8/10/2019 l4tnm Ps.aspx

1/3

L4TNML4TNM--PSPSType N Male Positive Stop for 1/2 in LDF4-50A cable

OBSOLETE This product was discontinued on: September 30, 2010

Replaced By

L4TNM-PSA Type N Male Positive Stop for 1/2 in AL4RPV -50, LDF4 -50A, HL4RPV-50 cable

General SpecificationsInterface N MaleBody Style StraightBrand HELIAX | Positive StopMounting Angle Straight

Electrical SpecificationsConnector Impedance 50 ohmOperating Frequency Band 0 8800 MHzCable Impedance 50 ohm3rd Order IMD, typical -116 dBm @ 910 MHz3rd Order IMD Test Method Two +43 dBm carriers

RF Operating Voltage, maximum (vrms) 707.00 Vdc Test Voltage 2000 VOuter Contact Resistance, maximum 0.30 mOhmInner Contact Resistance, maximum 2.00 mOhmInsulation Resistance, minimum 5000 MOhmAverage Power 0.6 kW @ 900 MHzPeak Power, maximum 10.00 kWInsertion Loss, typical 0.05 dBShielding Effectiveness -130 dB

Product SpecificationsProduct Specifications

2015 CommScope, Inc. All rights reserved. All trademarks identified by2015 CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.or are registered trademarks, respectively, of CommScope.All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013

page 1 of 3page 1 of 3 January 13, 2015 January 13, 2015

8/10/2019 l4tnm Ps.aspx

2/3

8/10/2019 l4tnm Ps.aspx

3/3

Operating Temperature -55 C to +85 C ( -67 F to +185 F)Storage Temperature -55 C to +85 C ( -67 F to +185 F)Immersion Depth 1 mImmersion Test Mating UnmatedImmersion Test Method IEC 60529:2001, IP68Water Jetting Test Mating UnmatedWater Jetting Test Method IEC 60529:2001, IP66Moisture Resistance Test Method MIL -STD -202F, Method 106FMechanical Shock Test Method MIL -STD -202, Method 213, Test Condition IThermal Shock Test Method MIL -STD -202F, Method 107G, Test Condition A -1, Low Temperature -55 CVibration Test Method IEC 60068 -2 -6Corrosion Test Method MIL -STD -1344A, Method 1001.1, Test Condition A

Standard Conditions

Attenuation, Ambient Temperature 20 C | 68 FAverage Power, Ambient Temperature 40 C | 104 F

Return Loss/VSWR Frequency Band VSWR Return Loss (dB)451000 MHz 1.02 39.0010102200 MHz 1.03 37.0022103000 MHz 1.05 33.0030104000 MHz 1.09 27.0040106000 MHz 1.25 19.0060108000 MHz 1.33 17.00

Regulatory Compliance/CertificationsAgency ClassificationRoHS 2011/65/EU Compliant by ExemptionChina RoHS SJ/T 11364 -2006 Above Maximum Concentration Value (MCV)

* FootnotesImmersion Depth Immersion at specified depth for 24 hours

Insertion Loss, typical 0.05vfreq (GHz) (not applicable for elliptical waveguide)

Product SpecificationsProduct SpecificationsL4TNML4TNM--PSPS

2015 CommScope, Inc. All rights reserved. All trademarks identified by2015 CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.or are registered trademarks, respectively, of CommScope.All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013

page 3 of 3page 3 of 3 January 13, 2015 January 13, 2015