l05 - advanced plc topics for micro800 controllers … · title: l05 - advanced plc topics for...
TRANSCRIPT
Copyright © 2014 Rockwell Automation, Inc. All Rights Reserved.
PUBLIC
PUBLIC - 5058-CO900G
L05 - Advanced PLC Topics For Micro800® Controllers
With Motion Capabilities And CIP Messaging Functionality
Hands-on Lab
Copyright © 2014 Rockwell Automation, Inc. All Rights Reserved.PUBLIC 2
Agenda
Hands-on Lab Introduction
Connected Components Accelerator Toolkit (CCAT)
Micro800 PTO Motion
What’s New - Connected Components Workbench Release 7.00
Micro800 Family
Copyright © 2014 Rockwell Automation, Inc. All Rights Reserved.PUBLIC
Micro800 Controller Family
3
Nano PLC Micro PLC
Micro810 Programmable relay replacer and timer
Micro820For simpler standalone machines and remote automation
Micro830For standalone machines with motionP
erf
orm
an
ce/F
eatu
res
Micro850For standalone machines with motion and more I/O and Ethernet connectivity
Local I/O
Analog I/O
Analog I/O
Each controller is cost and performance
optimized for specific applications
Copyright © 2014 Rockwell Automation, Inc. All Rights Reserved.PUBLIC 4
Agenda
Hands-on Lab Introduction
Connected Components Accelerator Toolkit (CCAT)
Micro800 PTO Motion
What’s New - Connected Components Workbench Release 7.00
Micro800 Family
Copyright © 2014 Rockwell Automation, Inc. All Rights Reserved.PUBLIC
What is new in Connected Components WorkbenchTM Release 7 (CCW R7)?
Automatic notification
Sample code and projects
Copyright © 2014 Rockwell Automation, Inc. All Rights Reserved.PUBLIC 6
Diagnose - Communication
The Diagnose button will be enabled only when connected to controller
Available for Serial and Ethernet communications
Copyright © 2014 Rockwell Automation, Inc. All Rights Reserved.PUBLIC
Data_Value_Upload_Download
7
Data value upload/download feature is only available in CCW R7 and works only with Micro820/830/850 controllers
During upload Project Values are always uploaded into the project
Note: If both Initial Value and Project Value exists, then initial value takes precedence.
Copyright © 2014 Rockwell Automation, Inc. All Rights Reserved.PUBLIC
Lost Project Scenario
8
Able to go directly to debug mode after discovery and upload the project from the controller without having to compile and re-download
Copyright © 2014 Rockwell Automation, Inc. All Rights Reserved.PUBLIC
Communication Timeout
9
User can set the timeout period to reduce the connection issues while connecting to the controller over VPN
Copyright © 2014 Rockwell Automation, Inc. All Rights Reserved.PUBLIC
Program Order Enhancement
10
“Drag and Drop” to change Program’s order The Program with any interrupt will move to the bottom automatically, and there is also a
special icon on it When the assigned interrupts are removed, the Program will be back to original position
Copyright © 2014 Rockwell Automation, Inc. All Rights Reserved.PUBLIC
Memory Usage
11
Easier to visualize program and data memory
Copyright © 2014 Rockwell Automation, Inc. All Rights Reserved.PUBLIC
Micro810_LCD_Variable
12
Use the LCD Variables View to select the variables to monitor using the Remote LCD
Copyright © 2014 Rockwell Automation, Inc. All Rights Reserved.PUBLIC
Data Protection (Micro830 & Micro850)
13
Protect a list of user-defined global variables that will retain their values when restoring a controller project from a memory module
Note: For more details check CCW Help
Copyright © 2014 Rockwell Automation, Inc. All Rights Reserved.PUBLIC
Variable Import/Export
14
Allows you to export or import variables to and from a Microsoft® Excel® spreadsheet Able to export and import local or global variables
Note: For more details check CCW Help
Copyright © 2014 Rockwell Automation, Inc. All Rights Reserved.PUBLIC
Ladder Editor
15
Uses space more efficiently
Copyright © 2014 Rockwell Automation, Inc. All Rights Reserved.PUBLIC
PanelViewTM Plus and OPC Support
16
PanelView Plus and OPC support using CIP Symbolic (instead of Modbus)
Browse native tags/variables in Micro800 controller from FT View Studio 8.0
OPC Server support with FT Gateway
Requires RSLinx® Enterprise 5.70.00 (CPR 9 SR7), same as in FT View Studio 8.0
Copyright © 2014 Rockwell Automation, Inc. All Rights Reserved.PUBLIC 17
Agenda
Hands-on Lab Introduction
Connected Components Accelerator Toolkit (CCAT)
Micro800 PTO Motion
What’s New - Connected Components Workbench Release 7.00
Micro800 Family
Copyright © 2014 Rockwell Automation, Inc. All Rights Reserved.PUBLIC
Basic Concept Of Pulse Train Outputs
18
Typically PTO Motion is for precise positioning applications that require
more flexibility than provided by Index Positioning
Also used for precise velocity control especially if position registration
is required. (Not used for torque control)
A pulse rotates the motor by a fractional amount (e.g. 1/2000 revolution)
Pulse Train Output (PTO)
- 24V
Direction
Pulse
Pulse1
Pulse2
Pulse3
Pulse4
PTO is low cost and good performance. Can be interfaced using low cost shielded wiring to any component servo drive.
Copyright © 2014 Rockwell Automation, Inc. All Rights Reserved.PUBLIC
PTO Type Of Motion Control
19
Motion planner in controller sends commands to Kinetix® 3 servo drive
Kinetix 3 servo drives sends power to the motor and receives feedback
from the encoder
Copyright © 2014 Rockwell Automation, Inc. All Rights Reserved.PUBLIC
Micro800 Motion Features
Support up to 3 axis
with PTO
Compatible with Kinetix 3/300, and 3rd party drives that support PTO
Exact position registration of PTO axis with Touch Probe
Available on Micro830 and Micro850
Easy to use GUI for
configuring the motion
Create and configure axes in CCW using 5 simple-to-use configuration screens
Use the Axis Monitor to see important information about the status of axes
Dedicated motion
instructions
Easy-to-use motion instructions
Reduce the complexity of motion programming
Copyright © 2014 Rockwell Automation, Inc. All Rights Reserved.PUBLIC
Program Example: Homing
21
Moving part at the right (positive) side of Home switch before homing starts
1. Moving part moves to its left side (in Negative direction);
2. When home switch is detected, the moving part decelerates to stop;
3. Moving part moves back (in Positive direction) in creep velocity to detect home switch on->off edge;
4. Once home switch on->off is detected, record the position as mechanical home position, and decelerate
to stop;
5. Move to the configured home position (the mechanical home position recorded during moving back
sequence, plus the home offset configured in Axis configuration in CCW GUI).
Axis homingAxis Homed
Copyright © 2014 Rockwell Automation, Inc. All Rights Reserved.PUBLIC
Wide Variety Of Motion Applications
22
Packaging
VFFS (Vertical Form Fill and Seal)
Case Erector
Stretch wrapping
Material Handling
Conveyors
Sorters
Pick and Place
Cutting
Energy
Solar PV Two-axis positioning
Solar Thermal single-axis positioning
Copyright © 2014 Rockwell Automation, Inc. All Rights Reserved.PUBLIC 23
Agenda
Hands-on Lab Introduction
Connected Components Accelerator Toolkit (CCAT)
Micro800 PTO Motion
What’s New - Connected Components Workbench Release 7.00
Micro800 Family
Copyright © 2014 Rockwell Automation, Inc. All Rights Reserved.PUBLIC 24
Connected Components Accelerator Toolkit (CCAT) Assists with product selection
Jumpstarts the CAD documentation
Provides sample machine and
application code for logic and HMI
Using this tool results in Significantly reduced development time
Enhanced performanceYour
Machine
Sample Code
PowerFlex®
& Kinetix Drives
Connected Components Accelerator Toolkit (CCAT)
Copyright © 2014 Rockwell Automation, Inc. All Rights Reserved.PUBLIC 25
The CCAT includes automation engineering design tools for the
entire machine control application development.
- Bill of Material
- CAD
- Logic
- HMI
- Quick Start
The CCAT allows Machine Builders to significantly reduce
design time and cost; allowing them to concentrate on the
intellectual property that produces compelling and differentiating
machine features.
Bill of Material Files
Writing Diagrams and Panel Layout Drawings
HMI Screens for status and diagnostics
Quick Start for Base System Setup
Programming for control and configuration
Connected Components Accelerator Toolkit (CCAT)
Copyright © 2014 Rockwell Automation, Inc. All Rights Reserved.PUBLIC 26
Agenda
Hands-on Lab Introduction
Connected Components Accelerator Toolkit (CCAT)
Micro800 PTO Motion
What’s New - Connected Components Workbench Release 7.00
Micro800 Family
Copyright © 2014 Rockwell Automation, Inc. All Rights Reserved.PUBLIC
Hands-on Lab Introduction
27
In this lab, you will program a simple labeling application with Servo and AC motors for
your customer’s machine. The picture above shows the parts you have in the machine
and these parts correspond to what you have in the demo kit: The conveyor belt is
driven by the PowerFlex 4M AC drive and motor, the labeling head is driven by the
Kinetix® 3 Servo drive and motor, and the label sensor is connected from the proximity
sensor at the AC motor to the Micro850 controller input terminal 4.
Copyright © 2014 Rockwell Automation, Inc. All Rights Reserved.PUBLIC
Hands-on Lab Introduction
28
Get a head start!
The starting project you will use consists of two building blocks from the
Connected Components Accelerator Toolkit (CCAT) – ‘PowerFlex 4 Speed
Control’ and ‘Kinetix 3 PTO Motion Control’. This will give you a head start in
your labeling application program development.
In this lab, you will:
Learn how the template in the starting project gives you a head start
Explore the ‘Application Sequences’ in your starting project
Try the different device functions through their HMI face plates
Create your labeling application program using the template
Operate and troubleshoot your labeling machine in Auto mode
Copyright © 2012 Rockwell Automation, Inc. All rights reserved.
www.rockwellautomation.com
Follow ROKAutomation on Facebook & Twitter.Connect with us on LinkedIn.
Rev 5058-CO900C
Advanced PLC Topics For Micro800® Controllers
With Motion Capabilities and CIP Messaging Functionality