACEMENT OF THE DIGITAL
VELOCITY SENSOR
STB0248REPLACEMENT OF THE DIGITAL
VELOCITY SENSOR
STB0248REPLACEMENT OF THE DIGITAL
VELOCITY SENSOR
STB0248REPLACEMENT OF THE DIGITAL
VELOCITY SENSOR
STB0248REPLACEMENT OF THE DIGITAL
VELOCITY SENSOR
STB0248REPLACEMENT OF THE DIGITAL
VELOCITY SENSOR
STB0248REPLACEMENT OF THE DIGITAL
VELOCITY SENSOR
STB0248REPLACEMENT OF THE DIGITAL
VELOCITY SENSOR
STB0248REPLACEMENT OF THE DIGITAL
VELOCITY SENSOR
B2 – NU- 430 / NU- 435 / NU- 427EXHAUST AIRFLOW PRESSURE GRIDB2 – NU- 430 / NU- 435 / NU- 427
EXHAUST AIRFLOW PRESSURE GRID
Uses Static Pressure, Velocity Pressure and Temperature to measure airflow volume
Option for 8”, 10”, 12”, and 14” duct Option 8”, 10”, and 12” window access Master Reset reverts back to default setting. Optional selections
would need to be re-entered.
PTB0237 – TOUCHLINK DOWNLOADWITH USB FLASH DRIVE
PTB0237 – TOUCHLINK DOWNLOADWITH USB FLASH DRIVE
UPGRADING
SOFTWARE
PLUG THUMB DRIVE INTOUSB PORT
PLUG THUMB DRIVE INTOUSB PORT
USB SCREEN ONCE DRIVERPRESENCE IS DETECTED
USB SCREEN ONCE DRIVERPRESENCE IS DETECTED
READY TO STARTPROGRAMMING THE NXP
READY TO STARTPROGRAMMING THE NXP
NXP PROGRAMMINGCOMPLETED SUCCESSFULLY
NXP PROGRAMMINGCOMPLETED SUCCESSFULLY
PTB0240 – TOUCHLINK DOWNLOADWITH USB FLASH DRIVE
PTB0240 – TOUCHLINK DOWNLOADWITH USB FLASH DRIVE
HISTORY
PERFORMANCE
USB SCREEN ONCE DRIVERPRESENCE IS DETECTED
USB SCREEN ONCE DRIVERPRESENCE IS DETECTED
MESSAGE WHILE UPLOADINGPERFORMANCE DATA
MESSAGE WHILE UPLOADINGPERFORMANCE DATA
MESSAGE ON COMPLETIONOF DATA UPLOAD
MESSAGE ON COMPLETIONOF DATA UPLOAD
CABINET DATA FORMATTEDINTO EXCEL
CABINET DATA FORMATTEDINTO EXCEL
BACNET BACNET
BACnet
A Data Communication Protocol forBuilding Automation and Control Networks BACnet is a ANSI, EN, ISO global standard Addresses both hardware and software applications Provides method to share information
TOUCHLINK 2012 UPDATEINSTALL BACNET DAUGHTER BOARD
TOUCHLINK 2012 UPDATEINSTALL BACNET DAUGHTER BOARD
PC
BSC BSC BSC
TOUCHLINK 2012 UPDATE Ethernet CONNECTION to BUILDING
AUTOMATION SYSTEM
TOUCHLINK 2012 UPDATE Ethernet CONNECTION to BUILDING
AUTOMATION SYSTEM
STB0115BSC ALTERNATE INFLOW MEASUREMENT METHOD
STB0115BSC ALTERNATE INFLOW MEASUREMENT METHOD
STB0115BSC ALTERNATE INFLOW MEASUREMENT METHOD
STB0115BSC ALTERNATE INFLOW MEASUREMENT METHOD
DIGITAL MONOMETER RETROFITVACS REPLACEMENT INSTALL
DIGITAL MONOMETER RETROFITVACS REPLACEMENT INSTALL
CLASS II TYPE A2CANOPY EXHAUST TRANSITIONS
CLASS II TYPE A2CANOPY EXHAUST TRANSITIONS
CANOPY EXHAUST TRANSITIONSAND MONITORS
CANOPY EXHAUST TRANSITIONSAND MONITORS
Traditional Fixed Flow (Low Profile) NU-906 / 907 / 908 (NU-475 / 477 / 480 / 481) NU-916 / 917 / 918 (NU-425 / 437 / 440) NU-926 / 927 / 928 (NU-407 / 602)
Monitors AIN – 200 – 813/126 AIN-315 (A2) AIN – 335 (Fume Hoods) Poly AIN – 350 CEM NU-956 – FlowGard Pressure NU-948 – Digital Pressure
New Variable Flow (Monitor Included) NU-911 (NU-475 / 477 / 480 / 481) NU-921 (NU-425 / 437 / 440)
BSC UPDATESBSC UPDATES
Fixed Range Low Profile Transition
NU-911/921 VFC TRANSITIONSTECH BULLETINS
NU-911/921 VFC TRANSITIONSTECH BULLETINS
VARIABLE FLOW CANOPY (VFC)VARIABLE FLOW CANOPY (VFC)
Low profile (5” housing, 8½” overall) Built-in low airflow alarm Variable air gap range (25 to 250cfm)
VFC FUNCTION / OPTIONSVFC FUNCTION / OPTIONS
Note: VFC Setup adjustment should be made with cabinet set atnominal airflows
1. Adjust slide plates and/or exhaust volume desired so average velocity measured in the center of the (3) test points of either side is between 150fpm (.76mps) and 550fpm (2.8mps)
2. Verify containment with the capture of smoke
3. Verify low exhaust alarm with loss of smoke capture with in 15 seconds
VFC SETUP INSTRUCTIONSVFC SETUP INSTRUCTIONS
VFC INTERFACE / SERVICEVFC INTERFACE / SERVICE
Alarm contacts Audible alarm silence contacts Front panel access for filter testing Remote Panel
Improved bag-in/bag-out designSingle port filter releaseSealed contaminated chamber
Optional double exhaust HEPA Filter design
NU-813 SERIES 30 UPDATENU-813 SERIES 30 UPDATE
New DesignWindow ramsWindow switchFold down control box Improved BIBO system with chain rackBag to keep powders from clean side of HEPAEC ImpellerDouble HEPA optionWaste chute optionOutlet option
NU-813NU-813
NU-813NEW CONTROL BOX
NU-813NEW CONTROL BOX
NU-813WINDOW SWITCH AND RAM
NU-813WINDOW SWITCH AND RAM
NU-813NU-813
NU-813NU-813
NU-813 WASTE CHUTE
NU-813 WASTE CHUTE
NU-813NU-813
NU-813 HEPEX BARRIER
NU-813 HEPEX BARRIER
LAMINAR AIRFLOW CABINETS &SAFETY ENCLOSURES
LAMINAR AIRFLOW CABINETS &SAFETY ENCLOSURES
NU-201 / NU-301 UPDATESNU-201 / NU-301 UPDATES
Worksurface Improvements PVC Core Laminate or SST Full Stainless Steel (Option)
GMP ApplicationsBase is PVC core with w/SST
Standard EC Motor Energy Savings Lowered Noise
UV Curtain Interlock
HORIZONTAL CLEAN WORK STATIONHORIZONTAL CLEAN WORK STATION
Product Protection NU-201 and NU-301
Standard EC Motor Energy Savings Lowered Noise
UV Curtain Interlock
NU-201 / NU-301 UPDATESNU-201 / NU-301 UPDATES
Channel for vinyl curtain Secured under worksurface with Magnets Magnetic switch interlock
Curtain must be closed for light to operate
Must block 100% of UV light
NU-201 / NU-301 UV INTERLOCKNU-201 / NU-301 UV INTERLOCK
NU-201 / NU-301 UV INTERLOCKNU-201 / NU-301 UV INTERLOCK
NU-201 / NU-301 UV INTERLOCKNU-201 / NU-301 UV INTERLOCK
NU-201 / NU-301 UV INTERLOCKNU-201 / NU-301 UV INTERLOCK
NU-201 / NU-301 UV INTERLOCKNU-201 / NU-301 UV INTERLOCK
NU-612 / 617 / 619SMALL ANIMAL
CAGE CHANGING STATIONS
NU-612 / 617 / 619SMALL ANIMAL
CAGE CHANGING STATIONS
NU-612 / 617 / 619 PREVENTATIVEMAINTENANCE CHECKLIST
NU-612 / 617 / 619 PREVENTATIVEMAINTENANCE CHECKLIST
612 / 617 Check caster for tightness to block Check screws in block for tightness
619 – Stem Caster Check caster for tightness to adaptor
619 – Plate Caster Each caster is secured with 4 bolts, washers, and lock
washers
CAGE CHANGING STATION PREVENTATIVE MAINTENANCE
CAGE CHANGING STATION PREVENTATIVE MAINTENANCE
STB0185 / STB0214NU-612 / 617 / 619
PREVENTATIVE MAINTENANCE CASTER INSPECTION
STB0185 / STB0214NU-612 / 617 / 619
PREVENTATIVE MAINTENANCE CASTER INSPECTION
STB0185NU-612/617
CASTER FAILURES
STB0185NU-612/617
CASTER FAILURES
STB0185 / STB0214NU-612 / 617 / 619
P.M.C.I.
STB0185 / STB0214NU-612 / 617 / 619
P.M.C.I.
STB0219 – NU-619CASTER MOUNTING UPGRADE
STB0219 – NU-619CASTER MOUNTING UPGRADE
New Spill Tray (Baffle) Airflows adjusted
Supply Lowered Exhaust Increased
Better containment Improved performance during
smoke test
NU-619NU-619
NU-677NU-677
The NU-677 replaced the NU-629 Equipped with pre-filtration to prevent hair,
dander and bedding materials from blocking filters – prop up work tray for easy cleaning
NU-677-400/500/600 NSF listed @ 12” access
NU-677NU-677
PHARMAGARDPHARMAGARD
PR-797 – Inspect outer door hinge bolts for wear during normal certification – replace as needed – STB0191
NuAire provides replacement bolts at No Charge – RF525 – keep some in your stock
NU-PR797NU-PR797
New Design Remove pressure switch The NO and COM contacts of the alar monitor are wired directly to
P27 contacts 1 and 2 of the main control board. The supply blower(s) will shut off when the pressure in the main chamber is higher than -.03” w.g. (when alarm monitor is in alarm condition.)
New Digital Manometer (Series 12)
NU-NR797 SERIES 11NU-NR797 SERIES 11
STB0160 – NU-797ISOLATOR CHART
STB0160 – NU-797ISOLATOR CHART
NU-797NU-797
NU-797NU-797
NU-797NU-797
PTB0170 TouchLink Software Loading Procedure STB0185 NU-612/617 Preventive Maintenance STB0187 Convert NU-425 Series 20^ to DC ECM Motor STB0192 TouchLink, Master Reset Procedure STB0197 GAF Control Board Usage/Calibration STB0201/202 GAF Module Software Update (RF541)
TECHNICAL BULLETINS / RF KITSTECHNICAL BULLETINS / RF KITS
STB0204 DC ECM Speed Control Replacement (425 type)
STB0211 TouchLink Software Version 61N.138N (Older) STB0214 Preventative Maintenance Check List STB0219 619 Caster Upgrade STB0230 Update Software Version 61.37 (Current) STB0248 Digital Velocity Sensor Replacement
TECHNICAL BULLETINS / RF KITSTECHNICAL BULLETINS / RF KITS