laboratory name : central power research institute, … · 2021. 6. 17. · is 13567:2018, iec...
TRANSCRIPT
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 1 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
Permanent Facility
1CHEMICAL- HAZARDOUS& RESTRICTEDCHEMICALS
Paint Lead content in Paint ASTM E 1613-12,ASTM E 1645
2 CHEMICAL- LUBRICANTS Inhibited & Uninhibited Mineral Insulating oil, Turbine oiland Hydraulic Oil Gear Oil Density IS1448(Part 16):2014 ISO
3675:1998 ASTM D 1298:12b
3 CHEMICAL- LUBRICANTS Inhibited & Uninhibited Mineral Insulating oil, Turbine oiland Hydraulic Oil Gear Oil Kinematic viscosity at -30°C ISO 3104
4 CHEMICAL- LUBRICANTS Inhibited & Uninhibited Mineral Insulating oil, Turbine oiland Hydraulic Oil Gear Oil
Kinematic viscosity at 27°C,40°C, 100°C IS 1448 (part-25)
5 CHEMICAL- LUBRICANTS Inhibited & Uninhibited Mineral Insulating oil, Turbine oiland Hydraulic Oil Gear Oil
Kinematic viscosity at 40°C,100°C ASTMD 445
6 CHEMICAL- LUBRICANTS Inhibited & Uninhibited Mineral Insulating oil, Turbine oiland Hydraulic Oil Gear Oil Neutralisation value
IS1448 (Part 2):2007 (RA2018), ISO 6619: 1988, IEC62021-1:2003, ASTM D 664
7 CHEMICAL- LUBRICANTS Inhibited & Uninhibited Mineral Insulating oil, Turbine oiland Hydraulic Oil Gear Oil Oxidation Stability by RPVOT
IS 12958: 1990 (RA2016),ASTM D 2272:14a, ASTM D2112
8 CHEMICAL- LUBRICANTS Inhibited & Uninhibited Mineral Insulating oil, Turbine oil,Hydraulic Oil and Gear Oil Pour Point IS 1448 (Part 10-Sec.2):2013,
ISO 3016:1994, ASTM D97
9 CHEMICAL- LUBRICANTS Inhibited & Uninhibited Mineral Insulating oil, Turbine oil,Hydraulic Oil and Gear Oil Appearance
Cl. 6.6 of IS 335:2018, Cl. 6.6of IEC 60296:2012, ASTM D4176:04
10 CHEMICAL- LUBRICANTS Inhibited and Uninhibited mineral insulating oil 2 Furfural and relatedcompounds
IS:15668:2003, ASTMD5837:2015, IEC 61198
11 CHEMICAL- LUBRICANTS Inhibited and Uninhibited mineral insulating oil Ageing characteristicsResistivity @ 27 & 90 deg.C IS : 12177-1987 Method A: RA
12 CHEMICAL- LUBRICANTS Inhibited and Uninhibited mineral insulating oil Ageing characteristics TotalSludge IS : 12177-1987 Method A: RA
13 CHEMICAL- LUBRICANTS Inhibited and Uninhibited mineral insulating oil Ageing characteristics [email protected] IS : 12177-1987 Method A: RA
14 CHEMICAL- LUBRICANTS Inhibited and Uninhibited mineral insulating oil Ageing characteristics TotalAcidity IS 12177-1987 Method A: RA
15 CHEMICAL- LUBRICANTS Inhibited and Uninhibited mineral insulating oil Carbon Type (PNA) Analysis -CA
IS 13155:1991 (RA2016)IEC60590:1977, ASTMD2140-08
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 2 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
16 CHEMICAL- LUBRICANTS Inhibited and Uninhibited mineral insulating oil Carbon Type (PNA) Analysis -CN
IS 13155:1991 (RA2016)IEC60590:1977, ASTMD2140-08
17 CHEMICAL- LUBRICANTS Inhibited and Uninhibited mineral insulating oil Carbon Type (PNA) Analysis -CP
IS 13155:1991 (RA2016)IEC60590:1977, ASTMD2140-08
18 CHEMICAL- LUBRICANTS Inhibited and Uninhibited mineral insulating oil Corrosive Sulphur DIN 51353:1985 ASTM D 1275:2015 IEC 62535
19 CHEMICAL- LUBRICANTS Inhibited and Uninhibited mineral insulating oil Dissolved Gas Analysis -Acetylene
IS 9434:1992 (RA 2013), IEC60567:2011, IS 10593:2018,IEC 60599
20 CHEMICAL- LUBRICANTS Inhibited and Uninhibited mineral insulating oil Dissolved Gas Analysis -Carbon Dioxide
IS 9434:1992 (RA 2013), IEC60567:2011, IS 10593:2018,IEC 60599
21 CHEMICAL- LUBRICANTS Inhibited and Uninhibited mineral insulating oil Dissolved Gas Analysis -Carbon Monoxide
IS 9434:1992(RA 2013), IEC60567:2011, IS 10593:2018,IEC 60599
22 CHEMICAL- LUBRICANTS Inhibited and Uninhibited mineral insulating oil Dissolved Gas Analysis -Ethane
IS 9434:1992 (RA 2013), IEC60567:2011, IS 10593:2018,IEC 60599
23 CHEMICAL- LUBRICANTS Inhibited and Uninhibited mineral insulating oil Dissolved Gas Analysis -Ethylene
IS 9434:1992(RA 2013), IEC60567:2011, IS 10593:2018,IEC 60599
24 CHEMICAL- LUBRICANTS Inhibited and Uninhibited mineral insulating oil Dissolved Gas Analysis -Methane
IS 9434:1992(RA 2013), IEC60567:2011, IS 10593:2018,IEC 60599
25 CHEMICAL- LUBRICANTS Inhibited and Uninhibited mineral insulating oil Dissolved Gas Analysis -Nitrogen
IS 9434:1992(RA 2013), IEC60567:2011, IS 10593:2018,IEC 60599
26 CHEMICAL- LUBRICANTS Inhibited and Uninhibited mineral insulating oil Dissolved Gas Analysis -Oxygen
IS 9434:1992(RA 2013), IEC60567:2011, IS 10593:2018,IEC 60599
27 CHEMICAL- LUBRICANTS Inhibited and Uninhibited mineral insulating oil Dissolved Gas Analysis -Hydrogen
IS 9434:1992 (RA 2013), IEC60567:2011, IS 10593:2018,IEC 60599
28 CHEMICAL- LUBRICANTS Inhibited and Uninhibited mineral insulating oil Flash Point IS : 1448(Part 21)-12 (RA 2017)ISO :2719-2016 ASTM D 93
29 CHEMICAL- LUBRICANTS Inhibited and Uninhibited mineral insulating oil Gassing Tendency IEC60628:1985 Method A,IS12475(Part1):1988 RA
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 3 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
30 CHEMICAL- LUBRICANTS Inhibited and Uninhibited mineral insulating oil Interfacial Tension IS :6104:1971 (RA 2016) ASTMD 971
31 CHEMICAL- LUBRICANTS Inhibited and Uninhibited mineral insulating oil Oxidation Stability Total AcidityTotal Sludge ASTM D 2440
32 CHEMICAL- LUBRICANTS Inhibited and Uninhibited mineral insulating oil Oxidation Stability Total AcidityTotal Sludge DDF@90 deg. C IS 12422
33 CHEMICAL- LUBRICANTS Inhibited and Uninhibited mineral insulating oil Oxidation Stability Total AcidityTotal Sludge DDF@90 deg. C IS 335
34 CHEMICAL- LUBRICANTS Inhibited and Uninhibited mineral insulating oil Oxidation Stability Total AcidityTotal Sludge [email protected] IEC 61125
35 CHEMICAL- LUBRICANTS Inhibited and Uninhibited mineral insulating oil Oxidation Stability Total AcidityTotal Sludge [email protected] IS 1866:2017/ IEC60422
36 CHEMICAL- LUBRICANTS Inhibited and Uninhibited mineral insulating oil PCA Content IP 346: 1992 RA
37 CHEMICAL- LUBRICANTS Inhibited and Uninhibited mineral insulating oil PCB Content IEC 61619:1997, ASTMD 4059
38 CHEMICAL- LUBRICANTS Inhibited and Uninhibited mineral insulating oil Potentially corrosive sulphur IEC 62535
39 CHEMICAL- LUBRICANTS Inhibited and Uninhibited mineral insulating oil Presence of Oxidation Inhibitor(DBPC only) IS 13631:2017, IEC 60666
40 CHEMICAL- LUBRICANTS Inhibited and Uninhibited mineral insulating oilPresence of Oxidation InhibitorPhenolic Type Oxidationinhibitor
ASTM D 2668-07
41 CHEMICAL- LUBRICANTS Inhibited and Uninhibited mineral insulating oil Sediment & SludgeAnnex C of IS 1866:2017 /IEC60422:2013 Cl. 1.9.1 of IEC61125 :
42 CHEMICAL- LUBRICANTS Inhibited and Uninhibited mineral insulating oil Total Sulphur Content ISO 14596
43 CHEMICAL- LUBRICANTS Inhibited and Uninhibited mineral insulating oil Water Content by KFCoulometric method
IS 13567:2018, IEC60814:1997, ASTM D 6304
44 CHEMICAL- LUBRICANTS Insulating oil and lubricating oil Particle sizing and counting ISO4406, ISO4402, IEC60790:2007, IS 13236
45 CHEMICAL- LUBRICANTS Transformer oil Ageing Characteristics (TotalAcidity) ASTM D 1934-95
46 CHEMICAL- LUBRICANTS Transformer oilAgeing Characteristics(Resistivity @ 27 degree C &Resistivity @90 degree C)
ASTM D 1934-95
47 CHEMICAL- LUBRICANTS Transformer oil Ageing CharacteristicsDDF@900C ASTM D 1934-95
48 CHEMICAL- LUBRICANTS Transformer oil Ageing Characteristics Totalsludge ASTM D 1934-95
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 4 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
49 CHEMICAL- LUBRICANTS Transformer oil DBDS IEC 62697-1
50 CHEMICAL- LUBRICANTS Transformer oil Metal Passivator Additives Annex. B, IEC 60666
51 CHEMICAL- LUBRICANTS Turbine Oil Hydraulic Oil Gear Oil Copper strip corrosion ASTM D 130:18 IS1448(Part15):2004(RA2016) ISO 2160:
52 CHEMICAL- LUBRICANTS Turbine Oil Hydraulic Oil Gear Oil Rust prevention characteristics ASTM D 665
53 CHEMICAL- LUBRICANTS Turbine Oil Hydraulic Oil Gear Oil Rust prevention characteristics IS 1448 (part 96)
54 CHEMICAL- LUBRICANTS Turbine Oil Hydraulic Oil Gear Oil Viscosity Index IS1448 (Part 56):2013 ASTM D2270:10 (2016) ISO 2909
55 CHEMICAL- LUBRICANTS Turbine Oil Hydraulic Oil Gear Oil Demulsibility / EmulsionCharacteristics ASTM D 2711
56 CHEMICAL- LUBRICANTS Turbine Oil Hydraulic Oil Gear Oil Flash and Fire Point IS 1448(Part 69):2013 ISO2592 : 2017 ASTM D 92:
57 CHEMICAL- LUBRICANTS Turbine Oil Hydraulic Oil Gear Oil Foaming Characteristics IS1448(Part 67):1982 (RA2016), ASTM D 892
58 CHEMICAL- LUBRICANTS Turbine Oil Hydraulic Oil Gear Oil Trace Sediment ASTM D 2273:08
59 CHEMICAL- LUBRICANTS Turbine Oil Hydraulic Oil Gear Oil Water Content by KFPotentiometric Method ASTM D 4377:00
60 CHEMICAL- LUBRICANTS Turbine Oil Hydraulic Oil Gear Oil Water Separability IS 1448(Part 91):1979(RA2013), ASTM D 1401
61 CHEMICAL- LUBRICANTS Turbine Oil Hydraulic Oil Gear Oil, Insulating oil Colour ASTM D 1500:12 (2017) ASTMD 156:15 ISO 2049:
62 CHEMICAL- LUBRICANTS Turbine oil & Hydraulic Oil (New Test) Cleanliness by Gravimetricanalysis ASTM D 4898
63 CHEMICAL- LUBRICANTS Turbine oil & Hydraulic oil (New Test) Pentane insoluble ASTM D 893:14
64 CHEMICAL- SOLID FUELS Coal Fixed Carbon by difference ASTM D 7582
65 CHEMICAL- SOLID FUELS Coal Ash Content ASTM D 7582
66 CHEMICAL- SOLID FUELS Coal Ash Content Cl.8.0 of IS1350 Part 1:1984 RA
67 CHEMICAL- SOLID FUELS Coal Carbon ASTM D 5373
68 CHEMICAL- SOLID FUELS Coal Gross Calorific Value ASTM D 5865
69 CHEMICAL- SOLID FUELS Coal Hydrogen ASTM D 5373
70 CHEMICAL- SOLID FUELS Coal Moisture Content ASTM D 7582
71 CHEMICAL- SOLID FUELS Coal Moisture content Cl.6.3.2 and Cl.6.7.1 of IS1350:Part-1:1984 RA
72 CHEMICAL- SOLID FUELS Coal Nitrogen ASTM D 5373
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 5 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
73 CHEMICAL- SOLID FUELS Coal Sulphur ASTM D 4239
74 CHEMICAL- SOLID FUELS Coal Volatile Matter ASTM D 7582
75 ELECTRICAL- CABLES &WIRES
Paper Insulated Lead Sheathed Cables for rated Voltagesup to and including 33 kV Capacitance Measurement IS 692, cl. 24
76 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables For working voltagesfrom 3.3 kV up to and including 33 kV Tan Delta Measurement IS 7098 (part 2) cl. 19.
77 ELECTRICAL- CABLES &WIRES Above 150 kV up to 500 kV Thickness and dimension test IEC 62067 cl. 12
78 ELECTRICAL- CABLES &WIRES
Accessories for Extruded power Cables- for workingvoltages for 1.1kV up to 3.3 kV, from 3.3kV (UE) to up toand including 33 kV(E)
Armour Resistivity test IS 13573 Part 2 & 3
79 ELECTRICAL- CABLES &WIRES
Accessories for Extruded power Cables- for workingvoltages for 1.1kV up to 3.3 kV, from 3.3kV (UE) to up toand including 33 kV(E)
Conductor Resistance test Is 13573, Part 1, 2 & 3
80 ELECTRICAL- CABLES &WIRES
Accessories for Extruded power Cables- for workingvoltages for 1.1kV up to 3.3 kV, from 3.3kV (UE) to up toand including 33 kV(E)
Dielectric Strength test IS 13573, Part 1, 2 & 3
81 ELECTRICAL- CABLES &WIRES
Accessories for Extruded power Cables- for workingvoltages for 1.1kV up to 3.3 kV, from 3.3kV (UE) to up toand including 33 kV(E)
Partial discharge Test IS 13573-part 2
82 ELECTRICAL- CABLES &WIRES
Accessories for Extruded power Cables- for workingvoltages for 1.1kV up to 3.3 kV, from 3.3kV (UE) to up toand including 33 kV(E)
Power frequency withstand test IS 13573, Part 1, 2 & 3
83 ELECTRICAL- CABLES &WIRES
Accessories for Extruded power Cables- for workingvoltages for 1.1kV up to 3.3 kV, from 3.3kV (UE) to up toand including 33 kV(E)
Power frequency withstand test IS 13573, Part 1, 2 & 3
84 ELECTRICAL- CABLES &WIRES
Accessories for Extruded power Cables- for workingvoltages from 3.3kV (UE) to up to and including 33 kV(E) Impulse withstand Test IS 13573 part 2 & 3
85 ELECTRICAL- CABLES &WIRES acidity by measuring pH and Conductivity Halogen Acid Test IEC 60754-2
86 ELECTRICAL- CABLES &WIRES
Aerial Bunched Cables - For working voltages up to andincluding 1100 Volts Ageing in air oven IS 14255 cl.10
87 ELECTRICAL- CABLES &WIRES
Aerial Bunched Cables - For working voltages up to andincluding 1100 Volts Carbon Black content test IS 14255, Cl.10
88 ELECTRICAL- CABLES &WIRES
Aerial Bunched Cables - For working voltages up to andincluding 1100 Volts Drainage test IS 14255, Cl.10
89 ELECTRICAL- CABLES &WIRES
Aerial Bunched Cables - For working voltages up to andincluding 1100 Volts Dripping Test IS 14255, Cl.10
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 6 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
90 ELECTRICAL- CABLES &WIRES
Aerial Bunched Cables - For working voltages up to andincluding 1100 Volts
Flame Retardant test(Flammability test) IS 14255 cl.10, Amd. 1:2005
91 ELECTRICAL- CABLES &WIRES
Aerial Bunched Cables - For working voltages up to andincluding 1100 Volts Heat Shock test IS 14255, Cl.10
92 ELECTRICAL- CABLES &WIRES
Aerial Bunched Cables - For working voltages up to andincluding 1100 Volts Hot Deformation Test IS 14255, Cl.10
93 ELECTRICAL- CABLES &WIRES
Aerial Bunched Cables - For working voltages up to andincluding 1100 Volts Hot Set Test IS 14255, Cl.10
94 ELECTRICAL- CABLES &WIRES
Aerial Bunched Cables - For working voltages up to andincluding 1100 Volts Loss of mass test IS 14255, Cl.10
95 ELECTRICAL- CABLES &WIRES
Aerial Bunched Cables - For working voltages up to andincluding 1100 Volts
Mechanical test Tensilestrength test IS 14255 cl.10
96 ELECTRICAL- CABLES &WIRES
Aerial Bunched Cables - For working voltages up to andincluding 1100 Volts
Pressure test at HighTemperature IS 14255, Cl.10
97 ELECTRICAL- CABLES &WIRES
Aerial Bunched Cables - For working voltages up to andincluding 1100 Volts Shrinkage test IS 14255, Cl.10
98 ELECTRICAL- CABLES &WIRES
Aerial Bunched Cables - For working voltages up to andincluding 1100 Volts Test for Resistance to cracking IS 14255, Cl.10
99 ELECTRICAL- CABLES &WIRES
Aerial Bunched Cables – For working voltages up to andincluding 1100 Volts Annealing test IS 14255, Cl.10
100 ELECTRICAL- CABLES &WIRES
Aerial Bunched Cables – For working voltages up to andincluding 1100 Volts Breaking Strength test IS 14255, Cl.10
101 ELECTRICAL- CABLES &WIRES
Aerial Bunched Cables – for working voltages up to andincluding 1100 Volts Conductor Resistance test IS 14255, cl. 10:
102 ELECTRICAL- CABLES &WIRES
Aerial Bunched Cables – For working voltages up to andincluding 1100 Volts Dielectric test IS 14255, Cl.10
103 ELECTRICAL- CABLES &WIRES
Aerial Bunched Cables – For working voltages up to andincluding 1100 Volts Dielectric test IS 14255, Cl.10
104 ELECTRICAL- CABLES &WIRES
Aerial Bunched Cables – For working voltages up to andincluding 1100 Volts Elongation at break IS 14255 cl.10:
105 ELECTRICAL- CABLES &WIRES
Aerial Bunched Cables – for working voltages up to andincluding 1100 Volts Insulation Resistance test IS 14255 cl. 10:
106 ELECTRICAL- CABLES &WIRES
Aerial Bunched Cables – For working voltages up to andincluding 1100 Volts IR Constant test IS 14255, Cl.10
107 ELECTRICAL- CABLES &WIRES
Aerial Bunched Cables – For working voltages up to andincluding 1100 Volts Power frequency withstand test IS 14255 cl.10, Am1:2005
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 7 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
108 ELECTRICAL- CABLES &WIRES
Aerial Bunched Cables – For working voltages up to andincluding 1100 Volts Power frequency withstand test IS 14255, cl.10:
109 ELECTRICAL- CABLES &WIRES
Aerial Bunched Cables – For working voltages up to andincluding 1100 Volts Tear Strength test IS 14255, Cl.10
110 ELECTRICAL- CABLES &WIRES
Aerial Bunched Cables – For working voltages up to andincluding 1100 Volts Volume Resistivity test IS 14255, Cl.10
111 ELECTRICAL- CABLES &WIRES
Aerial Bunched Cables – For working voltages up to andincluding 1100V Thickness and dimension test IS 14255, cl.10
112 ELECTRICAL- CABLES &WIRES
Armoured cables with thermoseting insulation for ratdvoltages from 3.8/6.6 kV to 19/33 kV having low emissionof smoke and corrosive gases
Halogen acid test BS 7835 cl.16:
113 ELECTRICAL- CABLES &WIRES
Armoured cables with thermoseting insulation for ratdvoltages from 3.8/6.6 kV to 19/33 kV having low emissionof smoke and corrosive gases
Smoke density test BS 7835 (cl. 16)
114 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV having low emissionof smoke and corrosive gases
Annealing test BS 7835, cl.16
115 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV having low emissionof smoke and corrosive gases
Armour Resistivity test BS 7835 (cl. 16)
116 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV having low emissionof smoke and corrosive gases
Breaking Strength test BS 7835, cl.16
117 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV having low emissionof smoke and corrosive gases
Capacitance Measurement BS-7835-(Cl.16)
118 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV having low emissionof smoke and corrosive gases
Circuit Integrity Test (FireAlone test) BS 7835, cl.16
119 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV having low emissionof smoke and corrosive gases
Conductor Resistance test BS 7835 (cl. 16)
120 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV having low emissionof smoke and corrosive gases
Elongation at break BS 7835 (cl. 16)
121 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV having low emissionof smoke and corrosive gases
Flame Retadancy test(Sweedish Chimney test) BS 7835, cl.16
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 8 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
122 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV having low emissionof smoke and corrosive gases
Flame Retardancy test onBunched cables BS 7835, cl.16
123 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV having low emissionof smoke and corrosive gases
Flame Retardant test(Flammability test) BS 7835 (cl. 16)
124 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV having low emissionof smoke and corrosive gases
Mechanical Test Tensilestrength test BS 7835 (cl. 16)
125 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV having low emissionof smoke and corrosive gases
Partial discharge Test BS 7835 (cl. 16)
126 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV having low emissionof smoke and corrosive gases
Tan delta at ambient andelevated temperature BS-7835-(Cl.16)
127 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV having low emissionof smoke and corrosive gases
Tear Resistance test BS 7835, cl.16
128 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV having low emissionof smoke and corrosive gases
Thermal Stability Test for PVCmaterial BS 7835 (cl. 16)
129 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV having low emissionof smoke and corrosive gases
Thickness and dimension test BS 7835 cl.16
130 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Ageing in Air oven BS 6622, Cl.15
131 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Annealing test BS 6622, Cl.15
132 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Bending Test BS 6622, Cl.15
133 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Breaking Strength test BS 6622, Cl.15
134 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Capacitance Measurement BS 6622 cl. 15
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 9 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
135 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Capacitance Measurement BS 6622, cl. 15
136 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Carbon Black Content test BS 6622, Cl.15
137 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Cold Bend test BS 6622, Cl.15
138 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Cold Elongation test BS 6622, Cl.15
139 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Conditioning Test BS 6622, Cl.15
140 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Conductor Resistance test BS 6622, Cl.17
141 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Dielectric Strength test BS 6622, Cl.15
142 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Dimension of Armour Material BS 6622 cl.15
143 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Electrical Heat Cycle test BS 6622, Cl.15
144 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Elongation at break BS 6622, Cl.15
145 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Flame Retardance test(Flammability test) BS 6622, Cl.15
146 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Galvanising test (Uniformity ofZinc coating & Mass of Zinccoating)
BS 6622, Cl.15
147 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Heat Shock test BS 6622, Cl.15
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 10 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
148 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Hot Deformation test BS 6622, Cl.15
149 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Hot Set test BS 6622, Cl.15
150 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Impulse withstand Test BS 6622, cl.15
151 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Insulation Resistance test BS 6622, Cl.15
152 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
IR Constant test BS 6622, Cl.15
153 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Load Cycle test BS 6622, Cl.15
154 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Loss of mass test BS 6622, Cl.15
155 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Mechanical test Cold Impacttest BS 6622, Cl.15
156 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Mechanical test Tensilestrength test BS 6622, Cl.15
157 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Partial discharge Test BS 6622 cl. 15
158 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Power frequency withstand test BS 6622, Cl.15
159 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Power Frequency WithstandTest/ Dielectric strength BS 6622 cl. 15
160 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Pressure test at hightemperature BS 6622, Cl.15
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 11 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
161 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Resistivity of Armour test BS 6622, Cl.15
162 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Shrinkage test BS 6622, Cl.15
163 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Tan Delta Measurement BS 6622, cl. 15
164 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Tan Delta Measurement atambient &elevatedtemperature
BS 6622-(Cl.15)
165 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Tear Resistance test BS 6622, Cl.15
166 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
test for Resistance to cracking BS 6622, Cl.15
167 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Thermal Stability Test for PVCmaterial BS 6622, Cl.15
168 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Thickness and dimension test BS 6622 cl. 15
169 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Torsion test BS 6622, Cl.15
170 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Volume Resistivity test BS 6622, Cl.15
171 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Water Absorption (Gravimetric) BS 6622, Cl.15
172 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Water Penetration test BS 6622, Cl.15
173 ELECTRICAL- CABLES &WIRES
Armoured cables with thermosetting Insulation for ratedvoltages from 3.8/6.6 kV to 19/33 kV-Requirements andTest Methods
Winding test BS 6622, Cl.15
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 12 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
174 ELECTRICAL- CABLES &WIRES Bushing for ac voltages above 1000V Partial discharge Test IS 2099, Cl.1.14, Amd 1 & Amd
2
175 ELECTRICAL- CABLES &WIRES Bushings for ac voltages above 1000 Volts Dielectric Strength Test IS 2099, Am1, Am2
176 ELECTRICAL- CABLES &WIRES Bushings for ac voltages above 1000 Volts Dielectric Strength test IS 2099, Am1, Am2
177 ELECTRICAL- CABLES &WIRES Bushings for ac voltages above 1000 Volts Power frequency withstand test IS 2099, Am1, Am2
178 ELECTRICAL- CABLES &WIRES Bushings for ac voltages above 1000 Volts Power frequency withstand test IS 2099, Amd 1, Amd 2
179 ELECTRICAL- CABLES &WIRES Cable accessories & Joints Short Time current Test
IS 13573 part 1/2/3:2011/2011/2011 (Reaffirmed2016/2016/2016) IEC 60502-1-2009,IEC 60502-2-
180 ELECTRICAL- CABLES &WIRES Cable accessories & Joints Short Time current Test
IS 13573 part 1/2/3:2011/2011/2011 (Reaffirmed2016/2016/2016) IEC 60502-1-2009,IEC 60502-2-
181 ELECTRICAL- CABLES &WIRES Cable cleats
Resistant to Electromechanicalforces-Short Time withstandcurrent test
IEC 61914
182 ELECTRICAL- CABLES &WIRES Cable cleats Short time current test IEC 61914
183 ELECTRICAL- CABLES &WIRES
Cable Joints for use with laminated cable rated 2.5 kV -500kV Load Cycle test IEEE Std 404, Cl.7
184 ELECTRICAL- CABLES &WIRES
Cable Joints for use with laminated cable rated 2.5 kV -500kV Load Cycle test IEEE Std-404, Cl.7
185 ELECTRICAL- CABLES &WIRES
Cable Joints for use with laminated cable rated 2.5 kV -500kV Dielectric Strength test IEEE Std. 404, Cl.7
186 ELECTRICAL- CABLES &WIRES
Cable Joints for use with laminated cable rated 2.5 kV -500kV Dielectric Strength Test IEEE Std. 404, Cl.7
187 ELECTRICAL- CABLES &WIRES
Cable Joints for use with laminated cable rated 2.5 kV -500kV Electrical Heat cycle test IEEE Std-404, cl.7:
188 ELECTRICAL- CABLES &WIRES
Cable Joints for use with laminated cable rated 2.5 kV -500kV Electrical Heat cycle test IEEE Std-404, cl.7:
189 ELECTRICAL- CABLES &WIRES
Cable Joints for use with laminated cable rated 2.5 kV -500kV Impulse withstand test IEEE Std 404, Cl.7:
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 13 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
190 ELECTRICAL- CABLES &WIRES
Cable Joints for use with laminated cable rated 2.5 kV -500kV Partial discharge Test IEEE Std-404 (cl.7)
191 ELECTRICAL- CABLES &WIRES
Cable Joints for use with laminated cable rated 2.5 kV -500kV Power frequency withstand test IEEE Std 404, Cl.7:
192 ELECTRICAL- CABLES &WIRES
Cable Joints for use with laminated cable rated 2.5 kV -500kV Power frequency withstand test IEEE Std. 404, Cl.7:
193 ELECTRICAL- CABLES &WIRES Common test method for Tests at low temperature Cold bend test IEC 60811-504:
194 ELECTRICAL- CABLES &WIRES
Common test methods for insulating and sheathingmaterial of electric cables Carbon Black content test IS 10810 pt. 32, 1984, IEC
60811-605
195 ELECTRICAL- CABLES &WIRES
Common test methods for insulating and sheathingmaterial of electric cables Hot set test IS 10810 pt. 30, 1984, IEC
60811-507
196 ELECTRICAL- CABLES &WIRES
Common test methods for insulating and sheathingmaterial of electric cables Mineral oil immersion test IS 10810 pt. 31 1984, IEC
60811-404
197 ELECTRICAL- CABLES &WIRES
Common Test methods for insulating and sheathingmaterials of electric Cables
Mechanical test Tensilestrength test IEC 60811 - 501:
198 ELECTRICAL- CABLES &WIRES
Common Test methods for insulating and sheathingmaterials of electric Cables Tear Resistance test IEC 60811-501
199 ELECTRICAL- CABLES &WIRES
Common test methods for insulating and sheathingmaterials of electric cables
Thermal Stability Test for PVCmaterial IEC 60811-405
200 ELECTRICAL- CABLES &WIRES Common Test methods for Test at low temperature Cold Elongation test IEC 60811-505
201 ELECTRICAL- CABLES &WIRES Common Test methods for test at low temperature Mechanical test Cold Impact
test IEC 60811-506:
202 ELECTRICAL- CABLES &WIRES
Common Test methods insulating and sheathing materialsof electric Cables Water Absorption (Electrical) IEC 60811-402
203 ELECTRICAL- CABLES &WIRES
Common Test methods insulating and sheathing materialsof electric Cables
Water Absorption Test(Gravimetric) IEC 60811-402
204 ELECTRICAL- CABLES &WIRES Compression & mechanical connector for power cables Short time current test IEC 61238-1:2018 IEC
62271-103
205 ELECTRICAL- CABLES &WIRES Conductors for insulated cables & Flexible cords Conductor Resistance test BS EN 60228-2005,IEC 60228:
2
206 ELECTRICAL- CABLES &WIRES Conductors for insulated cables & Flexible cords Conductor resistance test IS 8130:
207 ELECTRICAL- CABLES &WIRES Conductors for insulated cables & Flexible cords Resistivity of Armour BSEN 60228-2005, IEC 60228
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 14 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
208 ELECTRICAL- CABLES &WIRES
Covered conductors for overhead lies of rated voltagesabove 1 KV ac and not exceeding 36 kV ac Ageing in air oven EN 50397-1:
209 ELECTRICAL- CABLES &WIRES
Covered conductors for overhead lies of rated voltagesabove 1 KV ac and not exceeding 36 kV ac
Breaking Strength test(Elongation at break test) EN 50397-1: 2006
210 ELECTRICAL- CABLES &WIRES
Covered conductors for overhead lies of rated voltagesabove 1 KV ac and not exceeding 36 kV ac Carbon Black content test EN 50397-1, Table 2
211 ELECTRICAL- CABLES &WIRES
Covered conductors for overhead lies of rated voltagesabove 1 KV ac and not exceeding 36 kV ac Conductor Resistance test EN 50397-1
212 ELECTRICAL- CABLES &WIRES
Covered conductors for overhead lies of rated voltagesabove 1 KV ac and not exceeding 36 kV ac Dielectric test EN 50397-1, Table 2
213 ELECTRICAL- CABLES &WIRES
Covered conductors for overhead lies of rated voltagesabove 1 KV ac and not exceeding 36 kV ac Dielectric test EN 50397-1, Table 2
214 ELECTRICAL- CABLES &WIRES
Covered conductors for overhead lies of rated voltagesabove 1 KV ac and not exceeding 36 kV ac Electrical Heat cycle test EN 50397-1
215 ELECTRICAL- CABLES &WIRES
Covered conductors for overhead lies of rated voltagesabove 1 KV ac and not exceeding 36 kV ac Heat Shock test EN 50397-1, Table 2
216 ELECTRICAL- CABLES &WIRES
Covered conductors for overhead lies of rated voltagesabove 1 KV ac and not exceeding 36 kV ac Hot Deformation test EN 50397-1, Table 2
217 ELECTRICAL- CABLES &WIRES
Covered conductors for overhead lies of rated voltagesabove 1 KV ac and not exceeding 36 kV ac Hot Set Test EN 50397-1, Table 2
218 ELECTRICAL- CABLES &WIRES
Covered conductors for overhead lies of rated voltagesabove 1 KV ac and not exceeding 36 kV ac
Mechanical test Tensilestrength test EN 50397-1
219 ELECTRICAL- CABLES &WIRES
Covered conductors for overhead lies of rated voltagesabove 1 KV ac and not exceeding 36 kV ac Power frequency withstand test EN 50397-1
220 ELECTRICAL- CABLES &WIRES
Covered conductors for overhead lies of rated voltagesabove 1 KV ac and not exceeding 36 kV ac Power frequency withstand test EN 50397-1
221 ELECTRICAL- CABLES &WIRES
Covered conductors for overhead lies of rated voltagesabove 1 KV ac and not exceeding 36 kV ac Shrinkage test EN 50397-1, Table 2
222 ELECTRICAL- CABLES &WIRES
Covered conductors for overhead lies of rated voltagesabove 1 KV ac and not exceeding 36 kV ac Water penetration test EN 50397-1, Table 2
223 ELECTRICAL- CABLES &WIRES
Density of smoke from the burning or decomposition ofplastics Smoke Density Test ASTM D 2843
224 ELECTRICAL- CABLES &WIRES
Determination of of the products of combustion from smallspcimens of materials Toxicity Index - Carbon Dioxide NCD 1409 NES 713
225 ELECTRICAL- CABLES &WIRES
Determination of of the products of combustion from smallspcimens of materials
Toxicity Index - HydrogenSulphide NCD 1409 NES 713
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 15 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
226 ELECTRICAL- CABLES &WIRES
Determination of of the products of combustion from smallspcimens of materials
Toxicity Index-CarbonMonoxide NCD 1409 NES 713
227 ELECTRICAL- CABLES &WIRES
Determination of f the products of combustion from smallspcimens of materials Toxicity Index - Ammonia NCD 1409 NES 713
228 ELECTRICAL- CABLES &WIRES Determination of flammability by Oxygen Index Oxygen Index Test IS 13501
229 ELECTRICAL- CABLES &WIRES
Determination of of the products of combustion from smallspcimens of materials Toxicity Index - Acrylonitrile NCD 1409 NES 713
230 ELECTRICAL- CABLES &WIRES
Determination of of the products of combustion from smallspcimens of materials Toxicity Index - Formaldehyde NCD 1409 NES 713
231 ELECTRICAL- CABLES &WIRES
Determination of of the products of combustion from smallspcimens of materials
Toxicity Index - HydrogenChloride NCD 1409 NES 713
232 ELECTRICAL- CABLES &WIRES
Determination of of the products of combustion from smallspcimens of materials
Toxicity Index - SulphurDioxide NCD 1409 NES 713
233 ELECTRICAL- CABLES &WIRES
Determination of Toxicity Index of the products ofcombustion from small spceimens of materials Toxicity Index - Phosgene NCD 1409, NES 713
234 ELECTRICAL- CABLES &WIRES
Determination of Toxicity Index of the products ofcombustion from small spcimens of materials
Toxicity Index - HydrogenCyanide NCD 1409 NES 713
235 ELECTRICAL- CABLES &WIRES
Determination of Toxicity Index of the products ofcombustion from small spcimens of materials Toxicity Index - Nitrous Fumes NCD 1409 NES 713
236 ELECTRICAL- CABLES &WIRES
Determination of Toxicity Index of the products ofcombustion from small spcimens of materials Toxicity Index - Phenol NCD 1409 NES 713
237 ELECTRICAL- CABLES &WIRES
Determination of Toxicity Index of the products ofcombustion from small spcimens of materials
Toxicity Index Test-HydrogenFluoride NCD 1409 NES 713
238 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages from 3.3kV up to and including 11 kV
Flame Retardancy test(Flammability test) IS 9968, Part-2, Cl.18
239 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages from 3.3kV up to and including 33 kV Ageing in air oven IS 9968, Part-2, Cl.18
240 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages from 3.3kV up to and including 33 kV Capacitance Measurement IS 9968 Pt. 2, cl. 18
241 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages from 3.3kV up to and including 33 kV Carbon Black Content test IS 9968, Part-2, Cl.18
242 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages from 3.3kV up to and including 33 kV
Conductor Resistance Test/Armour resistivity Test IS 9968 part 2, cl. 22
243 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages from 3.3kV up to and including 33 kV Dielectric Strength test IS 9968, Part-2, Cl.2
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 16 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
244 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages from 3.3kV up to and including 33 kV Dielectric Strength test IS 9968, Part-2, Cl.21
245 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages from 3.3kV up to and including 33 kV Dimension of Armour Material IS 9968 pt 2
246 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages from 3.3kV up to and including 33 kV Electrical Heat cycle test IS 9968, Part-2, Cl.18
247 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages from 3.3kV up to and including 33 kV Galvanising test IS 9968, Part-2, Cl.18
248 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages from 3.3kV up to and including 33 kV Hot Set test IS 9968, Part-2, Cl.18
249 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages from 3.3kV up to and including 33 kV Insulation Resistance test IS 9968, Part-2, Cl.18
250 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages from 3.3kV up to and including 33 kV IR Constant test IS 9968, Part-2, Cl.18
251 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages from 3.3kV up to and including 33 kV Load Cycle test IS 9968 Part-2, Cl.8
252 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages from 3.3kV up to and including 33 kV Mineral Oil Immersion test IS 9968, part-2, Cl.18
253 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages from 3.3kV up to and including 33 kV Partial discharge Test IS 9968 (part 2)
254 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages from 3.3kV up to and including 33 kV
Power Frequency withstandtest IS 9968, Part-2, Cl.18
255 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages from 3.3kV up to and including 33 kV
Power Frequency withstandtest IS 9968, Part-2, Cl.18
256 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages from 3.3kV up to and including 33 kV
Pressure test at hightemperature IS 9968, Part-2, Cl.18
257 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages from 3.3kV up to and including 33 kV
Tan Delta Measurement atambient &elevatedtemperature
IS 9968 part2, cl.18
258 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages from 3.3kV up to and including 33 kV Test for Resistance to cracking IS 9968, Part-2, Cl.18
259 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages from 3.3kV up to and including 33 kV Thickness and dimension test IS 9968 pt. 2 cl.18
260 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages from 3.3kV up to and including 33 kV
Uniformity of Zinc Coating(Mass of Zinc Coating) IS 9968, Part-2, Cl.18
261 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages from 3.3kV up to and including 33 kV Volume Resistivity test IS 9968, Part-2, Cl.18
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 17 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
262 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages from 3.3kV up to and including 33 kV
Water Absorption Test(Electrical) IS 9968 pt. 2, cl. 21
263 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages up to andincluding 1100 V Ageing in Air Bomb IS 9968, Part-1, Am1, Am2
264 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages up to andincluding 1100 V Ageing in Air oven IS 9968, Part-1, Cl.21
265 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages up to andincluding 1100 V Armour Resistivity test IS 9968, Part-1, Cl.21
266 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages up to andincluding 1100 V Capacitance Measurement IS 9968 Pt. 1-Amd I Amd
2,Cl.21)
267 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages up to andincluding 1100 V Conductor Resistance test IS 9968, Part-1, Cl.21
268 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages up to andincluding 1100 V Hot Set test IS 9968, Part-1, Amd 1, Amd 2
269 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages up to andincluding 1100 V Insulation resistance test IS 9968, Part-1, Cl.21
270 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages up to andincluding 1100 V Mineral Oil Immersion test IS 9968, Part-1, Amd 1, Amd 2
271 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages up to andincluding 1100 V Shrinkage test IS 9968, Part-1, Amd 1, Amd 2
272 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages up to andincluding 1100 V
Tan delta at ambient andelevated temperature
IS 9968 Pt. 1, Amd I, Amd 2,Cl.21)
273 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages Up to andincluding 1100 Volts Bending test IS 9968 pt.2 cl.18
274 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages Up to andincluding 1100 Volts Dielectric strength test IS 9968 pt 1 , Cl.21
275 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages Up to andincluding 1100 Volts Dielectric strength test IS 9968 pt 1, Cl.21
276 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages Up to andincluding 1100 Volts Dimension of Armour Material IS 9968 pt 1
277 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages Up to andincluding 1100 Volts
Galvanising test (Uniformity ofZinc coating & Mass of Zinccoating)
IS 9986 pt 1, cl. 21
278 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages Up to andincluding 1100 Volts IR Constant test IS 9968 pt 1, Cl.21
279 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages up to andincluding 1100 Volts Power frequency withstand test IS 9968, Part-1, Cl.21
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 18 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
280 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages up to andincluding 1100 Volts Power frequency withstand test IS 9968, Part-1, Cl.21
281 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages Up to andincluding 1100 Volts Thickness and dimension test IS 9968 pt 1cl.21
282 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages Up to andincluding 1100 Volts Torsion test IS 9968 pt 1, Cl.21
283 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages Up to andincluding 1100 Volts Torsion test IS 9968 pt.2 cl.18
284 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages Up to andincluding 1100 Volts Volume Resistivity test IS 9968 pt 1, Cl.21
285 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages Up to andincluding 1100 Volts
Water Absorption Test(Electrical) IS 9968 pt 2, cl.21
286 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages Up to andincluding 1100 Volts
Water immersion (Absence ofFault in the insulation) IS 9968, Part-1, Cl.21
287 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages Up to andincluding 1100 Volts
Water Immersion test (Absenceof faults in the insulation) IS 9968, Part-1, Cl.21
288 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages Up to andincluding 1100 Volts Winding test IS 9968 pt 1, Cl.21
289 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages Up to andincluding 1100 Volts Winding test IS 9968 pt.2 cl.18
290 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages Up to andincluding 1100 Volts Wrapping test IS 9968, Part-1, Cl.18
291 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Cables for working voltages up to andincluding 1100 Volts Wrapping test IS 9968, Part-1, Cl.21
292 ELECTRICAL- CABLES &WIRES Elastomer Insulated Flexible Cables for use in Mines Thickness and dimension test IS 14494 cl.25
293 ELECTRICAL- CABLES &WIRES Elastomer Insulated Flexible Cables for use in Mines Ageing in Air Bomb IS 14494, cl.25
294 ELECTRICAL- CABLES &WIRES Elastomer Insulated Flexible Cables for use in Mines Ageing in air oven IS 14494, cl.25
295 ELECTRICAL- CABLES &WIRES Elastomer Insulated Flexible Cables for use in Mines Armour Resistivity test IS 14494, cl.25
296 ELECTRICAL- CABLES &WIRES Elastomer Insulated Flexible Cables for use in Mines Bending test IS 14494, cl.25
297 ELECTRICAL- CABLES &WIRES Elastomer Insulated Flexible Cables for use in Mines Capacitance Measurement IS 14494, cl. 25
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 19 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
298 ELECTRICAL- CABLES &WIRES Elastomer Insulated Flexible Cables for use in Mines Carbon Black content test IS 14494, cl.25
299 ELECTRICAL- CABLES &WIRES Elastomer Insulated Flexible Cables for use in Mines Conductor Resistance test IS 14494, cl.25
300 ELECTRICAL- CABLES &WIRES Elastomer Insulated Flexible Cables for use in Mines Dielectric Strength test IS 14494, cl.25
301 ELECTRICAL- CABLES &WIRES Elastomer Insulated Flexible Cables for use in Mines Dielectric Strength test IS 14494, cl.25
302 ELECTRICAL- CABLES &WIRES Elastomer Insulated Flexible Cables for use in Mines Dimension of Armour Material IS 14494 cl. 25
303 ELECTRICAL- CABLES &WIRES Elastomer Insulated Flexible Cables for use in Mines Electrical Heating Cycle test IS 14494, cl.25
304 ELECTRICAL- CABLES &WIRES Elastomer Insulated Flexible Cables for use in Mines Flame Retardancy test
(Sweedish Chimney test) IS 14494, cl.25
305 ELECTRICAL- CABLES &WIRES Elastomer Insulated Flexible Cables for use in Mines Flame Retardant test
(Flammability test) IS 14494, cl.25
306 ELECTRICAL- CABLES &WIRES Elastomer Insulated Flexible Cables for use in Mines
Galvanising test (Uniformity ofZinc coating & Mass of Zinccoating)
IS 14494 cl.25
307 ELECTRICAL- CABLES &WIRES Elastomer Insulated Flexible Cables for use in Mines Heat Shock test IS 14494, cl.25
308 ELECTRICAL- CABLES &WIRES Elastomer Insulated Flexible Cables for use in Mines Hot Deformation test IS 14494, cl.25
309 ELECTRICAL- CABLES &WIRES Elastomer Insulated Flexible Cables for use in Mines Hot Set test IS 14494, cl.25
310 ELECTRICAL- CABLES &WIRES Elastomer Insulated Flexible Cables for use in Mines Insulation Resistance test IS 14494, cl.25
311 ELECTRICAL- CABLES &WIRES Elastomer Insulated Flexible Cables for use in Mines Loss of mass test IS 14494, cl.25
312 ELECTRICAL- CABLES &WIRES Elastomer Insulated Flexible Cables for use in Mines Mineral Oil Immersion test IS 14494, cl.25
313 ELECTRICAL- CABLES &WIRES Elastomer Insulated Flexible Cables for use in Mines Partial discharge Test IS 14494, cl. 25
314 ELECTRICAL- CABLES &WIRES Elastomer Insulated Flexible Cables for use in Mines Power frequency withstand test IS 14494, cl.25
315 ELECTRICAL- CABLES &WIRES Elastomer Insulated Flexible Cables for use in Mines Power frequency withstand test IS 14494, cl.25
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 20 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
316 ELECTRICAL- CABLES &WIRES Elastomer Insulated Flexible Cables for use in Mines Pressure test at high
temperature IS 14494, cl.25
317 ELECTRICAL- CABLES &WIRES Elastomer Insulated Flexible Cables for use in Mines Resistivity of Armour test IS 14494, cl.25
318 ELECTRICAL- CABLES &WIRES Elastomer Insulated Flexible Cables for use in Mines Shrinkage test IS 14494, cl.25
319 ELECTRICAL- CABLES &WIRES Elastomer Insulated Flexible Cables for use in Mines
Tan Delta Measurement atambient & elevatedtemperature
IS 14494, cl. 25
320 ELECTRICAL- CABLES &WIRES Elastomer Insulated Flexible Cables for use in Mines Test for Resistance to cracking IS 14494, cl.25
321 ELECTRICAL- CABLES &WIRES Elastomer Insulated Flexible Cables for use in Mines Torsion test IS 14494, cl.25
322 ELECTRICAL- CABLES &WIRES Elastomer Insulated Flexible Cables for use in Mines Volume Resistivity test IS 14494, cl.25
323 ELECTRICAL- CABLES &WIRES Elastomer Insulated Flexible Cables for use in Mines Water Absorption Test
(Electrical) IS 14494, cl.25
324 ELECTRICAL- CABLES &WIRES Elastomer Insulated Flexible Cables for use in Mines Water penetration test IS 14494, cl.25
325 ELECTRICAL- CABLES &WIRES Elastomer Insulated Flexible Cables for use in Mines Winding test IS 14494, cl.25
326 ELECTRICAL- CABLES &WIRES Elastomer Insulated Flexible Cables for use in Mines Wrapping test IS 14494, cl.25
327 ELECTRICAL- CABLES &WIRES
Elastomer insulated Flexible cables for use in minesElastomer Insulated Flexible Cables for working voltagesupto including 1100 Volts
Mechanical test Tensilestrength test IS 14494, cl.25
328 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Flexible Cables for working voltagesfrom 3.3 kV upto including 1100 Volts
Mechanical test TensileStrength test IS 9968, Part-1, Cl.18
329 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Flexible Cables for working voltagesfrom 3.3 kV upto including 1100 Volts
Mechanical test Tensilestrength test IS 9968, Part-2, Cl.18
330 ELECTRICAL- CABLES &WIRES
Elastomer Insulated Flexible Cables for working voltagesfrom 3.3 kVupto including 1100 Volts Tear Resistance test IS 9968, Part-2, Cl.18
331 ELECTRICAL- CABLES &WIRES
Elastomer insulated Flexible cables foruse in minesElastomer Insulated Flexible Cables for working voltagesupto including 1100 Volts
Tear Resistance test IS 14494, cl.25
332 ELECTRICAL- CABLES &WIRES Elastomer Insulation & Sheath of electric Cables Water Absorption Test
(Electrical) IS 6380
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 21 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
333 ELECTRICAL- CABLES &WIRES
Electric Cables Armoured cables with thermosetinginsulation for ratd voltages from 3.8/6.6 kV to 19/33 kVhaving low emission of smoke and corrosive gases
Circuit Integrity (Fire Alonetest) BS 7835 (cl. 16)
334 ELECTRICAL- CABLES &WIRES
Electric Cables Armoured cables with thermosetinginsulation for ratd voltages from 3.8/6.6 kV to 19/33 kVhaving low emission of smoke and corrosive gases
Flame Retardant test(Flammability test) BS 7835 (cl. 16)
335 ELECTRICAL- CABLES &WIRES
Electric Cables – PVC insulated and PVC Sheathed cablesfor voltages up to and including 300/500 V, for electricPower and lighting
Ageing in air bomb BS 6004 cl.8
336 ELECTRICAL- CABLES &WIRES
Electric Cables – PVC insulated and PVC Sheathed cablesfor voltages up to and including 300/500 V, for electricPower and lighting
Armour Resistivity test BS 6004 cl.7
337 ELECTRICAL- CABLES &WIRES
Electric Cables – PVC insulated and PVC Sheathed cablesfor voltages up to and including 300/500 V, for electricPower and lighting
Carbon Black Content test BS 6004 cl.8
338 ELECTRICAL- CABLES &WIRES
Electric Cables – PVC insulated and PVC Sheathed cablesfor voltages up to and including 300/500 V, for electricPower and lighting
Cold Elongation test BS 6004 cl.8
339 ELECTRICAL- CABLES &WIRES
Electric Cables – PVC insulated and PVC Sheathed cablesfor voltages up to and including 300/500 V, for electricPower and lighting
DC withstand Test BS 6004, cl.17
340 ELECTRICAL- CABLES &WIRES
Electric Cables – PVC insulated and PVC Sheathed cablesfor voltages up to and including 300/500 V, for electricPower and lighting
Heat Shock test BS 6004 cl.8
341 ELECTRICAL- CABLES &WIRES
Electric Cables – PVC insulated and PVC Sheathed cablesfor voltages up to and including 300/500 V, for electricPower and lighting
Hot Deformation test BS 6004 cl.8
342 ELECTRICAL- CABLES &WIRES
Electric Cables – PVC insulated and PVC Sheathed cablesfor voltages up to and including 300/500 V, for electricPower and lighting
Hot Set test BS 6004 cl.8
343 ELECTRICAL- CABLES &WIRES
Electric Cables – PVC insulated and PVC Sheathed cablesfor voltages up to and including 300/500 V, for electricPower and lighting
IR Constant test BS 6004 cl.16
344 ELECTRICAL- CABLES &WIRES
Electric Cables – PVC insulated and PVC Sheathed cablesfor voltages up to and including 300/500 V, for electricPower and lighting
Loss of mass test BS 6004 cl.8
345 ELECTRICAL- CABLES &WIRES
Electric Cables – PVC insulated and PVC Sheathed cablesfor voltages up to and including 300/500 V, for electricPower and lighting
Pressure test at hightemperature BS 6004 cl.8
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 22 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
346 ELECTRICAL- CABLES &WIRES
Electric Cables – PVC insulated and PVC Sheathed cablesfor voltages up to and including 300/500 V, for electricPower and lighting
Shrinkage test BS 6004 cl.8
347 ELECTRICAL- CABLES &WIRES
Electric Cables – PVC insulated and PVC Sheathed cablesfor voltages up to and including 300/500 V, for electricPower and lighting
Test for Resistance to cracking BS 6004 cl.8
348 ELECTRICAL- CABLES &WIRES
Electric Cables – PVC insulated and PVC Sheathed cablesfor voltages up to and including 300/500 V, for electricPower and lighting
Thermal Stability Test for PVCmaterial BS 6004 cl.8
349 ELECTRICAL- CABLES &WIRES
Electric Cables – PVC insulated and PVC Sheathed cablesfor voltages up to and including 300/500 V, for electricPower and lighting
Thickness and dimension test BS – 6004 -Cl.No. 7
350 ELECTRICAL- CABLES &WIRES
Electric Cables – PVC insulated and PVC Sheathed cablesfor voltages up to and including 300/500 V, for electricPower and lighting
Volume Resistivity test BS 6004 cl.16
351 ELECTRICAL- CABLES &WIRES
Electric Cables – PVC insulated and PVC Sheathed cablesfor voltages up to and including 300/500 V, for electricPower and lighting
Ageing in air oven BS 6004 cl.8
352 ELECTRICAL- CABLES &WIRES
Electric Cables – PVC insulated and PVC Sheathed cablesfor voltages up to and including 300/500 V, for electricPower and lighting
Annealing test BS 6004 cl.8
353 ELECTRICAL- CABLES &WIRES
Electric Cables – PVC insulated and PVC Sheathed cablesfor voltages up to and including 300/500 V, for electricPower and lighting
Breaking Strength test(Elongation at break) BS 6004 cl.8
354 ELECTRICAL- CABLES &WIRES
Electric Cables – PVC insulated and PVC Sheathed cablesfor voltages up to and including 300/500 V, for electricPower and lighting
Cold Bend test BS 6004 cl.8
355 ELECTRICAL- CABLES &WIRES
Electric Cables – PVC insulated and PVC Sheathed cablesfor voltages up to and including 300/500 V, for electricPower and lighting
Conductor Resistance test BS 6004 cl.8
356 ELECTRICAL- CABLES &WIRES
Electric Cables – PVC insulated and PVC Sheathed cablesfor voltages up to and including 300/500 V, for electricPower and lighting
Dielectric strength test BS 6004 cl.7
357 ELECTRICAL- CABLES &WIRES
Electric Cables – PVC insulated and PVC Sheathed cablesfor voltages up to and including 300/500 V, for electricPower and lighting
Dielectric Strength test BS 6004 cl.7
358 ELECTRICAL- CABLES &WIRES
Electric Cables – PVC insulated and PVC Sheathed cablesfor voltages up to and including 300/500 V, for electricPower and lighting
Flame Retardance test(Flammability test) BS 6004 cl.8
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 23 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
359 ELECTRICAL- CABLES &WIRES
Electric Cables – PVC insulated and PVC Sheathed cablesfor voltages up to and including 300/500 V, for electricPower and lighting
Insulation Resistance test BS 6004 cl.8
360 ELECTRICAL- CABLES &WIRES
Electric Cables – PVC insulated and PVC Sheathed cablesfor voltages up to and including 300/500 V, for electricPower and lighting
Mechanical test Cold Impacttest BS 6004 cl.8
361 ELECTRICAL- CABLES &WIRES
Electric Cables – PVC insulated and PVC Sheathed cablesfor voltages up to and including 300/500 V, for electricPower and lighting
Mechanical test Tensilestrength test BS 6004 cl.8
362 ELECTRICAL- CABLES &WIRES
Electric Cables – PVC insulated and PVC Sheathed cablesfor voltages up to and including 300/500 V, for electricPower and lighting
Power Frequency withstandtest BS 6004 cl.8
363 ELECTRICAL- CABLES &WIRES
Electric Cables – PVC insulated and PVC Sheathed cablesfor voltages up to and including 300/500 V, for electricPower and lighting
Power frequency withstand test BS 6004 cl.8
364 ELECTRICAL- CABLES &WIRES
Electric Cables – PVC insulated and PVC Sheathed cablesfor voltages up to and including 300/500 V, for electricPower and lighting
Tear Resistance test BS 6004 cl.8
365 ELECTRICAL- CABLES &WIRES
Electric Cables – PVC insulated and PVC Sheathed cablesfor voltages up to and including 300/500 V, for electricPower and lighting
Water immersion test (Absenceof faults in the insulation) BS 6004 cl.8
366 ELECTRICAL- CABLES &WIRES
Electric Cables – PVC insulated and PVC Sheathed cablesfor voltages up to and including 300/500 V, for electricPower and lighting
Water Immersion test (Absenceof faults in the insulation) BS 6004 cl.8
367 ELECTRICAL- CABLES &WIRES
Electric cables – Thermosetting insulated a ndthermoplastic sheathed cables for voltages upto andincluding 450/750 V,for electric power and lighting andhaving low emission of smoke and corrosive gases whenaffected by fire
Halogen Acid test BS 7211, Cl.12
368 ELECTRICAL- CABLES &WIRES
Electric cables – Thermosetting insulated and thermoplasticsheathed cables for voltages upto and including 450/750 V,for electric power and lighting and having low emission ofsmoke and corrosive gases when affected by fire
Circuit Integrity test BS 7211, Cl.12
369 ELECTRICAL- CABLES &WIRES
Electric cables – Thermosetting insulated and thermoplasticsheathed cables for voltages upto and including 450/750 V,for electric power and lighting and having low emission ofsmoke and corrosive gases when affected by fire
Flame Retardance test(Flammability test) BS 7211, Cl.12
370 ELECTRICAL- CABLES &WIRES
Electric cables – Thermosetting insulated and thermoplasticsheathed cables for voltages upto and including 450/750V,for electric power and lighting and having low emission ofsmoke and corrosive gases when affected by fire
Smoke Density Test BS 7211 cl.12
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 24 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
371 ELECTRICAL- CABLES &WIRES
Electric cables – Thermosetting insulated and thermoplasticsheathed cables for voltages upto and including 450/750 V,for electric power and lighting and having low emission ofsmoke and corrosive gases when affected by fire
Flame Retardance test onBunch of Cables BS 7211, Cl.12
372 ELECTRICAL- CABLES &WIRES
Electric Cables – Thermosetting insulated, armoured cablesof rated voltages 600/1000 V & 1900/3300 V for fixedinstallation
Insulation Resistance test BS 5467 cl.14
373 ELECTRICAL- CABLES &WIRES
Electric Cables – Thermosetting insulated, armoured cablesof rated voltages 600/1000 V & 1900/3300 V for fixedinstallation
IR Constant test BS 5467 cl.14
374 ELECTRICAL- CABLES &WIRES
Electric Cables – Thermosetting insulated, armoured cablesof rated voltages 600/1000 V & 1900/3300 V for fixedinstallation
Volume Resistivity test BS 5467 cl.14
375 ELECTRICAL- CABLES &WIRES
Electric cables – thermosetting insulated, armoured, fire-resistant cables of rated voltage 600/1000 v, having lowemission of smoke and corrosive gases
Halogen Acid Test BS 7846 cl.14
376 ELECTRICAL- CABLES &WIRES
Electric cables – thermosetting insulated, armoured, fire-resistant cables of rated voltage 600/1000 v, having lowemission of smoke and corrosive gases
Smoke Density Test BS 7846 cl.14
377 ELECTRICAL- CABLES &WIRES
Electric Cables Armoured cables with thermosetinginsulation for rated voltages 600/1000 V and 1900/3300 Vfor fixed installations, having low emission of smoke andcorrosive gases when affected by fire
Dimension of Armour Material BS 6724 cl. 14
378 ELECTRICAL- CABLES &WIRES
Electric Cables Armoured cables with thermosetinginsulation for rated voltages 600/1000 V and 1900/3300 Vfor fixed installations, having low emission of smoke andcorrosive gases when affected by fire
Smoke Density Test BS 6724 cl.14
379 ELECTRICAL- CABLES &WIRES
Electric Cables Armoured cables with thermosetinginsulation for rated voltages 600/1000 V and 1900/3300 Vfor fixed installations, having low emission of smoke andcorrosive gases when affected by fire
Thickness and dimension test BS 6724 cl.14
380 ELECTRICAL- CABLES &WIRES
Electric Cables Armoured cables with thermosetinginsulation for rated voltages 600/1000 V and 1900/3300 Vfor fixed installations, having low emission of smoke andcorrosive gases when affected by fire
Ageing in Air Oven BS 6724, cl. 14
381 ELECTRICAL- CABLES &WIRES
Electric Cables Armoured cables with thermosetinginsulation for rated voltages 600/1000 V and 1900/3300 Vfor fixed installations, having low emission of smoke andcorrosive gases when affected by fire
Annealing test BS 6724, cl. 14
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 25 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
382 ELECTRICAL- CABLES &WIRES
Electric Cables Armoured cables with thermosetinginsulation for rated voltages 600/1000 V and 1900/3300 Vfor fixed installations, having low emission of smoke andcorrosive gases when affected by fire
Bending test BS 6724, cl. 14
383 ELECTRICAL- CABLES &WIRES
Electric Cables Armoured cables with thermosetinginsulation for rated voltages 600/1000 V and 1900/3300 Vfor fixed installations, having low emission of smoke andcorrosive gases when affected by fire
Breaking Strength (Elongationat break) BS 6724, cl. 14
384 ELECTRICAL- CABLES &WIRES
Electric Cables Armoured cables with thermosetinginsulation for rated voltages 600/1000 V and 1900/3300 Vfor fixed installations, having low emission of smoke andcorrosive gases when affected by fire
Carbon Black content test BS 6724, cl. 14
385 ELECTRICAL- CABLES &WIRES
Electric Cables Armoured cables with thermosetinginsulation for rated voltages 600/1000 V and 1900/3300 Vfor fixed installations, having low emission of smoke andcorrosive gases when affected by fire
Circuit Integrity (Fire Alonetest) BS 6724, cl. 14
386 ELECTRICAL- CABLES &WIRES
Electric Cables Armoured cables with thermosetinginsulation for rated voltages 600/1000 V and 1900/3300 Vfor fixed installations, having low emission of smoke andcorrosive gases when affected by fire
Cold Bend test BS 6724, cl. 14
387 ELECTRICAL- CABLES &WIRES
Electric Cables Armoured cables with thermosetinginsulation for rated voltages 600/1000 V and 1900/3300 Vfor fixed installations, having low emission of smoke andcorrosive gases when affected by fire
Cold Elongation test BS 6724, cl. 14
388 ELECTRICAL- CABLES &WIRES
Electric Cables Armoured cables with thermosetinginsulation for rated voltages 600/1000 V and 1900/3300 Vfor fixed installations, having low emission of smoke andcorrosive gases when affected by fire
Fire Retardant test(Flammability Test) BS 6724, cl. 14
389 ELECTRICAL- CABLES &WIRES
Electric Cables Armoured cables with thermosetinginsulation for rated voltages 600/1000 V and 1900/3300 Vfor fixed installations, having low emission of smoke andcorrosive gases when affected by fire
Flame Retardant test onBunched Cables BS 6724, cl. 14
390 ELECTRICAL- CABLES &WIRES
Electric Cables Armoured cables with thermosetinginsulation for rated voltages 600/1000 V and 1900/3300 Vfor fixed installations, having low emission of smoke andcorrosive gases when affected by fire
Heat Shock test BS 6724, cl. 14
391 ELECTRICAL- CABLES &WIRES
Electric Cables Armoured cables with thermosetinginsulation for rated voltages 600/1000 V and 1900/3300 Vfor fixed installations, having low emission of smoke andcorrosive gases when affected by fire
Hot Deformation test BS 6724, cl. 14
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 26 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
392 ELECTRICAL- CABLES &WIRES
Electric Cables Armoured cables with thermosetinginsulation for rated voltages 600/1000 V and 1900/3300 Vfor fixed installations, having low emission of smoke andcorrosive gases when affected by fire
Hot set test BS 6724, cl. 14
393 ELECTRICAL- CABLES &WIRES
Electric Cables Armoured cables with thermosetinginsulation for rated voltages 600/1000 V and 1900/3300 Vfor fixed installations, having low emission of smoke andcorrosive gases when affected by fire
Insulation Resistance test BS 6724, cl. 14
394 ELECTRICAL- CABLES &WIRES
Electric Cables Armoured cables with thermosetinginsulation for rated voltages 600/1000 V and 1900/3300 Vfor fixed installations, having low emission of smoke andcorrosive gases when affected by fire
IR Contant test BS 6724, cl. 14
395 ELECTRICAL- CABLES &WIRES
Electric Cables Armoured cables with thermosetinginsulation for rated voltages 600/1000 V and 1900/3300 Vfor fixed installations, having low emission of smoke andcorrosive gases when affected by fire
Loss of mass test BS 6724, cl. 14
396 ELECTRICAL- CABLES &WIRES
Electric Cables Armoured cables with thermosetinginsulation for rated voltages 600/1000 V and 1900/3300 Vfor fixed installations, having low emission of smoke andcorrosive gases when affected by fire
Mechanical test Cold Impacttest BS 6724, cl. 14
397 ELECTRICAL- CABLES &WIRES
Electric Cables Armoured cables with thermosetinginsulation for rated voltages 600/1000 V and 1900/3300 Vfor fixed installations, having low emission of smoke andcorrosive gases when affected by fire
Mechanical test tensile test BS 6724, cl. 14
398 ELECTRICAL- CABLES &WIRES
Electric Cables Armoured cables with thermosetinginsulation for rated voltages 600/1000 V and 1900/3300 Vfor fixed installations, having low emission of smoke andcorrosive gases when affected by fire
Pressure test at hightemperature BS 6724, cl. 14
399 ELECTRICAL- CABLES &WIRES
Electric Cables Armoured cables with thermosetinginsulation for rated voltages 600/1000 V and 1900/3300 Vfor fixed installations, having low emission of smoke andcorrosive gases when affected by fire
Shrinkage test BS 6724, cl. 14
400 ELECTRICAL- CABLES &WIRES
Electric Cables Armoured cables with thermosetinginsulation for rated voltages 600/1000 V and 1900/3300 Vfor fixed installations, having low emission of smoke andcorrosive gases when affected by fire
Test for resistance to cracking BS 6724, cl. 14
401 ELECTRICAL- CABLES &WIRES
Electric Cables Armoured cables with thermosetinginsulation for rated voltages 600/1000 V and 1900/3300 Vfor fixed installations, having low emission of smoke andcorrosive gases when affected by fire
Volume Resistivity test BS 6724, cl. 14
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 27 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
402 ELECTRICAL- CABLES &WIRES
Electric Cables Armoured cables with thermosetinginsulation for rated voltages 600/1000 V and 1900/3300 Vfor fixed installations, having low emission of smoke andcorrosive gases when affected by fire
Winding test BS 6724, cl. 14
403 ELECTRICAL- CABLES &WIRES
Electric Cables Armoured cables with thermosetinginsulation for rated voltages 600/1000 V and 1900/3300 Vfor fixed installations, having low emission of smoke andcorrosive gases when affected by fire
Wrapping test BS 6724, cl. 14
404 ELECTRICAL- CABLES &WIRES
Electric Cables Armoured cables with thermosetinginsulation for rated voltages from 3.8/6.6 kV to 19/33 kVhaving low emission of smoke and corrosive gases
Flame Retardance test onBunch of cables BS 7835 (cl. 16)
405 ELECTRICAL- CABLES &WIRES
Electric Cables Armoured cables with thermosettinginsulation for rated voltages 600/1000 V and 1900/3300 Vfor fixed installations, having low emission of smoke andcorrosive gases when affected by fire
Galvanising test (Uniformity ofZinc coating & Mass of Zinccoating)
BS 6724 cl.14
406 ELECTRICAL- CABLES &WIRES
Electric Cables Armoured cables with thermosettinginsulation for rated voltages 600/1000 V and 1900/3300 Vfor fixed installations, having low emission of smoke andcorrosive gases when affected by fire
Halogen Acid Test BS 6724 cl.14
407 ELECTRICAL- CABLES &WIRES
Electric cables single core PVC insulated flexible cables ofrated voltage 600/1000 V for switchgear and control gearwiring
Ageing in Air Bomb BS 6231, Cl.11
408 ELECTRICAL- CABLES &WIRES
Electric cables single core PVC insulated flexible cables ofrated voltage 600/1000 V for switchgear and control gearwiring
Ageing in Air Oven BS 6231, Cl.11
409 ELECTRICAL- CABLES &WIRES
Electric cables single core PVC insulated flexible cables ofrated voltage 600/1000 V for switchgear and control gearwiring
Annealing test BS 6231, Cl.11
410 ELECTRICAL- CABLES &WIRES
Electric cables single core PVC insulated flexible cables ofrated voltage 600/1000 V for switchgear and control gearwiring
Breaking Strength test (Elongation at Break) BS 6231, Cl.11
411 ELECTRICAL- CABLES &WIRES
Electric cables single core PVC insulated flexible cables ofrated voltage 600/1000 V for switchgear and control gearwiring
Carbon Black content test BS 6231, Cl.11
412 ELECTRICAL- CABLES &WIRES
Electric cables single core PVC insulated flexible cables ofrated voltage 600/1000 V for switchgear and control gearwiring
Cold Bend test BS 6231, Cl.11
413 ELECTRICAL- CABLES &WIRES
Electric cables single core PVC insulated flexible cables ofrated voltage 600/1000 V for switchgear and control gearwiring
Cold Elongation test BS 6231, Cl.11
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 28 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
414 ELECTRICAL- CABLES &WIRES
Electric cables single core PVC insulated flexible cables ofrated voltage 600/1000 V for switchgear and control gearwiring
Dielectric Strength test BS 6231, Cl.11
415 ELECTRICAL- CABLES &WIRES
Electric cables single core PVC insulated flexible cables ofrated voltage 600/1000 V for switchgear and control gearwiring
Dielectric Strength test BS 6231, Cl.11
416 ELECTRICAL- CABLES &WIRES
Electric cables single core PVC insulated flexible cables ofrated voltage 600/1000 V for switchgear and control gearwiring
Fire Retardant/ FlammabilityTest BS 6231 cl. 11
417 ELECTRICAL- CABLES &WIRES
Electric cables single core PVC insulated flexible cables ofrated voltage 600/1000 V for switchgear and control gearwiring
Heat Shock test BS 6231, Cl.11
418 ELECTRICAL- CABLES &WIRES
Electric cables single core PVC insulated flexible cables ofrated voltage 600/1000 V for switchgear and control gearwiring
Hot Deformation test BS 6231, Cl.11
419 ELECTRICAL- CABLES &WIRES
Electric cables single core PVC insulated flexible cables ofrated voltage 600/1000 V for switchgear and control gearwiring
Loss of mass test BS 6231, Cl.11
420 ELECTRICAL- CABLES &WIRES
Electric cables single core PVC insulated flexible cables ofrated voltage 600/1000 V for switchgear and control gearwiring
Mechanical test Cold Impacttest BS 6231, Cl.11
421 ELECTRICAL- CABLES &WIRES
Electric cables single core PVC insulated flexible cables ofrated voltage 600/1000 V for switchgear and control gearwiring
Mechanical test Tensile test BS 6231, Cl.11
422 ELECTRICAL- CABLES &WIRES
Electric cables single core PVC insulated flexible cables ofrated voltage 600/1000 V for switchgear and control gearwiring
Power frequency test BS 6231, Cl.11
423 ELECTRICAL- CABLES &WIRES
Electric cables single core PVC insulated flexible cables ofrated voltage 600/1000 V for switchgear and control gearwiring
Power Frequency withstandtest BS 6231, Cl.11
424 ELECTRICAL- CABLES &WIRES
Electric cables single core PVC insulated flexible cables ofrated voltage 600/1000 V for switchgear and control gearwiring
Pressure test at hightemperature BS 6231, Cl.11
425 ELECTRICAL- CABLES &WIRES
Electric cables single core PVC insulated flexible cables ofrated voltage 600/1000 V for switchgear and control gearwiring
Shrinkage test BS 6231, Cl.11
426 ELECTRICAL- CABLES &WIRES
Electric cables single core PVC insulated flexible cables ofrated voltage 600/1000 V for switchgear and control gearwiring
Test for resistance to cracking BS 6231, Cl.11
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 29 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
427 ELECTRICAL- CABLES &WIRES
Electric cables single core PVC insulated flexible cables ofrated voltage 600/1000 V for switchgear and control gearwiring
Thermal Stability Test for PVCmaterial BS 6231 cl.11
428 ELECTRICAL- CABLES &WIRES
Electric cables single core PVC insulated flexible cables ofrated voltage 600/1000 V for switchgear and control gearwiring
Water Immersion test (Absenceof faults in the insulation) BS 6231, Cl.11
429 ELECTRICAL- CABLES &WIRES
Electric cables single core PVC insulated flexible cables ofrated voltage 600/1000 V for switchgear and control gearwiring
Water Immersion test (Absenceof faults in the insulation) BS 6231, Cl.11
430 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated armoured fireresistant cables for rated voltage 600/1000 V for fixedinstallations, having low emission of smoke and corrosivegases when affected by fire
Halogen Acid Test BS 7846 cl.14
431 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated armoured Fireresistant cable of rated voltage 600/1000 V having lowemission of smoke and corrosive gases when affected byfire
Cold Bend test BS 7846, Cl.14
432 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated armoured Fireresistant cable of rated voltage 600/1000 V having lowemission of smoke and corrosive gases when affected byfire
Cold Elongation test BS 7846, Cl.14
433 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated armoured Fireresistant cable of rated voltage 600/1000 V having lowemission of smoke and corrosive gases when affected byfire
Mechanical test Cold Impacttest BS 7846, Cl.14
434 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated armoured Fireresistant cable of rated voltage 600/1000 V having lowemission of smoke and corrosive gases when affected byfire
Water Absorption (Gravimetric) BS 6724, cl.14
435 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated armoured fireresistant cables for rated voltage 600/1000 V for fixedinstallations, having low emission of smoke and corrosivegases when affected by fire
Armour resistivity test BS 7846, Cl.14
436 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated armoured fireresistant cables for rated voltage 600/1000 V for fixedinstallations, having low emission of smoke and corrosivegases when affected by fire
Circuit Integrity test (Fire Alonetest) BS 7846, Cl.14
437 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated armoured fireresistant cables for rated voltage 600/1000 V for fixedinstallations, having low emission of smoke and corrosivegases when affected by fire
Conductor resistance test BS 7846, Cl.14
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 30 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
438 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated armoured fireresistant cables for rated voltage 600/1000 V for fixedinstallations, having low emission of smoke and corrosivegases when affected by fire
Flame Retardance test onBunched Cables BS 7846, Cl.14
439 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated armoured fireresistant cables for rated voltage 600/1000 V for fixedinstallations, having low emission of smoke and corrosivegases when affected by fire
Flame Retardancy test (Flammability test) BS 7846, Cl.14
440 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated armoured Fireresistiant cable of rated voltage 600/1000 V having lowemission of smoke and corrosive gases when affected byfire
Galvanising test (Uniformity ofZinc coating & Mass of Zinccoating)
BS 7846 cl.14
441 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated armoured Fireresistiant cable of rated voltage 600/1000 V having lowemission of smoke and corrosive gases when affected byfire
Annealing test BS 7846, Cl.14
442 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated armoured Fireresistiant cable of rated voltage 600/1000 V having lowemission of smoke and corrosive gases when affected byfire
Breaking strength test(Elongation at break) Bs 7846, Cl.14
443 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated armoured Fireresistiant cable of rated voltage 600/1000 V having lowemission of smoke and corrosive gases when affected byfire
Cold Bend Test BS 7846, Cl.19
444 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated armoured Fireresistiant cable of rated voltage 600/1000 V having lowemission of smoke and corrosive gases when affected byfire
Cold Elongation test BS 7846, Cl.19
445 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated armoured Fireresistiant cable of rated voltage 600/1000 V having lowemission of smoke and corrosive gases when affected byfire
Dielectric withstand test BS 7846, Cl.14
446 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated armoured Fireresistiant cable of rated voltage 600/1000 V having lowemission of smoke and corrosive gases when affected byfire
Dielectric Withstand test BS 7846, Cl.14
447 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated armoured Fireresistiant cable of rated voltage 600/1000 V having lowemission of smoke and corrosive gases when affected byfire
Dimension of Armour Material BS 7846, cl.14
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 31 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
448 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated armoured Fireresistiant cable of rated voltage 600/1000 V having lowemission of smoke and corrosive gases when affected byfire
Insulation Resistance test BS 7846, Cl.14
449 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated armoured Fireresistiant cable of rated voltage 600/1000 V having lowemission of smoke and corrosive gases when affected byfire
IR Constant test BS 7846, Cl.14
450 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated armoured Fireresistiant cable of rated voltage 600/1000 V having lowemission of smoke and corrosive gases when affected byfire
Mechanical test Cold impacttest BS 7846, Cl.14
451 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated armoured Fireresistiant cable of rated voltage 600/1000 V having lowemission of smoke and corrosive gases when affected byfire
Mechanical test Tensile test BS 7846, Cl.14
452 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated armoured Fireresistiant cable of rated voltage 600/1000 V having lowemission of smoke and corrosive gases when affected byfire
Power frequency withstand test BS 7846, Cl.14
453 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated armoured Fireresistiant cable of rated voltage 600/1000 V having lowemission of smoke and corrosive gases when affected byfire
Power frequency withstand test BS 7846, Cl.14
454 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated armoured Fireresistiant cable of rated voltage 600/1000 V having lowemission of smoke and corrosive gases when affected byfire
Thickness and dimension test BS 7846 cl.14
455 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated armoured Fireresistiant cable of rated voltage 600/1000 V having lowemission of smoke and corrosive gases when affected byfire
Torsion test BS 7846, Cl.14
456 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated armoured Fireresistiant cable of rated voltage 600/1000 V having lowemission of smoke and corrosive gases when affected byfire
Volume Resistivity test BS 7846, Cl.14
457 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated armoured Fireresistiant cable of rated voltage 600/1000 V having lowemission of smoke and corrosive gases when affected byfire
Water Absorption (Gravimetric) BS 7846 cl. 14
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 32 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
458 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated armoured Fireresistiant cable of rated voltage 600/1000 V having lowemission of smoke and corrosive gases when affected byfire
Winding test BS 7846, Cl.14
459 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated armoured Fireresistiant cable of rated voltage 600/1000 V having lowemission of smoke and corrosive gases when affected byfire
Wrapping test BS 7846, Cl.14
460 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated non armouredcables for voltages up to and including 450/750 V andhaving low emission of smoke and corrive gases
Galvanising test (Uniformity ofZinc coating & Mass of Zinccoating)
BS 7211 cl.12
461 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated non armouredcables for voltages up to and including 450/750 V andhaving low emission of smoke and corrive gases
Water Absorption (Gravimetric) BS 7211 cl.12
462 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated non armouredcables for voltages up to and including 450/750 V andhaving low emission of smoke and corrosive gases
Ageing in air oven BS 7211, Cl.12
463 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated non armouredcables for voltages up to and including 450/750 V andhaving low emission of smoke and corrosive gases
Annealing test BS 7211, Cl.12
464 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated non armouredcables for voltages up to and including 450/750 V andhaving low emission of smoke and corrosive gases
Breaking Strength (Elongationat break) BS 7211, Cl.12
465 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated non armouredcables for voltages up to and including 450/750 V andhaving low emission of smoke and corrosive gases
Cold Bend test BS 7211, Cl.12
466 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated non armouredcables for voltages up to and including 450/750 V andhaving low emission of smoke and corrosive gases
Cold Elongation test BS 7211, Cl.12
467 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated non armouredcables for voltages up to and including 450/750 V andhaving low emission of smoke and corrosive gases
Conductor Resistance test BS 6724, cl. 14
468 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated non armouredcables for voltages up to and including 450/750 V andhaving low emission of smoke and corrosive gases
Conductor Resistance test BS 7211, Cl.12
469 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated non armouredcables for voltages up to and including 450/750 V andhaving low emission of smoke and corrosive gases
Dielectric withstand test BS 7211, Cl.12
470 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated non armouredcables for voltages up to and including 450/750 V andhaving low emission of smoke and corrosive gases
Dielectric withstand test BS 7211, Cl.12
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 33 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
471 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated non armouredcables for voltages up to and including 450/750 V andhaving low emission of smoke and corrosive gases
Hot set test BS 7211, Cl.12
472 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated non armouredcables for voltages up to and including 450/750 V andhaving low emission of smoke and corrosive gases
Insulation Resistance test BS 7211, Cl.12
473 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated non armouredcables for voltages up to and including 450/750 V andhaving low emission of smoke and corrosive gases
IR Constant test BS 7211, Cl.12
474 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated non armouredcables for voltages up to and including 450/750 V andhaving low emission of smoke and corrosive gases
Loss of mass test BS 7211, Cl.12
475 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated non armouredcables for voltages up to and including 450/750 V andhaving low emission of smoke and corrosive gases
Mechanical test Cold Impacttest BS 7211, Cl.12
476 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated non armouredcables for voltages up to and including 450/750 V andhaving low emission of smoke and corrosive gases
Mechanical test Tensile test BS 7211, Cl.12
477 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated non armouredcables for voltages up to and including 450/750 V andhaving low emission of smoke and corrosive gases
Power Frequency withstandtest BS 7211, Cl.12
478 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated non armouredcables for voltages up to and including 450/750 V andhaving low emission of smoke and corrosive gases
Pressure test at hightemperature BS 7211, Cl.12
479 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated non armouredcables for voltages up to and including 450/750 V andhaving low emission of smoke and corrosive gases
Shrinkage test BS 7211, Cl.12
480 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated non armouredcables for voltages up to and including 450/750 V andhaving low emission of smoke and corrosive gases
Test for Resistance to cracking BS 7211, Cl.12
481 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated non armouredcables for voltages up to and including 450/750 V andhaving low emission of smoke and corrosive gases
Thickness and dimension test BS 7211 cl.12
482 ELECTRICAL- CABLES &WIRES
Electric cables- Thermosetting insulated non armouredcables for voltages up to and including 450/750 V andhaving low emission of smoke and corrosive gases
Volume resistivity test BS 7211, Cl.12
483 ELECTRICAL- CABLES &WIRES
Electric cables. Armoured cables with thermosettinginsulation for rated voltages from 3.8/6.6 kV to 19/33 kVhaving low emission of smoke
Ageing in air oven BS 7835 (cl. 16)
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 34 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
484 ELECTRICAL- CABLES &WIRES
Electric cables. Armoured cables with thermosettinginsulation for rated voltages from 3.8/6.6 kV to 19/33 kVhaving low emission of smoke
Bending test BS 7835 (cl. 16)
485 ELECTRICAL- CABLES &WIRES
Electric cables. Armoured cables with thermosettinginsulation for rated voltages from 3.8/6.6 kV to 19/33 kVhaving low emission of smoke
Capacitance Measurement BS 7835, Cl.16
486 ELECTRICAL- CABLES &WIRES
Electric cables. Armoured cables with thermosettinginsulation for rated voltages from 3.8/6.6 kV to 19/33 kVhaving low emission of smoke
Carbon Black Content test BS 7835 (cl. 16)
487 ELECTRICAL- CABLES &WIRES
Electric cables. Armoured cables with thermosettinginsulation for rated voltages from 3.8/6.6 kV to 19/33 kVhaving low emission of smoke
Cold Bend test BS 7835 (cl. 16)
488 ELECTRICAL- CABLES &WIRES
Electric cables. Armoured cables with thermosettinginsulation for rated voltages from 3.8/6.6 kV to 19/33 kVhaving low emission of smoke
Cold Elongation test BS 7835 (cl. 16)
489 ELECTRICAL- CABLES &WIRES
Electric cables. Armoured cables with thermosettinginsulation for rated voltages from 3.8/6.6 kV to 19/33 kVhaving low emission of smoke
Conditioning test BS 7835 (cl. 16)
490 ELECTRICAL- CABLES &WIRES
Electric cables. Armoured cables with thermosettinginsulation for rated voltages from 3.8/6.6 kV to 19/33 kVhaving low emission of smoke
Dielectric Strength test BS 7835 (cl. 16)
491 ELECTRICAL- CABLES &WIRES
Electric cables. Armoured cables with thermosettinginsulation for rated voltages from 3.8/6.6 kV to 19/33 kVhaving low emission of smoke
Dielectric Withstand test BS 7835 (cl. 16)
492 ELECTRICAL- CABLES &WIRES
Electric cables. Armoured cables with thermosettinginsulation for rated voltages from 3.8/6.6 kV to 19/33 kVhaving low emission of smoke
Dimension of Armour Material BS 7835, cl.16
493 ELECTRICAL- CABLES &WIRES
Electric cables. Armoured cables with thermosettinginsulation for rated voltages from 3.8/6.6 kV to 19/33 kVhaving low emission of smoke
Electrical Heat Cycle test BS 7835 (cl. 16)
494 ELECTRICAL- CABLES &WIRES
Electric cables. Armoured cables with thermosettinginsulation for rated voltages from 3.8/6.6 kV to 19/33 kVhaving low emission of smoke
Flame Retardance test(Flammability test) BS 7835 (cl. 16)
495 ELECTRICAL- CABLES &WIRES
Electric cables. Armoured cables with thermosettinginsulation for rated voltages from 3.8/6.6 kV to 19/33 kVhaving low emission of smoke
Flame Retardant test onBunched Cables BS 7835 (cl. 16)
496 ELECTRICAL- CABLES &WIRES
Electric cables. Armoured cables with thermosettinginsulation for rated voltages from 3.8/6.6 kV to 19/33 kVhaving low emission of smoke
Heat Shock test BS 7835 (cl. 16)
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 35 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
497 ELECTRICAL- CABLES &WIRES
Electric cables. Armoured cables with thermosettinginsulation for rated voltages from 3.8/6.6 kV to 19/33 kVhaving low emission of smoke
Hot Deformation test BS 7835 (cl. 16)
498 ELECTRICAL- CABLES &WIRES
Electric cables. Armoured cables with thermosettinginsulation for rated voltages from 3.8/6.6 kV to 19/33 kVhaving low emission of smoke
Hot set test BS 7835 (cl. 16)
499 ELECTRICAL- CABLES &WIRES
Electric cables. Armoured cables with thermosettinginsulation for rated voltages from 3.8/6.6 kV to 19/33 kVhaving low emission of smoke
Impulse withstand Test BS 7835, cl.16
500 ELECTRICAL- CABLES &WIRES
Electric cables. Armoured cables with thermosettinginsulation for rated voltages from 3.8/6.6 kV to 19/33 kVhaving low emission of smoke
Insulation Resistance test BS 7835 (cl. 16)
501 ELECTRICAL- CABLES &WIRES
Electric cables. Armoured cables with thermosettinginsulation for rated voltages from 3.8/6.6 kV to 19/33 kVhaving low emission of smoke
IR Constant test BS 7835 (cl. 16)
502 ELECTRICAL- CABLES &WIRES
Electric cables. Armoured cables with thermosettinginsulation for rated voltages from 3.8/6.6 kV to 19/33 kVhaving low emission of smoke
Loss of mass test BS 7835 (cl. 16)
503 ELECTRICAL- CABLES &WIRES
Electric cables. Armoured cables with thermosettinginsulation for rated voltages from 3.8/6.6 kV to 19/33 kVhaving low emission of smoke
Mechanical test Cold impacttest BS 7835 (cl. 16)
504 ELECTRICAL- CABLES &WIRES
Electric cables. Armoured cables with thermosettinginsulation for rated voltages from 3.8/6.6 kV to 19/33 kVhaving low emission of smoke
Power frequency withstand test BS 7835 (cl. 16)
505 ELECTRICAL- CABLES &WIRES
Electric cables. Armoured cables with thermosettinginsulation for rated voltages from 3.8/6.6 kV to 19/33 kVhaving low emission of smoke
Power frequency withstand test BS 7835 (cl. 16)
506 ELECTRICAL- CABLES &WIRES
Electric cables. Armoured cables with thermosettinginsulation for rated voltages from 3.8/6.6 kV to 19/33 kVhaving low emission of smoke
Pressure test at hightemperature BS 7835 (cl. 16)
507 ELECTRICAL- CABLES &WIRES
Electric cables. Armoured cables with thermosettinginsulation for rated voltages from 3.8/6.6 kV to 19/33 kVhaving low emission of smoke
Shrinkage test BS 7835 (cl. 16)
508 ELECTRICAL- CABLES &WIRES
Electric cables. Armoured cables with thermosettinginsulation for rated voltages from 3.8/6.6 kV to 19/33 kVhaving low emission of smoke
Tan Delta Measurement atambient &elevatedtemperature
BS-7835, cl.16
509 ELECTRICAL- CABLES &WIRES
Electric cables. Armoured cables with thermosettinginsulation for rated voltages from 3.8/6.6 kV to 19/33 kVhaving low emission of smoke
Test for Resistance to cracking BS 7835 (cl. 16)
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 36 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
510 ELECTRICAL- CABLES &WIRES
Electric cables. Armoured cables with thermosettinginsulation for rated voltages from 3.8/6.6 kV to 19/33 kVhaving low emission of smoke
Torsion test BS 7835 (cl. 16)
511 ELECTRICAL- CABLES &WIRES
Electric cables. Armoured cables with thermosettinginsulation for rated voltages from 3.8/6.6 kV to 19/33 kVhaving low emission of smoke
Volume Resistivity test BS 7835 (cl. 16)
512 ELECTRICAL- CABLES &WIRES
Electric cables. Armoured cables with thermosettinginsulation for rated voltages from 3.8/6.6 kV to 19/33 kVhaving low emission of smoke
Water Absorption (Gravimetric) BS 7835, cl.16
513 ELECTRICAL- CABLES &WIRES
Electric cables. Armoured cables with thermosettinginsulation for rated voltages from 3.8/6.6 kV to 19/33 kVhaving low emission of smoke
Water Penetration test BS 7835 (cl. 16)
514 ELECTRICAL- CABLES &WIRES
Electric cables. Armoured cables with thermosettinginsulation for rated voltages from 3.8/6.6 kV to 19/33 kVhaving low emission of smoke
Winding test BS 7835 (cl. 16)
515 ELECTRICAL- CABLES &WIRES
Electric cables. Armoured cables with thermosettinginsulation for rated voltages from 3.8/6.6 kV to 19/33 kVhaving low emission of smoke
Wrapping test BS 7835 (cl. 16)
516 ELECTRICAL- CABLES &WIRES
Electric Power connectors Compression & mechanicalconnector for power cables
Electric Power connectorsCompression & mechanicalconnector for power cables
IS 5561 2013, IEC 61238-1
517 ELECTRICAL- CABLES &WIRES
Extruded power Cables- for working voltages for 1.1kV upto 3.3 kV, from 3.3kV (UE) to up to and including 33 kV(E) Load Cycle test iS 13573 Part-1, 2 & 3
518 ELECTRICAL- CABLES &WIRES
Extruded power Cables- for working voltages for 1.1kV upto 3.3 kV, from 3.3kV (UE) to up to and including 33 kV(E) Load Cycle test IS 13573, part-1, 2 & 3
519 ELECTRICAL- CABLES &WIRES
Flammability of solid electrical insulating materials whenexposed to an igniting source
Flame Retardant test(Flammability test) UL 94-2013 & IEC 60695-11-10
520 ELECTRICAL- CABLES &WIRES
HFFR cables for working voltages upto and including 1100Volts Ageing in Air Oven Table 2 Cl. III c(vi), Cl.IIIe(ii) of
IS 17048
521 ELECTRICAL- CABLES &WIRES
HFFR cables for working voltages upto and including 1100Volts
Cold bend test (MandrelDiameter: 5mm to 130 mm) Table 2 Cl.III f(iii) of IS 1704
522 ELECTRICAL- CABLES &WIRES
HFFR cables for working voltages upto and including 1100Volts Cold impact test Table 2 III c(x), Cl.III f(iv) of IS
17048 of
523 ELECTRICAL- CABLES &WIRES
HFFR cables for working voltages upto and including 1100Volts Conductor Resistance test Table 2 Cl. II, Cl.d and Cl.III9i)
of IS 17048
524 ELECTRICAL- CABLES &WIRES
HFFR cables for working voltages upto and including 1100Volts Elongation at Break
Table 2 Cl. II(a), Cl.II(f),Cl.IIIa(iv), CL.IIIa(ii), Cl.c andCl.e of IS 17048
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 37 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
525 ELECTRICAL- CABLES &WIRES
HFFR cables for working voltages upto and including 1100Volts Flammability test
Table 2 Cl. II(j), Cl.III c(xiii), Cl.III f(v), Cl.III f(ii) , Cl.III f(iv) of IS17048
526 ELECTRICAL- CABLES &WIRES
HFFR cables for working voltages upto and including 1100Volts
Halogen acid test/ pH andconductivity test
Table 2 Cl. II k, Cl.IIIc(viii), Cl.IIIe(viii) of IS 17048
527 ELECTRICAL- CABLES &WIRES
HFFR cables for working voltages upto and including 1100Volts
High voltage test/Waterimmersion test
Table 2 Cl. I(a), Cl.II(h),Cl.IIIc(ii),Cl.IIIf(i) of IS 17048
528 ELECTRICAL- CABLES &WIRES
HFFR cables for working voltages upto and including 1100Volts Hot Deformation Test Table 2 Cl. IIIc(vii), Cl.e(vi) of IS
17048
529 ELECTRICAL- CABLES &WIRES
HFFR cables for working voltages upto and including 1100Volts Hot set test Table 2 Cl. II(m), Cl.IIIc(xi),
Cl.IIIe(viii) of IS 17048
530 ELECTRICAL- CABLES &WIRES
HFFR cables for working voltages upto and including 1100Volts
Insulation Resistancetest/Volume Resistivity test
Table 2 Cl. II(g), Cl.IIIc(iii) of IS17048
531 ELECTRICAL- CABLES &WIRES
HFFR cables for working voltages upto and including 1100Volts Oxygen Index Test Table 2 Cl. III c(iv), Cl.IIIe(iii) of
IS 17048
532 ELECTRICAL- CABLES &WIRES
HFFR cables for working voltages upto and including 1100Volts Persulphate test Table 2 Cl. II c(iii), Cl.III a(iii) of
IS 17048:2018, IS 10810 Part 4
533 ELECTRICAL- CABLES &WIRES
HFFR cables for working voltages upto and including 1100Volts Smoke density test Table 2 Cl. III f (vii) of IS 17048
534 ELECTRICAL- CABLES &WIRES
HFFR cables for working voltages upto and including 1100Volts Temperature index test Table 2 Cl.IIIc(iv), Cl.IIIe(iv) of
IS 1704
535 ELECTRICAL- CABLES &WIRES
HFFR cables for working voltages upto and including 1100Volts Tensile strength test
Table 2 Cl. II(a), Cl.II(f),Cl.IIIa(iv), Cl.c and Cl.e of IS17048
536 ELECTRICAL- CABLES &WIRES
HFFR cables for working voltages upto and including 1100Volts Thickness and Dimension test Table 2 Cl. II(e), Cl.III(b) of IS
1704
537 ELECTRICAL- CABLES &WIRES
HFFR cables for working voltages upto and including 1100Volts Water immersion test-DC Table 2 Cl. IIIf(vi) of IS 17048
538 ELECTRICAL- CABLES &WIRES
HFFR cables for working voltages upto and including 1100Volts Wrapping test Table 2 Cl.II b, Cl.III a (iv) of IS
17048
539 ELECTRICAL- CABLES &WIRES High voltage test facility Impulse voltage Dielectric test IS 2071 – 1993 (RA 2014) IEC
60060-1: 2010 IEC 60060-2
540 ELECTRICAL- CABLES &WIRES
IEEE standard for extruded and laminated dielectricshielded cable joints rated 2500 V to 500 kV Impulse withstand Test IEEE Std 404
541 ELECTRICAL- CABLES &WIRES
Instrument Transformers- Additional Requirements forCapacitor Voltage Transformers Tan Delta Measurement IEC 61869-5, cl.7.4.3
542 ELECTRICAL- CABLES &WIRES
Instrument Transformers- Additional Requirements forCapacitor Voltage Transformers Capacitance Measurement IEC 61869-5, Cl.7.4.3
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 38 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
543 ELECTRICAL- CABLES &WIRES
Instrument Transformers- Additional Requirements forCapacitor Voltage Transformers Partial Discharge test IEC 61869-5 (Cl.7.3.2)
544 ELECTRICAL- CABLES &WIRES
Instrument Transformers- Additional Requirements forCapacitor Voltage Transformers Partial Discharge test IS 16227 Part-V
545 ELECTRICAL- CABLES &WIRES
Instrument Transformers- Additional Requirements forcurrent Transformers Capacitance Measurement IEC 61869-2(Cl.7.4.3.),
546 ELECTRICAL- CABLES &WIRES
Instrument Transformers- Additional Requirements forcurrent Transformers Capacitance Measurement IS -16227-2
547 ELECTRICAL- CABLES &WIRES
Instrument Transformers- Additional Requirements forcurrent Transformers Partial discharge Test IEC 61869-2 cl. 7.3.1
548 ELECTRICAL- CABLES &WIRES
Instrument Transformers- Additional Requirements forcurrent Transformers Partial Discharge test IS 16227 Part-II
549 ELECTRICAL- CABLES &WIRES
Instrument Transformers- Additional Requirements forcurrent Transformers Tan Delta Measurement IEC 61869-2, Cl. 7.4.3
550 ELECTRICAL- CABLES &WIRES
Instrument Transformers- Additional Requirements forcurrent Transformers Tan Delta Measurement IS -16227-2
551 ELECTRICAL- CABLES &WIRES
Instrument Transformers- Additional Requirements forVoltage Transformers Capacitance Measurement IEC 61869-3 (Cl.7.4.3)
552 ELECTRICAL- CABLES &WIRES
Instrument Transformers- Additional Requirements forVoltage Transformers Capacitance Measurement IS-16227-5
553 ELECTRICAL- CABLES &WIRES
Instrument Transformers- Additional Requirements forVoltage Transformers Tan Delta Measurement IEC 61869 part 3
554 ELECTRICAL- CABLES &WIRES
Instrument Transformers- Additional Requirements forVoltage Transformers Tan Delta Measurement IS-16227-5
555 ELECTRICAL- CABLES &WIRES Instrument Transformers- General Requirements Capacitance Measurement IEC 61869-1, cl. 7.4.3
556 ELECTRICAL- CABLES &WIRES Instrument Transformers- General Requirements Capacitance Measurement IS 16227-1
557 ELECTRICAL- CABLES &WIRES Instrument Transformers- General Requirements Partial discharge Test IEC 61869-1, cl. 7.3.2
558 ELECTRICAL- CABLES &WIRES Instrument Transformers- General Requirements Partial Discharge test IS-16227 Part-I
559 ELECTRICAL- CABLES &WIRES Instrument Transformers- General Requirements Tan Delta Measurement IS 16227-1
560 ELECTRICAL- CABLES &WIRES Instrument Transformers- General Requirements Tan Delta Measurement at
ambient IEC 61869-1, cl. 7.4.3
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 39 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
561 ELECTRICAL- CABLES &WIRES Insulated Bushing for alternating voltages above 1000V Partial Discharge test IEC 60137 ( Cl. 9.5)
562 ELECTRICAL- CABLES &WIRES
Insulated Cables and their accessories for power systemsinsulating piercing branch connectors for overheaddistribution and services with bundle assembled cores ofrated Voltage 0.6 /1 kV
Temperature Rise test NFC: 33-020
563 ELECTRICAL- CABLES &WIRES
Insulated Cables and their accessories for power systemsinsulating piercing branch connectors for overheaddistribution and services with bundle assembled cores ofrated Voltage 0.6 /1 kV
Resistance measurement NFC: 33-020
564 ELECTRICAL- CABLES &WIRES
Insulated Cables and their accessories for power systemsinsulating piercing branch connectors for overheaddistribution and services with bundle assembled cores ofrated Voltage 0.6 /1 kV
Resistance measurement NFC: 33-020
565 ELECTRICAL- CABLES &WIRES IS 2099, Am1, Am2: 1986 Power frequency withstand test IS 2099, Am1, Am2:
566 ELECTRICAL- CABLES &WIRES
Joints & Terminations of Polymeric cables for workingvoltages from 6.6 kV – 33 kV Short time current test
IS 13573(Part 1):2011 (RA:2016) IS 13573(Part 2):2011(RA: 2016) IS 13573(Part3):2011 (RA : 2016) IEC60502-4:2010 IEC 61442
567 ELECTRICAL- CABLES &WIRES
Joints and Termination of Polymeric Cables for workingvoltages from 6.6kV up to and including 33 kV Mechanical Test: Impact Test IS 13573 part 2 & part 3
568 ELECTRICAL- CABLES &WIRES
LV & MV Polymeric Insulated Cables for use by distributionand generation Utilites-Specification for distribution cableswith extruded insulation or rated voltages of 11 kV to 33
Ageing in air bomb BS 7870-4.10, Table 5
569 ELECTRICAL- CABLES &WIRES
LV & MV Polymeric Insulated Cables for use by distributionand generation Utilites-Specification for distribution cableswith extruded insulation or rated voltages of 11 kV to 33
Ageing in air oven BS 7870-4.10, Table 5
570 ELECTRICAL- CABLES &WIRES
LV & MV Polymeric Insulated Cables for use by distributionand generation Utilites-Specification for distribution cableswith extruded insulation or rated voltages of 11 kV to 33
Annealing test BS 7870-1
571 ELECTRICAL- CABLES &WIRES
LV & MV Polymeric Insulated Cables for use by distributionand generation Utilites-Specification for distribution cableswith extruded insulation or rated voltages of 11 kV to 33
Armour Resistivity test BS 7870-4.10, Table 5
572 ELECTRICAL- CABLES &WIRES
LV & MV Polymeric Insulated Cables for use by distributionand generation Utilites-Specification for distribution cableswith extruded insulation or rated voltages of 11 kV to 33
Breaking Strength (Elongationat break test) BS 7870-1
573 ELECTRICAL- CABLES &WIRES
LV & MV Polymeric Insulated Cables for use by distributionand generation Utilites-Specification for distribution cableswith extruded insulation or rated voltages of 11 kV to 33
Carbon Black content test BS 7870-4.10, Table 5
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 40 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
574 ELECTRICAL- CABLES &WIRES
LV & MV Polymeric Insulated Cables for use by distributionand generation Utilites-Specification for distribution cableswith extruded insulation or rated voltages of 11 kV to 33
Conductor Resistance test BS 7870-4.10, Table 5
575 ELECTRICAL- CABLES &WIRES
LV & MV Polymeric Insulated Cables for use by distributionand generation Utilites-Specification for distribution cableswith extruded insulation or rated voltages of 11 kV to 33
Dielectric strength test BS 7870-4.10, Am1, Table. 5
576 ELECTRICAL- CABLES &WIRES
LV & MV Polymeric Insulated Cables for use by distributionand generation Utilites-Specification for distribution cableswith extruded insulation or rated voltages of 11 kV to 33
Dielectric withstand test BS 7870-4.10, Am1, Table 5
577 ELECTRICAL- CABLES &WIRES
LV & MV Polymeric Insulated Cables for use by distributionand generation Utilites-Specification for distribution cableswith extruded insulation or rated voltages of 11 kV to 33
Heat Shock test BS 7870-4.10, Table 5
578 ELECTRICAL- CABLES &WIRES
LV & MV Polymeric Insulated Cables for use by distributionand generation Utilites-Specification for distribution cableswith extruded insulation or rated voltages of 11 kV to 33
Hot Deformation test BS 7870-4.10, Table 5
579 ELECTRICAL- CABLES &WIRES
LV & MV Polymeric Insulated Cables for use by distributionand generation Utilites-Specification for distribution cableswith extruded insulation or rated voltages of 11 kV to 33
Hot set test BS 7870-4.10, Table 5
580 ELECTRICAL- CABLES &WIRES
LV & MV Polymeric Insulated Cables for use by distributionand generation Utilites-Specification for distribution cableswith extruded insulation or rated voltages of 11 kV to 33
Impulse withstand test BS-7870-4.10-A1 Table 5
581 ELECTRICAL- CABLES &WIRES
LV & MV Polymeric Insulated Cables for use by distributionand generation Utilites-Specification for distribution cableswith extruded insulation or rated voltages of 11 kV to 33
Loss of mass test BS 7870-4.10, Table 5
582 ELECTRICAL- CABLES &WIRES
LV & MV Polymeric Insulated Cables for use by distributionand generation Utilites-Specification for distribution cableswith extruded insulation or rated voltages of 11 kV to 33
Mechanical Test Tensile test BS 7870-1
583 ELECTRICAL- CABLES &WIRES
LV & MV Polymeric Insulated Cables for use by distributionand generation Utilites-Specification for distribution cableswith extruded insulation or rated voltages of 11 kV to 33
Power frequency withstand test BS 7870-4.10, Am1, Table 5
584 ELECTRICAL- CABLES &WIRES
LV & MV Polymeric Insulated Cables for use by distributionand generation Utilites-Specification for distribution cableswith extruded insulation or rated voltages of 11 kV to 33
Power frequency withstand test BS 7870-4.10, Am1, Table 5
585 ELECTRICAL- CABLES &WIRES
LV & MV Polymeric Insulated Cables for use by distributionand generation Utilites-Specification for distribution cableswith extruded insulation or rated voltages of 11 kV to 33
Pressure test at hightemperature BS 7870-4.10, Table 5
586 ELECTRICAL- CABLES &WIRES
LV & MV Polymeric Insulated Cables for use by distributionand generation Utilites-Specification for distribution cableswith extruded insulation or rated voltages of 11 kV to 33
Shrinkage test BS 7870-4.10, Table 5
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 41 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
587 ELECTRICAL- CABLES &WIRES
LV & MV Polymeric Insulated Cables for use by distributionand generation Utilites-Specification for distribution cableswith extruded insulation or rated voltages of 11 kV to 33
Test for Resistance to cracking BS 7870-4.10, Table 5
588 ELECTRICAL- CABLES &WIRES
LV & MV Polymeric Insulated Cables for use by distributionand generation Utilites-Specification for distribution cableswith extruded insulation or rated voltages of 11 kV to 33 kV
Capacitance Measurement BS-7870-4.10,Table 5
589 ELECTRICAL- CABLES &WIRES
LV & MV Polymeric Insulated Cables for use by distributionand generation Utilites-Specification for distribution cableswith extruded insulation or rated voltages of 11 kV to 33 kV
Electrical Heat Cycle test BS 7870-4.10, Table 5
590 ELECTRICAL- CABLES &WIRES
LV & MV Polymeric Insulated Cables for use by distributionand generation Utilites-Specification for distribution cableswith extruded insulation or rated voltages of 11 kV to 33 kV
Partial Discharge test BS-7870-4.10-, A1 Table 5
591 ELECTRICAL- CABLES &WIRES
LV & MV Polymeric Insulated Cables for use by distributionand generation Utilites-Specification for distribution cableswith extruded insulation or rated voltages of 11 kV to 33 kV
Tan delta at ambient andelevated temperature BS-7870-4.10-A1 ,Table 5
592 ELECTRICAL- CABLES &WIRES
LV & MV Polymeric Insulated Cables for use by distributionand generation Utilites-Specification for distribution cableswith extruded insulation or rated voltages of 11 kV to 33 kV
Water penetration test BS 7870-4.10, Table 5
593 ELECTRICAL- CABLES &WIRES
Measurement of Smoke Density of Electric Cables burningunder defined conditions- Test Apparatus Smoke Density Test IEC 61034 part 1 & 2
594 ELECTRICAL- CABLES &WIRES
Measuring the minimum oxygen concentration to supportcandle like combustion of plastics Oxygen Index test ASTM 2863
595 ELECTRICAL- CABLES &WIRES
Measuring the minimum oxygen concentration to supportcandle like combustion of plastics Temperature Index test ASTM D 2863
596 ELECTRICAL- CABLES &WIRES
Method for determination of mass of zinc coating on zinccoated iron and steel articles
Galvanising test (Uniformity ofZinc coating & Mass of Zinccoating)
IS 6745
597 ELECTRICAL- CABLES &WIRES
Method for testing Uniformity of Coating on Zinc coatedArticles
Galvanising test (Uniformity ofZinc coating & Mass of Zinccoating)
IS 2633
598 ELECTRICAL- CABLES &WIRES
Method of Test for determination of Flammability of solidelectrical insulating materials when exposed to an ignitingsource
Fire retardant/ Flammability IS 11731 pt. 1& 2
599 ELECTRICAL- CABLES &WIRES
Mild Steel wires, Formed wires And tapes For armouring ofCables
Galvanising test (Uniformity ofZinc coating & Mass of Zinccoating)
IS 3975, cl.9
600 ELECTRICAL- CABLES &WIRES Oxygen Index Oxygen Index test NCD 1410
601 ELECTRICAL- CABLES &WIRES Oxygen Index Test, Temperature Index Test Oxygen Index Test &
Temperature Index testIS 10810 pt. 58 :1998, IS10810 pt.64
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 42 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
602 ELECTRICAL- CABLES &WIRES
Paper Insulated Lead Sheathed Cables for rated Voltagesup to and including 33 kV Dimension of Armour Material IS 629, cl.24
603 ELECTRICAL- CABLES &WIRES
Paper Insulated Lead Sheathed Cables for rated Voltagesup to and including 33 kV Ageing in air oven IS 692 cl.24
604 ELECTRICAL- CABLES &WIRES
Paper Insulated Lead Sheathed Cables for rated Voltagesup to and including 33 kV Armour Resistivity Test IS 692 cl.24
605 ELECTRICAL- CABLES &WIRES
Paper Insulated Lead Sheathed Cables for rated Voltagesup to and including 33 kV Breaking strength test IS 692 cl.24
606 ELECTRICAL- CABLES &WIRES
Paper Insulated Lead Sheathed Cables for rated Voltagesup to and including 33 kV Conductor Resistance test IS 692 cl.24
607 ELECTRICAL- CABLES &WIRES
Paper Insulated Lead Sheathed Cables for rated Voltagesup to and including 33 kV Dielectric Strength Test IS 692 cl.24
608 ELECTRICAL- CABLES &WIRES
Paper Insulated Lead Sheathed Cables for rated Voltagesup to and including 33 kV Dielectric Strength test IS 692 cl.24
609 ELECTRICAL- CABLES &WIRES
Paper Insulated Lead Sheathed Cables for rated Voltagesup to and including 33 kV Drainage Test IS 692 cl.24
610 ELECTRICAL- CABLES &WIRES
Paper Insulated Lead Sheathed Cables for rated Voltagesup to and including 33 kV Dripping Test IS 692 cl.24
611 ELECTRICAL- CABLES &WIRES
Paper Insulated Lead Sheathed Cables for rated Voltagesup to and including 33 kV
Flame Retardant test(Flammability test) IS 692 cl.24
612 ELECTRICAL- CABLES &WIRES
Paper Insulated Lead Sheathed Cables for rated Voltagesup to and including 33 kV
Galvanising test (Uniformity ofZinc coating & Mass of Zinccoating)
IS 692 Am I, am II (Cl.24)
613 ELECTRICAL- CABLES &WIRES
Paper Insulated Lead Sheathed Cables for rated Voltagesup to and including 33 kV Heat Shock test IS 692 cl.24
614 ELECTRICAL- CABLES &WIRES
Paper Insulated Lead Sheathed Cables for rated Voltagesup to and including 33 kV Hot Deformation Test IS 692 cl.24
615 ELECTRICAL- CABLES &WIRES
Paper Insulated Lead Sheathed Cables for rated Voltagesup to and including 33 kV Insulation Resistance test IS 692 cl.24
616 ELECTRICAL- CABLES &WIRES
Paper Insulated Lead Sheathed Cables for rated Voltagesup to and including 33 kV IR Constant IS 692 cl.24
617 ELECTRICAL- CABLES &WIRES
Paper Insulated Lead Sheathed Cables for rated Voltagesup to and including 33 kV Loss of Mass test IS 692 cl.24
618 ELECTRICAL- CABLES &WIRES
Paper Insulated Lead Sheathed Cables for rated Voltagesup to and including 33 kV
Mechanical test Tensilestrength test IS 692 cl.24
619 ELECTRICAL- CABLES &WIRES
Paper Insulated Lead Sheathed Cables for rated Voltagesup to and including 33 kV Power frequency withstand test IS 692 cl.24
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 43 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
620 ELECTRICAL- CABLES &WIRES
Paper Insulated Lead Sheathed Cables for rated Voltagesup to and including 33 kV Power frequency withstand test IS 692 cl.24
621 ELECTRICAL- CABLES &WIRES
Paper Insulated Lead Sheathed Cables for rated Voltagesup to and including 33 kV
Pressure test at HighTemperature IS 692 cl.24
622 ELECTRICAL- CABLES &WIRES
Paper Insulated Lead Sheathed Cables for rated Voltagesup to and including 33 kV Shrinkage test IS 692 cl.24
623 ELECTRICAL- CABLES &WIRES
Paper Insulated Lead Sheathed Cables for rated Voltagesup to and including 33 kV
Tan Delta Measurement atambient and elevatedtemperature
IS 692, cl.24
624 ELECTRICAL- CABLES &WIRES
Paper Insulated Lead Sheathed Cables for rated Voltagesup to and including 33 kV Tear Resistance test IS 692 cl.24
625 ELECTRICAL- CABLES &WIRES
Paper Insulated Lead Sheathed Cables for rated Voltagesup to and including 33 kV Tests for resistance to cracking IS 692 cl.24
626 ELECTRICAL- CABLES &WIRES
Paper Insulated Lead Sheathed Cables for rated Voltagesup to and including 33 kV Thickness and dimension test IS 692-1994, cl.24, BS 6480,
cl.19
627 ELECTRICAL- CABLES &WIRES
Paper Insulated Lead Sheathed Cables for rated Voltagesup to and including 33 kV Volume Resistivity Test IS 692 cl.24
628 ELECTRICAL- CABLES &WIRES
Polyvinyl Chloride Insulated Cables of rated Voltages up toand including 450/750 Volts Annealing test IEC 60227 (Part I to VI), Cl.12
629 ELECTRICAL- CABLES &WIRES
Polyvinyl Chloride Insulated Cables of rated Voltages up toand including 450/750 Volts
Breaking Strength test (Elongation at break test) IEC 60227 (Part I to VI), Cl.12
630 ELECTRICAL- CABLES &WIRES
Polyvinyl Chloride Insulated Cables of rated Voltages up toand including 450/750 Volts Conductor Resistance test IEC 60227(Part I to VI), Cl.12
631 ELECTRICAL- CABLES &WIRES
Polyvinyl Chloride Insulated Cables of rated Voltages up toand including 450/750 Volts Mechanical test Tensile test IEC 60227 (Part I to VI), Cl.12
632 ELECTRICAL- CABLES &WIRES
Power Cable Accessories with Nominal voltages 3.3kV upto30 kV Load Cycle test DIN VDE 0278-629-1
633 ELECTRICAL- CABLES &WIRES
Power Cable Accessories with Nominal voltages 3.3kV upto30 kV Load Cycle test DIN VDE 0278-629-1
634 ELECTRICAL- CABLES &WIRES
Power Cable Accessories with Nominal voltages U up to 30kV Dielectric strength test DIN VDE 0278-629-1
635 ELECTRICAL- CABLES &WIRES
Power Cable Accessories with Nominal voltages U up to 30kV Dielectric Strength test DIN VDE 0278-629-1
636 ELECTRICAL- CABLES &WIRES
Power Cable Accessories with Nominal voltages U up to 30kV Impulse withstand test DIN 61442
637 ELECTRICAL- CABLES &WIRES
Power Cable Accessories with Nominal voltages U up to 30kV Power frequency test DIN VDE 0278-629-1
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 44 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
638 ELECTRICAL- CABLES &WIRES
Power Cable Accessories with Nominal voltages U up to 30kV Power Frequency test DIN VDE 0278-629-1
639 ELECTRICAL- CABLES &WIRES
Power Cable Accessories with Nominal voltages U up to 36kV DC withstand Test DIN VDE 0278-629-1
640 ELECTRICAL- CABLES &WIRES
Power Cable Accessories with Nominal voltages U upto 30kV Mechanical Test: Impact Test DIN VDE 0278-629-1
641 ELECTRICAL- CABLES &WIRES
Power Cable Accessories with Nominal voltages U upto 30kV
Mechanical test Cold Impacttest IEC 60502-4
642 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessoires– from 150 kV to 500 kV Ageing in air oven IEC 62067, Cl.12
643 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessoires– from 150 kV to 500 kV
Breaking Strength test(Elongation at break test) IEC 62067 cl.12
644 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessoires– from 150 kV to 500 kV Hot set test IEC 60227 cl.12
645 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessoires– from 150 kV to 500 kV Loss of mass test IEC 60227 cl.12
646 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessoires– from 150 kV to 500 kV Mechanical test Tensile test IEC 60227 cl.12
647 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessoires– from 150 kV to 500 kV Mineral Oil Immersion test IEC 60227 cl.12
648 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessoires– from 150 kV to 500 kV
Pressure test at hightemperature IEC 60227 cl.12
649 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessoires– from 150 kV to 500 kV Resistance to cracking tset IEC 60227 cl.12
650 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessoires– from 150 kV to 500 kV Shrinkage test IEC 60227 cl.12
651 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessoires– from 150 kV to 500 kV
Thermal Stability Test for PVCmaterial IEC 60227 cl.12
652 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessories– for rated voltages 6 kV to 30 kV- Test Requirements ofaccessories
Partial discharge Test IEC 60502-4, Table 5,6,&7
653 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessories– from 150 kV to 500 kV Ageing in air ocen IEC 62067, cl. 12
654 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessories– from 150 kV to 500 kV Annealing test IEC 60227 cl.12
655 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessories– from 150 kV to 500 kV Bending test IEC 62067, Cl.12
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 45 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
656 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessories– from 150 kV to 500 kV
Breaking Strength test(Elongation at break test) IEC 60227 cl.12
657 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessories– from 150 kV to 500 kV Carbon Black content test IEC 62067, Cl.12
658 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessories– from 150 kV to 500 kV Dielectric Withstand test IEC 60227 cl.12
659 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessories– from 150 kV to 500 kV Dielectric withstand test IEC 60227 cl.12
660 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessories– from 150 kV to 500 kV
Fire Retardant FlammabilityTest IEC 60227 cl.12
661 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessories– from 150 kV to 500 kV Hot set test IEC 62067, Cl.12
662 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessories– from 150 kV to 500 kV Loss of mass test IEC 62067, Cl.12
663 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessories– from 150 kV to 500 kV Mechanical test Tensile test IEC 62067 cl.12
664 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessories– from 150 kV to 500 kV Partial discharge Test IEC 62067 (cl. 12)
665 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessories– from 150 kV to 500 kV Power frequency withstand test IEC 62067 cl.12
666 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessories– from 150 kV to 500 kV Power frequency withstand test IEC 62067 cl.12
667 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessories– from 150 kV to 500 kV
Pressure test at hightemperature IEC 62067, Cl.12
668 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessories– from 150 kV to 500 kV Shrinkage test IEC 62067, cl. 12
669 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessories– from 150 kV to 500 kV
Test for Resistance to crackingtest IEC 62067, Cl.12
670 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessories– from 30 kV to 150 kV Ageing in air oven IEC 60840, Cl.12
671 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessories– from 30 kV to 150 kV Bending test IEC 60840, Cl.12
672 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessories– from 30 kV to 150 kV
Breaking strength test(Elongation at break test) IEC 60840, Cl.12
673 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessories– from 30 kV to 150 kV Carbon Black content test IEC 60840, Cl.12
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 46 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
674 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessories– from 30 kV to 150 kV
Flame Retardant test(Flammability test) IEC 60840, Cl.12
675 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessories– from 30 kV to 150 kV Hot set tes IEC 60840, Cl.12
676 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessories– from 30 kV to 150 kV Impulse withstand test IEC 60840, Cl.12
677 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessories– from 30 kV to 150 kV Loss of mass test IEC 60840, Cl.12
678 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessories– from 30 kV to 150 kV Mechanical test Tensile test IEC 60840, Cl.12
679 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessories– from 30 kV to 150 kV Pre Qualification test IEC 60840, Cl.12
680 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessories– from 30 kV to 150 kV
Pressure test at hightemperature IEC 60840, Cl.12
681 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessories– from 30 kV to 150 kV Shrinkage test IEC 60840, Cl.12
682 ELECTRICAL- CABLES &WIRES
Power Cable with Extruded Insulation and their accessories– from 30 kV to 150 kV Test for Resistance to cracking IEC 60840, Cl.12
683 ELECTRICAL- CABLES &WIRES Power Cables from 3.6/6 kV up to 20.8/36 kV Load Cycle test DIN EN 61442
684 ELECTRICAL- CABLES &WIRES Power Cables from 3.6/6 kV up to 20.8/36 kV Load Cycle test DIN EN 61442
685 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesCables for rated voltages 1 kV up to 3 kV Thickness and dimension test IEC 60502 part 1cl.18
686 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 6 kV up to 30 kV Impulse withstand Test IEC 60502 part 2 cl.17
687 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 1 kV up to 3 kV
Power Frequency WithstandTest/ Dielectric strength IEC 60502 part 1, cl. 17
688 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 1 kV up to 3 kV Water Absorption (Gravimetric) IEC 60502 part 1, cl.18
689 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 1 kV up to 3 kV Water Immersion Test IEC 60502 part 1 cl.18
690 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 1 kV up to 3 kV Water Immersion Test IEC 60502 part 1 cl.18
691 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 6 kV up to 3 kV Cables for rated voltagesabove 30 kV up to 150 kV
Capacitance Measurement IEC 60502 part 2, cl.18
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 47 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
692 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 6 kV up to 30 kV
Tan Delta Measurement atambient and elevatedtemperature
IEC 60502 part 2, cl.18
693 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesAbove 30 kV up to 150 kV Capacitance Measurement IEC 60840, cl.12
694 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesAbove 30 kV up to 150 kV
Conductor Resistance Test/Armour resistivity Test IEC 60840, cl. 12
695 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesAbove 30 kV up to 150 kV
Power Frequency WithstandTest/ Dielectric strength IEC 60840, cl.12
696 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesAbove 30 kV up to 150 kV
Tan Delta Measurement atambient &elevatedtemperature
IEC 60840, cl. 12
697 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesAbove 30 kV up to 150 kV Thickness and dimension test IEC 60840, Cl.12
698 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesAbove 30 kV up to 150 kV Cold Elongation test IEC 60840, Cl.19
699 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesAbove 30 kV up to 150 kV Dielectric Strength test IEC 60840, Cl.12
700 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesAbove 30 kV up to 150 kV Load cycle test IEC 60840, Cl.12
701 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesAbove 30 kV up to 150 kV Load Cycle test IEC 60840, Cl.12
702 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesAbove 30 kV up to 150 kV
Mechanical test Cold Impacttest IEC 60840, Cl.19
703 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesAbove 30 kV up to 150 kV Power frequency test IEC 60840, Cl.12
704 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesAbove 30 kV up to 150 kV Pre Qualification test IEC 60840, Cl.12
705 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesAbove 30 kV up to 150 kV Pre Qualification test IEC 60840, Cl.12
706 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesAbove 30 kV up to 150 kV Water penetration test IEC 60840, Cl.12
707 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesAbove 30 kV up to 150 kV Water Penetration test IEC 60840, Cl.12
708 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesCables for rated voltages 1 kV up to 3 kV Ageing in air bomb IEC 60502 part 1, cl. 1
709 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesCables for rated voltages 1 kV up to 3 kV Ageing in air oven IEC 60502 part 1, cl. 18
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 48 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
710 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesCables for rated voltages 1 kV up to 3 kV Bending test IEC 60502, part 1, cl.18
711 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesCables for rated voltages 1 kV up to 3 kV
Breaking Strength test(Elongation at Break test) IEC 60502 part 1 cl.18
712 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesCables for rated voltages 1 kV up to 3 kV Carbon Black content test IEC 60502 part 1, cl. 18
713 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesCables for rated voltages 1 kV up to 3 kV Drainage test IEC 60502 part 1, cl. 18
714 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesCables for rated voltages 1 kV up to 3 kV Dripping test IEC 60502 part 1, cl. 18
715 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesCables for rated voltages 1 kV up to 3 kV
Flame Retardant test(Flammability test) IEC 60502, part-1, cl.18
716 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesCables for rated voltages 1 kV up to 3 kV
Flame Retardant test on Bunchof Cables IEC 60502, Part-1, Cl.18
717 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesCables for rated voltages 1 kV up to 3 kV Heat Shock test IEC 60502 part 1, cl. 1
718 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesCables for rated voltages 1 kV up to 3 kV Hot deformation test IEC 60502 part 1, cl. 18
719 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesCables for rated voltages 1 kV up to 3 kV Hot set test IEC 60502 part 1, cl. 18
720 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesCables for rated voltages 1 kV up to 3 kV Impulse withstand test IEC 60502 part I-(Cl. 17)
721 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesCables for rated voltages 1 kV up to 3 kV Insulation Resistance test IEC 60502 part 1, cl. 17
722 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesCables for rated voltages 1 kV up to 3 kV IR Constant test IEC 60502 part 1, cl. 17
723 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesCables for rated voltages 1 kV up to 3 kV Loss of mass test IEC 60502 part 1, cl. 18
724 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesCables for rated voltages 1 kV up to 3 kV Mechanical test Tensile test IEC 60502 part 1, cl. 17
725 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesCables for rated voltages 1 kV up to 3 kV Mineral Oil Immersion test IEC 60502 part 1, cl. 18
726 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesCables for rated voltages 1 kV up to 3 kV
Pressure test at hightemperature IEC 60502 part 1, cl. 18
727 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesCables for rated voltages 1 kV up to 3 kV Shrinkage test IEC 60502 part 1, cl. 18
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 49 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
728 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesCables for rated voltages 1 kV up to 3 kV Tear Resistance test IEC 60502, part 1, Cl.17
729 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesCables for rated voltages 1 kV up to 3 kV
Test for resistance to crackingtest IEC 60502 part 1, cl. 18
730 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesCables for rated voltages 1 kV up to 3 kV Torsion test IEC 60502 part-1, cl.18
731 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesCables for rated voltages 1 kV up to 3 kV Volume Resistivity test IEC 60502 part 1, cl. 17
732 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesCables for rated voltages 1 kV up to 3 kV Winding test IEC 60502 part-1, cl.18
733 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesCables for rated voltages 1 kV up to 3 kV Wrapping test IEC 60502, Part-1, Cl.18
734 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 1 kV up to 3 kV Dimension of Armour Material IEC 60502 part 1, cl. 18
735 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 6 kV up to 30 kV Ageing in air oven IEC 60502, Part-2, Cl.18
736 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 6 kV up to 30 kV Bending test IEC 60502, Part-2, Cl.18
737 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 6 kV up to 30 kV Carbon Black content test IEC 60502, part-2, cl.18
738 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 6 kV up to 30 kV Cold bend test IEC 60502, part-2, Cl.17
739 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 6 kV up to 30 kV Cold Elongation test IEC 60502, Part-2, Cl.17
740 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 6 kV up to 30 kV Conditioning test IEC 60502, Part-2, Cl.17
741 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 6 kV up to 30 kV Dimension of Armour Material IEC 60502 part 2, cl.18
742 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 6 kV up to 30 kV Drainage test IEC 60502, part-2, cl.18
743 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 6 kV up to 30 kV Dripping test IEC 60502, Part-2, Cl.18
744 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 6 kV up to 30 kV Electrical heat cycle test IEC 60502 part 2, cl. 18
745 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 6 kV up to 30 kV
Flame Retardant test(Flammability test) IEC 60502, Part-2, Cl.18
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 50 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
746 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 6 kV up to 30 kV
Flame Retardant test on Bunchof Cables IEC 60502, Part-2, Cl.18
747 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 6 kV up to 30 kV Heat Shock test IEC 60502, Part-2, Cl.18
748 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 6 kV up to 30 kV Hot deformation test IEC 60502, part-2, cl.18
749 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 6 kV up to 30 kV Hot set test IEC 60502, part-2, Cl.18
750 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 6 kV up to 30 kV IR Constant test IEC 60502, part-2, Cl.17
751 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 6 kV up to 30 kV Load cycle test IEC 60502 part 2, cl. 18
752 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 6 kV up to 30 kV Loss of mass test IEC 60502, part-2, Cl.18
753 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 6 kV up to 30 kV
Mechanical test Cold impacttest IEC 60502, Part-2, Cl.17
754 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 6 kV up to 30 kV Mineral Oil immersion test IEC 60502, part-2, Cl.18
755 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 6 kV up to 30 kV Partial discharge Test IEC 60502 (part 2), cl. 18
756 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 6 kV up to 30 kV
Power Frequency WithstandTest/ Dielectric strength IEC 60502 part 2, cl. 18
757 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 6 kV up to 30 kV
Power Frequency WithstandTest/ Dielectric strength IEC 60502 part 2, cl. 18
758 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 6 kV up to 30 kV Pre Qualification test IEC 60502 part 2, cl. 18
759 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 6 kV up to 30 kV
Pressure test at hightemperature IEC 60502, part-2, Cl.18
760 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 6 kV up to 30 kV Shrinkage test IEC 60502, part-2, Cl.18
761 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 6 kV up to 30 kV Test for Resistance to cracking IEC 60502, Part-2, Cl.18
762 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 6 kV up to 30 kV Thickness and dimension test IEC 60502 part 2 cl.18
763 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 6 kV up to 30 kV Torsion test IEC 60502, Part-2, Cl.18
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 51 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
764 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 6 kV up to 30 kV Volume Resistivity test IEC 60502, Part-2, Cl.17
765 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 6 kV up to 30 kV Water Absorption (Gravimetric) IEC 60502 part 2, cl.18
766 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 6 kV up to 30 kV Water penetration test IEC 60502 part 2, cl. 18
767 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 6 kV up to 30 kV Winding test IEC 60502, Part-2, Cl.18
768 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages 6 kV up to 30 kV Wrapping test IEC 60502, Part-2, Cl.18
769 ELECTRICAL- CABLES &WIRES
Power Cables with Extruded insulation and theiraccessories for rated voltages above 150 kV up to 500 kV Capacitance measurement IEC 62067, Cl.12
770 ELECTRICAL- CABLES &WIRES
Power Cables with Extruded insulation and theiraccessories for rated voltages above 150 kV up to 500 kV Conductor Resistance test IEC 60227 cl.12
771 ELECTRICAL- CABLES &WIRES
Power Cables with Extruded insulation and theiraccessories for rated voltages above 150 kV up to 500 kV
Impulse withstand Test/ PreQualification Test IEC 62067 (Cl.12 &13)
772 ELECTRICAL- CABLES &WIRES
Power Cables with Extruded insulation and theiraccessories for rated voltages above 150 kV up to 500 kV Load Cycle test IEC 62067, Cl.12
773 ELECTRICAL- CABLES &WIRES
Power Cables with Extruded insulation and theiraccessories for rated voltages above 150 kV up to 500 kV Load Cycle test IEC 62067, Cl.12
774 ELECTRICAL- CABLES &WIRES
Power Cables with Extruded insulation and theiraccessories for rated voltages above 150 kV up to 500 kV Pre Qualification test IEC 62067, Cl.12
775 ELECTRICAL- CABLES &WIRES
Power Cables with Extruded insulation and theiraccessories for rated voltages above 150 kV up to 500 kV Pre qualification test IEC 62067, Cl.12
776 ELECTRICAL- CABLES &WIRES
Power Cables with Extruded insulation and theiraccessories for rated voltages above 150 kV up to 500 kV
Tan delta at ambient andelevated temperature IEC 62067, Cl.12
777 ELECTRICAL- CABLES &WIRES
Power Cables with Extruded insulation and theiraccessories for rated voltages above 150 kV up to 500 kV Water penetration test IEC 62067, Cl.12
778 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and their accessoriesfor rated voltages Above 30 kV up to 150 kV Partial Discharge test IEC 60840, Cl.12
779 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and theiraccessories- Cables for rated voltages 1 kV up to 3 kV Armour Resistivity test IEC 60502, Part-1, Cl.16 & 17
780 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and theiraccessories- Cables for rated voltages 1 kV up to 3 kV Armour Resistivity test IEC 60502, part-2, Cl.17
781 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and theiraccessories- Cables for rated voltages 1 kV up to 3 kV Conductor resistance test IEC 60502, Part-1, Cl.16 & 17
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 52 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
782 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and theiraccessories- Cables for rated voltages 1 kV up to 3 kV Conductor Resistance test IEC 60502, Part-2, Cl.17
783 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and theiraccessories-Cables for rated voltages 1 kV up to 3 kV Cold Bend test IEC 60502, Part-1, Cl.18
784 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and theiraccessories-Cables for rated voltages 1 kV up to 3 kV Cold Elongation test IEC 60502, Part-1, Cl.18
785 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and theiraccessories-Cables for rated voltages 1 kV up to 3 kV Conditioning test IEC 60502, part-1, Cl.18
786 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and theiraccessories-Cables for rated voltages 1 kV up to 3 kV
Mechanical test Cold impacttest IEC 60502, Part-1, Cl.18
787 ELECTRICAL- CABLES &WIRES
Power cables with extruded insulation and theiraccessories-Cables for rated voltages 1 kV up to 3 kV
Thermal Stability Test for PVCmaterial IEC 60502 part 1 cl.18
788 ELECTRICAL- CABLES &WIRES
power cables with rated voltages from 3.6/6 kV up to andincluding 20.8/36 kV Dielectric Strength test VDE-0278-442
789 ELECTRICAL- CABLES &WIRES
power cables with rated voltages from 3.6/6 kV up to andincluding 20.8/36 kV Power frequency withstand test VDE -0278-442:
790 ELECTRICAL- CABLES &WIRES
power cables with rated voltages from 3.6/6 kV up to andincluding 20.8/36kV Mechanical Test: Impact Test DIN EN 61442
791 ELECTRICAL- CABLES &WIRES PVC Cables Upto and including 1.1kV Flame Retardant test
(Flammability test) IS 694 cl.15
792 ELECTRICAL- CABLES &WIRES
PVC insulated Cables for Electric Supply for workingvoltages up to and including 1100 Volts
Galvanising test (Uniformity ofZinc coating & Mass of Zinccoating)
IS 1554 part 1, cl.15
793 ELECTRICAL- CABLES &WIRES
PVC insulated Cables for working voltages up to andincluding 1100 Volts Thickness and dimension test IS 694, cl.15
794 ELECTRICAL- CABLES &WIRES
PVC insulated Cables for working voltages up to andincluding 1100 Volts
Water Immersion Test/Absence of faults in theinsulation
IS 694 cl.15
795 ELECTRICAL- CABLES &WIRES
PVC insulated Cables for working voltages up to andincluding 1100Volts
Thermal Stability Test for PVCmaterial IS 694 cl.11
796 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables from 3.3 kV upto and including 11 kV Capacitance Measurement IS 1554 part 2, cl.18
797 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables from 3.3 kV upto and including 11 kV
Tan Delta Measurement atambient and elevatedtemperature
IS 1554 part 2, cl. 18
798 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages from 3.3 kV up to and including 11 kV
Impulse withstand Test/ PreQualification Test IS 1554 part 2
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 53 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
799 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages from 3.3 kV up to and including 11 kV
Thermal Stability Test for PVCmaterial IS 1554 part 2 cl.18
800 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages from 3.3 kV up to and including 11 kV
Galvanising test (Uniformity ofZinc coating & Mass of Zinccoating)
IS 1554 part2 cl.18
801 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages from 3.3 kV up to and including 11 kV Ageing in air bomb IS 1554 part 2, cl.18
802 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages from 3.3 kV up to and including 11 kV Ageing in air oven IS 1554 part 2, cl.18
803 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages from 3.3 kV up to and including 11 kV Armour Resistivity test IS 1554 part 2, cl.18
804 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages from 3.3 kV up to and including 11 kV
Breaking strength test(Elongation at break test) IS 1554 part 2, cl.18
805 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages from 3.3 kV up to and including 11 kV Carbon Black content test IS 1554 part 2, cl.18
806 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages from 3.3 kV up to and including 11 kV Cold Bend test IS 1554 part 2, cl.18
807 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages from 3.3 kV up to and including 11 kV Cold Elongation test IS 1554 part 2, cl.18
808 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages from 3.3 kV up to and including 11 kV Conductor Resistance test IS 1554 part 2, cl.18
809 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages from 3.3 kV up to and including 11 kV Dimension of Armour Material IS 1554 part 2, cl. 18
810 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages from 3.3 kV up to and including 11 kV Electrical Heat Cycle test IS 1554 part 2, cl.18
811 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages from 3.3 kV up to and including 11 kV
Flame Retardance test(Sweedish Chimney test) IS 1554 part 2, cl.18
812 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages from 3.3 kV up to and including 11 kV
Flame retardance test onbunch of cables IS 1554 part 2, cl.18
813 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages from 3.3 kV up to and including 11 kV
Flame Retardant test(Flammability test) IS 1554 part 2, cl.18
814 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages from 3.3 kV up to and including 11 kV Heat Shock test IS 1554 part 2, cl.18
815 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages from 3.3 kV up to and including 11 kV Hot deformation test IS 1554 part 2, cl.18
816 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages from 3.3 kV up to and including 11 kV Hot set test IS 1554 part 2, cl.18
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 54 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
817 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages from 3.3 kV up to and including 11 kV Insulation Resistance test IS 1554 part 2, cl.18
818 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages from 3.3 kV up to and including 11 kV IR Constant test IS 1554 part 2, cl.18
819 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages from 3.3 kV up to and including 11 kV Load cycle test IS 1554 part 2, cl.18
820 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages from 3.3 kV up to and including 11 kV Loss of mass test IS 1554 part 2, cl.18
821 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages from 3.3 kV up to and including 11 kV
Mechanical test Cold Impacttest IS 1554 part 2, cl.18
822 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages from 3.3 kV up to and including 11 kV Mechanical test Tensile test IS 1554 part 2, cl.18
823 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages from 3.3 kV up to and including 11 kV
Power Frequency WithstandTest/ Dielectric strength IS 1554 part 2, cl.18
824 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages from 3.3 kV up to and including 11 kV
Power Frequency WithstandTest/ Dielectric strength IS 1554 part 2, cl.18
825 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages from 3.3 kV up to and including 11 kV Shrinkage test IS 1554 part 2, cl.18
826 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages from 3.3 kV up to and including 11 kV Thickness and dimension test IS 1554 part 2, cl. 18
827 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages from 3.3 kV up to and including 11 kV Volume Resistivity test IS 1554 part 2, cl.18
828 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages from 3.3 kV up to and including 11 kV Water Absorption (Gravimetric) IS 1554 part 2, cl.18
829 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages from 3.3kV up to and including 11 kV Partial discharge Test IS 1554 part 2
830 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages up to and including 1100 Volts
Thermal Stability Test for PVCmaterial IS 1554 part 1, cl. 15
831 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages up to and including 1100 Volts From 3.3 kV up toand including 11kV
Insulation Resistance Test/Volume resistivity/ IR Constant IS 694 cl.15
832 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages up to and including 1100 Volts From 3.3 kV up toand including 11 kV
Partial discharge Test IEC 60885-2
833 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages up to and including 1100 Volts Armour Resistivity tets IS 1554 part 1, cl.15
834 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages up to and including 1100 Volts Conductor Resistance test IS 1554 part 1, cl.15
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 55 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
835 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages up to and including 1100 Volts DC withstand Test IS 1554 part1, cl.15:
836 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages up to and including 1100 Volts Dimension of Armour Material IS 10810 pt.36
837 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages up to and including 1100 Volts Dimension of armour material IS 1554 Part I-Am I,Am II, Am
III(Cl.15)
838 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages up to and including 1100 Volts
Power Frequency WithstandTest/ Dielectric strength IS 1554 part1, cl.15
839 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages up to and including 1100 Volts
Power Frequency WithstandTest/ Dielectric strength IS 1554 part1, cl.15
840 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages up to and including 1100 Volts Thickness and dimension test IS 1554 part 1, cl.15
841 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages up to and including 1100 Volts Water Immersion test IS 1554 part 1, cl.15
842 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages up to and including 1100 Volts
Water Immersion Test/Absence of faults in theinsulation
IS 1554 part 1 cl.15
843 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages up to and including 1100Volts
Breaking Strength test(Elongation at break test) IS 1554 part 1, cl.15
844 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages up to and including 1100Volts Insulation Resistance test IS 1554 part 1, cl.15
845 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages up to and including 1100Volts IR Constant test IS 1554 part 1, cl.15
846 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages up to and including 1100Volts
Mechanical test Tensilestrength test IS 1554 part 1, cl.15
847 ELECTRICAL- CABLES &WIRES
PVC insulated (Heavy Duty) Electric Cables for workingvoltages up to and including 1100Volts Volume Resistivity test IS 1554 part 1, cl.15
848 ELECTRICAL- CABLES &WIRES
PVC insulated Cables for working voltages up to andincluding 1100 volts DC withstand Test IS 694, cl.15
849 ELECTRICAL- CABLES &WIRES
PVC insulated Cables for working voltages up to andincluding 1100 volts Armour Resistivity test IS 694 cl.15
850 ELECTRICAL- CABLES &WIRES
PVC insulated Cables for working voltages up to andincluding 1100 volts Conductor Resistance test IS 694 cl.15
851 ELECTRICAL- CABLES &WIRES
PVC insulated Cables for working voltages up to andincluding 1100 volts
Power Frequency WithstandTest/ Dielectric strength IS 694, cl. 15
852 ELECTRICAL- CABLES &WIRES
PVC insulated Cables for working voltages up to andincluding 1100 volts
Power Frequency WithstandTest/ Dielectric strength IS 694, cl. 15
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 56 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
853 ELECTRICAL- CABLES &WIRES
PVC insulated Cables for working voltages up to andincluding 1100 Volts
Water Immersion Test/Absence of faults in theinsulation
IS 694, Cl.15
854 ELECTRICAL- CABLES &WIRES
PVC insulated Cables for working voltages up to andincluding 1100Volts Annealing test IS 694 cl.15
855 ELECTRICAL- CABLES &WIRES
PVC insulated Cables for working voltages up to andincluding 1100Volts
Breaking strength test(Elongation at break test) IS 694 cl.15
856 ELECTRICAL- CABLES &WIRES
PVC insulated Cables for working voltages up to andincluding 1100Volts Cold Bend test IS 1554 part 1, cl.15
857 ELECTRICAL- CABLES &WIRES
PVC insulated Cables for working voltages up to andincluding 1100Volts Cold Bend test IS 694 cl.15
858 ELECTRICAL- CABLES &WIRES
PVC insulated Cables for working voltages up to andincluding 1100Volts Cold Elongation test IS 1554 part 1, cl.15
859 ELECTRICAL- CABLES &WIRES
PVC insulated Cables for working voltages up to andincluding 1100Volts Cold Elongation test IS 694 cl.15
860 ELECTRICAL- CABLES &WIRES
PVC insulated Cables for working voltages up to andincluding 1100Volts
Mechanical test Cold impacttest IS 1554 part 1, cl.15
861 ELECTRICAL- CABLES &WIRES
PVC insulated Cables for working voltages up to andincluding 1100Volts
Mechanical test Cold impacttest IS 694 cl.15
862 ELECTRICAL- CABLES &WIRES
PVC insulated Cables for working voltages up to andincluding 1100Volts
Mechanical test Tensilestrength test IS 694 cl.15
863 ELECTRICAL- CABLES &WIRES
PVC insulated Cables of rated voltages up to and including450/750 Volts Cold bend test IEC 60227, Part 1 to 6, cl.12
864 ELECTRICAL- CABLES &WIRES
PVC insulated Cables of rated voltages up to and including450/750 Volts Cold Elongation test IEC 60227, Part 1 to 6, cl.12
865 ELECTRICAL- CABLES &WIRES
PVC insulated Cables of rated voltages up to and including450/750 Volts
Mechanical test Cold Impacttest IEC 60227, Part 1 to 6, cl.12
866 ELECTRICAL- CABLES &WIRES
PVC Insulated Cables of rated Voltages up to and including450/750 Volts Thickness and dimension test IEC 60227 part 1 to 6, cl.12
867 ELECTRICAL- CABLES &WIRES PVC insulated Cables upto and including 1100 Volts Ageing in air oven IS 694 cl.15
868 ELECTRICAL- CABLES &WIRES PVC insulated Cables upto and including 1100 Volts Carbon Black content test IS 694 cl.15
869 ELECTRICAL- CABLES &WIRES PVC insulated Cables upto and including 1100 Volts Heat shock test IS 694 cl.15
870 ELECTRICAL- CABLES &WIRES PVC insulated Cables upto and including 1100 Volts Hot Deformation test IS 694 cl.15
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 57 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
871 ELECTRICAL- CABLES &WIRES PVC insulated Cables upto and including 1100 Volts Loss of mass test IS 694 cl.15
872 ELECTRICAL- CABLES &WIRES PVC insulated Cables upto and including 1100 Volts Shrinkage test IS 694 cl.15
873 ELECTRICAL- CABLES &WIRES
PVC insulated Heavy Duty Electric Cables for workingvoltages up to and including 1100 Volts
Flame retardance tets onbunched cables IS 1554 part 1, cl.15
874 ELECTRICAL- CABLES &WIRES
PVC insulated Heavy Duty Electric Cables for workingvoltages up to and including 1100 Volts Flame Retardant test IS 1554 part 1, cl.15
875 ELECTRICAL- CABLES &WIRES
PVC insulated Heavy Duty Electric Cables for workingvoltages up to and including 1100 Volts
Flame retardant test(Flammability test) IS 1554 part 1, cl.15
876 ELECTRICAL- CABLES &WIRES
PVC insulated(Heavy Duty) Electric cables for workingvoltages up to and including 1100 Volts Ageing in air oven IS 1554 part 1, cl.15
877 ELECTRICAL- CABLES &WIRES
PVC insulated(Heavy Duty) Electric cables for workingvoltages up to and including 1100 Volts Heat Shock test IS 1554 part 1, cl.15
878 ELECTRICAL- CABLES &WIRES
PVC insulated(Heavy Duty) Electric cables for workingvoltages up to and including 1100 Volts Hot Deformation test IS 1554 part 1, cl.15
879 ELECTRICAL- CABLES &WIRES
PVC insulated(Heavy Duty) Electric cables for workingvoltages up to and including 1100 Volts Hot set test IS 1554 part 1, cl.15
880 ELECTRICAL- CABLES &WIRES
PVC insulated(Heavy Duty) Electric cables for workingvoltages up to and including 1100 Volts Loss of mass test IS 1554 part 1, cl.15
881 ELECTRICAL- CABLES &WIRES
PVC insulated(Heavy Duty) Electric cables for workingvoltages up to and including 1100 Volts
Pressure test at hightemperature IS 1554 part 1, cl.15
882 ELECTRICAL- CABLES &WIRES
PVC insulated(Heavy Duty) Electric cables for workingvoltages up to and including 1100 Volts Shrinkage test IS 1554 part 1, cl.15
883 ELECTRICAL- CABLES &WIRES
PVC insulated(Heavy Duty) Electric cables for workingvoltages up to and including 1100 Volts Test for resistance to cracking IS 1554 part 1, cl.15
884 ELECTRICAL- CABLES &WIRES
Rubber Insulated Cables of rated voltage Up to andincluding 450/750 Volts Conductor Resistance test IEC 60245, Part 1 to 7
885 ELECTRICAL- CABLES &WIRES
Rubber Insulated Cables of rated voltage Up to andincluding 450/750 Volts
Power Frequency WithstandTest/ Dielectric strength IEC 60245, part 1 to 5
886 ELECTRICAL- CABLES &WIRES
Rubber Insulated Cables of rated voltage Up to andincluding 450/750 Volts
Power Frequency WithstandTest/ Dielectric strength IEC 60245, part 1 to 5
887 ELECTRICAL- CABLES &WIRES
Rubber Insulated Cables of rated voltage Up to andincluding 450/750 Volts Resistivity of Armour IEC 60245, Part 1 to 7
888 ELECTRICAL- CABLES &WIRES
Rubber Insulated Cables of rated voltages up to andincluding 450/750 Volts Annealing test IEC 60245, Part 1 to 7
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 58 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
889 ELECTRICAL- CABLES &WIRES
Rubber Insulated Cables of rated voltages up to andincluding 450/750 Volts
Breaking strength test(Elongation at break test) IEC 60245, Part 1 t o 7
890 ELECTRICAL- CABLES &WIRES
Rubber Insulated Cables of rated voltages up to andincluding 450/750 Volts Insulation Resistance test IEC 60245, Part 1 to 7
891 ELECTRICAL- CABLES &WIRES
Rubber Insulated Cables of rated voltages up to andincluding 450/750 Volts IR Constant test IS 60245, Part 1 to 7
892 ELECTRICAL- CABLES &WIRES
Rubber Insulated Cables of rated voltages up to andincluding 450/750 Volts
Mechanical test tensilestrength test IEC 60245, Part-1 to 7
893 ELECTRICAL- CABLES &WIRES
Rubber Insulated Cables of rated voltages up to andincluding 450/750 Volts Tear Resistance test IEC 60245, Part-1 to 7
894 ELECTRICAL- CABLES &WIRES
Rubber Insulated Cables of rated voltages Up to andincluding 450/750 Volts Thickness and dimension test IEC 60245 part 1 to 7
895 ELECTRICAL- CABLES &WIRES
Rubber Insulated Cables of rated voltages up to andincluding 450/750 Volts Volume Resistivity test IEC 60245, Part 1 to 7
896 ELECTRICAL- CABLES &WIRES
Rubber insulated Cables of rated voltages upto andincluding 450/ 750 Volts Ageing in air bomb IEC 60245, Part 1 to 7
897 ELECTRICAL- CABLES &WIRES
Rubber insulated Cables of rated voltages upto andincluding 450/ 750 Volts Ageing in air oven IEC 60245, Part 1 to 7
898 ELECTRICAL- CABLES &WIRES
Rubber insulated Cables of rated voltages upto andincluding 450/ 750 Volts Carbon Black content test IEC 60245, Part 1 to 7
899 ELECTRICAL- CABLES &WIRES
Rubber insulated Cables of rated voltages upto andincluding 450/ 750 Volts Cold Bend test IEC 60245, Part 1 to 7
900 ELECTRICAL- CABLES &WIRES
Rubber insulated Cables of rated voltages upto andincluding 450/ 750 Volts Cold Elongation test IEC 60245, part 1 to 7
901 ELECTRICAL- CABLES &WIRES
Rubber insulated Cables of rated voltages upto andincluding 450/ 750 Volts Conditioning test IEC 60245 Part 1 to 7
902 ELECTRICAL- CABLES &WIRES
Rubber insulated Cables of rated voltages upto andincluding 450/ 750 Volts Heat Shock test IEC 60245, Part 1 to 7
903 ELECTRICAL- CABLES &WIRES
Rubber insulated Cables of rated voltages upto andincluding 450/ 750 Volts Hot Deformation test IEC 60245, Part 1 to 7
904 ELECTRICAL- CABLES &WIRES
Rubber insulated Cables of rated voltages upto andincluding 450/ 750 Volts Hot set test IEC 60245, Part 1 to 7
905 ELECTRICAL- CABLES &WIRES
Rubber insulated Cables of rated voltages upto andincluding 450/ 750 Volts Loss of mass test IEC 60245, Part 1 to 7
906 ELECTRICAL- CABLES &WIRES
Rubber insulated Cables of rated voltages upto andincluding 450/ 750 Volts
Mechanical test Cold Impacttest IEC 60245, Part 1 to 7
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 59 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
907 ELECTRICAL- CABLES &WIRES
Rubber insulated Cables of rated voltages upto andincluding 450/ 750 Volts Mineral Oil Immersion test IEC 60245, Part 1 to 7
908 ELECTRICAL- CABLES &WIRES
Rubber insulated Cables of rated voltages upto andincluding 450/ 750 Volts
Pressure test at hightemperature IEC 60245, Part 1 to 7
909 ELECTRICAL- CABLES &WIRES
Rubber insulated Cables of rated voltages upto andincluding 450/ 750 Volts Shrinkage test IEC 60245, Part 1 to 7
910 ELECTRICAL- CABLES &WIRES
Rubber insulated Cables of rated voltages upto andincluding 450/ 750 Volts Test for Resistance to cracking IEC 60245, Part 1 to 7
911 ELECTRICAL- CABLES &WIRES
Ship Board Power Cables- General Construction and testrequirements Capacitance Measurement IEC 60092-350-Cl. No. 7.7
912 ELECTRICAL- CABLES &WIRES
Ship Board Power Cables- General Construction and testrequirements
Conductor Resistance Test/Armour resistivity Test IEC 60092-350
913 ELECTRICAL- CABLES &WIRES
Ship Board Power Cables- General Construction and testrequirements Impulse withstand test IEC 60092-350
914 ELECTRICAL- CABLES &WIRES
Ship Board Power Cables- General Construction and testrequirements Partial Discharge test IEC 60092-350- Cl.No. 7.7.3
915 ELECTRICAL- CABLES &WIRES
Ship Board Power Cables- General Construction and testrequirements
Power Frequency WithstandTest/ Dielectric strength IEC 60092-350- Cl. 7.7
916 ELECTRICAL- CABLES &WIRES
Ship Board Power Cables- General Construction and testrequirements
Power Frequency WithstandTest/ Dielectric strength IEC 60092-350- Cl. 7.7
917 ELECTRICAL- CABLES &WIRES
Ship Board Power Cables- General Construction and testrequirements Tan delta Measurement IEC 60092-350- Cl. No. 7.7
918 ELECTRICAL- CABLES &WIRES
Ship Board Power Cables- General Construction and testrequirements Ageing in air oven IEC 60092-350, Cl.8
919 ELECTRICAL- CABLES &WIRES
Ship Board Power Cables- General Construction and testrequirements
Breaking strength test(Elongation at break test) IEC 60092-350
920 ELECTRICAL- CABLES &WIRES
Ship Board Power Cables- General Construction and testrequirements Carbon Black content test IEC 60092-350, Cl.8
921 ELECTRICAL- CABLES &WIRES
Ship Board Power Cables- General Construction and testrequirements Electrical Heat cycle test IEC 60092-350, Cl.7
922 ELECTRICAL- CABLES &WIRES
Ship Board Power Cables- General Construction and testrequirements Heat Shock test IEC 60092-350, Cl.8
923 ELECTRICAL- CABLES &WIRES
Ship Board Power Cables- General Construction and testrequirements Hot deformation test IEC 60092-350, Cl.18
924 ELECTRICAL- CABLES &WIRES
Ship Board Power Cables- General Construction and testrequirements Hot set test IEC 60092-350, Cl.8
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 60 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
925 ELECTRICAL- CABLES &WIRES
Ship Board Power Cables- General Construction and testrequirements Load cycle test IEC 60092-350, Cl.7
926 ELECTRICAL- CABLES &WIRES
Ship Board Power Cables- General Construction and testrequirements Loss of mass test IEC 60092-350, Cl.8
927 ELECTRICAL- CABLES &WIRES
Ship Board Power Cables- General Construction and testrequirements
Mechanical test Tensilestrength test IEC 60092-350
928 ELECTRICAL- CABLES &WIRES
Ship Board Power Cables- General Construction and testrequirements
Pressure test at hightemperature IEC 60092-350, Cl.8
929 ELECTRICAL- CABLES &WIRES
Ship Board Power Cables- General Construction and testrequirements Shrinkage test IEC 60092-350, Cl.8
930 ELECTRICAL- CABLES &WIRES
Ship Board Power Cables- General Construction and testrequirements Tear Resistance test IEC 60092-350
931 ELECTRICAL- CABLES &WIRES
Ship Board Power Cables- General Construction and testrequirements Test for resistance to cracking IEC 60092-350, Cl.8
932 ELECTRICAL- CABLES &WIRES
Ship Board Power Cables- General Construction and testrequirements Water penetration test IEC 60092-350, Cl.7
933 ELECTRICAL- CABLES &WIRES
Single core PVC insulated flexible cables of rated voltage600/1000 V for switch gear and control gear wiring
Power Frequency WithstandTest/ Dielectric strength BS 6231, cl.11
934 ELECTRICAL- CABLES &WIRES
Single core PVC insulated flexible cables of rated voltage600/1000 V for switch gear and control gear wiring
Power Frequency WithstandTest/ Dielectric strength BS 6231, cl.11
935 ELECTRICAL- CABLES &WIRES
Single core PVC insulated flexible cables of rated voltage600/1000 V for switch gear and control gear wiring Armour Resistivity test BS 6231, Cl.11
936 ELECTRICAL- CABLES &WIRES
Single core PVC insulated flexible cables of rated voltage600/1000 V for switch gear and control gear wiring Conductor resistance test BS 6231, Cl.11
937 ELECTRICAL- CABLES &WIRES
Specification for Hot Dipped Galvanised coating on roundsteel wires
Galvanising test (Uniformity ofZinc coating & Mass of Zinccoating)
IS 4826
938 ELECTRICAL- CABLES &WIRES
Specification for Impregnated paper-insulated lead or leadalloy sheathed electric cables of rated voltages up to andincluding 33 000 V
Breaking Strength test BS 6480 cl.19
939 ELECTRICAL- CABLES &WIRES
Specification for Impregnated paper-insulated lead or leadalloy sheathed electric cables of rated voltages up to andincluding 33 000 V
Cold Bend test BS 6480 cl.19
940 ELECTRICAL- CABLES &WIRES
Specification for Impregnated paper-insulated lead or leadalloy sheathed electric cables of rated voltages up to andincluding 33 000 V
Cold Bend Test BS 6480 cl.19
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 61 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
941 ELECTRICAL- CABLES &WIRES
Specification for Impregnated paper-insulated lead or leadalloy sheathed electric cables of rated voltages up to andincluding 33 000 V
Cold Elongation test BS 6480 cl.19
942 ELECTRICAL- CABLES &WIRES
Specification for Impregnated paper-insulated lead or leadalloy sheathed electric cables of rated voltages up to andincluding 33 000 V
Cold Elongation test BS 6480 cl.19
943 ELECTRICAL- CABLES &WIRES
Specification for Impregnated paper-insulated lead or leadalloy sheathed electric cables of rated voltages up to andincluding 33 000 V
Conditioning test BS 6480 cl.19
944 ELECTRICAL- CABLES &WIRES
Specification for Impregnated paper-insulated lead or leadalloy sheathed electric cables of rated voltages up to andincluding 33 000 V
Conductor Resistance test BS 6480 cl.19
945 ELECTRICAL- CABLES &WIRES
Specification for Impregnated paper-insulated lead or leadalloy sheathed electric cables of rated voltages up to andincluding 33 000 V
Dimension of Armour Material BS 6480, AmI, Am II (Cl.19)
946 ELECTRICAL- CABLES &WIRES
Specification for Impregnated paper-insulated lead or leadalloy sheathed electric cables of rated voltages up to andincluding 33 000 V
Drainage test BS 6480 cl.19
947 ELECTRICAL- CABLES &WIRES
Specification for Impregnated paper-insulated lead or leadalloy sheathed electric cables of rated voltages up to andincluding 33 000 V
Dripping test BS 6480 cl.19
948 ELECTRICAL- CABLES &WIRES
Specification for Impregnated paper-insulated lead or leadalloy sheathed electric cables of rated voltages up to andincluding 33 000 V
Elongation at break BS 6480 cl.19
949 ELECTRICAL- CABLES &WIRES
Specification for Impregnated paper-insulated lead or leadalloy sheathed electric cables of rated voltages up to andincluding 33 000 V
Flame Retardant test(Flammability test) BS 6480 cl.19
950 ELECTRICAL- CABLES &WIRES
Specification for Impregnated paper-insulated lead or leadalloy sheathed electric cables of rated voltages up to andincluding 33 000 V
Galvanising test (Uniformity ofZinc coating & Mass of Zinccoating)
BS 6480 cl.19
951 ELECTRICAL- CABLES &WIRES
Specification for Impregnated paper-insulated lead or leadalloy sheathed electric cables of rated voltages up to andincluding 33 000 V
Heat Shock test BS 6480 cl.19
952 ELECTRICAL- CABLES &WIRES
Specification for Impregnated paper-insulated lead or leadalloy sheathed electric cables of rated voltages up to andincluding 33 000 V
Hot Deformation test BS 6480 cl.19
953 ELECTRICAL- CABLES &WIRES
Specification for Impregnated paper-insulated lead or leadalloy sheathed electric cables of rated voltages up to andincluding 33 000 V
Loss of Mass test BS 6480, cl.19
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 62 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
954 ELECTRICAL- CABLES &WIRES
Specification for Impregnated paper-insulated lead or leadalloy sheathed electric cables of rated voltages up to andincluding 33 000 V
Mechanical test Cold Impacttest BS 6480 cl.19
955 ELECTRICAL- CABLES &WIRES
Specification for Impregnated paper-insulated lead or leadalloy sheathed electric cables of rated voltages up to andincluding 33 000 V
Mechanical test Cold impacttest BS 6480 cl.19
956 ELECTRICAL- CABLES &WIRES
Specification for Impregnated paper-insulated lead or leadalloy sheathed electric cables of rated voltages up to andincluding 33 000 V
Mechanical Test -Tensile Test BS 6480, Amd I, Amd II (Cl.19)
957 ELECTRICAL- CABLES &WIRES
Specification for Impregnated paper-insulated lead or leadalloy sheathed electric cables of rated voltages up to andincluding 33 000 V
Pressure test at highTemperature BS 6480 cl.19
958 ELECTRICAL- CABLES &WIRES
Specification for Impregnated paper-insulated lead or leadalloy sheathed electric cables of rated voltages up to andincluding 33 000 V
Tan Delta Measurement atambient &elevatedtemperature
BS 6480, cl. 19
959 ELECTRICAL- CABLES &WIRES
Specification for Impregnated paper-insulated lead or leadalloy sheathed electric cables of rated voltages up to andincluding 33 000 V
Tear Resistance test BS 6480 cl.19
960 ELECTRICAL- CABLES &WIRES
Specification for Impregnated paper-insulated lead or leadalloy sheathed electric cables of rated voltages up to andincluding 33 000 V
Test for Resistance to cracking BS 6480 cl.19
961 ELECTRICAL- CABLES &WIRES
Specification for Impregnated paper-insulated lead or leadalloy sheathed electric cables of rated voltages up to andincluding 33 000 V
Thickness and dimension test BS 6480-am1,am2(Cl.19)
962 ELECTRICAL- CABLES &WIRES
Specification for Impregnated paper-insulated lead or leadalloy sheathed electric cables of rated voltages up to andincluding 33000 V
Capacitance Measurement BS 6480, Cl.19
963 ELECTRICAL- CABLES &WIRES
Specification for Impregnated paper-insulated lead or leadalloy sheathed electric cables of rated voltages up to andincluding 33000 V
Dielectric Test BS 6480 cl.19
964 ELECTRICAL- CABLES &WIRES
Specification for Impregnated paper-insulated lead or leadalloy sheathed electric cables of rated voltages up to andincluding 33000 V
Dielectric test BS 6480 cl.19
965 ELECTRICAL- CABLES &WIRES
Specification for Impregnated paper-insulated lead or leadalloy sheathed electric cables of rated voltages up to andincluding 33000 V
Insulation Resistance Test/Volume resistivity/ IR Constant BS 6480, Cl.19
966 ELECTRICAL- CABLES &WIRES
Specification for Impregnated paper-insulated lead or leadalloy sheathed electric cables of rated voltages up to andincluding 33000 V
Power frequency Withstandtest BS 6480 cl.19
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 63 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
967 ELECTRICAL- CABLES &WIRES
Specification for Impregnated paper-insulated lead or leadalloy sheathed electric cables of rated voltages up to andincluding 33000 V
Power frequency withstand test BS 6480 cl.19
968 ELECTRICAL- CABLES &WIRES
Specification for surge arrestors for alternating CurrentSystems
Galvanising test (Uniformity ofZinc coating & Mass of Zinccoating)
IS 3070 part 1
969 ELECTRICAL- CABLES &WIRES
Standard Test Method for Rate of burning and /or extent ofburning of self supporting Plastics in a horizontal position Fire resistance/ Flammability ASTM-D-635
970 ELECTRICAL- CABLES &WIRES
Surge Arrestors-Metal Oxide Surge Arrestors with out gapsfor ac systems Partial discharge Test IEC 60099-4, cl.6.4
971 ELECTRICAL- CABLES &WIRES
Surge Arrestors-Metal Oxide Surge Arrestors with out gapsfor ac systems Partial discharge Test IS 3070-part 3
972 ELECTRICAL- CABLES &WIRES
Test Common test methods for insulating and sheathingmaterial of electric cables
Pressure test at hightemperature
IS 10810 pt.10,11,12,14,15,16& 30 1984,IEC60811-404,409,412,502,503,508,509 &507
973 ELECTRICAL- CABLES &WIRES
Test Common test methods for insulating and sheathingmaterial of electric cables Test for resistance for cracking
IS 10810 pt.10,11,12,14,15,16& 30 1984,IEC60811-404,409,412,502,503,508,509 &507
974 ELECTRICAL- CABLES &WIRES
Test Method for determination of the amount of halogenacid evolved during combustion of polymeric materialstaken from cables
Halogen Acid test IEC 60754-1
975 ELECTRICAL- CABLES &WIRES
Test Method for determination of the amount of halogenacid evolved during combustion of polymeric materialstaken from cables
Halogen Acid Test IEC 60754-2
976 ELECTRICAL- CABLES &WIRES
Test method for Hot Deformation test - Common testmethods for insulating and sheathing material of electriccables
Hot Deformation test
IS 10810 pt.10,11,12,14,15,16& 30 1984,IEC60811-404,409,412,502,503,508,509 &507
977 ELECTRICAL- CABLES &WIRES Test method for Insulation Resistance Test Insulation Resistance test IS 10810 pt.43
978 ELECTRICAL- CABLES &WIRES Test method for Insulation Resistance Test IR Constant test IS 10810 pt.43
979 ELECTRICAL- CABLES &WIRES Test method for Insulation Resistance Test Volume Resistivity tset IS 10810 (Part-43)
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 64 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
980 ELECTRICAL- CABLES &WIRES
Test methods for accessories for power cables with ratedvoltages from 3.6/6 kV up to and including 20.8/36 kV Impulse withstand Test/ VDE -0278-442
981 ELECTRICAL- CABLES &WIRES
Test methods for accessories for power cables with ratedvoltages from 3.6/6 kV up to and including 20.8/36 kV DC withstand Test VDE -0278-442
982 ELECTRICAL- CABLES &WIRES
Test methods for accessories for power cables with ratedvoltages from 3.6/6 kV up to and including 20.8/36 kV Partial discharge Test DIN EN 61442
983 ELECTRICAL- CABLES &WIRES
Test methods for accessories for power cables with ratedvoltages from 3.6/6 kV up to and including 20.8/36 kV Partial discharge Test VDE -0278-442
984 ELECTRICAL- CABLES &WIRES
Test methods for Ageing test - Common test methods forinsulating and sheathing material of electric cables Ageing in air oven
IS 10810 pt.10,11,12,14,15,16& 30 1984,IEC60811-404,409,412,502,503,508,509 &507
985 ELECTRICAL- CABLES &WIRES Test Methods for Cold Impact/Cold Bend Test Cold Bend test IS 10810 pt.20, 21
986 ELECTRICAL- CABLES &WIRES Test Methods for Cold Impact/Cold Bend Test Cold Elongation test IS 10810 pt.20, 21
987 ELECTRICAL- CABLES &WIRES Test Methods for Cold Impact/Cold Bend Test Mechanical test Cold Impact
test IS 10810 Pt. 20, 21
988 ELECTRICAL- CABLES &WIRES
Test methods for Conductor Resistance Test / Resistivitytest for armour wires and strip Armour Resisitivity test IS 10810 pt. 5, 42
989 ELECTRICAL- CABLES &WIRES
Test methods for Conductor Resistance Test / Resistivitytest for armour wires and strip Conductor Resistance test IS 10810 pt. 5, 42
990 ELECTRICAL- CABLES &WIRES
Test methods for Dielectric Power factor measurement as afunction of voltage and temperature Capacitance Measurement IS 10810 pt. 48
991 ELECTRICAL- CABLES &WIRES
Test methods for Dielectric Power factor measurement as afunction of voltage and temperature
Tan Delta Measurement atambient &elevatedtemperature
IS 10810 pt. 48
992 ELECTRICAL- CABLES &WIRES Test methods for Dimensions of armouring material Dimension of Armour Material IS 10810 pt 36
993 ELECTRICAL- CABLES &WIRES Test methods for Flammability Test Flammability test on Bunch of
Cables Test IS 10810 Part 62
994 ELECTRICAL- CABLES &WIRES Test methods for Flammability Test Flame Retardant test
(Flammability test) IS 10810 pt.53
995 ELECTRICAL- CABLES &WIRES Test methods for Flammability Test Swedish Chimney Flammability
Test IS 10810-Part 61
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 65 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
996 ELECTRICAL- CABLES &WIRES
Test methods for heat shock Test Common test methodsfor insulating and sheathing material of electric cables Heat Shock test
IS 10810 pt.10,11,12,14,15,16& 30 1984,IEC60811-404,409,412,502,503,508,509 &507
997 ELECTRICAL- CABLES &WIRES Test methods for Heating cycle test Electrical heat cycle test IS 10810 Pt. 49
998 ELECTRICAL- CABLES &WIRES Test methods for Heating cycle test Load cycle test IS 10810 Pt. 49
999 ELECTRICAL- CABLES &WIRES Test methods for High Voltage Test Power Frequency Withstand
Test/ Dielectric strength IS 10810 pt.45
1000 ELECTRICAL- CABLES &WIRES Test methods for High Voltage Test Power Frequency Withstand
Test/ Dielectric strength IS 10810 pt.45
1001 ELECTRICAL- CABLES &WIRES
Test methods for loss of mass Test Common test methodsfor insulating and sheathing material of electric cables Loss of mass test
IS 10810 pt.10,11,12,14,15,16& 30 1984,IEC60811-404,409,412,502,503,508,509 &507
1002 ELECTRICAL- CABLES &WIRES Test methods for Partial Discharge Test Partial discharge Test IS 10810 part 45-84
1003 ELECTRICAL- CABLES &WIRES
Test methods for shrinkage test Common test methods forinsulating and sheathing material of electric cables Shrinkage test
IS 10810 pt.10,11,12,14,15,16& 30 1984,IEC60811-404,409,412,502,503,508,509 &507
1004 ELECTRICAL- CABLES &WIRES
Test methods for Tensile test/Tear resistance Test/ Tensilestrength of elastomeric Insulation and sheath/BreakingStrength Test for paper insulation
Breaking Strength test(Elongation at break test)
IS 10810 part10,11,12,14,15,16 & 30
1005 ELECTRICAL- CABLES &WIRES
Test methods for Tensile test/Tear resistance Test/ Tensilestrength of elastomeric Insulation and sheath/BreakingStrength Test for paper insulation
Mechanical test TensileStrength test
IS 10810 part10,11,12,14,15,16 & 30
1006 ELECTRICAL- CABLES &WIRES
Test methods for Tensile test/Tear resistance Test/ Tensilestrength of elastomeric Insulation and sheath/BreakingStrength Test for paper insulation
Tear Resistance test IS 10810 part10,11,12,14,15,16 & 30
1007 ELECTRICAL- CABLES &WIRES Test methods for Thermal Stability Test Thermal Stability Test for PVC
material IS 10810 pt.60
1008 ELECTRICAL- CABLES &WIRES Test Methods for Water absorption Test (Electrical) Water absorption Test
(Electrical) IS 10810, Part-28
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 66 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1009 ELECTRICAL- CABLES &WIRES Test Methods of dimension Thickness and dimension test
IS 10810 pt-1984, IS 10810pt.34-1984, IEC 60811-201,202, 203
1010 ELECTRICAL- CABLES &WIRES
Test porcedures and requirements for HV AC Cableterminations
Impulse withstand Test/ PreQualification Test IEEE Std-48 cl.8
1011 ELECTRICAL- CABLES &WIRES
Test procedures and requirements for AC Cableterminations 2.5 kV to 765 kV Partial discharge Test IEEE Std-48 (cl. 8)
1012 ELECTRICAL- CABLES &WIRES
Test procedures and requirements for AC Cableterminations 2.5 kV to 765 kV
Power Frequency WithstandTest/ Dielectric strength IEEE Std-48, cl.8
1013 ELECTRICAL- CABLES &WIRES
Test procedures and requirements for AC Cableterminations 2.5 kV to 765 kV
Power Frequency WithstandTest/ Dielectric strength IEEE Std-48, cl.8
1014 ELECTRICAL- CABLES &WIRES
Test procedures and requirements for AC Cableterminations 2.5 kV to 765 kV Electrical Heat cycle test IEEE Std. 48, Cl.8
1015 ELECTRICAL- CABLES &WIRES
Test procedures and requirements for AC Cableterminations 2.5 kV to 765 kV Electrical Heat cycle test IEEE Std. 48, Cl.8
1016 ELECTRICAL- CABLES &WIRES
Test procedures and requirements for AC Cableterminations 2.5 kV to 765 kV Load cycle test IEEE Std. 48, Cl.8
1017 ELECTRICAL- CABLES &WIRES
Test procedures and requirements for AC Cableterminations 2.5 kV to 765 kV Load cycle test IEEE Std.48, Cl.8
1018 ELECTRICAL- CABLES &WIRES
Test procedures and requirements for AC Cableterminations 2.5 kV to 765 kV Water Penetration test IEEE Std. 48, Cl.8
1019 ELECTRICAL- CABLES &WIRES
Test procedures and requirements for AC Cableterminations 2.5 kV to 765 kV Water Penetration test IEEE Std. 48, Cl.8
1020 ELECTRICAL- CABLES &WIRES
Test Requirements on Accessories for use on power cablesof rated voltage from 3.6/6(7.2) kV up to 20.8/36(42) kV Partial discharge Test DIN VDE 0278-629-1
1021 ELECTRICAL- CABLES &WIRES
Test Requirements on accessories For cables with ratedvoltage from 6 kV up to 30 kV Impulse withstand Test IEC 60502-4, cl.18
1022 ELECTRICAL- CABLES &WIRES
Test Requirements on accessories For cables with ratedvoltage from 6 kV up to 30 kV
Electrical Heat cycle Test /LoadCycle Test IEC 60502-4
1023 ELECTRICAL- CABLES &WIRES
Test Requirements on accessories For cables with ratedvoltage from 6 kV up to 30 kV
Electrical Heat cycle Test /LoadCycle Test IEC 60502-4
1024 ELECTRICAL- CABLES &WIRES
Test Requirements on accessories For cables with ratedvoltage from 6 kV up to 30 kV
Power Frequency WithstandTest/ Dielectric strength IEC 60502 part 4
1025 ELECTRICAL- CABLES &WIRES
Test Requirements on accessories For cables with ratedvoltage from 6 kV up to 30 kV
Power Frequency WithstandTest/ Dielectric strength IEC 60502, Part-4
1026 ELECTRICAL- CABLES &WIRES
Test Requirements on accessories For cables with ratedvoltage from 6 kV up to 30 kV
Power Frequency WithstandTest/ Dielectric strength IEC 60502 part 4
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 67 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1027 ELECTRICAL- CABLES &WIRES
Test Requirements on accessories For cables with ratedvoltage from 6 kV up to 30 kV DC withstand Test IEC 60502 part 4, Table.5,6&7
1028 ELECTRICAL- CABLES &WIRES
Test Requirements on accessories for Power Cables from3.6/6 kV up to 20.8/36 kV
Power Frequency WithstandTest/ Dielectric strength
IEC 60502 Part IV (Table 5,6&7)
1029 ELECTRICAL- CABLES &WIRES
Test Requirements on accessories for Power Cables from3.6/6 kV up to 20.8/36 kV
Power Frequency WithstandTest/ Dielectric strength
IEC 60502 Part IV-(Table 5,6&7)
1030 ELECTRICAL- CABLES &WIRES
Tests for electric cables under fire conditions- circuitintegrity Fire resistance/ Circuit Integrity IEC 60331 pt.11,21,23 & 25
1031 ELECTRICAL- CABLES &WIRES
Tests on cable over sheaths which have a specialprotective function and applied by extrusion DC Withstand test IEC 60229
1032 ELECTRICAL- CABLES &WIRES
Tests on Electric & Optical fibre Cables under fireconditions – Test for vertical flame propagation for a Singleinsulated wire or Cable
Flame Retardant test(Flammability test)
IEC 60332-2-1-04 IEC60332-2-2
1033 ELECTRICAL- CABLES &WIRES
Tests on Electric & Optical fibre Cables under fireconditions – Test for vertical flame propagation for a Singleinsulated wire or Cable Tests on Electric Cables under fireconditions – Single Cable
Flame Retardant test(Flammability test)
IEC 60332-1-1-04, Amd 1, IEC60332-1-2-04, Amd 1, IEC60332-1-3, Amd 1
1034 ELECTRICAL- CABLES &WIRES
Tests on Electric Cables under fire conditions – Test forvertical flame spread of vertically mounted Bunched wiresor Cables
Flame retardant Test forBunched Cables
IEC 60332-3-10-00, IEC60332-3-21-00, IEC60332-3-22-00, IEC60332-3-23-00, IEC60332-23-00, IEC60332-3-24-00,IEC60332-3-25-00, IEEE 383
1035 ELECTRICAL- CABLES &WIRES
Thermosetting insulated , armoured Cables of ratedvoltages of 600/1000 V & 1900/3300 V for fixed installation Ageing air bomb BS 5467 cl.14
1036 ELECTRICAL- CABLES &WIRES
Thermosetting insulated , armoured Cables of ratedvoltages of 600/1000 V & 1900/3300 V for fixed installation Ageing in air oven BS 5467 cl.14
1037 ELECTRICAL- CABLES &WIRES
Thermosetting insulated , armoured Cables of ratedvoltages of 600/1000 V & 1900/3300 V for fixed installation Annealing test BS 5467 cl.14
1038 ELECTRICAL- CABLES &WIRES
Thermosetting insulated , armoured Cables of ratedvoltages of 600/1000 V & 1900/3300 V for fixed installation
Breaking strength test(Elongation at break test) BS 5467 cl.14
1039 ELECTRICAL- CABLES &WIRES
Thermosetting insulated , armoured Cables of ratedvoltages of 600/1000 V & 1900/3300 V for fixed installation Carbon Black content test BS 5467 cl.14
1040 ELECTRICAL- CABLES &WIRES
Thermosetting insulated , armoured Cables of ratedvoltages of 600/1000 V & 1900/3300 V for fixed installation
Conductor Resistance Test/Armour resistivity Test BS 5467, cl. 14
1041 ELECTRICAL- CABLES &WIRES
Thermosetting insulated , armoured Cables of ratedvoltages of 600/1000 V & 1900/3300 V for fixed installation Dielectric withstand test BS 5467 cl.14
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 68 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1042 ELECTRICAL- CABLES &WIRES
Thermosetting insulated , armoured Cables of ratedvoltages of 600/1000 V & 1900/3300 V for fixed installation Dimension of Armour Material BS 5467, cl.14
1043 ELECTRICAL- CABLES &WIRES
Thermosetting insulated , armoured Cables of ratedvoltages of 600/1000 V & 1900/3300 V for fixed installation Drainage test BS 5467 cl.14
1044 ELECTRICAL- CABLES &WIRES
Thermosetting insulated , armoured Cables of ratedvoltages of 600/1000 V & 1900/3300 V for fixed installation Dripping test BS 5467 cl.14
1045 ELECTRICAL- CABLES &WIRES
Thermosetting insulated , armoured Cables of ratedvoltages of 600/1000 V & 1900/3300 V for fixed installation
Fire Retardant/ FlammabilityTest BS 5467 cl. 14
1046 ELECTRICAL- CABLES &WIRES
Thermosetting insulated , armoured Cables of ratedvoltages of 600/1000 V & 1900/3300 V for fixed installation Heat Shock test BS 5467 cl.14
1047 ELECTRICAL- CABLES &WIRES
Thermosetting insulated , armoured Cables of ratedvoltages of 600/1000 V & 1900/3300 V for fixed installation Hot Deformation test BS 5467 cl.14
1048 ELECTRICAL- CABLES &WIRES
Thermosetting insulated , armoured Cables of ratedvoltages of 600/1000 V & 1900/3300 V for fixed installation Hot set test BS 5467 cl.14
1049 ELECTRICAL- CABLES &WIRES
Thermosetting insulated , armoured Cables of ratedvoltages of 600/1000 V & 1900/3300 V for fixed installation Loss of mass test BS 5467 cl.14
1050 ELECTRICAL- CABLES &WIRES
Thermosetting insulated , armoured Cables of ratedvoltages of 600/1000 V & 1900/3300 V for fixed installation
Mechanical test TensileStrength test BS 5467 cl.14
1051 ELECTRICAL- CABLES &WIRES
Thermosetting insulated , armoured Cables of ratedvoltages of 600/1000 V & 1900/3300 V for fixed installation Mineral Oil immersion test BS 5467 cl.14
1052 ELECTRICAL- CABLES &WIRES
Thermosetting insulated , armoured Cables of ratedvoltages of 600/1000 V & 1900/3300 V for fixed installation
Power Frequency withstandtest BS 5467 cl.14
1053 ELECTRICAL- CABLES &WIRES
Thermosetting insulated , armoured Cables of ratedvoltages of 600/1000 V & 1900/3300 V for fixed installation
Power Frequency WithstandTest/ Dielectric strength BS 5467, cl.14
1054 ELECTRICAL- CABLES &WIRES
Thermosetting insulated , armoured Cables of ratedvoltages of 600/1000 V & 1900/3300 V for fixed installation
Pressure test at hightemperature BS 5467 cl.14
1055 ELECTRICAL- CABLES &WIRES
Thermosetting insulated , armoured Cables of ratedvoltages of 600/1000 V & 1900/3300 V for fixed installation Shrinkage test BS 5467 cl.14
1056 ELECTRICAL- CABLES &WIRES
Thermosetting insulated , armoured Cables of ratedvoltages of 600/1000 V & 1900/3300 V for fixed installation Tear Resistance test BS 5467 cl.14
1057 ELECTRICAL- CABLES &WIRES
Thermosetting insulated , armoured Cables of ratedvoltages of 600/1000 V & 1900/3300 V for fixed installation Test for Resistance to cracking BS 5467 cl.14
1058 ELECTRICAL- CABLES &WIRES
Thermosetting insulated , armoured Cables of ratedvoltages of 600/1000 V & 1900/3300 V for fixed installation Thickness and dimension test BS 5467 cl.14
1059 ELECTRICAL- CABLES &WIRES
Thermosetting insulated , armoured Cables of ratedvoltages of 600/1000 V & 1900/3300 V for fixed installation Water Absorption (Gravimetric) BS 5467 cl.14
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 69 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1060 ELECTRICAL- CABLES &WIRES
Thermosetting insulated, armoured fire resistant 600/1000V Cable having low emission of smoke and corrosive gases Test for resistance to cracking BS 7846, Cl.14
1061 ELECTRICAL- CABLES &WIRES
Thermosetting insulated, armoured fire resistant 600/1000V Cable having low emission of smoke and corrosive gases Ageing in air bomb BS 7846, Cl.14
1062 ELECTRICAL- CABLES &WIRES
Thermosetting insulated, armoured fire resistant 600/1000V Cable having low emission of smoke and corrosive gases Ageing in air oven BS 7846, Cl.14
1063 ELECTRICAL- CABLES &WIRES
Thermosetting insulated, armoured fire resistant 600/1000V Cable having low emission of smoke and corrosive gases Hot Deformation test BS 7846, Cl.14
1064 ELECTRICAL- CABLES &WIRES
Thermosetting insulated, armoured fire resistant 600/1000V Cable having low emission of smoke and corrosive gases Hot set test BS 7846, Cl.14
1065 ELECTRICAL- CABLES &WIRES
Thermosetting insulated, armoured fire resistant 600/1000V Cable having low emission of smoke and corrosive gases Loss of mass test BS 7846, Cl.14
1066 ELECTRICAL- CABLES &WIRES
Thermosetting insulated, armoured fire resistant 600/1000V Cable having low emission of smoke and corrosive gases Mineral Oil immersion test BS 7846, Cl.14
1067 ELECTRICAL- CABLES &WIRES
Thermosetting insulated, armoured fire resistant 600/1000V Cable having low emission of smoke and corrosive gases
Pressure test at hightemperature BS 7846, Cl.14
1068 ELECTRICAL- CABLES &WIRES
Thermosetting insulated, armoured fire resistant 600/1000V Cable having low emission of smoke and corrosive gases Shrinkage test BS 7846, Cl.14
1069 ELECTRICAL- CABLES &WIRES
Transition Joints of Power Cables from 11 kV up to andincluding 33 kV Armour Resistance test IS 13705
1070 ELECTRICAL- CABLES &WIRES
Transition Joints of Power Cables from 11 kV up to andincluding 33 kV Conductor Resistance test IS 13705
1071 ELECTRICAL- CABLES &WIRES
Transition Joints of Power Cables from 11 kV up to andincluding 33 kV DC withstand Test IS 13705
1072 ELECTRICAL- CABLES &WIRES
Transition Joints of Power Cables from 11 kV up to andincluding 33 kV Type tests for joints for 600/1000volts CNECable Systems
Mechanical Test: Impact Test IS 13705
1073 ELECTRICAL- CABLES &WIRES
Transition Joints of Power Cables from 11 kV up to andincluding 33kV
Power Frequency WithstandTest/ Dielectric strength IS 13705
1074 ELECTRICAL- CABLES &WIRES
Transition Joints of Power Cables from 11 kV up to andincluding 33kV
Power Frequency WithstandTest/ Dielectric strength IS 13705
1075 ELECTRICAL- CABLES &WIRES
Transition Joints of Power Cables from 11 kV upto andincluding 33 kV Capacitance Measurement IS 13705
1076 ELECTRICAL- CABLES &WIRES
Transition Joints of Power Cables from 11 kV upto andincluding 33 kV
Electrical Heat cycle Test /LoadCycle Test/ Water penetrationTest/ Pre Qualifciation Test
IS 13705
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 70 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1077 ELECTRICAL- CABLES &WIRES
Transition Joints of Power Cables from 11 kV upto andincluding 33 kV
Electrical Heat cycle Test /LoadCycle Test/ Water penetrationTest/ Pre Qualifciation Test
IS 13705
1078 ELECTRICAL- CABLES &WIRES
Transition Joints of Power Cables from 11 kV upto andincluding 33 kV
Impulse withstand Test/ PreQualification Test IS 13705
1079 ELECTRICAL- CABLES &WIRES
Transition Joints of Power Cables from 11 kV upto andincluding 33 kV Partial discharge Test IS 13705
1080 ELECTRICAL- CABLES &WIRES
Transition Joints of Power Cables from 11 kV upto andincluding 33kV
Insulation Resistance Test/Volume resistivity/ IR Constant IS 13705
1081 ELECTRICAL- CABLES &WIRES
Transition Joints of Power Cables from 11 kV upto andincluding 33kV
Tan Delta Measurement atambient and elevatedtemperature
IS 13705
1082 ELECTRICAL- CABLES &WIRES Type tests for joint for 600/1000 volts CNE Cable Systems Power Frequency Withstand
Test/ Dielectric strength BSEN 50393, cl.8
1083 ELECTRICAL- CABLES &WIRES Type tests for joint for 600/1000 volts CNE Cable Systems Power Frequency Withstand
Test/ Dielectric strength BSEN 50393, cl.8
1084 ELECTRICAL- CABLES &WIRES Type tests for joints for 600/1000 volts CNE Cable Systems Electrical Heat cycle test BS EN-50393, Cl.8
1085 ELECTRICAL- CABLES &WIRES Type tests for joints for 600/1000 volts CNE Cable Systems Impulse withstand test BS EN – 50393- (Cl.8)
1086 ELECTRICAL- CABLES &WIRES Type tests for joints for 600/1000 volts CNE Cable Systems Insulation Resistance test BS EN -50393, Cl.8
1087 ELECTRICAL- CABLES &WIRES Type tests for joints for 600/1000 volts CNE Cable Systems IR Constant test BS EN-50393, Cl.8
1088 ELECTRICAL- CABLES &WIRES Type tests for joints for 600/1000 volts CNE Cable Systems Mechanical Test: Impact Test BS EN 50393-(Cl.8)
1089 ELECTRICAL- CABLES &WIRES Type tests for joints for 600/1000 volts CNE Cable Systems Pre qualification test BS EN-50393, Cl.8
1090 ELECTRICAL- CABLES &WIRES Type tests for joints for 600/1000 volts CNE Cable Systems Volume Resistivity test BS EN-50393, Cl.8
1091 ELECTRICAL- CABLES &WIRES Uniformity & Mass of Zinc Coating on steel armour
Galvanising test (Uniformity ofZinc coating & Mass of Zinccoating)
IS 10810 part 40-41
1092 ELECTRICAL- CABLES &WIRES Unsaturated polyester Resin systems Fire Retardant/ Flammability
Test IS 6746- APPENDIX-N
1093 ELECTRICAL- CABLES &WIRES Water Absorption Test (Gravimetric) Water Absorption (Gravimetric) IS 10810 pt.33
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 71 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1094 ELECTRICAL- CABLES &WIRES
XLPE Insulated Cables for working voltages from 66.kV upto and including 220 kV Ageing in air bomb IS 7098 Pt. III, Amd I, Amd 2,
Amd III ( Cl.19)
1095 ELECTRICAL- CABLES &WIRES
XLPE Insulated Cables for working voltages from 66.kV upto and including 220 kV Ageing in air oven IS 7098 Pt. III, Amd I,Amd 2 Am
III ( Cl.19)
1096 ELECTRICAL- CABLES &WIRES
XLPE Insulated Cables for working voltages from 66.kV upto and including 220 kV Carbon Black content test IS 7098 Pt. III, Amd. I, Amd. 2
Am III ( Cl.19)
1097 ELECTRICAL- CABLES &WIRES
XLPE Insulated Cables for working voltages from 66.kV upto and including 220 kV Heat Shock test IS 7098 Pt. III, Amd I, Amd 2
Amd III ( Cl.19)
1098 ELECTRICAL- CABLES &WIRES
XLPE Insulated Cables for working voltages from 66.kV upto and including 220 kV Hot Deformation test IS 7098 Pt. III, Amd I, Amd 2
Amd III ( Cl.19)
1099 ELECTRICAL- CABLES &WIRES
XLPE Insulated Cables for working voltages from 66.kV upto and including 220 kV Hot set test IS 7098 Pt. III, Amd I, Amd 2
Amd III ( Cl.19)
1100 ELECTRICAL- CABLES &WIRES
XLPE Insulated Cables for working voltages from 66.kV upto and including 220 kV Loss of mass test IS 7098 Pt. III, Amd I, Amd 2
Amd III ( Cl.19)
1101 ELECTRICAL- CABLES &WIRES
XLPE Insulated Cables for working voltages from 66.kV upto and including 220 kV
Pressure test at hightemperature
IS 7098 Pt. III, Amd I, Amd 2Amd III ( Cl.19)
1102 ELECTRICAL- CABLES &WIRES
XLPE Insulated Cables for working voltages from 66.kV upto and including 220 kV Shrinkage test S 7098 Pt. III, Amd I, Amd 2
Amd III ( Cl.19):1993
1103 ELECTRICAL- CABLES &WIRES
XLPE Insulated Cables for working voltages from 66.kV upto and including 220 kV Test for resistance to cracking IS 7098 Pt. III, Amd I, Amd 2,
Amd III ( Cl.19):1993
1104 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables For voltages up to andincluding 1.1 kV
Thermal Stability Test for PVCmaterial IS 7098 part1 cl.16
1105 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables For voltages up to andincluding 1.1kV Water Absorption (Gravimetric) IS 7098 part 1, cl.16
1106 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables for voltages up to andincluding 1.1 kV Ageing in air bomb IS 7098 part 1, cl.16
1107 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables for voltages up to andincluding 1.1 kV Ageing in air oven IS 7098 part 1, cl.16
1108 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables for voltages up to andincluding 1.1 kV
Breaking strength test(Elongation at break test) IS 7098 part 1, cl.16
1109 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables for voltages up to andincluding 1.1 kV Carbon Black content test IS 7098 part 1 cl.16
1110 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables for voltages up to andincluding 1.1 kV
Flame Retardancy test(Sweedish Chimney test) IS 7098 part 1, cl. 16
1111 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables for voltages up to andincluding 1.1 kV
Flame Retardancy test onBunched Cables IS 7098 part 1 cl.16
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 72 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1112 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables for voltages up to andincluding 1.1 kV
Flame Retardant test(Flammability test) IS 7098 part 1, cl. 16
1113 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables for voltages up to andincluding 1.1 kV Heat shock test IS 7098 part 1, cl.16
1114 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables for voltages up to andincluding 1.1 kV Hot deformation test IS 7098 part 1, cl.16
1115 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables for voltages up to andincluding 1.1 kV Hot set test IS 7098 part 1, cl.16
1116 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables for voltages up to andincluding 1.1 kV Insulation Resistance test IS 7098 part 1, cl.16
1117 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables for voltages up to andincluding 1.1 kV IR Constant test IS 7098 part 1, cl.16
1118 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables for voltages up to andincluding 1.1 kV Loss of mass test IS 7098 part 1, cl.16
1119 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables for voltages up to andincluding 1.1 kV
Mechanical test Tensilestrength test IS 7098 part 1, cl.16
1120 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables for voltages up to andincluding 1.1 kV
Pressure test at hightemperature IS 7098 part 1 cl.16
1121 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables for voltages up to andincluding 1.1 kV Shrinkage test IS 7098 part 1, cl.16
1122 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables for voltages up to andincluding 1.1 kV Tear Resistance test IS 7098 part 1, cl.16
1123 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables for voltages up to andincluding 1.1 kV Test for Resistance to cracking IS 7098 part 1 cl.16
1124 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables for voltages up to andincluding 1.1 kV Thickness and dimension test IS 7098 part 1 cl.16
1125 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables for voltages up to andincluding 1.1 kV Thickness and dimension test IS 7098 part 3
1126 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables for voltages up to andincluding 1.1 kV Volume Resistivity tets IS 7098 part 1, cl.16
1127 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables For voltages up to andincluding 1.1kV Armour Resistivity test IS 7098 part 1, cl.16
1128 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables For voltages up to andincluding 1.1kV Cold bend test IS 7098 part 1, cl. 15
1129 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables For voltages up to andincluding 1.1kV Cold Bend test IS 7098 part 1, cl.16
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 73 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1130 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables For voltages up to andincluding 1.1kV Conductor Resistance test IS 7098 part 1, cl.16
1131 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables for voltages up to andincluding 1.1kV Dimension of Armour Material IS 7098 part 1, cl.16
1132 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables for voltages up to andincluding 1.1kV
Galvanising test (Uniformity ofZinc coating & Mass of Zinccoating)
IS 7098 pt. 1 cl.16
1133 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables For voltages up to andincluding 1.1kV
Mechanical test Cold Impacttest IS 7098 part 1, cl. 15
1134 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables For voltages up to andincluding 1.1kV
Mechanical test Cold Impacttest IS 7098 part 1, cl.16
1135 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables For working voltagesfrom 3.3 kV up to and including 33 kV Partial discharge Test IS 7098 (part 2) cl.19.20.2)
1136 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables For working voltagesfrom 3.3 kV up to and including 33 kV Electrical Heat cycle test IS 7098 part 2
1137 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables For working voltagesfrom 3.3 kV up to and including 33 kV Impulse withstand Test IS 7098 part 2 cl.19
1138 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables For working voltagesfrom 3.3 kV up to and including 33 kV Water Penetration test IS 7098 part 2,
1139 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables For working voltagesfrom 3.3 kV up to and including 33KV Capacitance Measurement IS 7098 part 2, cl. 19
1140 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables for working voltagesup to 1.1 kV
Power Frequency WithstandTest/ Dielectric strength
IS 7098 Part I-AmI,Am2,AM3(Cl.16)
1141 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables for working voltagesup to 1.1 kV
Power Frequency WithstandTest/ Dielectric strength
IS 7098 Part I-AmI,Am2,AM3(Cl.16)
1142 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables fr voltages up to andincluding 1.1 kV Bending test IS 7098 part 1, cl.16
1143 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables fr voltages up to andincluding 1.1 kV Torsion test IS 7098 part 1, cl.16
1144 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables fr voltages up to andincluding 1.1 kV Winding test IS 7098 part 1, cl.16
1145 ELECTRICAL- CABLES &WIRES
XLPE Insulated PVC sheathed Cables fr voltages up to andincluding 1.1 kV Wrapping test IS 7098 part 1, cl.16
1146 ELECTRICAL- CABLES &WIRES
XLPE Insulated Thermoplastic sheathed Cables For workingvoltages from 3.3 kV up to and including 33 kV Capacitance Measurement IS 7098 Part II , Am I (Cl.19)
1147 ELECTRICAL- CABLES &WIRES
XLPE Insulated Thermoplastic sheathed Cables For workingvoltages from 3.3 kV up to and including 33 kV
Galvanising test (Uniformity ofZinc coating & Mass of Zinccoating)
IS 7098 part 2, Cl.19
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 74 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1148 ELECTRICAL- CABLES &WIRES
XLPE Insulated Thermoplastic sheathed Cables For workingvoltages from 3.3 kV up to and including 33 kV
Power Frequency WithstandTest/ Dielectric strength IS 7098 part 2, Cl.19
1149 ELECTRICAL- CABLES &WIRES
XLPE Insulated Thermoplastic sheathed Cables For workingvoltages from 3.3 kV up to and including 33 kV
Power Frequency WithstandTest/ Dielectric strength IS 7098 part 2, Cl.19
1150 ELECTRICAL- CABLES &WIRES
XLPE Insulated Thermoplastic sheathed Cables For workingvoltages from 3.3 kV up to and including 33 kV
Tan delta at ambient andelevated temperature IS 7098 Part II , Amd I (Cl.19)
1151 ELECTRICAL- CABLES &WIRES
XLPE Insulated Thermoplastic sheathed Cables For workingvoltages from 3.3 kV up to and including 33 kV Thickness and dimension test IS 7098 part 2 cl. 19
1152 ELECTRICAL- CABLES &WIRES
XLPE Insulated Thermoplastic sheathed Cables For workingvoltages from 3.3 kV up to and including 33 kV Water Absorption (Gravimetric) IS 7098 part 2, cl.19
1153 ELECTRICAL- CABLES &WIRES
XLPE Insulated Thermoplastic sheathed Cables For workingvoltages from 3.3 kV up to and including 33 kV
Conductor Resistance Test/Armour resistivity Test IS 7098 part 2, cl.19
1154 ELECTRICAL- CABLES &WIRES
XLPE Insulated thermoplastic sheathed Cables For workingvoltages from 66.kV up to and including 220 kV
Thermal Stability Test for PVCmaterial IS 7098 part 3
1155 ELECTRICAL- CABLES &WIRES
XLPE Insulated thermoplastic sheathed Cables For workingvoltages from 66.kV up to and including 220 kV
Thermal Stability Test for PVCmaterial
IS 7098 PART 3, Am 1 to 3Cl.19
1156 ELECTRICAL- CABLES &WIRES
XLPE Insulated thermoplastic sheathed Cables For workingvoltages above 33.kV up to and including 220 kV
Fire Retardant/ FlammabilityTest IS 7098 pt.3 cl.19
1157 ELECTRICAL- CABLES &WIRES
XLPE Insulated Thermoplastic sheathed Cables For workingvoltages from 3.3 kV up to and including 33 kV Ageing in Air Bomb IS 7098 part 2, cl.19
1158 ELECTRICAL- CABLES &WIRES
XLPE Insulated Thermoplastic sheathed Cables For workingvoltages from 3.3 kV up to and including 33 kV Ageing in air oven IS 7098 part 2, cl.19
1159 ELECTRICAL- CABLES &WIRES
XLPE Insulated Thermoplastic sheathed Cables For workingvoltages from 3.3 kV up to and including 33 kV Annealing test IS 7098 part 2, cl.19
1160 ELECTRICAL- CABLES &WIRES
XLPE Insulated Thermoplastic sheathed Cables For workingvoltages from 3.3 kV up to and including 33 kV bending test IS 7098 part 2, cl.19
1161 ELECTRICAL- CABLES &WIRES
XLPE Insulated Thermoplastic sheathed Cables For workingvoltages from 3.3 kV up to and including 33 kV
Breaking Strength test(Elongation at break) IS 7098 part 2, cl.19
1162 ELECTRICAL- CABLES &WIRES
XLPE Insulated Thermoplastic sheathed Cables For workingvoltages from 3.3 kV up to and including 33 kV Carbon Black content test IS 7098 part 2, cl.19
1163 ELECTRICAL- CABLES &WIRES
XLPE Insulated Thermoplastic sheathed Cables For workingvoltages from 3.3 kV up to and including 33 kV Cold bend test IS 7098 part 2, cl.19
1164 ELECTRICAL- CABLES &WIRES
XLPE Insulated Thermoplastic sheathed Cables For workingvoltages from 3.3 kV up to and including 33 kV Cold Elongation test IS 7098 part 2, cl.19
1165 ELECTRICAL- CABLES &WIRES
XLPE Insulated Thermoplastic sheathed Cables For workingvoltages from 3.3 kV up to and including 33 kV
Flame Retardancy test(Sweedish Chimney test) IS 7098 part 2, cl.19
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 75 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1166 ELECTRICAL- CABLES &WIRES
XLPE Insulated Thermoplastic sheathed Cables For workingvoltages from 3.3 kV up to and including 33 kV
Flame Retardant test(Flammability test) IS 7098 part 2, cl.19
1167 ELECTRICAL- CABLES &WIRES
XLPE Insulated Thermoplastic sheathed Cables For workingvoltages from 3.3 kV up to and including 33 kV
Flame retardant test onBunched Cables IS 7098 part 2, cl.19
1168 ELECTRICAL- CABLES &WIRES
XLPE Insulated Thermoplastic sheathed Cables For workingvoltages from 3.3 kV up to and including 33 kV Heat Shock test IS 7098 part 2, cl.19
1169 ELECTRICAL- CABLES &WIRES
XLPE Insulated Thermoplastic sheathed Cables For workingvoltages from 3.3 kV up to and including 33 kV Hot Deformation test IS 7098 part 2, cl.19
1170 ELECTRICAL- CABLES &WIRES
XLPE Insulated Thermoplastic sheathed Cables For workingvoltages from 3.3 kV up to and including 33 kV Hot set test IS 7098 part 2, cl.19
1171 ELECTRICAL- CABLES &WIRES
XLPE Insulated Thermoplastic sheathed Cables For workingvoltages from 3.3 kV up to and including 33 kV Insulation Resistance test IS 7098 part 2, cl.19
1172 ELECTRICAL- CABLES &WIRES
XLPE Insulated Thermoplastic sheathed Cables For workingvoltages from 3.3 kV up to and including 33 kV IR Constant test IS 7098 part 2, cl.19
1173 ELECTRICAL- CABLES &WIRES
XLPE Insulated Thermoplastic sheathed Cables For workingvoltages from 3.3 kV up to and including 33 kV Loss of mass test IS 7098 part 2, cl.19
1174 ELECTRICAL- CABLES &WIRES
XLPE Insulated Thermoplastic sheathed Cables For workingvoltages from 3.3 kV up to and including 33 kV
Mechanical test Cold impacttest IS 7098 part 2, cl.19
1175 ELECTRICAL- CABLES &WIRES
XLPE Insulated Thermoplastic sheathed Cables For workingvoltages from 3.3 kV up to and including 33 kV
Mechanical test Tensilestrength test IS 7098 part 2, cl.19
1176 ELECTRICAL- CABLES &WIRES
XLPE Insulated Thermoplastic sheathed Cables For workingvoltages from 3.3 kV up to and including 33 kV Mineral Oil Immersion test IS 7098 part 2, cl.19
1177 ELECTRICAL- CABLES &WIRES
XLPE Insulated Thermoplastic sheathed Cables For workingvoltages from 3.3 kV up to and including 33 kV
Pressure test at hightemperature IS 7098 part 2, cl.19
1178 ELECTRICAL- CABLES &WIRES
XLPE Insulated Thermoplastic sheathed Cables For workingvoltages from 3.3 kV up to and including 33 kV Shrinkage test IS 7098 part 2, cl.19
1179 ELECTRICAL- CABLES &WIRES
XLPE Insulated Thermoplastic sheathed Cables For workingvoltages from 3.3 kV up to and including 33 kV Tear Resistance test IS 7098 part 2, cl.19
1180 ELECTRICAL- CABLES &WIRES
XLPE Insulated Thermoplastic sheathed Cables For workingvoltages from 3.3 kV up to and including 33 kV Test for Resistance to cracking IS 7098 part 2, cl.19
1181 ELECTRICAL- CABLES &WIRES
XLPE Insulated Thermoplastic sheathed Cables For workingvoltages from 3.3 kV up to and including 33 kV Torsion test IS 7098 part 2, cl.19
1182 ELECTRICAL- CABLES &WIRES
XLPE Insulated Thermoplastic sheathed Cables For workingvoltages from 3.3 kV up to and including 33 kV Volume resistivity test IS 7098 part 2, cl.19
1183 ELECTRICAL- CABLES &WIRES
XLPE Insulated Thermoplastic sheathed Cables For workingvoltages from 3.3 kV up to and including 33 kV Winding test IS 7098 part 2, cl.19
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 76 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1184 ELECTRICAL- CABLES &WIRES
XLPE Insulated Thermoplastic sheathed Cables For workingvoltages from 3.3 kV up to and including 33 kV Wrapping test IS 7098 part 2, cl.19
1185 ELECTRICAL- CABLES &WIRES
XLPE Insulated thermoplastic sheathed Cables for workingvoltages from 66.kV up to and including 220 kV Bending test IS 7098 part 3 cl.19
1186 ELECTRICAL- CABLES &WIRES
XLPE Insulated thermoplastic sheathed Cables for workingvoltages from 66.kV up to and including 220 kV Capacitance Measurement IS 7098 part 3, cl. 19
1187 ELECTRICAL- CABLES &WIRES
XLPE Insulated thermoplastic sheathed Cables for workingvoltages from 66.kV up to and including 220 kV Cold bend test IS 7098 part 3 cl.19
1188 ELECTRICAL- CABLES &WIRES
XLPE Insulated thermoplastic sheathed Cables for workingvoltages from 66.kV up to and including 220 kV Cold Elongation test IS 7098 part 3 cl.19
1189 ELECTRICAL- CABLES &WIRES
XLPE Insulated thermoplastic sheathed Cables for workingvoltages from 66.kV up to and including 220 kV Conductor Resistance test IS 7098 part 3 cl.19
1190 ELECTRICAL- CABLES &WIRES
XLPE Insulated thermoplastic sheathed Cables for workingvoltages from 66.kV up to and including 220 kV Dimension of Armour Material IS 7098 pt 3, cl.19
1191 ELECTRICAL- CABLES &WIRES
XLPE Insulated thermoplastic sheathed Cables for workingvoltages from 66.kV up to and including 220 kV Electrical Heat Cycle test IS 7098 part 3 cl.19
1192 ELECTRICAL- CABLES &WIRES
XLPE Insulated thermoplastic sheathed Cables for workingvoltages from 66.kV up to and including 220 kV Electrical heat cycle test IS 7098 part 3, cl.19
1193 ELECTRICAL- CABLES &WIRES
XLPE Insulated thermoplastic sheathed Cables for workingvoltages from 66.kV up to and including 220 kV
Mechanical test Cold Impacttest IS 7098 Part-3, Cl.19
1194 ELECTRICAL- CABLES &WIRES
XLPE Insulated thermoplastic sheathed Cables for workingvoltages from 66.kV up to and including 220 kV Partial Discharge test IS 7098 part 3, cl.19
1195 ELECTRICAL- CABLES &WIRES
XLPE Insulated thermoplastic sheathed Cables for workingvoltages from 66.kV up to and including 220 kV
Power Frequency WithstandTest/ Dielectric strength IS 7098 part 3,cl.19
1196 ELECTRICAL- CABLES &WIRES
XLPE Insulated thermoplastic sheathed Cables for workingvoltages from 66.kV up to and including 220 kV
Power Frequency WithstandTest/ Dielectric strength IS 7098 part 3,cl.19
1197 ELECTRICAL- CABLES &WIRES
XLPE Insulated thermoplastic sheathed Cables for workingvoltages from 66.kV up to and including 220 kV Resistivity of Armour test IS 7098 part 3, cl.19
1198 ELECTRICAL- CABLES &WIRES
XLPE Insulated thermoplastic sheathed Cables for workingvoltages from 66.kV up to and including 220 kV
Tan Delta Measurement atambient and elevatedtemperature
IS 7098 pt. 3, cl. 19
1199 ELECTRICAL- CABLES &WIRES
XLPE Insulated thermoplastic sheathed Cables for workingvoltages from 66.kV up to and including 220 kV Torsion test IS 7098 part 3, cl.19
1200 ELECTRICAL- CABLES &WIRES
XLPE Insulated thermoplastic sheathed Cables for workingvoltages from 66.kV up to and including 220 kV Water Penetration test IS 7098 part 3, cl.19
1201 ELECTRICAL- CABLES &WIRES
XLPE Insulated thermoplastic sheathed Cables For workingvoltages from 66.kV up to and including 220kV
Galvanising test (Uniformity ofZinc coating & Mass of Zinccoating)
IS 7098 pt 3 cl. 19
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 77 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1202 ELECTRICAL- CABLES &WIRES
XLPE Insulated thermoplastic sheathed Cables fr workingvoltages from 66.kV up to and including 220 kV Impulse withstand Test IS 7098 pt3, cl.19
1203 ELECTRICAL- CAPACITORS Shunt capacitors for the self-healing type for ac powersystems having a rated voltage upto and including 1000 V Ageing test
Cl. 17 of IS 13340 (Part 1) 2012/ IEC 60831-1-2002, IEC60831-1
1204 ELECTRICAL- CAPACITORS AC Motor capacitorsRobustness of termination andflexibility test- Tensile,Bending, Torsion, Torque
IS 2993 1998, Cl.2.11 IEC60252-1 2013, Cl.5.1.11-IEC60252-2
1205 ELECTRICAL- CAPACITORS AC Motor capacitors Damp Heat testIS 2993:1998, Cl.2.14, -IEC60252-1-2013, Cl.5.14, 2013,Cl.5.1.14-IEC 60252-2
1206 ELECTRICAL- CAPACITORS AC Motor capacitors Capacitance MeasurementIS 2993: 1998-Cl.2.9, IEC60252-1-Amd-1- 2013-Cl. 5.9,Cl.5.1.9- IEC 60252-2 -Amd.1
1207 ELECTRICAL- CAPACITORS AC Motor capacitors Tan delta MeasurementIS 2993: 1998- Cl.2.5, IEC60252-1-2013- Cl.5.5, Cl.5.1.5-IEC 60252-2
1208 ELECTRICAL- CAPACITORS AC Motor capacitors Self Healing Test IS 2993: 1998-Cl.2.15,Cl.5.15,IEC 60252-1
1209 ELECTRICAL- CAPACITORS AC Motor capacitors Check for dimensionsIS 2993 1998, Cl.2.11 IEC60252-1 2013, Cl.5.1.11-IEC60252-2
1210 ELECTRICAL- CAPACITORS AC Motor capacitors Dielectric strength or Voltagetest between terminals
IS 2993: 1998,Cl.2.7, IEC60252-1 2013 Cl.5.7, Cl.5.1.7-IEC 60252-2
1211 ELECTRICAL- CAPACITORS AC Motor capacitors Endurance testIS 2993 1998, Cl.2.13, IEC60252-1-2013, Cl.5.13,Cl.5.1.13-IEC 60252-2
1212 ELECTRICAL- CAPACITORS AC Motor capacitors Robustness of termination -Soldering test
IS 2993 1998, Cl.2.11 IEC60252-1 2013, Cl.5.1.11-IEC60252-2
1213 ELECTRICAL- CAPACITORS AC Motor capacitors Sealing TestIS 2993 1998,Cl.2.12, IEC60252-1 Cl.5.12, Cl.5.1.12-IEC60252-2
1214 ELECTRICAL- CAPACITORS AC Motor capacitorsVisual Examination for theName Plate Details , check formarking
IS 2993 1998,Cl.5.1&Cl.2.6,Cl.5.6 & Cl.8- IEC60252-1-2013, Cl.5.1.6 &Cl.5.4-IEC 60252-2-2013,Cl..7.2-IS 1709, Cl.5.4-IS 1569
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 78 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1215 ELECTRICAL- CAPACITORS AC Motor capacitors Voltage test between terminalsand container/case
IS 2993: 1998,Cl.2.8, IEC60252-1 2013 Cl.5.8, Cl.5.1.8-IEC 60252-2
1216 ELECTRICAL- CAPACITORS AC Motor capacitors or Fan capacitors Destruction testIS 2993 1998,Cl.2.16, IEC60252-1 2013, Cl.5.16,Cl.5.1.16-IEC 60252-2
1217 ELECTRICAL- CAPACITORS APFC panel for voltage upto and including 1000 V Insulation Resistance Test Cl. 5.5-IS 16636
1218 ELECTRICAL- CAPACITORS APFC Panel for voltage upto and including 1000 V Temperature Rise Test Cl. 5.9-IS 16636
1219 ELECTRICAL- CAPACITORS APFC panel for voltage upto and Including 1000 V Verification of output Cl.5.3-IS 16636
1220 ELECTRICAL- CAPACITORS APFC panels for voltage upto and including 1000 V Lightning Impulse voltagewithstand test Cl.5.8-IS 16636
1221 ELECTRICAL- CAPACITORS APFC panels Voltage upto and including 1000V Power frequency withstandvoltage test between phases Cl. 5.7 -IS 16636
1222 ELECTRICAL- CAPACITORS Automatic power factor correction (APFC) Panels forvoltage rating up to and including 1000 V Dielectric tests Cl. 5.4- IS 16636
1223 ELECTRICAL- CAPACITORS Automatic power factor correction (APFC) Panels forvoltage rating up to and including 1000 V
Inspection of the panelincluding inspection wiring Cl. 5.17- IS 16636
1224 ELECTRICAL- CAPACITORS Automatic power factor correction (APFC) Panels forvoltage rating up to and including 1000 V
Measurement of transient overcurrents due to capacitorswitching
Cl. 5.16-IS 16636
1225 ELECTRICAL- CAPACITORS Automatic power factor correction (APFC) Panels forvoltage rating up to and including 1000 V
Power Frequency test betweenterminals and body Cl. 5.6-IS 16636
1226 ELECTRICAL- CAPACITORS Automatic power factor correction (APFC) Panels forvoltage rating up to and including 1000 V
Test for checking the functionaloperation Cl. 5.18- IS 16636
1227 ELECTRICAL- CAPACITORS Automatic power factor correction (APFC) Panels forvoltage rating up to and including 1000 V
Verification of theeffectiveness of automatic PFcorrection
Cl. 5.15-IS 16636
1228 ELECTRICAL- CAPACITORS Automatic power factor correction (APFC) Panels forvoltage rating up to and including 1000 V
Verification of theeffectiveness of connection Cl. 5.10.1- IS 16636
1229 ELECTRICAL- CAPACITORS Automatic power factor correction (APFC) Panels forvoltage rating up to and including 1000 V
Voltage withstand testbetween phases Cl. 5.7- IS 16636
1230 ELECTRICAL- CAPACITORS Capacitor for Power Electonics Test for Internal DischargeDevice Cl. 5.7-IEC 61071
1231 ELECTRICAL- CAPACITORS Capacitor for Power Electonics Voltage test between terminalsand container Cl. 5.5.2 & 5.6.1-IEC 61071
1232 ELECTRICAL- CAPACITORS Capacitor for Power Electronics Capacitance Measurement Cl. 5.3-IEC 61071
1233 ELECTRICAL- CAPACITORS Capacitor for Power Electronics Destruction Test Cl. 5.16-IEC 61071
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 79 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1234 ELECTRICAL- CAPACITORS Capacitor for Power Electronics Resonance frequency test Cl.5.12-IEC 61071
1235 ELECTRICAL- CAPACITORS Capacitor for Power Electronics Sealing Test Cl. 5.8-IEC 61071
1236 ELECTRICAL- CAPACITORS Capacitor for Power Electronics Tandelta Measurement Cl. 5.3 & Cl.5.4-IEC 61071
1237 ELECTRICAL- CAPACITORS Capacitor for Power Electronics Test of Internal DischargeDevice Cl. 5.7-IEC 61071
1238 ELECTRICAL- CAPACITORS Capacitor for Power Electronics Thermal Stability Test forCapacitors Cl. 5.10-IEC 61071
1239 ELECTRICAL- CAPACITORS Capacitors for electric fan motorsVoltage test Between terminalsand Container or Voltage testbetween terminal to case
Cl.7.4-IS 1709
1240 ELECTRICAL- CAPACITORS Capacitors for electric fan motorsCapacitance Measurement andCapacitance versustemperature
Cl.7.5,Cl.7.13-IS 1709
1241 ELECTRICAL- CAPACITORS Capacitors for electric fan motors Damp Heat test Cl.7.15-IS 1709
1242 ELECTRICAL- CAPACITORS Capacitors for electric fan motors Endurance test Cl.7.16-IS 1709
1243 ELECTRICAL- CAPACITORS Capacitors for electric fan motors Robustness of termination andflexibility test Cl. 7.8,7.9,7.10- IS 1709
1244 ELECTRICAL- CAPACITORS Capacitors for electric fan motors Robustness of termination -Soldering test Cl. 7.11- IS 1709
1245 ELECTRICAL- CAPACITORS Capacitors for electric fan motors Sealing Test Cl.7.12-IS 1709
1246 ELECTRICAL- CAPACITORS Capacitors for electric fan motors Self Healing Test Cl.7.14-IS 1709
1247 ELECTRICAL- CAPACITORS Capacitors for electric fan motors Tan delta Measurement Cl.7.6-IS 1709
1248 ELECTRICAL- CAPACITORS Capacitors for Power Electronics Disconnecting test on fuses Cl. 5.17-IEC 61071
1249 ELECTRICAL- CAPACITORS Capacitors for Power Electronics Endurance test Cl.5.15-IEC 61071
1250 ELECTRICAL- CAPACITORS Capacitors for Power Electronics Environmental Testing Cl. 5.13-IEC 61071
1251 ELECTRICAL- CAPACITORS Capacitors for Power Electronics External Inspection orDimension verification Cl.5.14.2- IEC 61071
1252 ELECTRICAL- CAPACITORS Capacitors for Power Electronics Self Healing Test Cl, 5.11-IEC 61071
1253 ELECTRICAL- CAPACITORS Capacitors for surge protection for use in voltage systemabove 1000 V & upto 45 kV
Capacitance measurement andOutput Test on Capacitors IS 11548-1986, RA
1254 ELECTRICAL- CAPACITORS Capacitors for surge protection for use in voltage systemabove 1000 V & upto 45 kV
Dielectric loss test & capacitorlosses test/Tan deltaMeasurement
Cl.9.4-IS 11548-1986 RA
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 80 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1255 ELECTRICAL- CAPACITORS Capacitors for surge protection for use in voltage systemabove 1000 V & upto 45 kV
Lightning Voltage withstandTest between terminals andContainer
Cl.9.6-IS 11548-1986 RA
1256 ELECTRICAL- CAPACITORS Capacitors for surge protection for use in voltage systemabove 1000 V & upto 45 kV Sealing test Cl.9.9-:IS 11548-1986, RA
1257 ELECTRICAL- CAPACITORS Capacitors for surge protection for use in voltage systemabove 1000 V & upto 45 kV Thermal Stability Test Cl. 9.3- IS 11548-1986 RA
1258 ELECTRICAL- CAPACITORS Capacitors for surge protection for use in voltage systemabove 1000 V & upto 45 kV Voltage test Cl.9.5-IS 11548, RA
1259 ELECTRICAL- CAPACITORS Coupling Capacitors ,Capacitive DividersLightning Voltage withstandTest between terminals andContainer
IS 9348:1998, Cl.9.2.5-IEC60358, RA 2004, IEC60358:1990, IEC 62146-1
1260 ELECTRICAL- CAPACITORS Coupling Capacitors ,Capacitive Dividers and GradingCapacitors
Voltage test at lowtemperature and Hightemperature
Cl.8.5 & Cl.9.5-IEC62146-1-2013-Am-1
1261 ELECTRICAL- CAPACITORS Coupling Capacitors ,Capacitive Dividers and GradingCapacitors for HVAC circuit breakers
Voltage withstand Testbetween terminals
IS 9348 1998, IEC 60358- 2004, IEC 60358-1990, IEC 62146-1
1262 ELECTRICAL- CAPACITORS Coupling Capacitors, Capacitive Dividers and GradingCapacitors
Power Frequency withstandtest or Voltage test betweenterminals and case
IS 9348 1998, IEC 60358-2004, IEC 60358 1990, IEC62146-1
1263 ELECTRICAL- CAPACITORS Coupling Capacitors. Capacitive Dividers and GradingCapacitors Tan delta test
IS 9348 1998, IEC 60358 2004,IEC 60358- 1990, IEC 62146IEC62146-1
1264 ELECTRICAL- CAPACITORS For electric fan motors Insulation Resistance test Cl.7.3-IS 1709
1265 ELECTRICAL- CAPACITORS Grading capacitorDetermination of temperatureco-efficient for capacitance -Determination of temperatureco-efficient for Tandelta
IEC 60358-1,2,3
1266 ELECTRICAL- CAPACITORS Grading capacitors Tightness test at differenttemperature Cl.8.9-IEC 62146-1
1267 ELECTRICAL- CAPACITORS Grading Capacitors for HVAC Circuit breakers Capacitance measuremt andTandelta Measurement
Cl.8.4.2&Cl.8.4.3-IEC 62146-1,Cl.8.4.7
1268 ELECTRICAL- CAPACITORS Grading Capacitors for HVAC Circuit breakers Power Frequency withstandtest Cl.8.4.7-IEC 62146-1
1269 ELECTRICAL- CAPACITORS IEEE Standard for Shunt power Capacitor Discharge resistor test Cl.7.2.4-IEEE Std.18
1270 ELECTRICAL- CAPACITORS IEEE Standard for Shunt power Capacitor Fuse capability test forInternally fused capacitors Cl.7.2.6- IEEE Std.18
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 81 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1271 ELECTRICAL- CAPACITORS IEEE Standard for Shunt power Capacitor Fuse Disconnect Test forInternally fused capacitors Cl 7.1.7-IEEE Std.18
1272 ELECTRICAL- CAPACITORS IEEE standard for shunt power capacitorLightning Voltage withstandTest between terminals andContainer
Cl.7.1.1-IEEE Std.18
1273 ELECTRICAL- CAPACITORS IEEE Standard for Shunt power Capacitor Reactive Output Test onCapacitors Cl.7.2.2-IEEE Std. 18
1274 ELECTRICAL- CAPACITORS IEEE Standard for Shunt power Capacitor Short Circuit Discharge test Cl.7.1.5-IEEE 18
1275 ELECTRICAL- CAPACITORS IEEE Standard for Shunt power Capacitor Thermal Stability Test IEEE Std. 18
1276 ELECTRICAL- CAPACITORS IEEE Std. for Shunt Power Capacitor Leak test Cl.7.2.3 of IEEE Std.18
1277 ELECTRICAL- CAPACITORS IEEE Std. for Shunt Power Capacitor Short time over voltage test Cl. 7.2.1 of IEEE Std.18
1278 ELECTRICAL- CAPACITORS Low-voltage power factor correction banks/ APFC panels forvoltage upto and including 1000 V Dielectic tests Cl.7.9-IEC 61921
1279 ELECTRICAL- CAPACITORS Low-voltage power factor correction banks/APFC panel forvoltage upto and including 1000 V Temperature rise test Cl.7.2.2-IEC 61439-2011,
Cl.7.10-IEC 61921
1280 ELECTRICAL- CAPACITORS Series capacitors for power Discharge test on Internalfuses
IS 9835(Part 3):2012, Cl.5.1.2.-IEC 60143-3
1281 ELECTRICAL- CAPACITORS Series capacitors for power systems AC voltage test betweenterminals and container
Is 9835(Part 1):2001, Cl.5.6 &5.10-IEC 60143-1
1282 ELECTRICAL- CAPACITORS Series capacitors for power systems Capacitance Measurement IS 9835 (Part 1): 2001, Cl.5.3-IEC 60143-1
1283 ELECTRICAL- CAPACITORS Series capacitors for power systems Cold duty test IEC 60143-1-2015, Cl.5.12, IS9835 (Part 1)
1284 ELECTRICAL- CAPACITORS Series capacitors for power systems Discharge current test Cl. 5.13-IEC 60143-1-2015, IS9835(Part 1)
1285 ELECTRICAL- CAPACITORS Series capacitors for power systems Disconnecting test on internalfuses
IS 9835(Part-3):2012, Cl.5.2.3-IEC 60871-3
1286 ELECTRICAL- CAPACITORS Series capacitors for power systems Endurance - Ageing Test(Special test)
IEC 60143-1 2015, Cl.5.2.4 &Cl. 2.2.4 of IS 9835 (Part 1)
1287 ELECTRICAL- CAPACITORS Series Capacitors for power systemsLightning impulse voltage testbetween terminals andcontainer
IS 9835(Part 1): 2001, IEC60143-1
1288 ELECTRICAL- CAPACITORS Series capacitors for power systems Reactive Output Test onCapacitors
IS 9835(Part 1):2001,IEC60143-1
1289 ELECTRICAL- CAPACITORS Series capacitors for power systems Sealing test IS 9835 (Part-1), Cl.5.8-IEC60143-1
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 82 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1290 ELECTRICAL- CAPACITORS Series capacitors for power systems Tan delta Measurement IS 9835 (Part 1): 2001, Cl.5.4-IEC 60143-1
1291 ELECTRICAL- CAPACITORS Series capacitors for power systems Test on Internal dischargedevice
IS 9835(Part 1):2001, Cl.5.7-IEC 60143-1
1292 ELECTRICAL- CAPACITORS Series capacitors for power systems Thermal Stability Test IS 9835(Part 1):2001, Cl.5.9-IEC 60143-1
1293 ELECTRICAL- CAPACITORS Series capacitors for power systems Voltage test after opening thecontainer Cl.5.2.4-IEC 60143-3
1294 ELECTRICAL- CAPACITORS Series capacitors for power systems Voltage test between terminals IS 9835(Part 1):2001, Cl.5.5 -IEC 60143-1
1295 ELECTRICAL- CAPACITORS Series for power system Capacitor loss measurement IS 9835(Part 1):2001, Cl.5.4-IEC 60143-1
1296 ELECTRICAL- CAPACITORS Shunt cap[acitors for AC power systems having a ratedvoltage above 1000V
Measurement of Tangent of theloss angle(Tan delta) of thecapacitor elevatedtemperature
IEC 60871-1-2014, IS13925(Part-1):2012/IEC60871-1
1297 ELECTRICAL- CAPACITORS Shunt capacitors for a.c power systems having a ratedvoltage above 1000 V Capacitance Measurement
IS 13925 (Pt 1): 2012/IEC60871-1:2005 (Cl.7) IEC60871-1: (2014-05) Ed.4.0(Cl.7) IEC TS 60871-3 :(2015-06), Ed.2.0 (Cl.7) IEC60871-4: (2014-03) Ed.2.0(Cl.5.3.2) IEEE Std.18 (Cl.7.2.2)
1298 ELECTRICAL- CAPACITORS Shunt capacitors for a.c power systems having a ratedvoltage above 1000 V
Discharge test on InternalFuses
Cl.5.1.1 & Cl.5.3-IEC60871-4-2014, IS13925(Part-4):2013/IEC60871-4
1299 ELECTRICAL- CAPACITORS Shunt capacitors for a.c power systems having a ratedvoltage above 1000 V
Disconnecting Test on internalfuses
Cl.5.1.1 & Cl.5.3-IEC 60871-4-2014,IS13925(Part-4):2013/IEC60871-1
1300 ELECTRICAL- CAPACITORS Shunt capacitors for a.c power systems having a ratedvoltage above 1000 V
Lightning Impulse Voltage Testbetween terminals andContainer
Cl.15.2-IEC 60871-1-2014,Cl.16-IS13925(Part-1):2012/IEC60871-1-2005, Cl.16-IEC60871-1
1301 ELECTRICAL- CAPACITORS Shunt capacitors for a.c power systems having a ratedvoltage above 1000 V
Measurement of tangent ofloss angle(Tan delta) of thecapacitor
IS 13925(Part 2):2002 , IEC60871-2 1999 Cl.8-IEC 60871-2
1302 ELECTRICAL- CAPACITORS Shunt capacitors for a.c power systems having a ratedvoltage above 1000 V
Over voltage test/ performancetest
Cl.16 of IEC 60871-1-2014,IEEEStd.18
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 83 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1303 ELECTRICAL- CAPACITORS Shunt capacitors for a.c power systems having a ratedvoltage above 1000 V
Reactive Output Test onCapacitors
IS 13925 (Part.1):2012/ IEC60871-1-2005, IEC60871-1-2005, IEC 60871-1
1304 ELECTRICAL- CAPACITORS Shunt capacitors for a.c power systems having a ratedvoltage above 1000 V Short Circuit Discharge test
Cl.17-IEC 60871-1-2014, IS13925-(Part 1):2012/IEC60871-1
1305 ELECTRICAL- CAPACITORS Shunt capacitors for a.c power systems having a ratedvoltage above 1000 V
Test of Internal DischargeDevice
Cl.11 of IEC 60871-1-2014, IS13925(Part-1):2012/IEC60871-1
1306 ELECTRICAL- CAPACITORS Shunt capacitors for a.c power systems having a ratedvoltage above 1000 V Thermal Stability Test IS 13925 (Pt.1): 2012 IEC
60871-1-2005,IEC 60871-1
1307 ELECTRICAL- CAPACITORS Shunt capacitors for a.c power systems having a ratedvoltage above 1000 V Voltage test between terminals
IEC 60871-1-2014,IS13925(Part-1):2012/IEC60871-1
1308 ELECTRICAL- CAPACITORS Shunt capacitors for a.c power systems having a ratedvoltage above 1000 V
Voltage test Between terminalsand Container
Cl.9-IEC 60871-1- 2014, IS13925(Part-1)/IEC60871-1-2005, IEC 60871-1
1309 ELECTRICAL- CAPACITORS Shunt capacitors for AC power systems having a ratedvoltage above 1000V
Endurance Testing- AgeingTest
IEC 60871-2-2014, IS13925(Part-2):2002/IEC60871-2
1310 ELECTRICAL- CAPACITORS Shunt Capacitors for ac power systems having a ratedvoltage above 1000V
Endurance Testing- Overvoltage cycling test
Cl.2.13- IS 13925(Part-2):/IEC60871-2
1311 ELECTRICAL- CAPACITORS Shunt capacitors for AC power Systems having a Ratedvoltage above 1000V
Measurement of Tangent ofloss angle( Tan delta) of thecapacitor
IEC 60871-1 2014, IS 13925part 1 2012, IEC 60871-1
1312 ELECTRICAL- CAPACITORS Shunt capacitors for AC power Systems having a Ratedvoltage above 1000V Sealing test
Cl.12 of IEC 60871-1-2014, IS13925(Part-1): 2012/ IEC60871-1
1313 ELECTRICAL- CAPACITORS Shunt capacitors for the self-healing type for ac powersystems having a rated voltage upto and including 1000 V
Capacitance Measurement andoutput calculation
IS 13340 (Part 1):2012,Cl.7-IEC 60831-1- 2002, IS 13340(Part 2): 2012,Cl.7- IEC60831-2 1995,Cl.7- IEC60831-1
1314 ELECTRICAL- CAPACITORS Shunt capacitors for the self-healing type for ac powersystems having a rated voltage upto and including 1000 V Destruction test
Cl. 19 of IS 13340 (Part 1):2012 / IEC 60831-1-2002, IEC60831-1&2
1315 ELECTRICAL- CAPACITORS Shunt capacitors for the self-healing type for ac powersystems having a rated voltage upto and including 1000 V Discharge test Cl.16 of IS 13340 (part 1) 2012
/ IEC 60831-1
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 84 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1316 ELECTRICAL- CAPACITORS Shunt capacitors for the self-healing type for ac powersystems having a rated voltage upto and including 1000 V
Lightning Voltage withstandTest between terminals andContainer
IS 13340 (Part 1): 2012,Cl. 15-IEC 60831-1-2002 ,Cl. 15- IEC60831-1
1317 ELECTRICAL- CAPACITORS Shunt capacitors for the self-healing type for ac powersystems having a rated voltage upto and including 1000 V
Measurement of the tangent ofthe loss angle ( tan delta) ofthe capacitor
Cl. 8 of IS 13340 (part 1) 2012/ IEC 60831-1
1318 ELECTRICAL- CAPACITORS Shunt capacitors for the self-healing type for ac powersystems having a rated voltage upto and including 1000 V
Measurement of the tangent ofthe loss angle (tan delta) of thecapacitor at elevatedtemperature
Cl. 14 of IS 13340 (part 1) 2012/ IEC 60831-1
1319 ELECTRICAL- CAPACITORS Shunt capacitors for the self-healing type for ac powersystems having a rated voltage upto and including 1000 V Sealing test Cl. 12 of IS 13340 (part 1) 2012
/ IEC 60831-1
1320 ELECTRICAL- CAPACITORS Shunt capacitors for the self-healing type for ac powersystems having a rated voltage upto and including 1000 V Self Healing Test
IS 13340 part 1 2012, IEC60831-1 2002 cl.18, IS 13340part 2 2012, IEC 60831-2 1995cl.18, IEC 60831-1 2014 cl.18,IEC 60831-2 cl.18
1321 ELECTRICAL- CAPACITORS Shunt capacitors for the self-healing type for ac powersystems having a rated voltage upto and including 1000 V Self-healing test Cl. 18 of IS 13340 (part 1) 2012
/ IEC 60831-1
1322 ELECTRICAL- CAPACITORS Shunt capacitors for the self-healing type for ac powersystems having a rated voltage upto and including 1000 V Tan delta Measurement
IS 13340 (Part 1) :2012,Cl.8-IEC 60831-2002, Cl.8-IS 13340(Part 2):2012, IEC 60831-2-1995, IEC 60831-1- 2014, Cl.8-IEC 60831-2
1323 ELECTRICAL- CAPACITORS Shunt capacitors for the self-healing type for ac powersystems having a rated voltage upto and including 1000 V
Test of the Internal DischargeDevice
Cl.11- IS 13340 (Part 1) 2012 /IEC 60831-1-2002, IEC 60831-1
1324 ELECTRICAL- CAPACITORS Shunt capacitors for the self-healing type for ac powersystems having a rated voltage upto and including 1000 V Thermal Stability test Cl. 13- IS 13340 (Part 1) 2012 /
IEC 60831-1-2002, IEC 60831-1
1325 ELECTRICAL- CAPACITORS Shunt capacitors for the self-healing type for ac powersystems having a rated voltage upto and including 1000 V Voltage test Between terminals
Cl. 9.1 & Cl. 9.2 of IS 13340(Part 1) 2012 / IEC60831-1-2002, IEC 60831-1
1326 ELECTRICAL- CAPACITORS Shunt capacitors for the self-healing type for ac powersystems having a rated voltage upto and including 1000 V
Voltage test Between terminalsand Container
Cl. 10.1 & Cl. 10.2 of IS 13340(Part 1) 2012 / IEC60831-1-2002, IEC 60831-1
1327 ELECTRICAL- CAPACITORS Shunt capacitors of non self healing type for ac powersystems having a rated voltage upto and including 1000 V
Lightning Voltage withstandTest between terminals andContainer
IS 13585 (Part 1): 2012/ Cl.15-IEC 60931-1 1996, IEC 60931-1
1328 ELECTRICAL- CAPACITORS Shunt capacitors of non self healing type for ac powersystems having a rated voltage upto and including 1000 V Ageing test
Cl.17-IEC 60931-1 1996, Cl.17-IEC 60931-2-1995, IS13585(Part 1), IS 13585(Part 2)
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 85 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1329 ELECTRICAL- CAPACITORS Shunt capacitors of non self healing type for ac powersystems having a rated voltage upto and including 1000 V Capacitance Measurement
IS 13585 (Part 1): 2012, IEC60931-1-1996 Cl.7, IEC60931-1 2011 Cl.7, IEC60931-2 2012 Cl.7.1, Cl.7.1-IEC60931-3
1330 ELECTRICAL- CAPACITORS Shunt capacitors of non self healing type for ac powersystems having a rated voltage upto and including 1000 V
Capacitance Measurement andoutput calculation
Cl. 7 of IS 13585 (part 1):2012/IEC 60931-1
1331 ELECTRICAL- CAPACITORS Shunt capacitors of non self healing type for ac powersystems having a rated voltage upto and including 1000 V
Lightning Voltage withstandTest between terminals andContainer
IS 13585 (Part 1): 2012,Cl.15,IEC 60931-1 1996, IEC 60931-1
1332 ELECTRICAL- CAPACITORS Shunt capacitors of non self healing type for ac powersystems having a rated voltage upto and including 1000 V
Reactive Output Test onCapacitors
IS 13585(Part 1): 2012/ IEC60931-1:1996, IEC 60931-1
1333 ELECTRICAL- CAPACITORS Shunt capacitors of non self healing type for ac powersystems having a rated voltage upto and including 1000 V
Short Circuit Dischargetest/Discharge test of Internalfuses/ Discharge test
Cl.5.14-IS 1569,Cl.17- IEC61048 Cl.7-IS 1709 Cl.17- IS2993 , Cl.2.16-IEC 60252-1,Cl.5.16, IEC 60252-2, IS 13585(Part 1)
1334 ELECTRICAL- CAPACITORS Shunt capacitors of non self healing type for ac powersystems having a rated voltage upto and including 1000 V Tan delta Measurement
IS 13585 (Part 1) 2012,Cl.8 -IEC 60931-1-1996, Cl.8-IEC60931-2
1335 ELECTRICAL- CAPACITORS Shunt capacitors of non self healing type for ac powersystems having a rated voltage upto and including 1000 V Thermal Stability Test
IS 13585 (Part)1:2012, Cl.13-IEC 60931-1 1996, IEC 60931-1-
1336 ELECTRICAL- CAPACITORSShunt power capacitors of non self healing type for acpower systems having a rated voltage upto and including1000 V
Destruction test Cl. 19 of 13585 (Part 1 ) : 2012/ IEC 60931-1
1337 ELECTRICAL- CAPACITORSShunt power capacitors of non self healing type for acpower systems having a rated voltage upto and including1000 V
Discharge test Cl. 16 of 13585 (Part 1 ) : 2012/ IEC 60931-1
1338 ELECTRICAL- CAPACITORSShunt power capacitors of non self healing type for acpower systems having a rated voltage upto and including1000 V
Disconnecting test on Internalfuses
Cl. 20-IS 13585-1-20012/IEC60931-1-1996, IS 13585 (Part 3) : 2013 / IEC 60931-3
1339 ELECTRICAL- CAPACITORSShunt power capacitors of non self healing type for acpower systems having a rated voltage upto and including1000 V
Measurement of the tangent ofthe loss angle ( tan delta) ofthe capacitor at elevatedtemperature
Cl. 14 of IS 13585 (Part 1 ) :2012/ IEC 60931-1
1340 ELECTRICAL- CAPACITORSShunt power capacitors of non self healing type for acpower systems having a rated voltage upto and including1000 V
Sealing test Cl. 12 of 13585 (Part 1 ) : 2012/ IEC 60931-1
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 86 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1341 ELECTRICAL- CAPACITORSShunt power capacitors of non self healing type for acpower systems having a rated voltage upto and including1000 V
Test of the Internal Dischargedevice
Cl. 11 of 13585 (Part 1 ) : 2012/ IEC 60931-1
1342 ELECTRICAL- CAPACITORSShunt power capacitors of non self healing type for acpower systems having a rated voltage upto and including1000 V
Voltage test between terminals Cl. 9.1 & Cl. 9.2 of 13585 (Part1 ) : 2012 / IEC 60931-1
1343 ELECTRICAL- CAPACITORSShunt power capacitors of non self healing type for acpower systems having a rated voltage upto and including1000 V
Voltage test between terminalsand Container
Cl. 10.1 & Cl. 10.2 of 13585(Part 1 ) : 2012 / IEC 60931-1
1344 ELECTRICAL- CAPACITORS Tubular Fluorescent, High Pressure mercury and LowPressure Sodium Vapour Discharge Lamp Circuits
Capacitance Measurement andCapacitance versustemperature
IS 1569:2006,Cl.5.8-IEC 61048-2015, Cl.6 & Cl.7-IEC 61049
1345 ELECTRICAL- CAPACITORS Tubular Fluorescent, High Pressure mercury and LowPressure Sodium Vapour Discharge Lamp Circuits Endurance test IS 1569 2006, Cl.5.13, IEC
61048 2015, Cl.6.0-IEC 61049
1346 ELECTRICAL- CAPACITORS Tubular Fluorescent, High Pressure mercury and LowPressure Sodium Vapour Discharge Lamp Circuits
High Voltage test to containeror voltage test betweenterminals and case
IS 1569 2006,Cl.5.7- IEC61048-2015,Cl.14-IEC 61049
1347 ELECTRICAL- CAPACITORS Tubular Fluorescent, High Pressure mercury and LowPressure Sodium Vapour Discharge Lamp Circuits
Robustness of termination andflexibility test
IS 1569 2006, Cl.7- IEC61048-2015, Cl.15- IEC 61049
1348 ELECTRICAL- CAPACITORS Tubular Fluorescent, High Pressure mercury and LowPressure Sodium Vapour Discharge Lamp Circuits
Robustness of termination -Soldering test
IS 1569 2006, Cl.7- IEC61048-2015, Cl.15- IEC 61049
1349 ELECTRICAL- CAPACITORS Tubular Fluorescent, High Pressure mercury and LowPressure Sodium Vapour Discharge Lamp Circuits
Sealing Test/Leakage test/Oilleakage test
IS 1569 cl.5.5 2006, IEC 61048,2015 cl.12,IEC 61049
1350 ELECTRICAL- CAPACITORS Tubular Fluorescent, High Pressure mercury and LowPressure Sodium Vapour Discharge Lamp Circuits Self Healing Test IS 1569 2006 Cl. 5.11, IEC
61048, Cl.16- IEC 61049
1351 ELECTRICAL- CAPACITORS Tubular Fluorescent, High Pressure mercury and LowPressure Sodium Vapour Discharge Lamp Circuits Tan delta Measurement IS 1569:2006, Cl.5.8-IEC
61048-2015, Cl.6-IEC 61049
1352 ELECTRICAL- CAPACITORS Tubular Fluorescent, High Pressure mercury and LowPressure Sodium Vapour Discharge Lamp Circuits
Test of Discharge device/Teston Internal discharge device
IS 1569:2006 cl.5.9, IEC 610482015-07, IEC 61049
1353 ELECTRICAL- CAPACITORS Tubular Fluorescent, High Pressure mercury and LowPressure Sodium Vapour Discharge Lamp Circuits Thermal Stability test IS 1569 2006 Cl.5.10, IEC
61048-2015, Cl.17-IEC 61049
1354 ELECTRICAL- CAPACITORS Tubular Fluorescent, High Pressure mercury and LowPressure Sodium Vapour Discharge Lamp Circuits
Voltage proof test betweenterminal to terminal
IS 1569 2006 Cl.5.6, IEC61048-2015, Cl.13- IEC 61049
1355 ELECTRICAL- CELLS &BATTERIES
General Purpose Lead-Acid Batteries (Valve-RegulatedTypes) Capacity
(Cl. 5.1 & 7.2) IEC61056-1:2012/ IS 16220 (Part1):
1356 ELECTRICAL- CELLS &BATTERIES
General Purpose Lead-Acid Batteries (Valve-RegulatedTypes)
Charge Acceptance after DeepDischarge
(Cl. 5.5 & 7.9) IEC61056-1:2012/ IS 16220 (Part1)
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 87 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1357 ELECTRICAL- CELLS &BATTERIES
General Purpose Lead-Acid Batteries (Valve-RegulatedTypes) Charge Retention
(Cl. 5.3 & 7.7) IEC61056-1:2012/ IS 16220 (Part1)
1358 ELECTRICAL- CELLS &BATTERIES
General Purpose Lead-Acid Batteries (Valve-RegulatedTypes) Construction IEC 61056-1:2012/ IS 16220
(Part 1) - (Cl. 4.1)
1359 ELECTRICAL- CELLS &BATTERIES
General Purpose Lead-Acid Batteries (Valve-RegulatedTypes) Cycle Service Endurance
(Cl. 5.2.1 & 7.4) IEC61056-1:2012/ IS 16220 (Part1)
1360 ELECTRICAL- CELLS &BATTERIES
General Purpose Lead-Acid Batteries (Valve-RegulatedTypes) Designation IEC 61056-1:2012/ IS 16220
(Part 1) - (Cl. 4.3)
1361 ELECTRICAL- CELLS &BATTERIES
General Purpose Lead-Acid Batteries (Valve-RegulatedTypes) Dimensions (Cl. 4) IEC 61056-2:2012/ IS
16220 (Part 2)
1362 ELECTRICAL- CELLS &BATTERIES
General Purpose Lead-Acid Batteries (Valve-RegulatedTypes) Float Service Endurance
(Cl. 5.2.2 & 7.5) IEC61056-1:2012/ IS 16220 (Part1)
1363 ELECTRICAL- CELLS &BATTERIES
General Purpose Lead-Acid Batteries (Valve-RegulatedTypes)
Float Service Endurance at40?C
(Cl. 7.6) IEC 61056-1:2012/ IS16220 (Part 1)
1364 ELECTRICAL- CELLS &BATTERIES
General Purpose Lead-Acid Batteries (Valve-RegulatedTypes) Gas Emission Intensity
(Cl. 5.7 & 7.10) IEC61056-1:2012/ IS 16220 (Part1)
1365 ELECTRICAL- CELLS &BATTERIES
General Purpose Lead-Acid Batteries (Valve-RegulatedTypes) High Rate Capacity
(Cl. 5.1 & 7.3) IEC61056-1:2012/ IS 16220 (Part1)
1366 ELECTRICAL- CELLS &BATTERIES
General Purpose Lead-Acid Batteries (Valve-RegulatedTypes) Marking (Cl. 6) IEC 61056-2:2012/ IS
16220 (Part 2)
1367 ELECTRICAL- CELLS &BATTERIES
General Purpose Lead-Acid Batteries (Valve-RegulatedTypes) Marking of Polarity IEC 61056-1:2012/ IS 16220
(Part 1) - (Cl. 4.4)
1368 ELECTRICAL- CELLS &BATTERIES
General Purpose Lead-Acid Batteries (Valve-RegulatedTypes) Maximum Permissible Current
(Cl. 5.4 & 7.8) IEC61056-1:2012/ IS 16220 (Part1)
1369 ELECTRICAL- CELLS &BATTERIES
General Purpose Lead-Acid Batteries (Valve-RegulatedTypes) Shock Resistant Characteristics
(Cl. 5.10 & 7.13)IEC61056-1:2012/ IS 16220 (Part1)
1370 ELECTRICAL- CELLS &BATTERIES
General Purpose Lead-Acid Batteries (Valve-RegulatedTypes) Terminals (Cl. 5) IEC 61056-2:2012/ IS
16220 (Part 2)
1371 ELECTRICAL- CELLS &BATTERIES
Indian Railway Standard Specification for Valve Regulated(Sealed) Lead Acid Stationary Battery and Charger forrailway S&T Installations
Ampere hour and watt hourefficiency tests
(Cl. A.10.7) IRS:S 93/96 withAmd. 1
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 88 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1372 ELECTRICAL- CELLS &BATTERIES
Indian Railway Standard Specification for Valve Regulated(Sealed) Lead Acid Stationary Battery and Charger forrailway S&T Installations
Endurance test (Cl. A.10.6) IRS:S 93/96 withAmd. 1
1373 ELECTRICAL- CELLS &BATTERIES
Indian Railway Standard Specification for Valve Regulated(Sealed) Lead Acid Stationary Battery and Charger forrailway S&T Installations
Test for Capacity (Cl. A.10.4) IRS:S 93/96 withAmd. 1
1374 ELECTRICAL- CELLS &BATTERIES
Indian Railway Standard Specification for Valve Regulated(Sealed) Lead Acid Stationary Battery and Charger forrailway S&T Installations
Test for Charge Retention (Cl. A.10.5) IRS:S 93/96 withAmd. 1
1375 ELECTRICAL- CELLS &BATTERIES
Indian Railway Standard Specification for Valve Regulated(Sealed) Lead Acid Stationary Battery and Charger forrailway S&T Installations
Test for Endurance under shortcircuit conditions
(Cl. A.10.9) IRS:S 93/96 withAmd. 1
1376 ELECTRICAL- CELLS &BATTERIES
Indian Railway Standard Specification for Valve Regulated(Sealed) Lead Acid Stationary Battery and Charger forrailway S&T Installations
Test for gas recombinationefficiency
(Cl. A. 10.11) IRS:S 93/96 withAmd. 1
1377 ELECTRICAL- CELLS &BATTERIES
Indian Railway Standard Specification for Valve Regulated(Sealed) Lead Acid Stationary Battery and Charger forrailway S&T Installations
Test for Voltage duringdischarge
(Cl. A.10.8) IRS:S 93/96 withAmd. 1
1378 ELECTRICAL- CELLS &BATTERIES
Indian Railway Standard Specification for Valve Regulated(Sealed) Lead Acid Stationary Battery and Charger forrailway S&T Installations
Verification for markingpacking
(Cl. A.10.3, 6 & 7) IRS:S 93/96with Amd. 1
1379 ELECTRICAL- CELLS &BATTERIES
Indian Railway Standard Specification for Valve Regulated(Sealed) Lead Acid Stationary Battery and Charger forrailway S&T Installations
Verification of constructionalrequirements
(Cl. A.10.2, A. 3.1, A. 3.2, A. 3.7& A. 3.9) IRS:S 93/96 with Amd.1
1380 ELECTRICAL- CELLS &BATTERIES Lead Acid Storage Batteries for Motor Vehicles Dimensions and Layout (Cl. 9.4 & 6) IS 7372:1995 RA
1381 ELECTRICAL- CELLS &BATTERIES Lead Acid Storage Batteries for Motor Vehicles High Rate Discharge at normal
temperature (Cl. 9.9) IS 7372:1995 RA
1382 ELECTRICAL- CELLS &BATTERIES Lead Acid Storage Batteries for Motor Vehicles Marking (Cl. 9.5 & 8) IS 7372:1995 RA
1383 ELECTRICAL- CELLS &BATTERIES Lead Acid Storage Batteries for Motor Vehicles Marking (Cl. 9.5 & 8) IS 7372:1995 RA
1384 ELECTRICAL- CELLS &BATTERIES Lead Acid Storage Batteries for Motor Vehicles Physical Examination (Cl. 9.3 & 4) IS 7372:!995 RA
1385 ELECTRICAL- CELLS &BATTERIES Lead Acid Storage Batteries for Motor Vehicles Physical Examination (Cl. 9.3 & 4) IS 7372:1995 RA
1386 ELECTRICAL- CELLS &BATTERIES Lead Acid Storage Batteries for Motor Vehicles Retention of charge test (Cl. 9.12) IS 7372:1995 RA
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 89 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1387 ELECTRICAL- CELLS &BATTERIES Lead Acid Storage Batteries for Motor Vehicles Test for Capacity (Cl. 9.7) IS 7372:1995 RA
1388 ELECTRICAL- CELLS &BATTERIES Lead-Acid Starter Batteries Capacity Test (Cl. 9.5.2) JIS D 5301
1389 ELECTRICAL- CELLS &BATTERIES Lead-Acid Starter Batteries Charge Acceptance Test (Cl. 9.5.4) JIS D 5301
1390 ELECTRICAL- CELLS &BATTERIES Lead-Acid Starter Batteries Cranking Performance Test (Cl. 9.5.3) JIS D 5301
1391 ELECTRICAL- CELLS &BATTERIES Lead-Acid Starter Batteries Endurance Test (Cl. 9.5.5) JIS D 5301
1392 ELECTRICAL- CELLS &BATTERIES Lead-Acid Starter Batteries External Dimensions (Cl. 8 & 9.5.1) JIS D 5301
1393 ELECTRICAL- CELLS &BATTERIES Lead-Acid Storage Batteries for Motor Vehicles High rate discharge at low
temperature (Cl. 9.10) IS 7372: 1995 RA
1394 ELECTRICAL- CELLS &BATTERIES Lead-Acid Storage Batteries for Motor Vehicles
High rate discharge test atnormal temperature forBatteries for Heavy DutyApplication
(Cl. 9.11) IS 7372: 1995 RA
1395 ELECTRICAL- CELLS &BATTERIES Lead-Acid Storage Batteries for Motor Vehicles High-Rate Discharge Capacity
(Dry Charged Battery) (Cl. 9.17) IS 7372: 1995 RA
1396 ELECTRICAL- CELLS &BATTERIES Lead-Acid Storage Batteries for Motor Vehicles Life test (Cl. 9.14) IS 7372: 1995 RA
1397 ELECTRICAL- CELLS &BATTERIES Lead-Acid Storage Batteries for Motor Vehicles Resistance to overcharge test (Cl. 9.13) IS 7372: 1995 RA
1398 ELECTRICAL- CELLS &BATTERIES Lead-Acid Storage Batteries for Motor Vehicles Storage (for dry charged
batteries) (Cl. 9.16) IS 7372: 1995 RA
1399 ELECTRICAL- CELLS &BATTERIES Lead-Acid Storage Batteries for Motor Vehicles Storage test (Cl. 9.15) IS 7372: 1995 RA
1400 ELECTRICAL- CELLS &BATTERIES
Lead-Acid Storage Batteries for Motor Vehicles with lightweight and high cranking performance Capacity (5-h Rate) (Cl. 9.3.4) IS 14257: 1995 RA
1401 ELECTRICAL- CELLS &BATTERIES
Lead-Acid Storage Batteries for Motor Vehicles with lightweight and high cranking performance Charge acceptance (Cl. 9.3.6) IS 14257: 1995 RA
1402 ELECTRICAL- CELLS &BATTERIES
Lead-Acid Storage Batteries for Motor Vehicles with lightweight and high cranking performance Dimensions and Layout (Cl. 9.3.2) IS 14257: 1995 RA
1403 ELECTRICAL- CELLS &BATTERIES
Lead-Acid Storage Batteries for Motor Vehicles with lightweight and high cranking performance High rate discharge (Cl. 9.3.5) IS 14257: 1995 RA
1404 ELECTRICAL- CELLS &BATTERIES
Lead-Acid Storage Batteries for Motor Vehicles with lightweight and high cranking performance Life cycle test (Cl. 9.3.7) IS 14257: 1995 RA
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 90 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1405 ELECTRICAL- CELLS &BATTERIES
Lead-Acid Storage Batteries for Motor Vehicles with lightweight and high cranking performance Life cycle test (Cl. 9.3.7) IS 14257: 1995 RA
1406 ELECTRICAL- CELLS &BATTERIES
Lead-Acid Storage Batteries for Motor Vehicles with lightweight and high cranking performance Marking (Cl. 9.3.3) IS 14257: 1995 RA
1407 ELECTRICAL- CELLS &BATTERIES
Lead-Acid Storage Batteries for Motor Vehicles with lightweight and high cranking performance Overcharge Endurance (Cl. 9.3.9) IS 14257: 1995 RA
1408 ELECTRICAL- CELLS &BATTERIES
Lead-Acid Storage Batteries for Motor Vehicles with lightweight and high cranking performance Physical Examination (Cl. 9.3.1) IS 14257: 1995 RA
1409 ELECTRICAL- CELLS &BATTERIES
Lead-Acid Storage Batteries for Motor Vehicles with lightweight and high cranking performance Robustness to fastening (Cl. 9.3.11) IS 14257: 1995 RA
1410 ELECTRICAL- CELLS &BATTERIES
Lead-Acid Storage Batteries for Motor Vehicles with lightweight and high cranking performance Strength of Terminal (Cl. 9.3.10) IS 14257: 1995 RA
1411 ELECTRICAL- CELLS &BATTERIES
Lead-Acid Storage Batteries for Motor Vehicles with lightweight and high cranking performance Test for Dry-Charged Battery (Cl. 9.3.12) IS 14257: 1995 RA
1412 ELECTRICAL- CELLS &BATTERIES Lead-Acid Traction Batteries Capacity Test (Cl. 5.2) IEC 60254-1:2005/ IS
5154 (Part 1): 2013 RA
1413 ELECTRICAL- CELLS &BATTERIES Lead-Acid Traction Batteries Charge Retention Test (Cl. 5.3) IEC 60254-1:2005/ IS
5154 (Part 1): 2013 RA
1414 ELECTRICAL- CELLS &BATTERIES Lead-Acid Traction Batteries Cyclic Endurance Test (Cl. 5.5) IEC 60254-1:2005/ IS
5154 (Part 1): 2013 RA
1415 ELECTRICAL- CELLS &BATTERIES Lead-Acid Traction Batteries High Rate Discharge
Performance(Cl. 5.4) IEC 60254-1:2005/ IS5154 (Part 1): 2013 RA
1416 ELECTRICAL- CELLS &BATTERIES
Low Maintenance Lead Acid Stationary Secondary Cells forS&T Installations
Ampere-hour and Watt-hourEfficiency Test (Cl. 7.8) IRS:S 88/
1417 ELECTRICAL- CELLS &BATTERIES
Low Maintenance Lead Acid Stationary Secondary Cells forS&T Installations Endurance Test (Cl. 7.7) IRS:S 88/
1418 ELECTRICAL- CELLS &BATTERIES
Low Maintenance Lead Acid Stationary Secondary Cells forS&T Installations Equilibrium Float Current Test (Cl. 7.13) IRS:S 88/
1419 ELECTRICAL- CELLS &BATTERIES
Low Maintenance Lead Acid Stationary Secondary Cells forS&T Installations Loss of Water Test (Cl. 7.12) IRS:S 88/
1420 ELECTRICAL- CELLS &BATTERIES
Low Maintenance Lead Acid Stationary Secondary Cells forS&T Installations Storage Test (Cl. 7.11) IRS:S 88/
1421 ELECTRICAL- CELLS &BATTERIES
Low Maintenance Lead Acid Stationary Secondary Cells forS&T Installations Sulphation Test (Cl. 7.14) IRS:S 88/
1422 ELECTRICAL- CELLS &BATTERIES
Low Maintenance Lead Acid Stationary Secondary Cells forS&T Installations Test for Capacity (Cl. 7.5) IRS:S 88/
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 91 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1423 ELECTRICAL- CELLS &BATTERIES
Low Maintenance Lead Acid Stationary Secondary Cells forS&T Installations
Test for loss of capacity onstorage (Cl. 7.6) IRS:S 88/
1424 ELECTRICAL- CELLS &BATTERIES
Low Maintenance Lead Acid Stationary Secondary Cells forS&T Installations
Test for Voltage duringDischarge (Cl. 7.9) IRS:S 88/
1425 ELECTRICAL- CELLS &BATTERIES
Low Maintenance Lead Acid Stationary Secondary Cells forS&T Installations
Verification of ConstructionalRequirements (Cl. 7.2) IRS:S 88/
1426 ELECTRICAL- CELLS &BATTERIES
Low Maintenance Lead Acid Stationary Secondary Cells forS&T Installations Verification of dimensions (Cl. 7.4) IRS:S 88/
1427 ELECTRICAL- CELLS &BATTERIES
Low Maintenance Lead Acid Stationary Secondary Cells forS&T Installations
Verification of marking andpacking (Cl. 7.3 & 4) IRS:S 88/
1428 ELECTRICAL- CELLS &BATTERIES Nickel Cadmium Batteries for Electric Locomotives Ampere-hour and watt-hour
efficiency (Cl. 8.4) IS 13315: 1992 RA
1429 ELECTRICAL- CELLS &BATTERIES Nickel Cadmium Batteries for Electric Locomotives Capacity at 10-hour rate (Cl. 8.2) IS 13315: 1992 RA
1430 ELECTRICAL- CELLS &BATTERIES Nickel Cadmium Batteries for Electric Locomotives Capacity at 5-hour rate (Cl. 8.3) IS 13315: 1992 RA
1431 ELECTRICAL- CELLS &BATTERIES Nickel Cadmium Batteries for Electric Locomotives Checking of dimensions,
marking and workmanship (Cl. 5.1 (a)) IS 13315: 1992 RA
1432 ELECTRICAL- CELLS &BATTERIES Nickel Cadmium Batteries for Electric Locomotives Endurance test/life cycle test (Cl. 8.6) IS 13315: 1992 RA
1433 ELECTRICAL- CELLS &BATTERIES Nickel Cadmium Batteries for Electric Locomotives Insulation Resistance Test (Cl. 8.7) IS 13315: 1992 RA
1434 ELECTRICAL- CELLS &BATTERIES Nickel Cadmium Batteries for Electric Locomotives Material and component
specification verification test (Cl. 5.1 (b)) IS 13315: 1992 RA
1435 ELECTRICAL- CELLS &BATTERIES Nickel Cadmium Batteries for Electric Locomotives Retention of charge test (Cl. 8.5) IS 13315: 1992 RA
1436 ELECTRICAL- CELLS &BATTERIES Nickel Cadmium Batteries for Electric Locomotives Storage test (Cl. 8.9) IS 13315: 1992 RA
1437 ELECTRICAL- CELLS &BATTERIES Photovoltaic (PV) module safety qualification Accessibility test MST 11 IS/IEC 61730-2 Cl.10.2
1438 ELECTRICAL- CELLS &BATTERIES Photovoltaic (PV) module safety qualification Accessibility test MST 11 IS/IEC 61730-2 Cl.10.9
1439 ELECTRICAL- CELLS &BATTERIES Photovoltaic (PV) module safety qualification Accessibility test MST 11 IS/IEC 61730-2 Cl.10.9
1440 ELECTRICAL- CELLS &BATTERIES Photovoltaic (PV) module safety qualification Adhesives IEC:61730-1 Cl. 5.5.4
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 92 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1441 ELECTRICAL- CELLS &BATTERIES Photovoltaic (PV) module safety qualification Adhesives IEC:61730-1 Cl. 5.5.4
1442 ELECTRICAL- CELLS &BATTERIES Photovoltaic (PV) module safety qualification Bypass diode functionality test
MST 07 IS/IEC 61730-2 Cl.10.8
1443 ELECTRICAL- CELLS &BATTERIES Photovoltaic (PV) module safety qualification Bypass diode functionality test
MST 07 IS/IEC 61730-2 Cl.10.8
1444 ELECTRICAL- CELLS &BATTERIES Photovoltaic (PV) module safety qualification Bypass diode thermal test MST
25 IS/IEC 61730-2 Cl.10.19
1445 ELECTRICAL- CELLS &BATTERIES Photovoltaic (PV) module safety qualification Bypass diode thermal test MST
25 IS/IEC 61730-2 Cl.10.19
1446 ELECTRICAL- CELLS &BATTERIES Photovoltaic (PV) module safety qualification Continuity test of equipotential
bonding MST 13 IS/IEC 61730-2 Cl.10.11
1447 ELECTRICAL- CELLS &BATTERIES Photovoltaic (PV) module safety qualification Continuity test of equipotential
bonding MST 13 IS/IEC 61730-2 Cl.10.11
1448 ELECTRICAL- CELLS &BATTERIES Photovoltaic (PV) module safety qualification Cut susceptibility test MST 12 IS/IEC 61730-2 Cl.10.10
1449 ELECTRICAL- CELLS &BATTERIES Photovoltaic (PV) module safety qualification Cut susceptibility test MST 12 IS/IEC 61730-2 Cl.10.10
1450 ELECTRICAL- CELLS &BATTERIES Photovoltaic (PV) module safety qualification Durability of markings MST 05 IS/IEC 61730-2 Cl.10.6
1451 ELECTRICAL- CELLS &BATTERIES Photovoltaic (PV) module safety qualification Hot-spot endurance test MST
22 IS/IEC 61730-2 Cl.10.16
1452 ELECTRICAL- CELLS &BATTERIES Photovoltaic (PV) module safety qualification Impulse voltage test MST 14 IS/IEC 61730-2 Cl.10.12
1453 ELECTRICAL- CELLS &BATTERIES Photovoltaic (PV) module safety qualification Insulation test MST 16 IS/IEC 61730-2 Cl.10.13
1454 ELECTRICAL- CELLS &BATTERIES Photovoltaic (PV) module safety qualification Insulation test MST 16 IS/IEC 61730-2 Cl.10.13
1455 ELECTRICAL- CELLS &BATTERIES Photovoltaic (PV) module safety qualification Insulation thickness test MST
04 IS/IEC 61730-2 Cl.10.5
1456 ELECTRICAL- CELLS &BATTERIES Photovoltaic (PV) module safety qualification Lap shear strength test MST 36 IS/IEC 61730-2 Cl.10.25
1457 ELECTRICAL- CELLS &BATTERIES Photovoltaic (PV) module safety qualification Materials creep test MST 37 IS/IEC 61730-2 Cl.10.26
1458 ELECTRICAL- CELLS &BATTERIES Photovoltaic (PV) module safety qualification Materials creep test MST 37 IS/IEC 61730-2 Cl.10.26
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 93 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1459 ELECTRICAL- CELLS &BATTERIES Photovoltaic (PV) module safety qualification Maximum power determination
MST 03 IS/IEC 61730-2 Cl.10.4
1460 ELECTRICAL- CELLS &BATTERIES Photovoltaic (PV) module safety qualification Module breakage test MST 32 IS/IEC 61730-2 Cl.10.20
1461 ELECTRICAL- CELLS &BATTERIES Photovoltaic (PV) module safety qualification Performance at STC MST 02 IS/IEC 61730-2 Cl.10.3
1462 ELECTRICAL- CELLS &BATTERIES Photovoltaic (PV) module safety qualification Performance at STC MST 02 IS/IEC 61730-2 Cl.10.3
1463 ELECTRICAL- CELLS &BATTERIES Photovoltaic (PV) module safety qualification Reverse current overload test
MST 26 IS/IEC 61730-2 Cl.10.19
1464 ELECTRICAL- CELLS &BATTERIES Photovoltaic (PV) module safety qualification Robustness of terminations
test MST 42 IS/IEC 61730-2 Cl.10.27
1465 ELECTRICAL- CELLS &BATTERIES Photovoltaic (PV) module safety qualification Screw connections test MST 33 IS/IEC 61730-2 Cl.10.22
1466 ELECTRICAL- CELLS &BATTERIES Photovoltaic (PV) module safety qualification Sharp edge test MST 06 IS/IEC 61730-2 Cl.10.7
1467 ELECTRICAL- CELLS &BATTERIES Photovoltaic (PV) module safety qualification Static mechanical load test
MST 34 IS/IEC 61730-2 Cl.10.23
1468 ELECTRICAL- CELLS &BATTERIES Photovoltaic (PV) module safety qualification Temperature test MST 21 IS/IEC 61730-2 Cl.10.15
1469 ELECTRICAL- CELLS &BATTERIES Photovoltaic (PV) module safety qualification
Thermal cycling test MST51/Humidity freeze test MST52/Damp heat test MST53/Cold conditioning MST55/Dry heat conditioning MST56
IS/IEC 61730-2 Cl.10.28,Cl.10.29, Cl.10.30, Cl.10.32,Cl.10.33
1470 ELECTRICAL- CELLS &BATTERIES Photovoltaic (PV) module safety qualification
Thermal cycling test MST51/Humidity freeze test MST52/Damp heat test MST53/Cold conditioning MST55/Dry heat conditioning MST56
IS/IEC 61730-2 Cl.10.28,Cl.10.29, Cl.10.30, Cl.10.32,Cl.10.33
1471 ELECTRICAL- CELLS &BATTERIES Photovoltaic (PV) module safety qualification UV test MST 54 IS/IEC 61730-2 Cl.10.31
1472 ELECTRICAL- CELLS &BATTERIES Photovoltaic (PV) module safety qualification Visual inspection IS/IEC 61730-2 Cl.10.2
1473 ELECTRICAL- CELLS &BATTERIES Photovoltaic (PV) module safety qualification Visual inspection IS/IEC 61730-2 Cl.10.2
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 94 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1474 ELECTRICAL- CELLS &BATTERIES Photovoltaic (PV) module safety qualification Wet leakage current test MST
17 IS/IEC 61730-2 Cl.10.14
1475 ELECTRICAL- CELLS &BATTERIES Photovoltaic (PV) module safety qualification Wet leakage current test MST
17 IS/IEC 61730-2 Cl.10.14
1476 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Crystalline Silicon Terrestrial Photovoltaic (PV)Modules Design Qualification and Type Approval (Maxpower 600 W
Maximum Power Determination IS 14286:2010 Cl.10.2:Ra2015/IEC 61215-2 (Cl 4.2)
1477 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Crystalline Silicon Terrestrial Photovoltaic (PV)Modules Design Qualification and Type Approval (Maxpower 600 W)
Bypass diode test IS 14286:2010 Cl.10.18: RA2015/ IEC 61215-2 (Cl 4.18)
1478 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Crystalline Silicon Terrestrial Photovoltaic (PV)Modules Design Qualification and Type Approval (Maxpower 600 W)
Bypass diode test IS 14286:2010 Cl.10.18:RA2015/ IEC 61215-2 (Cl 4.18)
1479 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Crystalline Silicon Terrestrial Photovoltaic (PV)Modules Design Qualification and Type Approval (Maxpower 600 W)
Hail Test IS 14286:2010 Cl.10.17:RA2015/ IEC 61215-2 (Cl 4.17)
1480 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Crystalline Silicon Terrestrial Photovoltaic (PV)Modules Design Qualification and Type Approval (Maxpower 600 W)
Hail Test IS 14286:2010 Cl.10.17:RA2015/ IEC 61215-2 (Cl 4.17)
1481 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Crystalline Silicon Terrestrial Photovoltaic (PV)Modules Design Qualification and Type Approval (Maxpower 600 W)
Hail Test IS 14286:2010 Cl.10.17:RA2015/ IEC 61215-2 (Cl 4.17)
1482 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Crystalline Silicon Terrestrial Photovoltaic (PV)Modules Design Qualification and Type Approval (Maxpower 600 W)
Hot Spot Endurance test IS 14286:2010 Cl.10.9:RA2015/ IEC 61215-2 (Cl 4.9)
1483 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Crystalline Silicon Terrestrial Photovoltaic (PV)Modules Design Qualification and Type Approval (Maxpower 600 W)
Insulation Test IS 14286:2010 Cl.10.3:RA2015/ IEC 61215-2 (Cl 4.3)
1484 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Crystalline Silicon Terrestrial Photovoltaic (PV)Modules Design Qualification and Type Approval (Maxpower 600 W)
Maximum Power Determination/ Voltage, Current and Powermeasurement Test
IS 14286:2010 Cl.10.2:RA2015/ IEC 61215-2 (Cl 4.2)
1485 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Crystalline Silicon Terrestrial Photovoltaic (PV)Modules Design Qualification and Type Approval (Maxpower 600 W)
Maximum Power Determination/ Voltage, Current and Powermeasurement Test
IS 14286:2010 Cl.10.2:RA2015/ IEC 61215-2 (Cl 4.2)
1486 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Crystalline Silicon Terrestrial Photovoltaic (PV)Modules Design Qualification and Type Approval (Maxpower 600 W)
Measurement of nominaloperating cell temperature(NOCT/ NMOT)
IS 14286:2010 Cl.10.5:RA2015/ IEC 61215-2 (Cl 4.5)
1487 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Crystalline Silicon Terrestrial Photovoltaic (PV)Modules Design Qualification and Type Approval (Maxpower 600 W)
Measurement of nominaloperating cell temperature(NOCT/NMOT)
IS 14286:2010 Cl.10.5:RA2015/ IEC 61215-2 (Cl 4.5)
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 95 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1488 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Crystalline Silicon Terrestrial Photovoltaic (PV)Modules Design Qualification and Type Approval (Maxpower 600 W)
Measurement of temperature IS 14286:2010 Cl.10.4:RA2015/ IEC 61215-2 (Cl 4.4)
1489 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Crystalline Silicon Terrestrial Photovoltaic (PV)Modules Design Qualification and Type Approval (Maxpower 600 W)
Measurement of temperaturecoefficient (2.5 M * 2M * 2M)
IS 14286:2010 Cl.10.4:RA2015/ IEC 61215-2 (Cl 4.4)
1490 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Crystalline Silicon Terrestrial Photovoltaic (PV)Modules Design Qualification and Type Approval (Maxpower 600 W)
Mechanical Load Test IS 14286:2010 Cl.10.16:RA2015/ IEC 61215-2 (Cl 4.16)
1491 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Crystalline Silicon Terrestrial Photovoltaic (PV)Modules Design Qualification and Type Approval (Maxpower 600 W)
Outdoor Exposure test IS 14286:2010 Cl.10.8:RA2015/ IEC 61215-2 (Cl 4.8)
1492 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Crystalline Silicon Terrestrial Photovoltaic (PV)Modules Design Qualification and Type Approval (Maxpower 600 W)
Performance at low irradiance IS 14286:2010 Cl.10.7:RA2015/ IEC 61215-2 (Cl 4.7)
1493 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Crystalline Silicon Terrestrial Photovoltaic (PV)Modules Design Qualification and Type Approval (Maxpower 600 W)
Performance at low irradiance IS 14286:2010 Cl.10.7:RA2015/ IEC 61215-2 (Cl 4.7)
1494 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Crystalline Silicon Terrestrial Photovoltaic (PV)Modules Design Qualification and Type Approval (Maxpower 600 W)
Performance at STC and NMOT(2.5M*2M*2M)
IS 14286:2010 Cl.10.6:RA2015/ IEC 61215-2 (Cl 4.6)
1495 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Crystalline Silicon Terrestrial Photovoltaic (PV)Modules Design Qualification and Type Approval (Maxpower 600 W)
Stabilization IEC 61215-2 (Cl 4.19)
1496 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Crystalline Silicon Terrestrial Photovoltaic (PV)Modules Design Qualification and Type Approval (Maxpower 600 W)
Visual InspectionIS 14286/IEC 61215 (ClauseNo: 10.1) IEC 61215-2 (ClauseNo:4.1)
1497 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Crystalline Silicon Terrestrial Photovoltaic (PV)Modules Design Qualification and Type Approval (Maxpower 600 W)
Wet leakage Current test IS 14286:2010 Cl.10.15:RA2015/ IEC 61215-2 (Cl 4.15)
1498 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Crystalline Silicon Terrestrial Photovoltaic (PV)Modules Design Qualification and Type Approval (Maxpower 600 W)
Wet leakage Current test IS 14286:2010 Cl.10.15:RA2015/ IEC 61215-2 (Cl 4.15)
1499 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Crystalline Silicon Terrestrial Photovoltaic (PV)Modules Design Qualification and Type Approval (Maxpower 600 W)
Wet leakage Current test IS 14286:2010 Cl.10.15:RA2015/ IEC 61215-2 (Cl 4.15)
1500 ELECTRICAL- CELLS &BATTERIES
photovoltaic Crystalline Silicon Terrestrial Photovoltaic (PV)Modules Design Qualification and Type Approval (MaxPower 600W)
Test samples, Marking anddocumentation, Pass criteria,Major visual defects, report ,modifications, test flow andprocedures
IEC 61215-1:2016 Cl.4,5,6,7,8,9,10,11
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 96 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1501 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Solar Water Pumping Testing System Part-1Centrifugal Pumps Specifications Cable Sizeing IS 17018-1 (Clause No: 7.4.6)
1502 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Solar Water Pumping Testing System Part-1Centrifugal Pumps Specifications Constructional Features IS 17018-1 (Clause No:5)
1503 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Solar Water Pumping Testing System Part-1Centrifugal Pumps Specifications Controller Marking IS 17018-1(Clause No: 13.2)
1504 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Solar Water Pumping Testing System Part-1Centrifugal Pumps Specifications DC Switch IS 17018-1(Clause No: 7.4.5)
1505 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Solar Water Pumping Testing System Part-1Centrifugal Pumps Specifications Deration Factor IS 17018-1 (Clause No: 7.5)
1506 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Solar Water Pumping Testing System Part-1Centrifugal Pumps Specifications
Guarantees And Tolerances OnSolar Photo Voltaic WaterPumping Systems Performance
IS 17018-1 (Clause No: 11)
1507 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Solar Water Pumping Testing System Part-1Centrifugal Pumps Specifications
IEC 61215 Certificate for PVModule IS 17018-1 (Clause No: 5.2.6.3)
1508 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Solar Water Pumping Testing System Part-1Centrifugal Pumps Specifications
IEC 61730-1 SafetyQualifications IS 17018-1 (Clause No: 5.2.6.4)
1509 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Solar Water Pumping Testing System Part-1Centrifugal Pumps Specifications Marking IS 17018-1 (Clause No: 13.1)
1510 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Solar Water Pumping Testing System Part-1Centrifugal Pumps Specifications
Marking And Parameters To BeDeclared By The Manufacturer IS 17018-1 (Clause No: 13)
1511 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Solar Water Pumping Testing System Part-1Centrifugal Pumps Specifications Material Of Construction (MOC IS 17018-1 (Clause No: 5.3)
1512 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Solar Water Pumping Testing System Part-1Centrifugal Pumps Specifications Minimum Water Output IS 17018-1 (Clause No: 7.1.1)
1513 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Solar Water Pumping Testing System Part-1Centrifugal Pumps Specifications Motor IS 17018-1 (Clause No: 5.2.2)
1514 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Solar Water Pumping Testing System Part-1Centrifugal Pumps Specifications Photo Voltaic (PV) Array IS 17018-1(Clause No: 5.2.6)
1515 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Solar Water Pumping Testing System Part-1Centrifugal Pumps Specifications
Photo Voltaic (PV) Module (S)Containing Mono/ MultiCrystalline Silicon Solar Cells
IS 17018-1 (Clause No: 5.2.6.2)
1516 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Solar Water Pumping Testing System Part-1Centrifugal Pumps Specifications Provision For Earthing IS 17018-1 (Clause No: 8)
1517 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Solar Water Pumping Testing System Part-1Centrifugal Pumps Specifications Pump Set IS 17018-1 (Clause No:5.2.1)
1518 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Solar Water Pumping Testing System Part-1Centrifugal Pumps Specifications PV Module Mismatch IS 17018-1 (Clause No: 5.2.6.9)
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 97 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1519 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Solar Water Pumping Testing System Part-1Centrifugal Pumps Specifications PV Module Wattage Tolerance IS 17018-1 (Clause No:
5.2.6.10)
1520 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Solar Water Pumping Testing System Part-1Centrifugal Pumps Specifications Rated Motor Voltage IS 17018-1 (Clause No: 7.3)
1521 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Solar Water Pumping Testing System Part-1Centrifugal Pumps Specifications
Ratings of Solar PV WaterPumping System IS 17018-1 (Clause No: 9)
1522 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Solar Water Pumping Testing System Part-1Centrifugal Pumps Specifications
Ratings of Solar PV WaterPumping System IS 17018-1 (Clause No: 9)
1523 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Solar Water Pumping Testing System Part-1Centrifugal Pumps Specifications Revelant Pump Standards IS 17018-1 (Clause No: 6)
1524 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Solar Water Pumping Testing System Part-1Centrifugal Pumps Specifications Shut Off Head Of The Pump set IS 17018-1 (Clause No: 7.1.2)
1525 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Solar Water Pumping Testing System Part-1Centrifugal Pumps Specifications
Solar Photo Voltaic (PV)Converter/Controller To ProtectThe Solar Powered Pump
IS 17018-1 (Clause No: 7.4.4)
1526 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Solar Water Pumping Testing System Part-1Centrifugal Pumps Specifications
Standard Efficiency & FillFactor IS 17018-1 (Clause No: 5.2.6.5)
1527 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Solar Water Pumping Testing System Part-1Centrifugal Pumps Specifications Terminal Box IS 17018-1 (Clause No: 5.2.6.6)
1528 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Solar Water Pumping Testing System Part-1Centrifugal Pumps Specifications
The Solar Photo Voltaic (PV)Converter/Controller Ip54Protection
IS 17018-1(Clause No: 7.4.3)
1529 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Solar Water Pumping Testing System Part-1Centrifugal Pumps Specifications
The Solar Photo Voltaic (PV)Converter/Controller MaximumPower Point Tracker (MPPT)Water Discharge
IS 17018-1(Clause No: 7.4.2)
1530 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Solar Water Pumping Testing System Part-1Centrifugal Pumps Specifications
The Solar Photo Voltaic (PV)Converter/Controller OverallEfficiency
IS 17018-1 (Clause No: 7.4.1)
1531 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Solar Water Pumping Testing System Part-1Centrifugal Pumps Specifications
The Solar Photo Voltaic (PV)Converter/Controller OverallEfficiency
IS 17018-1 (Clause No: 7.4.1)
1532 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Solar Water Pumping Testing System Part-1Centrifugal Pumps Specifications
Tests For Hydraulic AndElectrical Performance OfPumpset - whole dayperformance
IS 17018-1 (Clause No: 10.3)
1533 ELECTRICAL- CELLS &BATTERIES
Photovoltaic Solar Water Pumping Testing System Part-1Centrifugal Pumps Specifications
The Solar Photo Voltaic (PV)Converter/Controller OverallEfficiency
IS 17018-1(Clause No: 7.4.1)
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 98 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1534 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems Cables as per IS 694 & IS
14536
Specification for SolarPhotovoltaic Water PumpingSystems: Clause 3.6.5 MNRERef.No.41/3/2018-SPV divisiondt. July
1535 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems DC Circuit breaker as per IS/IEC
60947-2
Specification for SolarPhotovoltaic Water PumpingSystems: Clause 3.6.4 MNRERef.No.41/3/2018-SPV divisiondt. July
1536 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems Marking and Parameters
declared by the manufacturer
Specification for SolarPhotovoltaic Water PumpingSystems: Clause 7 MNRERef.No.41/3/2018-SPV divisiondt. July
1537 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems PV Module Certification as per
IS/IEC 61730 Part I and II
Specification for SolarPhotovoltaic Water PumpingSystems: Clause 3.3.3 MNRERef.No.41/3/2018-SPV divisiondt. July
1538 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems PV Module Name Plate as per
IS 14286/IEC 61215
Specification for SolarPhotovoltaic Water PumpingSystems: Clause 3.3.7 MNRERef.No.41/3/2018-SPV divisiondt. July
1539 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems
PV Module Salt Mist Corrosiontest as per IEC TS 61701 : 2011(for coastal application)
Specification for SolarPhotovoltaic Water PumpingSystems: Clause 3.3.6 MNRERef.No.41/3/2018-SPV divisiondt. July
1540 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems Controller and RMS
Specification for SolarPhotovoltaic Water PumpingSystems: Clause 3.2.3 and3.2.4 MNRE Ref.No.41/3/2018-SPV division dt. July
1541 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems Controller GSM / GPRS
Specification for SolarPhotovoltaic Water PumpingSystems: Clause 3.6.6 MNRERef.No.41/3/2018-SPV divisiondt. July
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 99 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1542 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems Controller Protections
Specification for SolarPhotovoltaic Water PumpingSystems: Clause 3.6.3 MNRERef.No.41/3/2018-SPV divisiondt. July
1543 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems Current
Drinking water Pumpingsystem (2014-15) : Clause II ofMNRE Solar Photovoltaic
1544 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems Current
Micro Pumping Systems(2016-17), Clause II &ANNEXURE - I of MNRERef.No.41/06/2015-16/PVSEDt.Jan
1545 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems Current
Specification for SolarPhotovoltaic Water PumpingSystems: Clause 4 MNRERef.No.41/3/2018-SPV divisiondt. July
1546 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems Earthing Arrangement as per IS
9283 /3043
Specification for SolarPhotovoltaic Water PumpingSystems: Clause 3.7 MNRERef.No.41/3/2018-SPV divisiondt. July
1547 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems Electronics and Protections
Drinking water Pumpingsystem (2014-15) : Clause VI ofMNRE Solar Photovoltaic
1548 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems Electronics and Protections
Micro Pumping Systems(2016-17), Clause VI of MNRERef No. 41/06/2015-16/PVSEDt.Jan
1549 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems Frequency
Drinking water Pumpingsystem (2014-15) : Clause II ofMNRE Solar Photovoltaic
1550 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems Frequency
Micro Pumping Systems(2016-17), Clause II &ANNEXURE - I of MNRE RefNo.41/06/2015-16/PVSE Dt.Jan
1551 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems Frequency
Specification for SolarPhotovoltaic Water PumpingSystems: Clause 4 MNRERef.No.41/3/2018-SPV divisiondt. July
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 100 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1552 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems Guarantee of Performance
Specification for SolarPhotovoltaic Water PumpingSystems: Clause 6 MNRERef.No.41/3/2018-SPV divisiondt. July
1553 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems Module mounting structure
Drinking water Pumpingsystem (2014-15) Annexure - Iof MNRE Solar Photovoltaic
1554 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems Module mounting structure
Micro Pumping Systems(2016-17), ANNEXURE - I ofMNRE Ref No.41/06/2015-16/PVSE Dt.Jan
1555 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems Module Mounting Structures
and Tracking System
Specification for SolarPhotovoltaic Water PumpingSystems: Clause 3.5 MNRERef.No.41/3/2018-SPV divisiondt. July
1556 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems Motor
Specification for SolarPhotovoltaic Water PumpingSystems: Clause 3.2.2 MNRERef.No.41/3/2018-SPV divisiondt. July
1557 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems Motor – Pump Set
Specification for SolarPhotovoltaic Water PumpingSystems: Clause 3.4 MNRERef.No.41/3/2018-SPV divisiondt. July
1558 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems Motor Pump Set
Drinking water Pumpingsystem (2014-15) : Clause IV ofMNRE Solar Photovoltaic
1559 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems Motor Pump Set
Micro Pumping Systems(2016-17), Clause IV of MNRERef No. 41/06/2015-16/PVSEDt.Jan
1560 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems Power
Drinking water Pumpingsystem (2014-15) : Clause II ofMNRE Solar Photovoltaic
1561 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems Power
Micro Pumping Systems(2016-17), Clause II &ANNEXURE - I of MNRE Ref No.41/06/2015-16/PVSE Dt.Jan
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 101 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1562 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems Power
Specification for SolarPhotovoltaic Water PumpingSystems: Clause 4 MNRERef.No.41/3/2018-SPV divisiondt. July
1563 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems Pump Set
Specification for SolarPhotovoltaic Water PumpingSystems: Clause 3.2.1 MNRERef.No.41/3/2018-SPV divisiondt. July
1564 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems PV Array
Drinking water Pumpingsystem (2014-15) : Clause III &Annexure - I of MNRE SolarPhotovoltaic
1565 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems PV Array capacity
Micro Pumping Systems(2016-17), Clause III &ANNEXURE - I of MNRE Ref No.41/06/2015-16/PVSE Dt.Jan
1566 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems PV Module Certification as per
IS14286/ IEC 61215
Specification for SolarPhotovoltaic Water PumpingSystems: Clause 3.3.2 MNRERef.No.41/3/2018-SPV divisiondt. July
1567 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems
PV Module PID as per IEC TS62804 -1 : 2015 (For more than600 V DC SPV array voltage)
Specification for SolarPhotovoltaic Water PumpingSystems: Clause 3.3.5 MNRERef.No.41/3/2018-SPV divisiondt. July
1568 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems PV Module to Module Wattage
Mismatch
Specification for SolarPhotovoltaic Water PumpingSystems: Clause 3.3.8 MNRERef.No.41/3/2018-SPV divisiondt. July
1569 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems Shut off head
Drinking water Pumpingsystem (2014-15) Annexure - Iof MNRE Solar Photovoltaic
1570 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems Shut off head
Micro Pumping Systems(2016-17), ANNEXURE - I ofMNRE Ref No.41/06/2015-16/PVSE Dt.Jan
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 102 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1571 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems Shut off head
Specification for SolarPhotovoltaic Water PumpingSystems: Clause 4 andAnnexure II & III MNRERef.No.41/3/2018-SPV divisiondt. July
1572 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems SPV Array
Specification for SolarPhotovoltaic Water PumpingSystems: Clause 3.3.1 MNRERef.No.41/3/2018-SPV divisiondt. July
1573 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems SPV Controller as per IP (65)
Protection
Specification for SolarPhotovoltaic Water PumpingSystems: Clause 3.6.2 MNRERef.No.41/3/2018-SPV divisiondt. July
1574 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems SPV Controller MPPT
Specification for SolarPhotovoltaic Water PumpingSystems: Clause 3.6.1 MNRERef.No.41/3/2018-SPV divisiondt. July
1575 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems SPV Module Efficiency & fill
factor
Specification for SolarPhotovoltaic Water PumpingSystems: Clause 3.3.4 MNRERef.No.41/3/2018-SPV divisiondt. July
1576 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems Total Water Output
Drinking water Pumpingsystem (2014-15) : Clause II &Annexure - I of MNRE SolarPhotovoltaic
1577 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems Total water Output
Micro Pumping Systems(2016-17), Clause II &ANNEXURE - I of MNRE Ref No.41/06/2015-16/PVSE Dt.Jan
1578 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems Total Water Output
Specification for SolarPhotovoltaic Water PumpingSystems: Clause 4 andAnnexure II & III MNRERef.No.41/3/2018-SPV divisiondt. July
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 103 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1579 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems
Variation in overall SPV arraywattage from specifiedwattage
Specification for SolarPhotovoltaic Water PumpingSystems: Clause 3.3.9 MNRERef.No.41/3/2018-SPV divisiondt. July
1580 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems Voltage
Drinking water Pumpingsystem (2014-15) : Clause II ofMNRE Solar Photovoltaic
1581 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems Voltage
Micro Pumping Systems(2016-17), Clause II &ANNEXURE - I of MNRE Ref No.41/06/2015-16/PVSE Dt.Jan
1582 ELECTRICAL- CELLS &BATTERIES Photovoltaic Solar Water Pumping Testing Systems Voltage
Specification for SolarPhotovoltaic Water PumpingSystems: Clause 4 MNRERef.No.41/3/2018-SPV divisiondt. July
1583 ELECTRICAL- CELLS &BATTERIES
Sealed Nickel-Cadmium Button Type Rechargeable SingleCells Dimensions and Weight (Cl. 9.3) IS 10893: 1984 RA
1584 ELECTRICAL- CELLS &BATTERIES
Sealed Nickel-Cadmium Button Type Rechargeable SingleCells
Discharge Performance at HighTemperature (Cl. 9.11) IS 10893: 1984 RA
1585 ELECTRICAL- CELLS &BATTERIES
Sealed Nickel-Cadmium Button Type Rechargeable SingleCells
Discharge Performance at LowTemperature (Cl. 9.10) IS 10893: 1984 RA
1586 ELECTRICAL- CELLS &BATTERIES
Sealed Nickel-Cadmium Button Type Rechargeable SingleCells Life Cycle (Cl. 9.12) IS 10893: 1984 RA
1587 ELECTRICAL- CELLS &BATTERIES
Sealed Nickel-Cadmium Button Type Rechargeable SingleCells Marking and Packing (Cl. 9.4 & 6) IS 10893: 1984 RA
1588 ELECTRICAL- CELLS &BATTERIES
Sealed Nickel-Cadmium Button Type Rechargeable SingleCells Overcharge Test (Cl. 9.8) IS 10893: 1984 RA
1589 ELECTRICAL- CELLS &BATTERIES
Sealed Nickel-Cadmium Button Type Rechargeable SingleCells Physical Examination (Cl. 9.2 & 4) IS 10893: 1984 RA
1590 ELECTRICAL- CELLS &BATTERIES
Sealed Nickel-Cadmium Button Type Rechargeable SingleCells Retention of Charge (Cl. 9.9) IS 10893: 1984 RA
1591 ELECTRICAL- CELLS &BATTERIES
Sealed Nickel-Cadmium Button Type Rechargeable SingleCells Storage Test (Cl. 9.13) IS 10893: 1984 RA
1592 ELECTRICAL- CELLS &BATTERIES
Sealed Nickel-Cadmium Button Type Rechargeable SingleCells Test for Capacity (Cl. 9.7) IS 10893: 1984 RA
1593 ELECTRICAL- CELLS &BATTERIES
Sealed Nickel-Cadmium Button Type Rechargeable SingleCells
Test for Polarity and ShortCircuit (Cl. 9.5) IS 10893: 1984 RA
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 104 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1594 ELECTRICAL- CELLS &BATTERIES
Secondary Batteries (Except Lithium) for Propulsion ofElectric Road Vehicles
Dynamic DischargePerformance Test
(Cl. 6) IEC 61982:2012/ IS13514: 2015 RA
1595 ELECTRICAL- CELLS &BATTERIES
Secondary Batteries (Except Lithium) for Propulsion ofElectric Road Vehicles Dynamic Endurance Test (Cl. 7) IEC 61982:2012/ IS
13514: 2015 RA
1596 ELECTRICAL- CELLS &BATTERIES
Secondary Batteries (Except Lithium) for Propulsion ofElectric Road Vehicles Rated Capacity Test (Cl. 5) IEC 61982:2012/ IS
13514: 2015 RA
1597 ELECTRICAL- CELLS &BATTERIES
Secondary Cells and Batteries containing alkaline or othernon-acid electrolytes – Secondary Lithium Cells andBatteries for Portable Applications
Charge (Capacity) Recoveryafter long term storage
IEC 61960:2011/ IS 16047 - (Cl.7.5)
1598 ELECTRICAL- CELLS &BATTERIES
Secondary Cells and Batteries containing alkaline or othernon-acid electrolytes – Secondary Lithium Cells andBatteries for Portable Applications
Charge (Capacity) Retentionand Recovery
IEC 61960:2011/ IS 16047 - (Cl.7.4)
1599 ELECTRICAL- CELLS &BATTERIES
Secondary Cells and Batteries containing alkaline or othernon-acid electrolytes – Secondary Lithium Cells andBatteries for Portable Applications
Discharge Performance at-20°C
IEC 61960:2011/ IS 16047 - (Cl.7.3.2)
1600 ELECTRICAL- CELLS &BATTERIES
Secondary Cells and Batteries containing alkaline or othernon-acid electrolytes – Secondary Lithium Cells andBatteries for Portable Applications
Discharge Performance at 20°C(Rated Capacity)
IEC 61960:2011/ IS 16047 - (Cl.7.3.1)
1601 ELECTRICAL- CELLS &BATTERIES
Secondary Cells and Batteries containing alkaline or othernon-acid electrolytes – Secondary Lithium Cells andBatteries for Portable Applications
Endurance in cycles IEC 61960:2011/ IS 16047 - (Cl.7.6)
1602 ELECTRICAL- CELLS &BATTERIES
Secondary Cells and Batteries containing alkaline or othernon-acid electrolytes – Secondary Lithium Cells andBatteries for Portable Applications
High Rate DischargePerformance at 20°C
IEC 61960:2011/ IS 16047 - (Cl.7.3.3)
1603 ELECTRICAL- CELLS &BATTERIES
Secondary Cells and Batteries containing alkaline or othernon-acid electrolytes – Secondary Lithium Cells andBatteries for Portable Applications
Measurement of the internald.c. resistance
IEC 61960:2011/ IS 16047 - (Cl.7.7.3)
1604 ELECTRICAL- CELLS &BATTERIES
Secondary Cells and Batteries containing alkaline or othernon-acid electrolytes – Secondary Lithium Cells andBatteries for Portable Applications (Prismatic andCylindrical Lithium Secondary Cells, and Batteries madefrom them)
Charge (Capacity) Recoveryafter long term storage
IEC 61960-3:2017/ IS 16047(Part 3) - (Cl. 7.5)
1605 ELECTRICAL- CELLS &BATTERIES
Secondary Cells and Batteries containing alkaline or othernon-acid electrolytes – Secondary Lithium Cells andBatteries for Portable Applications (Prismatic andCylindrical Lithium Secondary Cells, and Batteries madefrom them)
Charge (Capacity) Retentionand Recovery
IEC 61960-3:2017/ IS 16047(Part 3) - (Cl. 7.4)
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 105 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1606 ELECTRICAL- CELLS &BATTERIES
Secondary Cells and Batteries containing alkaline or othernon-acid electrolytes – Secondary Lithium Cells andBatteries for Portable Applications (Prismatic andCylindrical Lithium Secondary Cells, and Batteries madefrom them)
Discharge Performance at-20°C
IEC 61960-3:2017/ IS 16047(Part 3) - (Cl. 7.3.2)
1607 ELECTRICAL- CELLS &BATTERIES
Secondary Cells and Batteries containing alkaline or othernon-acid electrolytes – Secondary Lithium Cells andBatteries for Portable Applications (Prismatic andCylindrical Lithium Secondary Cells, and Batteries madefrom them)
Discharge Performance at 20°C(Rated Capacity)
IEC 61960-3:2017/ IS 16047(Part 3) - (Cl. 7.3.1)
1608 ELECTRICAL- CELLS &BATTERIES
Secondary Cells and Batteries containing alkaline or othernon-acid electrolytes – Secondary Lithium Cells andBatteries for Portable Applications (Prismatic andCylindrical Lithium Secondary Cells, and Batteries madefrom them)
Endurance in cycles IEC 61960-3:2017/ IS 16047(Part 3) - (Cl. 7.6)
1609 ELECTRICAL- CELLS &BATTERIES
Secondary Cells and Batteries containing alkaline or othernon-acid electrolytes – Secondary Lithium Cells andBatteries for Portable Applications (Prismatic andCylindrical Lithium Secondary Cells, and Batteries madefrom them)
High Rate DischargePerformance at 20°C
IEC 61960-3:2017/ IS 16047(Part 3) - (Cl. 7.3.3)
1610 ELECTRICAL- CELLS &BATTERIES
Secondary Cells and Batteries containing alkaline or othernon-acid electrolytes – Secondary Lithium Cells andBatteries for Portable Applications (Prismatic andCylindrical Lithium Secondary Cells, and Batteries madefrom them)
Marking IEC 61960-3:2017/ IS 16047(Part 3) - (Cl. 5.2)
1611 ELECTRICAL- CELLS &BATTERIES
Secondary Cells and Batteries containing alkaline or othernon-acid electrolytes – Secondary Lithium Cells andBatteries for Portable Applications (Prismatic andCylindrical Lithium Secondary Cells, and Batteries madefrom them)
Measurement of the internalDC resistance
IEC 61960-3:2017/ IS 16047(Part 3) - (Cl. 7.7.3)
1612 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes – Secondary lithium cells andbatteries for portable applications –Prismatic and cylindricallithium secondary cells, and batteries made from them
Charge (Capacity) Recoveryafter long term storage (Cl. 7.5) IEC 61960-3
1613 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes – Secondary lithium cells andbatteries for portable applications –Prismatic and cylindricallithium secondary cells, and batteries made from them
Charge (Capacity) Retentionand Recovery (Cl. 7.4) IEC 61960-3
1614 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes – Secondary lithium cells andbatteries for portable applications –Prismatic and cylindricallithium secondary cells, and batteries made from them
Charging procedure for testpurposes (Cl. 7.2) IEC 61960-3
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 106 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1615 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes – Secondary lithium cells andbatteries for portable applications –Prismatic and cylindricallithium secondary cells, and batteries made from them
Discharge Performance at-20°C (Cl. 7.3.2) IEC 61960-3
1616 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes – Secondary lithium cells andbatteries for portable applications –Prismatic and cylindricallithium secondary cells, and batteries made from them
Discharge Performance at 20°C(Rated Capacity) (Cl. 7.3.1) IEC 61960-3
1617 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes – Secondary lithium cells andbatteries for portable applications –Prismatic and cylindricallithium secondary cells, and batteries made from them
Endurance in cycles (Cl. 7.6) IEC 61960-3
1618 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes – Secondary lithium cells andbatteries for portable applications –Prismatic and cylindricallithium secondary cells, and batteries made from them
High Rate DischargePerformance at 20°C (Cl. 7.3.3) IEC 61960-3
1619 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes – Secondary lithium cells andbatteries for portable applications –Prismatic and cylindricallithium secondary cells, and batteries made from them
Marking (Cl. 5.2) IEC 61960-3
1620 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes – Secondary lithium cells andbatteries for portable applications –Prismatic and cylindricallithium secondary cells, and batteries made from them
Measurement of the internalDC resistance (Cl. 7.7.3) IEC 61960-3
1621 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes – Secondary lithium cells andbatteries for use in industrial applications
Charge (Capacity) retentionand recovery (Cl. 6.4) IEC 62620
1622 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes – Secondary lithium cells andbatteries for use in industrial applications
Charging procedure for testpurposes (Cl. 6.2) IEC 62620
1623 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes – Secondary lithium cells andbatteries for use in industrial applications
Discharge performance at+25°C (Cl. 6.3.1) IEC 62620
1624 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes – Secondary lithium cells andbatteries for use in industrial applications
Discharge performance at lowtemperature (Cl. 6.3.2) IEC 62620
1625 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes – Secondary lithium cells andbatteries for use in industrial applications
Endurance in cycles (Cl. 6.6.1) IEC 62620
1626 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes – Secondary lithium cells andbatteries for use in industrial applications
Endurance in storage atconstant voltage (permanentcharge life)
(Cl. 6.6.2) IEC 62620
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 107 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1627 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes – Secondary lithium cells andbatteries for use in industrial applications
High rate permissible current (Cl. 6.3.3) IEC 62620
1628 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes – Secondary lithium cells andbatteries for use in industrial applications
Marking and designation (Cl. 5) IEC 62620
1629 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes – Secondary lithium cells andbatteries for use in industrial applications
Measurement of internal d.c.resistance (Cl. 6.5.3) IEC 62620
1630 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- Nickel-cadmium prismatic secondarysingle cells with partial gas recombination
Cell designation (Cl. 5.1) IS 15767: 2008 RA
1631 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- Nickel-cadmium prismatic secondarysingle cells with partial gas recombination
Charge acceptance at constantvoltage (Cl. 7.5) IEC 62259:
1632 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- Nickel-cadmium prismatic secondarysingle cells with partial gas recombination
Charge acceptance at constantvoltage (Cl. 7.5) IS 15767: 2008 RA
1633 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- Nickel-cadmium prismatic secondarysingle cells with partial gas recombination
Charge retention (Cl. 7.3) IEC 62259
1634 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- Nickel-cadmium prismatic secondarysingle cells with partial gas recombination
Charge retention (Cl. 7.3) IS 15767: 2008 RA
1635 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- Nickel-cadmium prismatic secondarysingle cells with partial gas recombination
Charging procedure for testpurposes (Cl. 7.1) IEC 62259
1636 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- Nickel-cadmium prismatic secondarysingle cells with partial gas recombination
Determination of gasrecombination efficiency (Cl. 7.9) IEC 62259
1637 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- Nickel-cadmium prismatic secondarysingle cells with partial gas recombination
Determination of gasrecombination efficiency (Cl. 7.9) IS 15767: 2008 RA
1638 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- Nickel-cadmium prismatic secondarysingle cells with partial gas recombination
Discharge performance at-18°C (Cl. 7.2.3) IEC 62259
1639 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- Nickel-cadmium prismatic secondarysingle cells with partial gas recombination
Discharge performance at-18°C (Cl. 7.2.3) IS 15767: 2008 RA
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 108 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1640 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- Nickel-cadmium prismatic secondarysingle cells with partial gas recombination
Discharge performance at 20°C (cl. 7.2.1) IS 15767: 2008 RA
1641 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- Nickel-cadmium prismatic secondarysingle cells with partial gas recombination
Discharge performance at 20°C (Cl. 7.2.1) IEC 62259
1642 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- Nickel-cadmium prismatic secondarysingle cells with partial gas recombination
Discharge performance at 5°C (Cl. 7.2.2) IEC 62259
1643 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- Nickel-cadmium prismatic secondarysingle cells with partial gas recombination
Discharge performance at 5°C (Cl. 7.2.2) IS 15767: 2008 RA
1644 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- Nickel-cadmium prismatic secondarysingle cells with partial gas recombination
Electrolyte retention (Cl. 7.8) IS 15767: 2008 RA
1645 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- Nickel-cadmium prismatic secondarysingle cells with partial gas recombination
Endurance in cycles (Cl. 7.4.1) IEC 62259
1646 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- Nickel-cadmium prismatic secondarysingle cells with partial gas recombination
Endurance in cycles (Cl. 7.4.1) IS 15767: 2008 RA
1647 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- Nickel-cadmium prismatic secondarysingle cells with partial gas recombination
High rate current test (Cl. 7.2.4) IEC 62259
1648 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- Nickel-cadmium prismatic secondarysingle cells with partial gas recombination
High rate current test (Cl. 7.2.4) IS 15767: 2008 RA
1649 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- Nickel-cadmium prismatic secondarysingle cells with partial gas recombination
Marking (Cl. 5.3) IEC 62259:
1650 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- Nickel-cadmium prismatic secondarysingle cells with partial gas recombination
Marking (Cl. 5.3) IS 15767: 2008 RA
1651 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- Nickel-cadmium prismatic secondarysingle cells with partial gas recombination
Permanent charge endurance (Cl. 7.4.2) IEC 62259
1652 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- Nickel-cadmium prismatic secondarysingle cells with partial gas recombination
Permanent charge endurance (Cl. 7.4.2) IS 15767: 2008 RA
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 109 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1653 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- Nickel-cadmium prismatic secondarysingle cells with partial gas recombination
Storage (Cl. 7.10) IEC 62259
1654 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- Nickel-cadmium prismatic secondarysingle cells with partial gas recombination
Storage (Cl. 7.10) IS 15767: 2008 RA
1655 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- Nickel-cadmium prismatic secondarysingle cells with partial gas recombination
Vent operation (Cl. 7.7) IS 15767: 2008 RA
1656 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- portable sealed rechargeable singlecells – Nickel-Cadmium
Charge (capacity) retention (Cl. 7.3) IEC 61951-1:2006/ IS16048 (Part 1): 2013 RA
1657 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- portable sealed rechargeable singlecells – Nickel-Cadmium
Charge Acceptance at +55°Cfor LT, MT or HT CylindricalCells
(Cl. 7.9) IEC 61951-1:2006/ IS16048 (Part 1): 2013 RA
1658 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- portable sealed rechargeable singlecells – Nickel-Cadmium
Dimensions (Cl. 6.1) IEC 61951-1:2006/ IS16048 (Part 1): 2013 RA
1659 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- portable sealed rechargeable singlecells – Nickel-Cadmium
Discharge performance at-18°C
(Cl. 7.2.2) IEC 61951-1:2006/ IS16048 (Part 1): 2013 RA
1660 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- portable sealed rechargeable singlecells – Nickel-Cadmium
Discharge performance at 20°C (Cl. 7.2.1) IEC 61951-1:2006/ IS16048 (Part 1): 2013 RA
1661 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- portable sealed rechargeable singlecells – Nickel-Cadmium
Discharge performance forrapid charge cells (R Cells)
(Cl. 7.2.3) IEC 61951-1:2006/ IS16048 (Part 1): 2013 RA
1662 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- portable sealed rechargeable singlecells – Nickel-Cadmium
Endurance in cycles (Cl. 7.4.1) IEC 61951-1:2006/ IS16048 (Part 1): 2013 RA
1663 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- portable sealed rechargeable singlecells – Nickel-Cadmium
Marking (Cl. 5.3) IEC 61951-1:2006/ IS16048 (Part 1): 2013 RA
1664 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- portable sealed rechargeable singlecells – Nickel-Cadmium
Measurement of internal d.c.resistance
(Cl. 7.10.2) IEC 61951-1:2006/IS 16048 (Part 1): 2013 RA
1665 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- portable sealed rechargeable singlecells – Nickel-Cadmium
Overcharge (Cl. 7.6) IEC 61951-1:2006/ IS16048 (Part 1): 2013 RA
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 110 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1666 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- portable sealed rechargeable singlecells – Nickel-Cadmium
Permanent Charge Endurance (Cl. 7.4.2) IEC 61951-1:2006/ IS16048 (Part 1): 2013 RA
1667 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- portable sealed rechargeable singlecells – Nickel-Cadmium
Storage (Cl. 7.8) IEC 61951-1:2006/ IS16048 (Part 1): 2013 RA
1668 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- Vented Nickel-Cadmium PrismaticRechargeable Single Cells
Charge Acceptance atConstant Voltage (Cl. 7.6) IEC 60623
1669 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- Vented Nickel-Cadmium PrismaticRechargeable Single Cells
Charge Retention (Cl. 7.4) IEC 60623
1670 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- Vented Nickel-Cadmium PrismaticRechargeable Single Cells
Discharge Performance at+5°C (Cl. 7.3.3) IEC 60623
1671 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- Vented Nickel-Cadmium PrismaticRechargeable Single Cells
Discharge Performance at-18°C (Cl. 7.3.4) IEC 60623
1672 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- Vented Nickel-Cadmium PrismaticRechargeable Single Cells
Discharge Performance at 20°C (Cl. 7.3.2) IEC 60623
1673 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- Vented Nickel-Cadmium PrismaticRechargeable Single Cells
Discharge Performance at HighTemperature (Cl. 7.3.6) IEC 60623
1674 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- Vented Nickel-Cadmium PrismaticRechargeable Single Cells
Discharge Performance at LowTemperature (Cl. 7.3.5) IEC 60623
1675 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- Vented Nickel-Cadmium PrismaticRechargeable Single Cells
Endurance in Cycles (Cl. 7.5.2) IEC 60623
1676 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- Vented Nickel-Cadmium PrismaticRechargeable Single Cells
High Rate Current Test (Cl. 7.3.7) IEC 60623
1677 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- Vented Nickel-Cadmium PrismaticRechargeable Single Cells
Marking (Cl. 5.4) IEC 60623:
1678 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes- Vented Nickel-Cadmium PrismaticRechargeable Single Cells
Storage (Cl. 7.9) IEC 60623
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 111 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1679 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes-portable sealed rechargeable singlecells - Nickel-Metal Hydride
Charge (capacity) retention IEC 61951-2:2011/ IS 16048(Part 2) - Cl. 7.4
1680 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes-portable sealed rechargeable singlecells - Nickel-Metal Hydride
Charge Acceptance at +55°Cfor LT, MT or HT CylindricalCells
IEC 61951-2:2011/ IS 16048(Part 2) - (Cl. 7.11)
1681 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes-portable sealed rechargeable singlecells - Nickel-Metal Hydride
Dimensions IEC 61951-2:2011/ IS 16048(Part 2) - Cl. 6
1682 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes-portable sealed rechargeable singlecells - Nickel-Metal Hydride
Discharge performance at 0°C IEC 61951-2:2011/ IS 16048(Part 2) - Cl. 7.2.2
1683 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes-portable sealed rechargeable singlecells - Nickel-Metal Hydride
Discharge performance at 20°C IEC 61951-2:2011/ IS 16048(Part 2) - Cl. 7.3.2
1684 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes-portable sealed rechargeable singlecells - Nickel-Metal Hydride
Discharge performance forrapid charge cells (R Cells)
IEC 61951-2:2011/ IS 16048(Part 2) - Cl. 7.3.4
1685 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes-portable sealed rechargeable singlecells - Nickel-Metal Hydride
Endurance in cycles IEC 61951-2:2011/ IS 16048(Part 2) - Cl. 7.5.1
1686 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes-portable sealed rechargeable singlecells - Nickel-Metal Hydride
Marking Cl. 5.3 - IEC 61951-2:2011/ IS16048 (Part 2)
1687 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes-portable sealed rechargeable singlecells - Nickel-Metal Hydride
Measurement of internal d.c.resistance
IEC 61951-2:2011/ IS 16048(Part 2) - (Cl. 7.12.3)
1688 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes-portable sealed rechargeable singlecells - Nickel-Metal Hydride
Overcharge IEC 61951-2:2011/ IS 16048(Part 2) - Cl. 7.7
1689 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes-portable sealed rechargeable singlecells - Nickel-Metal Hydride
Permanent Charge Endurance IEC 61951-2:2011/ IS 16048(Part 2) - Cl. 7.5.2
1690 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries containing alkaline or othernon-acid electrolytes-portable sealed rechargeable singlecells - Nickel-Metal Hydride
Storage IEC 61951-2:2011/ IS 16048(Part 2) - Cl. 7.10
1691 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries for photovoltaic energysystems (PVES)- (Photovoltaic off-grid application) Capacity Test (Cl. 8.1 & 7.2) IEC 61427-1
1692 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries for photovoltaic energysystems (PVES)- (Photovoltaic off-grid application) Charge Efficiency (Cl. 5.2) IEC 61427-1
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 112 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1693 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries for photovoltaic energysystems (PVES)- (Photovoltaic off-grid application) Charge Efficiency (Cl. 5.2) IEC 61427-1
1694 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries for photovoltaic energysystems (PVES)- (Photovoltaic off-grid application) Charge Retention Test (Cl. 8.3 & 7.2) IEC 61427-1
1695 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries for photovoltaic energysystems (PVES)- (Photovoltaic off-grid application) Charge Retention Test (Cl. 8.3 & 7.2) IEC 61427-1
1696 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries for photovoltaic energysystems (PVES)- (Photovoltaic off-grid application)
Cycling Endurance Test inPhotovoltaic Application(Extreme Conditions)
(Cl. 8.4) IEC 61427-1
1697 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries for photovoltaic energysystems (PVES)- (Photovoltaic off-grid application) Generic cycling Endurance Test (Cl. 8.2 & 7.2) IEC 61427-1
1698 ELECTRICAL- CELLS &BATTERIES
Secondary cells and batteries for photovoltaic energysystems (PVES)- (Photovoltaic off-grid application) Marking (Cl. 5.4) IEC 61427-1
1699 ELECTRICAL- CELLS &BATTERIES
Secondary Cells and Batteries for Solar PhotovoltaicApplications Capacity Test (Cl. 8.1 & 7.2) IS 16270
1700 ELECTRICAL- CELLS &BATTERIES
Secondary Cells and Batteries for Solar PhotovoltaicApplications Capacity Test (Cl. 8.1 & 7.2) IS 16270
1701 ELECTRICAL- CELLS &BATTERIES
Secondary Cells and Batteries for Solar PhotovoltaicApplications Charge Retention Test (Cl. 8.3 & 7.2) IS 16270
1702 ELECTRICAL- CELLS &BATTERIES
Secondary Cells and Batteries for Solar PhotovoltaicApplications Charge Retention Test (Cl. 8.3 & 7.2) IS 16270
1703 ELECTRICAL- CELLS &BATTERIES
Secondary Cells and Batteries for Solar PhotovoltaicApplications
Cyclic Endurance inPhotovoltaic Application(Extreme Conditions)
(Cl. 8.4) IS 16270
1704 ELECTRICAL- CELLS &BATTERIES
Secondary Cells and Batteries for Solar PhotovoltaicApplications Endurance Test (Cl. 8.2 & 7.2) IS 16270
1705 ELECTRICAL- CELLS &BATTERIES
Secondary Cells and Batteries for Solar PhotovoltaicApplications Endurance Test (Cl. 8.2 & 7.2) IS 16270
1706 ELECTRICAL- CELLS &BATTERIES
Secondary Cells and Batteries for Solar PhotovoltaicApplications Marking (Cl. 5.4) IS 16270
1707 ELECTRICAL- CELLS &BATTERIES
Secondary Cells and Batteries for Solar PhotovoltaicApplications Marking (Cl. 5.4) IS 16270
1708 ELECTRICAL- CELLS &BATTERIES
Secondary Cells and Batteries for Solar PhotovoltaicApplications
Non Spillability/ Semi NonSpillability/ Splash Proof Test (Cl. 8.7) IS 16270
1709 ELECTRICAL- CELLS &BATTERIES
Secondary Cells and Batteries for Solar PhotovoltaicApplications
Non Spillability/ Semi NonSpillability/ Splash Proof Test (Cl. 8.7) IS 16270
1710 ELECTRICAL- CELLS &BATTERIES
Secondary Cells and Batteries for Solar PhotovoltaicApplications
Sulphation Test (Applicable forLead Acid Batteries Only) (Cl. 8.5) IS 16270
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 113 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1711 ELECTRICAL- CELLS &BATTERIES
Secondary Cells and Batteries for Solar PhotovoltaicApplications
Water Loss Test (Valid forFlooded Lead Acid BatteriesOnly)
(Cl. 8.6) IS 16270
1712 ELECTRICAL- CELLS &BATTERIES Small-sized valve regulated lead acid batteries Capacity (Cl. 7.1 & 5.1) JIS C 8702-1
1713 ELECTRICAL- CELLS &BATTERIES Small-sized valve regulated lead acid batteries
Charge acceptancecharacteristics after deepdischarge
(Cl. 7.6 & 5.6) JIS C 8702-1
1714 ELECTRICAL- CELLS &BATTERIES Small-sized valve regulated lead acid batteries Cycle service endurance (Cl. 7.3 & 5.3) JIS C 8702-1
1715 ELECTRICAL- CELLS &BATTERIES Small-sized valve regulated lead acid batteries Endurance in trickle application (Cl. 7.7 & 5.7) JIS C 8702-1
1716 ELECTRICAL- CELLS &BATTERIES Small-sized valve regulated lead acid batteries Endurance in trickle application
at 40°C (Cl. 7.8 & 5.8) JIS C 8702-1
1717 ELECTRICAL- CELLS &BATTERIES Small-sized valve regulated lead acid batteries Gas emission intensity (Cl. 7.9 & 5.9) JIS C 8702-1
1718 ELECTRICAL- CELLS &BATTERIES Small-sized valve regulated lead acid batteries Gas recombinating
characteristics CL.7.10 & 5.10 JIS C 8702-1
1719 ELECTRICAL- CELLS &BATTERIES Small-sized valve regulated lead acid batteries High Rate Discharge
Characteristics (Cl.7.2 & 5.2) JIS C 8702-1
1720 ELECTRICAL- CELLS &BATTERIES Small-sized valve regulated lead acid batteries Marking items, Marking of
polarity (Cl. 4.3 & 4.4) JIS C 8702-1
1721 ELECTRICAL- CELLS &BATTERIES Small-sized valve regulated lead acid batteries Maximum permissible current (Cl.7.5 & 5.5) JIS C 8702-1
1722 ELECTRICAL- CELLS &BATTERIES Small-sized valve regulated lead acid batteries Shock Resistance
Characteristics CL.7.12 & 5.12 JIS C 8702-1
1723 ELECTRICAL- CELLS &BATTERIES Small-sized valve regulated lead acid batteries Storage Characteristics (Cl. 7.4 & 5.4) JIS C 8702-1
1724 ELECTRICAL- CELLS &BATTERIES Solar Photovoltaic modules
Measurement of PhotovoltaicCurrent- VoltageCharacteristics
IS 12762-Part 1
1725 ELECTRICAL- CELLS &BATTERIES
Stationary Cells and Batteries, Lead Acid Type (WithTubular Positive Plates)
Alternative Rates of TestDischarges (Cl. 12.6) IS 1651: 2013 RA
1726 ELECTRICAL- CELLS &BATTERIES
Stationary Cells and Batteries, Lead Acid Type (WithTubular Positive Plates)
Ampere-hour and Watt-hourefficiency tests (Cl. 12.9) IS 1651:2013 RA
1727 ELECTRICAL- CELLS &BATTERIES
Stationary Cells and Batteries, Lead Acid Type (WithTubular Positive Plates) Endurance Test (Cl. 12.8) IS 1651: 2013 RA
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 114 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1728 ELECTRICAL- CELLS &BATTERIES
Stationary Cells and Batteries, Lead Acid Type (WithTubular Positive Plates) Loss of capacity on storage (Cl. 12.7) IS 1651:2013 RA
1729 ELECTRICAL- CELLS &BATTERIES
Stationary Cells and Batteries, Lead Acid Type (WithTubular Positive Plates)
Short Circuit and InternalResistance Test (Cl. 12.13) IS 1651: 2013 RA
1730 ELECTRICAL- CELLS &BATTERIES
Stationary Cells and Batteries, Lead Acid Type (WithTubular Positive Plates) Test for capacity (Cl. 12.5) IS 1651:2013 RA
1731 ELECTRICAL- CELLS &BATTERIES
Stationary Cells and Batteries, Lead Acid Type (WithTubular Positive Plates)
Test for Suitability of FloatingBattery Operation (Cl. 12.12) IS 1651: 2013 RA
1732 ELECTRICAL- CELLS &BATTERIES
Stationary Cells and Batteries, Lead Acid Type (WithTubular Positive Plates)
Test for voltage duringdischarge (Cl. 12.10) IS 1651:2013 RA
1733 ELECTRICAL- CELLS &BATTERIES
Stationary Cells and Batteries, Lead Acid Type (WithTubular Positive Plates) Verifcation of dimensions (Cl. 12.4, 7.1 & 7.2) IS
1651:2013 RA
1734 ELECTRICAL- CELLS &BATTERIES
Stationary Cells and Batteries, Lead Acid Type (WithTubular Positive Plates)
Verification of constructionalrequirements (Cl. 12.2 & 6) IS 1651:2013 RA
1735 ELECTRICAL- CELLS &BATTERIES
Stationary Cells and Batteries, Lead Acid Type (WithTubular Positive Plates) Verification of marking (Cl. 12.3 & 8) IS 1651:2013 RA
1736 ELECTRICAL- CELLS &BATTERIES
Stationary Cells and Batteries, Lead Acid Type (WithTubular Positive Plates) Water Loss Test (Cl. 12.11) IS 1651: 2013 RA
1737 ELECTRICAL- CELLS &BATTERIES
Stationary cells and Batteries, Lead-Acid type (With Tubularpositive Plates)
Ampere-hour and watt-hourefficiency tests CL.11.8 IS: 13369: 1992 RA
1738 ELECTRICAL- CELLS &BATTERIES
Stationary cells and Batteries, Lead-Acid type (With Tubularpositive Plates) ENDURANCE TEST CL.11.7 IS: 13369: 1992 RA
1739 ELECTRICAL- CELLS &BATTERIES
Stationary cells and Batteries, Lead-Acid type (With Tubularpositive Plates)
EQUILIBRIUM FLOAT CURRENTTEST CL.11.10 IS: 13369: 1992 RA
1740 ELECTRICAL- CELLS &BATTERIES
Stationary cells and Batteries, Lead-Acid type (With Tubularpositive Plates) Test for capacity CL.11.5 IS: 13369: 1992 RA
1741 ELECTRICAL- CELLS &BATTERIES
Stationary cells and Batteries, Lead-Acid type (With Tubularpositive Plates)
Test for loss of capacity onstorage/ Retention of charge CL.11.6 IS: 13369: 1992 RA
1742 ELECTRICAL- CELLS &BATTERIES
Stationary cells and Batteries, Lead-Acid type (With Tubularpositive Plates)
Verification of constructionalrequirements CL.11.2 & 6 IS: 13369: 1992 RA
1743 ELECTRICAL- CELLS &BATTERIES
Stationary cells and Batteries, Lead-Acid type (With Tubularpositive Plates) Verification of dimensions CL.11.4 &7.1 IS: 13369: 1992
RA
1744 ELECTRICAL- CELLS &BATTERIES
Stationary cells and Batteries, Lead-Acid type (With Tubularpositive Plates)
Verification of marking andpacking CL.11.3 & 8 IS: 13369: 1992 RA
1745 ELECTRICAL- CELLS &BATTERIES
Stationary cells and Batteries, Lead-Acid type (With Tubularpositive Plates) WATER LOSS TEST CL.11.9 IS: 13369: 1992 RA
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 115 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1746 ELECTRICAL- CELLS &BATTERIES
Stationary cells and Batteries, Lead-Acid type With Plantepositive Plates
ALTERNATE RATED TESTDISCHARGE CL.10.7 IS: 1652: 2013 RA
1747 ELECTRICAL- CELLS &BATTERIES
Stationary cells and Batteries, Lead-Acid type With Plantepositive Plates
Ampere-hour and watt-hourefficiency tests CL.10.10 IS: 1652: 2013 RA
1748 ELECTRICAL- CELLS &BATTERIES
Stationary cells and Batteries, Lead-Acid type With Plantepositive Plates ENDURANCE TEST CL.10.9 IS: 1652: 2013 RA
1749 ELECTRICAL- CELLS &BATTERIES
Stationary cells and Batteries, Lead-Acid type With Plantepositive Plates LOSS OF WATER TEST CL.10.12 IS: 1652: 2013 RA
1750 ELECTRICAL- CELLS &BATTERIES
Stationary cells and Batteries, Lead-Acid type With Plantepositive Plates
SHORT CIRCUIT CURRENT ANDINTERNAL RESISTANCE TEST CL.10.14 IS: 1652: 2013 RA
1751 ELECTRICAL- CELLS &BATTERIES
Stationary cells and Batteries, Lead-Acid type With Plantepositive Plates Test for capacity CL.10.6 IS: 1652: 2013 RA
1752 ELECTRICAL- CELLS &BATTERIES
Stationary cells and Batteries, Lead-Acid type With Plantepositive Plates
Test for loss of capacity onstorage CL.10.8 IS: 1652: 2013 RA
1753 ELECTRICAL- CELLS &BATTERIES
Stationary cells and Batteries, Lead-Acid type With Plantepositive Plates
Test for voltage duringdischarge CL.10.11 IS: 1652: 2013 RA
1754 ELECTRICAL- CELLS &BATTERIES
Stationary cells and Batteries, Lead-Acid type With Plantepositive Plates
TEST OF SUITABILITY OFFLOATING BATTERYOPERATION
CL.10.13 IS: 1652: 2013 RA
1755 ELECTRICAL- CELLS &BATTERIES
Stationary cells and Batteries, Lead-Acid type With Plantepositive Plates
Verification of constructionalrequirements
CL.10.4.1a& 5 IS: 1652: 2013RA
1756 ELECTRICAL- CELLS &BATTERIES
Stationary cells and Batteries, Lead-Acid type With Plantepositive Plates Verification of dimensions CL.10.4.1c & 6.1 IS: 1652:
2013 RA
1757 ELECTRICAL- CELLS &BATTERIES
Stationary cells and Batteries, Lead-Acid type With Plantepositive Plates Verification of marking CL.10.4.1b & 7 IS: 1652: 2013
RA
1758 ELECTRICAL- CELLS &BATTERIES Stationary lead-acid batteries – Vented Types Capacity Test (Cl. 7 & 14) IEC 60896-11
1759 ELECTRICAL- CELLS &BATTERIES Stationary lead-acid batteries – Vented Types Cell and battery markings (Cl. 21) IEC 60896-11
1760 ELECTRICAL- CELLS &BATTERIES Stationary lead-acid batteries – Vented Types Charge Retention test (Cl. 10 & 18) IEC 60896-11
1761 ELECTRICAL- CELLS &BATTERIES Stationary lead-acid batteries – Vented Types Endurance in discharge-charge
cycles (Cl. 9.1 & 16) IEC 60896-11
1762 ELECTRICAL- CELLS &BATTERIES Stationary lead-acid batteries – Vented Types Endurance in overcharge (Cl. 9.2 & 17) IEC 60896-11
1763 ELECTRICAL- CELLS &BATTERIES Stationary lead-acid batteries – Vented Types Marking of polarity (Cl. 24) IEC 60896-11
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 116 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1764 ELECTRICAL- CELLS &BATTERIES Stationary lead-acid batteries – Vented Types
Short-circuit current andinternal resistancedetermination
(Cl. 11 & 19) IEC 60896-11
1765 ELECTRICAL- CELLS &BATTERIES Stationary lead-acid batteries – Vented Types Test of suitability for floating
battery operation (Cl. 8 & 15) IEC 60896-11
1766 ELECTRICAL- CELLS &BATTERIES Stationary lead-acid batteries: Valve regulated types Abusive over-discharge (Cl. 6.17) IEC 60896-21
1767 ELECTRICAL- CELLS &BATTERIES Stationary lead-acid batteries: Valve regulated types Charge retention during
storage (Cl. 6.12) IEC 60896-21
1768 ELECTRICAL- CELLS &BATTERIES Stationary lead-acid batteries: Valve regulated types Content and durability of
required marking (Cl. 6.6) IEC 60896-21
1769 ELECTRICAL- CELLS &BATTERIES Stationary lead-acid batteries: Valve regulated types Discharge capacity (Cl. 6.11) IEC 60896-21
1770 ELECTRICAL- CELLS &BATTERIES Stationary lead-acid batteries: Valve regulated types Float service with daily
discharges (Cl. 6.13) IEC 60896-21
1771 ELECTRICAL- CELLS &BATTERIES Stationary lead-acid batteries: Valve regulated types Gas emission CL.6.1 IEC 60896-21
1772 ELECTRICAL- CELLS &BATTERIES Stationary lead-acid batteries: Valve regulated types High current tolerance (Cl. 6.2) IEC 60896-21
1773 ELECTRICAL- CELLS &BATTERIES Stationary lead-acid batteries: Valve regulated types Recharge behaviour (Cl. 6.14) IEC 60896-21
1774 ELECTRICAL- CELLS &BATTERIES Stationary lead-acid batteries: Valve regulated types Service life at an operating
temperature of 40°C (Cl. 6.15) IEC 60896-21
1775 ELECTRICAL- CELLS &BATTERIES Stationary lead-acid batteries: Valve regulated types Short-circuit current and d.c.
internal resistance (Cl. 6.3) IEC 60896-21
1776 ELECTRICAL- CELLS &BATTERIES Stationary Valve Regulated Lead Acid Batteries Voltage during C10 Discharge
test (Cl. 12.1.1) IS 15549:2005 RA
1777 ELECTRICAL- CELLS &BATTERIES Stationary Valve regulated Lead-Acid Batteries AMPERE HOUR EFFICIENCY CL.12.4 IS 15549: 2005 RA
1778 ELECTRICAL- CELLS &BATTERIES Stationary Valve regulated Lead-Acid Batteries Capacity test at other
discharge rates (Cl. 12.3) IS 15549: 2005 RA
1779 ELECTRICAL- CELLS &BATTERIES Stationary Valve regulated Lead-Acid Batteries CHECKING DIMENSIONS AS PER
MANUFACTURER'S DRAWINGCL.10.1.1 (b) IS 15549: 2005RA
1780 ELECTRICAL- CELLS &BATTERIES Stationary Valve regulated Lead-Acid Batteries Endurance Life Cycle Test (Cl. 12.10) IS 15549: 2005 RA
1781 ELECTRICAL- CELLS &BATTERIES Stationary Valve regulated Lead-Acid Batteries Test for C1 Capacity (Cl.12.2) IS 15549: 2005 RA
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 117 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1782 ELECTRICAL- CELLS &BATTERIES Stationary Valve regulated Lead-Acid Batteries Test for C10 Capacity CL.12.1 IS 15549: 2005 RA
1783 ELECTRICAL- CELLS &BATTERIES Stationary Valve regulated Lead-Acid Batteries Test for Oxygen Recombination
Efficiency (Cl. 12.9) IS 15549: 2005 RA
1784 ELECTRICAL- CELLS &BATTERIES Stationary Valve regulated Lead-Acid Batteries TEST FOR RETENTION OF
CHARGE CL.12.6 IS 15549: 2005 RA
1785 ELECTRICAL- CELLS &BATTERIES Stationary Valve regulated Lead-Acid Batteries Test on separators (Cl. 12.7) IS 15549: 2005 RA
1786 ELECTRICAL- CELLS &BATTERIES Stationary Valve regulated Lead-Acid Batteries VISUAL EXAMINATION CL.10.1.1 (a), 4.1 to 4.9 and
8.1 IS 15549: 2005 RA
1787 ELECTRICAL- CELLS &BATTERIES Stationary Valve regulated Lead-Acid Batteries WATT HOUR EFFICIENCY CL.12.5 IS 15549: 2005 RA
1788 ELECTRICAL- CELLS &BATTERIES Universal Solar Pump Controller (USPC) Circuit Power Factor
As per MNRE specificationClause 2.VI As per Annexure-IIIof Circular Ref.No.41/3/2018-SPV Division dated July
1789 ELECTRICAL- CELLS &BATTERIES Universal Solar Pump Controller (USPC) Controller
As per MNREspecificationTechnicalspecification for stand aloneapplication Cl.2 .III As perAnnexure-III of CircularRef.No.41/3/2018-SPV Divisiondated July
1790 ELECTRICAL- CELLS &BATTERIES Universal Solar Pump Controller (USPC) Controller to operate motorized
farm equipment
As per MNREspecificationTechnicalspecification for stand aloneapplication Cl.2 .VII.2 As perAnnexure-III of Circular No.Ref.No.41/3/2018-SPV Divisiondated July
1791 ELECTRICAL- CELLS &BATTERIES Universal Solar Pump Controller (USPC) Current
As per MNRE specificationClause 2.VI As per Annexure-IIIof Circular Ref.No.41/3/2018-SPV Division dated July
1792 ELECTRICAL- CELLS &BATTERIES Universal Solar Pump Controller (USPC) Desire motor operation
As per MNRE specificationTechnical specification forstand alone application Cl.2 .IAs per Annexure-III of CircularRef.No.41/3/2018-SPV Divisiondated July
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 118 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1793 ELECTRICAL- CELLS &BATTERIES Universal Solar Pump Controller (USPC) Efficiency
As per MNREspecificationTechnicalspecification for stand aloneapplication Cl.2 .VII.6 As perAnnexure-III of CircularRef.No.41/3/2018-SPV Divisiondated July
1794 ELECTRICAL- CELLS &BATTERIES Universal Solar Pump Controller (USPC) Electrical properties
As per MNRE specificationTechnical specification forstand alone application Cl.2 .IIAs per Annexure-III of CircularRef.No.41/3/2018-SPV Divisiondated July
1795 ELECTRICAL- CELLS &BATTERIES Universal Solar Pump Controller (USPC) Frequency
As per MNRE specificationClause 2.I As per Annexure-IIIof Circular Ref.No.41/3/2018-SPV Division dated July
1796 ELECTRICAL- CELLS &BATTERIES Universal Solar Pump Controller (USPC) Harmonics
As per MNRE specificationClause 2.II As per Annexure-IIIof Circular Ref.No.41/3/2018-SPV Division dated July
1797 ELECTRICAL- CELLS &BATTERIES Universal Solar Pump Controller (USPC) Mode operation
As per MNRE specificationTechnical specification forstand alone application Cl.2.VII.3 As per Annexure-III ofCircular Ref.No.41/3/2018-SPVDivision dated July
1798 ELECTRICAL- CELLS &BATTERIES Universal Solar Pump Controller (USPC) MPPT efficiency
As per MNRE specificationTechnical specification forstand alone application Cl.2 .IVAs per Annexure-III of CircularRef.No.41/3/2018-SPV Divisiondated July
1799 ELECTRICAL- CELLS &BATTERIES Universal Solar Pump Controller (USPC) Number of 3-phase output
power cables
As per MNRE specificationTechnical specification forstand alone application Cl.2 .VIAs per Annexure-III of CircularRef.No.41/3/2018-SPV Divisiondated July
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 119 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1800 ELECTRICAL- CELLS &BATTERIES Universal Solar Pump Controller (USPC) Off-grid Solar pump controller
As per MNRE specificationTechnical specification forstand alone application Cl.2.VII.1 As per Annexure-III ofCircular Ref.No.41/3/2018-SPVDivision dated July
1801 ELECTRICAL- CELLS &BATTERIES Universal Solar Pump Controller (USPC) Remote monitoing & remot
fault identification
As per MNRE specificationTechnical specification forstand alone application Cl.2 .VIIAs per Annexure-III of CircularRef.No.41/3/2018-SPV Divisiondated July
1802 ELECTRICAL- CELLS &BATTERIES Universal Solar Pump Controller (USPC) Timer
As per MNRE specificationClause 2.VI As per Annexure-IIIof Circular Ref.No.41/3/2018-SPV Division dated July
1803 ELECTRICAL- CELLS &BATTERIES Universal Solar Pump Controller (USPC) Total Circuit Power
As per MNRE specificationClause 2.III and Clause 2.VI Asper Annexure-III of CircularRef.No.41/3/2018-SPV Divisiondated July
1804 ELECTRICAL- CELLS &BATTERIES Universal Solar Pump Controller (USPC) Voltage
As per MNRE specificationClause 2.I and Clause 2.VI Asper Annexure-III of CircularRef.No.41/3/2018-SPV Divisiondated July
1805 ELECTRICAL- CELLS &BATTERIES Vented Type Nickel Cadmium Batteries Ampere-Hour and Watt-Hour
Efficiency Tests (Cl. 10.13) IS 10918: 1984 RA
1806 ELECTRICAL- CELLS &BATTERIES Vented Type Nickel Cadmium Batteries Ampere-hour Capacity (Cl. 10.7) IS 10918: 1984 RA
1807 ELECTRICAL- CELLS &BATTERIES Vented Type Nickel Cadmium Batteries Dimensions, Mass and Layout (Cl. 10.3) IS 10918: 1984 RA
1808 ELECTRICAL- CELLS &BATTERIES Vented Type Nickel Cadmium Batteries Discharge Performance at Low
Temperature (Cl. 10.9) IS 10918: 1984 RA
1809 ELECTRICAL- CELLS &BATTERIES Vented Type Nickel Cadmium Batteries Insulation Resistance Test (Cl. 10.11) IS 10918: 1984 RA
1810 ELECTRICAL- CELLS &BATTERIES Vented Type Nickel Cadmium Batteries Life Cycle Test (Cl. 10.10) IS 10918: 1984 RA
1811 ELECTRICAL- CELLS &BATTERIES Vented Type Nickel Cadmium Batteries Marking (Cl. 10.4, 4 & 6) IS 10918: 1984
RA
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 120 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1812 ELECTRICAL- CELLS &BATTERIES Vented Type Nickel Cadmium Batteries Physical Examination (Cl. 10.2 & 3) IS 10918: 1984
RA
1813 ELECTRICAL- CELLS &BATTERIES Vented Type Nickel Cadmium Batteries Polarity (Cl. 10.5) IS 10918: 1984 RA
1814 ELECTRICAL- CELLS &BATTERIES Vented Type Nickel Cadmium Batteries Retention of Charge (Cl. 10.8) IS 10918: 1984 RA
1815 ELECTRICAL- CELLS &BATTERIES Vented Type Nickel Cadmium Batteries Storage Test (Cl. 10.12) IS 10918: 1984 RA
1816 ELECTRICAL- DOMESTICELECTRICAL APPLIANCES Direct cool Refrigerator Energy consumption (Cl. 14.9) IS: 1476(Part 1)-
2000 RA
1817 ELECTRICAL- DOMESTICELECTRICAL APPLIANCES Direct cool Refrigerator Ice-Making test (Cl. 14.6) IS: 1476(Part 1) :
2000 RA
1818 ELECTRICAL- DOMESTICELECTRICAL APPLIANCES Direct cool Refrigerator Pull down Test Cl. 14.5 IS 1476 PART(1) 2000
RA
1819 ELECTRICAL- DOMESTICELECTRICAL APPLIANCES Direct cool Refrigerator Rated Gross and Storage
Volume(Cl. 8.0) IS: 1476(Part 1) -2000RA
1820 ELECTRICAL- DOMESTICELECTRICAL APPLIANCES Frost free Refrigerator Energy consumption (Cl. 14) IS:15750: 2006 RA
1821 ELECTRICAL- DOMESTICELECTRICAL APPLIANCES Frost free Refrigerator Ice making test (Cl. 17.0) IS:15750: 2006 RA
1822 ELECTRICAL- DOMESTICELECTRICAL APPLIANCES Frost free Refrigerator Pull down Test (Cl. 16) IS:15750: 2006 RA
1823 ELECTRICAL- DOMESTICELECTRICAL APPLIANCES Frost free Refrigerator Rated Gross and Storage
Volume (Cl. 5.0) IS:15750: 2006 RA
1824 ELECTRICAL- DOMESTICELECTRICAL APPLIANCES Split Type Air Conditioner Capacity Rating Test (Cl.9.9) IS 1391 (Part 2)
1825 ELECTRICAL- DOMESTICELECTRICAL APPLIANCES Split Type Air Conditioner Maximum Operating Conditions
Test (Cl.9. 4)IS 1391 (Part 2)
1826 ELECTRICAL- DOMESTICELECTRICAL APPLIANCES Split Type Air Conditioner Power Consumption Test for
Cooling (Cl.9.7) (Cl.9.7) IS 1391 (Part 2)
1827 ELECTRICAL- DOMESTICELECTRICAL APPLIANCES Window/ Unitary type Air Conditioner Capacity Rating Test (Cl.10.10) IS 1391 (Part 1)
1828 ELECTRICAL- DOMESTICELECTRICAL APPLIANCES Window/ Unitary type Air Conditioner Maximum Operating Conditions
Test (Cl.10.4) IS 1391 (Part 1)
1829 ELECTRICAL- DOMESTICELECTRICAL APPLIANCES Window/ Unitary type Air Conditioner Power Consumption Test for
Cooling (Cl.10.8) IS 1391 (Part 1)
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 121 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1830ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
Data Exchange for Electricity Meter Reading, Tariff andLoad Control – Companion Specification - IS 15959 (Part 1):2011
Conformance testIS / IEC 62056 (DLMS/ COSEM)Parts 21, 42, 46, 47, 53, 61 and62
1831ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
Metering Equipment- General Requirements Static paymentmeters for active energy ( Classes 1 & 2) Impulse Voltage test
IEC: 62052-11; 2003, Amd1,cl.7.3.2 IEC: 62055-31 :2005,Amd1 cl.7.7 IEC 62052-31
1832ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
Static meters for active energy (Classes 1 & 2) Staticmeters for active energy (Classes 0.2S & 0.5S) Staticmeters for reactive energy(Classes 2 & 3) Static meters forreactive energy at fundamental frequency ( Classes 0.5 S ,1 S & 1) Static payment meters for active energy ( Classes1 & 2)
Sub harmonics in ac currentcircuit
IEC: 62052-11: 2003,Amd1 IEC:62053-21: 2003,Amd1 cl.8.2IEC: 62053-22: 2003,Amdcl.8.2 IEC: 62053-24:2014,Amd1 IEC: 62055-31:,Amd1 cl.8
1833ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
a.c Static Direct Connected Watthour Smart Meter Class 1and Class 2 - Specification
Smart Meter FunctionalRequirements Clause 11 of IS 16444 (Part 1))
1834ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
a.c Static Direct Connected Watthour Smart Meter Class 1and Class 2 - Specification
Test for Data ExchangeProtocol Clause 10.5 of 16444 (Part 1)
1835ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
a.c Static Direct Connected Watthour Smart Meter Class 1and Class 2 - Specification
Test for Smart MeterCommunicability Clause 10.6 IS 16444 (Part 1)
1836ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
a.c Static Transformer Operated Watthour and Var - HourSmart Meters, 0.2S, 0.5S and 1.0S Part 2 SpecificationTransformer Operated Smart Meters
Smart Meter FunctionalRequirements Clause 10 of IS 16444 (Part 2)
1837ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
a.c Static Transformer Operated Watthour and Var - HourSmart Meters, 0.2S, 0.5S and 1.0S Part 2 SpecificationTransformer Operated Smart Meters
Test for Data ExchangeProtocol Clause 9.4 of IS 16444 (Part 2)
1838ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
a.c Static Transformer Operated Watthour and Var - HourSmart Meters, 0.2S, 0.5S and 1.0S Part 2 SpecificationTransformer Operated Smart Meters
Test for Smart MeterCommunicability Clause 9.5 of IS 16444 (Part 2)
1839ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
a.c.Static Direct Connected Watthour Smart MeterClass 1 &2 a.c.Static Transformer operated Watthour and Var – HourSmart Meters Class 0.2S,0.5S and 1.0S CBIP guide on StaticEnergy meter- No.325
Insulation Resistance testIS 16444(Part 1):2015 , Amd1cl.6.10.6, IS 16444(Part2):2017 cl.6.10.6 CBIPPublication No: 325: cl.5.4.6.4
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 122 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1840ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC Static Watthour Meters Class 1 and 2 AC staticTransformer operated Watthour and VAR- Hour Meters,Class 0.2S, 0.5S & 1.0S
Abnormal a.c magneticinduction of externalorigin(0.2T)
CBIP manual 304:
1841ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC Static Watthour Meters Class 1 and 2 AC staticTransformer operated Watthour and VAR- Hour Meters,Class 0.2S, 0.5S & 1.0S AC direct connected Staticprepayment Meters for Active Energy Class 1 and 2a.c.Static Direct Connected Watthour Smart MeterClass 1 &2 a.c.Static Transformer operated Watthour and Var – HourSmart Meters Class 0.2S,0.5S and 1.0S AC watthourmeters,class 0.5,1 & 2 CBIP guide on Static Energy meter-No.325
Test of Repeatability of error
IS 13010: 2002, Amd1& Amd2cl.11.19 IS 13779:1999cl.12.17,Amd1 to 5 IS14697: 1999cl.12.16, Amd 1 to4 IS 15884 :2010cl.5.6.7 IS16444(Part 1):2015cl.6.12,Amd1 IS 16444(Part2):2017 cl.6.12 CBIPPublication No: 325: cl.5.6.9
1842ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC Static Watthour Meters Class 1 and 2 AC staticTransformer operated Watthour and VAR- Hour Meters,Class 0.2S, 0.5S & 1.0S AC direct connected Staticprepayment Meters for Active Energy Class 1 and 2a.c.Static Direct Connected Watthour Smart MeterClass 1 &2 a.c.Static Transformer operated Watthour and Var – HourSmart Meters Class 0.2S,0.5S and 1.0S AC watthourmeters,class 0.5,1 & 2 Electromechanical meters for activeenergy ( Classes 0.5,1 & 2) Static meters for active energy(Classes 1 & 2) Static meters for active energy (Classes0.2S & 0.5S) Static meters for reactive energy(Classes 2 &3) Static meters for reactive energy at fundamentalfrequency ( Classes 0.5 S , 1 S & 1) Static payment metersfor active energy ( Classes 1 & 2) CBIP guide on StaticEnergy meter- No.325
Power consumption test /Power loss
IS 13010: 2002, Amd1& Amd2cl.11.8 IS13779:1999cl.12.7.1,Amd1 to5 IS 14697:1999,Amd 1 to 4cl.12.7.1 IEC: 62052-11:2003,Amd1 IEC: 62053-11:2003,Amd1 cl.7.1 IEC:62053-21: 2003,Amd1 cl.7.1IEC: 62053-22: 2003, Amd1cl.7.1 IEC: 62053-23:2003,Amd1 cl.7.1 IEC:62053-24 :2014,Amd1 cl.7.2IEC: 62055-31 :2005,Amd1cl.7.3 CBIP Publication No:325:2015 cl.5.4.1 IS 15884:2010cl.5.4.1 IS 16444(Part1):2015 cl.6.10.1,Amd1 IS16444(Part 2): cl.6.10.1
1843ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC Static Watthour Meters Class 1 and 2 AC staticTransformer operated Watthour and VAR- Hour Meters,Class 0.2S, 0.5S & 1.0S AC direct connected Staticprepayment Meters for Active Energy Class 1 and 2a.c.Static Direct Connected Watthour Smart MeterClass 1 &2 a.c.Static Transformer operated Watthour and Var – HourSmart Meters Class 0.2S,0.5S and 1.0S AC watthourmeters,class 0.5,1 & 2 AC Static Watthour Meters Class 1and 2 AC static Transformer operated Watthour and VAR-Hour Meters, Class 0.2S, 0.5S & 1.0S AC direct connectedStatic prepayment Meters for Active Energy Class 1 and 2a.c.Static Direct Connected Watthour Smart MeterClass 1 &2 a.c.Static Transformer operated Watthour and Var – HourSmart Meters Class 0.2S,0.5S and 1.0S AC watthourmeters,class 0.5,1 & 2
Impulse Voltage test
IS 13010: 2002, Amd1& Amd2cl.11.10.2 IS13779:1999 Amd1to 5 cl.12.7.6.2 IS 14697:1999Amd 1 to 4 cl.12.7.6.2, IS15884 :2010,cl.5.4.6.2 IS16444(Part 1):2015,cl.6.10.6,Amd1 IS 16444(Part2):2017 cl.6.10.6 CBIPPublication No: 325:2015cl.5.4.6.2
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 123 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1844ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC Static Watthour Meters Class 1 and 2 AC staticTransformer operated Watthour and VAR- Hour Meters,Class 0.2S, 0.5S & 1.0S AC direct connected Staticprepayment Meters for Active Energy Class 1 and 2a.c.Static Direct Connected Watthour Smart MeterClass 1 &2 a.c.Static Transformer operated Watthour and Var – HourSmart Meters Class 0.2S,0.5S and 1.0S AC watthourmeters,class 0.5,1 & 2 CBIP guide on Static Energy meter-No.325
Abnormal a.c magneticinduction of externalorigin(10mT)
IS 13779: 1999 cl.12.11,Amd1to 5 IS 14697: 1999 cl.12.10,Amd 1 to 4, CBIP PublicationNo: 325:2015 cl.5.6.2,4.6.3 IS15884 :2010cl.4.6.2 IS16444(Part 1):2015cl.6.12,Amd1 IS 16444(Part 2):cl.6.12
1845ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC Static Watthour Meters Class 1 and 2 AC staticTransformer operated Watthour and VAR- Hour Meters,Class 0.2S, 0.5S & 1.0S AC direct connected Staticprepayment Meters for Active Energy Class 1 and 2a.c.Static Direct Connected Watthour Smart MeterClass 1 &2 a.c.Static Transformer operated Watthour and Var – HourSmart Meters Class 0.2S,0.5S and 1.0S AC watthourmeters,class 0.5,1 & 2 Metering EquipmentElectromechanical meters for active energy ( Classes 0.5,1& 2) Static meters for active energy (Classes 1 & 2) Staticmeters for active energy (Classes 0.2S & 0.5S) Staticmeters for reactive energy(Classes 2 & 3) Static meters forreactive energy at fundamental frequency ( Classes 0.5 S ,1 S & 1) Static payment meters for active energy ( Classes1 & 2) CBIP guide on Static Energy meter- No.325
Interpretation of Test results
IS 13010: 2002, Amd1&Amd2cl.11.7 IS 13779:1999cl.12.16,Amd1 to 5 IS14697: 1999 Amd 1 to 4cl.12.15, IEC: 62052-11,2003,Amd1 IEC: 62053-11,2003, Amd1cl.8.6 IEC:62053-21 ,2003 Amd 1 cl.8.6,IEC: 62053-22, 2003,Amd1cl.8.6,Amd1 IEC: 62053-23,2003,cl.8.6,Amd1 IEC:62053-24 ,2014,Amd1cl.8.7IEC: 62055-31 ,2005,Amd1cl.8CBIP Publication No: 325:2015IS 15884 :2010,cl.5.6.6 IS16444(Part 1):2015cl.6.12,Amd:1 IS 16444(Part 2):cl.6.12
1846ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC Static Watthour Meters Class 1 and 2 AC staticTransformer operated Watthour and VAR- Hour Meters,Class 0.2S, 0.5S & 1.0S AC direct connected Staticprepayment Meters for Active Energy Class 1 and 2a.c.Static Direct Connected Watthour Smart MeterClass 1 &2 a.c.Static Transformer operated Watthour and Var – HourSmart Meters Class 0.2S,0.5S and 1.0S AC watthourmeters,class 0.5,1 & 2 Metering EquipmentElectromechanical meters for active energy ( Classes 0.5,1& 2) Static meters for active energy (Classes 1 & 2) Staticmeters for active energy (Classes 0.2S & 0.5S) Staticmeters for reactive energy(Classes 2 & 3) Static meters forreactive energy at fundamental frequency ( Classes 0.5 S ,1 S & 1) Static payment meters for active energy ( Classes1 & 2) CBIP guide on Static Energy meter- No.325
Test of ambient temperatureinfluence / Limits of error dueto Ambient temperatureVariation
IS 13010: 2002, Amd1&Amd2cl.11.11 IS 13779:1999cl.12.12,Amd1 to 5 IS14697:1999 ,cl.12.11,Amd: 1to 4 IEC: 62052-11, 2003,Amd1IEC: 62053-11,2003,Amd1cl.8.2 IEC:62053-21, 2003,cl.8.2,Amd1IEC: 62053-22,2003,cl.8.2,Amd1 IEC:62053-23 ,2003,cl.8.2,Amd1IEC: 62053-24,2014,Amd1cl.8.3 IEC:62055-31 ,2005,Amd1cl.8 CBIPPublication No: 325:2015cl.5.6.3 IS 15884 :2010cl.4.6.3IS 16444(Part 1):2015cl.6.12,Amd1 IS 16444(Part 2):cl.6.12
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 124 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1847ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC Static Watthour Meters Class 1 and 2 AC staticTransformer operated Watthour and VAR- Hour Meters,Class 0.2S, 0.5S & 1.0S AC direct connected Staticprepayment Meters for Active Energy Class 1 and 2a.c.Static Direct Connected Watthour Smart MeterClass 1 &2 a.c.Static Transformer operated Watthour and Var – HourSmart Meters Class 0.2S,0.5S and 1.0S AC watthourmeters,class 0.5,1 & 2 Metering EquipmentElectromechanical meters for active energy ( Classes 0.5,1& 2) Static meters for active energy (Classes 1 & 2) Staticmeters for active energy (Classes 0.2S & 0.5S) Staticmeters for reactive energy(Classes 2 & 3) Static meters forreactive energy at fundamental frequency ( Classes 0.5 S ,1 S & 1) Static payment meters for active energy ( Classes1 & 2) CBIP guide on Static Energy meter- No.325
Test of Meter constant
IS 13010: 2002, Amd1&Amd2cl.11.6 IS 13779:1999cl.12.15, Amd1 to 5 IS14697: 1999 ,cl.12.14, Amd 1to4 IEC: 62052-11, 2003,Amd1IEC: 62053-11,2003,Amd1cl.8.4 IEC:62053-21cl.8.4, 2003,Amd1IEC: 62053-22,2003,cl.8.4,Amd1 IEC:62053-23 ,2003,Amd1cl.8.4IEC: 62053-24,2014,Amd1cl.8.5 IEC:62055-31 ,2005,Amd1cl.8 CBIPPublication No:325:2015cl.5.6.6 IS 15884:2010cl.5.6.5 IS 16444(Part1):2015 cl.6.12,Amd1 IS16444(Part 2): cl.6.12
1848ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC Static Watthour Meters Class 1 and 2 AC staticTransformer operated Watthour and VAR- Hour Meters,Class 0.2S, 0.5S & 1.0S AC direct connected Staticprepayment Meters for Active Energy Class 1 and 2a.c.Static Direct Connected Watthour Smart MeterClass 1 &2 a.c.Static Transformer operated Watthour and Var – HourSmart Meters Class 0.2S,0.5S and 1.0S AC watthourmeters,class 0.5,1 & 2 Metering EquipmentElectromechanical meters for active energy ( Classes 0.5,1& 2) Static meters for active energy (Classes 1 & 2) Staticmeters for active energy (Classes 0.2S & 0.5S) Staticmeters for reactive energy(Classes 2 & 3) Static meters forreactive energy at fundamental frequency ( Classes 0.5 S ,1 S & 1) Static payment meters for active energy ( Classes1 & 2) CBIP guide on Static Energy meter- No.325
General & constructionalrequirements / Generalrequirements
IS 13010: 2002, Amd1& Amd2 ,cl5.0,6.0,7.0, IS 13779:1999,Amd1 to 5 cl.6.0 IS14697: 1999,Amd1 to 4 cl.5.0to 6.0 IEC: 62052-11:2003,Amd1 cl 5.3 to 5.7,IEC:62053-11: 2003,Amd1 IEC:62053-21: 2003,Amd1 IEC:62053-22: 2003,Amd1 IEC:62053-23 :2003,Amd1 IEC:62053-24 :2014,Amd1 cl.5 IEC:62055-31 :2005,Amd1 CBIPPublication No:325:2015,Cl.4.1,4.2, IS 15884:2010,cl.4.0, 4.1,4.2,4.3 IS16444(Part 1):2015 Amd1cl.6.0, 10.3, IS 16444(Part 2):Cl.6.0, 9.3
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 125 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1849ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC Static Watthour Meters Class 1 and 2 AC staticTransformer operated Watthour and VAR- Hour Meters,Class 0.2S, 0.5S & 1.0S AC direct connected Staticprepayment Meters for Active Energy Class 1 and 2a.c.Static Direct Connected Watthour Smart MeterClass 1 &2 a.c.Static Transformer operated Watthour and Var – HourSmart Meters Class 0.2S,0.5S and 1.0S AC watthourmeters,class 0.5,1 & 2 Metering EquipmentElectromechanical meters for active energy ( Classes 0.5,1& 2) Static meters for active energy (Classes 1 & 2) Staticmeters for active energy (Classes 0.2S & 0.5S) Staticmeters for reactive energy(Classes 2 & 3) Static meters forreactive energy at fundamental frequency ( Classes 0.5 S ,1 S & 1) Static payment meters for active energy ( Classes1 & 2) CBIP guide on Static Energy meter- No.325
Influence of Heating
IS 13010: 2002, Amd1& Amd2cl.11.9 IS 13779: 1999,Amd1 to5 cl.12.7.5 IS 14697:1999,Amd:1 to 4 cl.12.7.5 IEC:62052-11, 2003, Amd1 cl.7.2IEC: 62053-11, 2003,Amd1 IEC:62053-24 ,2014,Amd1 IEC:62055-31 ,2005,Amd1 cl.7.5CBIP Publication No: 325:2015cl.5.4.5 IS 15884 :2010,cl.5.4.5IS 16444(Part 1):2015,Amd1cl.6.10.5 IS 16444(Part 2):cl.6.10.5
1850ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC Static Watthour Meters Class 1 and 2 AC staticTransformer operated Watthour and VAR- Hour Meters,Class 0.2S, 0.5S & 1.0S AC direct connected Staticprepayment Meters for Active Energy Class 1 and 2a.c.Static Direct Connected Watthour Smart MeterClass 1 &2 a.c.Static Transformer operated Watthour and Var – HourSmart Meters Class 0.2S,0.5S and 1.0S AC watthourmeters,class 0.5,1 & 2 Metering EquipmentElectromechanical meters for active energy ( Classes 0.5,1& 2) Static meters for active energy (Classes 1 & 2) Staticmeters for active energy (Classes 0.2S & 0.5S) Staticmeters for reactive energy(Classes 2 & 3) Static meters forreactive energy at fundamental frequency ( Classes 0.5 S ,1 S & 1) Static payment meters for active energy ( Classes1 & 2) CBIP guide on Static Energy meter- No.325
Influence of self heating
IS 13010: 2002, Amd1& Amd2cl.11.13 IS 13779: 1999,Amd1to 5 cl.12.7.4 IS 14697:1999,Amd:1 to 4 cl.12.7.4 IEC:62052-11: 2003,Amd1 IEC:62053-11: 2003,Amd1 IEC:62053-21: 2003, Amd1 cl.7.3IEC: 62053-22: 2003, Amd1cl.7.3, IEC 62053-23:2003,cl.7.3, IEC: 62053-24:2014,Amd1 cl.7.4 IEC:62055-31 :2005,Amd1 cl.7.6CBIP Publication No: 325:2015cl.5.4.4 IS 15884 :2010 cl.5.4.4IS 16444(Part 1):2015,Amd1cl.6.10.4 IS 16444(Part 2):cl.6.10.4
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 126 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1851ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC Static Watthour Meters Class 1 and 2 AC staticTransformer operated Watthour and VAR- Hour Meters,Class 0.2S, 0.5S & 1.0S AC direct connected Staticprepayment Meters for Active Energy Class 1 and 2a.c.Static Direct Connected Watthour Smart MeterClass 1 &2 a.c.Static Transformer operated Watthour and Var – HourSmart Meters Class 0.2S,0.5S and 1.0S AC watthourmeters,class 0.5,1 & 2 Metering EquipmentElectromechanical meters for active energy ( Classes 0.5,1& 2) Static meters for active energy (Classes 1 & 2) Staticmeters for active energy (Classes 0.2S & 0.5S) Staticmeters for reactive energy(Classes 2 & 3) Static meters forreactive energy at fundamental frequency ( Classes 0.5 S ,1 S & 1) Static payment meters for active energy ( Classes1 & 2) CBIP guide on Static Energy meter- No.325
Magnetic induction of externalorigin (0.5mT)
IS 13010: 2002, Amd1& Amd2cl.11.11 IS 13779:1999, Amd 1to 5 cl.12.11 IS 14697:1999cl.12.10,Amd:1 to 4 IEC:62052-11: 2003,Amd1 IEC:62053-11: 2003,Amd1 IEC:62053-21: 2003,Amd1 cl.8.2IEC: 62053-22:2003,Amd1cl.8.2 IEC: 62053-23:2003,Amd1 cl.8.2 IEC:62053-24 :2014,Amd1 cl.8.3IEC: 62055-31 :2005,Amd1 cl.8CBIP Publication No: 325:2015cl.5.6.2,4.6.3 IS 15884:2010cl.4.6.2 IS 16444(Part1):2015 ,Amd1 cl.6.12 IS16444(Part 2): cl.6.12
1852ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC Static Watthour Meters Class 1 and 2 AC staticTransformer operated Watthour and VAR- Hour Meters,Class 0.2S, 0.5S & 1.0S AC direct connected Staticprepayment Meters for Active Energy Class 1 and 2a.c.Static Direct Connected Watthour Smart MeterClass 1 &2 a.c.Static Transformer operated Watthour and Var – HourSmart Meters Class 0.2S,0.5S and 1.0S AC watthourmeters,class 0.5,1 & 2 Metering EquipmentElectromechanical meters for active energy ( Classes 0.5,1& 2) Static meters for active energy (Classes 1 & 2) Staticmeters for active energy (Classes 0.2S & 0.5S) Staticmeters for reactive energy(Classes 2 & 3) Static meters forreactive energy at fundamental frequency ( Classes 0.5 S ,1 S & 1) Static payment meters for active energy ( Classes1 & 2) CBIP guide on Static Energy meter- No.325
Marking of meters a)Nameplate b)Connection diagrams &terminal marking
IS 13010: 2002, Amd1& Amd2,cl.8,9, IS 13779: 1999,Amd1 to5 cl.7.0 IS 14697: 1999 , Amd 1to4 cl.7.0 IEC: 62052-11: 2003,Amd1 cl.5.10 to 5.12 IEC:62053-11: 2003,Amd1 IEC:62053-21: 2003,Amd1 IEC:62053-22: 2003,Amd1 IEC:62053-23 :2003,Amd1 IEC:62053-24 :2014,Amd1 IEC:62055-31 :2005,Amd1 CBIPPublication No:325:2015,cl.4.2.2.11, IS 15884:2010,cl.4.2.11 IS 16444(Part1):2015,Amd1 cl.6.8 IS16444(Part 2): , cl 6.8
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 127 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1853ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC Static Watthour Meters Class 1 and 2 AC staticTransformer operated Watthour and VAR- Hour Meters,Class 0.2S, 0.5S & 1.0S AC direct connected Staticprepayment Meters for Active Energy Class 1 and 2a.c.Static Direct Connected Watthour Smart MeterClass 1 &2 a.c.Static Transformer operated Watthour and Var – HourSmart Meters Class 0.2S,0.5S and 1.0S AC watthourmeters,class 0.5,1 & 2 Metering EquipmentElectromechanical meters for active energy ( Classes 0.5,1& 2) Static meters for active energy (Classes 1 & 2) Staticmeters for active energy (Classes 0.2S & 0.5S) Staticmeters for reactive energy(Classes 2 & 3) Static meters forreactive energy at fundamental frequency ( Classes 0.5 S ,1 S & 1) Static payment meters for active energy ( Classes1 & 2) CBIP guide on Static Energy meter- No.325
Short time overcurrent TestEffect of Short timeovercurrent
IS 13010:2002 , Amd1& Amd2cl.11.12 IS 13779:1999, Amd1to 5 cl.12.7.3 IS 14697: 1999,Amd:1 to 4 cl.12.7.3 IEC:62053-11: 2003,Amd1 cl.7.2IEC: 62053-21: 2003,cl.7.2,Amd1 IEC: 62053-22:2003,cl.7.2, Amd1 IEC:62053-23 :2003,cl.7.2, Amd1IEC: 62053-24 :2014,Amd1cl.7.3 IEC: 62055-31:2005,Amd1 CBIP PublicationNo: 325:2015 cl.5.4.3 IS 15884:2010cl.5.4.3 IS 16444(Part1):2015 cl.6.10.3,Amd1 ,Cl.6.10.3 of IS 16444(Part 2):
1854ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC Static Watthour Meters Class 1 and 2 AC staticTransformer operated Watthour and VAR- Hour Meters,Class 0.2S, 0.5S & 1.0S AC direct connected Staticprepayment Meters for Active Energy Class 1 and 2a.c.Static Direct Connected Watthour Smart MeterClass 1 &2 a.c.Static Transformer operated Watthour and Var – HourSmart Meters Class 0.2S,0.5S and 1.0S AC watthourmeters,class 0.5,1 & 2 Metering EquipmentElectromechanical meters for active energy ( Classes 0.5,1& 2) Static meters for active energy (Classes 1 & 2) Staticmeters for active energy (Classes 0.2S & 0.5S) Staticmeters for reactive energy(Classes 2 & 3) Static meters forreactive energy at fundamental frequency ( Classes 0.5 S ,1 S & 1) Static payment meters for active energy ( Classes1 & 2) CBIP guide on Static Energy meter- No.325
Spring Hammertest/Mechanical test of metercase
IS 13010: 2002, Amd1& Amd2IS 13779: 1999, Amd1 to 5cl.12.3.3 IS 14697: 1999, Amd1 to4 cl.12.3.3 IEC: 62052-11:2003,Amd1 cl.5.2.2.1, IEC:62053-21: 2003, Amd1 IEC:62053-22: 2003, Amd1 IEC:62053-23 :2003, ,Amd1 IEC:62053-24 ;2014,Amd1cl.5 IEC:62055-31;2005,Amd1 , IEC62052-31:2015, CBIPPublication No: 325:2015cl.5.2.1 IS 15884 :2010,cl.5.2.1IS 16444(Part 1):2015, Amd1cl.6.5 IS 16444(Part 2): cl.6.5
1855ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC Static Watthour Meters Class 1 and 2 AC staticTransformer operated Watthour and VAR- Hour Meters,Class 0.2S, 0.5S & 1.0S AC direct connected Staticprepayment Meters for Active Energy Class 1 and 2a.c.Static Direct Connected Watthour Smart MeterClass 1 &2 a.c.Static Transformer operated Watthour and Var – HourSmart Meters Class 0.2S,0.5S and 1.0S AC watthourmeters,class 0.5,1 & 2 Metering EquipmentElectromechanical meters for active energy ( Classes 0.5,1& 2) Static meters for active energy (Classes 1 & 2) Staticmeters for active energy (Classes 0.2S & 0.5S) Staticmeters for reactive energy(Classes 2 & 3) Static meters forreactive energy at fundamental frequency ( Classes 0.5 S ,1 S & 1) Static payment meters for active energy ( Classes1 & 2) CBIP guide on Static Energy meter- No.325
Test of Resistance to heat &fire
IS 13010: 2002, Amd1& Amd2IS 13779: 1999,Amd1 to 5cl.12.4 IS 14697: 1999, Amd 1to4 cl.12.4 IEC: 62052-11:2003,Amd1 cl.5.8 , IEC62052-31:2015,IEC: 62053-21:2003, Amd1 IEC: 62053-22:2003, Amd1 IEC: 62053-23:2003, ,Amd1 IEC: 62053-24:2014,Amd1 cl.5 IEC: 62055-31:2005,Amd1 CBIP PublicationNo: 325:2015 cl.5.2.4 IS 15884:2010,cl.5.2.4 IS 16444(Part1):2015, Amd1 cl.6.5 IS16444(Part 2): cl.6.5
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 128 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1856ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC Static Watthour Meters Class 1 and 2 AC staticTransformer operated Watthour and VAR- Hour Meters,Class 0.2S, 0.5S & 1.0S AC direct connected Staticprepayment Meters for Active Energy Class 1 and 2a.c.Static Direct Connected Watthour Smart MeterClass 1 &2 a.c.Static Transformer operated Watthour and Var – HourSmart Meters Class 0.2S,0.5S and 1.0S AC watthourmeters,class 0.5,1 & 2 Metering EquipmentElectromechanical meters for active energy ( Classes 0.5,1& 2) Static meters for active energy (Classes 1 & 2) Staticmeters for active energy (Classes 0.2S & 0.5S) Staticmeters for reactive energy(Classes 2 & 3) Static meters forreactive energy at fundamental frequency ( Classes 0.5 S ,1 S & 1) Static payment meters for active energy ( Classes1 & 2) CBIP guide on Static Energy meter- No.325
Voltage Unbalance
IS 13010: 2002, Amd1& Amd2IS 13779: 1999cl.12.11,Amd1to 5 IS 14697:1999cl.12.10,Amd1 to 4 IEC:62052-11, 2003,Amd1 IEC:62053-11, 2003,Amd1 IEC:62053-21, 2003cl.8.2,Amd1IEC: 62053-22,2003cl.8.2,Amd1 IEC:62055-31 ,2005,Amd1 CBIPPublication No: 325:2015cl.5.6.2,4.6.3 IS 15884:2010cl.4.6.2 IS 16444(Part1):2015 cl.6.12,Amd1 IS16444(Part 2):,Cl. 6.12
1857ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC Static Watthour Meters Class 1 and 2 AC staticTransformer operated Watthour and VAR- Hour Meters,Class 0.2S, 0.5S & 1.0S AC direct connected Staticprepayment Meters for Active Energy Class 1 and 2a.c.Static Direct Connected Watthour Smart MeterClass 1 &2 a.c.Static Transformer operated Watthour and Var – HourSmart Meters Class 0.2S,0.5S and 1.0S AC watthourmeters,class 0.5,1 & 2 Metering EquipmentElectromechanical meters for active energy ( Classes 0.5,1& 2) Static meters for active energy (Classes 1 & 2) Staticmeters for active energy (Classes 0.2S & 0.5S) Staticmeters for reactive energy(Classes 2 & 3) Static meters forreactive energy at fundamental frequency ( Classes 0.5 S ,1 S & 1) Static payment meters for active energy ( Classes1 & 2) CBIP guide on Static Energy meter- No.325
Limits of Error due to otherinfluence quantities/ Test ofinfluence quantities -Frequencyvariation
IS 13010:2002, Amd1& Amd2cl 11.11, IS 13779: 1999cl.12.11,Amd1 to 5, IS 14697:1999 cl.12.10, Amd: 1 to 4 IEC:62052-11, 2003,Amd1 IEC:62053-11, 2003, cl.8.2, Amd1IEC: 62053-21,2003cl.8.2,Amd1 IEC:62053-22, 2003cl.8.2,Amd1IEC: 62053-23,2003cl.8.2,Amd1 IEC:62053-24 ,2014,Amd1 cl.8.3IEC: 62055-31 ,2005,Amd1 cl.8CBIP Publication No: 325:2015cl.5.6.2, 4.6.3 IS 15884:2010cl.4.6.2 IS 16444(Part1):2015 cl.6.12,Amd1 IS16444(Part 2): cl.6.12
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 129 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1858ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC Static Watthour Meters Class 1 and 2 AC staticTransformer operated Watthour and VAR- Hour Meters,Class 0.2S, 0.5S & 1.0S AC direct connected Staticprepayment Meters for Active Energy Class 1 and 2a.c.Static Direct Connected Watthour Smart MeterClass 1 &2 a.c.Static Transformer operated Watthour and Var – HourSmart Meters Class 0.2S,0.5S and 1.0S AC watthourmeters,class 0.5,1 & 2 Metering EquipmentElectromechanical meters for active energy ( Classes 0.5,1& 2) Static meters for active energy (Classes 1 & 2) Staticmeters for active energy (Classes 0.2S & 0.5S) Staticmeters for reactive energy(Classes 2 & 3) Static meters forreactive energy at fundamental frequency ( Classes 0.5 S ,1 S & 1) Static payment meters for active energy ( Classes1 & 2) CBIP guide on Static Energy meter- No.325
Limits of Error due to otherinfluence quantities/ Test ofinfluence quantities : Voltagevariation
IS 13010: 2002, Amd1& Amd2cl.11.11 IS 13779:1999cl.12.11,Amd1 to 5 IS14697: 1999 ,cl.12.10, Amd: 1to 4 IEC: 62052-11, 2003,Amd1IEC: 62053-11, 2003,Amd1cl.8.2 IEC: 62053-21,2003cl.8.2,Amd1 IEC:62053-22, 2003cl.8.2,Amd1IEC: 62053-23,2003cl.8.2,Amd1 IEC:62053-24 ,2014,Amd1 cl.8.3IEC: 62055-31 ,2005,Amd1 cl.8CBIP Publication No: 325:2015cl.5.6.2, 4.6.3 IS 15884:2010cl.4.6.2 IS 16444(Part1):2015 cl.6.12,Amd1 IS16444(Part 2): cl.6.12
1859ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC Static Watthour Meters Class 1 and 2 AC staticTransformer operated Watthour and VAR- Hour Meters,Class 0.2S, 0.5S & 1.0S AC direct connected Staticprepayment Meters for Active Energy Class 1 and 2a.c.Static Direct Connected Watthour Smart MeterClass 1 &2 a.c.Static Transformer operated Watthour and Var – HourSmart Meters Class 0.2S,0.5S and 1.0S AC watthourmeters,class 0.5,1 & 2 Metering EquipmentElectromechanical meters for active energy ( Classes 0.5,1& 2) Static meters for active energy (Classes 1 & 2) Staticmeters for active energy (Classes 0.2S & 0.5S) Staticmeters for reactive energy(Classes 2 & 3) Static meters forreactive energy at fundamental frequency ( Classes 0.5 S ,1 S & 1) Static payment meters for active energy ( Classes1 & 2) CBIP guide on Static Energy meter- No.325
Reversed phase sequence
IS 13010: 2002, Amd1& Amd2cl.11.11, IS 13779:1999cl.12.11,Amd1 to 5 IS14697: 1999 cl.12.10,Amd: 1to 4 IEC: 62052-11, 2003,Amd1IEC: 62053-11, 2003,Amd1 IEC:62053-21, 2003cl.8.2,Amd1IEC: 62053-22,2003cl.8.2,Amd1 IEC:62055-31 ,2005,Amd1 CBIPPublication No: 325:2015cl.5.6.2, 4.6.3 IS 15884:2010cl.4.6.2 IS 16444(Part1):2015 cl.6.12,Amd1 IS16444(Part 2):2017 cl.6.12
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 130 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1860ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC Static Watthour Meters Class 1 and 2 AC staticTransformer operated Watthour and VAR- Hour Meters,Class 0.2S, 0.5S & 1.0S AC direct connected Staticprepayment Meters for Active Energy Class 1 and 2a.c.Static Direct Connected Watthour Smart MeterClass 1 &2 a.c.Static Transformer operated Watthour and Var – HourSmart Meters Class 0.2S,0.5S and 1.0S AC watthourmeters,class 0.5,1 & 2 Metering EquipmentElectromechanical meters for active energy ( Classes 0.5,1& 2) Static meters for active energy (Classes 1 & 2) Staticmeters for active energy (Classes 0.2S & 0.5S) Staticmeters for reactive energy(Classes 2 & 3) Static meters forreactive energy at fundamental frequency ( Classes 0.5 S ,1 S & 1) Static payment meters for active energy ( Classes1 & 2) CBIP guide on Static Energy meter- No.325
Test of No-load condition /Running with no load
IS 13010: 2002, Amd1& Amd2cl.11.3 IS 13779: 1999cl.12.13,Amd1 to 5 IS 14697: 1999,cl.12.12, Amd 1 to 4 IEC:62052-11, 2003,Amd1 IEC:62053-11, 2003,Amd1cl.8.3.1IEC:62053-21cl.8.3.2,2003,Amd1IEC: 62053-22,2003cl.8.3.2,Amd1 IEC:62053-23 ,2003,Amd1cl.8.3.2IEC: 62053-24,2014,Amd1cl.8.4.3 IEC:62055-31 ,2005,Amd1cl.8 CBIPPublication No: 325:2015cl.5.6.4 IS 15884 :2010cl.5.6.3IS 16444(Part 1):2015cl.6.12,Amd1 IS 16444(Part 2):cl.6.12
1861ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC Static Watthour Meters Class 1 and 2 AC staticTransformer operated Watthour and VAR- Hour Meters,Class 0.2S, 0.5S & 1.0S AC direct connected Staticprepayment Meters for Active Energy Class 1 and 2a.c.Static Direct Connected Watthour Smart MeterClass 1 &2 a.c.Static Transformer operated Watthour and Var – HourSmart Meters Class 0.2S,0.5S and 1.0S AC watthourmeters,class 0.5,1 & 2 Metering EquipmentElectromechanical meters for active energy ( Classes 0.5,1& 2) Static meters for active energy (Classes 1 & 2) Staticmeters for active energy (Classes 0.2S & 0.5S) Staticmeters for reactive energy(Classes 2 & 3) Static meters forreactive energy at fundamental frequency ( Classes 0.5 S ,1 S & 1) Static payment meters for active energy ( Classes1 & 2) CBIP guide on Static Energy meter- No.325
Test of starting condition /Initial start up of the meter
IS 13010: 2002, Amd1&Amd2cl.11.4 IS 13779:1999cl.12.14, Amd1 to 5 IS14697: 1999 cl.12.13, Amd:1to 4 IEC: 62052-11, 2003,Amd1IEC: 62053-11,2003,Amd1cl.8.3.2 IEC:62053-21cl.8.3.1,8.3.3,2003,Amd1 IEC: 62053-22,2003cl.8.3.1,8.3.3,Amd1 IEC:62053-23 ,2003,Amd1cl.8.3.1,8.3.3 IEC: 62053-24,2014,Amd1cl.8.4.2,8.4.4 IEC:62055-31 ,2005,Amd1cl.8 CBIPPublication No: 325:2015cl.5.6.5 IS 15884 :2010cl.5.6.4IS 16444(Part 1):2015cl.6.12,Amd1 IS 16444(Part 2):cl.6.12
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 131 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1862ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC Static Watthour Meters Class 1 and 2 AC staticTransformer operated Watthour and VAR- Hour Meters,Class 0.2S, 0.5S & 1.0S AC direct connected Staticprepayment Meters for Active Energy Class 1 and 2a.c.Static Direct Connected Watthour Smart MeterClass 1 &2 a.c.Static Transformer operated Watthour and Var – HourSmart Meters Class 0.2S,0.5S and 1.0S AC watthourmeters,class 0.5,1 & 2 Static meters for active energy(Classes 1 & 2) Static meters for active energy (Classes0.2S & 0.5S) Static meters for reactive energy(Classes 2 &3) Static meters for reactive energy at fundamentalfrequency ( Classes 0.5 S , 1 S & 1) Static payment metersfor active energy ( Classes 1 & 2) CBIP guide on StaticEnergy meter- No.325
DC & Even harmonics in ACcurrent circuit / DC componentin the AC current circuit
IS 13779:1999cl.12.11,Amd1 to5 IEC: 62052-11: 2003,Amd1IEC: 62053-21: 2003,Amd1cl.8.2 IEC:62053-23:2003,Amd1 cl.8.2IEC: 62053-24:2014,Amd1cl.8.3 IEC: 62055-31:2005,Amd1 cl.8.3 CBIPPublication No: 325:2015,cl.5.6.2, 4.6.3 IS 15884:2010cl.4.6.2 IS 16444(Part 1):cl.6.12,Amd:1
1863ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC Static Watthour Meters Class 1 and 2 AC staticTransformer operated Watthour and VAR- Hour Meters,Class 0.2S, 0.5S & 1.0S AC direct connected Staticprepayment Meters for Active Energy Class 1 and 2a.c.Static Direct Connected Watthour Smart MeterClass 1 &2 a.c.Static Transformer operated Watthour and Var – HourSmart Meters Class 0.2S,0.5S and 1.0S AC watthourmeters,class 0.5,1 & 2
Waveform:10% of 3rdHarmonic in current
IS 13010: 2002, cl.11.11 ,Amd1& Amd2,IS 13779: 1999cl.12.11,Amd1 to 5 IS 14697:1999 cl.12.10,Amd 1 to 4 IS15884 :2010cl.4.6.2 IS16444(Part 1):2015,Amd1cl.6.12 IS 16444(Part 2):2017cl.6.12 CBIP Publication No:325:2015 cl.5.6.2, 4.6.3 IEC:62053-11, Amd1
1864ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC Static Watthour Meters Class 1 and 2 AC staticTransformer operated Watthour and VAR- Hour Meters,Class 0.2S, 0.5S & 1.0S AC direct connected Staticprepayment Meters for Active Energy Class 1 and 2a.c.Static Direct Connected Watthour Smart MeterClass 1 &2 a.c.Static Transformer operated Watthour and Var – HourSmart Meters Class 0.2S,0.5S and 1.0S AC watthourmeters,class 0.5,1 & 2 CBIP guide on Static Energy meter-No.325
Stray d.c magnetic induction ofexternal origin/ continuousmagnetic induction of externalorigin (67mT)
IS 13010: 2002, Amd1& Amd2IS 13779: 1999,Amd1 to 5cl.12.11 IS 14697: 1999,Amd 1to 4 cl.12.10 , CBIP PublicationNo: 325:2015, cl.5.6.2,4.6.3 IS15884 :2010cl.4.6.2 IS16444(Part 1):2015cl.6.12,Amd1 IS 16444(Part 2):cl.6.12
1865ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC Static Watthour Meters Class 1 and 2 AC staticTransformer operated Watthour and VAR- Hour Meters,Class 0.2S, 0.5S & 1.0S AC direct connected Staticprepayment Meters for Active Energy Class 1 and 2a.c.Static Direct Connected Watthour Smart MeterClass 1 &2 a.c.Static Transformer operated Watthour and Var – HourSmart Meters Class 0.2S,0.5S and 1.0S CBIP guide on StaticEnergy meter- No.325
AC High voltage test
IS 13010: 2002, Amd1& Amd 2cl.11.10.3 IS 13779: 1999Amd1 to 5 cl.12.7.6.3, IS14697: 1999 Amd: 1 to 4cl.12.7.6.3, IS 15884 :2010cl.5.4.6.3 IS 16444(Part1):2015 cl.6.10.6,Amd1 IS16444(Part 2): cl.6.10.6
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 132 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1866ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC Static Watthour Meters Class 1 and 2 AC staticTransformer operated Watthour and VAR- Hour Meters,Class 0.2S, 0.5S & 1.0S AC direct connected Staticprepayment Meters for Active Energy Class 1 and 2a.c.Static Direct Connected Watthour Smart MeterClass 1 &2 a.c.Static Transformer operated Watthour and Var – HourSmart Meters Class 0.2S,0.5S and 1.0S Static meters foractive energy (Classes 1 & 2) Static meters for activeenergy (Classes 0.2S & 0.5S) Static meters for reactiveenergy(Classes 2 & 3) Static meters for reactive energy atfundamental frequency ( Classes 0.5 S , 1 S & 1) Staticpayment meters for active energy ( Classes 1 & 2) CBIPguide on Static Energy meter
Dry heat test
IS 13779: 1999, Amd1 to 5cl.12.6.1 IS 14697: 1999,Amd:1 to 4 cl.12.6.1, IEC:62052-11: 2003, Amd1 cl.6.3.1IEC: 62053-21: 2003, Amd1IEC: 62053-22: 2003, Amd1IEC: 62053-23 :2003, ,Amd1cl.6 IEC: 62053-24 :2014,Amd1cl.6 IEC: 62055-31 :2005,Amd1Cl.6.0 CBIP Publication No:325:2015 cl.5.3.1 IS 15884:2010,cl.5.3.1 IS 16444(Part1):2015, Amd1 cl.6.9 IS16444(Part 2): cl.6.9
1867ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC Static Watthour Meters Class 1 and 2 AC staticTransformer operated Watthour and VAR- Hour Meters,Class 0.2S, 0.5S & 1.0S AC direct connected Staticprepayment Meters for Active Energy Class 1 and 2a.c.Static Direct Connected Watthour Smart MeterClass 1 &2 a.c.Static Transformer operated Watthour and Var – HourSmart Meters Class 0.2S,0.5S and 1.0S CBIP guide on StaticEnergy meter- No.325
Continuous abnormal d.cmagnetic induction of externalorigin(0.2/0.27T)
IS 13779: 1999 cl.12.11,Amd1to 5 IS 14697: 1999 cl.12.10,Amd 1 to 4, CBIP PublicationNo: 325:2015 cl.5.6.2,4.6.3 IS15884 :2010cl.4.6.2 IS16444(Part 1):2015cl.6.12,Amd1 IS 16444(Part 2):cl.6.12
1868ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC Static Watthour Meters Class 1 and 2 AC staticTransformer operated Watthour and VAR- Hour Meters,Class 0.2S, 0.5S & 1.0S AC direct connected Staticprepayment Meters for Active Energy Class 1 and 2a.c.Static Direct Connected Watthour Smart MeterClass 1 &2 a.c.Static Transformer operated Watthour and Var – HourSmart Meters Class 0.2S,0.5S and 1.0S energy (Classes 1 &2) Static meters for active energy (Classes 0.2S & 0.5S)Static meters for reactive energy(Classes 2 & 3) Staticmeters for reactive energy at fundamental frequency (Classes 0.5 S , 1 S & 1) Static payment meters for activeenergy ( Classes 1 & 2) CBIP guide on Static Energy meter-No.325
Damp heat cyclic test
IS 13779: 1999, Amd1 to 5cl.12.6.3 IS 14697: 1999,Amd:1 to 4 cl.12.6.3 IEC:62052-11: 2003, Amd1 cl.6.3.3IEC: 62053-21: 2003, Amd1IEC: 62053-22: 2003, Amd1IEC: 62053-23 :2003, ,Amd1cl.6 IEC: 62053-24 :2014,Amd1cl.6 IEC: 62055-31 :2005,Amd1Cl.6.0 CBIP Publication No:325:2015 cl.5.3.3 IS 15884:2010,cl.5.3.3 IS 16444(Part1):2015, Amd1 cl.6.9 IS16444(Part 2): cl.6.9
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 133 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1869ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC Static Watthour Meters Class 1 and 2 AC staticTransformer operated Watthour and VAR- Hour Meters,Class 0.2S, 0.5S & 1.0S AC direct connected Staticprepayment Meters for Active Energy Class 1 and 2a.c.Static Direct Connected Watthour Smart MeterClass 1 &2 a.c.Static Transformer operated Watthour and Var – HourSmart Meters Class 0.2S,0.5S and 1.0S Static meters foractive energy (Classes 1 & 2) Static meters for activeenergy (Classes 0.2S & 0.5S) Static meters for reactiveenergy(Classes 2 & 3) Static meters for reactive energy atfundamental frequency ( Classes 0.5 S , 1 S & 1) Staticpayment meters for active energy ( Classes 1 & 2) CBIPguide on Static Energy meter- No.325
Cold test
IS 13779: 1999, Amd1 to 5cl.12.6.2, IS 14697: 1999,Amd:1 to 4 cl.12.6.2 IEC:62052-11: 2003, Amd1cl.6.3.2, IEC: 62053-21: 2003,Amd1 IEC: 62053-22: 2003,Amd1 IEC: 62053-23 :2003,,Amd1 cl.6 IEC: 62053-24:2014,Amd1 cl.6 IEC: 62055-31:2005,Amd1 Cl.6.0 CBIPPublication No: 325:2015cl.5.3.2 IS 15884 :2010,cl5.3.2IS 16444(Part 1):2015, Amd1cl.6.9 IS 16444(Part 2): cl.6.9
1870ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC Static Watthour Meters Class 1 and 2 AC staticTransformer operated Watthour and VAR- Hour Meters,Class 0.2S, 0.5S & 1.0S AC direct connected Staticprepayment Meters for Active Energy Class 1 and 2a.c.Static Direct Connected Watthour Smart MeterClass 1 &2 a.c.Static Transformer operated Watthour and Var – HourSmart Meters Class 0.2S,0.5S and 1.0S Static meters foractive energy (Classes 1 & 2) Static meters for activeenergy (Classes 0.2S & 0.5S) Static meters for reactiveenergy(Classes 2 & 3) Static meters for reactive energy atfundamental frequency ( Classes 0.5 S , 1 S & 1) Staticpayment meters for active energy ( Classes 1 & 2) CBIPguide on Static Energy meter- No.325
Fast Transient burst test
IS 13779: 1999, Amd1 to 5cl.12.9.4 IS 14697: 1999, Amd1 to 4 cl.12.8.4 IEC: 62052-11:2003, Amd1 cl.7.5.4 IEC:62053-21: 2003, Amd1 IEC:62053-22: 2003, Amd1 cl.8.2IEC: 62053-23 :2003, ,Amd1cl.8.2 IEC: 62053-24:2014,Amd1 cl.8.3 IEC:62055-31 :2005,Amd1 cl.7.8.4CBIP Publication No: 325:2015cl.5.5.3 IS 15884 :2010,cl.5.5.4IS 16444(Part 1):2015cl.6.11,Amd1 IS 16444(Part 2):cl.6.11
1871ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC Static Watthour Meters Class 1 and 2 AC staticTransformer operated Watthour and VAR- Hour Meters,Class 0.2S, 0.5S & 1.0S AC direct connected Staticprepayment Meters for Active Energy Class 1 and 2a.c.Static Direct Connected Watthour Smart MeterClass 1 &2 a.c.Static Transformer operated Watthour and Var – HourSmart Meters Class 0.2S,0.5S and 1.0S Static meters foractive energy (Classes 1 & 2) Static meters for activeenergy (Classes 0.2S & 0.5S) Static meters for reactiveenergy(Classes 2 & 3) Static meters for reactive energy atfundamental frequency ( Classes 0.5 S , 1 S & 1) Staticpayment meters for active energy ( Classes 1 & 2) CBIPguide on Static Energy meter- No.325
Immunity to Earth/phasefault/Abnormal voltagecondition
IS 13779: 1999, Amd1 to 5cl.12.8 IS 14697: 1999, Amd 1to4 cl.12.17 IEC: 62052-11:2003, Amd1 cl.7.4 IEC:62053-24 :2014,Amd1 IEC:62055-31 :2005,Amd1 cl.7.2.3CBIP Publication No: 325:2015cl.4.4.7 IS 16444(Part 1):2015Amd1 cl.6.10.7, IS 16444(Part2): cl.6.10.7
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 134 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1872ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC Static Watthour Meters Class 1 and 2 AC staticTransformer operated Watthour and VAR- Hour Meters,Class 0.2S, 0.5S & 1.0S AC direct connected Staticprepayment Meters for Active Energy Class 1 and 2a.c.Static Direct Connected Watthour Smart MeterClass 1 &2 a.c.Static Transformer operated Watthour and Var – HourSmart Meters Class 0.2S,0.5S and 1.0S Static meters foractive energy (Classes 1 & 2) Static meters for activeenergy (Classes 0.2S & 0.5S) Static meters for reactiveenergy(Classes 2 & 3) Static meters for reactive energy atfundamental frequency ( Classes 0.5 S , 1 S & 1) Staticpayment meters for active energy ( Classes 1 & 2) CBIPguide on Static Energy meter- No.325
Radio Interferencemeasurement / Radiointerference suppression a)Conducted Emission
IS 13779: 1999 ,Amd1 to 5cl.12.9.5 IS 14697: 1999 , Amd1 to 4 cl.12.8.5 IEC: 62052-11:2003,Amd1 cl.7.5.8 IEC:62053-21: 2003, Amd1 IEC:62053-22: 2003, Amd1 IEC:62053-23 :2003, ,Amd1 IEC:62053-24 :2014,Amd1 IEC:62055-31 :2005,Amd1 CBIPPublication No: 325:2015cl.5.5.5 IS 15884 :2010,cl.5.5.5IS 16444(Part 1):2015cl.6.11,Amd1 IS 16444(Part 2):cl.6.11
1873ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC Static Watthour Meters Class 1 and 2 AC staticTransformer operated Watthour and VAR- Hour Meters,Class 0.2S, 0.5S & 1.0S AC direct connected Staticprepayment Meters for Active Energy Class 1 and 2 ACwatthour meters,class 0.5,1 & 2
Insulation Resistance test
IS 13010:2002, Amd1&Amd2,cl.11.2 IS 13779:1999Amd1 to 5 cl.12.7.6.4, IS14697: 1999 Amd1 to 4cl.12.7.6.4, IS 15884 :,cl.5.4.6.4
1874ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC Static Watthour Meters Class 1 and 2 AC staticTransformer operated Watthour and VAR- Hour Meters,Class 0.2S, 0.5S & 1.0S a.c.Static Transformer operatedWatthour and Var – Hour Smart Meters Class 0.2S,0.5S and1.0S
Test of immunity toElectromagnetic HF/RF fields
IS 13779: 1999, Amd1 to 5cl.12.9.3 IS 14697: 1999, Amd1 to 4 cl.12.8.3 IS 16444(Part2): cl.6.11
1875ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC Static Watthour Meters Class 1 and 2 AC staticTransformer operated Watthour and VAR- Hour Meters,Class 0.2S, 0.5S & 1.0S CBIP guide on Static Energy meter-No.325
Radio Interferencemeasurement: b) RadiatedEmission
IS 13779: 1999 , Amd1 to 5cl.12.9.5 IS 14697: 1999, Amd:1 to4 cl.12.8.5, IS 16444(part2) :2017 cl.6.11, CBIP 325:cl.5.5.5
1876ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC direct connected Static prepayment Meters for ActiveEnergy Class 1 and 2 a.c.Static Direct Connected WatthourSmart MeterClass 1 & 2 a.c.Static Transformer operatedWatthour and Var – Hour Smart Meters Class 0.2S,0.5S and1.0S Static meters for active energy (Classes 1 & 2) Staticmeters for active energy (Classes 0.2S & 0.5S) Staticmeters for reactive energy(Classes 2 & 3) Static meters forreactive energy at fundamental frequency ( Classes 0.5 S ,1 S & 1) Static payment meters for active energy ( Classes1 & 2) CBIP guide on Static Energy meter- No.325
Surge immunity test
IEC: 62052-11: 2003, Amd1cl.7.5.6, IEC 62052-31:2015,IEC: 62053-21: 2003, Amd1IEC: 62053-22: 2003, Amd1IEC: 62053-23 :2003, ,Amd1IEC: 62053-24 :2014,Amd1 IEC:62055-31 :2005,Amd1 cl.7.8.6CBIP Publication No: 325:2015IS 15884 :2010,cl.5.5.6 &Annex G4 IS 16444(Part1):2015 cl.6.11,Amd1 IS16444(Part 2): cl.6.11
1877ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC direct connected Static prepayment Meters for ActiveEnergy Class 1 and 2 For UC1,UC2 & UC3 a.c.Static DirectConnected Watthour Smart Meter Class 1 and 2; For UC1,UC2 & UC3
Load switching capability Faultcurrent making capacity,Electrical Endurance
IS 15884 :2010 (RA : 2016 ) IS16444(part 1):2015,Amd:1,2017, IEC: 62055-31,2005,Amd1:
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 135 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1878ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC direct connected Static prepayment Meters for ActiveEnergy Class 1 and 2 For UC1,UC2 & UC3 a.c.Static DirectConnected Watthour Smart Meter Class 1 and 2; For UC1,UC2 & UC3
Short circuit current carryingcapacity Short Time OverCurrent Test
IS 15884 :2010 (RA : 2016 ) IS16444(part 1):2015,Amd:1,2017, IEC: 62055-31,2005,Amd1
1879ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC direct connected Static prepayment Meters for ActiveEnergy Class 1 and 2 Static payment meters for activeenergy ( Classes 1 & 2)
Dielectric strength IS 15884 :2010 cl.G-8 IEC:62055-31 :,Amd1 cl.8
1880ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC direct connected Static prepayment Meters for ActiveEnergy Class 1 and 2 Static payment meters for activeenergy ( Classes 1 & 2)
Functional requirements IS 15884 :2010 cl.6.0, Annex A, IEC: 62055-31:,,Amd1 cl.9
1881ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC direct connected Static prepayment Meters for ActiveEnergy Class 1 and 2 Static payment meters for activeenergy ( Classes 1 & 2)
Line to load voltage surge testIS 15884 :2010 cl.G4 IS16444(Part 1):2015 ,Amd1 IEC:62055-31:,Amd1
1882ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC direct connected Static prepayment Meters for ActiveEnergy Class 1 and 2 Static payment meters for activeenergy ( Classes 1 & 2)
Minimum switched currentIS 15884 :2010 cl.G7 IS16444(Part 1):2015 ,Amd:1IEC: 62055-31 :,Amd1
1883ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC direct connected Static prepayment Meters for ActiveEnergy Class 1 and 2 Static payment meters for activeenergy ( Classes 1 & 2)
Normal operationIS 15884 :2010,Annex G2 IS16444(Part 1):2015 ,Amd1 IEC:62055-31 :,Amd1
1884ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC direct connected Static prepayment Meters for ActiveEnergy Class 1 and 2 Static payment meters for activeenergy ( Classes 1 & 2)
Test of consumption basedcharging functions
IS 15884, cl.5.9 IEC: 62055-31,Amd 1
1885ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC direct connected Static prepayment Meters for ActiveEnergy Class 1 and 2 Static payment meters for activeenergy ( Classes 1 & 2)
Test of Time -based chargingfunctions
IS 15884 :2010 cl.5.10, IEC:62055-31,Amd1
1886ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC static Transformer operated Watthour and VAR- HourMeters, Class 0.2S, 0.5S & 1.0S a.c.Static Transformeroperated Watthour and Var – Hour Smart Meters Class0.2S,0.5S and 1.0S
Phase of auxiliary supply by120°
IS 14697: 1999 Amd 1 to 4cl.12.10, IS 16444(Part 2):,Cl.6.12
1887ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC static Transformer operated Watthour and VAR- HourMeters, Class 0.2S, 0.5S & 1.0S CBIP guide on Static Energymeter- No.325
Tamper & fraud monitoring CBIP Publication No: 325:2015IS 14697: , G-10, Amd 1 to4
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 136 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1888ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC static watthour meters for active energy (classes 0.2S &0.5 S) AC static watthour meters class 1.0 & 2.0 ACwatthour meters class 0.5, 1.0 & 2.0 AC Static ElectricalEnergy Meters
Resistance to heat & fire
IEC 62053-22 : 2003 IEC62052-11 : 2003 IS 14697 :1999 (RA 2014) IS 13779 :1999 (RA 2014) IEC 62053-21 :2003 IEC 62052-11 : 2003 IS13010 : 2002(RA 2017) IEC62053-11 : 2003 IEC 62052-11: 2003 CBIP TR 88 :
1889ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC static watthour meters for active energy (classes 0.2S &0.5 S) AC static watthour meters class 1.0 & 2.0 ACwatthour meters class 0.5, 1.0 & 2.0 AC Static ElectricalEnergy Meters
Impulse voltage test
IEC 62053-22 : 2003 IEC62052-11 : 2003 IS 14697 :1999 (RA 2014) IEC 62053-21 :2003 IEC 62052-11 : 2003 IS13779 : 1999 (RA 2014) IS13010 : 2002 (RA 2017) IEC62053-11 : 2003 IEC 62052-11: 2003 CBIP publication No 325:
1890ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC static watthour meters for active energy (classes 0.2S &0.5 S) AC static watthour meters class 1.0 & 2.0 Short time current test
IEC 62053-22 : 2016 IEC62052-11 : 2016 IS 14697 :1999 (RA 2014) IS 13779:1999(RA 2014) IEC 62053-21 : 2016IEC 62052-11 :
1891ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC watthour meters,class 0.5,1 & 2 Electromechanicalmeters for active energy ( Classes 0.5,1 & 2)
Adjustment /Range ofadjustment
IS 13010: 2002, Amd1 & 2cl.11.7,11.14 IEC: 62053-11:Amd1 cl.9
1892ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC watthour meters,class 0.5,1 & 2 Metering EquipmentElectromechanical meters for active energy ( Classes 0.5,1& 2)
Mechanical load of register /Mechanical load of eithersingle or multi-rate register
IS 13010:2002, Amd1 & 2cl.11.11 IEC: 62053-11:
1893ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC watthour meters,class 0.5,1 & 2 Metering EquipmentElectromechanical meters for active energy ( Classes 0.5,1& 2)
Oblique suspension IS 13010: 2002, Amd1 & 2cl.11.11 IEC: 62053-11:
1894ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC watthour meters,class 0.5,1 & 2 Independence of adjustment IS 13010: , Amd1 & 2 cl.11.15
1895ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC watthour meters,class 0.5,1 & 2 Magnetic field of an accessory IS 13010:, Amd1 & 2 cl.11.11
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 137 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1896ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC watthour meters,class 0.5,1 & 2 Material used in the dial IS 13010: , Amd1 & 2 cl.11.18
1897ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC watthour meters,class 0.5,1 & 2 Running at low load IS 13010: , Amd1 & 2 cl.11.16
1898ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC watthour meters,class 0.5,1 & 2 Sustained accuracy test IS 13010: , Amd1 & 2 cl.11.16
1899ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC watthour meters,class 0.5,1 & 2AC Static WatthourMeters Class 1 and 2 AC static Transformer operatedWatthour and VAR- Hour Meters, Class 0.2S, 0.5S &a.c.Static Direct Connected Watthour Smart MeterClass 1 &2 a.c.Static Transformer operated Watthour and Var – HourSmart Meters Class 0.2S,0.5S and 1.0S CBIP guide on StaticEnergy meter- No.325 AC direct connected Staticprepayment Meters for Active Energy Class 1 and 2
Test on limits of error / Limitsof error due to variation ofcurrent
IS 13010: 2002, Amd1& Amd2cl.11.5 IS 13779: 1999 ,Amd1to 5 cl.11.1,12.3.1 ,12.3.2 IS14697: 1999, Amd 1 to 4cl.11.1,12.3.1,12.3.2IS 15884:2010cl.4.6.1 IS 16444(Part1):2015 cl.6.12,Amd1 IS16444(Part 2):2017 cl.6.12,CBIP Publication No: 325:cl.5.6.8,5.2.3,5.2.2
1900ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC wattour meters class 0.5, 1.0 & 2.0 AC Static ElectricalEnergy Meters Short time current test
IS 13010 : 2002 (RA : 2017) IEC62053-11:2016 IEC62052-11:2016 CBIP TR 88,
1901ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC wattour meters class 0.5, 1.0 & 2.0 AC Static ElectricalEnergy Meters Short time current test
IS 13010 2002, IEC 62053-112016, IEC 62052-11 2016, CBIPTR 88
1902ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
AC wattour meters class 0.5, 1.0 & 2.0 AC Static ElectricalEnergy Meters Short time current test
IS 13010 2002, IEC 62053-112016, IEC 62052-11 2016, CBIPTR 88
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 138 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1903ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
Data Exchange for Electricity Meter Reading, Tariff andLoad Control – Companion Specification - IS 15959 (Part 1):2011 Static Energy Meter Category A, B, C1, C2 & C3
2.11 Event code and Eventlogging : 2.11.1 Indian EventReference Table – VoltageRelated 2.11.2 Indian EventReference Table – CurrentRelated 2.11.3 Indian EventReference Table – PowerRelated 2.11.4 Indian EventReference Table – TransactionRelated 2.11.5 Indian EventReference Table – Other 2.11.6Indian Event Reference Table –Non Roll Over 2.11.7 IndianEvent Reference Table –Control 2.12 Selective accessby Entry for Event Log Profile
IS 15959 (Part 1) Clause 4 to14 Annex A- L
1904ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
Data Exchange for Electricity Meter Reading, Tariff andLoad Control – Companion Specification - IS 15959 (Part 1):2011 Static Energy Meter Category A, B, C1, C2 & C3
2.9.2 Block load profileparameters 2.9.3 Selectiveaccess by Range for Block loadprofile 2.9.4 Daily load profileparameters 2.9.5 Selectiveaccess by Range for Daily loadprofile 2.9.6 Billing profileparameters 2.9.7 Selectiveaccess by Entry for Billingprofile 2.10 General Purposeparameters : 2.10.1 NamePlate Details 2.10.2Programmable Parameters
IS 15959 (Part 1) Clause 4 to14 Annex A- L
1905ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
Data Exchange for Electricity Meter Reading, Tariff andLoad Control – Companion Specification - IS 15959 (Part 1):2011 Static Energy Meter Category A, B, C1, C2 & C3
Compliance test: 1.0Conformance to DLMS / COSEM(IEC 62056) 2.0 Parameterverification: 2.1 SNRM/UA 2.2Object list download 2.3Association properties 2.4Simultaneous operation 2.5Security: 2.5.1 Lowest LevelSecurity Secret 2.5.2 Low LevelSecurity (LLS) Secret 2.5.3High Level Security (HLS)Secret 2.6 ToU setting 2.7Billing Period 2.8 Billing PeriodCounter 2.9 Parameter list:2.9.1 (a) InstantaneousParameters 2.9.1 (b) Snap Shotof Instantaneous Parameters2.9.1 (c) Scaler Profile
IS 15959 (part 1) Clause 4 to14 Annex A-L
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 139 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1906ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
Data Exchange for Electricity Meter Reading, Tariff andLoad Control – Companion Specification - IS 15959 (Part 2):2016 Smart Meter Category D1 & D2
10.0 Daily load profileparameters 11.0 Selectiveaccess by Range for Daily loadprofile 12.0 ToU setting 13.0Billing profile parameters 14.0Billing Period 15.0 BillingPeriod Counter 16.0 Selectiveaccess by Entry for Billingprofile
IS 15959 (Part 2) Clause 4 to24
1907ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
Data Exchange for Electricity Meter Reading, Tariff andLoad Control – Companion Specification - IS 15959 (Part 2):2016 Smart Meter Category D1 & D2
17.0 Event code and Eventlogging : (a) Indian EventReference Table – VoltageRelated (b) Indian EventReference Table – CurrentRelated (c) Indian EventReference Table – PowerRelated (d) Indian EventReference Table – TransactionRelated (e) Indian EventReference Table – Other (f)Indian Event Reference Table –Non Roll Over (g) Indian EventReference Table – Control 18.0Selective access by Entry forEvent Log Profile
IS 15959 (Part 2) Clause 4 to24
1908ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
Data Exchange for Electricity Meter Reading, Tariff andLoad Control – Companion Specification - IS 15959 (Part 2):2016 Smart Meter Category D1 & D2
19.0 General Purposeparameters : (a) Name PlateDetails (b) ProgrammableParameters 20.0 Test for SmartMeter Functional Requirements21.0 Tests for Smart Metercommunicability (a)Association (b) Data read (c)Profile read (d)SelectiveProgrammability (e) Reportingof events (f) Connect/Disconnect (g) Firmwareupgrade
IS 15959 (Part 2) Clause 4 to24
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 140 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1909ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
Data Exchange for Electricity Meter Reading, Tariff andLoad Control – Companion Specification - IS 15959 (Part 2):2016 Smart Meter Category D1 & D2
Compliance test: 1.0Conformance to DLMS/COSEM(IEC 62056) 2.0 Parameterverification: 3.0 SNRM/UA 4.0Object list download 5.0Association properties 6.0Security: (a) Lowest LevelSecurity Secret (b) Low LevelSecurity (LLS) Secret (c) HighLevel Security (HLS) SecretParameter list: 7.0 (a)Instantaneous Parameters 7.0(b) Snap Shot of InstantaneousParameters 7.0 (c) ScalerProfile 8.0 Block load profileparameters 9.0 Selectiveaccess by Range for Block loadprofile 10.0 Daily load profil
IS 15959 (part 2) Clause 4 to24
1910ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
Data Exchange for Electricity Meter Reading, Tariff andLoad Control – Companion Specification - IS 15959 (Part 2):2016
Conformance test IEC 62056 (DLMS/COSEM) part21,42,46,47,5-3, 6-1 & 6-2
1911ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
Data Exchange for Electricity Meter Reading, Tariff andLoad Control – Companion Specification - IS 15959 (Part 3):2017 Smart Meter Category D3 & D4
17.0 Event code and Eventlogging : (a) Indian EventReference Table – VoltageRelated (b) Indian EventReference Table – CurrentRelated (c) Indian EventReference Table – PowerRelated (d) Indian EventReference Table – TransactionRelated (e) Indian EventReference Table – Other (f)Indian Event Reference Table –Non Roll Over 18.0 Selectiveaccess by Entry for Event LogProfile
IS 15959 (Part 3) Clause 4 to28
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 141 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1912ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
Data Exchange for Electricity Meter Reading, Tariff andLoad Control – Companion Specification - IS 15959 (Part 3):2017 Smart Meter Category D3 & D4
19.0 General Purposeparameters : (a) Name PlateDetails (b) ProgrammableParameters 20.0 Tests forSmart Meter FunctionalRequirements 21.0 Tests forSmart Meter communicabilitya) Association (b) Data read (c)Profile read (d)SelectiveProgrammability (e) Reportingof events (g) Firmwareupgrade
IS 15959 (Part 3) Clause 4 to28
1913ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
Data Exchange for Electricity Meter Reading, Tariff andLoad Control – Companion Specification - IS 15959 (Part 3):2017
Conformance test IEC 62056 (DLMS/COSEM) Parts21,42,46,47, 5-3,6-1 & 6-2
1914ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
Data Exchange for Electricity Meter Reading, Tariff andLoad Control – Companion Specification - IS 15959 (Part 3):2017 Smart Meter Category D3 & D4
10.0 Daily load profileparameters 11.0 Selectiveaccess by Range for Daily loadprofile 12.0 ToU setting 13.0Billing profile parameters 14.0Billing Period 15.0 BillingPeriod Counter 16.0 Selectiveaccess by Entry for Billingprofile
IS 15959 (Part 3) Clause 4 to28
1915ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
Data Exchange for Electricity Meter Reading, Tariff andLoad Control – Companion Specification - IS 15959 (Part 3):2017
Compliance test: 1.0Conformance to DLMS/COSEM(IEC 62056) 2.0 Parameterverification: 3.0 SNRM/UA 4.0Object list download 5.0Association properties 6.0Security: (a) Lowest LevelSecurity Secret (b) Low LevelSecurity (LLS) Secret (c) HighLevel Security (HLS) SecretParameter list: 7.0 (a)Instantaneous Parameters 7.0(b) Snap Shot of InstantaneousParameters 7.0 (c) ScalerProfile 8.0 Block load profileparameters 9.0 Selectiveaccess by Range for Block loadprofile 10.0 Daily load profil
IS 15959 (Part 3) Clause 4 to28
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 142 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1916ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
Electromechanical meters for active energy ( Classes 0.5,1& 2) Static meters for active energy (Classes 1 & 2) Staticmeters for active energy (Classes 0.2S & 0.5S) Staticmeters for reactive energy(Classes 2 & 3) Static meters forreactive energy at fundamental frequency ( Classes 0.5 S ,1 S & 1) Static payment meters for active energy ( Classes1 & 2)
Continuous magnetic inductionof external origin
IEC: 62052-11: 2003,Amd1 IEC:62053-21: 2003,Amd1 cl.8.2IEC: 62053-22: 2003,Amd1cl.8.2 IEC: 62053-23:2003,Amd1 cl.8.2 IEC:62053-24 :2014,Amd1 cl.8.3IEC: 62055-31 :,Amd1 cl.8
1917ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
Electromechanical meters for active energy ( Classes 0.5,1& 2) Static meters for active energy (Classes 1 & 2) Staticmeters for active energy (Classes 0.2S & 0.5S) Staticmeters for reactive energy(Classes 2 & 3) Static meters forreactive energy at fundamental frequency ( Classes 0.5 S ,1 S & 1)
Impulse voltage test
IEC: 62053-11, 2003, Amd1cl.7.4 IEC: 62053-21cl.7.4,2003,Amd1 IEC:62053-22, 2003,Amd1,cl.7.4IEC: 62053-23,2003,Amd1,cl.7.4 IEC:62053-24 ,Amd1,cl.7.4
1918ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
Metering Equipment Electromechanical meters for activeenergy ( Classes 0.5,1 & 2) Static meters for active energy(Classes 1 & 2) Static meters for active energy (Classes0.2S & 0.5S) Static meters for reactive energy(Classes 2 &3) Static meters for reactive energy at fundamentalfrequency ( Classes 0.5 S , 1 S & 1) Static payment metersfor active energy ( Classes 1 & 2)
Test on limits of error / Limitsof error due to variation of thecurrent
IEC: 62052-11, 2003,Amd1 IEC:62053-11, 2003,Amd1 cl.8.1IEC: 62053-21 2003,Amd1cl.8.1, IEC: 62053-22,2003,cl.8.1,Amd1 IEC:62053-23 ,2003,cl.8.1,Amd1IEC: 62053-24,2014,Amd1cl.8.2 IEC:62055-31 ,,Amd1cl.8
1919ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
Metering Equipment-general requirementsElectromechanical meters for active energy ( Classes 0.5,1& 2) Static meters for active energy (Classes 1 & 2) Staticmeters for active energy (Classes 0.2S & 0.5S)
AC High voltage test /Dielectric Test
IEC: 62052-11, 2003, Amd1cl.7.3.3, IEC 62052-31;2015IEC: 62053-11, 2003, Amd1cl.7.4 IEC: 62053-21cl.7.4,2003,Amd1 IEC:62053-22, 2003,Amd1,cl.7.4
1920ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
Meters Class 1 and 2 AC static Transformer operatedWatthour and VAR- Hour Meters, Class 0.2S, 0.5S & 1.0S ACdirect connected Static prepayment Meters for ActiveEnergy Class 1 and 2 a.c.Static Direct Connected WatthourSmart MeterClass 1 & 2 a.c.Static Transformer operatedWatthour and Var – Hour Smart Meters Class 0.2S,0.5S and1.0S Static meters for active energy (Classes 1 & 2) Staticmeters for active energy (Classes 0.2S & 0.5S) Staticmeters for reactive energy(Classes 2 & 3) Static meters forreactive energy at fundamental frequency ( Classes 0.5 S ,1 S & 1) Static payment meters for active energy ( Classes1 & 2) CBIP guide on Static Energy meter- No.325
Electro static discharges test
IS 13779: 1999, Amd1 to 5cl.12.9.2 IS 14697: 1999, Amd1 to 4 cl.12.8.2 IEC: 62052-11:2003, Amd1 cl.7.5.2 IEC:62053-21: 2003, Amd1 IEC:62053-22: 2003, Amd1 IEC:62053-23 :2003, ,Amd1 IEC:62053-24 :2014,Amd1 IEC:62055-31 :2005,Amd1 cl.7.8.2CBIP Publication No: 325:2015cl.5.5.2 IS 15884 :2010,cl.5.5.2IS 16444(Part 1):2015, Amd1cl.6.11 IS 16444(Part 2):cl.6.11
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 143 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1921ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
Meters Class 1 and 2 AC static Transformer operatedWatthour and VAR- Hour Meters, Class 0.2S, 0.5S & 1.0S ACdirect connected Static prepayment Meters for ActiveEnergy Class 1 and 2 a.c.Static Direct Connected WatthourSmart MeterClass 1 & 2 a.c.Static Transformer operatedWatthour and Var – Hour Smart Meters Class 0.2S,0.5S and1.0S Static meters for active energy (Classes 1 & 2) Staticmeters for active energy (Classes 0.2S & 0.5S) Staticmeters for reactive energy(Classes 2 & 3) Static meters forreactive energy at fundamental frequency ( Classes 0.5 S ,1 S & 1) Static payment meters for active energy ( Classes1 & 2) CBIP guide on Static Energy meter- No.325
Influence of supply voltage:
IS 13779: 1999,Amd1 to 5cl.12.7.2 IS 14697: 1999,Amd1to 4 cl.12.7.2 IEC:62052-11: 2003,Amd1 cl.7.1IEC: 62052-21:2003,Amd1 IEC:62055-31 : 2005, Amd1 cl.7.2CBIP Publication No: 325:2015cl.5.4.2 IS 15884:2010 cl.4.4.2& ,5.4.2 IS 16444(Part1):2015,Amd1 cl.6.10.2 IS16444(Part 2): cl.6.10.2
1922ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
Static meters for active energy (Classes 0.2S & 0.5S) ACstatic Transformer operated Watthour and VAR- HourMeters, Class 0.2S, 0.5S & 1.0S AC direct connected Staticprepayment Meters for Active Energy Class 1 and 2a.c.Static Direct Connected Watthour Smart MeterClass 1 &2 a.c.Static Transformer operated Watthour and Var – HourSmart Meters Class 0.2S,0.5S and 1.0S CBIP guide on StaticEnergy meter- No.325
Auxiliary voltage ±15% /operation of accessories
IS 14697: 1999cl.12.10, Amd 1to 4 , CBIP Publication No:325:2015 cl.5.6.2,4.6.3, IS15884 :2010 cl.4.6.2, IS16444(Part 1):2015 ,Amd1Cl6.12 IS 16444(Part 2):2017cl.6.12 IEC 62053-22 cl.8.2,IS13779: 1999, Amd1 to 5cl.12.10, IEC: 62053-21: 2003,Amd1 ,IEC: 62053-22: 2003,Amd1 IEC: 62053-23 :2003,,Amd1 IEC: 62053-24:2014,Amd1 IEC: 62055-31:2005, Amd1 , IEC: 62053-11 ,Amd1
1923ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
Static meters for active energy (Classes 1 & 2) Staticmeters for active energy (Classes 0.2S & 0.5S) Staticmeters for reactive energy(Classes 2 & 3) Static meters forreactive energy at fundamental frequency ( Classes 0.5 S ,1 S & 1) Static payment meters for active energy ( Classes1 & 2)
Harmonic component incurrent & voltage circuits
IEC: 62052-11: 2003,Amd1 IEC:62053-21: 2003,Amd1 cl.8.2IEC: 62053-22: 2003,Amd1cl.8.2 IEC: 62053-24:2014,Amd1 cl.8.3 IEC:62055-31 :,Amd1 cl.8
1924ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
Static meters for active energy (Classes 1 & 2) Staticmeters for active energy (Classes 0.2S & 0.5S) Staticmeters for reactive energy(Classes 2 & 3) Static meters forreactive energy at fundamental frequency ( Classes 0.5 S ,1 S & 1) Static payment meters for active energy ( Classes1 & 2)
Odd harmonics in ac currentcircuit
IEC: 62052-11: 2003,Amd1 IEC:62053-21: 2003,Amd1 cl.8.2IEC: 62053-24 :2014,Amd1 IEC:62055-31 :,Amd1 cl.8
1925ELECTRICAL- ELECTRICALINDICATING &RECORDINGINSTRUMENTS
Static meters for reactive energy(Classes 2 & 3) Staticmeters for reactive energy at fundamental frequency (Classes 0.5 S , 1 S & 1) Static payment meters for activeenergy ( Classes 1 & 2) CBIP guide on Static Energy meter-No.325
AC High voltage test
IEC: 62053-23,2003,Amd1,cl.7.4 IEC:62053-24 ,2014,Amd1,cl.7.4IEC: 62055-31,2005,Amd1,cl.7.5 CBIPPublication No: 325: cl.5.4.6.3
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 144 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1926ELECTRICAL-ENVIRONMENTAL TESTFACILITY
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEARASSEMBLIES
8.2 Degree of protectionprovided by an ASSEMBLYenclosure 10.3 Degree ofprotection of ASSEMBLIES8.101 Internal separation ofPSC-ASSEMBLIES 8.2.101 PSC-ASSEMBLY with withdrawableparts Electrical tests / No loadrun tests / Functional /Performance Tests andDrawings / Dimensionalverifications
IS/IEC 61439 : PART 1 : 2011IS/IEC 61439 : PART 2 : 2011IEC 61439-1 IEC 61439-2 IEC61439-3 IEC 61439-6 IS andIEC 61439 with latestamendments
1927ELECTRICAL-ENVIRONMENTAL TESTFACILITY
All Types of Measuring Relays and Protection Equipment Mechanical Shock Test & BumpTest IEC 60255-21-2
1928ELECTRICAL-ENVIRONMENTAL TESTFACILITY
All Types of Measuring Relays and Protection Equipment Sine Vibration Test IEC 60255-21-1:
1929ELECTRICAL-ENVIRONMENTAL TESTFACILITY
All types of Electrical, Electronic Instruments, Equipment,components, PCB’s, MCB’s, ACB’s Rack mountedEquipment, Instrument/ Equipment panels and otherarticles
Bump Test - Half sine, Sawtooth, Triangle and Trapezoidpulse
IEC 60068-2-27:2008 IS 9000,Part 7, Section 1: 2006,RA:2016 IS 9000, Part 7,Section 2: 1979, RA:2016 MIL-STD-810H:2019 MIL-STD-202H:201 JSS 55555:2012,JSS 50101:1996, Revsion1 IEC60947-1:2014 IEC 60870-2-2 :1996 IS: 9001 (Part 17/Sec 1 to4) -1985, RA:
1930ELECTRICAL-ENVIRONMENTAL TESTFACILITY
All types of Electrical, Electronic Instruments, Equipment,components, PCB’s, MCB’s, ACB’s Rack mountedEquipment, Instrument/ Equipment panels and otherarticles
Mechanical Shock Test - Halfsine, Saw tooth, Triangle andTrapezoid pulse
IEC 60068-2-27:2008 IS 9000,Part 7, Section 1: 2006,RA:2016 IS 9000, Part 7,Section 2: 1979, RA:2016 MIL-STD-810H:2019 MIL-STD-202H:201 JSS 55555:2012,JSS 50101:1996, Revsion1 IEC60947-1:2014 IEC 60870-2-2 :1996 IS: 9001 (Part 17/Sec 1 to4) -1985, RA
1931ELECTRICAL-ENVIRONMENTAL TESTFACILITY
All types of Electrical, Electronic Instruments, Equipment,components, PCB’s, MCB’s, ACB’s Rack mountedEquipment, Instrument/ Equipment panels and otherarticles
Random Vibration Test
IEC 60068-2-64:2008 MIL-STD-810H:2019 MIL-STD-202H:2015 JSS55555:2012 JSS 50101:1996,Revsion1 MIL-HDBK-2164A
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 145 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1932ELECTRICAL-ENVIRONMENTAL TESTFACILITY
All types of Electrical, Electronic Instruments, Equipment,components, PCB’s, MCB’s, ACB’s Rack mountedEquipment, Instrument/ Equipment panels and otherarticles
Sine Vibration Test
IEC 60068-2-6:2007 IS 9000,Part 8:1981, RA:2018 MIL-STD-810H:2019, MIL-STD-202H:2015 JSS55555:2012 JSS 50101:1996,Revsion1 IEC 60947-1:2014 IEC60870-2-2 : 1996 IEC60721-3-3 :1996 IS: 9001 (Part13) -1981, RA
1933ELECTRICAL-ENVIRONMENTAL TESTFACILITY
All types of Electrical, Electronic Instruments, Equipment,components, PCB’s, MCB’s, ACB’s Rack mountedEquipment, Instrument/ Equipment panels, Relays andother articles
Cold (Low Temperature) TestIEC 60068-2-1:2007 IS 9000,Part 2, Section 1 to 4:1977,RA:2016 IEC 60571: 2012 JSS55555:
1934ELECTRICAL-ENVIRONMENTAL TESTFACILITY
All types of Electrical, Electronic Instruments, Equipment,components, PCB’s, MCB’s, ACB’s Rack mountedEquipment, Instrument/ Equipment panels, Relays andother articles
Composite Temperature ,Humidity Test, and Damp heattest
IEC 60068-2-30:2005 IS 9000,Part 5, Section 1 & 2:1981, RA:2016 IEC 60068-2-78:2012 IS9000, Part 4:2008, RA:2018 IEC60571: 2012 JSS 55555:
1935ELECTRICAL-ENVIRONMENTAL TESTFACILITY
All types of Electrical, Electronic Instruments, Equipment,components, PCB’s, MCB’s, ACB’s Rack mountedEquipment, Instrument/ Equipment panels, Relays andother articles
Dry Heat (High Temperature)Test
IEC 60068-2-2:2007 IS 9000,Part 3, Section 1 to 5:1977,RA:2016 IEC 60571: 2012 JSS55555
1936ELECTRICAL-ENVIRONMENTAL TESTFACILITY
All types of Electrical, Electronic Instruments, Equipment,components, PCB’s, MCB’s, ACB’s Rack mountedEquipment, Instrument/ Equipment panels, Relays andother articles
Temperature Cycling Test &Change of temperature test
IEC 60068-2-14:2009 IS : 9000,Part 6:1978, RA:2016 IS : 9000(Part 14/Sec 1 to 3)-1988(Reaffirmed 2018) JSS 55555
1937ELECTRICAL-ENVIRONMENTAL TESTFACILITY
All types of Electrical, Electronic Instruments, Equipment,components, PCB’s, MCB’s, ACB’s Rack mountedEquipment, Instrument/ Equipment panels, Rolling Stockequipment for Railway applications and other articles
Bump Test -Half sine, Sawtooth, Triangle and Trapezoidpulse
IEC 60068-2-27:2008 IEC60947-1:2014 IEC 60870-2-2 :1996 IS 9000, Part 7, Section1: 2006, RA:2016 IS 9000, Part7, Section 2: 1979, RA:2016IEC 61373:2010 JSS 55555
1938ELECTRICAL-ENVIRONMENTAL TESTFACILITY
All types of Electrical, Electronic Instruments, Equipment,components, PCB’s, MCB’s, ACB’s Rack mountedEquipment, Instrument/ Equipment panels, Rolling Stockequipment for Railway applications and other articles
Mechanical Shock Test - Halfsine, Saw tooth, Triangle andTrapezoid pulse
IEC 60068-2-27:2008 IEC60947-1:2014 IEC 60870-2-2 :1996 IS 9000, Part 7, Section1: 2006, RA:2016 IS 9000, Part7, Section 2: 1979, RA:2016IEC 61373:2010 JSS 55555
1939ELECTRICAL-ENVIRONMENTAL TESTFACILITY
All types of Electrical, Electronic Instruments, Equipment,components, PCB’s, MCB’s, ACB’s Rack mountedEquipment, Instrument/ Equipment panels, Rolling Stockequipment for Railway applications and other articles
Random Vibration TestIEC 60068-2-64:2008 IEC61373:2010 IEC 60571: 2012ASTM D 4169 ASTM D 880ASTM D 4728
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 146 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1940ELECTRICAL-ENVIRONMENTAL TESTFACILITY
All types of Electrical, Electronic Instruments, Equipment,components, PCB’s, MCB’s, ACB’s Rack mountedEquipment, Instrument/ Equipment panels, Rolling Stockequipment for Railway applications and other articles
Sine Vibration Test
IEC 60068-2-6:2007 IEC62271-1:2017 IEC60947-1:2014 IEC 60870-2-2 :1996 IEC 60721-3-3 :1996 JSS55555:2012, Test No.28 IS9000, Part 8:1981, RA:2018ASTM D 999
1941ELECTRICAL-ENVIRONMENTAL TESTFACILITY
All types of Electrical, Electronic Instruments, Equipment,Control and Relay Panels, Mechanical Components,Structures and other articles
Sine Vibration Test, SeismicQualification Test (Tri-axial)
IEEE 344:2013 IEC 60980:1989IEC 60068-3-3:1991 IEC60068-2-57: 2013, IEEE StdC37.81:
1942ELECTRICAL-ENVIRONMENTAL TESTFACILITY
All types of Electrical, Electronic Instruments, Equipment,Relays, Relay Panels, Mechanical Components, Structuresand other articles
Sine Vibration Test, SeismicQualification Test (Uni-axial)
IEEE 344:2013 IEC 60980:1989IEC 60068-3-3:1991 IEC60255-21-3:1993 IEC60068-2-57:
1943ELECTRICAL-ENVIRONMENTAL TESTFACILITY
All types of Enclosures Ingress Protection-X9IEC60529:1989+AMD1:1999+AMD2:2013, IEC60529(Ed.2.2)-2013-08:
1944ELECTRICAL-ENVIRONMENTAL TESTFACILITY
All Types of Energy Meters, Watthour meters, Trivectormeters, Panel Meters, Smart meters, Prepaid meters (1phase, 3 phase)
Sine Vibration Test,
IEC62052-11:2003+AMD1:2016IEC62053-11:2003+AMD1:2016IEC62053-21:2003+AMD1:2016IEC62053-22:2003+AMD1:2016IEC 62052-31:2015 IEC62053-24:2014+A1:2016 IEC62055-31:2005 IS13010:2002+AMD 1 and 2,RA:2017 IS 13779:1999+AMD1, 2, 3, 4 & 5,RA:2014 IS14697:1999+AMD 1, 2, 3 & 4,RA:2014 IS 15884 : 2010, RA2016 IS 16444 (PART 1) : 2015IS 16444 (PART 2) : 2017 CBIPTR 325:
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 147 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1945ELECTRICAL-ENVIRONMENTAL TESTFACILITY
All Types of Energy Meters, Watthour meters, Trivectormeters, Panel Meters, Smart meters, Prepaid meters (1phase, 3 phase)
Mechanical shock test
IEC62052-11:2003+AMD1:2016IEC62053-11:2003+AMD1:2016IEC62053-21:2003+AMD1:2016IEC62053-22:2003+AMD1:2016IEC 62052-31:2015 IEC62053-24:2014+A1:2016 IEC62055-31:2005 IS13010:2002+AMD 1 and 2,RA:2017 IS 13779:1999+AMD1, 2, 3, 4 & 5,RA:2014 IS14697:1999+AMD 1, 2, 3 & 4,RA:2014 IS 15884 : 2010, RA2016 IS 16444 (PART 1) : 2015IS 16444 (PART 2) : 2017 CBIPTR 325::
1946ELECTRICAL-ENVIRONMENTAL TESTFACILITY
All types of Substation Equipment and structures Sine Vibration Test, SeismicQualification Test (Tri-axial)
IEEE 693:2018 IEC TR62271-300: 2006 IEC TS62271-210: 2013 IEC62271-207:2012 IEC TS61463:2016 IEC60068-3-3:1991 IEC60068-2-57: 2013 IS1893, Part1& Part 4: 2002, RA:2012 ICC-ES AC 156:2010 IEC61587-2:2011 Telcordia GR-63-Core(Zone 1 to zone 3), IEC61587-5:2013 IEC 60255-21-3(bi-axial)
1947ELECTRICAL-ENVIRONMENTAL TESTFACILITY
AUTOMATIC POWER FACTOR CORRECTION (APFC) PANELSFOR VOLTAGE RATING UP TO AND INCLUDING 1 000 V
5.14 Verification of the Degreeof Protection of Enclosure, testranging from IP 1X to IP 6Xtests test ranging from IP X1 toIP X8. Electrical tests / No loadrun tests / Functional /Performance Tests andDrawings / Dimensionalverifications
IS 16636
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 148 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1948ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Ball pressure test Ball pressure test
IEC 60695-10-2:2003, IS/IEC60898-1: 2015 IS/IEC 60898-2:2003 (RA : 2017) IEC 60898-1 :2015 IEC 60898-2 : 2016,IS/IEC 61008-1 IS 12640 : Part1 : 2016 IS 12640 : Part 2 :2016 IS/IEC 61009-1 IEC 60755: 2017 IEC 61008-1 : 2013 IEC61008-2-1 : 1990 IEC61008-2-2 : 1990 IEC 61009-1 :2013 IEC 61009-2-1 : 1991 IEC61009-2-2 :
1949ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Battery Sine Vibration Test IS 7624 :1990, RA 2014 IS13568 :1992, RA
1950ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Capacitor Sine Vibration Test, Shock test IS 2993 : 1998/ IEC 252 (1993)IEC 61071:2017 IEC 60252-1
1951ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Cold test Cold test IS 9000 Part 2:1977(RA
1952ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Damp Heat (Cyclic) test Damp Heat (Cyclic) test IEC 60068-3-1:2011 IS 9000Part 5 : 1981 (RA
1953ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Damp Heat (Steady State) test Damp Heat (Steady State) test IEC 60068-2-30:2005 IS 9000Part 4 :2008(RA
1954ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Dry Heat test Dry Heat testIS 9000 Part 3:1977(RA 2016)IEC 60068-2-2:2007 IEC60068-2-14
1955ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Electrical / electronic equipment, Substation equipment,Low voltage and high voltage indoor / outdoor switchgearand controlgears, Circuit breakers, Relay, Electrical andElectronic Instruments, Control panels, Relay Panels,Distribution boards, RMU panels, Transformers, Bus ducts,Battery charger, Telecommunication equipment
Insulation resistance test
IEC 61439-1:2011,IEC61439-6:2012,IEC60947-1:2014,IEC60571:2012,IEEE 344:2013,IEEE 693:
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 149 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1956ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Electrical / electronic equipment: Substation equipment,Low voltage and high voltage indoor / outdoor switchgearand controlgears, Circuit breakers, Relay, Electrical andElectronic Instruments, Control panels, Relay Panels,Distribution boards, RMU panels, Transformers, Bus ducts,Battery charger, Telecommunication equipment
Chatter monitoring /monitoring change of status ofcircuit
IEC 62271-1:2017 IEC62271-100:2017 IEC62271-200:2011 IEC62271-201:2014 IEC62271-203:2011 IEC61439-1:2011 IEC61439-6:2012, IEC60255-21-1:1988 IEC60255-21-2:1988 IEC60255-21-3:1993,IEC TR62271-300: 2006 IEC TS62271-210: 2013 IEC62271-207:2012 IEEE344:2013 IEEE 693
1957ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Electrical / electronic equipment: Substation equipment,Low voltage and high voltage indoor / outdoor switchgearand controlgears, Circuit breakers, Relay, Electrical andElectronic Instruments, Control panels, Relay Panels,Distribution boards, RMU panels, Transformers, Bus ducts,Battery charger, Telecommunication equipment
Dielectric test/ High voltagepower frequency test/Voltagetest as conditional check
IEC 62271-1:2017 IEC62271-100:2017 IEC62271-200:2011 IEC62271-201:2014 IEC62271-203:2011 IEC61439-1:2011 IEC61439-6:2012 IEC60060-1:2010 IEC 60571:2012IEC 60947-1:2014 IEEEC37.23:2015, IEEE 344:2013,IEEE 693:
1958ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Electrical / electronic equipment: Substation equipment,Low voltage and high voltage indoor / outdoor switchgearand controlgears, Circuit breakers, Relay, Electrical andElectronic Instruments, Control panels, Relay Panels,Distribution boards, RMU panels, Transformers, Bus ducts,Battery charger, Telecommunication equipment
Functional check/Operationalcheck
IEC 62271-1:2017 IEC62271-100:2017 IEC62271-200:2011 IEC62271-201:2014 IEC62271-203:2011 IEC61439-1:2011 IEC61439-6:2012,IEC TR62271-300: 2006 IEC TS62271-210: 2013 IEC62271-207:2012 IEEE344:2013 IEEE 693
1959ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Electrical / electronic equipment: Substation equipment,Low voltage and high voltage indoor / outdoor switchgearand controlgears, Circuit breakers, Relay, Electrical andElectronic Instruments, Control panels, Relay Panels,Distribution boards, RMU panels, Transformers, Bus ducts,Battery charger, Telecommunication equipment
Resistancemeasurement/Measurement ofthe resistance of the circuits/contact resistancemeasurement
IEC 62271-1:2017 IEC62271-100:2017 IEC62271-200:2011 IEC62271-201:2014 IEC62271-203:2011 IEC61439-1:2011 IEC61439-6:2012,IEC60947-1:2014 IEEE C37.23:
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 150 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1960ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Electrical / electronic equipment: Substation equipment,Low voltage and high voltage indoor / outdoor switchgearand controlgears, Circuit breakers, Relay, Electrical andElectronic Instruments, Control panels, Relay Panels,Distribution boards, RMU panels, Transformers, Bus ducts,Battery charger, Telecommunication equipment
Voltage monitoring/ Voltagemeasurement
IEC 62271-1:2017 IEC62271-100:2017 IEC62271-200:2011 IEC62271-201:2014 IEC62271-203:2011 IEC61439-1:2011 IEC61439-6:2012, IEC TS62271-210: 2013 IEC62271-207:2012 IEEE344:2013 IEEE 693
1961ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Energy meters, Watthour meters, Trivector meters AC POWER FREQUENCYVOLTAGE TEST CL 6.10.4.3.4 IEC 62052-31
1962ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Energy meters, Watthour meters, Trivector meters INSULATION RESISTANCE TEST CL 11.2 IS 13010 : 2002
1963ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Energy meters, Watthour meters, Trivector meters INSULATION RESISTANCE TEST cl 12.7.6.4 IS 13779 :1999 RA
1964ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Energy meters, Watthour meters, Trivector meters INSULATION RESISTANCE TEST CL 12.7.6.4 IS 14697:1999
1965ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Energy meters, Watthour meters, Trivector meters Insulation resistance test CL 5.4.6.4 IS 15884 :2010 RA
1966ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Energy meters, Watthour meters, Trivector meters INSULATION RESISTANCE TEST CL 7.3 IEC 62052-11
1967ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Energy meters, Watthour meters, Trivector meters Mechanical Requirements CL 5 IEC 62053-23
1968ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Energy meters, Watthour meters, Trivector meters Mechanical Requirements CL 5 IEC 62053-21
1969ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Energy meters, Watthour meters, Trivector meters Mechanical Requirements CL 5 IEC 62053-22
1970ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Energy meters, Watthour meters, Trivector meters Mechanical Requirements CL 5 IEC 62053-24
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 151 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1971ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Energy meters, Watthour meters, Trivector meters Mechanical Requirements CL 6.5 IS 16444
1972ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Energy meters, Watthour meters, Trivector meters Mechanical Requirements CL 6.5 IS 16444 PART 2
1973ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Energy meters, Watthour meters, Trivector meters Protection Against Penetrationof Dust and Wate CL 5.10 IEC 62055-31
1974ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Energy meters, Watthour meters, Trivector meters Protection Against Penetrationof Dust and Water CL 11.24 IS 13010 : 2002
1975ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Energy meters, Watthour meters, Trivector metersPROTECTION AGAINSTPENETRATION OF DUST ANDWATER
CL 5.9 IEC 62052-11
1976ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Energy meters, Watthour meters, Trivector meters Protection Against Penetrationof Dust and Water CL 5.9 IEC 62052-11:2003
1977ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Energy meters, Watthour meters, Trivector metersPROTECTION AGAINSTPENETTRATION OF DUST ANDWATER
CL 6.9 & 12.5 IS 14697:1999
1978ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Energy meters, Watthour meters, Trivector meters Test of Protection AgainstPenetration of Dust and Water CL 11 IEC 62052-31
1979ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Energy meters, Watthour meters, Trivector meters Test ofProtection AgainstPenetration of Dust and Water. cl 12.5 IS 13779 :1999 RA
1980ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Energy meters, Watthour meters, Trivector meters Tests of Protection AgainstPenetration of Dust and Water CL 5.2.5 IS 15884 :2010 RA
1981ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Environmental Test Facility Dry Heat Test IEC 60068-2-2
1982ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Environmental Test Facility Damp Heat Cyclic Test IEC 60068-2-30:
1983ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Environmental testing of equipment Environmental test- Cold test IEC 60068-2 cl.5,6, IS 9000(part 2)
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 152 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1984ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Environmental testing of equipment Environmental test- Cold testIEC 60068-2- 1 Ed6.0(2007-03)(Cl.5,6) IS 9000 (Part-II) Sec. 1 to 4
1985ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Environmental testing of equipmentEnvironmental test- compositetemperature-Humidity cycletest
IS 9000 part 6 2004, IEC60068-2
1986ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Environmental testing of equipment Environmental test- DampHeat cyclic
IEC 60068-2-30 2005 cl.5.6, IS9000 (part 5)
1987ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Environmental testing of equipment Environmental test- DampHeat steady state
IEC 60068-2-78 2012 cl.4.5, IS9000 (part 4)
1988ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Environmental testing of equipment Environmental test- Dry Heat IEC 60068-2-14 2009-01 cl.7,8IS 9000 (part-14)
1989ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Environmental testing of equipment Environmental test- Dry Heat IEC 60068-2-2 2007-07 cl.5.6,IS 9000 part 3
1990ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Glow wire Glow wireISO 4628-3:2003 IS 11000(Part 2/Sec 1): 2008(RA 2016)IEC 60695-2-10-2013 IEC60695-2-11-
1991ELECTRICAL-ENVIRONMENTAL TESTFACILITY
High voltage AC Circuit breakers High temperature test onvacuum circuit breaker
IEC 62271-12011-08,Cl.6.101.3&4- IEC62271-100
1992ELECTRICAL-ENVIRONMENTAL TESTFACILITY
High voltage AC circuit breakers Low temperature test onvacuum circuit breaker
IEC 62271-1 2011-08, IEC62271-100 cl.6.101.3
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 153 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1993ELECTRICAL-ENVIRONMENTAL TESTFACILITY
HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR
5.13.1 Protection of personsagainst access to hazardousparts and protection of theequipment against ingress ofsolid foreign objects 5.13.2Protection against ingress ofwater 5.13 DoP by enclosures5.13.1 Protection of personsagainst access to hazardousparts and protection of theequipment against ingress ofsolid foreign objects 5.13.2Protection against ingress ofwater 6.14.2 Protection ofpersons against access tohazardous parts and protectionof the equipment againstingress of
IS/IEC 62271 : PART 1 IS/IEC62271-100 IS/IEC 62271-200IEC 62271-200 IEC 62271 :PART 1 IS and IEC 62271
1994ELECTRICAL-ENVIRONMENTAL TESTFACILITY
indoor / outdoor switchgear and controlgears, Circuitbreakers, RMU.
Circuit breaker no load openingtime, closing time, openingvelocity, closing velocitymeasurement
IEC 62271-1:2017 IEC62271-100:2017 IEC62271-200:2011 IEC62271-201:2014 IEC62271-203:
1995ELECTRICAL-ENVIRONMENTAL TESTFACILITY
indoor / outdoor switchgear and controlgears, Circuitbreakers,RMU Gas/Liquid tightness tests
IEC 62271-1:2017 IEC62271-100:2017 IEC62271-200:2011 IEC62271-201:2014 IEC62271-203
1996ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Ingress Protection tests for all Types of rotating electricalmachinery equipment enclosures of induction Motor, WallActuators, DC Machines, AC Machines, Alternators,Generators, Vibratory Electric Motors, Large Motors,Automobile Electrical Motors, Traction Motors, Power ToolsMotors, Pumps(Motors), etc,
Degree of Protection tests forall rotating electricalequipment enclosures meantfor use in dusty and moistareas. Which includes theDegree of protection tests for –First numeral degree ofprotection ranging from IP 1Xto IP 6X tests and Secondnumeral degree of protectionranging from IP X1 to IP X8tests, Electrical tests / No loadrun tests / Functional /Performance Tests andDrawings / Dimensionalverifications.
IS/ IEC 60034-5 2000, IEC60034-5
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 154 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1997ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Ingress protection tests for electrical equipmentenclosures, outdoor distribution boards. Relay units/panels. Control cubicles for PCVCB, switching and ControlSystem Enclosures, RMU Panels, HT metering and switchingpanels, AC Distribution Board, EWM Enclosure, Platformpower supply, LT Panel, disconnecting switch assemblyconsulate, Junction Boxes, LV Switch Board, AC/DC Panel,Weather proof switch Enclosure, Dry Type TransformerEnclosure, PCC Panel. MCC Panel, Bus Ducts, DOL Starter,Integral Starter, Control Panels, Electricity meteringequipment enclosures, Actuators, Telecom equipmentenclosures, Antennas, Cables, Connector Assembly, GPRSEquipment enclosures, Battery charge Panels, MedicalHealth Monitoring Equipment enclosures, Drive MechanismBox, Marshalling Kiosks, Surge monitors, MOMs, Belt swayswitch enclosures, Reactor Assembly enclosures, StarterMotors, Soft starters Panels, RAPCONS, BAPCONS
Protection against access tohazardous parts indicated bythe additional letter testranging from A to D
CL 15 IEC:60529, Edn 2.2:2013-08: 2013
1998ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Ingress protection tests for electrical equipmentenclosures, outdoor distribution boards. Relay units/panels. Control cubicles for PCVCB, switching and ControlSystem Enclosures, RMU Panels, HT metering and switchingpanels, AC Distribution Board, EWM Enclosure, Platformpower supply, LT Panel, disconnecting switch assemblyconsulate, Junction Boxes, LV Switch Board, AC/DC Panel,Weather proof switch Enclosure, Dry Type TransformerEnclosure, PCC Panel. MCC Panel, Bus Ducts, DOL Starter,Integral Starter, Control Panels, Electricity meteringequipment enclosures, Actuators, Telecom equipmentenclosures, Antennas, Cables, Connector Assembly, GPRSEquipment enclosures, Battery charge Panels, MedicalHealth Monitoring Equipment enclosures, Drive MechanismBox, Marshalling Kiosks, Surge monitors, MOMs, Belt swayswitch enclosures, Reactor Assembly enclosures, StarterMotors, Soft starters Panels, RAPCONS, BAPCONS, etC
Protection against solid foreignobjects indicated by the firstcharacteristic numeral ) testranging from IP 1X to IP 6Xtests
CL 13IEC:60529, Edn 2.2:2013-08: 2013
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 155 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
1999ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Ingress protection tests for electrical equipmentenclosures: Outdoor distribution boards. Relay units/panels. Control cubicles for PCVCB, switching and ControlSystem Enclosures, RMV Panels, HT metering and switchingpanels, AC Distribution Board, EWM Enclosure, Platformpower supply, LT Panel, disconnecting switch assemblyCondulate, Junction Boxes, LV Switch Board, AC/DC Panel,Weatherproof switch Enclosure, Dry Type TransformerEnclosure, PCC Panel. MCC Panel, Bus Ducts, DOL Starter,Integral Starter, Control Panels, Electricity meteringequipment enclosures, Actuators, Telecom equiptenclosures, Antennas, Cables, Connector Assembly, GPRSEquipment enclosures, Battery charge Panels, MedicalHealth Monitoring Equipment enclosures, Drive MechanismBox, Marshalling Kiosks, Surge monitors, MOMs, Belt swayswitch enclosures, Reactor Assembly enclosures, StarterMotors, Soft starters Panels, RAPCONS, BAPCONS, etc
Degree of Protection tests forall the electrical equipmentenclosures meant for use industy and moist areas – whichincludes the Degree ofprotection tests for – Firstnumeral degree of protectionranging from IP 1X to IP 6Xtests and Second numeraldegree of protection rangingfrom IP X1 to IP X8 tests, alongwith IP 51 and IP 54 tests forEnergy Metres Electrical tests /No load run tests / Functional /Performance Tests andDrawings / Dimensionalverifications.
IS/ IEC 60529 2001, IS/IEC60529 2013, IS/ IEC 60947-12007, IEC 61439-1 2011, IS13779 2004, IS 14679 2004,IEC 62052-11
2000ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Ingress protection tests for electrical equipmentenclosures: Outdoor distribution boards. Relay units/panels. Control cubicles for PCVCB, switching and ControlSystem Enclosures, RMU Panels, HT metering and switchingpanels, AC Distribution Board, EWM Enclosure, Platformpower supply, LT Panel, disconnecting switch assemblyconsulate, Junction Boxes, LV Switch Board, AC/DC Panel,Weather proof switch Enclosure, Dry Type TransformerEnclosure, PCC Panel. MCC Panel, Bus Ducts, DOL Starter,Integral Starter, Control Panels, Electricity meteringequipment enclosures, Actuators, Telecom equipmentenclosures, Antennas, Cables, Connector Assembly, GPRSEquipment enclosures, Battery charge Panels, MedicalHealth Monitoring Equipment enclosures, Drive MechanismBox, Marshalling Kiosks, Surge monitors, MOMs, Belt swayswitch enclosures, Reactor Assembly enclosures, StarterMotors, Soft starters Panels, RAPCONS, BAPCONS, etc
Protection against access tohazardous parts indicated bythe additional letter testranging from A to D
CL 15 IS/IEC 60529 : 2001
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 156 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2001ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Ingress protection tests for Electrical equipmentenclosures: Outdoor distribution boards. Relay units/panels. Control cubicles for PCVCB, switching and ControlSystem Enclosures, RMU Panels, HT metering and switchingpanels, AC Distribution Board, EWM Enclosure, Platformpower supply, LT Panel, disconnecting switch assemblyconsulate, Junction Boxes, LV Switch Board, AC/DC Panel,Weather proof switch Enclosure, Dry Type TransformerEnclosure, PCC Panel. MCC Panel, Bus Ducts, DOL Starter,Integral Starter, Control Panels, Electricity meteringequipment enclosures, Actuators, Telecom equipmentenclosures, Antennas, Cables, Connector Assembly, GPRSEquipment enclosures, Battery charge Panels, MedicalHealth Monitoring Equipment enclosures, Drive MechanismBox, Marshalling Kiosks, Surge monitors, MOMs, Belt swayswitch enclosures, Reactor Assembly enclosures, StarterMotors, Soft starters Panels, RAPCONS, BAPCONS, etc
Protection against access tohazardous parts indicated bythe first characteristic numeraltest ranging from IP 1X to IP 6Xtests
CL 12 IEC:60529, Edn 2.2:2013-08
2002ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Ingress protection tests for electrical equipmentenclosures: Outdoor distribution boards. Relay units/panels. Control cubicles for PCVCB, switching and ControlSystem Enclosures, RMU Panels, HT metering and switchingpanels, AC Distribution Board, EWM Enclosure, Platformpower supply, LT Panel, disconnecting switch assemblyconsulate, Junction Boxes, LV Switch Board, AC/DC Panel,Weather proof switch Enclosure, Dry Type TransformerEnclosure, PCC Panel. MCC Panel, Bus Ducts, DOL Starter,Integral Starter, Control Panels, Electricity meteringequipment enclosures, Actuators, Telecom equipmentenclosures, Antennas, Cables, Connector Assembly, GPRSEquipment enclosures, Battery charge Panels, MedicalHealth Monitoring Equipment enclosures, Drive MechanismBox, Marshalling Kiosks, Surge monitors, MOMs, Belt swayswitch enclosures, Reactor Assembly enclosures, StarterMotors, Soft starters Panels, RAPCONS, BAPCONS, etc
Protection against solid foreignobjects indicated by the firstcharacteristic numeral testranging from IP 1X to IP 6Xtests
CL 13IS/IEC 60529 : 2001 RA
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 157 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2003ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Ingress protection tests for electrical equipmentenclosures: Outdoor distribution boards. Relay units/panels. Control cubicles for PCVCB, switching and ControlSystem Enclosures, RMU Panels, HT metering and switchingpanels, AC Distribution Board, EWM Enclosure, Platformpower supply, LT Panel, disconnecting switch assemblyconsulate, Junction Boxes, LV Switch Board, AC/DC Panel,Weather proof switch Enclosure, Dry Type TransformerEnclosure, PCC Panel. MCC Panel, Bus Ducts, DOL Starter,Integral Starter, Control Panels, Electricity meteringequipment enclosures, Actuators, Telecom equipmentenclosures, Antennas, Cables, Connector Assembly, GPRSEquipment enclosures, Battery charge Panels, MedicalHealth Monitoring Equipment enclosures, Drive MechanismBox, Marshalling Kiosks, Surge monitors, MOMs, Belt swayswitch enclosures, Reactor Assembly enclosures, StarterMotors, Soft starters Panels, RAPCONS, BAPCONS, etc
Protection against waterindicated by the secondcharacteristic numeral testranging from IP X1 to IP X8
CL 14 IEC:60529, Edn 2.2:2013-08: 2013
2004ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Ingress protection tests for electrical equipmentenclosures: Outdoor distribution boards. Relay units/panels. Control cubicles for PCVCB, switching and ControlSystem Enclosures, RMU Panels, HT metering and switchingpanels, AC Distribution Board, EWM Enclosure, Platformpower supply, LT Panel, disconnecting switch assemblyconsulate, Junction Boxes, LV Switch Board, AC/DC Panel,Weather proof switch Enclosure, Dry Type TransformerEnclosure, PCC Panel. MCC Panel, Bus Ducts, DOL Starter,Integral Starter, Control Panels, Electricity meteringequipment enclosures, Actuators, Telecom equipmentenclosures, Antennas, Cables, Connector Assembly, GPRSEquipment enclosures, Battery charge Panels, MedicalHealth Monitoring Equipment enclosures, Drive MechanismBox, Marshalling Kiosks, Surge monitors, MOMs, Belt swayswitch enclosures, Reactor Assembly enclosures, StarterMotors, Soft starters Panels, RAPCONS, BAPCONS, etc
Protection against waterindicated by the secondcharacteristic numeral testranging from IP X1 to IP X8
CL 14 IS/IEC 60529 : 2001 RA
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 158 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2005ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Ingress protection tests for electrical equipmentenclosures: outdoor distribution boards. Relay units/panels. Control cubicles for PCVCB, switching and ControlSystem Enclosures, RMU Panels, HT metering and switchingpanels, AC Distribution Board, EWM Enclosure, Platformpower supply, LT Panel, disconnecting switch assemblyconsulate, Junction Boxes, LV Switch Board, AC/DC Panel,Weather proof switch Enclosure, Dry Type TransformerEnclosure, PCC Panel. MCC Panel, Bus Ducts, DOL Starter,Integral Starter, Control Panels, Electricity meteringequipment enclosures, Actuators, Telecom equipmentenclosures, Antennas, Cables, Connector Assembly, GPRSEquipment enclosures, Battery charge Panels, MedicalHealth Monitoring Equipment enclosures, Drive MechanismBox, Marshalling Kiosks, Surge monitors, MOMs, Belt swayswitch enclosures, Reactor Assembly enclosures, StarterMotors, Soft starters Panels, RAPCONS, BAPCONS, etc
Tests for protection againstaccess to hazardous partsindicated by the firstcharacteristic numeral testranging from IP 1X to IP 6Xtests
CL 12IS/IEC 60529 : 2001 RA
2006ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Ingress Protection tests for luminaries and lighting fittingequipment enclosures: Street Light Fitting Enclosures,Aviation Lights fitting Enclosures, Domestic and IndustrialLight Fitting Enclosures, Railway Light Enclosures, Corridor /Office Light Fitting Enclosures, Solar Light FittingEnclosures, etc.
Degree of Protection tests forlighting / luminaire enclosuresmeant for use in dusty andmoist areas. Which includesfirst numeral degree ofprotection test for Solid objectproof luminaries (IP 2X, 3X and4X); Dust proof luminary(IP5X), Dust tight luminary (IP6X ) Second numeral degree ofprotection tests for drip proof,Rain Proof (IPX1 and IPX2),Splash proof(IPX3 and IPX4),Jet proof (IPX5 and IPX6),Water tight (IPX7) and pressurewater tight tests(IPX8) alongwith electrical streng
IS 10322 part 4 2005, IEC60598-1
2007ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Ingress Protection tests for rotating electrical machineryequipment enclosures: Enclosures of induction Motor, WallActuators, DC Machines, AC Machines, Alternators,Generators, Vibratory Electric Motors, Large Motors,Automobile Electrical Motors, Traction Motors, Power ToolsMotors, Pumps(Motors), etc
Cl 8- tests for firstcharacteristic numeral rangingfrom IP 1X to IP 6X tests andcl.9 – tests for Second numeraldegree of protection rangingfrom IP X1 to IP X8 tests,Electrical tests / No load runtests / Functional /Performance Tests andDrawings / Dimensionalverifications
IS/ IEC:60034-5 :2000IEC:60034-5 Edition 4.1,2006-11, protection shall beverified in accordance with IS /IEC 60529
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 159 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2008ELECTRICAL-ENVIRONMENTAL TESTFACILITY
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR -SPECIFICATION - PART 5 : CONTROL CIRCUIT DEVICES ANDSWITCHING ELEMENTS - SECTION 2 : PROXIMITY SWITCHES
7.1.11 Degrees of protection ofenclosed equipment tests asper Appendix C. 7.1.10 Degreeof protection 8.2 Compliancewith constructionalrequirements Electrical tests /No load run tests / Functional /Performance Tests andDrawings / Dimensionalverifications
IS 13947: PART1 IS 13947 :PART 5 : SEC 2 IS and IEC60947 with latest amendments
2009ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Low-voltage switchgear and controlgear – Part 1: Generalrules Part 2: Circuit-breakers Part 3: Switches,disconnectors, switch-disconnectors and fuse-combinationunits
8.2.3 Enclosures forequipment- the degrees ofprotection of enclosedequipment as in Annex C.Electrical tests / No load runtests / Functional /Performance Tests andDrawings / Dimensionalverifications
IEC 60947-1: 2014 IEC60947-2: 2016 IEC 60947-3:2015 IS and IEC 60947 withlatest amendments
2010ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Model capacitors of grading capacitor Tightness test at differenttemperatures IEC 62146-1 cl.8.9
2011ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Model capacitors of grading capacitor Tightness test at differenttemperatures IEC 62146-1 cl.8.9
2012ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Photovoltaic Crystalline Silicon Terrestrial Photovoltaic (PV)Modules Design Qualification and Type Approval (Max po
Thermal cycling test (2.5 * 2M* 2M)
IS 14286:2010 Cl. 10.11: RA2015/ IEC 61215-2 (Cl. 4.11)
2013ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Photovoltaic Crystalline Silicon Terrestrial Photovoltaic (PV)Modules Design Qualification and Type Approval (Maxpower 600 W)
Damp heat test (2.5 * 2M * 2M) IS 14286: 2010 Cl. 10.13: RA2015/ IEC 61215-2 (Cl. 4.13)
2014ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Photovoltaic Crystalline Silicon Terrestrial Photovoltaic (PV)Modules Design Qualification and Type Approval (Maxpower 600 W)
Damp heat test (2.5 * 2M * 2M) IS 14286: 2010 Cl. 10.13: RA2015/ IEC 61215-2 (Cl. 4.13)
2015ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Photovoltaic Crystalline Silicon Terrestrial Photovoltaic (PV)Modules Design Qualification and Type Approval (Maxpower 600 W)
Humidity Freeze Test (2.5 * 2M* 2M)
IS 14286: 2010 Cl. 10.12 : RA2015/ IEC 61215-2 (Cl 4.12)
2016ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Photovoltaic Crystalline Silicon Terrestrial Photovoltaic (PV)Modules Design Qualification and Type Approval (Maxpower 600 W)
Humidity Freeze Test (2.5 * 2M* 2M)
IS 14286: 2010 Cl. 10.12 : RA2015/ IEC 61215-2 (Cl. 4.12)
2017ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Photovoltaic Crystalline Silicon Terrestrial Photovoltaic (PV)Modules Design Qualification and Type Approval (Maxpower 600 W)
Robustness of termination testIS 14286: 2010 Cl. 10.14: RA2015/ IEC 61215-2 (Clause No.4.14)
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 160 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2018ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Photovoltaic Crystalline Silicon Terrestrial Photovoltaic (PV)Modules Design Qualification and Type Approval (Maxpower 600 W)
Salt mist corrosion test IS/ IEC 61701(Cl .7) 2011/RA
2019ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Photovoltaic Crystalline Silicon Terrestrial Photovoltaic (PV)Modules Design Qualification and Type Approval (Maxpower 600 W)
Salt mist corrosion test IS/ IEC 61701(Cl .7) 2011/RA
2020ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Photovoltaic Crystalline Silicon Terrestrial Photovoltaic (PV)Modules Design Qualification and Type Approval (Maxpower 600 W)
Salt mist corrosion test IS/ IEC 61701(Cl .7) 2011/RA
2021ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Photovoltaic Crystalline Silicon Terrestrial Photovoltaic (PV)Modules Design Qualification and Type Approval (Maxpower 600 W)
Thermal cycling test (2.5 * 2M* 2M)
IS 14286 :2010 Cl. 10.11:RA2015 / IEC 61215-2 (Cl. 4.11)
2022ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Photovoltaic Crystalline Silicon Terrestrial Photovoltaic (PV)Modules Design Qualification and Type Approval (Maxpower 600 W)
UV Precondition test (2.5 M x1.5 M x 30 M)
IS 14286 Cl. 10.10: RA 2015/IEC 61215-2 (Cl. 4.10)
2023ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Photovoltaic Crystalline Silicon Terrestrial Photovoltaic (PV)Modules Design Qualification and Type Approval (Maxpower 600 W)
UV Precondition test (2.5 M x1.5 M x 30 M)
IS 14286:2010 CL. 10.10 :RA2015/ IEC 61215-2 (CL. 4.10)
2024ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Polymeric Outdoor HV Insulator Accelerated Weathering Test IEC 61109 2008, IEC 62217
2025ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Power Condition unit Safety of power converters for use inphotovoltaic power systems Part 1: General Requirements
Temperature andHumidity(Room conditioning)
IS 16221-1:2016 / IEC 62109-1Cl 6.5
2026ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Power Condition unit Safety of power converters for use inphotovoltaic power systems Part 1: General Requirements
Thermal & Humiditypreconditioning
IS 16221-1:2016 / IEC 62109-1Cl. 4.3 & 4.5
2027ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Power Condition unit Safety of power converters for use inphotovoltaic power systems Part 1: General Requirements
Thermal & Humiditypreconditioning,
IS 16221-1:2016 / IEC 62109-1Cl. 4.3 & 4.5
2028ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Power Condition unit Safety of power converters for use inphotovoltaic power systems Part 1: General Requirements U V exposure IS 16221-1:2016 / IEC 62109-1
Cl 6.4
2029ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Rolling Stock equipment for Railway applications Random Vibration Test,Mechanical Shock Test IEC 61373:2010 IEC 60571:
2030ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Safety of power converters for use in photovoltaic powersystems Part 2: Particular requirements for inverters
Environmental requirementsand conditions
IS 16221-2:2015 / IEC 62109-2Cl. 6
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 161 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2031ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Safety of power converters for use in photovoltaic powersystems Part 2: Particular requirements for inverters
Environmental requirementsand conditions
IS 16221-2:2015 / IEC 62109-2Cl. 6
2032ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Salt mist test Salt mist test IEC 60068-2-66:1994 IEC60068-2-11
2033ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Solar Inverter (upto 10 kW), UPS (upto 10 kW), LED lampsand luminaries, Fan test Change of temperature test IEC 60068-2-14 cl.8.0
2034ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Solar Inverter (upto 10 kW), UPS (upto 10 kW), LED lampsand luminaries, Fan test Cold test IEC 60068-2-1 cl.5.2 & 6.0
2035ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Solar Inverter (upto 10 kW), UPS (upto 10 kW), LED lampsand luminaries, Fan test
Damp Heat Cyclic Test (12h+12 h cycle) IEC 60068-2-30 cl. 7.3
2036ELECTRICAL-ENVIRONMENTAL TESTFACILITY
Solar Inverter (upto 10 kW), UPS (upto 10 kW), LED lampsand luminaries, Fan test Dry Heat Test IEC 60068-2-2 cl.5.2 & 6.0
2037 ELECTRICAL- INDUCTORS& TRANSFORMERS
3-Phase Energy Efficient induction motor (0.12 kW to 55kW) Voltage & Frequency Variation
IS 12615:2018 Cl. 4.3, IEC60034-1:2010/IS 15999-1:2016Cl. 7
2038 ELECTRICAL- INDUCTORS& TRANSFORMERS Reactors,Current limiting reactors Linearity test
IEC 60076-6 2007-12 cl.7.8.14,cl.8.9.11, cl.9.10.8, IS 5553part 1 2003, IS 5553 part 22003 cl.7.2, cl.7.3, IS 5553 part3 2003 cl.9.2, cl.9.3, IS 5553part 8 2004 cl.7.1, cl.7.2, IEC60353 cl.19.0
2039 ELECTRICAL- INDUCTORS& TRANSFORMERS
3-Phase Energy Efficient induction motor (0.12 kW to 55kW) Dimension IS 12615 Cl. No. 7 & 16.2.1
2040 ELECTRICAL- INDUCTORS& TRANSFORMERS
3-Phase Energy Efficient induction motor (0.12 kW to 55kW) Earthing
IS 12615 & Cl.No. 8, IEC60034-1:2010/IS 15999-1:2016Cl.No. 11
2041 ELECTRICAL- INDUCTORS& TRANSFORMERS
3-Phase Energy Efficient induction motor (0.12 kW to 55kW) Electrical operating Conditions
IS 12615:2018 Cl. 4.2, IEC60034-1:2010/IS 15999-1:2016Cl. 7
2042 ELECTRICAL- INDUCTORS& TRANSFORMERS
3-Phase Energy Efficient induction motor (0.12 kW to 55kW)
Full load/determination ofefficiency
IS 12615:2018 Cl. 15 & 16.2.3,IEC 60034-2-1:2007/IS15999-2-1:2011
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 162 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2043 ELECTRICAL- INDUCTORS& TRANSFORMERS
3-Phase Energy Efficient induction motor (0.12 kW to 55kW) High Voltage test
IS 12615:2018 Cl. No. 16.1.6,IEC 60034-1/IS 15999-1:2016Cl 9.2
2044 ELECTRICAL- INDUCTORS& TRANSFORMERS
3-Phase Energy Efficient induction motor (0.12 kW to 55kW) Locked Rotor Test IS 12615:2018 Cl. 16.1.4 &
16.2.2
2045 ELECTRICAL- INDUCTORS& TRANSFORMERS
3-Phase Energy Efficient induction motor (0.12 kW to 55kW) Momentary overload
IS 12615:2018 Cl. No.16.2.5,IEC 60034-1:2010/IS15999-1:2016
2046 ELECTRICAL- INDUCTORS& TRANSFORMERS
3-Phase Energy Efficient induction motor (0.12 kW to 55kW) No Load Test
IS 12615:2018 Cl. No. 16.1.3,IEC 60034-1:2010/IS15999-1:2016 Cl.9.1
2047 ELECTRICAL- INDUCTORS& TRANSFORMERS
3-Phase Energy Efficient induction motor (0.12 kW to 55kW) Performance Values IS 12615:2018 Cl. 14
2048 ELECTRICAL- INDUCTORS& TRANSFORMERS
3-Phase Energy Efficient induction motor (0.12 kW to 55kW)
Reduced Voltage Running uptest at no-load Is 12615:2018 Cl. 16.1.5
2049 ELECTRICAL- INDUCTORS& TRANSFORMERS
3-Phase Energy Efficient induction motor (0.12 kW to 55kW) Vibration IS 12615:2018 Cl. No. 16.3.1
2050 ELECTRICAL- INDUCTORS& TRANSFORMERS
3-Phase Energy Efficient induction motor (0.12 kW to 55kW)
Full load/determination ofEfficiency
IS 12615:2018 Cl. 15 & 16.2.3,IEC 60034-2-1:2007/IS15999-2-1:2011
2051 ELECTRICAL- INDUCTORS& TRANSFORMERS
3-Phase Energy Efficient induction motor (0.12 kW to 55kW) Insulation Resistance Test IS 12615:2018 Cl. No. 16.1.1
2052 ELECTRICAL- INDUCTORS& TRANSFORMERS
3-Phase Energy Efficient induction motor (0.12 kW to 55kW)
Measurement of Resistance ofstator windings
IS 12615:2018 cl. 16.1.2, IEC60034-1:2010/IS 15999-1:2016Cl. 8.6,IEC 60034-2-1:2007/IS15999-2-1:2011
2053 ELECTRICAL- INDUCTORS& TRANSFORMERS
3-Phase Energy Efficient induction motor (0.12 kW to 55kW) No load test
IS 12615:2018 Cl. No. 16.1.3,IEC 60034-1:2010/IS15999-1:2016 Cl. 9.1
2054 ELECTRICAL- INDUCTORS& TRANSFORMERS
3-Phase Energy Efficient induction motor (0.12 kW to 55kW) Over speed test
IS 12615:2018 Cl. No. 16.3.4,IEC 60034-1:2010/IS15999-1:2016 Cl. 9.7
2055 ELECTRICAL- INDUCTORS& TRANSFORMERS
3-Phase Energy Efficient induction motor (0.12 kW to 55kW) Pull up torque IS 12615:2018 Cl.No. 12.3
2056 ELECTRICAL- INDUCTORS& TRANSFORMERS
3-Phase Energy Efficient induction motor (0.12 kW to 55kW) Temperature Rise Rest
IS 12615:2018 cl.13,16.2.4,&16.3.5, IEC 60034-1:2010/IS15999-1:2016 Cl. 8
2057 ELECTRICAL- INDUCTORS& TRANSFORMERS
3-Phase Energy Efficient induction motor (0.12 kW to 55kW) Duty & Rating
IS 12615:2018 Cl. 11, IEC60034-1:2010/IS 15999-1:2016Cl. 4.2
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 163 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2058 ELECTRICAL- INDUCTORS& TRANSFORMERS
3-Phase Energy Efficient induction motor (0.12 kW to 55kW) Marking & Labelling
IS 12615:2018 Cl. 18, IEC60034-1:2010/IS 15999-1:2016Cl. 10
2059 ELECTRICAL- INDUCTORS& TRANSFORMERS
3-Phase Energy Efficient induction motor (0.12 kW to 55kW) Methods of Cooling IS 12615:2018 Cl. 6
2060 ELECTRICAL- INDUCTORS& TRANSFORMERS
3-Phase Energy Efficient induction motor (0.12 kW to 55kW) Momentary Excess Torque IS 12615:2018 Cl.12.2
2061 ELECTRICAL- INDUCTORS& TRANSFORMERS
3-Phase Energy Efficient induction motor (0.12 kW to 55kW) Terminal Marking IS 12615:2018 Cl. 9
2062 ELECTRICAL- INDUCTORS& TRANSFORMERS
3-Phase Energy Efficient induction motor (0.12 kW to 55kW) Test for Noise Levels for Motor IS 12615:2018 Cl. 16.3.2
2063 ELECTRICAL- INDUCTORS& TRANSFORMERS
3-Phase Energy Efficient induction motor (0.12 kW to 55kW) Type of Enclosures IS 12615:2018 Cl. 5
2064 ELECTRICAL- INDUCTORS& TRANSFORMERS
Conductor and Earth Wire Accessories for Over head PowerLines Resistance Measurement IS 2121 part 2
2065 ELECTRICAL- INDUCTORS& TRANSFORMERS
Conductor and Earth Wire Accessories for Over head PowerLines Resistance Measurement IS 2121 part 2
2066 ELECTRICAL- INDUCTORS& TRANSFORMERS Current transformer / Instrument transformer
Accuracy test Instrumentsecurity current test Currenterror & phase displacementComposite error
IS 2705 : 1992(Part 1, 2) RA2017 IS 2705:( Part 2) : 1992(RA : 2017) IEC61869-1:2007-10 IEC61869-2:2012-09 IS 16227 (part 1) : 2016 & IS 16227-(part2) IS:6949-1973 (RA 2016)ANSI/IEEE C57.13TM
2067 ELECTRICAL- INDUCTORS& TRANSFORMERS Current transformer / Instrument transformer Knee point voltage & exciting
current test
IS 2705 : 1992(Part 1, 2) RA2017 IS 2705:( Part 2) : 1992(RA : 2017) IEC61869-1:2007-10 IEC61869-2:2012-09 IS 16227 (part 1) : 2016 & IS 16227-(part2) IS:6949-1973 (RA 2016)ANSI/IEEE C57.13TM
2068 ELECTRICAL- INDUCTORS& TRANSFORMERS Current transformer / Instrument transformer Over-voltage inter –turn tests
IS 2705 : 1992(Part 1, 2) RA2017 IS 2705:( Part 2) : 1992(RA : 2017) IEC61869-1:2007-10 IEC61869-2:2012-09 IS 16227 (part 1) : 2016 & IS 16227-(part2) IS:6949-1973 (RA 2016)ANSI/IEEE C57.13TM
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 164 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2069 ELECTRICAL- INDUCTORS& TRANSFORMERS Current transformer / Instrument transformer
Power frequency dry withstandtests on primary andsecondary windings
IS 2705 : 1992(Part 1, 2) RA2017 IS 2705:( Part 2) : 1992(RA : 2017) IEC61869-1:2007-10 IEC61869-2:2012-09 IS 16227 (part 1) : 2016 & IS 16227-(part2) IS:6949-1973 (RA 2016)ANSI/IEEE C57.13TM
2070 ELECTRICAL- INDUCTORS& TRANSFORMERS Current transformer / Instrument transformer Secondary winding resistance
IS 2705 : 1992(Part 1, 2) RA2017 IS 2705:( Part 2) : 1992(RA : 2017) IEC61869-1:2007-10 IEC61869-2:2012-09 IS 16227 (part 1) : 2016 & IS 16227-(part2) IS:6949-1973 (RA 2016)ANSI/IEEE C57.13TM
2071 ELECTRICAL- INDUCTORS& TRANSFORMERS Current transformer / Instrument transformer Short time current test
IS 2705 : 1992(Part 1, 2) RA2017 IS 2705:( Part 2) : 1992(RA : 2017) IEC61869-1:2007-10 IEC61869-2:2012-09 IS 16227 (part 1) : 2016 & IS 16227-(part2) IS:6949-1973 (RA 2016)ANSI/IEEE C57.13TM
2072 ELECTRICAL- INDUCTORS& TRANSFORMERS Current transformer / Instrument transformer Temperature rise test
IS 2705 : 1992(Part 1, 2) RA2017 IS 2705:( Part 2) : 1992(RA : 2017) IEC61869-1:2007-10 IEC61869-2:2012-09 IS 16227 (part 1) : 2016 & IS 16227-(part2) IS:6949-1973 (RA 2016)ANSI/IEEE C57.13TM
2073 ELECTRICAL- INDUCTORS& TRANSFORMERS Instrument transformer Short time current test
IEC 61869-1:2007-10 IEC61869-2:2012-09 IS 16227 - 1 :2016 & IS 16227- 2 : 2016IS:2705-1 RA : 2017 & 2 :1992RA
2074 ELECTRICAL- INDUCTORS& TRANSFORMERS Instrument transformer Short time current test
IEC 61869-1:2007-10 IEC61869-2:2012-09 IS 16227 - 1 :2016 & IS 16227- 2 : 2016IS:2705-1 RA : 2017 & 2 :1992RA :
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 165 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2075 ELECTRICAL- INDUCTORS& TRANSFORMERS
Instrument transformers, Current transformers, Inductivevoltage transformers, Combined transformers, Capacitivevoltage transformers
Temperature Rise Test
IEC 61869-1 2007, IEC 61869-22012, IEC 61869-3 2011, IEC61869-4 2013, IEC 61869-52011, IS 16227-1:2016, IS16227-2:2016, IS16227-3:2015,IS16227-4:2015, IS 16227-5
2076 ELECTRICAL- INDUCTORS& TRANSFORMERS Line traps for ac. power systems
Measurement of powerfrequency. Inductance of maincoil of line trap.
IEC 60353 1989-11 cl.19.0, IS8792 1995, cl.4.6, IS 8793cl.6.2
2077 ELECTRICAL- INDUCTORS& TRANSFORMERS Line traps for ac. power systems and reactors
Measurement of powerfrequency. Inductance of maincoil of line trap
IEC 60353 1989-11, IS 8793,IEC 60076-6-2007, IEC 60310
2078 ELECTRICAL- INDUCTORS& TRANSFORMERS OLTC transition resistor Transition impedance test IEC 60214-1
2079 ELECTRICAL- INDUCTORS& TRANSFORMERS On load tap changers Short time current test IS 8468 : 1977 (RA 2016) IEC
60214-1 :
2080 ELECTRICAL- INDUCTORS& TRANSFORMERS
Power transformers Distribution transformers( Non Sealed& Sealed) Dry type Power transformers ControlTransformers
Determination of sound levelsIS:2026-1:2011 (RA : 2016 )IEC 60076-10:2016 IEEE StdC57.12.90™
2081 ELECTRICAL- INDUCTORS& TRANSFORMERS
Power transformers Distribution transformers( Non Sealed& Sealed) Dry type Power transformers ControlTransformers
Dielectric tests
IS:2026-1:2011 (RA : 2016 )IS:2026-2:2010 (RA 2015)IS:2026-3:2009 (RA 2014)IS:2026-4:1977 (RA 2016)IS:2026-5:2011 (RA : 2016)IEC:60076-1:2011IEC:60076-2:2011IEC:60076-3:2013-07IEC:60076-5, 2006IEC:60076-11, 2018RLVIS:1180-1: 2014 IS:11171,1985 (RA 2016)IS:12021
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 166 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2082 ELECTRICAL- INDUCTORS& TRANSFORMERS
Power transformers Distribution transformers( Non Sealed& Sealed) Dry type Power transformers ControlTransformers
Induced over voltage withstandtest
IS:2026-1:2011 (RA : 2016 )IS:2026-2:2010 (RA 2015)IS:2026-3:2009 (RA 2014)IS:2026-4:1977 (RA 2016)IS:2026-5:2011 (RA : 2016)IEC:60076-1:2011IEC:60076-2:2011IEC:60076-3:2013-07IEC:60076-5, 2006IEC:60076-11, 2018RLVIS:1180-1: 2014 IS:11171,1985 (RA 2016)IS:12021
2083 ELECTRICAL- INDUCTORS& TRANSFORMERS
Power transformers Distribution transformers( Non Sealed& Sealed) Dry type Power transformers ControlTransformers
Measurement of impedancevoltage/short circuitImpedance (principal tapping)and load loss
IS:2026-1:2011 (RA : 2016 )IS:2026-2:2010 (RA 2015)IS:2026-3:2009 (RA 2014)IS:2026-4:1977 (RA 2016)IS:2026-5:2011 (RA : 2016)IEC:60076-1:2011IEC:60076-2:2011IEC:60076-3:2013-07IEC:60076-5, 2006IEC:60076-11, 2018RLVIS:1180-1: 2014 IS:11171,1985 (RA 2016)IS:12021
2084 ELECTRICAL- INDUCTORS& TRANSFORMERS
Power transformers Distribution transformers( Non Sealed& Sealed) Dry type Power transformers ControlTransformers
Measurement of impedancevoltage/short circuitImpedance (principal tapping)and load loss
IS:2026-1:2011 (RA : 2016 )IS:2026-2:2010 (RA 2015)IS:2026-3:2009 (RA 2014)IS:2026-4:1977 (RA 2016)IS:2026-5:2011 (RA : 2016)IEC:60076-1:2011IEC:60076-2:2011IEC:60076-3:2013-07IEC:60076-5, 2006IEC:60076-11, 2018RLVIS:1180-1: 2014 IS:11171,1985 (RA 2016)IS:12021
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 167 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2085 ELECTRICAL- INDUCTORS& TRANSFORMERS
Power transformers Distribution transformers( Non Sealed& Sealed) Dry type Power transformers ControlTransformers
Measurement of insulationresistance
IS:2026-1:2011 (RA : 2016 )IS:2026-2:2010 (RA 2015)IS:2026-3:2009 (RA 2014)IS:2026-4:1977 (RA 2016)IS:2026-5:2011 (RA : 2016)IEC:60076-1:2011IEC:60076-2:2011IEC:60076-3:2013-07IEC:60076-5, 2006IEC:60076-11, 2018RLVIS:1180-1: 2014 IS:11171,1985 (RA 2016)IS:12021
2086 ELECTRICAL- INDUCTORS& TRANSFORMERS
Power transformers Distribution transformers( Non Sealed& Sealed) Dry type Power transformers ControlTransformers
Measurement of no-load lossand current
IS:2026-1:2011 (RA : 2016 )IS:2026-2:2010 (RA 2015)IS:2026-3:2009 (RA 2014)IS:2026-4:1977 (RA 2016)IS:2026-5:2011 (RA : 2016)IEC:60076-1:2011IEC:60076-2:2011IEC:60076-3:2013-07IEC:60076-5, 2006IEC:60076-11, 2018RLVIS:1180-1: 2014 IS:11171,1985 (RA 2016)IS:12021
2087 ELECTRICAL- INDUCTORS& TRANSFORMERS
Power transformers Distribution transformers( Non Sealed& Sealed) Dry type Power transformers ControlTransformers
Measurement of voltage ratioand check of voltage vectorrelationship. (Phasedisplacement)
IS:2026-1:2011 (RA : 2016 )IS:2026-2:2010 (RA 2015)IS:2026-3:2009 (RA 2014)IS:2026-4:1977 (RA 2016)IS:2026-5:2011 (RA : 2016)IEC:60076-1:2011IEC:60076-2:2011IEC:60076-3:2013-07IEC:60076-5, 2006IEC:60076-11, 2018RLVIS:1180-1: 2014 IS:11171,1985 (RA 2016)IS:12021
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 168 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2088 ELECTRICAL- INDUCTORS& TRANSFORMERS
Power transformers Distribution transformers( Non Sealed& Sealed) Dry type Power transformers ControlTransformers
Measurement of windingresistance
IS:2026-1:2011 (RA : 2016 )IS:2026-2:2010 (RA 2015)IS:2026-3:2009 (RA 2014)IS:2026-4:1977 (RA 2016)IS:2026-5:2011 (RA : 2016)IEC:60076-1:2011IEC:60076-2:2011IEC:60076-3:2013-07IEC:60076-5, 2006IEC:60076-11, 2018RLVIS:1180-1: 2014 IS:11171,1985 (RA 2016)IS:12021
2089 ELECTRICAL- INDUCTORS& TRANSFORMERS
Power transformers Distribution transformers( Non Sealed& Sealed) Dry type Power transformers ControlTransformers
Oil leakage test IS:1180-1: 2014 IEC:60076-1
2090 ELECTRICAL- INDUCTORS& TRANSFORMERS
Power transformers Distribution transformers( Non Sealed& Sealed) Dry type Power transformers ControlTransformers
Paint adhesion test IS:1180-1: 2014 IEC:60076-1
2091 ELECTRICAL- INDUCTORS& TRANSFORMERS
Power transformers Distribution transformers( Non Sealed& Sealed) Dry type Power transformers ControlTransformers
Measurement of impedancevoltage/short circuitImpedance (principal tapping)and load loss
IS:2026-1:2011 (RA : 2016 )IS:2026-2:2010 (RA 2015)IS:2026-3:2009 (RA 2014)IS:2026-4:1977 (RA 2016)IS:2026-5:2011 (RA : 2016)IEC:60076-1:2011IEC:60076-2:2011IEC:60076-3:2013-07IEC:60076-5, 2006IEC:60076-11, 2018RLVIS:1180-1: 2014 IS:11171,1985 (RA 2016)IS:12021
2092 ELECTRICAL- INDUCTORS& TRANSFORMERS
Power transformers Distribution transformers( Non Sealed& Sealed) Dry type Power transformers ControlTransformers
Measurement of windingresistance
IS:2026-1:2011 (RA : 2016 )IS:2026-2:2010 (RA 2015)IS:2026-3:2009 (RA 2014)IS:2026-4:1977 (RA 2016)IS:2026-5:2011 (RA : 2016)IEC:60076-1:2011IEC:60076-2:2011IEC:60076-3:2013-07IEC:60076-5, 2006IEC:60076-11, 2018RLVIS:1180-1: 2014 IS:11171,1985 (RA 2016)IS:12021
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 169 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2093 ELECTRICAL- INDUCTORS& TRANSFORMERS
Power transformers Distribution transformers( Non Sealed& Sealed) Dry type Power transformers ControlTransformers
Permissible flux density &overfluxing IS:1180-1
2094 ELECTRICAL- INDUCTORS& TRANSFORMERS
Power transformers Distribution transformers( Non Sealed& Sealed) Dry type Power transformers ControlTransformers
Pressure test IS:1180-1: 2014 IEC:60076-1
2095 ELECTRICAL- INDUCTORS& TRANSFORMERS
Power transformers Distribution transformers( Non Sealed& Sealed) Dry type Power transformers ControlTransformers
Short circuit tests
IS:2026-1:2011 (RA : 2016 )IS:2026-2:2010 (RA 2015)IS:2026-3:2009 (RA 2014)IS:2026-4:1977 (RA 2016)IS:2026-5:2011 (RA : 2016)IEC:60076-1:2011IEC:60076-2:2011IEC:60076-3:2013-07IEC:60076-5, 2006IEC:60076-11, 2018RLVIS:1180-1: 2014 IS:11171,1985 (RA 2016)IS:12021-2015(IEC:60076-5:2006) IEEE Std C57.12.90™-2010IEEE Std C57.12.20™-2011IEEE Std C57.12.00™
2096 ELECTRICAL- INDUCTORS& TRANSFORMERS
Power transformers Distribution transformers( Non Sealed& Sealed) Dry type Power transformers ControlTransformers
Temperature rise test.
IS:2026-1:2011 (RA : 2016 )IS:2026-2:2010 (RA 2015)IS:2026-3:2009 (RA 2014)IS:2026-4:1977 (RA 2016)IS:2026-5:2011 (RA : 2016)IEC:60076-1:2011IEC:60076-2:2011IEC:60076-3:2013-07IEC:60076-5, 2006IEC:60076-11, 2018RLVIS:1180-1: 2014 IS:11171,1985 (RA 2016)IS:12021
2097 ELECTRICAL- INDUCTORS& TRANSFORMERS
Power Transformers Distribu-tion Trans-formers, Tractiontransformers, Potential transformers
measurement of short circuitimpedance and loss
IS 2026 – part 1,2,3,52011/2010/2009/2011 IEC60076 – part 1/2/3/5/10-1,2011/2011/2013/2006/2016 IS11171-1985 (Reaffirmed 2016)IEC 60076 – 11 2004 IS 1180 –1989 (Reaffirmed 2014) IEC60310 – 2016 IS 3156-1992(Reaffirmed 2007) IEC61869-5-2011 IEC 61869-3-2011 ANSI :C-57.12-00 & .90
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 170 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2098 ELECTRICAL- INDUCTORS& TRANSFORMERS
Power Transformers Distribu-tion Trans-formers, Tractiontransformers, Potential transformers
measurement of voltage ratioand check of voltage vectorrelationship
IS 2026 – part 1,2,3,52011/2010/2009/2011 IEC60076 – part 1/2/3/5/10-1,2011/2011/2013/2006/2016 IS11171-1985 (Reaffirmed 2016)IEC 60076 – 11 2004 IS 1180 –1989 (Reaffirmed 2014) IEC60310 – 2016 IS 3156-1992(Reaffirmed 2007) IEC61869-5-2011 IEC 61869-3-2011 ANSI :C-57.12-00 & .90
2099 ELECTRICAL- INDUCTORS& TRANSFORMERS
Power Transformers Distribu-tion Trans-formers, Tractiontransformers, Potential transformers
Measurement of windingresistance
IS 2026 – part 1,2,3,52011/2010/2009/2011 IEC60076 – part 1/2/3/5/10-1,2011/2011/2013/2006/2016 IS11171-1985 (Reaffirmed 2016)IEC 60076 – 11 2004 IS 1180 –1989 (Reaffirmed 2014) IEC60310 – 2016 IS 3156-1992(Reaffirmed 2007) IEC61869-5-2011 IEC 61869-3-2011 ANSI :C-57.12-00 & .90
2100 ELECTRICAL- INDUCTORS& TRANSFORMERS Power transformers/ Reactors/ Current limiting reactors Insulation resistance test
IEC 60076-6 2007-12 cl.7.8.14,cl.8.9.11, cl.9.10.8, IS 5553part 1 2003, IS 5553 part 32003 cl.9.2, 9.3 IS 5553 part 82004 cl.7.1, cl.7.2, IEC 60353cl.19.0 cl.19.0:
2101 ELECTRICAL- INDUCTORS& TRANSFORMERS Power transformers/ Reactors/ Current limiting reactors Temperature rise test
IEC 60076-6 2007-12 , IEC60310 cl. 13.3.8,: 1989,cl.7.8.14, cl.8.9.11, cl.9.10.8, IS5553 part 1 2003, IS 5553 part3 2003 cl.9.2, 9.3 IS 5553 part8 2004 cl.7.1, cl.7.2, IEC 60353cl.19.0 cl.19.0
2102 ELECTRICAL- INDUCTORS& TRANSFORMERS Power transformers/Reactors/ Current limiting reactors Measurement of inductance
IEC 60076-6 2007-12 cl.7.8.14,cl.8.9.11, cl.9.10.8, IS 5553part 1 2003, IS 5553 part 32003 cl.9.2, 9.3 IS 5553 part 82004 cl.7.1, cl.7.2, IEC 60353cl.19.0 cl.19.0:
2103 ELECTRICAL- INDUCTORS& TRANSFORMERS Power transformers/Reactors/Current limiting reactors Separate source ac voltage
withstand voltage testIEC 60076-6-2007,IS5553-1,2,3,4,5 RA 2013, IEC60310
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 171 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2104 ELECTRICAL- INDUCTORS& TRANSFORMERS Reactor Short time current test IS 5553 : 1989 (RA 2013) IEC
60076-6 :
2105 ELECTRICAL- INDUCTORS& TRANSFORMERS Reactors measurement of winding
resistance
IS 5553 – Parts 1/2/3/4/5/6/7/81989/1990/1990/1989/1989/1990/1990/1990 (Reaffirmed2008/2008/2008/2009/2016/2009/2009) IEC 60076-6 2007
2106 ELECTRICAL- INDUCTORS& TRANSFORMERS Reactors Power Loss and Quality Factor IEC 60076-6-2007,IS
5553-1,2,3,4,5:RA
2107 ELECTRICAL- INDUCTORS& TRANSFORMERS Reactors Winding resistance
measuremenrIEC 60076-6-2007,IS5553-1,2,3,4,5 RA 2013, IEC60310
2108 ELECTRICAL- INDUCTORS& TRANSFORMERS Reactors and Line Traps
Measurement of Powerfrequency Inductance of maincoil of line trap/ Measurementof Power frequency Inductanceof Reactors
IEC 60076-6-2007,IEC60303-1:1993-04, IEC60310-2016, IEC60353-1989Am.1:
2109 ELECTRICAL- INDUCTORS& TRANSFORMERS Reactors and line traps Temperature rise test
IS 5553-Part 1,2,3,4,5-RA 2013,IEC 60076-6-2007, IEC60310-2016, IEC 60353
2110 ELECTRICAL- INDUCTORS& TRANSFORMERS Reactors and Line traps Temperature Rise Test
IS2026 Part 6:2017/,IEC60076-6:2007, IEC60310-2016, IEC 60353-1989Am.1-
2111 ELECTRICAL- INDUCTORS& TRANSFORMERS Verification of Terminal marking Verification of Terminal
markingIS 12615 Cl. No. 16 & IS/IEC60034-8
2112 ELECTRICAL- INDUCTORS& TRANSFORMERS Voltage transformer Accuracy test IS 3156:1992 (RA 2012) IEC
61869-1:2007-10 IEC 61869-3
2113 ELECTRICAL- INDUCTORS& TRANSFORMERS Voltage transformer Dielectric test IS 3156:1992 (RA 2012) IEC
61869-1:2007-10 IEC 61869-3
2114 ELECTRICAL- INDUCTORS& TRANSFORMERS Voltage transformer Short time current tests, IS 3156:1992 (RA 2012) IEC
61869-1:2007-10 IEC 61869-3
2115 ELECTRICAL- INDUCTORS& TRANSFORMERS Voltage transformer Temperature rise test IS 3156:1992 (RA 2012) IEC
61869-1:2007-10 IEC 61869-3
2116ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Electrical materials - Magnetic materials (CRNGO) Stacking factor. IS 648 2010cl. 9.1, IEC60404-13
2117ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Electrical materials - Magnetic materials (CRNGO) a.c. magnetization by Epsteintest
IS 648 2010 cl.7.1.1, IEC60404-2
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 172 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2118ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Electrical materials - Magnetic materials (CRNGO) Bend test. IS 648 2010 cl. 8.1-8.3, IEC60404-8-4 cl.8.4.2
2119ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Electrical materials - Magnetic materials (CRNGO) Total specific loss / core loss byEpstein test
IS 648 2010 , cl. 7.1.2, IEC60404-2
2120ELECTRICAL- INSULATINGMATERIALS &INSULATORS
C V T /Coupling Capacitors. Rating 1kV to 400kV (Inclusive) Discharge Test IEC 60358/2013, IEC 61869-5
2121ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Voltage Transformers, C.V.T., Coupling Capacitor, RatingAbove (145kV To 400 kV) Inclusive
Fast Transient Impulse VoltageTest/Multiple chopped test onCT’s.
IEC 61869-2/2012 andDocumented procedure as perCESI & EDF
2122ELECTRICAL- INSULATINGMATERIALS &INSULATORS
C V T /Coupling Capacitors. Ratings From 1 kV To 400 kV(Inclusive). Discharge Test IEC 60358 1990, IEC 61869-5
2123ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Copper/ Aluminium Conductor Resistance/ Resistivity/Conductivity
IS 10810 pt.5-1984 (RA- 2016),IS 13778 pt-5 2012 RA:2017,IEC 60851-5:2008 + A1:
2124ELECTRICAL- INSULATINGMATERIALS &INSULATORS
CVT (Above 3.6kV to 420kV) Ferro Resonance Test IEC 61869-5/
2125ELECTRICAL- INSULATINGMATERIALS &INSULATORS
CVT (above 3.6kV to 420kV) Short circuit withstandcapability test IEC 61869-
2126ELECTRICAL- INSULATINGMATERIALS &INSULATORS
CVT/Coupling capacitors, Ratings from 10kV to400KV(inclusive) Discharge test IEC 60358-1-2013,IEC 60358-2,
IEC 60358-3
2127ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Dielectric tests
Power transformersDistribution transformers( NonSealed & Sealed) Dry typePower transformers ControlTransformers
IS 2026-1 2011, IS 2026-22015, IS 2026-3 2014, IS2026-4 2011, IS 2026-5 2011,IEC 60076-1 2011, IEC 60076-22011, IEC 60076-3 2013, IEC60076-5 2006, IEC 60076-112004, IS 1180-1 2014, IS 11712011, IS 12021 2005, IEEE stdC57.12.90 2010, IEEE stdC57.12.20 2011, IEEE stdC57.12.00
2128ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc Insulator (Ball & socket, Tongue & clevis), PinInsulator, Post Insulator solid core - rating from 1kV to 36kV(inclusive). Long rod polymer insulators rating from 1kV to145kV
Mechanical Performance Test IS 4318- 2018, IEC60575-1977, IEC 60168:2001
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 173 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2129ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc Insulator (Ball & socket, Tongue & clevis), PinInsulator, Post Insulator solid core - rating from 1kV to 36kV(inclusive). Long rod polymer insulators rating from 1kV to145kV
Residual strength TestIS 4318/ 2018, IEC60575/1977, IEC 60168/A22000, IEC 60797
2130ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc Insulator (ball & socket, Tongue and Clevis ), long rodpolymer insulators. Rating from 1kV to 145 kV. Mechanical performance test IEC 60575/ 77 1993, RDSO
4318
2131ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc Insulator /Pin Insulator /Post Insulator - SolidCore,Hollow Insulator, Insulator Strings -Ratings up to 420kV (Inclusive), A. B. Switches /Isolator/Circuit Breaker/BusDuct /Cable/Bushing / Panel/Horn Gap/Dropout Fuse Unit-Ratings up to 420 kV (Inclusive), P T/ C V T /Coupling /TapChangers. Capacitors/Grading Capacitors /R.V.T.S/C.T - PTUnits. - Ratings up to 420kV (Inclusive), Series Reactors,Line Traps. Tuning Reactors & Neutral Earthling Reactors -Ratings up to 400kV (Inclusive), Current Transformers-Rating up to 420kV (Inclusive), Power/DistributionTransformers Including Earthing Transformers, Autotransformers etc.,- Up to and Inclusive of 1kVA to 100MVARating-1 kV To 220kV (Inclusive).
Power Frequency WithstandVoltage Test (Dry & Wet)
ANSI /IEEE C62.11-2020, ANSI/IEEE C62.22-2009, ANSI /IEEEC63.2-2016, ANSI /IEEEC57.98-2011, ANSI /IEEE4-2013, ANSI /IEEE 48-2020,ANSI /IEEE 81-2012, ANSI /IEEE656-2018, ANSI /IEEE 1122
2132ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc Insulator /Pin Insulator /Post Insulator - SolidCore,Hollow Insulator, Insulator Strings -Ratings up to 420kV (Inclusive), A. B. Switches /Isolator/Circuit Breaker/BusDuct /Cable/Bushing / Panel/Horn Gap/Dropout Fuse Unit-Ratings up to 420 kV (Inclusive), P T/ C V T /Coupling /TapChangers. Capacitors/Grading Capacitors /R.V.T.S/C.T - PTUnits. - Ratings up to 420kV (Inclusive), Series Reactors,Line Traps. Tuning Reactors & Neutral Earthling Reactors -Ratings up to 400kV (Inclusive), Current Transformers-Rating up to 420kV (Inclusive), Power/DistributionTransformers Including Earthing Transformers, Autotransformers etc.,- Up to and Inclusive of 1kVA to 100MVARating-1 kV To 220kV (Inclusive).
Power Frequency WithstandVoltage Test (Dry & Wet)
CISPR 18-3-2017,IEEE-18-2012, ANSI /IEEEC29-1/2018, ANSI /IEEEC29-2A-2013, ANSI /IEEEC29-2B-2013, ANSI /IEEEC29-3-2015, ANSI /IEEEC29-4-2015, ANSI /IEEEC29-5-2015, ANSI /IEEEC29-6-2015, ANSI /IEEEC29-7-2015, ANSI /IEEEC29-8-2017, ANSI /IEEEC29-9-2017, ANSI /IEEEC37.20.2-2015, ANSI /IEEEC37.23-2015, ANSI /IEEEC37.30.1-2011, ANSI /IEEEC37.41-2017, ANSI /IEEEC37.42-2016, ANSI /IEEEC57.12.00-2015, ANSI /IEEEC57.12.90-2017, ANSI /IEEEC57.13-2016, ANSI /IEEEC57.19.00
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 174 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2133ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc Insulator /Pin Insulator /Post Insulator - SolidCore,Hollow Insulator, Insulator Strings -Ratings up to 420kV (Inclusive), A. B. Switches /Isolator/Circuit Breaker/BusDuct /Cable/Bushing / Panel/Horn Gap/Dropout Fuse Unit-Ratings up to 420 kV (Inclusive), P T/ C V T /Coupling /TapChangers. Capacitors/Grading Capacitors /R.V.T.S/C.T - PTUnits. - Ratings up to 420kV (Inclusive), Series Reactors,Line Traps. Tuning Reactors & Neutral Earthling Reactors -Ratings up to 400kV (Inclusive), Current Transformers-Rating up to 420kV (Inclusive), Power/DistributionTransformers Including Earthing Transformers, Autotransformers etc.,- Up to and Inclusive of 1kVA to 100MVARating-1 kV To 220kV (Inclusive).
Power Frequency WithstandVoltage Test (Dry & Wet)
IEC 60143-1-2015, IEC60282-1-2020, IEC60282-2-2008, IEC60305-1995, IEC 60310-2016,IEC 353-A1:2002, IEC60358-1-2013, IEC60358-2-2013, IEC60358-3/2013, IEC60383-1-1993, IEC60383-2-1993, IEC60433-1998, IEC 60437-1997,IEC 60507-2013, IEC60660-1999, IEC 60660-1999,IEC 60700-1-2015, IEC60700-2-2016, IEC60871-1-2014, IEC60871-1-2005, IEC60984-2014, 61083-1-2001,IEC 61083-2-2013, IEC61109-2008, IEC 61211-2004,IEC 61245-2015, IEC61284-1997, IEC 61325-1995,IEC 61467-2008, IEC 61869-1
2134ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc Insulator /Pin Insulator /Post Insulator - SolidCore,Hollow Insulator, Insulator Strings -Ratings up to 420kV (Inclusive), A. B. Switches /Isolator/Circuit Breaker/BusDuct /Cable/Bushing / Panel/Horn Gap/Dropout Fuse Unit-Ratings up to 420 kV (Inclusive), P T/ C V T /Coupling /TapChangers. Capacitors/Grading Capacitors /R.V.T.S/C.T - PTUnits. - Ratings up to 420kV (Inclusive), Series Reactors,Line Traps. Tuning Reactors & Neutral Earthling Reactors -Ratings up to 400kV (Inclusive), Current Transformers-Rating up to 420kV (Inclusive), Power/DistributionTransformers Including Earthing Transformers, Autotransformers etc.,- Up to and Inclusive of 1kVA to 100MVARating-1 kV To 220kV (Inclusive).
Power Frequency WithstandVoltage Test (Dry & Wet)
IEC 61869-4-2013, IEC61869-5-2011, IEC61952-2008, IEC 62067-2011,IEC 62155-2003, IEC62217-2012, IEC 62231-2006,IEC 62271-1-2017, IEC62271-100-A2:2017, IEC62271-102-2018, IEC62271-103-2011, IEC62271-104-2020, IEC62271-105-2012, IEC62271-106-2011, IEC62271-107-2019, IEC62271-108-2020, IEC62271-109-2019, IEC62271-111-2019, IEC62271-200-2011, IEC62271-203-2011, IEC62271-37-013/2015, IEC62475-2010, NBR 5356-1/200:2017, CISPR 16-1-1-2019,CISPR 18-1-2017, CISPR18-2-2017,IEC60243-3
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 175 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2135ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc Insulator /Pin Insulator /Post Insulator - SolidCore,Hollow Insulator, Insulator Strings -Ratings up to 420kV (Inclusive), A. B. Switches /Isolator/Circuit Breaker/BusDuct /Cable/Bushing / Panel/Horn Gap/Dropout Fuse Unit-Ratings up to 420 kV (Inclusive), P T/ C V T /Coupling /TapChangers. Capacitors/Grading Capacitors /R.V.T.S/C.T - PTUnits. - Ratings up to 420kV (Inclusive), Series Reactors,Line Traps. Tuning Reactors & Neutral Earthling Reactors -Ratings up to 400kV (Inclusive), Current Transformers-Rating up to 420kV (Inclusive), Power/DistributionTransformers Including Earthing Transformers, Autotransformers etc.,- Up to and Inclusive of 1kVA to 100MVARating-1 kV To 220kV (Inclusive).
Power Frequency WithstandVoltage Test (Dry & Wet)
IS 692:2020, IS 731:2016, IS1180:2019, IS 1445:2019, IS1554-1: 2020 IS 1554-2:2020,IS 2026-1:2016, IS2026-3:2018, IS 2026-6:2017,IS 2071-1:2016, IS 2705:2017,IS 4318:2018, IS 4770:2017, IS5300:2019, IS 5350-1:2019, IS5350-2:2019, IS 5350-3:2019,IS 7098-1:2020, IS7098-2:2016, IS 7098-3:2014,IS 7421:2019, 8084:2017, IS8263:2018, IS 8269:2014, IS8468-1:2018, IS 8603:2019, IS8603-4:2019, IS 8690:2016, IS8792:2016, IS 8793:2016, IS8997
2136ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc Insulator /Pin Insulator /Post Insulator - SolidCore,Hollow Insulator, Insulator Strings -Ratings up to 420kV (Inclusive), A. B. Switches /Isolator/Circuit Breaker/BusDuct /Cable/Bushing / Panel/Horn Gap/Dropout Fuse Unit-Ratings up to 420 kV (Inclusive), P T/ C V T /Coupling /TapChangers. Capacitors/Grading Capacitors /R.V.T.S/C.T - PTUnits. - Ratings up to 420kV (Inclusive), Series Reactors,Line Traps. Tuning Reactors & Neutral Earthling Reactors -Ratings up to 400kV (Inclusive), Current Transformers-Rating up to 420kV (Inclusive), Power/DistributionTransformers Including Earthing Transformers, Autotransformers etc.,- Up to and Inclusive of 1kVA to 100MVARating-1 kV To 220kV (Inclusive).
Power Frequency WithstandVoltage Test (Dry & Wet)
IS 8998:2018, IS 9147:2016, IS9348:2018, IS 9385-1:2018, IS9385-2:2018, IS 9385-3:2018,IS 9431:2014, IS 10162: :2018, IS 10810-45:2016, IS10810-47:2020, IS11171:2016, IS 11548:2016, IS13573-1:2016, IS 13573-2:2016, IS 13573-3/2016, IS13772:2017, 13773:2018, IS13925:2017, IS 13961:/2014,IS 14222:2017, IS 15086:2017,IS 16167/ 2018, IS 16227-1:2016, IS 16227-2:2016, IS16227-3:2020, IS16227-4:2015, IS16227-5:2015, RDSO Spec.TI/SPC/OHE/INS/0070,TI/SPC/OHE/POST/0100(01)
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 176 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2137ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc Insulator /Pin Insulator /Post Insulator - SolidCore,Hollow Insulator, Insulator Strings -Ratings up to 420kV (Inclusive), A. B. Switches /Isolator/Circuit Breaker/BusDuct /Cable/Bushing / Panel/Horn Gap/Dropout Fuse Unit-Ratings up to 420 kV (Inclusive), P T/ C V T /Coupling /TapChangers. Capacitors/Grading Capacitors /R.V.T.S/C.T - PTUnits. - Ratings up to 420kV (Inclusive), Series Reactors,Line Traps. Tuning Reactors & Neutral Earthling Reactors -Ratings up to 400kV (Inclusive), Current Transformers-Rating up to 420kV (Inclusive), Power/DistributionTransformers Including Earthing Transformers, Autotransformers etc.,- Up to and Inclusive of 1kVA to 100MVARating-1 kV To 220kV (Inclusive).
Power Frequency WithstandVoltage Test (Dry & Wet)
RDSOspec.ETI/OHE/51(9/87)/1992,ETI/PSI/117(7/88)/1988,ET/OHE/15(9/91)/1991, VDE0278-628/2002, VDE078-629-1: : 2009, IEC60034-15-2009, IEC60060-1-2010, IEC60060-2-2010, IEC60071-1-2019, IEC60071-2-2018, IEC60071-5-2014, IEC60076-1-2011, IEC 60076-3-A1:2018, IEC 60076-4-2002,IEC 60076-6-2007, IEC60076-11-2018, IEC60076-15-2015, IEC60099-4-2014, IEC60099-8-2017, IEC60137-2017, IEC 60168-2000,IEC 60212-2010, IEC60214-2014, IEC60273-1990,IEC 60243-1-2013,IEC 60243-2
2138ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc Insulator /Pin Insulator /Post Insulator - Solid Core/Hollow Insulator/ Insulator strings, Lightning arresterHousing & insulating tubes etc. - rated 3.6kV to 400kV
Visible Discharge Test
IS 731:2016, IS 4318:2018, IS2071-1:2016, IS 2121 (Part 2):2018, IEC 60060-1-2010, IEC61284-1997, IEC 60353-2002,IS 398(Part 5):2018, RDSOSpec. TI/SPC/OHE/INS/0070,TI/SPC/OHE/POST/0100(01)/2020, ETI/OHE/51(9/87)/1992,ETI/PSI/117(7/88)/1988,ET/OHE/15(9/91)/1991, VDE0278-628/2002, VDE078-629-1
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 177 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2139ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc Insulator /Pin Insulator /Post Insulator - SolidCore/Hollow Insulator, Insulator Strings, Lightning ArresterHousing, Insulating Rod/ Operating Rod -For 220kV to 420kV (Inclusive), Repair Sleeves rated above 1kV to 420kV(Inclusive). Thyristor Valves - 11kV to 35kV.
Power Frequency FlashoverTest (Dry & Wet)
IEC 60282-1-2020, IEC60282-2-2008, IEC60305-1995, IEC 60310-2016,IEC 353-A1:2002, IEC60358-1-2013, IEC60358-2-2013, IEC60358-3/2013, IEC60383-1-1993, IEC60383-2-1993, IEC60433-1998, IEC 60437-1997,IEC 60507-2013, IEC60660-1999, IEC 60660-1999,IEC 60700-1-2015, IEC60700-2-2016, IEC60984-2014, 61083-1-2001,IEC 61083-2-2013, IEC61109-2008, IEC 61211-2004,IEC 61245-2015, IEC61284-1997, IEC 61325-1995,IEC 61467-2008, IEC61869-1-2007, IEC61869-2-2012, IEC 61869-3
2140ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc Insulator /Pin Insulator /Post Insulator - SolidCore/Hollow Insulator, Insulator Strings, Lightning ArresterHousing, Insulating Rod/ Operating Rod -For 220kV to 420kV (Inclusive), Repair Sleeves rated above 1kV to 420kV(Inclusive). Thyristor Valves - 11kV to 35kV.
Power Frequency FlashoverTest (Dry & Wet)
ANSI /IEEE C62.11-2020, ANSI/IEEE C62.22-2009, ANSI /IEEEC63.2-2016, ANSI /IEEEC57.98-2011, ANSI /IEEE4-2013, ANSI /IEEE 48-2020,ANSI /IEEE 81-2012, ANSI /IEEE656-2018, ANSI /IEEE 1122, IEC60243-3
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 178 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2141ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc Insulator /Pin Insulator /Post Insulator - SolidCore/Hollow Insulator, Insulator Strings, Lightning ArresterHousing, Insulating Rod/ Operating Rod -For 220kV to 420kV (Inclusive), Repair Sleeves rated above 1kV to 420kV(Inclusive). Thyristor Valves - 11kV to 35kV.
Power Frequency FlashoverTest (Dry & Wet)
CISPR 18-3-2017,IEEE-18-2012, ANSI /IEEEC29-1/2018, ANSI /IEEEC29-2A-2013, ANSI /IEEEC29-2B-2013, ANSI /IEEEC29-3-2015, ANSI /IEEEC29-4-2015, ANSI /IEEEC29-5-2015, ANSI /IEEEC29-6-2015, ANSI /IEEEC29-7-2015, ANSI /IEEEC29-8-2017, ANSI /IEEEC29-9-2017, ANSI /IEEEC37.20.2-2015, ANSI /IEEEC37.23-2015, ANSI /IEEEC37.30.1-2011, ANSI /IEEEC37.41-2017, ANSI /IEEEC37.42-2016, ANSI /IEEEC57.12.00-2015, ANSI /IEEEC57.12.90-2017, ANSI /IEEEC57.13-2016, ANSI /IEEEC57.19.00
2142ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc Insulator /Pin Insulator /Post Insulator - SolidCore/Hollow Insulator, Insulator Strings, Lightning ArresterHousing, Insulating Rod/ Operating Rod -For 220kV to 420kV (Inclusive), Repair Sleeves rated above 1kV to 420kV(Inclusive). Thyristor Valves - 11kV to 35kV.
Power Frequency FlashoverTest (Dry & Wet)
IEC 61869-4-2013, IEC61869-5-2011, IEC61952-2008, IEC 62067-2011,IEC 62155-2003, IEC62217-2012, IEC 62231-2006,IEC 62271-1-2017, IEC62271-100-A2:2017, IEC62271-102-2018, IEC62271-103-2011, IEC62271-104-2020, IEC62271-105-2012, IEC62271-106-2011, IEC62271-107-2019, IEC62271-108-2020, IEC62271-109-2019, IEC62271-111-2019, IEC62271-200-2011, IEC62271-203-2011, IEC62271-37-013/2015, IEC62475-2010, NBR 5356-1/200:2017, CISPR 16-1-1-2019,CISPR 18-1-2017, CISPR 18-2
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 179 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2143ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc Insulator /Pin Insulator /Post Insulator - SolidCore/Hollow Insulator, Insulator Strings, Lightning ArresterHousing, Insulating Rod/ Operating Rod -For 220kV to 420kV (Inclusive), Repair Sleeves rated above 1kV to 420kV(Inclusive). Thyristor Valves - 11kV to 35kV.
Power Frequency FlashoverTest (Dry & Wet)
IS 692:2020, IS 731:2016, IS1180:2019, IS 1445:2019, IS1554-1: 2020 IS 1554-2:2020,IS 2026-1:2016, IS2026-3:2018, IS 2026-6:2017,IS 2071-1:2016, IS 2705:2017,IS 4318:2018, IS 4770:2017, IS5300:2019, IS 5350-1:2019, IS5350-2:2019, IS 5350-3:2019,IS 7098-1:2020, IS7098-2:2016, IS 7098-3:2014,IS 7421:2019, 8084:2017, IS8263:2018, IS 8269:2014, IS8468-1:2018, IS 8603:2019, IS8603-4:2019, IS 8690:2016, IS8792:2016, IS 8793:2016, IS8997
2144ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc Insulator /Pin Insulator /Post Insulator - SolidCore/Hollow Insulator, Insulator Strings, Lightning ArresterHousing, Insulating Rod/ Operating Rod -For 220kV to 420kV (Inclusive), Repair Sleeves rated above 1kV to 420kV(Inclusive). Thyristor Valves - 11kV to 35kV.
Power Frequency FlashoverTest (Dry & Wet)
IS 8998:2018, IS 9147:2016, IS9348:2018, IS 9385-1:2018, IS9385-2:2018, IS 9385-3:2018,IS 9431:2014, IS 10162: :2018, IS 10810-45:2016, IS10810-47:2020, IS11171:2016, IS 11548:2016, IS13573-1:2016, IS 13573-2:2016, IS 13573-3/2016, IS13772:2017, 13773:2018, IS13925:2017, IS 13961:/2014,IS 14222:2017, IS 15086:2017,IS 16167/ 2018, IS 16227-1:2016, IS 16227-2:2016, IS16227-3:2020, IS16227-4:2015, IS16227-5:2015, RDSO Spec.TI/SPC/OHE/INS/0070,TI/SPC/OHE/POST/0100(01)
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 180 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2145ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc Insulator /Pin Insulator /Post Insulator - SolidCore/Hollow Insulator, Insulator Strings, Lightning ArresterHousing, Insulating Rod/ Operating Rod -For 220kV to 420kV (Inclusive), Repair Sleeves rated above 1kV to 420kV(Inclusive). Thyristor Valves - 11kV to 35kV.
Power Frequency FlashoverTest (Dry & Wet)
RDSOspec.ETI/OHE/51(9/87)/1992,ETI/PSI/117(7/88)/1988,ET/OHE/15(9/91)/1991, VDE0278-628/2002, VDE078-629-1: : 2009, IEC60034-15-2009, IEC60060-1-2010, IEC60060-2-2010, IEC60071-1-2019, IEC60071-2-2018, IEC60071-5-2014, IEC60076-1-2011, IEC 60076-3-A1:2018, IEC 60076-4-2002,IEC 60076-6-2007, IEC60076-11-2018, IEC60076-15-2015, IEC60099-4-2014, IEC60099-8-2017, IEC60137-2017, IEC 60168-2000,IEC 60212-2010, IEC60214-2014, IEC60273-1990,IEC 60243-1-2013,IEC 60243-2
2146ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc Insulator/Pin Insulator /Post Insulator - Solid core,Hollow Insulator, Insulating rod/operating rod/ Lightningarrester housing - rating 1kV to 400kV (Inclusive)
Temperature Cycle test (onPorcelain material)
IS 731:2016, IS 1445:2019, IS4318:2018, IS 5300:2019, IS5350-1:2019, IS 5350-2:2019,IS 5350-3:2019, IS 7421:2019,IS 9431:2014, IEC 60137-2017,IEC 60273-1990, IEC60305-1995, IEC60383-1-1993,IEC60383-2-1993, IEC60433-1998, IEC 60660-1999,IEC 60168-2000, IEC61952-2008, IEC 62155-2003,ANSI /IEEE C29-1-2018,ANSI/IEEE C 29-2A-2013,ANSI/IEEE C29-2B-2013,ANSI/IEEE C29-3-2015,ANSI/IEEE C 29-4-2015,ANSI/IEEE C29-5-2015,ANSI/IEEE C29-6-2015,ANSI/IEEE C29-7-2015,ANSI/IEEE C 57.12.00
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 181 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2147ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc Insulator/Pin Insulator /Post Insulator - Solid Core,Hollow Insulator, Insulator Strings -Ratings up to 420 kV(Inclusive), A. B. Switches /Isolator/Circuit Breaker/Bus Duct/Cable/Bushing / Panel/Horn Gap/Dropout Fuse Unit- Ratingup to 420 kV (Inclusive), P T/ C V T /Coupling /TapChangers. Capacitors/Grading Capacitors /R.V.T.S/C.T - PTUnits. - Ratings up to 420kV (Inclusive), Series Reactors,Line Traps. Tuning Reactors & Neutral Earthing Reactors -Ratings up to 400kV (Inclusive), Current Transformers-Rating up to 420kV (Inclusive), Power/DistributionTransformers Including Earthing Transformers,Autotransformers etc.,-up to and Inclusive of 1kVA to100MVA Rating-1 kV to 220kV (Inclusive).
Impulse flashover test
ANSI /IEEE C57.12.01-2020,ANSI /IEEE C57.12.20-2017,ANSI /IEEE C57.138-2016, ANSI/IEEE C57.12.90-2015cor1-2017, ANSI /IEEEC57.13-2016, ANSI /IEEEC57.19.00-2004, ANSI /IEEEC62.11-2020, ANSI /IEEEC62.22-2009, ANSI /IEEEC63.2-2016, ANSI /IEEEC57.98-2011, ANSI /IEEE4-2013, ANSI /IEEE 48-2020,ANSI /IEEE 81-2012, ANSI /IEEE6562018, ANSI /IEEE 1122
2148ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc Insulator/Pin Insulator /Post Insulator - Solid Core,Hollow Insulator, Insulator Strings -Ratings up to 420 kV(Inclusive), A. B. Switches /Isolator/Circuit Breaker/Bus Duct/Cable/Bushing / Panel/Horn Gap/Dropout Fuse Unit- Ratingup to 420 kV (Inclusive), P T/ C V T /Coupling /TapChangers. Capacitors/Grading Capacitors /R.V.T.S/C.T - PTUnits. - Ratings up to 420kV (Inclusive), Series Reactors,Line Traps. Tuning Reactors & Neutral Earthing Reactors -Ratings up to 400kV (Inclusive), Current Transformers-Rating up to 420kV (Inclusive), Power/DistributionTransformers Including Earthing Transformers,Autotransformers etc.,-up to and Inclusive of 1kVA to100MVA Rating-1 kV to 220kV (Inclusive).
Impulse flashover test
CISPR 18-3-2017,IEEE-18-2012, ANSI /IEEEC29-1-2018, ANSI /IEEEC29-2A-2013, ANSI /IEEEC29-2B-2013, ANSI /IEEEC29-3-2015, ANSI /IEEEC29-4-2015, ANSI /IEEEC29-5-2015, ANSI /IEEEC29-6-2015, ANSI /IEEEC29-7-2015, ANSI /IEEEC29-8-2017, ANSI /IEEEC29-9-2017, ANSI /IEEEC37.20.2-2015, ANSI /IEEEC37.23-2015, ANSI /IEEEC37.30.1-2011, ANSI /IEEEC37.41-2017, ANSI /IEEEC37.42-2016, ANSI /IEEEC57.12.00
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 182 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2149ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc Insulator/Pin Insulator /Post Insulator - Solid Core,Hollow Insulator, Insulator Strings -Ratings up to 420 kV(Inclusive), A. B. Switches /Isolator/Circuit Breaker/Bus Duct/Cable/Bushing / Panel/Horn Gap/Dropout Fuse Unit- Ratingup to 420 kV (Inclusive), P T/ C V T /Coupling /TapChangers. Capacitors/Grading Capacitors /R.V.T.S/C.T - PTUnits. - Ratings up to 420kV (Inclusive), Series Reactors,Line Traps. Tuning Reactors & Neutral Earthing Reactors -Ratings up to 400kV (Inclusive), Current Transformers-Rating up to 420kV (Inclusive), Power/DistributionTransformers Including Earthing Transformers,Autotransformers etc.,-up to and Inclusive of 1kVA to100MVA Rating-1 kV to 220kV (Inclusive).
Impulse flashover test
IEC 60282-1-2020 IEC60282-2-2008, IEC60305-1995, IEC 60310-2016,IEC 353-2002, IEC60358-1-2012, IEC60358-2-2013, IEC60358-3/2013, IEC60383-1-1993, IEC60383-2-1993, IEC60433-1998, IEC 60437-1997,IEC 60507-2013, IEC60660-1999, IEC60700-1-2015, IEC60700-2-2016, IEC60984-2014, 61083-1-2001,IEC 61083-2-2013, IEC61109-2008, IEC 61211-2004,IEC 61245-2015, IEC61284-1997, IEC 61325-1995,IEC 61467-2008, IEC61869-1-2007, IEC61869-2-2012, IEC 61869-3
2150ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc Insulator/Pin Insulator /Post Insulator - Solid Core,Hollow Insulator, Insulator Strings -Ratings up to 420 kV(Inclusive), A. B. Switches /Isolator/Circuit Breaker/Bus Duct/Cable/Bushing / Panel/Horn Gap/Dropout Fuse Unit- Ratingup to 420 kV (Inclusive), P T/ C V T /Coupling /TapChangers. Capacitors/Grading Capacitors /R.V.T.S/C.T - PTUnits. - Ratings up to 420kV (Inclusive), Series Reactors,Line Traps. Tuning Reactors & Neutral Earthing Reactors -Ratings up to 400kV (Inclusive), Current Transformers-Rating up to 420kV (Inclusive), Power/DistributionTransformers Including Earthing Transformers,Autotransformers etc.,-up to and Inclusive of 1kVA to100MVA Rating-1 kV to 220kV (Inclusive).
Impulse flashover test
IEC 61869-4-2013, IEC61869-5-2011, IEC61952-2008, IEC 62067-2011,IEC 62155-2003, IEC62217-2012, IEC 62231-2006,IEC 62271-1-2017, IEC62271-100-2017, IEC62271-102-2018, IEC62271-103-2011, IEC62271-104-2020, IEC62271-105-2012, IEC62271-106-2011, IEC62271-107-2019, IEC62271-108-2020, IEC62271-109-2019, IEC62271-111-2019, IEC62271-200-2011, IEC62271-203-2011, IEC62271-37-013-2015, IEC62475-2010, NBR 5356-1-200:2017, CISPR 16-1-1-2019,CISPR 18-1-2017, CISPR 18-2
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 183 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2151ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc Insulator/Pin Insulator /Post Insulator - Solid Core,Hollow Insulator, Insulator Strings -Ratings up to 420 kV(Inclusive), A. B. Switches /Isolator/Circuit Breaker/Bus Duct/Cable/Bushing / Panel/Horn Gap/Dropout Fuse Unit- Ratingup to 420 kV (Inclusive), P T/ C V T /Coupling /TapChangers. Capacitors/Grading Capacitors /R.V.T.S/C.T - PTUnits. - Ratings up to 420kV (Inclusive), Series Reactors,Line Traps. Tuning Reactors & Neutral Earthing Reactors -Ratings up to 400kV (Inclusive), Current Transformers-Rating up to 420kV (Inclusive), Power/DistributionTransformers Including Earthing Transformers,Autotransformers etc.,-up to and Inclusive of 1kVA to100MVA Rating-1 kV to 220kV (Inclusive).
Impulse flashover test
IS 692:2020, IS 731:2016, IS1180:2019, IS 1445:2019, IS1554-1:2020, IS 1554-2/2020,IS 2026-1:2016, IS2026-3:2018, IS 2026-6:2017,IS 2071-1:2016, IS 2705:2017,IS 4318:2018, IS 4770:2017, IS5300:2019, IS 5350-1:2019, IS5350-2:2019, IS 5350-3:2019,IS 7098-1:2020, IS7098-2:2016, IS 7098-3:2014,IS 7421:2019, 8084:2017, IS8263:2018, IS 8269:2014, IS8468-1:2018, IS 8603:2019, IS8603-4:2019, IS 8690:2016, IS8792:2016, IS 8793:2016, IS8997
2152ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc Insulator/Pin Insulator /Post Insulator - Solid Core,Hollow Insulator, Insulator Strings -Ratings up to 420 kV(Inclusive), A. B. Switches /Isolator/Circuit Breaker/Bus Duct/Cable/Bushing / Panel/Horn Gap/Dropout Fuse Unit- Ratingup to 420 kV (Inclusive), P T/ C V T /Coupling /TapChangers. Capacitors/Grading Capacitors /R.V.T.S/C.T - PTUnits. - Ratings up to 420kV (Inclusive), Series Reactors,Line Traps. Tuning Reactors & Neutral Earthing Reactors -Ratings up to 400kV (Inclusive), Current Transformers-Rating up to 420kV (Inclusive), Power/DistributionTransformers Including Earthing Transformers,Autotransformers etc.,-up to and Inclusive of 1kVA to100MVA Rating-1 kV to 220kV (Inclusive).
Impulse flashover test
IS 8998:2018, IS 9147:2016, IS9348:2018, IS 9385-1:2018, IS9385-2: 2018, IS 9385-3:2018,IS 9431:2014, IS 10162: 2018,IS 10810-45:2016, IS10810-47:2020, IS11171:2016, IS 11548:2016, IS13573-1: 2016, IS13573-2:2016, IS13573-3:2016, IS 13772:2017,13773:2018, IS 13925:2017, IS13961:2014, IS 14222:2017, IS15086-4:2017, IS15086-5:2020, IS 16227-1:2016, IS 16227-2:2016, IS16227-3:2020, IS16227-4:2015, IS16227-5:2015, RDSO Spec.TI/SPC/OHE/INS/0070,TI/SPC/OHE/POST/0100(01)
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 184 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2153ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc Insulator/Pin Insulator /Post Insulator - Solid Core,Hollow Insulator, Insulator Strings -Ratings up to 420 kV(Inclusive), A. B. Switches /Isolator/Circuit Breaker/Bus Duct/Cable/Bushing / Panel/Horn Gap/Dropout Fuse Unit- Ratingup to 420 kV (Inclusive), P T/ C V T /Coupling /TapChangers. Capacitors/Grading Capacitors /R.V.T.S/C.T - PTUnits. - Ratings up to 420kV (Inclusive), Series Reactors,Line Traps. Tuning Reactors & Neutral Earthing Reactors -Ratings up to 400kV (Inclusive), Current Transformers-Rating up to 420kV (Inclusive), Power/DistributionTransformers Including Earthing Transformers,Autotransformers etc.,-up to and Inclusive of 1kVA to100MVA Rating-1 kV to 220kV (Inclusive).
Impulse flashover test
RDSOSpec.ETI/OHE/51(9/87)/1992,ETI/PSI/117(7/88)/1988,ET/OHE/15(9/91)/1991, VDE0278-628/2002, VDE078-629-1: 2009, IEC60034-15-2009, IEC60060-1-2010, IEC60060-2-2010, IEC60071-1-2019, IEC60071-2/-018, IEC60071-5-2014, IEC60076-1-2011, 60076-3-A1:2018, 60076-4-2002,60076-6-2007, 60076-11-2018,60076 -15-2015, IEC60099-4-2014, IEC60099-8-2017, IEC60137-2017, IEC 60168-2000,IEC 60212-2010, IEC60214-2014, IEC60273-1990,IEC 60243-1-2013,IEC 60243-2-2013, IEC 60243-3
2154ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc Insulator/Pin Insulator /Post Insulator - Solid Core,Hollow Insulator, Insulator Strings -Ratings up to 420 kV(Inclusive), A. B. Switches /Isolator/Circuit Breaker/Bus Duct/Cable/Bushing / Panel/Horn Gap/Dropout Fuse Unit- Ratingup to 420 kV (Inclusive), P T/ C V T /Coupling /TapChangers. Capacitors/Grading Capacitors /R.V.T.S/C.T - PTUnits. - Ratings up to 420kV (Inclusive), Series Reactors,Line Traps. Tuning Reactors & Neutral Earthing Reactors -Ratings up to 400kV (Inclusive), Current Transformers-Rating up to 420kV (Inclusive), Power/DistributionTransformers Including Earthing Transformers,Autotransformers etc.,-up to and Inclusive of 1kVA to100MVA Rating-1 kV to 220kV (Inclusive).
Impulse withstand voltage test
ANSI /IEEE C57.12.01-2020,ANSI /IEEE C57.12.20-2017,ANSI /IEEE C57.138-2016, ANSI/IEEE C57.12.90-2015cor1-2017, ANSI /IEEEC57.13-2016, ANSI /IEEEC57.19.00-2004, ANSI /IEEEC62.11-2020, ANSI /IEEEC62.22-2009, ANSI /IEEEC63.2-2016, ANSI /IEEEC57.98-2011, ANSI /IEEE4-2013, ANSI /IEEE 48-2020,ANSI /IEEE 81-2012, ANSI /IEEE6562018, ANSI /IEEE 1122
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 185 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2155ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc Insulator/Pin Insulator /Post Insulator - Solid Core,Hollow Insulator, Insulator Strings -Ratings up to 420 kV(Inclusive), A. B. Switches /Isolator/Circuit Breaker/Bus Duct/Cable/Bushing / Panel/Horn Gap/Dropout Fuse Unit- Ratingup to 420 kV (Inclusive), P T/ C V T /Coupling /TapChangers. Capacitors/Grading Capacitors /R.V.T.S/C.T - PTUnits. - Ratings up to 420kV (Inclusive), Series Reactors,Line Traps. Tuning Reactors & Neutral Earthing Reactors -Ratings up to 400kV (Inclusive), Current Transformers-Rating up to 420kV (Inclusive), Power/DistributionTransformers Including Earthing Transformers,Autotransformers etc.,-up to and Inclusive of 1kVA to100MVA Rating-1 kV to 220kV (Inclusive).
Impulse withstand voltage test
CISPR 18-3-2017,IEEE-18-2012, ANSI /IEEEC29-1-2018, ANSI /IEEEC29-2A-2013, ANSI /IEEEC29-2B-2013, ANSI /IEEEC29-3-2015, ANSI /IEEEC29-4-2015, ANSI /IEEEC29-5-2015, ANSI /IEEEC29-6-2015, ANSI /IEEEC29-7-2015, ANSI /IEEEC29-8-2017, ANSI /IEEEC29-9-2017, ANSI /IEEEC37.20.2-2015, ANSI /IEEEC37.23-2015, ANSI /IEEEC37.30.1-2011, ANSI /IEEEC37.41-2017, ANSI /IEEEC37.42-2016, ANSI /IEEEC57.12.00
2156ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc Insulator/Pin Insulator /Post Insulator - Solid Core,Hollow Insulator, Insulator Strings -Ratings up to 420 kV(Inclusive), A. B. Switches /Isolator/Circuit Breaker/Bus Duct/Cable/Bushing / Panel/Horn Gap/Dropout Fuse Unit- Ratingup to 420 kV (Inclusive), P T/ C V T /Coupling /TapChangers. Capacitors/Grading Capacitors /R.V.T.S/C.T - PTUnits. - Ratings up to 420kV (Inclusive), Series Reactors,Line Traps. Tuning Reactors & Neutral Earthing Reactors -Ratings up to 400kV (Inclusive), Current Transformers-Rating up to 420kV (Inclusive), Power/DistributionTransformers Including Earthing Transformers,Autotransformers etc.,-up to and Inclusive of 1kVA to100MVA Rating-1 kV to 220kV (Inclusive).
Impulse withstand voltage test
IEC 60143-1-2015, IEC60282-1-2020 IEC60282-2-2008, IEC60305-1995, IEC 60310-2016,IEC 353-2002, IEC60358-1-2012, IEC60358-2-2013, IEC60358-3-2013, IEC60383-1-1993, IEC60383-2-1993, IEC60433-1998, IEC 60437-1997,IEC 60507-2013, IEC60660-1999, IEC60700-1-2015, IEC60700-2-2016, IEC60871-1-2005, IEC60871-1-2014, IEC60984-2014, 61083-1-2001,IEC 61083-2-2013, IEC61109-2008, IEC 61211-2004,IEC 61245-2015, IEC61284-1997, IEC 61325-1995,IEC 61467-2008, IEC61869-1-2007, IEC 61869-2-2
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 186 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2157ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc Insulator/Pin Insulator /Post Insulator - Solid Core,Hollow Insulator, Insulator Strings -Ratings up to 420 kV(Inclusive), A. B. Switches /Isolator/Circuit Breaker/Bus Duct/Cable/Bushing / Panel/Horn Gap/Dropout Fuse Unit- Ratingup to 420 kV (Inclusive), P T/ C V T /Coupling /TapChangers. Capacitors/Grading Capacitors /R.V.T.S/C.T - PTUnits. - Ratings up to 420kV (Inclusive), Series Reactors,Line Traps. Tuning Reactors & Neutral Earthing Reactors -Ratings up to 400kV (Inclusive), Current Transformers-Rating up to 420kV (Inclusive), Power/DistributionTransformers Including Earthing Transformers,Autotransformers etc.,-up to and Inclusive of 1kVA to100MVA Rating-1 kV to 220kV (Inclusive).
Impulse withstand voltage test
IEC 61869-4-2013, IEC61869-5-2011, IEC61952-2008, IEC 62067-2011,IEC 62155-2003, IEC62217-2012, IEC 62231-2006,IEC 62271-1-2017, IEC62271-100-2017, IEC62271-102-2018, IEC62271-103-2011, IEC62271-104-2020, IEC62271-105-2012, IEC62271-106-2011, IEC62271-107-2019, IEC62271-108-2020, IEC62271-109-2019, IEC62271-111-2019, IEC62271-200-2011, IEC62271-203-2011, IEC62271-37-013-2015, IEC62475-2010, NBR 5356-1-200:2017, CISPR 16-1-1-2019,CISPR 18-1-2017, CISPR 18-2
2158ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc Insulator/Pin Insulator /Post Insulator - Solid Core,Hollow Insulator, Insulator Strings -Ratings up to 420 kV(Inclusive), A. B. Switches /Isolator/Circuit Breaker/Bus Duct/Cable/Bushing / Panel/Horn Gap/Dropout Fuse Unit- Ratingup to 420 kV (Inclusive), P T/ C V T /Coupling /TapChangers. Capacitors/Grading Capacitors /R.V.T.S/C.T - PTUnits. - Ratings up to 420kV (Inclusive), Series Reactors,Line Traps. Tuning Reactors & Neutral Earthing Reactors -Ratings up to 400kV (Inclusive), Current Transformers-Rating up to 420kV (Inclusive), Power/DistributionTransformers Including Earthing Transformers,Autotransformers etc.,-up to and Inclusive of 1kVA to100MVA Rating-1 kV to 220kV (Inclusive).
Impulse Withstand Voltage test
IS 692:2020, IS 731:2016, IS1180:2019, IS 1445:2019, IS1554-1:2020, IS 1554-2/2020,IS 2026-1:2016, IS2026-3:2018, IS 2026-6:2017,IS 2071-1:2016, IS 2705:2017,IS 4318:2018, IS 4770:2017, IS5300:2019, IS 5350-1:2019, IS5350-2:2019, IS 5350-3:2019,IS 7098-1:2020, IS7098-2:2016, IS 7098-3:2014,IS 7421:2019, 8084:2017, IS8263:2018, IS 8269:2014, IS8468-1:2018, IS 8603:2019, IS8603-4:2019, IS 8690:2016, IS8792:2016, IS 8793:2016, IS8997
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 187 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2159ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc Insulator/Pin Insulator /Post Insulator - Solid Core,Hollow Insulator, Insulator Strings -Ratings up to 420 kV(Inclusive), A. B. Switches /Isolator/Circuit Breaker/Bus Duct/Cable/Bushing / Panel/Horn Gap/Dropout Fuse Unit- Ratingup to 420 kV (Inclusive), P T/ C V T /Coupling /TapChangers. Capacitors/Grading Capacitors /R.V.T.S/C.T - PTUnits. - Ratings up to 420kV (Inclusive), Series Reactors,Line Traps. Tuning Reactors & Neutral Earthing Reactors -Ratings up to 400kV (Inclusive), Current Transformers-Rating up to 420kV (Inclusive), Power/DistributionTransformers Including Earthing Transformers,Autotransformers etc.,-up to and Inclusive of 1kVA to100MVA Rating-1 kV to 220kV (Inclusive).
Impulse Withstand Voltage test
IS 8998:2018, IS 9147:2016, IS9348:2018, IS 9385-1:2018, IS9385-2: 2018, IS 9385-3:2018,IS 9431:2014, IS 10162: 2018,IS 10810-45:2016, IS10810-47:2020, IS11171:2016, IS 11548:2016, IS13573-1: 2016, IS13573-2:2016, IS13573-3:2016, IS 13772:2017,13773:2018, IS 13925:2017, IS13961:2014, IS 14222:2017, IS15086-4:2017, IS15086-5:2020, IS 16227-1:2016, IS 16227-2:2016, IS16227-3:2020, IS16227-4:2015, IS16227-5:2015, RDSO Spec.TI/SPC/OHE/INS/0070,TI/SPC/OHE/POST/0100(01)
2160ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc Insulator/Pin Insulator /Post Insulator - Solid Core,Hollow Insulator, Insulator Strings -Ratings up to 420 kV(Inclusive), A. B. Switches /Isolator/Circuit Breaker/Bus Duct/Cable/Bushing / Panel/Horn Gap/Dropout Fuse Unit- Ratingup to 420 kV (Inclusive), P T/ C V T /Coupling /TapChangers. Capacitors/Grading Capacitors /R.V.T.S/C.T - PTUnits. - Ratings up to 420kV (Inclusive), Series Reactors,Line Traps. Tuning Reactors & Neutral Earthing Reactors -Ratings up to 400kV (Inclusive), Current Transformers-Rating up to 420kV (Inclusive), Power/DistributionTransformers Including Earthing Transformers,Autotransformers etc.,-up to and Inclusive of 1kVA to100MVA Rating-1 kV to 220kV (Inclusive).
Impulse withstand voltage test
RDSO spec.ETI/OHE/51(9/87)/1992,ETI/PSI/117(7/88)/1988,ET/OHE/15(9/91)/1991, VDE0278-628/2002, VDE078-629-1: 2009, IEC60034-15-2009, IEC60060-1-2010, IEC60060-2-2010, IEC60071-1-2019, IEC60071-2/-018, IEC60071-5-2014, IEC60076-1-2011, 60076-3-A1:2018, 60076-4-2002,60076-6-2007, 60076-11-2018,60076 -15-2015, IEC60099-4-2014, IEC60099-8-2017, IEC60137-2017, IEC 60168-2000,IEC 60212-2010, IEC60214-2014, IEC60273-1990,IEC 60243-1-2013,IEC 60243-2-2013, IEC 60243-3
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 188 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2161ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc Insulator/Pin Insulator /Post Insulator - Solid Core,Hollow Insulator, Insulator Strings -Ratings up to 420 kV(Inclusive), A. B. Switches /Isolator/Circuit Breaker/Bus Duct/Cable/Bushing / Panel/Horn Gap/Dropout Fuse Unit- Ratingup to 420 kV (Inclusive), P T/ C V T /Coupling /TapChangers. Capacitors/Grading Capacitors /R.V.T.S/C.T - PTUnits. - Ratings up to 420kV (Inclusive), Series Reactors,Line Traps. Tuning Reactors & Neutral Earthing Reactors -Ratings up to 400kV (Inclusive), Current Transformers-Rating up to 420kV (Inclusive), Power/DistributionTransformers Including Earthing Transformers,Autotransformers etc.,-up to and Inclusive of 1kVA to100MVA Rating-1 kV to 220kV (Inclusive).Lightningarresters – rating 1kV to 245kV (Inclusive). Bushings /power connectors, compression joints, repair sleeves rating145 to 420kV (Inclusive)
Radio Interference VoltageTest (Dry & Wet)
ANSI /IEEE C29-2B-2013, ANSI/IEEE C29-3-2015, ANSI /IEEEC29-4-2015, ANSI /IEEEC29-5-2015, ANSI /IEEEC29-6-2015, ANSI /IEEEC29-7-2015, ANSI /IEEEC29-8-2017, ANSI /IEEEC29-9-2017, ANSI /IEEEC57.13-2016, ANSI /IEEEC63-2-2016, ANSI /IEEE656-2018, ANSI /IEEE1122-2007, CISPR 16-1-2019,CISPR 18-1-2017, CISPR18-2-2017, CISPR 18-3- 2017,IEEE 18 Std.
2162ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc Insulator/Pin Insulator /Post Insulator - Solid Core,Hollow Insulator, Insulator Strings -Ratings up to 420 kV(Inclusive), A. B. Switches /Isolator/Circuit Breaker/Bus Duct/Cable/Bushing / Panel/Horn Gap/Dropout Fuse Unit- Ratingup to 420 kV (Inclusive), P T/ C V T /Coupling /TapChangers. Capacitors/Grading Capacitors /R.V.T.S/C.T - PTUnits. - Ratings up to 420kV (Inclusive), Series Reactors,Line Traps. Tuning Reactors & Neutral Earthing Reactors -Ratings up to 400kV (Inclusive), Current Transformers-Rating up to 420kV (Inclusive), Power/DistributionTransformers Including Earthing Transformers,Autotransformers etc.,-up to and Inclusive of 1kVA to100MVA Rating-1 kV to 220kV (Inclusive).Lightningarresters – rating 1kV to 245kV (Inclusive). Bushings /power connectors, compression joints, repair sleeves rating145 to 420kV (Inclusive)
Radio Interference VoltageTest (Dry & Wet)
ANSI /IEEE C29-2B-2013, ANSI/IEEE C29-3-2015, ANSI /IEEEC29-4-2015, ANSI /IEEEC29-5-2015, ANSI /IEEEC29-6-2015, ANSI /IEEEC29-7-2015, ANSI /IEEEC29-8-2017, ANSI /IEEEC29-9-2017, ANSI /IEEEC57.13-2016, ANSI /IEEEC63-2-2016, ANSI /IEEE656-2018, ANSI /IEEE1122-2007, CISPR 16-1-2019,CISPR 18-1-2017, CISPR18-2-2017, CISPR 18-3-2017,IEEE 18 Std.
2163ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc Insulator/Pin Insulator /Post Insulator - Solid Core,Hollow Insulator, Insulator Strings -Ratings up to 420 kV(Inclusive), A. B. Switches /Isolator/Circuit Breaker/Bus Duct/Cable/Bushing / Panel/Horn Gap/Dropout Fuse Unit- Ratingup to 420 kV (Inclusive), P T/ C V T /Coupling /TapChangers. Capacitors/Grading Capacitors /R.V.T.S/C.T - PTUnits. - Ratings up to 420kV (Inclusive), Series Reactors,Line Traps. Tuning Reactors & Neutral Earthing Reactors -Ratings up to 400kV (Inclusive), Current Transformers-Rating up to 420kV (Inclusive), Power/DistributionTransformers Including Earthing Transformers,Autotransformers etc.,-up to and Inclusive of 1kVA to100MVA Rating-1 kV to 220kV (Inclusive).Lightningarresters – rating 1kV to 245kV (Inclusive). Bushings /power connectors, compression joints, repair sleeves rating145 to 420kV (Inclusive)
Radio Interference VoltageTest (Dry & wet)
IEC 61869-4-2013, IEC61869-5-2011, IEC62271-1-2017, IEC62271-102-2018, IEC62271-100-2017, IEC62271-103-2011, IEC62271-111/2019, RDSO Spec.TI/SPC/OHE/INS/0070,TI/SPC/OHE/POST/0100(01)/2020, ETI/OHE/51(9/87)/1992,ETI/PSI/117(7/88)/1988,ET/OHE/15(9/91)/1991, VDE0278-628/2002, VDE078-629-1: : 2009, NEMA107-2016, ANSI /IEEEC29-1-2018, ANSI /IEEE C29-2A
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 189 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2164ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc Insulator/Pin Insulator /Post Insulator - Solid Core,Hollow Insulator, Insulator Strings -Ratings up to 420 kV(Inclusive), A. B. Switches /Isolator/Circuit Breaker/Bus Duct/Cable/Bushing / Panel/Horn Gap/Dropout Fuse Unit- Ratingup to 420 kV (Inclusive), P T/ C V T /Coupling /TapChangers. Capacitors/Grading Capacitors /R.V.T.S/C.T - PTUnits. - Ratings up to 420kV (Inclusive), Series Reactors,Line Traps. Tuning Reactors & Neutral Earthing Reactors -Ratings up to 400kV (Inclusive), Current Transformers-Rating up to 420kV (Inclusive), Power/DistributionTransformers Including Earthing Transformers,Autotransformers etc.,-up to and Inclusive of 1kVA to100MVA Rating-1 kV to 220kV (Inclusive).Lightningarresters – rating 1kV to 245kV (Inclusive). Bushings /power connectors, compression joints, repair sleeves rating145 to 420kV (Inclusive)
Radio Interference VoltageTest (Dry & Wet)
IEC 61869-4-2013, IEC61869-5-2011, IEC62271-1-2017, IEC62271-102-2018, IEC62271-100-2017, IEC62271-103-2011, IEC62271-111/2019, RDSO Spec.TI/SPC/OHE/INS/0070,TI/SPC/OHE/POST/0100(01)/2020, ETI/OHE/51(9/87)/1992,ETI/PSI/117(7/88)/1988,ET/OHE/15(9/91)/1991, VDE0278-628/2002, VDE078-629-1: : 2009, NEMA107-2016, ANSI /IEEEC29-1-2018, ANSI /IEEE C29-2A
2165ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc Insulator/Pin Insulator /Post Insulator - Solid Core,Hollow Insulator, Insulator Strings -Ratings up to 420 kV(Inclusive), A. B. Switches /Isolator/Circuit Breaker/Bus Duct/Cable/Bushing / Panel/Horn Gap/Dropout Fuse Unit- Ratingup to 420 kV (Inclusive), P T/ C V T /Coupling /TapChangers. Capacitors/Grading Capacitors /R.V.T.S/C.T - PTUnits. - Ratings up to 420kV (Inclusive), Series Reactors,Line Traps. Tuning Reactors & Neutral Earthing Reactors -Ratings up to 400kV (Inclusive), Current Transformers-Rating up to 420kV (Inclusive), Power/DistributionTransformers Including Earthing Transformers,Autotransformers etc.,-up to and Inclusive of 1kVA to100MVA Rating-1 kV to 220kV (Inclusive).Lightningarresters – rating 1kV to 245kV (Inclusive). Bushings /power connectors, compression joints, repair sleeves rating145 to 420kV (Inclusive)
Radio Interference VoltageTest (Dry & wet)
IS 731:2016, IS 2121 (Part2):2018, IS 4318/2018, IS 398(part 5):2018, IS 2026-3:2018,IS 2026-6:017, IS 5350-1:2019,IS 5350-2:2019, IS5350-3:2019, IS 8263:2018, IS8792 :2016, IS 8793 :2016, IS9348:2018, IS 11171:2016, IS16227-1: 2016, IS16227-2:2016, IS16227-3:2020, IS16227-4:2015, IS16227-5:2015, NBR 5356, IEC60076-3-2018, IEC60076-6-2007, IEC60076-11-2018, IEC60060-1-2010, IEC61284-1997, IEC 60353-2002,IEC 60437-1997, IEC61869-1-2007, IEC61869-2-2012, IEC 61869-3
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 190 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2166ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc Insulator/Pin Insulator /Post Insulator - Solid Core,Hollow Insulator, Insulator Strings -Ratings up to 420 kV(Inclusive), A. B. Switches /Isolator/Circuit Breaker/Bus Duct/Cable/Bushing / Panel/Horn Gap/Dropout Fuse Unit- Ratingup to 420 kV (Inclusive), P T/ C V T /Coupling /TapChangers. Capacitors/Grading Capacitors /R.V.T.S/C.T - PTUnits. - Ratings up to 420kV (Inclusive), Series Reactors,Line Traps. Tuning Reactors & Neutral Earthing Reactors -Ratings up to 400kV (Inclusive), Current Transformers-Rating up to 420kV (Inclusive), Power/DistributionTransformers Including Earthing Transformers,Autotransformers etc.,-up to and Inclusive of 1kVA to100MVA Rating-1 kV to 220kV (Inclusive).Lightningarresters – rating 1kV to 245kV (Inclusive). Bushings /power connectors, compression joints, repair sleeves rating145 to 420kV (Inclusive)
Radio Interference VoltageTest (Dry & Wet)
IS 731:2016, IS 2121 (Part2):2018, IS 4318/2018, IS 398(part 5):2018, IS 2026-3:2018,IS 2026-6:017, IS 5350-1:2019,IS 5350-2:2019, IS5350-3:2019, IS 8263:2018, IS8792 :2016, IS 8793 :2016, IS9348:2018, IS 11171:2016, IS16227-1: 2016, IS16227-2:2016, IS16227-3:2020, IS16227-4:2015, IS16227-5:2015, NBR 5356, IEC60076-3-2018, IEC60076-6-2007, IEC60076-11-2018, IEC60060-1-2010, IEC61284-1997, IEC 60353-2002,IEC 60437-1997, IEC61869-1-2007, IEC61869-2-2012, IEC 61869-3
2167ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc/Pin/Post and Similar Insulating Materials. Also ItemsLike Battery Containers, Rubber Mats, Rating from 1kV To110kV (Inclusive).
Power Frequency puncturewithstand voltage test
IS 731 2016, IS 2544 /2006, IS1445/ 2009, IS 4318/ 2009, IEC60383-1 1993, IEC 60383-21993, ANSI C29.2/ 1992, C29.5
2168ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc/Pin/Post/Solid Core Rating from 1kV To 36kV(Inclusive).
Electro Mechanical Failing LoadTest
IS 731 2016, IS 2544/ 2006,IEC 60383-1 1993, IEC 601681998 A2 2000, IEC 60433/
2169ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc/Pin/Post/Solid Core Ratings From 1kV To 36kV(Inclusive).
Electro Mechanical Failing LoadTest
IS 731 2016, IS 2544 /2006,IEC 60383-1 1993, IEC 60168/1998 A2 2000, IEC 60433/
2170ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc/Pin/Post/Solid core/ Hollow insulator, insulator strings(All Types) Rating 3.6kV to 400kV (Inclusive) Impulse flashover
IS 692/ 2010, IS 731 /2016, IS1180/ 2014, IS 2544 /2006, IS1445/ 2009, IS 2071/2016, IS2099/2008, IS 4318/ 2009, IS8269/2009, IS 9431/2009, IEC60168/ A2 2000, IEC60243-3/2013, BS 159/1992,BSEN 171/2002, ANSIC29.1/1988, ANSI C29.2/1992,ANSI C29.3/1986, ANSIC29.4/1984, ANSI C29.5/1984,ANSI C29.6/1984, ANSIC29.7a/1986, ANSI C29.9/
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 191 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2171ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc/Pin/Post/Solid Core/ Insulator Ratings of 1kV to 36kV Mechanical Failing Load Test:IS 731 2016, IS 2544 2006, IEC60168 1998 A2 2000, IEC60383-1 1993, IEC 60433
2172ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc/Pin/Post/Solid Core/Hollow Insulator, Insulator Strings(All Types) Lightning Arrester Housings And SimilarInsulating Materials. Ratings up To 425kV (Inclusive). A. B.Switches /Isolator/Circuit Breaker/Bus Duct /Cable/Bushing /Panel/Horn Gap/Dropout Fuse Unit. Ratings up To 420 kV(Inclusive) P T/ C V T /Coupling capacitor/TapChangers/Grading Capacitors /R.V.T.S/ C.T - PT Units.Ratings up To 420kV (Inclusive). Series Reactors, LineTraps. Tuning Reactors & Neutral Earthing Reactors up To400kV (Inclusive) Current Transformers up To 420 kVrating(Inclusive) Power/Distribution Transformers IncludingEarthing Transformers Auto transformers etc. Up to andInclusive of 1kVA to 100MVA Rating. 1kV to 220kV(Inclusive).
Impulse Withstand VoltageTest
IS 692/ 2010, IS 731/ 2016, IS1180/ 2014, IS 2544 /2006, IS1445/ 2009, IS 2026-3 /2009,IEC 76-3/ 2013, IS 2071/ 2016,IS 2099/ 2008, IS 2705-1-2-3/2007, IS 13925 /2012 A12017, IS 3070-3/ 2009, IS 3151/2016, IS 16227-2 /2016, IS3427/ 2007, IS 4318 /2009, IS5300/ 2009, IS 5424/ 2004, IS5553-1-2-3-4-5 /2009, IS7098-1-2-3 /2015/2014, IS8084 /2017, IS 8269 /2009, IS8468 /2016, IS 8792/ 2008, IS8793/ 2008, IS 9147/ 2016,IS9348/ 2008, IS 9385/ 2018, IS9431 /2009, IS 10810 part 45 &47/ 2
2173ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc/Pin/Post/Solid Core/Hollow Insulator, Insulator Strings(All Types) Lightning Arrester Housings. Ratings upto 420kV(Inclusive).
Porosity test (on porcelaininsulators)
IS 731/ 2016, IS 1445 /2009, IS3070-3 /2009, IS 2544 /2006,IS 5300 /2009, IS 5621 /2009,IEC 60168 /1994, IEC 60305/1995/ 2018, IEC 60383-1/1993, IEC 60383-2 /1993, ANSIC29.1/1992, C29.2/1992,C29.3/ 1986, C29.4 /1989,C29.5 /1984, C29.6 /1984,C29.7a /1983, C29.9/
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 192 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2174ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc/Pin/Post/Solid Core/Hollow Insulator, Insulator Strings(All Types) Lightning Arrester Housings Insulating Rod/Operating Rod For 220kV to 420kV (Inclusive) RepairSleeves Rated Above 1kV to 420kV (Inclusive) ThyristorValves 11kV to 35kV Systems.
Power Frequency FlashoverTest (Dry & Wet)
IS 692/ 2010, IS 731/ 2016, IS1180/ 2014, IS 2544 /2006, IS1445/ 2009, IS 2071 /2016, IS2099/ 2008, IS 4318 /2009, IS8269 / 2009,IS 9431/ 2009, IEC60099-4 / 2014, IS 2584 /2007,IS 5621/ 2004, IEC 62271-102:2001, IEC 60137 2003, IEC60168 2001, IEC 60383-1/1993, IEC 60383-2/ 1993, IEC61109 /2010, IEC 62217/ 2005,RDSO SPEC 4318/ 1993, IEC60433 /1998, IEC62271-203-11/ 2003, ANSIC29.1/ 1988, ANSI C29.2/ 92,C29.3/86, C29.4/84, C29.5/84,C29.6/84, C29.7a/86, C29.9/83,IEEE -4 /1995, BS 1
2175ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc/Pin/Post/Solid Core/Hollow Insulator, Insulator Strings(All Types) Lightning Arrester Housings and InsulatingTubes etc., rated 3.6kV to 400kV (inclusive).
Visible Discharge Test IS 731/ 2016, IS 4318 /2009 IS2071/ pt.1 2016,
2176ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc/Pin/Post/Solid Core/Hollow Insulator, Insulator Strings(All Types) Lightning Arrester Housings And SimilarInsulating Materials. Ratings up To 425kV (Inclusive). A. B.Switches /Isolator/Circuit Breaker/Bus Duct /Cable/Bushing /Panel/Horn Gap/Dropout Fuse Unit. Ratings up To 420 kV(Inclusive) P T/ C V T /Coupling capacitor/TapChangers/Grading Capacitors /R.V.T.S/ C.T - PT Units.Ratings up To 420kV (Inclusive). Series Reactors, LineTraps. Tuning Reactors & Neutral Earthing Reactors up To400kV (Inclusive) Current Transformers up To 420 kVrating(Inclusive) Power/Distribution Transformers IncludingEarthing Transformers Auto transformers etc. Up to andInclusive of 1kVA to 100MVA Rating. 1kV to 220kV(Inclusive).
Impulse Withstand VoltageTest
IEC 60433 /1998, IEC62271-203 /2011, IEC 62271-12017, IEEE -4 /1995, BS 159/1992, BS 223 /1985, BS ISO2692/ 1988, BS3297-2/1993,BS 3938/1973, BS3941/ 1975, BS 6581/ 1995,BSEN 171 2002, IEC 60282-12009 A1 2014, ANSI C29.1/1988, ANSI C29.2/ 92,C29.3/86, C29.4/84, C29.5/84,C29.6/84, C29.7a/86, C29.9/83,NBR 5356-3/
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 193 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2177ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc/Pin/Post/Solid Core/Hollow Insulator, Insulator Strings(All Types) Lightning Arrester Housings And SimilarInsulating Materials. Ratings up To 425kV (Inclusive). A. B.Switches /Isolator/Circuit Breaker/Bus Duct /Cable/Bushing /Panel/Horn Gap/Dropout Fuse Unit. Ratings up To 420 kV(Inclusive) P T/ C V T /Coupling capacitor/TapChangers/Grading Capacitors /R.V.T.S/ C.T - PT Units.Ratings up To 420kV (Inclusive). Series Reactors, LineTraps. Tuning Reactors & Neutral Earthing Reactors up To400kV (Inclusive) Current Transformers up To 420 kVrating(Inclusive) Power/Distribution Transformers IncludingEarthing Transformers Auto transformers etc. Up to andInclusive of 1kVA to 100MVA Rating. 1kV to 220kV(Inclusive).
Impulse Withstand VoltageTest
IS 13573/ 2008, IEC 61869-1/2007, IEC 60076-1/ 2011, IEC60076-3 /2013 A1 2018, IEC60099-4 /2014, IEC 62271-102/2018, IEC 60137/ 2008, IEC60168/ A2 2000, IEC 61689-2/2012-09, IEC 61869-3/2011-07, IEC 61869-4 /2013,IEC 61869-5/2011-07, IEC60214 /2014, IEC 60243-3/2001, IEC 265-2/1988, IEC60282-1 /1988, IEC 60282-2/1997,IEC 60289/1988, IEC62271-200/ 2011, IEC 60353/1989 A1 2002, IEC 60358/2012, IEC 60383-1 /1993, IEC60383-2/ 1993, IEC 61109/2012, IEC 62217/ 2012, RDSOSPEC 4318
2178ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc/Pin/Post/Solid Core/Hollow Insulator, Insulator Strings(All Types) Lightning Arrester Housings Ratings up To425kV (Inclusive). Isolator/Circuit Breaker/Bus Duct/Cable/Bushing / Panel/Horn Gap/Dropout Fuse Unit, ABswitches. Ratings From 1 kV To 420 kV (Inclusive) P T/ C V TCapacitors/ Grading Capacitors/C.T - PT Units. Ratings From1 kV To 420kV (Inclusive). Series Reactors, Line Traps.Damping Reactors Tuning Reactors Ratings up To 400kV(Inclusive) Current Transformers/H.T. Capacitors/Gradingcapacitor. 3.6kV Rating To 420kV Rating (Inclusive).Distribution Transformers Earthing transformer, Autotransformer etc. Ratings 1 kVA To 75MVA (Inclusive).( 1kVTo 220 kV Inclusive) Lightning Arresters Ratings Above 1kVTo 245kV (Inclusive). Bushings / Power Connectors,Compression Joints, Repair Sleeves Rated Above 145 kV To420kV( Inclusive )
Radio Interference VoltageTest (Dry & Wet).
IS 8263 2018, IEC 62271-12017,IEC 62271-102 2018, IEC60437 1997, IEC 60437 1997,IEC 60383-1 1993, IEC 60383-21993, ANSI C29-1 1992, C29-21992, C.29-5 1994, C29-91983, NEMA 107
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 194 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2179ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc/Pin/Post/Solid Core/Hollow Insulator, Insulator Strings(All Types) Lightning Arrester Housings Ratings up To425kV (Inclusive). Isolator/Circuit Breaker/Bus Duct/Cable/Bushing / Panel/Horn Gap/Dropout Fuse Unit, ABswitches. Ratings From 1 kV To 420 kV (Inclusive) P T/ C V TCapacitors/ Grading Capacitors/C.T - PT Units. Ratings From1 kV To 420kV (Inclusive). Series Reactors, Line Traps.Damping Reactors Tuning Reactors Ratings up To 400kV(Inclusive) Current Transformers/H.T. Capacitors/Gradingcapacitor. 3.6kV Rating To 420kV Rating (Inclusive).Distribution Transformers Earthing transformer, Autotransformer etc. Ratings 1 kVA To 75MVA (Inclusive).( 1kVTo 220 kV Inclusive) Lightning Arresters Ratings Above 1kVTo 245kV (Inclusive). Bushings / Power Connectors,Compression Joints, Repair Sleeves Rated Above 145 kV To420kV( Inclusive )
Radio Interference VoltageTest(Dry & Wet).
IS 8263 2018, IEC 62271-12017,IEC 62271-102 2018, IEC60437 1997, IEC 60437 1997,IEC 60383-1 1993, IEC 60383-21993, ANSI C29-1 1992, C29-21992, C.29-5 1994, C29-91983, NEMA 107: 2016
2180ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc/Pin/Post/Solid Core/Hollow Insulator, Insulator Strings(All Types) Lightning Arrester Housings. Also Items LikeBattery Containers, Rubber Mats, Insulating Tubes Etc.Rated 3.6kV to 400kV (Inclusive). Insulating Rod /OperatingRod For 220kV To 420 kV (Inclusive ). Isolator/CircuitBreaker/Bus Duct /Cable/Bushing / Panel/Horn Gap/DropoutFuse Unit, AB switches. Ratings up To 420kV (Inclusive). PT/ C V T /Coupling /Tap Changers, Capacitors/GradingCapacitors/R.V.T.S/C.T - PT Units. Ratings up To 420kV(Inclusive). Series Reactors, Line Traps. Damping ReactorsTuning Reactors & Neutral Earthing Reactors. 1.1kV To 400kV (Inclusive). Power/Distribution Transformers IncludingEarthing Transformers Autotransformers etc. up to AndInclusive of 1kVA to 100MVA Rating. (1 kV to 420kVInclusive). Lightning Arresters, Lightning arrester HousingRatings above 1 kV to 420kV (Inclusive). Bushings /RepairSleeves rated above 1kV To 420kV( Inclusive ) ThyristorValves 11kV to 35kV Systems.
Power Frequency WithstandTest (Dry & Wet)
IEC 60433 /1998, IEC62271-203 /2011, IEC 62271-1/2017, IEEE -4 /1995, BS 159/1992, BS 223 /1985, BS ISO2692/ 1988, BS3297-2/1993,BS 3938/1973, BS3941/ 1975, BS 6581/ 1995,BSEN 171 2002, IEC 60282-12009 A1 2014, ANSI C29.1/1988, ANSI C29.2/ 92,C29.3/86, C29.4/84, C29.5/84,C29.6/84, C29.7a/86, C29.9/83,NBR 5356-3/2003, IEC62271-103/2011 & 107/2012,IEC 60099-8/2017, IEC62271-104/2009, IS2584/2016, IS 5621/2014, IS13770/2009, IS 13772/2017, IS13773/2014, IS 13961/
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 195 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2181ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc/Pin/Post/Solid Core/Hollow Insulator, Insulator Strings(All Types) Lightning Arrester Housings. Also Items LikeBattery Containers, Rubber Mats, Insulating Tubes Etc.Rated 3.6kV to 400kV (Inclusive). Insulating Rod /OperatingRod For 220kV To 420 kV (Inclusive ). Isolator/CircuitBreaker/Bus Duct /Cable/Bushing / Panel/Horn Gap/DropoutFuse Unit, AB switches. Ratings up To 420kV (Inclusive). PT/ C V T /Coupling /Tap Changers, Capacitors/GradingCapacitors/R.V.T.S/C.T - PT Units. Ratings up To 420kV(Inclusive). Series Reactors, Line Traps. Damping ReactorsTuning Reactors & Neutral Earthing Reactors. 1.1kV To 400kV (Inclusive). Power/Distribution Transformers IncludingEarthing Transformers Autotransformers etc. up to AndInclusive of 1kVA to 100MVA Rating. (1 kV to 420kVInclusive). Lightning Arresters, Lightning arrester HousingRatings above 1 kV to 420kV (Inclusive). Bushings /RepairSleeves rated above 1kV To 420kV( Inclusive ) ThyristorValves 11kV to 35kV Systems.
Power Frequency WithstandTest(Dry & Wet)
IS 692/ 2010, IS 731/ 2016, IS1180/ 2014, IS 2544 /2006, IS1445/ 2009, IS 2026-3 /2009,IEC 76-3/ 2013, IS 2071/ 2016,IS 2099/ 2008, IS 2705-1-2-3/2007, IS 13925 /2012 A12017, IS 3070-3/ 2009, IS 3151/2016, IS 16227-2 /2016, IS3427/ 2007, IS 4318 /2009, IS5300/ 2009, IS 5424/ 2004, IS5553-1-2-3-4-5 /2009, IS7098-1-2-3 /2015/2014, IS8084 /2017, IS 8269 /2009, IS8468 /2016, IS 8792/ 2008, IS8793/ 2008, IS 9147/ 2016, IS9348/ 2008, IS 9385/ 2018, IS9431 /2009, IS 10810 part 45 &47/
2182ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc/Pin/Post/Solid Core/Hollow Insulator, Insulator Strings(All Types) Lightning Arrester Housings. Also Items LikeBattery Containers, Rubber Mats, Insulating Tubes Etc.Rated 3.6kV to 400kV (Inclusive). Insulating Rod /OperatingRod For 220kV To 420 kV (Inclusive ). Isolator/CircuitBreaker/Bus Duct /Cable/Bushing / Panel/Horn Gap/DropoutFuse Unit, AB switches. Ratings up To 420kV (Inclusive). PT/ C V T /Coupling /Tap Changers, Capacitors/GradingCapacitors/R.V.T.S/C.T - PT Units. Ratings up To 420kV(Inclusive). Series Reactors, Line Traps. Damping ReactorsTuning Reactors & Neutral Earthing Reactors. 1.1kV To 400kV (Inclusive). Power/Distribution Transformers IncludingEarthing Transformers Autotransformers etc. up to AndInclusive of 1kVA to 100MVA Rating. (1 kV to 420kVInclusive). Lightning Arresters, Lightning arrester HousingRatings above 1 kV to 420kV (Inclusive). Bushings /RepairSleeves rated above 1kV To 420kV( Inclusive ) ThyristorValves 11kV to 35kV Systems.
Power Frequency WithstandVoltage Test (Dry & Wet)
IS 13573/ 2008, IEC 61869-1/2007, IEC 60076-1/ 2011, IEC60076-3 /2013 A1 2018, IEC60099-4 /2014, IEC 62271-102/2018, IEC 60137/ 2017, IEC60168/ A2 2000, IEC 61689-2/2012-09, IEC 61869-3/2011-07, IEC 61869-4 /2013,IEC 61869-5/2011-07, IEC60214 /2014, IEC 60243-3/2013, IEC 265-2/1988, IEC60282-1 /1988, IEC 60282-2/1997,IEC 60289/1988, IEC62271-200/ 2011, IEC 60353/1989 A1 2002, IEC 60358/2012, IEC 60383-1 /1993, IEC60383-2/ 1993, IEC 61109/2012, IEC 62217/ 2012, RDSOSPEC 4318
2183ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc/Pin/Post/Solid Core/Hollow Insulator, Lightning ArresterHousings Ratings up To 110kV (Inclusive).
Temperature cycle (onporcelain Insulators)
IS 731/ 2016, IS 1445 /2009, IS2544 /2006, IS 4318 /2009, IS5300 /2009, IS 5621 /2009, IEC60383-1 /1993, IEC 60383-2/1993, ANSI C29.1 /1992,C29.2/1992,C29.5/1984,C29-6/84,C29.7a/1983, C29.9/1983,C-57.12.00
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 196 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2184ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Disc/Pin/Post/Solid Core/Hollow Insulator, Railway insulator,Insulator Strings (All Types) Long rod insulators, Isolators,AB switches, Circuit Breakers, Reactors, Line Traps, Repairsleeves, Spacers, Spacer dampers, ACSR conductor andaccessories. Rated 3.6kV to 400kV (inclusive)
Corona Inception /ExtinctionTest
IS:731/2016, IS:2071(part1)/2016, RDSO SPEC4318, IEC 60060-1/2013 ANSIC29.1/1988, ANSI C29.2/1992ANSI C29.3/1986, ANSIC29.4/1984, ANSI C29.5/1984,ANSI C29.6/1984, ANSIC29.7a/1986, ANSI C29.9/1983IS : 10162/1982 RA2018, IS :4318/ 2009, IS : 398(Part 5) RA2007, IS : 2544/
2185ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Electrical materials - Magnetic materials (CRGO) Stacking factor. IS 3024 cl.10.1 2015, IS 6492007, IEC 60404-13
2186ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Electrical materials - Magnetic materials (CRGO) Core Loss by Epstein test &Single sheet tester
IS 3024 cl.8.1 2015, IS 649 cl.10.6 2007, IEC 60404-2 2008,IEC 60404-3
2187ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Electrical materials - Magnetic materials (CRGO) Ductility. IS 3024 2015 cl.10.2, IS 649
2188ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Electrical materials - Magnetic materials (CRGO)Magnetic polarization. ByEpstein test & Single sheettester.
IS 3024 cl.8.2 2015, IS 649 cl.10.6 2007, IEC 60404-2 2008,IEC 60404-3
2189ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Electrical materials - Magnetic materials (CRGO) Surface insulation resistivityIS 3024 cl.9 2015, IS 6492007,IS 648-2010, IEC60404-11
2190ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Electrical materials - Magnetic materials (CRGO) Dimensions – Length, widthand thickness.
IS 3024 2015 cl.11, IS 6492007,Cl.8.1-IS 648,Cl.8.2-IS648,Cl.8.3-IS 648, IEC60404-8-7
2191ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Inhibited and Uninhibited mineral insulating oilAgeing characteristics DDF at90°C Resistivity at 27°CResistivity at 90°C
IS 12177
2192ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Inhibited and Uninhibited mineral insulating oilAgeing characteristics DDF at90°C Resistivity at 27°CResistivity at 90°C
IS 12177
2193ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Inhibited and Uninhibited mineral insulating oil Dielectric Dissipation Factor IS 6262 2016, IEC 60247
2194ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Inhibited and Uninhibited mineral insulating oil Electric Strength IS 6792 2013 , IEC 60156
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 197 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2195ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Inhibited and Uninhibited mineral insulating oil Oxidation stability DDF at 90°C IEC 61125
2196ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Inhibited and Uninhibited mineral insulating oilSpecific Resistance(Resistivity) at 27°C and at90°C
IS 6103 2016, IEC 60247
2197ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Insulator Strings Power Arc tests IEC 61467
2198ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Insulator Strings Power Arc tests IEC 61467
2199ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Insulator Strings of all types upto 420kV Voltage Distribution Test Generally as per IS 2071 (pt 1)/1993 RA 2006, IEC 60060-1/
2200ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Insulator strings, Post insulators, railway insulators, Longrod insulators, Isolators, Disconnectors, AB switches, CircuitBreakers, reactors, Line traps, Repair sleeves, spacers,spacer dampers, ACSR conductor & accessories - ratingfrom 3.6kV to 400kV (Inclusive)
Corona Inception/ ExtinctionTest
ANSI /IEEE C29-2A-2013, ANSI/IEEE C29-2B-2013, ANSI /IEEEC29-3-2015, ANSI /IEEEC29-4-2015, ANSI /IEEEC29-5-2015, ANSI /IEEEC29-6-2015, ANSI /IEEEC29-7-2015, ANSI /IEEEC29-8-2017, ANSI /IEEE C29-9
2201ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Insulator strings, Post insulators, railway insulators, Longrod insulators, Isolators, Disconnectors, AB switches, CircuitBreakers, reactors, Line traps, Repair sleeves, spacers,spacer dampers, ACSR conductor & accessories - ratingfrom 3.6kV to 400kV (Inclusive)
Corona Inception/ ExtinctionTest
IS 731:2016, IS 2121 (Part2):2018, IS 4318:2018, IS 398(part 5):2018, IEC60060-1-2010, IEC61284-1997, IEC 60353-2002,IEC 62271-1-2017, IEC62271-102-2018, IEC60437-1997, IEC60383-1-1993, IEC60383-2-1993, RDSO Spec.TI/SPC/OHE/INS/0070,TI/SPC/OHE/POST/0100(01)/2020, ETI/OHE/51(9/87)/1992,ETI/PSI/117(7/88)/1988,ET/OHE/15(9/91)/1991, VDE0278-628-2002, VDE078-629-1- 2009, ANSI /IEEEC29-1
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 198 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2202ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Insulators/Bushings, Circuit Breakers/Lightning Arresters,housings of CVT, C.T’s, P.T’s, Ceramic and Glass Insulatorto be used as Outdoor exposed to Polluted OutdoorAtmosphere
Pollution performanceIS 8704/ 2016, IEC 60507/2013, IEC 61109 /2008, IEEEC62.11/
2203ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Kraft Paper, Press Board Degree of Polymerization ASTM D 4243
2204ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester Blocks/section Ratings From 3kV To 12kV(Inclusive)
Duty cycle test / Switchingsurge energy rating test/ SingleImpulse Withstand rating Test
IEEE C62.11
2205ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester Blocks/section Ratings From 3kV To 12kV(Inclusive) Operating Duty test
IEC 60099-4 /2014, IEC60099-4/2009, IS15086-4/2017, IS 3070 (part3)/1993 RA
2206ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester Blocks/sections Rating from 3kV to 12kVDuty cycle test/Switching surgeenergy rating Test/ SingleImpulse withstand rating Test
IEEE C62.11/
2207ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester Blocks/sections Rating from 3kV to 12kV(Inclusive) Operating Duty Test
IEC 60099-4 /2014, IEC60099-4/2009, IS15086-4/2017, IS 3070 (part3)/1993 RA
2208ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester Blocks/sections Ratings From 3kV To12kV (Inclusive) Lightning arrester units Ratings From 9kVTo 400kV (Inclusive)
Discharge-voltagecharacteristics test IEEE C62.11-2012
2209ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester Blocks/sections Ratings From 3kV To12kV (Inclusive) Lightning arrester units Ratings From 9kVTo 400kV (Inclusive)
Discharge-voltagecharacteristics test IEEE C62.11-2012
2210ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester Blocks/sections Ratings From 3kV To12kV (Inclusive) Lightning arrester units Ratings From 9kVTo 400kV (Inclusive)
Discharge-voltagecharacteristics test IEEE C62.11-2012
2211ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester Blocks/sections Ratings From 3kV To12kV (Inclusive) Lightning arrester units Ratings From 9kVTo 400kV (Inclusive)
Discharge-voltagecharacteristics test IEEE C62.11-2012
2212ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester Blocks/sections Ratings From 3kV To12kV (Inclusive) Lightning arrester units Ratings From 9kVTo 400kV (Inclusive)
Discharge-voltagecharacteristics test IEEE C62.11-2012
2213ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester Blocks/sections Ratings From 3kV To12kV (Inclusive) Lightning arrester units Ratings From 9kVTo 400kV (Inclusive)
High current impulse Residualvoltage test/ High currentimpulse withstand test
IEC 60099-8 2011, Edition 1.0
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 199 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2214ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester Blocks/sections Ratings From 3kV To12kV (Inclusive) Lightning arrester units Ratings From 9kVTo 400kV (Inclusive)
High current impulse Residualvoltage test/ High currentimpulse withstand test
IEC 60099-8 2011, Edition 1.0
2215ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester Blocks/sections Ratings From 3kV To12kV (Inclusive) Lightning arrester units Ratings From 9kVTo 400kV (Inclusive)
High-current short-durationwithstand test IEEE C62.11-2012
2216ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester Blocks/sections Ratings From 3kV To12kV (Inclusive) Lightning arrester units Ratings From 9kVTo 400kV (Inclusive)
High-current short-durationwithstand test IEEE C62.11-2012
2217ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester Blocks/sections Ratings From 3kV To12kV (Inclusive) Lightning arrester units Ratings From 9kVTo 400kV (Inclusive)
Lightning Current ImpulseResidual Voltage Test IEC 60099-8 2011, Edition 1.0
2218ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester Blocks/sections Ratings From 3kV To12kV (Inclusive) Lightning arrester units Ratings From 9kVTo 400kV (Inclusive)
Lightning Current ImpulseResidual Voltage Test IEC 60099-8 2011, Edition 1.0
2219ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester Blocks/sections Ratings From 3kV To12kV (Inclusive) Lightning arrester units Ratings From 9kVTo 400kV (Inclusive)
Lightning Impulse ResidualVoltage Test
IEC 60099-4/ 2009 Edition 2.2,IEC 60099-4/ 2014 Edition 3.0,IS 15086-4 2017, IS 3070 (Part3) 1993 RA
2220ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester Blocks/sections Ratings From 3kV To12kV (Inclusive) Lightning arrester units Ratings From 9kVTo 400kV (Inclusive)
Lightning Impulse ResidualVoltage Test
IEC 60099-4/ 2009 Edition 2.2,IEC 60099-4/ 2014 Edition 3.0,IS 15086-4 2017, IS 3070 (Part3) 1993 RA
2221ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester Blocks/sections Ratings From 3kV To12kV (Inclusive) Lightning arrester units Ratings From 9kVTo 400kV (Inclusive)
Lightning Impulse ResidualVoltage Test
IEC 60099-4/ 2009 Edition 2.2,IEC 60099-4/ 2014 Edition 3.0,IS 15086-4 2017, IS 3070 (Part3) 1993 RA
2222ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester Blocks/sections Ratings From 3kV To12kV (Inclusive) Lightning arrester units Ratings From 9kVTo 400kV (Inclusive)
Lightning Impulse ResidualVoltage Test
IEC 60099-4/ 2009 Edition 2.2,IEC 60099-4/ 2014 Edition 3.0,IS 15086-4 2017, IS 3070 (Part3) 1993 RA
2223ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester Blocks/sections Ratings From 3kV To12kV (Inclusive) Lightning arrester units Ratings From 9kVTo 400kV (Inclusive)
Lightning Impulse ResidualVoltage Test
IEC 60099-4/ 2009 Edition 2.2,IEC 60099-4/ 2014 Edition 3.0,IS 15086-4 2017, IS 3070 (Part3) 1993 RA
2224ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester Blocks/sections Ratings From 3kV To12kV (Inclusive) Lightning arrester units Ratings From 9kVTo 400kV (Inclusive)
Switching Impulse ResidualVoltage Test
IEC 60099-4/ 2009 Edition 2.2,IEC 60099-4/ 2014 Edition 3.0,IS 15086-4 2017, IS 3070 (Part3) 1993 RA 2014
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 200 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2225ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester Blocks/sections Ratings From 3kV To12kV (Inclusive) Lightning arrester units Ratings From 9kVTo 400kV (Inclusive)
Switching Impulse ResidualVoltage Test
IEC 60099-4/ 2009 Edition 2.2,IEC 60099-4/ 2014 Edition 3.0,IS 15086-4 2017, IS 3070 (Part3) 1993 RA 2014
2226ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester Blocks/sections Ratings From 3kV To12kV (Inclusive) Lightning arrester units Ratings From 9kVTo 400kV (Inclusive)
Switching Impulse ResidualVoltage Test
IEC 60099-4/ 2009 Edition 2.2,IEC 60099-4/ 2014 Edition 3.0,IS 15086-4 2017, IS 3070 (Part3) 1993 RA 2014
2227ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester Blocks/sections Ratings From 3kV To12kV (Inclusive) Lightning arrester units Ratings From 9kVTo 400kV (Inclusive)
Switching Impulse ResidualVoltage Test
IEC 60099-4/ 2009 Edition 2.2,IEC 60099-4/ 2014 Edition 3.0,IS 15086-4 2017, IS 3070 (Part3) 1993 RA 2014
2228ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester Blocks/sections Ratings From 3kV To12kV (Inclusive)
Long Duration current ImpulseWithstand Test
IEC 60099-4/ 2009 Edition 2.2,IS 3070 (Part 3) 1993 RA 2014
2229ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester Blocks/sections Ratings From 3kV To12kV (Inclusive)
Long Duration current ImpulseWithstand Test
IEC 60099-4/ 2009 Edition 2.2,IS 3070 (Part 3) 1993 RA 2014
2230ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester Blocks/sections Ratings From 3kV To12kV (Inclusive)
Low current long durationwithstand test/Temporaryovervoltage (TOV) test
IEEE C62.11
2231ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester Blocks/sections Ratings From 3kV To12kV (Inclusive)
Low current long durationwithstand test/Temporaryovervoltage (TOV) test
IEEE C62.11-
2232ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester Blocks/sections Ratings From 3kV To12kV (Inclusive)
Power frequency voltageversus time characteristics ofan arrester
IEC 60099-4/ 2009 Edition 2.2,IS 3070 (Part 3) 1993 RA
2233ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester Blocks/sections Ratings From 3kV To12kV (Inclusive)
Power frequency voltageversus time characteristics ofan arrester
IEC 60099-4/ 2009 Edition 2.2,IS 3070 (Part 3) 1993 RA
2234ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester Blocks/sections Ratings From 3kV To12kV (Inclusive)
Power frequency voltageversus time test
IEC 60099-4/ 2014 Edition 3.0,IS 15086-4
2235ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester Blocks/sections Ratings From 3kV To12kV (Inclusive)
Power frequency voltageversus time test
IEC 60099-4/ 2014 Edition 3.0,IS 15086-4
2236ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester Blocks/sections Ratings From 3kV To12kV (Inclusive)
Steep Current Impulse ResidualVoltage Test
IEC 60099-4/ 2009 Edition 2.2,IEC 60099-4/ 2014 Edition 3.0,IS 15086-4 2017, IS 3070 (Part3) 1993 RA 2014
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 201 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2237ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester Blocks/sections Ratings From 3kV To12kV (Inclusive)
Steep Current Impulse ResidualVoltage Test
IEC 60099-4/ 2009 Edition 2.2,IEC 60099-4/ 2014 Edition 3.0,IS 15086-4 2017, IS 3070 (Part3) 1993 RA 2014
2238ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester Blocks/sections Ratings From 3kV To12kV (Inclusive)
Test to verify Repetitive chargetransfer rating
IEC 60099-4/ 2014 Edition 3.0,IS 15086-4 2017
2239ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester Blocks/sections Ratings From 3kV To12kV (Inclusive)
Test to verify Repetitive chargetransfer rating
IEC 60099-4/ 2014 Edition 3.0,IS 15086-4 2017
2240ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester Blocks/sections Ratings From 3kV To 8kV(Inclusive) Accelerated ageing test
IEC 60099-4/ 2009 Edition 2.2,IS 3070 (Part 3) 1993 RA 2014,IEC 60099-8/ 2011, Edition 1.0,
2241ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester Blocks/sections Ratings From 3kV To 8kV(Inclusive)
Accelerated aging test ofvaristors IEEE C62.11
2242ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester Blocks/sections Ratings From 3kV To 8kV(Inclusive)
Test to verify Long TermStability under continuousoperating voltage
IEC 60099-4/ 2014 Edition 3.0,IS 15086-4
2243ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester units Ratings From 3kV To 400kV(Inclusive)
Heat dissipation behaviorverification of the test sample IEC 60099-4
2244ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester units Ratings From 3kV To 400kV(Inclusive)
Test to verify thermalequivalency between completearrester and arrester section.
IEC 60099-4/ 2009 Edition 2.2,IS 3070 (Part 3) 1993 RA
2245ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester/unit/ block Ratings From 3kV To 1200kV(Inclusive)
Measurement of referenceVoltage
IEC 60099-4 /2009, IEC60099-4 /2014, IS 3070 part 3/2014, IEC 60099-8/2011 Ed 1,IEEE C62.11
2246ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester/unit/ block Ratings From 3kV To 1200kV(Inclusive)
Measurement of referenceVoltage
IEC 60099-4- 2009 Edition 2.2,IEC 60099-4-2014 Edition 3.0,IS 15086-4 -2017, IS 3070 (Part3) :1993 RA 2014, IEC60099-8-2011, Edition 1.0,IEEE C62.11
2247ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester/unit/ block Ratings From 3kV To 1200kV(Inclusive)
Measurement of referenceVoltage
IEC 60099-4- 2009 Edition 2.2,IEC 60099-4-2014 Edition 3.0,IS 15086-4 -2017, IS 3070 (Part3) :1993 RA 2014, IEC60099-8-2011, Edition 1.0,IEEE C62.11
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 202 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2248ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester/unit/ block Ratings From 3kV To 1200kV(Inclusive) Power loss Measurement
IEC 60099-4 /2009, IEC60099-4 /2014, IS 3070 part3/1993 RA 2014, IEC60099-8/2011, IEEE C62.11/
2249ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester/unit/ block Ratings From 3kV To 1200kV(Inclusive) Power loss Measurement
IEC 60099-4- 2009 Edition 2.2,IEC 60099-4-2014 Edition 3.0,IS 15086-4 -2017, IS 3070 (Part3) :1993 RA 2014, IEC60099-8-2011, Edition 1.0,IEEE C62.11
2250ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester/unit/ block Ratings From 3kV To 1200kV(Inclusive) Power loss Measurement
IEC 60099-4- 2009 Edition 2.2,IEC 60099-4-2014 Edition 3.0,IS 15086-4 -2017, IS 3070 (Part3) :1993 RA 2014, IEC60099-8-2011, Edition 1.0,IEEE C62.11
2251ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester/unit/ block Ratings From 3kV To 1200kV(Inclusive)
Resistive / leakage currentMeasurement
IEC 60099-4- 2009 Edition 2.2,IEC 60099-4-2014 Edition 3.0,IS 15086-4 -2017, IS 3070 (Part3) :1993 RA 2014, IEC60099-8-2011, Edition 1.0,IEEE C62.11
2252ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester/unit/ block Ratings From 3kV To 1200kV(Inclusive)
Resistive / leakage currentMeasurement
IEC 60099-4- 2009 Edition 2.2,IEC 60099-4-2014 Edition 3.0,IS 15086-4 -2017, IS 3070 (Part3) :1993 RA 2014, IEC60099-8-2011, Edition 1.0,IEEE C62.11: 2020
2253ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning arrester/unit/ block Ratings From 3kV To 1200kV(Inclusive)
Resistive leakage currentMeasurement
IEC 60099-4/ 2009 Edition 2.2,IEC 60099-4/ 2014 Edition 3.0,IS 15086-4 2017, IS 3070 (Part3) 1993 RA 2014IEC 60099-8/2011, Edition 1.0, IEEE C62.11
2254ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning Arresters Ratings 1kV To 245 kV (Inclusive). Power Frequency Spark over(Dry & Wet). IS 3070-3 2009, IEC 60099-1
2255ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning Arresters Ratings up To 245 kV (Inclusive). Front of wave Spark over. IS 3070-3 2009, IEC 60099-1
2256ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Lightning Arresters Ratings up To 245 kV (Inclusive). Lightning Impulse Spark over. IS 3070 2009, IEC 60099-1
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 203 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2257ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Oil, solid and powder samples Thermal conductivity IS022007-2
2258ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Polymeric Insulation Viz. PE, PP, HDPE and allied materials Permittivity & DissipationFactor
ASTM D 150-18, IS 4486:1967RA
2259ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Polymeric insulator/ Composite insulatorDisc/Pin/Post/hollow Insulating Materials. Ratings up To400kV (Inclusive).
Steep front impulse flash overIEC 61109/ 2008, IEC 62217/2012, IEC 61462 /2007, CIGRE23-07, CAN/CSA C411.1 M89,RDSO SPEC 4318
2260ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Polymeric insulators from 1kV to 145kV Assembled core load time test IEC 61109 2008, IEC 62217
2261ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Polymeric insulators from 1kV to 145kV Assembled core load time test IEC 61109/2008, IEC 62217
2262ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Polymeric insulators from 1kV to 145kV Damage limit proof test. IEC 61109 2008, IEC 62217
2263ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Polymeric insulators from 1kV to 145kV Damage limit proof test. IEC 61109/2008, IEC 62217
2264ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Polymeric MaterialsCoefficient of Linear ThermalExpansion by TMA (Up to900°C)
ASTM E 831
2265ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Polymeric Materials Compositional Analysis by TGA ASTM E 1131
2266ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Polymeric Materials FTIR Spectrometric analysis ASTM E 1252 -98
2267ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Polymeric Materials Glass Transition MeltingTemperature by DSC ASTM D 3418
2268ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Polymeric Materials Heat Distortion temperature
ASTM D648, ISO 75-1, ISO75-2, IS 13779:1999, IS14697:1999, IS 13360- part 6,sec 17- 2017, IS15884:2010,IS16444 (Part-1):2015, CBIP325, IS16444 (Part-2)
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 204 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2269ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Polymeric MaterialsThermal Analysis –Decomposition by TGA up to1000°C
ASTM D 3850
2270ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Power transformers Distribution transformers( Non Sealed& Sealed) Dry type Power transformers ControlTransformers
Induced over voltage withstand
IS 2026-1 2011 , IS 2026-22015, IS 2026-3 2014, IS2026-4 2011, IS 2026-5 2011,IEC 60076-1 2011, IEC 60076-22011, IEC 60076-3 2013, IEC60076-5 2006, IEC 60076-112004, IS 1180-1 2014, IS11171 2011, IS 12021 2005,IEEE std C57.12.90 2010, IEEEstd C57.12.202011, IEEE stdC57.12.00
2271ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Power transformers Distribution transformers( Non Sealed& Sealed) Dry type Power transformers ControlTransformers
Induced over voltage withstand
IS 2026-1 2011, IS 2026-22015, IS 2026-3 2014, IS2026-4 2011, IS 2026-5 2011,IEC 60076-1 2011, IEC 60076-22011, IEC 60076-3 2013, IEC60076-5 2006, IEC 60076-112004, IS 1180-1 2014, IS11171 2011, IS 12021 2005,IEEE std C57.12.90 2010, IEEEstd C57.12.20 2011, IEEE stdC57.12.00
2272ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Power transformers Distribution transformers( Non Sealed& Sealed) Dry type Power transformers ControlTransformers
Measurement of insulationresistance
IS 2026-1 2011, IS 2026-22015, IS 2026-3 2014, IS2026-4 2011, IS 2026 2011,IEC 60076-1 2011, IEC 60076-22011, IEC 60076-3 2013,IEC60076-5 2006,IEC 60076-112004, IS 1180-1 2014, IS11171 2011, IS 12021 2005,IEEE std C57.12.90 2010, IEEEstd C57.20 2011, IEEE stdC57.12.00
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 205 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2273ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Power transformers Distribution transformers( Non Sealed& Sealed) Dry type Power transformers ControlTransformers
Temperature rise test.
IS 2026-1 2011, IS 2026-22015, IS 2026-3 2014, IS2026-4 2011, IS 2026-5 2011,IEC 60076-1 2011, IEC 60076-22011, IEC 60076-3 2013, IEC60076-5 2006, IEC 60076-112004, IS 1180-1 2014, IS11171 2011, IS 1201 2005,IEEE std C57. 12.90 2010, IEEEstd c57.12.20 2011, IEEE stdC57.12.00
2274ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Solid Insulating Materials for Cable Insulation, Sheath,Armour Tensile Strength & Elongation
IEC 60840-2011, IEC60811-505-2012, IS 7098pt-1:1988 (RA-2015), IS 7098pt-2:2011 (RA- 2016), IEC60502(part 2 ) 2014, IEC60502 (part 1) 2004 +Amd1:2009, IS 3975:1999 (RA-2014), IS 1554 pt-1:1988 (RA-2015), IS 1554- pt-2:1988(RA-2015), IS 10810-pt-37:1984 (RA-2016), IS10810 pt-7:1984 RA
2275ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Switchgear Equipment with Control unitControl electronic elementsurge withstand capability(SWC) test
IEC 62271-111 /2012 IEEEC37.60
2276ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Test on core material of Polymeric insulator/ Compositeinsulator (T&C, Long rod & B&S) Ratings From 1kV To400kV (Inclusive)
Sudden Load release test IEC 62217-2017, IEC 61109:
2277ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Test on core material of Polymeric insulator/ Compositeinsulator Disc/Pin/Post/ Insulating Materials. Rating 1kV to400kV (Inclusive)
Water Immersion testIEC 62217-2012 , IEC61462/2008, IEC 61109/2008,IEC 62231/2006, ANSI C29.13
2278ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Test on core material of Polymeric insulator/ Compositeinsulator Disc/Pin/Post/ Insulating Materials. Ratings From1kV To 400kV (Inclusive)
Mechanical failing load test IEC 62217-2017, IEC 61109/2008, IEC 60383-1
2279ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Test on core material of Polymeric insulator/ Compositeinsulator Disc/Pin/Post/ Insulating Materials. Ratings From1kV To 400kV (Inclusive)
Dye penetration Test IEC 62217 2017, IEC 61462
2280ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Test on core material of Polymeric insulator/ Compositeinsulator Disc/Pin/Post/ Insulating Materials. Ratings From1kV To 400kV (Inclusive)
Thermo mechanical testIEC 60383-1/ 1993, IEC 62231-02/2006-02, IEC 61109/2008,IEC 62217/2012, IEC61462/2007, ANSI C29.13
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 206 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2281ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Test on core material of Polymeric insulator/ Compositeinsulator Disc/Pin/Post/ Insulating Materials. Ratings From1kV To 400kV (Inclusive)
Thermo mechanical testIEC 60383-1/ 1993, IEC 62231-02/2006-02, IEC 61109/2008,IEC 62217/2012, IEC61462/2007, ANSI C29.13
2282ELECTRICAL- INSULATINGMATERIALS &INSULATORS
Test on core material of Polymeric insulator/ Compositeinsulator Disc/Pin/Post/ Insulating Materials. Ratings From1kV To 400kV (Inclusive)
Water diffusion test IEC 62217 2017, IEC 61462
2283ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
LED lamps and luminaries Insulation resistance CI.8.1, IS 16102
2284ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
DC or AC supplied electronic control gear for led modules Circuit Power Factor IS 16104 : 2012 (Cl. 9)/ IEC62384
2285ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
DC or AC supplied electronic control gear for led modules Endurance IS 16104 : 2012 (Cl. 13)/ IEC62384
2286ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
DC or AC supplied electronic control gear for led modules Impedance at AudioFrequencies
IS 16104 : 2012 (Cl. 11)/ IEC62384
2287ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
DC or AC supplied electronic control gear for led modules Impedance at AudioFrequencies
IS 16104 : 2012 (Cl. 11)/ IEC62384
2288ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
DC or AC supplied electronic control gear for led modules Operational Tests for AbnormalCondition
IS 16104 : 2012 (Cl. 12)/ IEC62384
2289ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
DC or AC supplied electronic control gear for led modules Operational Tests for AbnormalCondition
IS 16104 : 2012 (Cl. 12)/ IEC62384
2290ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
DC or AC supplied electronic control gear for led modules Operational Tests for AbnormalCondition
IS 16104 : 2012 (Cl. 12)/ IEC62384
2291ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
DC or AC supplied electronic control gear for led modules Operational Tests for AbnormalCondition
IS 16104 : 2012 (Cl. 12)/ IEC62384
2292ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
DC or AC supplied electronic control gear for led modules Output Voltage and Current IS 16104 : 2012 (Cl. 7)/ IEC62384
2293ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
DC or AC supplied electronic control gear for led modules Output Voltage and Current IS 16104 : 2012 (Cl. 7)/ IEC62384
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 207 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2294ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
DC or AC supplied electronic control gear for led modules Supply Current IS 16104 : 2012 (Cl. 10)/ IEC62384
2295ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
DC or AC supplied electronic control gear for led modules Total Circuit Power IS 16104 : 2012 (Cl. 8)/ IEC62384
2296ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
DC or AC supplied electronic control gear for led modules Verification of Marking IS 16104 : 2012 (Cl. 6)/IEC62384
2297ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Electrical Lighting and Similar Equipment Conducted Disturbance voltage, Upto 240V
Cl 4.3.1 of CISPR-15 ( IS 6873Part 5)
2298ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Electrical Lighting and Similar Equipment Radiated field DisturbanceUpto 88dB
Cl 4.5.2 of CISPR-15 ( IS 6873Part 5)
2299ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Electrical Lighting and Similar Equipment Radiated field Disturbance(CDN Method) Upto 88dB
Cl 4.5.3 of CISPR-15 ( IS 6873Part 5)
2300ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Ingress Protection tests for luminaries and lighting fittingequipment enclosures: Street Light Fitting Enclosures,Aviation Lights fitting Enclosures, Domestic and IndustrialLight Fitting Enclosures, Railway Light Enclosures, Corridor /Office Light Fitting Enclosures, Solar Light FittingEnclosures, etc
electrical tests, no load runtest , functional test,performance tests anddrawings, dimensionalverifications
is 10322 part 1
2301ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Ingress Protection tests for luminaries and lighting fittingequipment enclosures: Street Light Fitting Enclosures,Aviation Lights fitting Enclosures, Domestic and IndustrialLight Fitting Enclosures, Railway Light Enclosures, Corridor /Office Light Fitting Enclosures, Solar Light FittingEnclosures, etc
Insulation resistance &electrical strength
CL 14 ,CL 15 IS 10322 : PART 52013 RA
2302ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Ingress Protection tests for luminaries and lighting fittingequipment enclosures: Street Light Fitting Enclosures,Aviation Lights fitting Enclosures, Domestic and IndustrialLight Fitting Enclosures, Railway Light Enclosures, Corridor /Office Light Fitting Enclosures, Solar Light FittingEnclosures, etc
Insulation resistance &electrical strength
cl 21.15 IS 10322 PART 5 SEC 52013 RA
2303ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Ingress Protection tests for luminaries and lighting fittingequipment enclosures: Street Light Fitting Enclosures,Aviation Lights fitting Enclosures, Domestic and IndustrialLight Fitting Enclosures, Railway Light Enclosures, Corridor /Office Light Fitting Enclosures, Solar Light FittingEnclosures, etc
Insulation resistance andElectric strength IS 10322 : PART 1 Sec 10
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 208 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2304ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Ingress Protection tests for luminaries and lighting fittingequipment enclosures: Street Light Fitting Enclosures,Aviation Lights fitting Enclosures, Domestic and IndustrialLight Fitting Enclosures, Railway Light Enclosures, Corridor /Office Light Fitting Enclosures, Solar Light FittingEnclosures, etc
Insulation resistance Test,Electric strength test
cl 10.2.2 IEC:60598-1. 2014amd
2305ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Ingress Protection tests for luminaries and lighting fittingequipment enclosures: Street Light Fitting Enclosures,Aviation Lights fitting Enclosures, Domestic and IndustrialLight Fitting Enclosures, Railway Light Enclosures, Corridor /Office Light Fitting Enclosures, Solar Light FittingEnclosures, etc
RESISTANCE TO DUST, SOLIDOBJECTS AND MOISTURE
cl 21.14 sec 60598-1 2014amd
2306ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Ingress Protection tests for luminaries and lighting fittingequipment enclosures: Street Light Fitting Enclosures,Aviation Lights fitting Enclosures, Domestic and IndustrialLight Fitting Enclosures, Railway Light Enclosures, Corridor /Office Light Fitting Enclosures, Solar Light FittingEnclosures, etc
RESISTANCE TO DUST, SOLIDOBJECTS AND MOISTURE
CL10.2.1 IEC:60598-1 2014amd
2307ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Ingress Protection tests for luminaries and lighting fittingequipment enclosures: Street Light Fitting Enclosures,Aviation Lights fitting Enclosures, Domestic and IndustrialLight Fitting Enclosures, Railway Light Enclosures, Corridor /Office Light Fitting Enclosures, Solar Light FittingEnclosures, etc
RESISTANCE TO DUST, SOLIDOBJECTS AND MOISTURE, SEC 9 IS 10322 : PART 1
2308ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamp Control Gears (d.c. or a.c. Supplied Electronic Controlgear for LED Modules)
Creepage Distances andClearances
IS 15885 (Part 2/Sec13):2012+A1:2015 / IEC61347-2-13 (Cl. 17)
2309ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamp Control Gears (d.c. or a.c. Supplied Electronic Controlgear for LED Modules) Electric Strength
IS 15885 (Part 2/Sec13):2012+A1:2015 / IEC61347-2-13,Cl. 12
2310ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamp Control Gears (d.c. or a.c. Supplied Electronic Controlgear for LED Modules) Electric Strength
IS 15885 (Part 2/Sec13):2012+A1:2015 / IEC61347-2-13,Cl. 12
2311ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamp Control Gears (d.c. or a.c. Supplied Electronic Controlgear for LED Modules) Electric Strength
IS 15885 (Part 2/Sec13):2012+A1:2015 / IEC61347-2-13,Cl. 12
2312ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamp Control Gears (d.c. or a.c. Supplied Electronic Controlgear for LED Modules) Fault Condition
IS 15885 (Part 2/Sec13):2012+A1:2015 / IEC61347-2-13, Cl. 14
2313ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamp Control Gears (d.c. or a.c. Supplied Electronic Controlgear for LED Modules)
Moisture Resistance andInsulation
IS 15885 (Part 2/Sec13):2012+A1:2015 / IEC61347-2-13,(Cl. 11)
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 209 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2314ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamp Control Gears (d.c. or a.c. Supplied Electronic Controlgear for LED Modules)
Moisture Resistance andInsulation
IS 15885 (Part 2/Sec13):2012+A1:2015 / IEC61347-2-13,(Cl. 11)
2315ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamp Control Gears (d.c. or a.c. Supplied Electronic Controlgear for LED Modules)
Moisture Resistance andInsulation
IS 15885 (Part 2/Sec13):2012+A1:2015 / IEC61347-2-13,(Cl. 11)
2316ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamp Control Gears (d.c. or a.c. Supplied Electronic Controlgear for LED Modules)
Moisture Resistance andInsulation
IS 15885 (Part 2/Sec13):2012+A1:2015 / IEC61347-2-13,(Cl. 11)
2317ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamp Control Gears (d.c. or a.c. Supplied Electronic Controlgear for LED Modules)
Protection against AccidentalContact Against Live Parts
IS 15885 (Part 2/Sec13):2012+A1:2015 / IEC61347-2-13 (Cl. 8)
2318ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamp Control Gears (d.c. or a.c. Supplied Electronic Controlgear for LED Modules)
Provision for ProtectiveEarthing
IS 15885 (Part 2/Sec13):2012+A1:2015 / IEC61347-2-13 (Cl. 10)
2319ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamp Control Gears (d.c. or a.c. Supplied Electronic Controlgear for LED Modules) Resistance to Corrosion
IS 15885 (Part 2/Sec13):2012+A1:2015 / IEC61347-2-13,Cl. 20
2320ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamp Control Gears (d.c. or a.c. Supplied Electronic Controlgear for LED Modules)
Resistance to Heat, Fire andTracking
IS 15885 (Part 2/Sec13):2012+A1:2015 / IEC61347-2-13 (Cl. 19)
2321ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamp Control Gears (d.c. or a.c. Supplied Electronic Controlgear for LED Modules)
Resistance to Heat, Fire andTracking
IS 15885 (Part 2/Sec13):2012+A1:2015 / IEC61347-2-13 (Cl. 19)
2322ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamp Control Gears (d.c. or a.c. Supplied Electronic Controlgear for LED Modules)
Resistance to Heat, Fire andTracking
IS 15885 (Part 2/Sec13):2012+A1:2015 / IEC61347-2-13 (Cl. 19)
2323ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamp Control Gears (d.c. or a.c. Supplied Electronic Controlgear for LED Modules)
Resistance to Heat, Fire andTracking
IS 15885 (Part 2/Sec13):2012+A1:2015 / IEC61347-2-13 (Cl. 19)
2324ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamp Control Gears (d.c. or a.c. Supplied Electronic Controlgear for LED Modules)
Resistance to Heat, Fire andTracking
IS 15885 (Part 2/Sec13):2012+A1:2015 / IEC61347-2-13 (Cl. 19)
2325ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamp Control Gears (d.c. or a.c. Supplied Electronic Controlgear for LED Modules)
Resistance to Heat, Fire andTracking
IS 15885 (Part 2/Sec13):2012+A1:2015 / IEC61347-2-13 (Cl. 19)
2326ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamp Control Gears (d.c. or a.c. Supplied Electronic Controlgear for LED Modules)
Resistance to Heat, Fire andTracking
IS 15885 (Part 2/Sec13):2012+A1:2015 / IEC61347-2-13 (Cl. 19)
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 210 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2327ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamp Control Gears (d.c. or a.c. Supplied Electronic Controlgear for LED Modules)
Resistance to Heat, Fire andTracking
IS 15885 (Part 2/Sec13):2012+A1:2015 / IEC61347-2-13 (Cl. 19)
2328ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamp Control Gears (d.c. or a.c. Supplied Electronic Controlgear for LED Modules)
Screws, current carrying partsand connections
IS 15885 (Part 2/Sec13):2012+A1:2015 / IEC61347-2-13,Cl. 18
2329ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamp Control Gears (d.c. or a.c. Supplied Electronic Controlgear for LED Modules) Terminals
IS 15885 (Part 2/Sec13):2012+A1:2015 / IEC61347-2-13 (Cl.9)
2330ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamp Control Gears (d.c. or a.c. Supplied Electronic Controlgear for LED Modules)
Thermal Test for Windings ofBallast
IS 15885 (Part 2/Sec 13):2012+A1:2015 / IEC61347-2-13,Cl. 13
2331ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamp Control Gears (d.c. or a.c. Supplied Electronic Controlgear for LED Modules) Transformer Heating
IS 15885 (Part 2/Sec 13):2012+A1:2015 / IEC61347-2-13,Cl. 15
2332ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamp Control Gears (d.c. or a.c. Supplied Electronic Controlgear for LED Modules) Verification of Construction
IS 15885 (Part 2/Sec13):2012+A1:2015 / IEC61347-2-13 (Cl. 16)
2333ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamp Control Gears (d.c. or a.c. Supplied Electronic Controlgear for LED Modules) Verification of Marking
IS 15885 (Part 2/Sec 13):2012+A1:2015 / IEC61347-2-13 (Cl. 7)
2334ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps for General Lighting Services Cap temperature riseIS 15111 (Part 1):2002+ A1:2003 +A2:2007+A3 :2008+A4:2010 +A5 :2014 (Cl.11) /IEC 60968, Ed 3.0 (Cl.11)
2335ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps for General Lighting Services Cap temperature riseIS 15111 (Part 1):2002+ A1:2003 +A2:2007+A3 :2008+A4:2010 +A5 :2014 (Cl.11) /IEC 60968, Ed 3.0(Cl.11)
2336ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps for General Lighting Services Fault conditionsIS 15111 (Part 1):2002+ A1:2003 +A2:2007 +A3:2008+A4:2010 +A5:2014 (Cl.14) /IEC 60968, Ed 3.0 (Cl.14)
2337ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps for General Lighting ServicesInsulation treatment AndElectric Strength AfterHumidity treatment
IS 15111 (Part 1):2002+ A1:2003 +A2:2007 +A3:2008+A4:2010 +A5:2014 (Cl.9)/ IEC60968, Ed 3.0 (Cl.9)
2338ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps for General Lighting ServicesInsulation treatment AndElectric Strength AfterHumidity treatment
IS 15111 (Part 1):2002+ A1:2003 +A2:2007 +A3:2008+A4:2010 +A5:2014 (Cl.9)/ IEC60968, Ed 3.0 (Cl.9)
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 211 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2339ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps for General Lighting ServicesInsulation treatment AndElectric Strength AfterHumidity treatment
IS 15111 (Part 1):2002+ A1:2003 +A2:2007 +A3:2008+A4:2010 +A5:2014 (Cl.9)/ IEC60968, Ed 3.0 (Cl.9)
2340ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps for General Lighting ServicesInsulation treatment AndElectric Strength AfterHumidity treatment
IS 15111 (Part 1):2002+ A1:2003 +A2:2007 +A3:2008+A4:2010 +A5:2014 (Cl.9)/ IEC60968, Ed 3.0 (Cl.9)
2341ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps for General Lighting Services InterchangeabilityIS 15111 (Part 1):2002+ A1:2003 +A2:2007 +A3:2008+A4:2010 +A5:2014 (Cl.7)/IEC60968, Ed 3.0 (Cl.7)
2342ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps for General Lighting Services Mechanical StrengthIS 15111 (Part 1):2002+A1:2003+A2:2007+A3 :2008+A4:2010 +A5:2014 (Cl.10)/IEC 60968, Ed 3.0 (Cl.10)
2343ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps for General Lighting Services Protection against Accidentalcontact with live parts
IS 15111 (Part 1):2002+ A1:2003 +A2:2007 +A3:2008+A4:2010 +A5:2014 (Cl.8)/IEC60968, Ed 3.0 (2015) (Cl.8)
2344ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps for General Lighting Services Resistance to flame andignition
IS 15111 (Part 1):2002+ A1:2003 +A2:2007 +A3:2008+A4:2010 +A5:2014 (Cl.13) /IEC 60968, Ed 3.0 (Cl.13)
2345ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps for General Lighting Services Resistance to flame andignition
IS 15111 (Part 1):2002+ A1:2003 +A2:2007 +A3:2008+A4:2010 +A5:2014 (Cl.13) /IEC 60968, Ed 3.0 (Cl.13)
2346ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps for General Lighting Services Resistance to flame andignition
IS 15111 (Part 1):2002+ A1:2003 +A2:2007 +A3:2008+A4:2010 +A5:2014 (Cl.13) /IEC 60968, Ed 3.0 (Cl.13
2347ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps for General Lighting Services Resistance to flame andignition
IS 15111 (Part 1):2002+ A1:2003 +A2:2007 +A3:2008+A4:2010 +A5:2014 (Cl.13) /IEC 60968, Ed 3.0 (Cl.13)
2348ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps for General Lighting Services Resistance to flame andignition
IS 15111 (Part 1):2002+ A1:2003 +A2:2007 +A3:2008+A4:2010 +A5:2014 (Cl.13) /IEC 60968, Ed 3.0 (Cl.13)
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 212 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2349ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps for General Lighting Services Resistance to flame andignition
IS 15111 (Part 1):2002+ A1:2003 +A2:2007 +A3:2008+A4:2010 +A5:2014 (Cl.13) /IEC 60968, Ed 3.0(Cl.13
2350ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps for General Lighting Services Resistance to HeatIS 15111 (Part 1):2002+ A1:2003 +A2:2007 +A3:2008+A4:2010 +A5:2014 (Cl.12) /IEC 60968, Ed 3.0 , Cl.12
2351ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps for General Lighting Services Resistance to HeatIS 15111 (Part 1):2002+ A1:2003 +A2:2007 +A3:2008+A4:2010 +A5:2014 (Cl.12) /IEC 60968, Ed 3.0 , Cl.12
2352ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps for General Lighting Services Resistance to HeatIS 15111 (Part 1):2002+ A1:2003 +A2:2007 +A3:2008+A4:2010 +A5:2014 (Cl.12) /IEC 60968, Ed 3.0 , Cl.12
2353ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps for General Lighting Services Resistance to HeatIS 15111 (Part 1):2002+ A1:2003 +A2:2007 +A3:2008+A4:2010 +A5:2014 (Cl.12) /IEC 60968, Ed 3.0 , Cl.12
2354ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps for General Lighting Services Verification of MarkingIS 15111 (Part 1):2002+ A1:2003 +A2:2007 +A3:2008+A4:2010, A5:2014(Cl.6)/IEC60968, Ed 3.0 (Cl.6)
2355ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps, Luminaries And Accessories (Fixed General PurposeLuminaries, Luminaires For Road And Street Lighting, FloodLights
Moisture Resistance/HumidityTest/Resistance to dust andMoisture/Moisture resistance &insulation/Insulation resistanceand Electric strength afterHumidity treatment
IS 10322 (Part 1) (Cl. 9.3) IS10322 (Part 5/Sec I) :2012(Cl.14) IS 10322 (Part 5/Sec 3):2012 (Cl.14) IS 10322(Part5/Sec 5) :2013 (Cl. 14
2356ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps, Luminaries And Accessories (Fixed General PurposeLuminaries, Luminaires For Road And Street Lighting, FloodLights
Moisture Resistance/HumidityTest/Resistance to dust andMoisture/Moisture resistance &insulation/Insulation resistanceand Electric strength afterHumidity treatment
IS 10322 (Part 1) (Cl. 9.3) IS10322 (Part 5/Sec I) :2012(Cl.14) IS 10322 (Part 5/Sec 3):2012 (Cl.14) IS 10322(Part5/Sec 5) :2013 (Cl. 14)
2357ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps, Luminaries And Accessories (Fixed General PurposeLuminaries, Luminaires For Road And Street Lighting, FloodLights)
Ball Pressure Test (ClauseNo.13)/ Resistance to heat, fireand tracking/resistance to heat
IS 10322 (Part 1) (Cl. 13.2) IS10322 (Part 5/Sec I) :2012 (Cl.16) IS 10322 (Part 5/Sec3:2012) (Cl.16) IS 10322(Part5/Sec 5) :2013 (Cl. 16)
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 213 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2358ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps, Luminaries And Accessories (Fixed General PurposeLuminaries, Luminaires For Road And Street Lighting, FloodLights)
Ball Pressure Test (ClauseNo.13)/ Resistance to heat, fireand tracking/resistance to heat
IS 10322 (Part 1) (Cl. 13.2) IS10322 (Part 5/Sec I) :2012 (Cl.16) IS 10322 (Part 5/Sec3:2012) (Cl.16) IS 10322(Part5/Sec 5) :2013 (Cl. 16)
2359ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps, Luminaries And Accessories (Fixed General PurposeLuminaries, Luminaires For Road And Street Lighting, FloodLights)
Ball Pressure Test (ClauseNo.13)/ Resistance to heat, fireand tracking/resistance to heat
IS 10322 (Part 1) (Cl. 13.2) IS10322 (Part 5/Sec I) :2012 (Cl.16) IS 10322 (Part 5/Sec3:2012) (Cl.16) IS 10322(Part5/Sec 5) :2013 (Cl. 16)
2360ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps, Luminaries And Accessories (Fixed General PurposeLuminaries, Luminaires For Road And Street Lighting, FloodLights)
Ball Pressure Test (ClauseNo.13)/ Resistance to heat, fireand tracking/resistance to heat
IS 10322 (Part 1) (Cl. 13.2) IS10322 (Part 5/Sec I) :2012 (Cl.16) IS 10322 (Part 5/Sec3:2012) (Cl.16) IS 10322(Part5/Sec 5) :2013 (Cl. 16)
2361ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps, Luminaries And Accessories (Fixed General PurposeLuminaries, Luminaires For Road And Street Lighting, FloodLights)
Creepage Distances andClearances Test
IS 10322 (Part 1) (Cl. 11) IS10322 (Part 5/Sec I) :2012 (Cl.8) IS 10322 (Part 5/Sec 3):2012 (Cl.8) IS 10322(Part5/Sec 5) :2013 (Cl. 8)
2362ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps, Luminaries And Accessories (Fixed General PurposeLuminaries, Luminaires For Road And Street Lighting, FloodLights)
Insulation Resistance Test/Insulation resistance andelectric strength/Moistureresistance andInsulation/Insulation resistanceand electric strength afterHumidity treatment
IS 10322 (Part 1) (Cl. 10) IS10322 (Part 5/Sec I) :2012(Cl.15) IS 10322 (Part 5/Sec 3):2012 (Cl.15) IS 10322(Part5/Sec 5) :2013 (Cl. 15)
2363ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps, Luminaries And Accessories (Fixed General PurposeLuminaries, Luminaires For Road And Street Lighting, FloodLights)
Insulation Resistance Test/Insulation resistance andelectric strength/Moistureresistance andInsulation/Insulation resistanceand electric strength afterHumidity treatment
IS 10322 (Part 1) :2014 (Cl. 10)IS 10322 (Part 5/Sec I) :2012(Cl.15) IS 10322 (Part 5/Sec 3):2012 (Cl.15) IS 10322(Part5/Sec 5) :2013 (Cl. 15)
2364ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps, Luminaries And Accessories (Fixed General PurposeLuminaries, Luminaires For Road And Street Lighting, FloodLights)
Insulation Resistance Test/Insulation resistance andelectric strength/Moistureresistance andInsulation/Insulation resistanceand electric strength afterHumidity treatment ElectricStrength Test/ Insulationresistance and electricstrength/ Electric strength
IS 10322 (Part 1) (Cl. 10) IS10322 (Part 5/Sec I) :2012 (Cl.15) IS 10322 (Part 5/Sec 3):2012 (Cl.15) IS 10322(Part5/Sec 5) :2013 (Cl. 15)
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 214 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2365ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps, Luminaries And Accessories (Fixed General PurposeLuminaries, Luminaires For Road And Street Lighting, FloodLights)
Insulation Resistance Test/Insulation resistance andelectric strength/Moistureresistance andInsulation/Insulation resistanceand electric strength afterHumidity treatment ElectricStrength Test/ Insulationresistance and electricstrength/ Electric strength
IS 10322 (Part 1) (Cl. 10) IS10322 (Part 5/Sec I) :2012(Cl.15) IS 10322 (Part 5/Sec 3):2012 (Cl.15) IS 10322(Part5/Sec 5) :2013 (Cl. 15)
2366ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps, Luminaries And Accessories (Fixed General PurposeLuminaries, Luminaires For Road And Street Lighting, FloodLights)
Insulation Resistance Test/Insulation resistance andelectric strength/Moistureresistance andInsulation/Insulation resistanceand electric strength afterHumidity treatment ElectricStrength Test/ Insulationresistance and electricstrength/ Electric strength
IS 10322 (Part 1) (Cl. 10) IS10322 (Part 5/Sec I) :2012 (Cl.15) IS 10322 (Part 5/Sec 3):2012 (Cl.15) IS 10322(Part5/Sec 5) :2013 (Cl. 15)
2367ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps, Luminaries And Accessories (Fixed General PurposeLuminaries, Luminaires For Road And Street Lighting, FloodLights)
Marking IS 10322 (Part 1) (Cl. 3)
2368ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps, Luminaries And Accessories (Fixed General PurposeLuminaries, Luminaires For Road And Street Lighting, FloodLights)
MarkingIS 10322 (Part 1) (Cl. 3) IS10322(Part 5/Sec I) (Cl.6)IS10322(Part 5/Sec 3) (Cl.6)IS10322(Part 5/Sec 5) (Cl.6
2369ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps, Luminaries And Accessories (Fixed General PurposeLuminaries, Luminaires For Road And Street Lighting, FloodLights)
Marking
IS 10322 (Part 1):2014 (Cl. 3)IS 10322(Part 5/Sec I) :2012(Cl.6) IS10322(Part 5/Sec3):2012 (Cl.6) IS10322(Part5/Sec 5) :2013 (Cl.6
2370ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps, Luminaries And Accessories (Fixed General PurposeLuminaries, Luminaires For Road And Street Lighting, FloodLights)
Moisture Resistance/HumidityTest/Resistance to dust andMoisture/Moisture resistance &insulation/Insulation resistanceand Electric strength afterHumidity treatment
IS 10322 (Part 1) (Cl. 9.3) IS10322 (Part 5/Sec I) :2012(Cl.14) IS 10322 (Part 5/Sec 3):2012 (Cl.14) IS 10322(Part5/Sec 5) :2013 (Cl. 14)
2371ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps, Luminaries And Accessories (Fixed General PurposeLuminaries, Luminaires For Road And Street Lighting, FloodLights)
Moisture Resistance/HumidityTest/Resistance to dust andMoisture/Moisture resistance &insulation/Insulation resistanceand Electric strength afterHumidity treatment
IS 10322 (Part 1) : (Cl. 9.3) IS10322 (Part 5/Sec I) :2012(Cl.14) IS 10322 (Part 5/Sec 3):2012 (Cl.14) IS 10322(Part5/Sec 5) :2013 (Cl. 14)
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 215 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2372ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps, Luminaries And Accessories (Fixed General PurposeLuminaries, Luminaires For Road And Street Lighting, FloodLights)
Moisture Resistance/HumidityTest/Resistance to dust andMoisture/Moisture resistance &insulation/Insulation resistanceand Electric strength afterHumidity treatment
IS 10322 (Part 1) :2014 (Cl.9.3) IS 10322 (Part 5/Sec I):2012 (Cl.14) IS 10322 (Part5/Sec 3) :2012 (Cl.14) IS10322(Part 5/Sec 5) :2013 (Cl.14)
2373ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps, Luminaries And Accessories (Fixed General PurposeLuminaries, Luminaires For Road And Street Lighting, FloodLights)
Protection against AccidentalContact with liveparts/Protections againstelectric shock
IS 10322 (Part 1) : (Cl. 8)
2374ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps, Luminaries And Accessories (Fixed General PurposeLuminaries, Luminaires For Road And Street Lighting, FloodLights)
Protection against AccidentalContact with liveparts/Protections againstelectric shock
IS 10322 (Part 1) : (Cl. 8)IS10322(Part 5/Sec I) (Cl. 12)IS10322 (Part 5/Sec 3) (Cl.12)IS10322(Part 5/Sec 5) (Cl.12),
2375ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps, Luminaries And Accessories (Fixed General PurposeLuminaries, Luminaires For Road And Street Lighting, FloodLights)
Protection against AccidentalContact with liveparts/Protections againstelectric shock
IS 10322 (Part 1) :2014 (Cl. 8)IS10322(Part 5/Sec I) :2012 (Cl.12) IS10322 (Part 5/Sec 3):2012 (Cl.12) IS10322(Part5/Sec 5) :2013 (Cl.12)
2376ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps, Luminaries And Accessories (Fixed General PurposeLuminaries, Luminaires For Road And Street Lighting, FloodLights)
Provision for ProtectiveEarthing/ Provision for Earthing
IS 10322 (Part 1) :2014 (Cl. 7)IS 10322 (Part 5/Sec I) :2012(Cl. 9) IS10322(Part 5/Sec 3):2012 (Cl.9) IS10322(Part 5/Sec5) :2013 (Cl.9)
2377ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps, Luminaries And Accessories (Fixed General PurposeLuminaries, Luminaires For Road And Street Lighting, FloodLights)
Provision for ProtectiveEarthing/ Provision for Earthing
IS 10322 (Part 1) :2014 (Cl. 7)IS 10322 (Part 5/Sec I) :2012(Cl. 9) IS10322(Part 5/Sec 3):2012 (Cl.9) IS10322(Part 5/Sec5) :2013 (Cl.9)
2378ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Lamps, Luminaries And Accessories (Fixed General PurposeLuminaries, Luminaires For Road And Street Lighting, FloodLights)
Thermal and Endurance Test/Endurance test and thermaltest/ Thermal endurance testfor windings of ballasts
IS 10322 (Part 1) (Cl. 12) IS10322 (Part 5/Sec I) :2012(Cl.13 ) IS 10322 (Part 5/Sec 3):2012 (Cl.13) IS 10322(Part5/Sec 5):2013 (Cl. 13)
2379ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
LED lamps and luminaries Bending moment, bending testand pull test IS 16102 part 1 Cl. 6.2
2380ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
LED lamps and luminaries Protection against accidentalcontact with line parts CI.7, IS 16102- Part 1,2012
2381ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
LED lamps and luminaries Color rendering index (CRI) CI.9, IESNA LM 79- 08 and CI.14 of IS 16106
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 216 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2382ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
LED lamps and luminaries Luminous flux IS 16102-2 Cl.9.1
2383ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
LED lamps and luminaries Centre beam intensity Beamangle IS 16102-2 Cl.9.2
2384ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
LED lamps and luminaries Luminous flux IS 16106-2012 C1.9,IESNA LM79- 08 and CI.·10.2 of IS 16106
2385ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
LED lamps and luminaries Color temperature (CCT) CI.9, IESNA LM 79- 08 and CI.11 of IS 16106
2386ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
LED lamps and luminaries Luminous intensity distribution CI.12, IS 16106-2012 andCI.9.3, I~SNA LM 79-08
2387ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
LED lamps and luminaries Cap temperature CI.10, IS 16102- Part 1
2388ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
LED lamps and luminaries Electrical strength C1.8.2, IS 16102- 1
2389ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
LED Lamps and luminaries Harmonics
IS 15111 (Part 2):2002+A1:2003+A2:2003+A3:2003+A4:2004+A5:2005+A6:2008+A7:2009+A8:2012/ (Cl. 14) /IEC 60969
2390ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
LED lamps and luminaries Resistance to flame andignition C1.12, IS 16102- Part 1
2391ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
LED lamps and luminaries Resistance to heat C1.12, IS 16102- Part 1
2392ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
LED lamps and luminaries Torsional resistance of unusedlamps CI.9, IS 16102- 1,2012
2393ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
LED Luminaire - Performance RequirementsChromaticity Co-ordinates,Correlated Colour Temperatureand Colour Rendering Index
IS 16107 (Part 2/Sec 1): 2012(Cl 9) / IEC 62722-2-1 (Cl 9)
2394ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
LED Luminaire - Performance Requirements EnduranceIS 16107 (Part 2/Sec 1): 2012(Cl.10.3) IEC 62722-2-1(Cl.10.3)
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 217 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2395ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
LED Luminaire - Performance Requirements Lumen MaintenanceIS 16107 (Part 2/Sec 1): 2012(Cl 10.2)/ IEC 62722-2-1(Cl.10.2) / IS 16105
2396ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
LED Luminaire - Performance Requirements Luminaire Efficacy IS 16107 (Part 2/Sec 1):2012(Cl 8.3) / IEC 62722-2-1
2397ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
LED Luminaire - Performance Requirements Luminous Flux IS 16107 (Part 2/Sec 1):2012,Cl.8.1,IEC 62722-2-1
2398ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
LED Luminaire - Performance RequirementsLuminous IntensityDistribution, Peak Intensity andBeam Angle
IS 16107 (Part 2/Sec 1):2012(Cl.8.2) / IEC 62722-2-1
2399ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
LED Luminaire - Performance RequirementsLuminous IntensityDistribution, Peak Intensity andBeam Angle
IS 16107 (Part 2/Sec 1):2012(Cl.8.2) / IEC 62722-2-1
2400ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
LED Luminaire - Performance Requirements Total Input Power IS 16107 (Part 2/Sec 1): 2012(Cl.7) / IEC 62722-2-1
2401ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
LED Luminaire - Performance Requirements Total Input Power IS 16107 (Part 2/Sec 1): 2012(Cl.7) / IEC 62722-2-1
2402ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
LED Luminaire - Performance Requirements Total Input Power IS 16107 (Part 2/Sec 1): 2012(Cl.7) / IEC 62722-2-1
2403ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
LED Luminaire - Performance Requirements Total Input Power IS 16107 (Part 2/Sec 1): 2012(Cl.7) / IEC 62722-2-1
2404ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
LED Luminaire - Performance Requirements Total Input Power IS 16107 (Part 2/Sec 1): 2012(Cl.7) / IEC 62722-2-1
2405ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
LED Luminaire - Performance Requirements Total Input Power IS 16107 (Part 2/Sec 1): 2012(Cl.7) / IEC 62722-2-1
2406ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
LED Luminaire - Performance Requirements Verification of Marking IS 16107 (Part 2/Sec 1): 2012(Cl.4) / IEC 62722-2-1
2407ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Limitation of voltage changes, voltage fluctuations andflicker in public low-voltage supply system, for equipmentwith rated current = 16 A per phase and not subjected toconditional connection
Assessment of voltagechanges, voltage fluctuationsand flicker, product : ElectricalLighting and, powerconditioners
Cl 4 of IEC 61000-3-3:2013/ IS14700-3-3 :
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 218 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2408ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Limitation of voltage changes, voltage fluctuations andflicker in public low-voltage supply system, for equipmentwith rated current = 16 A per phase and not subjected toconditional connection
Assessment of voltagechanges, voltage fluctuationsand flicker Product : ElectricalLighting and Similar Equipment
Cl 4 of IEC 61000-3-3:2013/ IS14700-3-3 :
2409ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Limits for harmonic current emissions (equipment inputcurrent =16 A per phase)
Control methods Product :Electrical Lighting and SimilarEquipment
Cl 6.1 of IEC 61000-3-2 : 2014/IS 14700-3-2 :
2410ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Limits for harmonic current emissions (equipment inputcurrent =16 A per phase)
Harmonic currentMeasurement Product :Electrical Lighting and SimilarEquipment
Cl 6.2 of IEC 61000-3-2 : 2014/IS 14700-3-2 :
2411ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Limits for harmonic current emissions (equipment inputcurrent =16 A per phase)
Harmonic currentMeasurement Product :Electrical Lighting and SimilarEquipment
Cl 6.2 of IEC 61000-3-2 : 2014/IS 14700-3-2 :
2412ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
MarkingLamps, Luminaries And Accessories (Fixed GeneralPurpose Luminaries, Luminaires For Road And StreetLighting, Flood Lights)
Marking IS 10322 (Part 1) (Cl. 3)
2413ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
PHOTOBIOLOGICAL SAFETY OF LAMPS AND LAMP SYSTEMS Actinic UV hazard exposurelimit for the skin and eye
Cl 4.3.1 of IEC 2471 : 2006/ IS16108: 2012, RA
2414ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
PHOTOBIOLOGICAL SAFETY OF LAMPS AND LAMP SYSTEMS Exposure limits LampClassification
Cl 4 and Cl 6 of IEC 62471 :2006/ IS 16108: 2012, RA
2415ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
PHOTOBIOLOGICAL SAFETY OF LAMPS AND LAMP SYSTEMS Near-UV hazard exposure limitfor the eye
Cl 4.3.2 of IEC 62471 : 2006/ IS16108: 2012, RA
2416ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
PHOTOBIOLOGICAL SAFETY OF LAMPS AND LAMP SYSTEMS Infrared radiation hazardexposure limits for the eye
Cl 4.3.7 of IEC 62471 : 2006/ IS16108: 2012, RA
2417ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
PHOTOBIOLOGICAL SAFETY OF LAMPS AND LAMP SYSTEMS Retinal blue light hazardexposure limit
Cl 4.3.3 of IEC 62471 : 2006/ IS16108:2012, RA
2418ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
PHOTOBIOLOGICAL SAFETY OF LAMPS AND LAMP SYSTEMS Retinal blue light hazardexposure limit - small source
Cl 4.3.4 of IEC 62471 : 2006/ IS16108:2012, RA
2419ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
PHOTOBIOLOGICAL SAFETY OF LAMPS AND LAMP SYSTEMSRetinal thermal hazardexposure limit weak visualstimulus
Cl 4.3.6 IEC 62471 : 2006/ IS16108:2012, RA
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 219 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2420ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
PHOTOBIOLOGICAL SAFETY OF LAMPS AND LAMP SYSTEMS Retinal thermal hazardexposure limit
Cl 4.3.5 of IEC 62471 : 2006/ IS16108:2012
2421ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
PHOTOBIOLOGICAL SAFETY OF LAMPS AND LAMP SYSTEMS Thermal hazard exposure limitfor the skin
Cl 4.3.8 of IEC 62471 : 2006/ IS16108:2012
2422ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Safety of Lamp Control Gear Construction IS 15885 (Part 1):2011 (Cl.15)/IEC 61347-1
2423ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Safety of Lamp Control Gear Creepage Distances andClearances
IS 15885 (Part 1&2):2011+A1:2015 (Cl. 16 and 17)/ IEC61347-1
2424ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Safety of Lamp Control Gear Electric Strength IS 15885 (Part 1):2011+A1:2015 (Cl.12)/IEC 61347-1
2425ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Safety of Lamp Control Gear Electric Strength IS 15885 (Part 1):2011+A1:2015 (Cl.12)/IEC 61347-1
2426ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Safety of Lamp Control Gear Fault Condition IS 15885 (Part 1 & 2):2011+A1:2015 (Cl.14)/IEC 61347-1
2427ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Safety of Lamp Control Gear Moisture Resistance andInsulation
IS 15885 (Part 1 & 2):2011+A1:2015 (Cl.11)/ IEC 61347-1
2428ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Safety of Lamp Control Gear Moisture Resistance andInsulation
IS 15885 (Part 1& 2):2011+A1:2015 (Cl.11)/ IEC 61347-1
2429ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Safety of Lamp Control Gear Moisture Resistance andInsulation
IS 15885 (Part 1&2):2011+A1:2015 (Cl.11)/ IEC 61347-1
2430ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Safety of Lamp Control Gear Moisture Resistance andInsulation
IS 15885 (Part 1&2):2011+A1:2015 (Cl.11)/ IEC 61347-1
2431ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Safety of Lamp Control Gear Protection against AccidentalContact Against Live Parts
IS 15885 (Part 1):2011+A1:2015 (Cl.10)/ IEC 61347-1,IS 15882-2 Cl.8
2432ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Safety of Lamp Control Gear Provision for ProtectiveEarthing
IS 15885 (Part 1):2011+A1:2015 (Cl. 9)/ IEC 61347-1,IS 15885-2 Cl.10
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 220 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2433ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Safety of Lamp Control Gear Resistance to CorrosionIS 15885 (Part 1):2011+A1:2015 (Cl. 19)/ IEC61347-1, IS 15885-2 Cl.20
2434ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Safety of Lamp Control Gear Resistance to Heat, Fire andTracking
IS 15885 (Part 1):2011+A1:2015 (Cl. 18)/ IEC 61347-1
2435ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Safety of Lamp Control Gear Resistance to Heat, Fire andTracking
IS 15885 (Part 1):2011+A1:2015 (Cl. 18)/ IEC 61347-1
2436ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Safety of Lamp Control Gear Resistance to Heat, Fire andTracking
IS 15885 (Part 1):2011+A1:2015 (Cl. 18)/ IEC 61347-1
2437ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Safety of Lamp Control Gear Resistance to Heat, Fire andTracking
IS 15885 (Part 1):2011+A1:2015 (Cl. 18)/ IEC 61347-1
2438ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Safety of Lamp Control Gear Resistance to Heat, Fire andTracking
IS 15885 (Part 1):2011+A1:2015 (Cl. 18)/ IEC61347-1, IS 15885-2 Cl.19
2439ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Safety of Lamp Control Gear Resistance to Heat, Fire andTracking
IS 15885 (Part 1):2011+A1:2015 (Cl. 18)/ IEC61347-1, IS 15885-2 Cl.19
2440ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Safety of Lamp Control Gear Resistance to Heat, Fire andTracking
IS 15885 (Part 1):2011+A1:2015 (Cl. 18)/ IEC61347-1, IS 15885-2 Cl.19
2441ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Safety of Lamp Control Gear Screws, current carrying partsand connections
IS 15885 (Part1):2011+A1:2015 (Cl. 17)/ IEC61347-1 & IS 15885-2 Cl.18
2442ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Safety of Lamp Control Gear TerminalsIS 15885 (Part 1):2011+A1:2015 (Cl.8)/ IEC 61347-1 &IS 15885-2 Cl.9
2443ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Safety of Lamp Control Gear Thermal Test for Windings ofBallast
IS 15885 (Part 1):2011+A1:2015 (Cl.13)/ IEC 61347-1
2444ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Safety of Lamp Control Gear Verification of Marking IS 15885 (Part 1):2011+A1:2015 (Cl.7)/ IEC 61347-1
2445ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LED Lamps for General lighting Services Creepage Distance andClearances IS 16102 (Part 1), Clause. 14
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 221 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2446ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LED Lamps for General lighting Services Fault Condition IS 16102 (Part 1), Clause. 13
2447ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LED Lamps for General lighting Services Verification of marking IS 16102 (Part 1), Clause. 5
2448ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self ballasted LED Marking IS16012-2 Cl.5
2449ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
SELF BALLASTED LED LAMPS DIMENSIONS IS 16102-2, Cl.6
2450ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
SELF BALLASTED LED LAMPS Emission of RF disturbance is 16102-2 cl 8.4
2451ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
SELF BALLASTED LED LAMPS HARMONICS IS 16102 -2 CL. 8.3
2452ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
SELF BALLASTED LED LAMPS POWER FACTOR IS 16102-2, Cl.8.2
2453ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LEDLamps for General Lighting Services Cap temperature riseIS 16102 (Part 1):2012+A1:2015+A2:2015 (Cl.10)/IEC62560
2454ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LEDLamps for General Lighting Services Color Rendering Index (CRI) IS 16102 (Part 2):2017 Cl.10.2IEC 62612 Cl. 10.2
2455ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LEDLamps for General Lighting Services Color Variation categories IS 16102 (Part 2):2017 Cl.10.1IEC 62612 ,Cl. 10.1
2456ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LEDLamps for General Lighting Services Creepage distances ClearancesIS 16102 (Part 1):2012+A1:2015+A2:2015 (Cl.14) / IEC62560
2457ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LEDLamps for General Lighting Services Efficacy IS 16102 (Part 2):2017 Cl.9.3IEC 62612 Cl. 9.3
2458ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LEDLamps for General Lighting Services Endurance IS 16102 (Part 2):2017 Cl 11.3IEC 62612 ,Cl. 11.3
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 222 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2459ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LEDLamps for General Lighting Services Endurance IS 16102 (Part 2):2017 Cl 11.3IEC 62612 ,Cl. 11.3
2460ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LEDLamps for General Lighting Services Endurance IS 16102 (Part 2):2017 Cl 11.3IEC 62612 Cl. 11.3
2461ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LEDLamps for General Lighting Services Fault conditionsIS 16102 (Part 1):2012+A1:2015+A2:2015 (Cl.13) IEC62560
2462ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LEDLamps for General Lighting Services Fault conditionsIS 16102 (Part 1):2012+A1:2015+A2:2015 (Cl.13) IEC62560
2463ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LEDLamps for General Lighting Services Fault conditionsIS 16102 (Part 1):2012+A1:2015+A2:2015 (Cl.13) IEC62560
2464ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LEDLamps for General Lighting Services Fault conditionsIS 16102 (Part 1):2012+A1:2015+A2:2015 (Cl.13) IEC62560
2465ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LEDLamps for General Lighting Services Fault conditionsIS 16102 (Part 1):2012+A1:2015+A2:2015 (Cl.13) IEC62560
2466ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LEDLamps for General Lighting Services Fault conditionsIS 16102 (Part 1):2012+A1:2015+A2:2015 (Cl.13) IEC62560
2467ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LEDLamps for General Lighting Services Fault conditionsIS 16102 (Part 1):2012+A1:2015+A2:2015 (Cl.13) IEC62560
2468ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LEDLamps for General Lighting Services Fault conditionsIS 16102 (Part 1):2012+A1:2015+A2:2015 (Cl.13) IEC62560
2469ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LEDLamps for General Lighting Services Fault conditionsIS 16102 (Part 1):2012+A1:2015+A2:2015 (Cl.13) IEC62560
2470ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LEDLamps for General Lighting Services Fault conditionsIS 16102 (Part 1):2012+A1:2015+A2:2015 (Cl.13) IEC62560
2471ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LEDLamps for General Lighting Services Fault conditionsIS 16102 (Part 1):2012+A1:2015+A2:2015 (Cl.13) IEC62560
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 223 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2472ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LEDLamps for General Lighting Services Fault conditionsIS 16102 (Part 1):2012+A1:2015+A2:2015 (Cl.13) IEC62560
2473ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LEDLamps for General Lighting Services Fault conditionsIS 16102 (Part 1):2012+A1:2015+A2:2015 (Cl.13) IEC62560
2474ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LEDLamps for General Lighting Services Fault conditionsIS 16102 (Part 1):2012+A1:2015+A2:2015 (Cl.13) IEC62560
2475ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LEDLamps for General Lighting Services Fault conditionsIS 16102 (Part 1):2012+A1:2015+A2:2015 (Cl.13) IEC62560
2476ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LEDLamps for General Lighting Services Fault conditionsIS 16102 (Part 1):2012+A1:2015+A2:2015 (Cl.13) IEC62560
2477ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LEDLamps for General Lighting Services Fault conditionsIS 16102 (Part 1):2012+A1:2015+A2:2015 (Cl.13) IEC62560
2478ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LEDLamps for General Lighting Services Fault conditionsIS 16102 (Part 1):2012+A1:2015+A2:2015 (Cl.13) IEC62560
2479ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LEDLamps for General Lighting Services Fault conditionsIS 16102 (Part 1):2012+A1:2015+A2:2015 (Cl.13) IEC62560
2480ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LEDLamps for General Lighting ServicesInsulation treatment AndElectric Strength AfterHumidity treatment
IS 16102 (Part 1):2012+A1:2015+A2:2015 (Cl.8) / IEC62560 (Cl.8)
2481ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LEDLamps for General Lighting ServicesInsulation treatment AndElectric Strength AfterHumidity treatment
IS 16102 (Part 1):2012+A1:2015+A2:2015 (Cl.8) / IEC62560 (Cl.8)
2482ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LEDLamps for General Lighting ServicesInsulation treatment AndElectric Strength AfterHumidity treatment
IS 16102 (Part 1):2012+A1:2015+A2:2015 (Cl.8) / IEC62560 (Cl.8)
2483ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LEDLamps for General Lighting ServicesInsulation treatment AndElectric Strength AfterHumidity treatment
IS 16102 (Part 1):2012+A1:2015+A2:2015 (Cl.8) / IEC62560 (Cl.8)
2484ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LEDLamps for General Lighting ServicesInsulation treatment AndElectric Strength AfterHumidity treatment
IS 16102 (Part 1):2012+A1:2015+A2:2015 (Cl.8) / IEC62560 : (Cl.8)
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 224 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2485ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LEDLamps for General Lighting Services Lumen Maintenance IS 16102 (Part 2):2017 Cl .11.2IEC 62612 ,Cl. 11.2
2486ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LEDLamps for General Lighting Services MarkingIS 16102 (Part 1):2012+A1:2015+A2:2015 (Cl.5)/IEC62560 cl.5
2487ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LEDLamps for General Lighting Services Mechanical strengthIS 16102 (Part 1):2012+A1:2015+A2:2015 (Cl.9)/IEC62560
2488ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LEDLamps for General Lighting Services Resistance to flame andignition
IS 16102 (Part 1):2012+A1:2015+A2:2015 (Cl.12)/IEC62560
2489ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LEDLamps for General Lighting Services Resistance to flame andignition
IS 16102 (Part 1):2012+A1:2015+A2:2015 (Cl.12)/IEC62560
2490ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LEDLamps for General Lighting Services Resistance to flame andignition
IS 16102 (Part 1):2012+A1:2015+A2:2015 (Cl.12)/IEC62560
2491ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LEDLamps for General Lighting Services Resistance to HeatIS 16102 (Part 1):2012+A1:2015+A2:2015 (Cl.11) /IEC62560
2492ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self Ballasted LEDLamps for General Lighting Services Resistance to HeatIS 16102 (Part 1):2012+A1:2015+A2:2015 (Cl.11) /IEC62560
2493ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
SELF BLLASTED LED LAMP POWER IS 16102-2, Cl.8.1
2494ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-Ballasted Lamps for General lighting Services Color
IS 15111 (Part 2):2002+A1:2003+A2:2003+A3:2003+A4:2004+A5:2005+A6:2008+A7:2009+A8:2012/ (Cl.11) /IEC 6096
2495ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-Ballasted Lamps for General lighting Services Color Coordinate
IS 15111 (Part 2):2002+A1:2003+A2:2003+A3:2003+A4:2004+A5:2005+A6:2008+A7:2009+A8:2012/ (Cl. 11) /IEC 60969
2496ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-Ballasted Lamps for General lighting Services Dimension
IS 15111 (Part 2):2002+A1:2003+A2:2003+A3:2003+ A4:2004+A5:2005+A6:2008+A7:2009+A8:2012/(Cl.6)/IEC 60969
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 225 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2497ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-Ballasted Lamps for General lighting Services Lamp Efficacy
IS 15111 (Part 2):2002+A1:2003+A2:2003+A3:2003+A4:2004+A5:2005+A6:2008+A7:2009+A8:2012/ (Cl. 15) /IEC 60969
2498ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-Ballasted Lamps for General lighting Services Lamp Wattage
IS 15111 (Part 2):2002+A1:2003+A2:2003+A3:2003+A4:2004+A5:2005+A6:2008+A7:2009+A8:2012/ (Cl. 9) /IEC 60969
2499ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-Ballasted Lamps for General lighting Services Lamp Wattage
IS 15111 (Part 2):2002+A1:2003+A2:2003+A3:2003+A4:2004+A5:2005+A6:2008+A7:2009+A8:2012/ (Cl. 9) /IEC 60969
2500ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-Ballasted Lamps for General lighting Services Lamp Wattage
IS 15111 (Part 2):2002+A1:2003+A2:2003+A3:2003+A4:2004+A5:2005+A6:2008+A7:2009+A8:2012/ (Cl. 9) /IEC 60969
2501ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-Ballasted Lamps for General lighting Services Lamp Wattage
IS 15111 (Part 2):2002+A1:2003+A2:2003+A3:2003+A4:2004+A5:2005+A6:2008+A7:2009+A8:2012/ (Cl. 9) /IEC 60969
2502ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-Ballasted Lamps for General lighting Services Lamp Wattage
IS 15111 (Part 2):2002+A1:2003+A2:2003+A3:2003+A4:2004+A5:2005+A6:2008+A7:2009+A8:2012/ (Cl. 9) /IEC 60969
2503ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-Ballasted Lamps for General lighting Services Life
IS 15111 (Part 2):2002+A1:2003+A2:2003+A3:2003+A4:2004+A5:2005+A6:2008+A7:2009+A8:2012/ (Cl.13) /IEC 60969
2504ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-Ballasted Lamps for General lighting Services Lumen Maintenance
IS 15111 (Part 2):2002+A1:2003+A2:2003+A3:2003+A4:2004+A5:2005+A6:2008+A7:2009+A8:2012/ (Cl.12) /IEC 60969
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 226 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2505ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-Ballasted Lamps for General lighting Services Luminous Flux
IS 15111 (Part 2):2002+A1:2003+A2:2003+A3:2003+A4:2004+A5:2005+A6:2008+A7:2009+A8:2012/ Cl. 10) /IEC 60969
2506ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-Ballasted Lamps for General lighting Services Power Factor
IS 15111 (Part 2):2002+A1:2003+A2:2003+A3:2003+A4:2004+A5:2005+A6:2008+A7:2009+A8:2012/ (Cl. 16) /IEC 60969
2507ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-Ballasted Lamps for General lighting Services Power Factor
IS 15111 (Part 2):2002+A1:2003+A2:2003+A3:2003+A4:2004+A5:2005+A6:2008+A7:2009+A8:2012/ (Cl. 16) /IEC 60969
2508ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-Ballasted Lamps for General lighting Services Starting and Run Up
IS 15111 (Part 2):2002+A1:2003+A2:2003+A3:2003+A4:2004+A5:2005+A6:2008+A7:2009+A8:2012/ (Cl.8)/IEC60969
2509ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-ballasted LED Modules for General lightingChromaticity Coordinates,Correlated Colour Temperatureand CRI Index
IS 16103(Part 2): 2012,Cl.9 IEC62717, Cl.9
2510ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-ballasted LED Modules for General lighting Dimensions IS 16103 (Part 2):2012,Cl.5 IEC62717, Cl.5
2511ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-ballasted LED Modules for General lighting Endurance IS 16103 (Part 2):2012 Cl.10.3IEC 62717, Cl.10.3
2512ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-ballasted LED Modules for General lightingest for Emission (Radiated andConducted) of Radio FrequencyDisturbances
IS 16103 (Part 2): 2012 Cl 13IEC 62717,Cl 13
2513ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-ballasted LED Modules for General lighting Information for LuminaireDesign
IS 16103 (Part 2):2012 Cl. 12IEC 62717,Cl. 12
2514ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-ballasted LED Modules for General lighting Lumen Maintenance IS 16103 (Part 2):2012,Cl 10.2IEC 62717 IS 16105
2515ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-ballasted LED Modules for General lighting Luminous Flux IS 16103(Part 2): 2012, Cl.8.1IEC 62717, Cl.8.1
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 227 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2516ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-ballasted LED Modules for General lightingLuminous IntensityDistribution, Peak Intensity andBeam Angle
IS 16103(Part 2): 2012, Cl.8.2IEC 62717, Cl.8.2
2517ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-ballasted LED Modules for General lighting Module Power IS 16103(Part 2): 2012,Cl.7 IEC62717, Cl.7
2518ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-ballasted LED Modules for General lighting Module Power IS 16103(Part 2): 2012,Cl.7 IEC62717, Cl.7
2519ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-ballasted LED Modules for General lighting Module Power IS 16103(Part 2): 2012,Cl.7 IEC62717, Cl.7
2520ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-ballasted LED Modules for General lighting Verification of Marking IS 16103 (Part 2):2012,Cl.4 IEC62717, Cl.4
2521ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-ballasted LED Modules for General Lighting Services Creepage Distances andClearances
IS 16103 (Part 1):2012+A1:2014 (Cl.16)/IEC 62031
2522ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-ballasted LED Modules for General Lighting Services Electric StrengthIS 16103 (Part 1):2012+A1:2014 (Cl 12) / IEC62031
2523ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-ballasted LED Modules for General Lighting Services Electric StrengthIS 16103 (Part 1):2012+A1:2014 (Cl 12) / IEC62031
2524ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-ballasted LED Modules for General Lighting Services Fault Condition IS 16103 (Part 1):2012+A1:2014 (Cl.13) / IEC 62031
2525ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-ballasted LED Modules for General Lighting Services Heat Management IS 16103 (Part 1):2012+A1:2014 (Cl.21)/IEC 62031
2526ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-ballasted LED Modules for General Lighting Services Moisture Resistance andInsulation
IS 16103 (Part 1):2012+A1:2014 (Cl.11) /IEC 62031
2527ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-ballasted LED Modules for General Lighting Services Moisture Resistance andInsulation
IS 16103 (Part 1):2012+A1:2014 (Cl.11) /IEC 62031
2528ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-ballasted LED Modules for General Lighting Services Moisture Resistance andInsulation
IS 16103 (Part 1):2012+A1:2014 (Cl.11) /IEC 62031
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 228 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2529ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-ballasted LED Modules for General Lighting Services Moisture Resistance andInsulation
IS 16103 (Part 1):2012+A1:2014 (Cl.11) /IEC 62031
2530ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-ballasted LED Modules for General Lighting Services Protection against AccidentalContact Against Live Parts
IS 16103 (Part 1):2012+A1:2014 (Cl.10)/IEC 62031
2531ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-ballasted LED Modules for General Lighting Services Provision for ProtectiveEarthing
IS 16103 (Part1):2012+A1:2014 (Cl.9) / IEC62031
2532ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-ballasted LED Modules for General Lighting Services Resistance to Corrosion IS 16103 (Part 1):2012 +A1 :2014 (Cl.19)/IEC 62031
2533ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-ballasted LED Modules for General Lighting Services Resistance to Heat, Fire andTracking
IS 16103 (Part 1): 2012+A1:2014 (Cl.18) / IEC 62031
2534ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-ballasted LED Modules for General Lighting Services Resistance to Heat, Fire andTracking
IS 16103 (Part 1): 2012+A1:2014 (Cl.18) / IEC 62031
2535ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-ballasted LED Modules for General Lighting Services Resistance to Heat, Fire andTracking
IS 16103 (Part 1): 2012+A1:2014 (Cl.18) / IEC 62031
2536ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-ballasted LED Modules for General Lighting Services Resistance to Heat, Fire andTracking
IS 16103 (Part 1): 2012+A1:2014 (Cl.18) / IEC 62031
2537ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-ballasted LED Modules for General Lighting Services Resistance to Heat, Fire andTracking
IS 16103 (Part 1): 2012+A1:2014 (Cl.18) / IEC 62031
2538ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-ballasted LED Modules for General Lighting Services Resistance to Heat, Fire andTracking
IS 16103 (Part 1): 2012+A1:2014 (Cl.18) / IEC 62031
2539ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-ballasted LED Modules for General Lighting Services Resistance to Heat, Fire andTracking
IS 16103 (Part 1): 2012+A1:2014 (Cl.18) / IEC 62031
2540ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-ballasted LED Modules for General Lighting Services Resistance to Heat, Fire andTracking
IS 16103 (Part 1): 2012+A1:2014 (Cl.18) / IEC 62031
2541ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-ballasted LED Modules for General Lighting Services Screws, current carrying partsand connections
IS 16103 (Part 1):2012+A1:2014 (Cl.17)/IEC 62031
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 229 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2542ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-ballasted LED Modules for General Lighting Services Terminals IS 16103 (Part 1):2012(Cl.8)/IEC 62031
2543ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Self-ballasted LED Modules for General Lighting Services Verification of Marking IS 16103 (Part 1):2012+A1:2014 (Cl.7) /IEC 62031
2544ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Surge immunity test Product : Electrical Lighting andSimilar Equipment
Test Instrumentation TestCondition
Cl 6 of IEC61000-4-5:2014+AMD1:2017/IS 14700-4-5:
2545ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Surge immunity test Product : Electrical Lighting andSimilar Equipment Test setup - test condition
Cl 7 of IEC61000-4-5:2014+AMD1:2017/IS 14700-4-5:
2546ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Surge immunity test Product : Electrical Lighting andSimilar Equipment Test setup - test condition
Cl 7 of IEC61000-4-5:2014+AMD1:2017 /IS 14700-4-5:
2547ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
Surge immunity test - Product : Electrical Lighting andSimilar Equipment
Test Instrumentation - Testcondition
Cl 6 of IEC61000-4-5:2014+AMD1:2017 /IS 14700-4-5:
2548ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
TFL . Dimensions IS 2418-Part 1
2549ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
TFL .Life test IS 2418-Part 3
2550ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
TFL 1.Visual examination IS 2418-Part 1, . IS 2418-Part 2,IS 2418-Part 3 & 4
2551ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
TFL Burning test IS 2418-Part 1
2552ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
TFL Insulation resistance test IS 2418-Part 1
2553ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
TFL Lumen measurement IS 2418-Part 1
2554ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
TFL Starting characteristic IS 2418-Part 1,
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 230 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2555ELECTRICAL- LAMPS,LUMINARIES &ACCESSORIES
TFL Torsion test IS 2418-Part 1, IS 2418-Part 3
2556 ELECTRICAL-MISCELLANEOUS
Photovoltaic pumping systems - Design qualification andperformance measurements
H-Q characterisation ,Measurement of Head Cl 5.3.3 of IEC 62253 :
2557 ELECTRICAL-MISCELLANEOUS
Photovoltaic pumping systems - Design qualification andperformance measurements
Start-up power measurements, Design qualification for apumping system
Cl 5.3.4 , CL 6 of IEC 62253 :
2558 ELECTRICAL-MISCELLANEOUS
Photovoltaic pumping systems - Design qualification andperformance measurements
System characteristics ,Dimensioning of hydraulicequipment , Documentation
Cl 6.3, Cl 6.4, Cl 6.5 of IEC62253 :
2559 ELECTRICAL-MISCELLANEOUS
Photovoltaic pumping systems - Design qualification andperformance measurements H-Q characteristics , Voltage Cl 5.3.3 of IEC 62253 :
2560 ELECTRICAL-MISCELLANEOUS
Photovoltaic pumping systems - Design qualification andperformance measurements H-Q characteristics, Current Cl 5.3.3 of IEC 62253 :
2561 ELECTRICAL-MISCELLANEOUS
Photovoltaic pumping systems - Design qualification andperformance measurements H-Q characteristics, Flow Cl 5.3.3 of IEC 62253 :
2562 ELECTRICAL-MISCELLANEOUS
Photovoltaic pumping systems - Design qualification andperformance measurements H-Q characteristics, Power Cl 5.3.3 of IEC 62253 :
2563 ELECTRICAL-MISCELLANEOUS
Photovoltaic pumping systems - Design qualification andperformance measurements
H-Q characteristics, Powerfactor Cl 5.3.3 of IEC 62253 :
2564 ELECTRICAL-MISCELLANEOUS
Photovoltaic pumping systems - Design qualification andperformance measurements H-Q characteristics, Speed Cl 5.3.3 of IEC 62253 :
2565 ELECTRICAL-MISCELLANEOUS
Photovoltaic pumping systems - Design qualification andperformance measurements
P Q Characterisation -Efficiency Cl 5.3.3 of IEC 62253 :
2566 ELECTRICAL-MISCELLANEOUS
Photovoltaic pumping systems - Design qualification andperformance measurements
P-Q Characteristic ,Measurement of Flow Cl 5.3.2 of IEC 62253 :
2567 ELECTRICAL-MISCELLANEOUS
Photovoltaic pumping systems - Design qualification andperformance measurements P-Q Charecteristics Cl 5.3.2 of IEC 62253 :
2568 ELECTRICAL-MISCELLANEOUS
Photovoltaic pumping systems - Design qualification andperformance measurements P-Q Charecteristics Cl 5.3.2 of IEC 62253 :
2569 ELECTRICAL-MISCELLANEOUS Solar Photovoltaic (PV) Module Ignitability test MST 24 Cl 10.18 of IS/IEC 61730-2 :
2570 ELECTRICAL-MISCELLANEOUS Solar Photovoltaic (PV) Module Peel test MST 35 Cl 10.24 of IS/IEC 61730-2
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 231 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2571 ELECTRICAL-MISCELLANEOUS Solar Photovoltaic Module
General, Bypass diodefunctionality test, Initialmeasurements, Cleaning andrecovery,Finalmeasurements,Requirements
Cl 4.1, Cl 4.2, Cl 6, Cl 8, CL 9and Cl 10 of IEC 61701
2572 ELECTRICAL-MISCELLANEOUS Solar Photovoltaic Module
General, PV modules of class 0,PV modules of class II, PVmodules of class III, Intendeduse, Marking anddocumentation , Electricalcomponents and insulation ,Mechanical andelectromechanical connections, Materials, Protection againstelectric shock,
Cl 4, Cl 4.1,Cl 4.2, Cl 4.3, Cl4.4, Cl 4.5, Cl 5, Cl 5.1, CL 5.2,Cl 5.3, Cl 5.4, Cl 5.5,Cl 5.6 ofIEC 61730-1
2573 ELECTRICAL-MISCELLANEOUS Solar Photovoltaic Module Pre-stress tests Cl 4.2 of IEC TS 62804-1
2574 ELECTRICAL-MISCELLANEOUS Solar Photovoltaic Module Pre-stress tests Cl 4.2 of IEC TS 62804-1
2575 ELECTRICAL-MISCELLANEOUS Solar Photovoltaic Module Pre-stress tests Cl.4.2 of IEC TS 62804-1
2576 ELECTRICAL-MISCELLANEOUS Solar Photovoltaic Module Salt mist corrosion test, Cl 7 of IEC 61701
2577 ELECTRICAL-MISCELLANEOUS Solar Photovoltaic Module Salt mist corrosion test, Cl 7 of IEC 61701
2578 ELECTRICAL-MISCELLANEOUS Solar Photovoltaic Module Salt mist corrosion test, Cl 7 of IEC 61701
2579 ELECTRICAL-MISCELLANEOUS Solar Photovoltaic Module Voltage stress test procedures Cl.4.3 and 4.4 of IEC TS
62804-1
2580 ELECTRICAL-MISCELLANEOUS Solar Photovoltaic Module Voltage stress test procedures Cl.4.3 and 4.4 of IEC TS
62804-1
2581 ELECTRICAL-MISCELLANEOUS Solar Photovoltaic Module Voltage stress test procedures Cl.4.3 and 4.4 of IEC TS
62804-1
2582 ELECTRICAL-MISCELLANEOUS Solar Photovoltaic Module Voltage stress test procedures Cl.4.3 and 4.4 of IEC TS
62804-1
2583 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Power Condition unit Safety of power converters for use inphotovoltaic power systems Part 1: General Requirements Chemical hazard IS 16221-1:2016 / IEC 62109-1
Cl.12
2584 ELECTRICAL- POWERSUPPLIES & STABILIZERS
"SOLID STATE INVERTERS RUN FROM STORAGE BATTERIES-SPECIFICATION" Climatic Tests Cl 7.10. of IS 13314:
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 232 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2585 ELECTRICAL- POWERSUPPLIES & STABILIZERS
"SOLID STATE INVERTERS RUN FROM STORAGE BATTERIES-SPECIFICATION" Harmonic Content Cl 7.11 of IS 13314:
2586 ELECTRICAL- POWERSUPPLIES & STABILIZERS
"SOLID STATE INVERTERS RUN FROM STORAGE BATTERIES-SPECIFICATION" No load Test - Voltage Cl 7.8 of IS 13314:
2587 ELECTRICAL- POWERSUPPLIES & STABILIZERS
"SOLID STATE INVERTERS RUN FROM STORAGE BATTERIES-SPECIFICATION" Output Test - Efficiency Cl 7.9 of IS 13314:
2588 ELECTRICAL- POWERSUPPLIES & STABILIZERS
"SOLID STATE INVERTERS RUN FROM STORAGE BATTERIES-SPECIFICATION" Output Test - frequency Cl 7.9 of IS 13314:
2589 ELECTRICAL- POWERSUPPLIES & STABILIZERS Grid tied and off grid Inverters and UPS Islanding protection Cl 5.3 of IEC 61727:
2590 ELECTRICAL- POWERSUPPLIES & STABILIZERS Grid tied and off grid Inverters and UPS DC Injection Cl 4.4 of IEC 61727:
2591 ELECTRICAL- POWERSUPPLIES & STABILIZERS Grid tied and off grid Inverters and UPS Earthing Cl 5.5 of IEC 61727:
2592 ELECTRICAL- POWERSUPPLIES & STABILIZERS Grid tied and off grid Inverters and UPS Flicker Cl 4.3 of IEC 61727:
2593 ELECTRICAL- POWERSUPPLIES & STABILIZERS Grid tied and off grid Inverters and UPS Harmonics and waveform
distortion Cl 4.6 of IEC 61727:
2594 ELECTRICAL- POWERSUPPLIES & STABILIZERS Grid tied and off grid Inverters and UPS Isolation and switching Cl 5.7 of IEC 61727:
2595 ELECTRICAL- POWERSUPPLIES & STABILIZERS Grid tied and off grid Inverters and UPS Loss of utility voltage Cl 5.1 of IEC 61727:
2596 ELECTRICAL- POWERSUPPLIES & STABILIZERS Grid tied and off grid Inverters and UPS Normal frequency operating
range Cl 4.5 of IEC 61727:
2597 ELECTRICAL- POWERSUPPLIES & STABILIZERS Grid tied and off grid Inverters and UPS Normal voltage operating
range Cl 4.2 of IEC 61727:
2598 ELECTRICAL- POWERSUPPLIES & STABILIZERS Grid tied and off grid Inverters and UPS Over or under frequency Cl 5.2.2 of IEC 61727:
2599 ELECTRICAL- POWERSUPPLIES & STABILIZERS Grid tied and off grid Inverters and UPS Over or under voltage Cl 5.2.1 of IEC 61727:
2600 ELECTRICAL- POWERSUPPLIES & STABILIZERS Grid tied and off grid Inverters and UPS Power factor Cl 4.7 of IEC 61727:
2601 ELECTRICAL- POWERSUPPLIES & STABILIZERS Grid tied and off grid Inverters and UPS Response to utility recovery Cl 5.4 of IEC 61727:
2602 ELECTRICAL- POWERSUPPLIES & STABILIZERS Grid tied and off grid Inverters and UPS Short circuit protection Cl 5.6 of IEC 61727:
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 233 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2603 ELECTRICAL- POWERSUPPLIES & STABILIZERS Grid tied Inverters Frequency ride through
Cl 4. (c) Subclause (2) CentralElectricity Authority (TechnicalStandards for Connectivity tothe Grid) (Amendment)Regulations,
2604 ELECTRICAL- POWERSUPPLIES & STABILIZERS Grid Tied Inverters Harmonics
Cl 5 Subclause (3) CentralElectricity Authority (TechnicalStandards for Connectivity tothe Grid) (Amendment)Regulations,
2605 ELECTRICAL- POWERSUPPLIES & STABILIZERS Grid tied Inverters High voltage ride through
Cl 4. (c) Subclause (7) CentralElectricity Authority (TechnicalStandards for Connectivity tothe Grid) (Amendment)Regulations,
2606 ELECTRICAL- POWERSUPPLIES & STABILIZERS Grid tied inverters Low voltage ride through test
Cl 4. (c) Subclause (3) CentralElectricity Authority (TechnicalStandards for Connectivity tothe Grid) (Amendment)Regulations,
2607 ELECTRICAL- POWERSUPPLIES & STABILIZERS Grid-tied I Off-grid inverters and UPS Anti-Islanding Test CI. 6, IEC 62116: 2008/ IS
16169
2608 ELECTRICAL- POWERSUPPLIES & STABILIZERS Grid-tied I Off-grid inverters and UPS Efficiency test CI. 4.6,5.1,5.2,5.3,7.1,IS/ IEC
61683: 1999 RA 2015
2609 ELECTRICAL- POWERSUPPLIES & STABILIZERS Grid-tied I Off-grid inverters and UPS Disconnect time 1m sec to 100
seconds IS 16169:2014/ IEC 62116
2610 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Power Condition unit Safety of power converters for use inphotovoltaic power systems Part 1: General Requirements
Components, Software andfirmware performing safetyfunctions
IS 16221-1:2016 / IEC 62109-1Cl 14 & 15
2611 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Power Condition unit Safety of power converters for use inphotovoltaic power systems Part 1: General Requirements
Measurement of clearancesand creep age distances
IS 16221-1:2016 / IEC 62109-1Annex A
2612 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Power Condition unit Safety of power converters for use inphotovoltaic power systems Part 1: General Requirements
Physical requirements & Droptest
IS 16221-1:2016 / IEC 62109-1Cl. 13& 13.7.4
2613 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Power Condition unit Safety of power converters for use inphotovoltaic power systems Part 1: General Requirements Programmable equipment IS 16221-1:2016 / IEC 62109-1
Annex B
2614 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Power Condition unit Safety of power converters for use inphotovoltaic power systems Part 1: General Requirements
Protection against electricshock and energy hazards,
IS 16221-1:2016 / IEC 62109-1Cl. 7, 7.2, 7.3, 7.4, 7.5
2615 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Power Condition unit Safety of power converters for use inphotovoltaic power systems Part 1: General Requirements
Protection against electricshock and energy hazards,
IS 16221-1:2016 / IEC 62109-1Cl. 7, 7.2, 7.3, 7.4, 7.5
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 234 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2616 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Power Condition unit Safety of power converters for use inphotovoltaic power systems Part 1: General Requirements
Protection against electricshock and energy hazards,
IS 16221-1:2016 / IEC 62109-1Cl. 7, 7.2, 7.3, 7.4, 7.5
2617 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Power Condition unit Safety of power converters for use inphotovoltaic power systems Part 1: General Requirements
Protection against electricshock and energy hazards,
IS 16221-1:2016 / IEC 62109-1Cl. 7, 7.2, 7.3, 7.4, 7.5
2618 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Power Condition unit Safety of power converters for use inphotovoltaic power systems Part 1: General Requirements
Protection against fire hazardShort circuit and over currentprotection Physical check.
IS 16221-1:2016 / IEC 62109-1Cl. 9,9.1,9.2, 9.3
2619 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Power Condition unit Safety of power converters for use inphotovoltaic power systems Part 1: General Requirements
Symbols to be used inequipment markings
IS 16221-1:2016 / IEC 62109-1Annex C
2620 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Power Condition unit Safety of power converters for use inphotovoltaic power systems Part 1: General Requirements
Ultraviolet light conditioningtest
IS 16221-1:2016 / IEC 62109-1Annex J
2621 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Power Condition unit Safety of power converters for use inphotovoltaic power systems Part 1: General Requirements
Environmental requirementsand conditions
IS 16221-1:2016 / IEC 62109-1Cl. 6
2622 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Power Condition unit Safety of power converters for use inphotovoltaic power systems Part 1: General Requirements
General conditions for testing,reference test conditions andenvironmental conditions
IS 16221-1:2016 / IEC 62109-1Cl.4.2 and 4.2.2, 4.2.2.1 a,b,c,d
2623 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Power Condition unit Safety of power converters for use inphotovoltaic power systems Part 1: General Requirements
General conditions for testing,reference test conditions andenvironmental conditions
IS 16221-1:2016 / IEC62109-1Cl.4.2 and 4.2.2,4.2.2.1 a,b,c,d
2624 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Power Condition unit Safety of power converters for use inphotovoltaic power systems Part 1: General Requirements Ingress protection IS 16221-1:2016 / IEC 62109-1
Cl 6.3
2625 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Power Condition unit Safety of power converters for use inphotovoltaic power systems Part 1: General Requirements
Physical requirements & Droptest
IS 16221-1:2016 / IEC 62109-1Cl. 13&13.7.4
2626 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Power Condition unit Safety of power converters for use inphotovoltaic power systems Part 1: General Requirements
Physical verification Markingand documentation
IS 16221-1:2016 / IEC 62109-1Cl. 5
2627 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Power Condition unit Safety of power converters for use inphotovoltaic power systems Part 1: General Requirements Pollution degree IS 16221-1:2016 / IEC 62109-1
Cl 6.2
2628 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Power Condition unit Safety of power converters for use inphotovoltaic power systems Part 1: General Requirements
Protection against liquidhazard
IS 16221-1:2016 / IEC 62109-1Cl.11
2629 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Power Condition unit Safety of power converters for use inphotovoltaic power systems Part 1: General Requirements
Protection against mechanicalhazards
IS 16221-1:2016 / IEC 62109-1Cl. 8
2630 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Power Condition unit Safety of power converters for use inphotovoltaic power systems Part 1: General Requirements
Safety of power converters foruse in photovoltaic powersystems Part 1: GeneralRequirements
IS 16221-1:2016 / IEC 62109-1Cl.4.2 and 4.2.2, 4.2.2.1 a,b,c,d
2631 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Power Condition unit Safety of power converters for use inphotovoltaic power systems Part 1: General Requirements
Temperature andHumidity(Room conditioning)
IS 16221-1:2016 / IEC 62109-1Cl 6.5
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 235 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2632 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Power Condition unit Safety of power converters for use inphotovoltaic power systems Part 1: General Requirements
Testing in single faultcondition, Back feed voltageprotection, Electrical ratingstests
IS 16221-1:2016 / IEC 62109-1Cl. 4.4, 4.6 and 4.7
2633 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Power Condition unit Safety of power converters for use inphotovoltaic power systems Part 1: General Requirements
Testing in single faultcondition, Back feed voltageprotection, Electrical ratingstests
IS 16221-1:2016 / IEC 62109-1Cl. 4.4, 4.6 and 4.7
2634 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Power Condition unit Safety of power converters for use inphotovoltaic power systems Part 1: General Requirements
Testing in single faultcondition, Back feed voltageprotection, Electrical ratingstests
IS 16221-1:2016 / IEC 62109-1Cl. 4.4, 4.6 and 4.7
2635 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Power Condition unit Safety of power converters for use inphotovoltaic power systems Part 1: General Requirements
Testing in single faultcondition, Back feed voltageprotection, Electrical ratingstests
IS 16221-1:2016 / IEC 62109-1Cl. 4.4, 4.6 and 4.7
2636 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Power Condition unit Safety of power converters for use inphotovoltaic power systems Part 1: General Requirements
Testing in single faultcondition, Back feed voltageprotection, Electrical ratingstests
IS 16221-1:2016 / IEC 62109-1:Cl. 4.4, 4.6 and 4.7
2637 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Power Condition unit Safety of power converters for use inphotovoltaic power systems Part 1: General Requirements
GENERAL CONDITIONS FORTESTING, REFERENCE TESTCONDITIONS ANDENVIRONMENTAL CONDITIONS
IS 16221-1:2016 / IEC 62109-1Cl.4.2 and 4.2.2, 4.2.2.1 a,b,c,d
2638 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Power Condition unit Safety of power converters for use inphotovoltaic power systems Part 1: General Requirements
Protection against sonicpressure and sound level(makeTES 1352A sound level meter)
IS 16221-1:2016 / IEC 62109-1
2639 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Power Condition unit Safety of power converters for use inphotovoltaic power systems Part 1: General Requirements
Environmental requirementsand conditions
IS 16221-1:2016 / IEC 62109-1Cl. 6:
2640 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Power Conditioning unit Safety of power converters for usein photovoltaic power systems Part 1: GeneralRequirements
General conditions for testing,reference test conditions andenvironmental conditions
IS 16221-1:2016 / IEC 62109-1Cl.4.2 and 4.2.2, 4.2.2.1 a,b,c,d
2641 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Safety of power converters for use in photovoltaic powersystems Part 2: Particular requirements for inverters
Additional tests for gridinteractive inverters
IS 16221-2:2015 / IEC 62109-2Cl. 4.8
2642 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Safety of power converters for use in photovoltaic powersystems Part 2: Particular requirements for inverters
Additional tests for gridinteractive inverters
IS 16221-2:2015 / IEC 62109-2Cl. 4.8
2643 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Safety of power converters for use in photovoltaic powersystems Part 2: Particular requirements for inverters
Additional tests for gridinteractive inverters
IS 16221-2:2015 / IEC 62109-2Cl. 4.8
2644 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Safety of power converters for use in photovoltaic powersystems Part 2: Particular requirements for inverters
Additional tests for gridinteractive inverters
IS 16221-2:2015 / IEC 62109-2Cl. 4.8
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 236 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2645 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Safety of power converters for use in photovoltaic powersystems Part 2: Particular requirements for inverters Chemical hazard IS 16221-2:2015 / IEC 62109-2
Cl.12
2646 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Safety of power converters for use in photovoltaic powersystems Part 2: Particular requirements for inverters Electrical ratings tests IS 16221-2:2015 / IEC 62109-2
Cl. 4.7
2647 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Safety of power converters for use in photovoltaic powersystems Part 2: Particular requirements for inverters Electrical ratings tests IS 16221-2:2015 / IEC 62109-2
Cl. 4.7
2648 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Safety of power converters for use in photovoltaic powersystems Part 2: Particular requirements for inverters Marking and documentation IS 16221-2:2015 / IEC 62109-2
CL. 5
2649 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Safety of power converters for use in photovoltaic powersystems Part 2: Particular requirements for inverters Physical requirement IS 16221-2:2015 / IEC 62109-2
Cl. 13
2650 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Safety of power converters for use in photovoltaic powersystems Part 2: Particular requirements for inverters
Protection against electricshock
IS 16221-2:2015 / IEC 62109-2Cl. 7
2651 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Safety of power converters for use in photovoltaic powersystems Part 2: Particular requirements for inverters Protection against fire hazard IS 16221-2:2015 / IEC 62109-2
Cl.9
2652 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Safety of power converters for use in photovoltaic powersystems Part 2: Particular requirements for inverters
Protection against liquidhazard
IS 16221-2:2015 / IEC 62109-2Cl.11
2653 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Safety of power converters for use in photovoltaic powersystems Part 2: Particular requirements for inverters
Protection against mechanicalhazards
IS 16221-2:2015 / IEC 62109-2:Cl. 8
2654 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Safety of power converters for use in photovoltaic powersystems Part 2: Particular requirements for inverters
Protection against sonicpressure and sound level(makeTES 1352A sound level meter)
IS 16221-2:2015 / IEC 62109-2Cl.10
2655 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Safety of power converters for use in photovoltaic powersystems Part 2: Particular requirements for inverters Testing in single fault condition IS 16221-2:2015 / IEC 62109-2
CL 4.4
2656 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Safety of power converters for use in photovoltaic powersystems Part 2: Particular requirements for inverters Testing in single fault condition IS 16221-2:2015 / IEC 62109-2
CL 4.4
2657 ELECTRICAL- POWERSUPPLIES & STABILIZERS
Safety of power converters for use in photovoltaic powersystems Part 2: Particular requirements for inverters Electrical ratings tests IS 16221-2:2015 / IEC 62109-2
Cl. 4.7
2658 ELECTRICAL- POWERSUPPLIES & STABILIZERS
SOLID STATE INVERTERS RUN FROM STORAGE BATTERIES-SPECIFICATION High Voltage test Cl 7.6 of IS 13314
2659 ELECTRICAL- POWERSUPPLIES & STABILIZERS
SOLID STATE INVERTERS RUN FROM STORAGE BATTERIES-SPECIFICATION Insulation Resistance Test Cl 7.7 of IS 13314
2660 ELECTRICAL- POWERSUPPLIES & STABILIZERS
SOLID STATE INVERTERS RUN FROM STORAGE BATTERIES-SPECIFICATION Marking Cl 6 of IS 13314
2661 ELECTRICAL- POWERSUPPLIES & STABILIZERS
SOLID STATE INVERTERS RUN FROM STORAGE BATTERIES-SPECIFICATION No load Test - Current Cl 7.8 of IS 13314:
2662 ELECTRICAL- POWERSUPPLIES & STABILIZERS
SOLID STATE INVERTERS RUN FROM STORAGE BATTERIES-SPECIFICATION Visual Inspection Cl 7.5 of IS 13314
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 237 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2663 ELECTRICAL- ROTATINGELECTRICAL MACHINES
" MONOSET PUMPS FOR CLEAR, COLD WATER FORAGRICULTURAL AND WATER SUPPLY PURPOSES —SPECIFICATION"
Clear, Cold Water testrequirment Cl.4.2 of IS 9079:
2664 ELECTRICAL- ROTATINGELECTRICAL MACHINES
" MONOSET PUMPS FOR CLEAR, COLD WATER FORAGRICULTURAL AND WATER SUPPLY PURPOSES —SPECIFICATION"
Efficiency Cl. 9.4 of IS 9079:
2665 ELECTRICAL- ROTATINGELECTRICAL MACHINES
" MONOSET PUMPS FOR CLEAR, COLD WATER FORAGRICULTURAL AND WATER SUPPLY PURPOSES —SPECIFICATION"
HIGH-VOLTAGE TEST Cl 11.3 of IS 9079:
2666 ELECTRICAL- ROTATINGELECTRICAL MACHINES
" MONOSET PUMPS FOR CLEAR, COLD WATER FORAGRICULTURAL AND WATER SUPPLY PURPOSES —SPECIFICATION"
Insulation Resistance Test Cl 11.2 of IS 9079:
2667 ELECTRICAL- ROTATINGELECTRICAL MACHINES
" MONOSET PUMPS FOR CLEAR, COLD WATER FORAGRICULTURAL AND WATER SUPPLY PURPOSES —SPECIFICATION"
Locked Rotor Test Cl 11.5 of IS 9079:
2668 ELECTRICAL- ROTATINGELECTRICAL MACHINES
" MONOSET PUMPS FOR CLEAR, COLD WATER FORAGRICULTURAL AND WATER SUPPLY PURPOSES —SPECIFICATION"
Overall Efficiency by Powermeasurement Cl. 13.4 of IS 9079::
2669 ELECTRICAL- ROTATINGELECTRICAL MACHINES
" MONOSET PUMPS FOR CLEAR, COLD WATER FORAGRICULTURAL AND WATER SUPPLY PURPOSES —SPECIFICATION"
Provision for Earthing Cl. 10.5 of IS 9079:
2670 ELECTRICAL- ROTATINGELECTRICAL MACHINES
" MONOSET PUMPS FOR CLEAR, COLD WATER FORAGRICULTURAL AND WATER SUPPLY PURPOSES —SPECIFICATION"
Rated Speeds Cl 10.8.3 of IS 9079:
2671 ELECTRICAL- ROTATINGELECTRICAL MACHINES
" MONOSET PUMPS FOR CLEAR, COLD WATER FORAGRICULTURAL AND WATER SUPPLY PURPOSES —SPECIFICATION"
Rated voltage and ratedfrequency Cl 10.8.1 of IS 9079:
2672 ELECTRICAL- ROTATINGELECTRICAL MACHINES
" MONOSET PUMPS FOR CLEAR, COLD WATER FORAGRICULTURAL AND WATER SUPPLY PURPOSES —SPECIFICATION"
Rated voltage and ratedfrequency Cl 10.8.1 of IS 9079:
2673 ELECTRICAL- ROTATINGELECTRICAL MACHINES
" MONOSET PUMPS FOR CLEAR, COLD WATER FORAGRICULTURAL AND WATER SUPPLY PURPOSES —SPECIFICATION"
Rated voltage and ratedfrequency Cl 10.8.2.1 of IS 9079:
2674 ELECTRICAL- ROTATINGELECTRICAL MACHINES
" MONOSET PUMPS FOR CLEAR, COLD WATER FORAGRICULTURAL AND WATER SUPPLY PURPOSES —SPECIFICATION"
Rated voltage and ratedfrequency Cl 10.8.2.1 of IS 9079:2018
2675 ELECTRICAL- ROTATINGELECTRICAL MACHINES
" MONOSET PUMPS FOR CLEAR, COLD WATER FORAGRICULTURAL AND WATER SUPPLY PURPOSES —SPECIFICATION"
Temperature rise test atreduced voltage Cl 11.4.2 of IS 9079:
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 238 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2676 ELECTRICAL- ROTATINGELECTRICAL MACHINES
" MONOSET PUMPS FOR CLEAR, COLD WATER FORAGRICULTURAL AND WATER SUPPLY PURPOSES —SPECIFICATION"
Temperature Rise Test Cl 11.4.1 , Cl 11.4.1.1, Cl11.4.1.2 of IS 9079:
2677 ELECTRICAL- ROTATINGELECTRICAL MACHINES
" MONOSET PUMPS FOR CLEAR, COLD WATER FORAGRICULTURAL AND WATER SUPPLY PURPOSES —SPECIFICATION"
Terminal Marking and Directionof Rotation , Prime Mover Cl. 10.6 , CL 7 of IS 9079:
2678 ELECTRICAL- ROTATINGELECTRICAL MACHINES
" MONOSET PUMPS FOR CLEAR, COLD WATER FORAGRICULTURAL AND WATER SUPPLY PURPOSES —SPECIFICATION"
Three Phase Motors, Type ofmotors
Cl. 10.8.2 , Cl 10.8.2.3 of IS9079:
2679 ELECTRICAL- ROTATINGELECTRICAL MACHINES
" MONOSET PUMPS FOR CLEAR, COLD WATER FORAGRICULTURAL AND WATER SUPPLY PURPOSES —SPECIFICATION"
Voltage and FrequencyVariation Cl. 9.2 of IS 9079:
2680 ELECTRICAL- ROTATINGELECTRICAL MACHINES
" MONOSET PUMPS FOR CLEAR, COLD WATER FORAGRICULTURAL AND WATER SUPPLY PURPOSES —SPECIFICATION"
Voltage and FrequencyVariation Cl. 9.4 of IS 9079:
2681 ELECTRICAL- ROTATINGELECTRICAL MACHINES
" MONOSET PUMPS FOR CLEAR, COLD WATER FORAGRICULTURAL AND WATER SUPPLY PURPOSES —SPECIFICATION"
Discharge Rate Range (l/s) Cl. 9.1.2 of IS 9079:
2682 ELECTRICAL- ROTATINGELECTRICAL MACHINES
" MONOSET PUMPS FOR CLEAR, COLD WATER FORAGRICULTURAL AND WATER SUPPLY PURPOSES —SPECIFICATION"
Efficiency Cl. 9.4 of IS 9079:
2683 ELECTRICAL- ROTATINGELECTRICAL MACHINES
" MONOSET PUMPS FOR CLEAR, COLD WATER FORAGRICULTURAL AND WATER SUPPLY PURPOSES —SPECIFICATION"
Efficiency Cl. 9.4 of IS 9079:
2684 ELECTRICAL- ROTATINGELECTRICAL MACHINES
" MONOSET PUMPS FOR CLEAR, COLD WATER FORAGRICULTURAL AND WATER SUPPLY PURPOSES —SPECIFICATION"
Head Measurement, FlowMeasurement , current andpower measurement,Hydrostatic Pressure test
Cl 12.3 , Cl 12.4, Cl 12.5, Cl12.6 of IS 9079:
2685 ELECTRICAL- ROTATINGELECTRICAL MACHINES
" MONOSET PUMPS FOR CLEAR, COLD WATER FORAGRICULTURAL AND WATER SUPPLY PURPOSES —SPECIFICATION"
Verification of classification ,nomenclature Cl.5 and Cl. 6 of IS 9079
2686 ELECTRICAL- ROTATINGELECTRICAL MACHINES
" MONOSET PUMPS FOR CLEAR, COLD WATER FORAGRICULTURAL AND WATER SUPPLY PURPOSES —SPECIFICATION"
Verification of Declaredperformance value, value ofefficiency, requirement forpump set
Cl 11.1.6, Cl 11.1.7, Cl 11.1.8of IS 9079:
2687 ELECTRICAL- ROTATINGELECTRICAL MACHINES
" MONOSET PUMPS FOR CLEAR, COLD WATER FORAGRICULTURAL AND WATER SUPPLY PURPOSES —SPECIFICATION"
Verification of GENERALREQUIREMENTS , Casing ,Impeller , Shaft , Balancing
Cl. 10, Cl 10.1 , Cl 10.2 , Cl10.3, Cl.10.4 of IS 9079:
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 239 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2688 ELECTRICAL- ROTATINGELECTRICAL MACHINES
" MONOSET PUMPS FOR CLEAR, COLD WATER FORAGRICULTURAL AND WATER SUPPLY PURPOSES —SPECIFICATION"
Verification of GUARANTEEAND TOLERANCE ON PUMPSETPERFORMANCE , PERMISSIBLEINACCURACIES INMEASUREMENTS ( MARKINGAND PARAMETERS TO BEDECLARED BY THEMANUFACTURER )
Cl 13 , Cl 14, Cl 15 of IS 9079
2689 ELECTRICAL- ROTATINGELECTRICAL MACHINES
" MONOSET PUMPS FOR CLEAR, COLD WATER FORAGRICULTURAL AND WATER SUPPLY PURPOSES —SPECIFICATION"
Verification of ratings of singlephase motor Cl 10.8.1 of IS 9079
2690 ELECTRICAL- ROTATINGELECTRICAL MACHINES
" MONOSET PUMPS FOR CLEAR, COLD WATER FORAGRICULTURAL AND WATER SUPPLY PURPOSES —SPECIFICATION"
Verification of ratings of threephase motor Cl 10.8.2 of IS 9079:
2691 ELECTRICAL- ROTATINGELECTRICAL MACHINES AGRICULTURAL AND WATER SUPPLY PUMPS VERIFICATION OF GUARANTEE Cl 8 of IS 11346
2692 ELECTRICAL- ROTATINGELECTRICAL MACHINES Induction Motors Momentary excess torque for
motorsCl.9.4 of IS 15999-12016 /Withdrawn IEC 60034-1:
2693 ELECTRICAL- ROTATINGELECTRICAL MACHINES Induction Motors No load losses and current Cl.9.1 of IS 15999-1:2016 /
Withdrawn IEC 60034-1:
2694 ELECTRICAL- ROTATINGELECTRICAL MACHINES Induction Motors No load losses and current Cl.9.1 of IS 15999-12016 /
Withdrawn IEC 60034-1:
2695 ELECTRICAL- ROTATINGELECTRICAL MACHINES Induction Motors Occasional excess current Cl.9.3 of IS 15999-1:2016 /
Withdrawn IEC 60034-1:
2696 ELECTRICAL- ROTATINGELECTRICAL MACHINES Induction Motors Open circuit secondary induced
voltage at standstillCl.9.1 of IS 15999-1/Withdrawn IEC 60034-1:
2697 ELECTRICAL- ROTATINGELECTRICAL MACHINES Induction Motors Over speed Cl.9.7 of IS 15999-1/
Withdrawn IEC 60034-1:
2698 ELECTRICAL- ROTATINGELECTRICAL MACHINES Induction Motors Pull up torque Cl.9.5 of IS 15999-1:2016/
Withdrawn IEC 60034-1:
2699 ELECTRICAL- ROTATINGELECTRICAL MACHINES Induction Motors Resistance of winding Cl.9.1 of IS 15999-1:2016/
Withdrawn IEC 60034-1:
2700 ELECTRICAL- ROTATINGELECTRICAL MACHINES Induction Motors Safe operating speed of cage
induction motorCl.9.6 of IS 15999-1:2016/Withdrawn IEC 60034-1:
2701 ELECTRICAL- ROTATINGELECTRICAL MACHINES Induction Motors Thermal performance and tests Cl.8 of IS 15999-1:2016/
Withdrawn IEC 60034-1:
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 240 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2702 ELECTRICAL- ROTATINGELECTRICAL MACHINES Induction Motors
Verification of Duty, Rating,Site operating conditions,Electrical operating conditions,Direction of rotation, Ratingplates , MiscellaneousRequirement, Tolerances
Cl.4 , Cl 5 , Cl 6, Cl 7, Cl 9.1, Cl10, Cl 11 and Cl 12 of IS15999-1:2016/ Withdrawn IEC60034-1:2010
2703 ELECTRICAL- ROTATINGELECTRICAL MACHINES Induction Motors Withstand voltage test
Cl.9.1 and Cl.9.2 of IS15999-1:2016/ Withdrawn IEC60034-1:
2704 ELECTRICAL- ROTATINGELECTRICAL MACHINES MONOSET PUMPS Monometric Suction Lift
measurement Cl.4.1 of IS 9079:
2705 ELECTRICAL- ROTATINGELECTRICAL MACHINES OPENWELL SUBMERSIBLE PUMPSETS Breakaway (starting)torque
(Type test) Cl 14.10.1.g of IS 14220 : 2018
2706 ELECTRICAL- ROTATINGELECTRICAL MACHINES OPENWELL SUBMERSIBLE PUMPSETS Flow measurement Cl 15.4 of IS 14220
2707 ELECTRICAL- ROTATINGELECTRICAL MACHINES OPENWELL SUBMERSIBLE PUMPSETS Head measurement;
Hydrostatic pressure test Cl 15.3 and 15.5 of IS 14220
2708 ELECTRICAL- ROTATINGELECTRICAL MACHINES OPENWELL SUBMERSIBLE PUMPSETS High voltage test (Routine test
and Type test)Cl 14.9.1.b and Cl 14.10.1.b ofIS 14220
2709 ELECTRICAL- ROTATINGELECTRICAL MACHINES OPENWELL SUBMERSIBLE PUMPSETS Insulation resistance (Routine
test and Type test)Cl 14.9.1.a and Cl 14.10.1.a ofIS 14220
2710 ELECTRICAL- ROTATINGELECTRICAL MACHINES OPENWELL SUBMERSIBLE PUMPSETS Leakage Current Test Cl 14.5 of IS 14220:
2711 ELECTRICAL- ROTATINGELECTRICAL MACHINES OPENWELL SUBMERSIBLE PUMPSETS Leakage current test (Type
test) Cl 14.10.1.h of IS 14220
2712 ELECTRICAL- ROTATINGELECTRICAL MACHINES OPENWELL SUBMERSIBLE PUMPSETS Locked rotor test (Routine test
and Type test)Cl 14.9.1.d and Cl 14.10.1.f ofIS 14220
2713 ELECTRICAL- ROTATINGELECTRICAL MACHINES OPENWELL SUBMERSIBLE PUMPSETS Measurement of stator
resistance (Type test) Cl 14.10.1.c of IS 14220
2714 ELECTRICAL- ROTATINGELECTRICAL MACHINES OPENWELL SUBMERSIBLE PUMPSETS No load test (Routine test and
type tesst)Cl 14.9.1.c and Cl 14.10.1.d ofIS 14220
2715 ELECTRICAL- ROTATINGELECTRICAL MACHINES OPENWELL SUBMERSIBLE PUMPSETS Reduced voltage test (Routine
test and Type test)Cl 14.9.1.e and Cl 14.10.1.e ofIS 14220
2716 ELECTRICAL- ROTATINGELECTRICAL MACHINES OPENWELL SUBMERSIBLE PUMPSETS
Temperature rise test at ratedvoltage and at reduced voltage(Type test)
Cl 14.10.1.j and 14.10.1.k of IS14220
2717 ELECTRICAL- ROTATINGELECTRICAL MACHINES OPENWELL SUBMERSIBLE PUMPSETS Verification of Guarantee Cl 16 of IS 14220
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 241 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2718 ELECTRICAL- ROTATINGELECTRICAL MACHINES OPENWELL SUBMERSIBLE PUMPSETS
Verification of Rated Voltageand Rated Frequency, Motordesigned for operation atvoltages other than 415 V;Ratings; Type of motor asdeclared by manufacturer
Cl 13.2, Cl 13.2.2,Cl 13.2.3,Cl13.2.4 of IS 14220
2719 ELECTRICAL- ROTATINGELECTRICAL MACHINES OPENWELL SUBMERSIBLE PUMPSETS-SPECIFICATION Breakaway (Starting) Torque
Test Cl 14.7 of IS 14220:
2720 ELECTRICAL- ROTATINGELECTRICAL MACHINES OPENWELL SUBMERSIBLE PUMPSETS-SPECIFICATION Current Cl 16.3 of IS 14220:
2721 ELECTRICAL- ROTATINGELECTRICAL MACHINES OPENWELL SUBMERSIBLE PUMPSETS-SPECIFICATION High Voltage Test Cl 14.4 of IS 14220:
2722 ELECTRICAL- ROTATINGELECTRICAL MACHINES OPENWELL SUBMERSIBLE PUMPSETS-SPECIFICATION Insulation Resistance Test Cl 14.3 of IS 14220:
2723 ELECTRICAL- ROTATINGELECTRICAL MACHINES OPENWELL SUBMERSIBLE PUMPSETS-SPECIFICATION Measurement of discharge
Flow Cl 16.1 of IS 14220: :
2724 ELECTRICAL- ROTATINGELECTRICAL MACHINES OPENWELL SUBMERSIBLE PUMPSETS-SPECIFICATION Measurement of discharge
Head Cl 16.1.4 of IS 14220:
2725 ELECTRICAL- ROTATINGELECTRICAL MACHINES OPENWELL SUBMERSIBLE PUMPSETS-SPECIFICATION Overall Efficiency 16.2, of IS 14220
2726 ELECTRICAL- ROTATINGELECTRICAL MACHINES OPENWELL SUBMERSIBLE PUMPSETS-SPECIFICATION Overall efficiency Cl 16.1 of IS 14220: :
2727 ELECTRICAL- ROTATINGELECTRICAL MACHINES OPENWELL SUBMERSIBLE PUMPSETS-SPECIFICATION Rated Speed Cl 14.8 of IS 14220:
2728 ELECTRICAL- ROTATINGELECTRICAL MACHINES OPENWELL SUBMERSIBLE PUMPSETS-SPECIFICATION Rated Voltage and Rated
Frequency Cl 13.1.1 of IS 14220:
2729 ELECTRICAL- ROTATINGELECTRICAL MACHINES OPENWELL SUBMERSIBLE PUMPSETS-SPECIFICATION Rated Voltage and Rated
Frequency Cl 13.1.1 of IS 14220:
2730 ELECTRICAL- ROTATINGELECTRICAL MACHINES OPENWELL SUBMERSIBLE PUMPSETS-SPECIFICATION Rated Voltage and Rated
Frequency Cl 13.2.1 of IS 14220:
2731 ELECTRICAL- ROTATINGELECTRICAL MACHINES OPENWELL SUBMERSIBLE PUMPSETS-SPECIFICATION Speed Cl 13.3 of IS 14220:
2732 ELECTRICAL- ROTATINGELECTRICAL MACHINES OPENWELL SUBMERSIBLE PUMPSETS-SPECIFICATION Temperature Rise Test Cl 14.6 of IS 14220:
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 242 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2733 ELECTRICAL- ROTATINGELECTRICAL MACHINES OPENWELL SUBMERSIBLE PUMPSETS-SPECIFICATION
Verification of guarantee andtolerances on open wellsubmersible pump setperformance – Head anddischarge ,Current, Pumpefficiency, Overall efficiency,Prime mover rating,Permissible inaccuracies asdeclared by manufacturer ;Marking and parameters asdeclared by manufacturer
Cl 16.2, CL 16.3, Cl 16.4, Cl16.5, Cl 16.6, CL 16.7, Cl 17and Cl 18 of IS 14220:
2734 ELECTRICAL- ROTATINGELECTRICAL MACHINES OPENWELL SUBMERSIBLE PUMPSETS-SPECIFICATION
Verification of open wellsubmersible motor – Ratedvoltage and rated frequency,Motor designed for operationat voltages other than 240 V asdeclared by manufacturer
Cl 13.1.2, Cl 13.1.3 of IS 14220
2735 ELECTRICAL- ROTATINGELECTRICAL MACHINES OPENWELL SUBMERSIBLE PUMPSETS-SPECIFICATION
Visual Verification ofinformation (DIMENSIONS ANDTOLERANCES, CABLE)
Cl 11, CL 12, CL 13, Cl 13.1 ofIS 14220:
2736 ELECTRICAL- ROTATINGELECTRICAL MACHINES SUBMERSIBLE PUMPSETS Breakaway (starting)torque
(Type test) Cl 9.10.g of IS 8034
2737 ELECTRICAL- ROTATINGELECTRICAL MACHINES SUBMERSIBLE PUMPSETS Flow measurement Cl 10.2.2 of IS 8034
2738 ELECTRICAL- ROTATINGELECTRICAL MACHINES SUBMERSIBLE PUMPSETS Head measurement Cl 10.2.1 of IS 8034
2739 ELECTRICAL- ROTATINGELECTRICAL MACHINES SUBMERSIBLE PUMPSETS High voltage test (Routine test) Cl 9.9.b of IS 8034
2740 ELECTRICAL- ROTATINGELECTRICAL MACHINES SUBMERSIBLE PUMPSETS High voltage test (Type test) Cl 9.10.b of IS 8034
2741 ELECTRICAL- ROTATINGELECTRICAL MACHINES SUBMERSIBLE PUMPSETS Insulation resistance test
(Routine test) Cl 9.9.a of IS 8034
2742 ELECTRICAL- ROTATINGELECTRICAL MACHINES SUBMERSIBLE PUMPSETS Insulation resistance test (Type
test) Cl 9.10.a of IS 8034
2743 ELECTRICAL- ROTATINGELECTRICAL MACHINES SUBMERSIBLE PUMPSETS Leakage current test (Type
test) Cl 9.10.h of IS 8034
2744 ELECTRICAL- ROTATINGELECTRICAL MACHINES SUBMERSIBLE PUMPSETS Locked rotor test (Routine test) Cl 9.9.d of IS 8034
2745 ELECTRICAL- ROTATINGELECTRICAL MACHINES SUBMERSIBLE PUMPSETS Locked rotor test (Type test) Cl 9.10.f of IS 8034
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 243 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2746 ELECTRICAL- ROTATINGELECTRICAL MACHINES SUBMERSIBLE PUMPSETS Measurement of stator
resistance (Type test) Cl 9.10.c of IS 8034
2747 ELECTRICAL- ROTATINGELECTRICAL MACHINES SUBMERSIBLE PUMPSETS Momentary overload test Cl 9.10.m of IS 8034
2748 ELECTRICAL- ROTATINGELECTRICAL MACHINES SUBMERSIBLE PUMPSETS No load test (Routine test) Cl 9.9.c of IS 8034
2749 ELECTRICAL- ROTATINGELECTRICAL MACHINES SUBMERSIBLE PUMPSETS No load test (Type test) Cl 9.10.d of IS 8034
2750 ELECTRICAL- ROTATINGELECTRICAL MACHINES SUBMERSIBLE PUMPSETS Reduced voltage test (Type
test) Cl 9.10.e of IS 8034
2751 ELECTRICAL- ROTATINGELECTRICAL MACHINES SUBMERSIBLE PUMPSETS Temperature rise test at rated
voltage (Type test) Cl 9.10.j of IS 8034
2752 ELECTRICAL- ROTATINGELECTRICAL MACHINES SUBMERSIBLE PUMPSETS Temperature rise test at
reduced voltage (Type test) Cl 9.10.k of IS 8034
2753 ELECTRICAL- ROTATINGELECTRICAL MACHINES SUBMERSIBLE PUMPSETS
Verification of generalrequirements - Motor designedfor operation at voltages otherthan 240 V
Cl 8.10.1.3 of IS 8034
2754 ELECTRICAL- ROTATINGELECTRICAL MACHINES SUBMERSIBLE PUMPSETS
Verification of tests applicablefor Electrical performancesubmersible motor
Cl 9, Cl 9.1 and Cl 9.1.1, Cl9.1.3, Cl 9.1.4, Cl 9.1.5, Cl9.1.6, Cl 9.1.7, Cl 9.1.8 & Cl9.1.9 of IS 8034 :
2755 ELECTRICAL- ROTATINGELECTRICAL MACHINES SUBMERSIBLE PUMPSETS-SPECIFICATION Breakaway (Starting)Torque
Test Cl 9.7 of IS 8034 :
2756 ELECTRICAL- ROTATINGELECTRICAL MACHINES SUBMERSIBLE PUMPSETS-SPECIFICATION Current Cl 11.3 of IS 8034 :
2757 ELECTRICAL- ROTATINGELECTRICAL MACHINES SUBMERSIBLE PUMPSETS-SPECIFICATION High Voltage Test Cl 9.3 of IS 8034 :
2758 ELECTRICAL- ROTATINGELECTRICAL MACHINES SUBMERSIBLE PUMPSETS-SPECIFICATION Hydrostatic Pressure Test Cl 10.3 of IS 8034
2759 ELECTRICAL- ROTATINGELECTRICAL MACHINES SUBMERSIBLE PUMPSETS-SPECIFICATION Hydrostatic Pressure Test Upto
250m head Cl 10.3 of IS 8034 :
2760 ELECTRICAL- ROTATINGELECTRICAL MACHINES SUBMERSIBLE PUMPSETS-SPECIFICATION Insulation Resistance Test Cl 9.2 of IS 8034 :
2761 ELECTRICAL- ROTATINGELECTRICAL MACHINES SUBMERSIBLE PUMPSETS-SPECIFICATION Leakage Current Test Cl 9.4 of IS 8034
2762 ELECTRICAL- ROTATINGELECTRICAL MACHINES SUBMERSIBLE PUMPSETS-SPECIFICATION Leakage Current Test, Upto
50mA Cl 9.4 of IS 8034 :
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 244 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2763 ELECTRICAL- ROTATINGELECTRICAL MACHINES SUBMERSIBLE PUMPSETS-SPECIFICATION Overall Efficiency Cl 11.5 of IS 8034
2764 ELECTRICAL- ROTATINGELECTRICAL MACHINES SUBMERSIBLE PUMPSETS-SPECIFICATION Overall Efficiency - Power
measurement Cl 11.5 of IS 8034
2765 ELECTRICAL- ROTATINGELECTRICAL MACHINES SUBMERSIBLE PUMPSETS-SPECIFICATION Rated speed Cl 8.10.1.6 of IS 8034 :
2766 ELECTRICAL- ROTATINGELECTRICAL MACHINES SUBMERSIBLE PUMPSETS-SPECIFICATION Rated speed Cl 8.10.2.5 of IS 8034 :
2767 ELECTRICAL- ROTATINGELECTRICAL MACHINES SUBMERSIBLE PUMPSETS-SPECIFICATION Rated voltage and rated
frequencyCl 8.10.1.1 and Cl 8.10.1.2 ofIS 8034 :
2768 ELECTRICAL- ROTATINGELECTRICAL MACHINES SUBMERSIBLE PUMPSETS-SPECIFICATION Rated voltage and rated
frequency Cl 8.10.2.1 of IS 8034 :
2769 ELECTRICAL- ROTATINGELECTRICAL MACHINES SUBMERSIBLE PUMPSETS-SPECIFICATION Rated voltage and rated
frequency Cl 8.10.2.1 of IS 8034 :
2770 ELECTRICAL- ROTATINGELECTRICAL MACHINES SUBMERSIBLE PUMPSETS-SPECIFICATION Ratings ,Types of motors Cl 8.10.1.4 , Cl 8.10.1.5 of IS
8034 :
2771 ELECTRICAL- ROTATINGELECTRICAL MACHINES SUBMERSIBLE PUMPSETS-SPECIFICATION Speed Cl 9.8 of IS 8034 :
2772 ELECTRICAL- ROTATINGELECTRICAL MACHINES SUBMERSIBLE PUMPSETS-SPECIFICATION Temperature Rise Test Cl 9.5 of IS 8034 :
2773 ELECTRICAL- ROTATINGELECTRICAL MACHINES SUBMERSIBLE PUMPSETS-SPECIFICATION
Verification of generalrequirements - Motor designedfor operation at voltages otherthan 415 V; Ratings; Type ofmotors
Cl 8.10.2.2 , Cl 8.10.2.3 ,Cl8.10.2.4 of IS 8034 : 2018
2774 ELECTRICAL- ROTATINGELECTRICAL MACHINES
TESTS FOR AGRICULTURAL AND WATER SUPPLY PUMPS -CODE OF ACCEPTANCE Product : AGRICULTURAL ANDWATER SUPPLY PUMPS
Computation of Test Readings -Efficiency Cl 6 of IS 11346: 2002, RA:
2775 ELECTRICAL- ROTATINGELECTRICAL MACHINES
TESTS FOR AGRICULTURAL AND WATER SUPPLY PUMPS -CODE OF ACCEPTANCE Product : AGRICULTURAL ANDWATER SUPPLY PUMPS
Measurement of Rate of Flow,Head Measurement , PowerMeasurement
Cl.3.1.1, Cl.3.1.2, Cl.3.1.3 of IS11346: 2002
2776 ELECTRICAL- ROTATINGELECTRICAL MACHINES
TESTS FOR AGRICULTURAL AND WATER SUPPLY PUMPS -CODE OF ACCEPTANCE Product : AGRICULTURAL ANDWATER SUPPLY PUMPS
Observation, Measurement ofPressure (Head) Cl 6 of IS 11346: 2002, RA
2777 ELECTRICAL- ROTATINGELECTRICAL MACHINES
TESTS FOR AGRICULTURAL AND WATER SUPPLY PUMPS -CODE OF ACCEPTANCE Product : AGRICULTURAL ANDWATER SUPPLY PUMPS
OBSERVATIONS - VoltageMeasurement Cl 6 of IS 11346: 2002, RA
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 245 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2778 ELECTRICAL- ROTATINGELECTRICAL MACHINES
TESTS FOR AGRICULTURAL AND WATER SUPPLY PUMPS -CODE OF ACCEPTANCE Product : AGRICULTURAL ANDWATER SUPPLY PUMPS
OBSERVATIONS , Power factormeasurement Cl 6 of IS 11346: 2002, RA
2779 ELECTRICAL- ROTATINGELECTRICAL MACHINES
TESTS FOR AGRICULTURAL AND WATER SUPPLY PUMPS -CODE OF ACCEPTANCE Product : AGRICULTURAL ANDWATER SUPPLY PUMPS
OBSERVATIONS , PowerMeasurement Cl 6 of IS 11346: 2002, RA
2780 ELECTRICAL- ROTATINGELECTRICAL MACHINES
TESTS FOR AGRICULTURAL AND WATER SUPPLY PUMPS -CODE OF ACCEPTANCE Product : AGRICULTURAL ANDWATER SUPPLY PUMPS
OBSERVATIONS, CurrentMeasurement Cl 6 of IS 11346: 2002, RA
2781 ELECTRICAL- ROTATINGELECTRICAL MACHINES
TESTS FOR AGRICULTURAL AND WATER SUPPLY PUMPS -CODE OF ACCEPTANCE Product : AGRICULTURAL ANDWATER SUPPLY PUMPS
OBSERVATIONS, frequency Cl 6 of IS 11346:
2782 ELECTRICAL- ROTATINGELECTRICAL MACHINES
TESTS FOR AGRICULTURAL AND WATER SUPPLY PUMPS -CODE OF ACCEPTANCE Product : AGRICULTURAL ANDWATER SUPPLY PUMPS
OBSERVATIONS, Gaugedistance correction factor, 2 Cl 6 of IS 11346: 2002, RA
2783 ELECTRICAL- ROTATINGELECTRICAL MACHINES
TESTS FOR AGRICULTURAL AND WATER SUPPLY PUMPS -CODE OF ACCEPTANCE Product : AGRICULTURAL ANDWATER SUPPLY PUMPS
OBSERVATIONS, Measurementof Flow Cl 6 of IS 11346: 2002, RA
2784 ELECTRICAL- ROTATINGELECTRICAL MACHINES
TESTS FOR AGRICULTURAL AND WATER SUPPLY PUMPS -CODE OF ACCEPTANCE Product : AGRICULTURAL ANDWATER SUPPLY PUMPS
OBSERVATIONS, Measurementof RPM Cl 6 of IS 11346: 2002, RA
2785 ELECTRICAL- ROTATINGELECTRICAL MACHINES
TESTS FOR AGRICULTURAL AND WATER SUPPLY PUMPS -CODE OF ACCEPTANCE Product : AGRICULTURAL ANDWATER SUPPLY PUMPS
Speed Measurement Cl.3.1.4 , Cl 3.2.4 of IS11346:2002 , RA
2786ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
ELECTRICAL TIMER RELAYS FOR INDUSTRIAL PURPOSE PartIII: Electronic
Verification of Limits ofOperation Verification ofResetting time SettingAccuracy test Repeat Accuracytest
IS 5834,(Part III)-1981Amendment 1994 Reaffirmed
2787ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
High Voltage Circuit Breakers 4. Single capacitor bankcurrent switching tests
IS/IEC 62271-100: 2008(Reaffirmed 2017) IEC62271-100
2788ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Synchrophasor Measurements for Power Systems Measurement reporting latencycompliance
IEEE C37.118.1, 2011 IEEEC37.118.1a
2789ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
-type fuses Low voltage fuses Cartridge fuses for voltageupto and including 1000 V a.c. and 1500 V d.c. Miniaturefuses carriers & bases used in rewirable type electricalfuses for voltages upto 650 V
Short circuit breaking capacityIS 8187 : 1976 (RA 2016) IEC60269-1 : 2014-06 BS 88: 1988IEC 60127-1 :
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 246 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2790ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
11 kV Horn gap fuse DO fuse, HG fuses & expulsion fuses Temperature rise test IS:9385-2:2018 IEC60282-2:2008 IS:9385-1 & 2
2791ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
a. Measuring relays and protection equipment b.ELECTRICAL TIMER RELAYS FOR INDUSTRIAL PURPOSE PartIII:Electronic
Dielectric test/ Dielectricvoltage test
IEC 60255-27, 2013, IS 5834(Part III)-1981 Amendment1994 Reaffirmed
2792ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
a. Measuring relays and protection equipment b.ELECTRICAL TIMER RELAYS FOR INDUSTRIAL PURPOSE PartIII:Electronic
Dielectric test/ Dielectricvoltage test
IEC 60255-27, 2013, IS 5834(Part III)-1981 Amendment1994 Reaffirmed
2793ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
a. Measuring relays and protection equipment b.ELECTRICAL TIMER RELAYS FOR INDUSTRIAL PURPOSE PartIII:Electronic
Impulse voltage testIS/IEC 60255:Part 27:2013 IS5834 (Part III)-1981Amendment 1994
2794ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
a. Measuring relays and protection equipment b.ELECTRICAL TIMER RELAYS FOR INDUSTRIAL PURPOSE PartIII:Electronic
Measurement of Insulationresistance/InsulationResistance
IEC 60255-27, 2013, IS 5834(Part III)-1981 Amendment1994 Reaffirmed
2795ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
a. Measuring relays and protection equipment b.ELECTRICAL TIMER RELAYS FOR INDUSTRIAL PURPOSE PartIII:Electronic
Measurement of Insulationresistance/InsulationResistance
IS/IEC 60255:Part 27:2013 IEC60255-27, 2013 IS 5834(partIII)-1981 Amendment 1994Reaffirmed
2796ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
A.C Metal enclosed Switchgear & Control-gear Short Time current test
IEC 62271-203 2011 IEC 62271– 201-2014 IS/IEC 62271-1:2007 (Reaffirmed 2018) IEC62271-1: 2017 ANSI/IEEE :C37.20.2
2797ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
A.C Metal enclosed Switchgear & Control-gear Short Time current test
IEC 62271-203 2011 IEC 62271– 201-2014 IS/IEC 62271-1:2007 (Reaffirmed 2018) IEC62271-1: 2017 ANSI/IEEE :C37.20.2
2798ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
A.C. Circuit Breakers for Railway applications Temperature Rise Test IEC 6007-4
2799ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
A.C. Circuit Breakers for Railway applications Temperature Rise Test IEC 60077-4
2800ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
AC disconnec- tors and Earth Switches Short Time current testInduced current switching test
IS 9921 part 1,2,3,4, 5 2007,IEC 62271-102
2801ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
AC disconnec- tors and Earth Switches Short Time current testInduced current switching test
IS 9921 part 1,2,3,4,5 2007,IEC 62271-102
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 247 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2802ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
AC insulation enclosed switchgear and controlgear for ratedvoltages above 1 kV and up to and including 52 kV Short time current test IEC 62271-201 :
2803ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
AC metal enclosed switchgear and controlgear for ratedvoltages above 1 kV and upto 52 kV Short time current test
IEC 62271-200: 2011IS:3427:1997 (RA 2012) IS/IEC62271-200:2011 RA
2804ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
All types of Electrical, Electronic Instruments, Equipment,components, PCB’s, MCB’s, ACB’s Rack mountedEquipment, Instrument/ Equipment panels, Relays andother articles
Dry Heat (High Temperature)Test
IEC 60068-2-2:2007 IS 9000,Part 3, Section 1 to 5:1977 IEC60571
2805ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
All types of Electrical, Electronic Instruments, Equipment,components, PCB’s, MCB’s, ACB’s Rack mountedEquipment, Instrument/ Equipment panels, Relays andother articles
Cold (Low Temeperature) TestIEC 60068-2-1 2007, IS 9000part 2 sec 1 to 4 2016, IEC60571
2806ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
All types of Electrical, Electronic Instruments, Equipment,components, PCB’s, MCB’s, ACB’s Rack mountedEquipment, Instrument/ Equipment panels, Relays andother articles
Cold (Low Temeperature) TestIEC 60068-2-1:2007 IS 9000,Part 2, Section 1 to 4:1977(Reaffirmed 2016) IEC 60571
2807ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
All types of Electrical, Electronic Instruments, Equipment,components, PCB’s, MCB’s, ACB’s Rack mountedEquipment, Instrument/ Equipment panels, Relays andother articles
Cold (Low Temperature) TestIEC 60068-2-1:2007 IS 9000,Part 2, Section 1 to 4:1977(Reaffirmed 2016) IEC 60571:
2808ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
All types of Electrical, Electronic Instruments, Equipment,components, PCB’s, MCB’s, ACB’s Rack mountedEquipment, Instrument/ Equipment panels, Relays andother articles
Cold (Low Temperature) TestIEC 60068-2-1:2007 IS 9000,Part 2, Section 1 to 4:1977(Reaffirmed 2016) IEC 60571:
2809ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
All types of Electrical, Electronic Instruments, Equipment,components, PCB’s, MCB’s, ACB’s Rack mountedEquipment, Instrument/ Equipment panels, Relays andother articles
Cold (Low Temperature) TestIEC 60068-2-1:2007 IS 9000,Part 2, Section 1 to 4:1977(Reaffirmed 2016) IEC 60571:
2810ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
All types of Electrical, Electronic Instruments, Equipment,components, PCB’s, MCB’s, ACB’s Rack mountedEquipment, Instrument/ Equipment panels, Relays andother articles
Composite Temperature &Humidity Test
IEC 60068-2-30:2005 IS 9000,Part 5, Section 1 & 2:1981(Reaffirmed 2016) IEC60068-2-78:2012 IS 9000, Part4:2008 (Reaffirmed 2015) IEC60571
2811ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
All types of Electrical, Electronic Instruments, Equipment,components, PCB’s, MCB’s, ACB’s Rack mountedEquipment, Instrument/ Equipment panels, Relays andother articles
Composite Temperature &Humidity Test
IEC 60068-2-30:2005 IS 9000,Part 5, Section 1 & 2:1981(Reaffirmed 2016) IEC60068-2-78:2012 IS 9000, Part4:2008 (Reaffirmed 2015) IEC60571:
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 248 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2812ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
All types of Electrical, Electronic Instruments, Equipment,components, PCB’s, MCB’s, ACB’s Rack mountedEquipment, Instrument/ Equipment panels, Relays andother articles
Composite Temperature &Humidity Test
IEC 60068-2-30:2005 IS 9000,Part 5, Section 1 & 2:1981(Reaffirmed 2016) IEC60068-2-78:2012 IS 9000, Part4:2008 (Reaffirmed 2015) IEC60571: 2012
2813ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
All types of Electrical, Electronic Instruments, Equipment,components, PCB’s, MCB’s, ACB’s Rack mountedEquipment, Instrument/ Equipment panels, Relays andother articles
Composite Temperature &Humidity Test
IEC 60068-2-30:2005 IS 9000,Part 5, Section 1 & 2:1981(Reaffirmed 2016) IEC60068-2-78:2012 IS 9000, Part4:2008 (Reaffirmed 2015) IEC60571: 2012
2814ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
All types of Electrical, Electronic Instruments, Equipment,components, PCB’s, MCB’s, ACB’s Rack mountedEquipment, Instrument/ Equipment panels, Relays andother articles
Dry Heat (High Temperature)Test
IEC 60068-2-2:2007 IS 9000,Part 3, Section 1 to 5:1977 IEC60571
2815ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
All types of Electrical, Electronic Instruments, Equipment,components, PCB’s, MCB’s, ACB’s Rack mountedEquipment, Instrument/ Equipment panels, Relays andother articles
Dry Heat (High Temperature)Test
IEC 60068-2-2:2007 IS 9000,Part 3, Section 1 to 5:1977 IEC60571
2816ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
All types of Electrical, Electronic Instruments, Equipment,components, PCB’s, MCB’s, ACB’s Rack mountedEquipment, Instrument/ Equipment panels, Relays andother articles
Dry Heat (High Temperature)Test
IEC 60068-2-2:2007 IS 9000,Part 3, Section 1 to 5:1977 IEC60571
2817ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
All types of Electrical, Electronic Instruments, Equipment,components, PCB’s, MCB’s, ACB’s Rack mountedEquipment, Instrument/ Equipment panels, Relays andother articles
Dry Heat (High Temperature)Test
IEC 60068-2-2:2007 IS 9000,Part 3, Section 1 to 5:1977 IEC60571
2818ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
All types of Electrical, Electronic Instruments, Equipment,components, PCB’s, MCB’s, ACB’s Rack mountedEquipment, Instrument/ Equipment panels, Relays andother articles
Temperature Cycling Test IEC 60068-2-14:2009 IS : 9000,Part 6:1978 (Reaffirmed 2016)
2819ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
All types of Electrical, Electronic Instruments, Equipment,components, PCB’s, MCB’s, ACB’s Rack mountedEquipment, Instrument/ Equipment panels, Relays andother articles
Temperature Cycling Test IEC 60068-2-14:2009 IS : 9000,Part 6:1978 (Reaffirmed 2016)
2820ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
All types of Electrical, Electronic Instruments, Equipment,components, PCB’s, MCB’s, ACB’s Rack mountedEquipment, Instrument/ Equipment panels, Relays andother articles
Temperature Cycling Test IEC 60068-2-14:2009 IS : 9000,Part 6:1978 (Reaffirmed 2016)
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 249 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2821ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
All types of Electrical, Electronic Instruments, Equipment,components, PCB’s, MCB’s, ACB’s Rack mountedEquipment, Instrument/ Equipment panels, Relays andother articles
Temperature Cycling Test IEC 60068-2-14:2009 IS : 9000,Part 6:1978 (Reaffirmed 2016)
2822ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
All types of Electrical, Electronic Instruments, Equipment,components, PCB’s, MCB’s, ACB’s Rack mountedEquipment, Instrument/ Equipment panels, Rolling Stockequipment for Railway applications and other articles
Mechanical Shock Test & BumpTest
IEC 60068-2-27:2008 IS 9000,Part 7, Section 1: 2006,(Reaffirmed 2016) IS 9000,Part 7, Section 2: 1979,(Reaffirmed 2016) IEC61373:2010
2823ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
All types of Electrical, Electronic Instruments, Equipment,components, PCB’s, MCB’s, ACB’s Rack mountedEquipment, Instrument/ Equipment panels, Rolling Stockequipment for Railway applications and other articles
Mechanical Shock Test & BumpTest
IEC 60068-2-27:2008 IS 9000,Part 7, Section 1: 2006,(Reaffirmed 2016) IS 9000,Part 7, Section 2: 1979,(Reaffirmed 2016) IEC61373:2010
2824ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
All types of Electrical, Electronic Instruments, Equipment,components, PCB’s, MCB’s, ACB’s Rack mountedEquipment, Instrument/ Equipment panels, Rolling Stockequipment for Railway applications and other articles
Random Vibration Test IEC 60068-2-64:2008 IEC61373:2010
2825ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
All types of Electrical, Electronic Instruments, Equipment,components, PCB’s, MCB’s, ACB’s Rack mountedEquipment, Instrument/ Equipment panels, Rolling Stockequipment for Railway applications and other articles
Random Vibration Test IEC 60068-2-64:2008 IEC61373:2010
2826ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
All types of Electrical, Electronic Instruments, Equipment,components, PCB’s, MCB’s, ACB’s Rack mountedEquipment, Instrument/ Equipment panels, Rolling Stockequipment for Railway applications and other articles
Sine Vibration TestIEC 60068-2-6:2007 JSS55555:2012, Test No.28 IS9000, Part 8:1981 (Reaffirmed2015)
2827ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
All types of Electrical, Electronic Instruments, Equipment,components, PCB’s, MCB’s, ACB’s Rack mountedEquipment, Instrument/ Equipment panels, Rolling Stockequipment for Railway applications and other articles
Sine Vibration TestIEC 60068-2-6:2007 JSS55555:2012, Test No.28 IS9000, Part 8:1981 (Reaffirmed2015)
2828ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Alternating current disconnector(isolators)& earthing switchfor voltages above 1 kV Short time current test
IS 9921 : 1981 (RA 2012) IEC62271-102 : 2018 IS/IEC62271-102:2003 RA
2829ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Arrester Disconnector Switches Disconnectors Switchdisconector & fuse combination units Contactors & motorstarters Control circuit devices & switching elementsComposite units of air break switches and rewireable typefuses for voltages not exceeding 650 V a.c.
Rated making and breakingcapacity test
IS/IEC 60947 (Part 1: 2007RA:2012& Part 3 :2003RA:2013 ) IEC 60947 (Part1:2014-09 & Part 3
2830ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Automatic circuit recloser Short time current test IEC 62271-111:
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 250 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2831ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Basic Short circuit test duties and short line fault tests -Direct test facility - Synthetic test facility High Voltage Circuit Breakers
IS/IEC 62271-100: 2008(Reaffirmed 2017) IEC62271-100:2017 IEC 62271 –101:2017
2832ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Biased (percentage) differential relays Tests related to accuracy andoperating characteristics
IEC 60255-13,1980 IS/IEC60255: Part 13
2833ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Biased (percentage) differential relays Tests related to accuracy andoperating characteristics
IEC 60255-13,1980 IS/IEC60255: Part 13:
2834ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Biased (percentage) differential relays Tests related to accuracy andoperating characteristics
IEC 60255-13,1980 IS/IEC60255: Part 13:
2835ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Biased (percentage) differential relays Tests related to accuracy andoperating characteristics
IEC 60255-13,1980 IS/IEC60255: Part 13:
2836ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Biased (percentage) differential relays Tests related to accuracy andoperating characteristics
IEC 60255-13,1980 IS/IEC60255: Part 13:
2837ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Circuit breakers Switches Disconnectors Switchdisconnector & fuse combination units Contactors & motorstarters Control circuit devices & switching elements
Temperature rise
IS/IEC 60947 part 1 2007(RA-2017) & Part 2 -2003(Ra-2017) & part 3 2012(RA-2018) & Part 4-1:2012(Ra-2018) IEC 60947 part 12014-09 & part 3 , IEC60947-1-2014, IEC60947-2-2016, IEC 60947-3
2838ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Circuit breakers Short circuit making &breaking capacity
IS/IEC 60947 (Part 1: 2007 RA:2017 & Part 2 :2003 RA:2017)IEC 60947 (Part 1:2014-09 &part 2
2839ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Circuit breakersDielectric-properties Degree ofprotection of enclosedequipment Routine & Samplingtests
IS/IEC 60947 (Part 1: 2007 RA:2017 & Part 2 :2003 RA:2017)IEC 60947 (Part 1:2014-09 &part 2
2840ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Circuit breakers Electrical durability Electrical &Mechanical endurance
IS/IEC 60947 (Part 1: 2007 &Part 2 :2003 RA:2017) IEC60947 (Part 1:2014-09 & part 2
2841ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Circuit breakersMaking and breaking capacitiesOperating limits Operationalperformance
IS/IEC 60947 (Part 1: 2007 RA:2017 & Part 2 :2003 RA:2017)IEC 60947 (Part 1:2014-09 &part 2
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 251 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2842ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Circuit breakers Overload performanceIS/IEC 60947 (Part 1: 2007 RA :2017 & Part 2 :2003 RA:2017)IEC 60947 (Part 1:2014-09 &part 2
2843ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Circuit breakers Overload performanceIS/IEC 60947 (Part 1: 2007 RA :2017 & Part 2 :2003 RA:2017)IEC 60947 (Part 1:2014-09 &part 2
2844ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Circuit breakers Short circuit making &breaking capacity
IS/IEC 60947 (Part 1: 2007 RA:2017 & Part 2 :2003 RA:2017)IEC 60947 (Part 1:2014-09 &part 2
2845ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Circuit breakers Short time current testIS/IEC 60947 (Part 1: 2007 RA :2017& Part 2 :2003 RA:2017)IEC 60947 (Part 1:2014-09 &part 2
2846ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Circuit breakers Short time current testIS/IEC 60947 (Part 1: 2007 RA :2017& Part 2 :2003 RA:2017)IEC 60947 (Part 1:2014-09 &part 2
2847ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Circuit breakers Short time current testIS/IEC 60947 (Part 1: 2007 RA :2017& Part 2 :2003 RA:2017)IEC 60947 (Part 1:2014-09 &part 2
2848ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Circuit breakers Temperature riseIS/IEC 60947 (Part 1: 2007 RA:2017 & Part 2 :2003 RA:2017)IEC 60947 (Part 1:2014-09 &part 2
2849ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Composite units of air break switches and rewireable typefuses for voltages not exceeding 650 V a.c. AC Miniaturecircuit breaker boards for voltage not exceeding 1 kVDistribution pillars for voltages not exceeding 1000 V ACand 1200 V DC Enclosed distribution fuse boards andcutouts for voltages not exceeding 1000 V AC and 1200 VDC LV Rewirable fuses
Short circuit breaking capacityIS 10027 : 2018 IS 13032 :1991 (RA 2016) IS 5039: 1983(RA 2016) IS 2675:1983 (RA2016) IS:2086 : 1993 (RA :
2850ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Composite units of air break switches and rewireable typefuses for voltages not exceeding 650 V a.c. AC Miniaturecircuit breaker boards for voltage not exceeding 1 kVDistribution pillars for voltages not exceeding 1000 V ACand 1200 V DC Enclosed distribution fuse boards andcutouts for voltages not exceeding 1000 V AC and 1200 VDC LV Rewirable fuses
Temperature rise Poweracceptance
IS 10027 : 2018 IS 13032 :1991 (RA 2016) IS 5039: 1983(RA 2016) IS 2675:1983 (RA2016) IS:2086 : 1993 (RA :
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 252 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2851ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Composite units of air break switches and rewireable typefuses for voltages not exceeding 650 V a.c.
Electrical durability Electrical &Mechanical endurance IS 10027 : 2018 (RA
2852ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Composite units of air break switches and rewireable typefuses for voltages not exceeding 650 V a.c.
Rated making and breakingcapacity test IS 10027
2853ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Composite units of air break switches and rewireable typefuses for voltages not exceeding 650 V a.c.
Rated making and breakingcapacity test IS 10027
2854ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Contactors & motor starters Electrical durability Electrical &Mechanical endurance
IS /IEC 60947 part 1 2012 &part 4-1 2013, IEC 60947 part1 2014-09 & part 4-1
2855ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Contactors & motor startersDielectric-properties Degree ofprotection of enclosedequipment Routine & Samplingtests
IS/IEC 60947 (Part 1: 2007 RA:2017& Part 4-1 :2000 RA:2018) IEC 60947 (Part1:2014-09 & Part 4-1
2856ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Contactors & motor starters Electrical durability Electrical &Mechanical endurance
IS/IEC 60947 (Part 1: 2007 RA:2017& Part 4-1 :2012 RA:2018) IEC 60947 (Part1:2014-09 & Part 4-1
2857ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Contactors & motor startersMaking and breaking capacitiesOperating limits Operationalperformance
IS/IEC 60947 (Part 1: 2007 RA:2017& Part 4-1 :2000 RA:2018) IEC 60947 (Part1:2014-09 & Part 4-1
2858ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Contactors & motor starters Rated making and breakingcapacity test
IS/IEC 60947 (Part 1: 2007 RA:2017& Part 4-1 :2012 RA:2018) IEC 60947 (Part1:2014-09 & Part 4-1
2859ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Contactors & motor starters Short circuit making &breaking capacity
IS/IEC 60947 (Part 1: 2007 RA:2017& Part 4-1 :2000 RA:2018) IEC 60947 (Part1:2014-09 & Part 4-1
2860ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Contactors & motor starters Short circuit making &breaking capacity
IS/IEC 60947 (Part 1: 2007 RA:2017& Part 4-1 :2000 RA:2018) IEC 60947 (Part1:2014-09 & Part 4-1
2861ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Contactors & motor starters Short time current testIS/IEC 60947 (Part 1: 2007 RA:2017& Part 4-1 :2012 RA:2018) IEC 60947 (Part1:2014-09 & Part 4-1
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 253 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2862ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Contactors & motor starters Short time current testIS/IEC 60947 (Part 1: 2007 RA:2017& Part 4-1 :2012 RA:2018) IEC 60947 (Part1:2014-09 & Part 4-1
2863ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Contactors & motor starters Short time current testIS/IEC 60947 (Part 1: 2007 RA:2017& Part 4-1 :2012 RA:2018) IEC 60947 (Part1:2014-09 & Part 4-1
2864ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Contactors & motor starters Temperature riseIS/IEC 60947 (Part 1: 2007 RA:2017& Part 4-1 :2000 RA:2018) IEC 60947 (Part1:2014-09 & Part 4-1
2865ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Control circuit devices & switching Rated making and breakingcapacity test
IS/IEC 60947 (Part 1: 2007 RA:2012 & Part 5-1 :2003 RA:2013) IEC 60947 (Part1:2014-09 & Part 5
2866ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Control circuit devices & switching elements Electrical durability Electrical &Mechanical endurance
IS/IEC 60947 part 1 2012 &part 5-1 2013, IEC 60947 part1 2014-09 & part 5
2867ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Control circuit devices & switching elementsDielectric-properties Degree ofprotection of enclosedequipment Routine & Samplingtests
IS/IEC 60947 (Part 1: 2007 RA:2017 & Part 5-1 :2009 RA:2018) IEC 60947 (Part1:2014-09 & Part 5-1: 2016Part 5-2: 2012 Part 5-3
2868ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Control circuit devices & switching elements Electrical durability Electrical &Mechanical endurance
IS/IEC 60947 (Part 1: 2017 RA:2017 & Part 5-1 :2009 (RA :2018) IEC 60947 (Part1:2014-09 & Part 5
2869ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Control circuit devices & switching elementsMaking and breaking capacitiesOperating limits Operationalperformance
IS/IEC 60947 (Part 1: 2007 RA:2017 & Part 5-1 :2009 RA:2018) IEC 60947 (Part1:2014-09 & Part 5-1: 2016Part 5-2: 2012 Part 5-3:
2870ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Control circuit devices & switching elements Rated making and breakingcapacity test
IS/IEC 60947 (Part 1: 2007 RA:2017 & Part 5-1 :2009 RA:2018) IEC 60947 (Part1:2014-09 & Part 5:
2871ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Control circuit devices & switching elements Short circuit making &breaking capacity
IS/IEC 60947 (Part 1: 2007 RA:2017 & Part 5-1 :2009 RA:2018) IEC 60947 (Part1:2014-09 & Part 5-1: 2016Part 5-2: 2012 Part 5-3:
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 254 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2872ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Control circuit devices & switching elements Short circuit making &breaking capacity
IS/IEC 60947 (Part 1: 2007 RA:2017 & Part 5-1 :2009 RA:2018) IEC 60947 (Part1:2014-09 & Part 5-1: 2016Part 5-2: 2012 Part 5-3:
2873ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Control circuit devices & switching elements Short time current testIS/IEC 60947 (Part 1: 2007 RA:2017 & Part 5-1 :2009 RA :2018) IEC 60947 (Part1:2014-09 & Part 5
2874ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Control circuit devices & switching elements Short time current testIS/IEC 60947 (Part 1: 2007 RA:2017 & Part 5-1 :2009 RA :2018) IEC 60947 (Part1:2014-09 & Part 5
2875ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Control circuit devices & switching elements Short time current testIS/IEC 60947 (Part 1: 2007 RA:2017 & Part 5-1 :2009 RA :2018) IEC 60947 (Part1:2014-09 & Part 5:
2876ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Control circuit devices & switching elements Temperature rise
IS/IEC 60947 (Part 1: 2007 RA:2017 & Part 5-1 :2009 RA:2018) IEC 60947 (Part1:2014-09 & Part 5-1: 2016Part 5-2: 2012 Part 5-3
2877ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Current Transformers Power Transformers Distribu-tionTrans-formers, Traction transformers, Potentialtransformers
Short Time current test Abilityto withstand short circuit & allroutine tests
IS 2705 part 1-4 2007, IEC6189-2 2012, IS 3156 2007,IEC 61869-5 2011, IEC 61869-3
2878ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
DIRECTIONAL RELAYS AND POWER RELAYS Operation and Accuracy IEC 60255-12.1980 IS/IEC60255 -Part 12,
2879ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
DIRECTIONAL RELAYS AND POWER RELAYS Operation and Accuracy IEC 60255-12.1980 IS/IEC60255 -Part 12
2880ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
DIRECTIONAL RELAYS AND POWER RELAYS Operation and Accuracy IEC 60255-12.1980 IS/IEC60255 -Part 12,
2881ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
DIRECTIONAL RELAYS AND POWER RELAYS Operation and Accuracy IEC 60255-12.1980 IS/IEC60255 -Part 12,
2882ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
DIRECTIONAL RELAYS AND POWER RELAYS Operation and Accuracy IEC 60255-12.1980 IS/IEC60255 -Part 12,
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 255 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2883ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Disconnectors Switch disconnector & fuse combinationunits
Electrical durability Electrical &Mechanical endurance
IS/IEC 60947 part 1 2012 &part 3 2013, IEC 60947 part 12014-09 & part 3
2884ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Electrical Accessories-circuit breakers for over currentprotection for household and similar installations Circuitbreakers for equipment(CBE
Short circuit capacityIS/IEC 60898-1: 2015 IS/IEC60898-2: 2003 (RA : 2017) IEC60898-1 : 2015 IEC 60898-2:2016 IEC 60934 :
2885ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Electrical Accessories-circuit breakers for over currentprotection for household and similar installations Circuitbreakers for equipment(CBE)
Dielectric propertiesIS/IEC 60898-1: 2015 IS/IEC60898-2: 2003 (RA : 2017) IEC60898-1 : 2015 IEC 60898-2:2016 IEC 60934
2886ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Electrical Accessories-circuit breakers for over currentprotection for household and similar installations Circuitbreakers for equipment(CBE)
Temperature riseIS/IEC 60898-1: 2015 IS/IEC60898-2: 2003 (RA : 2017) IEC60898-1 : 2015 IEC 60898-2:2016 IEC 60934
2887ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Electrical Accessories-circuit breakers for over currentprotection for household and similar installations Circuitbreakers for equipment(CBE)
Tripping characteristicsMechanical and electricalendurance
IS/IEC 60898-1: 2015 IS/IEC60898-2: 2003 (RA : 2017) IEC60898-1 : 2015 IEC 60898-2:2016 IEC 60934 :
2888ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Electrical Accessories-circuit breakers for over currentprotection for household and similar installations Circuitbreakers for equipment(CBE)
Non-interchangeabilityIndelibility of markingReliability of screws, currentcarrying parts and connections
IS/IEC 60898-1: 2015 IS/IEC60898-2: 2003 (RA : 2017) IEC60898-1 : 2015 IEC 60898-2:2016 IEC 60934
2889ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Electrical Accessories-circuit breakers for over currentprotection for household and similar installations Circuitbreakers for equipment(CBE)
Reliability of terminals forexternal conductors
IS/IEC 60898-1: 2015 IS/IEC60898-2: 2003 (RA : 2017) IEC60898-1 : 2015 IEC 60898-2:2016 IEC 60934
2890ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Electrical Accessories-circuit breakers for over currentprotection for household and similar installations Circuitbreakers for equipment(CBE)
Protection against electricshock
IS/IEC 60898-1: 2015 IS/IEC60898-2: 2003 (RA : 2017) IEC60898-1 : 2015 IEC 60898-2:2016 IEC 60934
2891ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Electrical Accessories-circuit breakers for over currentprotection for household and similar installations Circuitbreakers for equipment(CBE)
Resistance to abnormal heatand to fire
IS/IEC 60898-1: 2015 IS/IEC60898-2: 2003 (RA : 2017) IEC60898-1 : 2015 IEC 60898-2:2016 IEC 60934
2892ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Electrical Accessories-circuit breakers for over currentprotection for household and similar installations Circuitbreakers for equipment(CBE)
Resistance to heatIS/IEC 60898-1: 2015 IS/IEC60898-2: 2003 (RA : 2017) IEC60898-1 : 2015 IEC 60898-2:2016 IEC 60934
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 256 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2893ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Electrical Accessories-circuit breakers for over currentprotection for household and similar installations Circuitbreakers for equipment(CBE)
Resistance to mechanicalshock and impact
IS/IEC 60898-1: 2015 IS/IEC60898-2: 2003 (RA : 2017) IEC60898-1 : 2015 IEC 60898-2:2016 IEC 60934
2894ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Electrical Accessories-circuit breakers for over currentprotection for household and similar installations Circuitbreakers for equipment(CBE)
Resistance to rustingIS/IEC 60898-1: 2015 IS/IEC60898-2: 2003 (RA : 2017) IEC60898-1 : 2015 IEC 60898-2:2016 IEC 60934
2895ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Electrical Accessories-circuit breakers for over currentprotection for household and similar installations Circuitbreakers for equipment(CBE)
Clearance & creepagedistances
IS/IEC 60898-1: 2015 IS/IEC60898-2: 2003 (RA : 2017) IEC60898-1 : 2015 IEC 60898-2:2016 IEC 60934
2896ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Electrical Accessories-circuit breakers for over currentprotection for household and similar installations Circuitbreakers for equipment(CBE)
Marking General MechanismIS/IEC 60898-1: 2015 IS/IEC60898-2: 2003 (RA : 2017) IEC60898-1 : 2015 IEC 60898-2:2016 IEC 60934
2897ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
ELECTRICAL TIMER RELAYS FOR INDUSTRIAL PURPOSE PartIII: Electronic
Verification of Limits ofOperation Verification ofResetting time SettingAccuracy test Repeat Accuracytest
IS 5834,(Part III)-1981Amendment 1994 Reaffirmed
2898ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
ELECTRICAL TIMER RELAYS FOR INDUSTRIAL PURPOSE PartIII: Electronic
Verification of Limits ofOperation Verification ofResetting time SettingAccuracy test Repeat Accuracytest
IS 5834,(Part III)-1981Amendment 1994 Reaffirmed
2899ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Electromechanical elementary relays Functional tests IEC 61810-7
2900ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Electromechanical elementary relays Functional tests IEC 61810-7,
2901ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
End Products & Materials Glow wire flammability test
IS 11000 (Part 2/Sec 1): 2018IEC 60695-2-10-2013 IEC60695-2-11-2014RLV IS 11000(Part 2/Sec 1): 2018 IEC60695-2-12-
2902ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Fault passage indicator Short time current test IEEE 495
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 257 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2903ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
H.V Switchgear & Controlgear Part 1: Commonspecifications High Voltage ac circuit breaker AlternatingCurrent disconnectors and earthing switches AC Switchfuse combination A.C. Metal enclosed Switchgearcontrolgear for rated voltage above 1kV and upto andincluding 52kV
Resistance Measurement
IEC 62271-1 2017, IEC62271-100 2017, IEC62271-102 2013, IEC62271-111 2012, IEC62271-105 2012, IEC62271-200
2904ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
H.V Switchgear & Controlgear Part 1: Commonspecifications High Voltage ac circuit breaker AlternatingCurrent disconnectors and earthing switches AC Switchfuse combination A.C. Metal enclosed Switchgearcontrolgear for rated voltage above 1kV and upto andincluding 52kV
Temperature Rise Test
IEC 62271- 2017, IEC62271-102 2013, IEC62271-111 2012, IEC62271-105 2012, IEC62271-200
2905ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
H.V Switchgear & Controlgear Part 1: Commonspecifications High Voltage ac circuit breaker AlternatingCurrent disconnectors and earthing switches AC Switchfuse combination A.C. Metal enclosed Switchgearcontrolgear for rated voltage above 1kV and upto andincluding 52kV
Temperature Rise Test
IS/IEC 62271-1 2017 (RA2013), IS/IEC 62271-100 2008(RA 2017), IS/IEC 62271-1022003 (RA 2013), IS/IEC62271-105 2002 (RA 2013),IS/IEC 62271-111 2012, IS/IEC62271-200
2906ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
High voltage alternating current circuit breakers Short time current test IEC 62271-100 : 2012-09 IS13118: 1991 (RA
2907ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
High Voltage Circuit BreakersBasic Short circuit test dutiesand short line fault tests -Direct test facility - Synthetictest facility
IS/IEC 62271-100: 2008(Reaffirmed 2017), IEC62271-100-2017 ,IEC 62271 –101
2908ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
High Voltage Fuses Breaking capacity testsIS 9385 Part-1/2/3/4/51979/80/80/83/83 (Reaffirmed2007) IEC 60282 – 1& 2
2909ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
High Voltage fuses - Current limiting fuses High voltagefuses - Expulsion and similar fuses Temperature Rise Test IEC 60282-1 2014, IEC 60282-2
2910ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
High Voltage fuses - Current limiting fuses High voltagefuses - Expulsion and similar fuses Temperature Rise Test IEC 60282-1 2014, IEC 60282-2
2911ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
High Voltage Switch Boards Terminal Boxes M.V metalenclosed switchgear Arcing due to Internal faults
IEC 62271-1 2017IEC-62271-202:2014IEC-62271-200:2011 ANSI/IEEEC37.20.7
2912ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
High Voltage Switch Boards Terminal Boxes M.V metalenclosed switchgear Arcing due to Internal faults
IEC 62271-1 2017IEC-62271-202:2014IEC-62271-200:2011 ANSI/IEEEC37.20.7
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 258 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2913ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
High Voltage Switch Boards Terminal Boxes M.V metalenclosed switchgear Arcing due to Internal faults IEC 62271-12011-08, ANSI/
IEEE C37.20.7.2001, IEC-61330
2914ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
High Voltage Switches Line/Cable charging currentswitching tests
IS/IEC 62271-103: 2011(RA2015), IEC 62271 –103
2915ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
High Voltage Switches Line/Cable charging currentswitching tests
IS/IEC 62271-103: 2011(RA2015), IEC 62271 –103
2916ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
High Voltage Switches Line/Cable charging currentswitching tests
IS/IEC 62271-103: 2011(RA2015), IEC 62271 –103
2917ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
High Voltage Switches Line/Cable charging currentswitching tests
IS/IEC 62271-103: 2011(RA2015),IEC 62271 –103
2918ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
High Voltage Switches Short circuit making test IS/IEC 62271-103: 2011(RA2015) , IEC 62271 –103
2919ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
High Voltage Switches Short circuit making test IS/IEC 62271-103: 2011(RA2015), IEC 62271 –103
2920ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
High Voltage Switches Short circuit making test IS/IEC 62271-103: 2011(RA2015), IEC 62271 –103
2921ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
High Voltage Switches Short circuit making test IS/IEC 62271-103: 2011(RA2015), IEC 62271 –103
2922ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
High Voltage Switches Short circuit making test IS/IEC 62271-103: 2011(RA2015), IEC 62271 –103
2923ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
High Voltage Switches Short time current testIS/IEC 62271-103: 2011(RA2015), IEC 62271 –103: 2011ANSI/IEEE C37:30.1,1a,52011/2017
2924ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
High Voltage Switches Short time current testIS/IEC 62271-103: 2011(RA2015), IEC 62271 –103: 2011ANSI/IEEE C37:30.1,1a,52011:2017
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 259 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2925ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
High Voltage Switches Short time current testIS 9920-Part1-2002(Reaffirmed 2007) IEC 62271–103: 2011 ANSI/IEEE C37:30(1997),C37:32(1996),C37:34
2926ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
High Voltage Switches Short time current testIS/IEC 62271-103: 2011(RA2015), IEC 62271 –103: 2011ANSI/IEEE C37:30.1,1a,52011/2017
2927ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
High Voltage Switches Short time current testIS/IEC 62271-103: 2011(RA2015), IEC 62271 –103: 2011ANSI/IEEE C37:30.1,1a,52011/2017
2928ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
High Voltage Switches Single capacitor bank currentswitching tests
IS/IEC 62271-103: 2011(RA2015) ,IEC 62271 –103
2929ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
High Voltage Switches Single capacitor bank currentswitching tests
IS/IEC 62271-103: 2011(RA2015), IEC 62271 –103
2930ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
High Voltage Switches Single capacitor bank currentswitching tests
IS/IEC 62271-103: 2011(RA2015), IEC 62271 –103
2931ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
High Voltage Switches Single capacitor bank currentswitching tests
IS/IEC 62271-103: 2011(RA2015), IEC 62271 –103
2932ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
High Voltage Switches Single capacitor bank currentswitching tests
IS/IEC 62271-103: 2011(RA2015), IEC 62271 –103
2933ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
High Voltage Switches Single capacitor bank currentswitching tests
IS/IEC 62271-103: 2011(RA2015), IEC 62271 –103
2934ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
High Voltage Switches Single capacitor bank currentswitching tests
IS/IEC 62271-103: 2011(RA2015), IEC 62271 –103
2935ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
High Voltage Switches Single capacitor bank currentswitching tests
IS/IEC 62271-103: 2011(RA2015), IEC 62271 –103
2936ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
High Voltage Switches Single capacitor bank currentswitching tests
IS/IEC 62271-103: 2011(RA2015), IEC 62271 –103
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 260 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2937ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
High Voltage Switches Single capacitor bank currentswitching tests
IS/IEC 62271-103: 2011(RA2015), IEC 62271 –103
2938ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
High Voltage SwitchesTransformer OFF Load currentbreaking/motor switchingcurrent breaking tests
IS/IEC 62271-103: 2011(RA2015), IEC 62271 –103
2939ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
High Voltage SwitchesTransformer OFF Load currentbreaking/motor switchingcurrent breaking tests
IS/IEC 62271-103: 2011(RA2015),IEC 62271 –103
2940ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
High Voltage SwitchesTransformer OFF Load currentbreaking/motor switchingcurrent breaking tests
IS 9920-Part1-2002(Reaffirmed 2007) IEC 62271–103
2941ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
High-voltage/low-voltage prefabricated sub-station Short time current test IEC 62271-202
2942ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
IEEE Standard for Metal-Clad and Station-Type CubicleSwitchgear Temperature Rise Test IEEE-C.37.20.2 2015, IEEE-
C.37.23
2943ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Intelligent Electronic device (IED) for conformance to IEC61850 standard Conformance Testing on IEDs
UCA IuG Test Procedures &releavent IEC61850 -10 :2012Ed.2 and series referred in theTest procedure.
2944ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Intelligent Electronic device (IED) for conformance to IEC61850 standard Conformance Testing on IEDs
UCA IuG Test Procedures &relevant IEC 61850-10 :2012Ed.2 and series referred in theTest procedure
2945ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Inter connection busbar for ac voltage above 1 kV up to &including 36 kV Short time current test IS 8084
2946ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Inter connection busbar for ac voltage above 1 kV up to &including 36 Kv Short time current test IS 8084
2947ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Inter connection busbar for ac voltage above 1 kV up to &including 36 kV
Short TIme Current Test,Protection against electricshock and integrity ofprotective circuits
IS 8084 : 1976 (RA
2948ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
L.V. Switchgear and controlgear L.V. Switchgear andcontrolgear - Circuit Breakers Low voltage switchgear &controlgear -Switches, Disconnector, Switch Disconnectors& Fuse Combination units
Temperature Rise Test IEC 60947-1 2014, IEC 60947-22013, IEC 60947-3
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 261 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2949ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
L.V. Switchgear and controlgear L.V. Switchgear andcontrolgear - Circuit Breakers Low voltage switchgear &controlgear -Switches, Disconnector, Switch Disconnectors& Fuse Combination units
Temperature Rise Test IEC 60974-1 2014, IEC 60974-22013, IEC 60947-3
2950ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Low voltage fuses for voltages not exceeding 1000 V a.c. or1500 V d.c D-type fuses Low voltage fuses Cartridge fusesfor voltage upto and including 1000 V a.c. and 1500 V d.c.Miniature fuses carriers & bases used in rewirable typeelectrical fuses for voltages upto 650 V
Temperature rise Poweracceptance
IS 13703 : 1993 (RA 2014) IS8187 : 1976 (RA 2016) IEC60269-1 : 2014-06 BS 88: 1988IEC 60127-1 :
2951ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Low voltage fuses for voltages not exceeding 1000 V a.c. or1500 V d.c Short circuit breaking capacity IS 13703 : 1993 (RA
2952ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Low Voltage Fuses For Voltages Not Exceeding 1000V ACOr 1500V DC Temperature Rise Test IS 13703-1 1993 (RA
2953ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Low voltage switch gear and control gear assemblyResistance to UV radiation,flexural strength, charpyimpact strength
ISO 4892-2:2013, ISO178:2019, ISO 179-1:2010, IEC61439-1:2011, IEC 61439-2:
2954ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Low voltage switch gear and control-gear assemblies Short Time Current Test IS 8623 part 2/3: 1993/1993(Reaffirmed 2018/
2955ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Low voltage Switchgear & Control gear assembly Resistance to CorrosionIEC 60068-2-30 2005, IEC60068-2-11-1981, IEC61439-1-2011, IEC 61439-2
2956ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Low voltage switchgear & controlgear Control circuitdevices & switching elements Low voltage switchgear &controlgear assemblies
Impulse voltage test
IS/IEC 60947 (Part 1: 2007 RA:2017 & Part 5-1 :2009 RA:2018) IEC 60947 (Part1:2014-09 & Part 5:2016) IS8623 (1-3):1993 (RA 2018) IEC60439-1 : 2004 IEC 60439-2 :2005 IEC 61439-1 : 2011, IS16636 : 2017, IEC 61921
2957ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Low voltage switchgear & controlgear Control circuitdevices & switching elements Low voltage fuses forvoltages not exceeding 1000 V a.c. or 1500 V d.c. Voltagetransformer Current transformer Instrument transformerElectrical power connectors 11 kV Horn gap fuse
Temperature rise testIS 13703 (Part 1 to 4) : 1993(RA 2014) IEC 60269-1 : 2009(Part 1 to Part 4)
2958ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Low voltage switchgear & controlgear Control circuitdevices & switching elements Low voltage fuses forvoltages not exceeding 1000 V a.c. or 1500 V d.c. Voltagetransformer Current transformer Instrument transformerElectrical power connectors 11 kV Horn gap fuse
Temperature rise testIS 13703 (Part 1 to 4) : 1993(RA 2014) IEC 60269-1 : 2009(Part 1 to Part 4)
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 262 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2959ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Low voltage switchgear & controlgear Control circuitdevices & switching elements Low voltage fuses forvoltages not exceeding 1000 V a.c. or 1500 V d.c.
Temperature rise test
IS/IEC 60947 (Part 1: 2007 RA:2017 & Part 5-1 :2009 (RA :2018) IEC 60947 (Part1:2014-09 & Part 5:2016) IS13703 (Part 1, 2 & 4) : 1993(RA 2014) IEC 60269-1
2960ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Low voltage switchgear & controlgear assemblies Impulse voltage testIS 8623:1993 (RA 2013) IEC60439-1 : 2004 IEC 60439-2 :2005 IEC 61439-1
2961ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Low voltage switchgear & controlgear assemblies Internal arc test IEC/TR 61641
2962ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Low voltage switchgear & controlgear assemblies Short time current test
IS 8623-1 : 1993 (RA: 2018)IEC 61439-1 : 2011 IEC61439-2 : 2011 IEC 61439-6:2012, IS 16636 : 2017, IEC61921
2963ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Low voltage switchgear & controlgear assemblies Short time current tests,IS 8623:1993 (RA 2013) IEC60439-1 : 2004 IEC 60439-2 :2005 IEC 61439-1
2964ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Low voltage switchgear and control-gear assemblies Short Time Current TestIS 8623 part 2/3: 1993/1993(Reaffirmed 2018/2018),IS/IEC61439-1/ 2 -2011/2011, IEC61439-1- 2011 IEC 61439-2
2965ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Low-voltage fuses Resistance to heat & fire IEC 60269-1 : 2006 IS 13703 :1993 (RA
2966ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Low-voltage switchgear and controlgear assemblies Ability to withstand mechanicalloads IEC 61439-6
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 263 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2967ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Low-voltage switchgear and controlgear assemblies Clearance and creepagedistances Lifting Marking
IEC 61439-1:2011 IEC61439-6:2012 IEC60664-1:2007 IEC61180-1:2016 IEC61180-2:2016 IEC60068-2-30:2005 IEC60068-2-11:1981 ISO4628-3:2003 IEC60068-2-2:2007 IEC60695-2-10:2013 IEC60695-2-11:2014 IEC62262:2002 IEC60068-2-75:2014 IEC62271-200:2011 IEC 61439-6:2012 , IS 16636 : 2017, IEC61921
2968ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Low-voltage switchgear and controlgear assemblies Dielectric properties
IEC 61439-1:2011 IEC61439-6:2012 IEC60664-1:2007 IEC61180-1:2016 IEC61180-2:2016 IEC60068-2-30:2005 IEC60068-2-11:1981 ISO4628-3:2003 IEC60068-2-2:2007 IEC60695-2-10:2013 IEC60695-2-11:2014 IEC62262:2002 IEC60068-2-75:2014 IEC62271-200:2011 IEC 61439-6:2012, IS 16636 : 2017, IEC61921
2969ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Low-voltage switchgear and controlgear assemblies Mechanical impact Ability towithstand mechanical loads
IEC 62271-200:2011 IEC61439-6
2970ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Low-voltage switchgear and controlgear assemblies Properties of insulatingmaterials
IEC 60695-2-10:2013 IEC60695-2-11
2971ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Low-voltage switchgear and controlgear assemblies Resistance to corrosionIEC 60068-2-30:2005 IEC60068-2-11:1981 ISO4628-3:2003 IEC 60068-2-2:
2972ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Low-Voltage Switchgear and controlgear assemblies Temperature Rise Test IS 8623-1 1993 (RA
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 264 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2973ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Low-Voltage Switchgear and controlgear assemblies -Busbar Trunking systems Temperature Rise Test IS 8623-2 1993 RA
2974ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Low-voltage switchgear and controlgear assemblies - Part1: General rules Part 2: Power switchgear and controlgearassemblies Part 3: Distribution Boards Intended to beOperated by Ordinary Persons (DBO) Part6: Busbar trunkingsystems (Busways)
Temperature Rise TestIEC 61439-1 2011, IEC 61439-22011, IEC 61439-3 2012, IEC61439-6
2975ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
LV Rewirable fuses Electrical durability Electrical &Mechanical endurance IS:2086 : 1993 (RA
2976ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
M.V Distribution Fuse boards Temperature Rise Test ESI Std 37-2
2977ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
M.V Distribution Fuse boards Temperature Rise Test ESI Std 37-2
2978ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Measuring relays and protection equipment -Part 118-1:Synchrophasor for power systems- Measurements
Measurement compliance testand evaluation - Dynamiccompliance Performanceduring ramp of systemfrequency
IEC/IEEE 60255-118-1:
2979ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Measuring relays and protection equipment -Part118-1:Synchrophasor for power systems- Measurements
Measurement compliance testand evaluation - Dynamiccompliance Performance understep changes in phase andmagnitude
IEC/IEEE 60255-118-1
2980ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Measuring relays and protection equipment -Part118-1:Synchrophasor for power systems- Measurements
Measurement compliance testand evaluation - Reference andtest conditions
IEC/IEEE 60255-118-1
2981ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Measuring relays and protection equipment -Part118-1:Synchrophasor for power systems- Measurements
Measurement compliance testand evaluation - Steady-statecompliance a.Signal frequencyb.Voltage signal magnitudec.Current signal magnituded.Harmonic Distortion (SingleHarmonic) e.Out-of-bandinterference
IEC/IEEE 60255-118-1:
2982ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Measuring relays and protection equipment -Part118-1:Synchrophasor for power systems- Measurements
Measurement compliance testand evaluation - Testingconsiderations
IEC/IEEE 60255-118-1:
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 265 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2983ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Measuring relays and protection equipment -Part118-1:Synchrophasor for power systems- Measurements
Measurement compliance testand evaluation -Dynamiccompliance MeasurementBandwidth
IEC/IEEE 60255-118-1
2984ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Measuring relays and protection equipment -Part118-1:Synchrophasor for power systems- Measurements
Measurement compliance testand evaluation -PMU reportinglatency compliance
IEC/IEEE 60255-118-1
2985ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements
1.0 Contact performance 1.1)Mechanical endurance 1.2)Limited making capacity 1.3)Contact current 1.4) Limitedbreaking capacity
IEC 60255-1, 2009 IS/IEC60255:Part 1:2009
2986ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements
1.0) Burden Tests 1.1) Burdenfor voltage transformers 1.2)Burden for Currenttransformers 1.3) Burden forAC power supply 1.3.1)Quiescent state burden 1.3.2)Maximum load 1.4) Burden forDC power supply 1.4.1)Quiescent state burden 1.4.2)Maximum load 1.5) Burden forBinary input
IEC 60255-1, 2009 IS/IEC60255:Part 1
2987ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements
1.0) Burden Tests 1.1) Burdenfor voltage transformers 1.2)Burden for Currenttransformers 1.3) Burden forAC power supply 1.3.1)Quiescent state burden 1.3.2)Maximum load 1.4) Burden forDC power supply 1.4.1)Quiescent state burden 1.4.2)Maximum load 1.5) Burden forBinary input
IEC 60255-1, 2009 IS/IEC60255:Part 1
2988ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements
1.0) Burden Tests 1.1) Burdenfor voltage transformers 1.2)Burden for Currenttransformers 1.3) Burden forAC power supply 1.3.1)Quiescent state burden 1.3.2)Maximum load 1.4) Burden forDC power supply 1.4.1)Quiescent state burden 1.4.2)Maximum load 1.5) Burden forBinary input
IEC 60255-1, 2009 IS/IEC60255:Part 1
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 266 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2989ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements
1.0) Burden Tests 1.1) Burdenfor voltage transformers 1.2)Burden for Currenttransformers 1.3) Burden forAC power supply 1.3.1)Quiescent state burden 1.3.2)Maximum load 1.4) Burden forDC power supply 1.4.1)Quiescent state burden 1.4.2)Maximum load 1.5) Burden forBinary input
IEC 60255-1, 2009 IS/IEC60255:Part 1:2009
2990ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements
1.0) Burden Tests 1.1) Burdenfor voltage transformers 1.2)Burden for Currenttransformers 1.3) Burden forAC power supply 1.3.1)Quiescent state burden 1.3.2)Maximum load 1.4) Burden forDC power supply 1.4.1)Quiescent state burden 1.4.2)Maximum load 1.5) Burden forBinary input
IEC 60255-1, 2009 IS/IEC60255:Part 1:2009
2991ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Dielectric type test IEC 60255-1, 2009 IS/IEC
60255:Part 1:2009
2992ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Dielectric type test IEC 60255-1, 2009 IS/IEC
60255:Part 1:2009
2993ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements
Measurement of insulationresistance
IEC 60255-1, 2009 IS/IEC60255:Part 1:2009
2994ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements
Measurement of insulationresistance
IEC 60255-1, 2009 IS/IEC60255:Part 1:2009
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 267 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2995ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part121: Functional requirements for Distance Protection
1) Functional tests 1.1) General1.2) Rated frequencycharacteristic accuracy tests1.2.1 General 1.2.2) Basiccharacteristic accuracy understeady state conditions 1.2.3)Basic directional accuracyunder steady state conditions1.2.4) Determination ofaccuracy related to time delaysetting 1.2.5) Determinationand reporting of thedisengaging time
IEC 60255-121
2996ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part121: Functional requirements for Distance Protection
1) Functional tests 1.1) General1.2) Rated frequencycharacteristic accuracy tests1.2.1 General 1.2.2) Basiccharacteristic accuracy understeady state conditions 1.2.3)Basic directional accuracyunder steady state conditions1.2.4) Determination ofaccuracy related to time delaysetting 1.2.5) Determinationand reporting of thedisengaging time
IEC 60255-121
2997ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part121: Functional requirements for Distance Protection
1) Functional tests 1.1) General1.2) Rated frequencycharacteristic accuracy tests1.2.1 General 1.2.2) Basiccharacteristic accuracy understeady state conditions 1.2.3)Basic directional accuracyunder steady state conditions1.2.4) Determination ofaccuracy related to time delaysetting 1.2.5) Determinationand reporting of thedisengaging time
IEC 60255-121
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 268 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
2998ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part121: Functional requirements for Distance Protection
1) Functional tests 1.1) General1.2) Rated frequencycharacteristic accuracy tests1.2.1 General 1.2.2) Basiccharacteristic accuracy understeady state conditions 1.2.3)Basic directional accuracyunder steady state conditions1.2.4) Determination ofaccuracy related to time delaysetting 1.2.5) Determinationand reporting of thedisengaging time
IEC 60255-121
2999ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part121: Functional requirements for Distance Protection
1.3) Dynamic performance1.3.1) General 1.3.2 Dynamicperformance: operate time andtransient overreach (SIRdiagrams) 1.3.3) Dynamicperformance: operate time andtransient overreach (CVT-SIRdiagrams) 1.3.4) Dynamicperformance: transientoverreach tests 1.3.5) Dynamicperformance: typical operatetime
IEC 60255-121
3000ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part121: Functional requirements for Distance Protection
1.3) Dynamic performance1.3.1) General 1.3.2 Dynamicperformance: operate time andtransient overreach (SIRdiagrams) 1.3.3) Dynamicperformance: operate time andtransient overreach (CVT-SIRdiagrams) 1.3.4) Dynamicperformance: transientoverreach tests 1.3.5) Dynamicperformance: typical operatetime
IEC 60255-121
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 269 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
3001ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part121: Functional requirements for Distance Protection
1.3) Dynamic performance1.3.1) General 1.3.2 Dynamicperformance: operate time andtransient overreach (SIRdiagrams) 1.3.3) Dynamicperformance: operate time andtransient overreach (CVT-SIRdiagrams) 1.3.4) Dynamicperformance: transientoverreach tests 1.3.5) Dynamicperformance: typical operatetime
IEC 60255-121
3002ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part121: Functional requirements for Distance Protection
1.3) Dynamic performance1.3.1) General 1.3.2 Dynamicperformance: operate time andtransient overreach (SIRdiagrams) 1.3.3) Dynamicperformance: operate time andtransient overreach (CVT-SIRdiagrams) 1.3.4) Dynamicperformance: transientoverreach tests 1.3.5) Dynamicperformance: typical operatetime
IEC 60255-121
3003ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part121: Functional requirements for Distance Protection
1.3) Dynamic performance1.3.1) General 1.3.2 Dynamicperformance: operate time andtransient overreach (SIRdiagrams) 1.3.3) Dynamicperformance: operate time andtransient overreach (CVT-SIRdiagrams) 1.3.4) Dynamicperformance: transientoverreach tests 1.3.5) Dynamicperformance: typical operatetime
IEC 60255-121
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 270 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
3004ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part121: Functional requirements for Distance Protection
1.4) Performance withharmonics 1.4.1) Steady stateharmonics tests 1.4.2)Transient oscillation tests(network simulation L-C) 1.5)Performance during off-nominal frequency 1.5.1)Steady state frequencydeviation tests 1.5.2) Transientfrequency deviation tests 1.6)Double infeed tests 1.6.1)Double infeed tests for singleline 1.6.2) Double infeed testsparallel lines (without mutualinductance) 1.6.3) Reporting ofdouble infeed tests results
IEC 60255-121
3005ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part121: Functional requirements for Distance Protection
1.4) Performance withharmonics 1.4.1) Steady stateharmonics tests 1.4.2)Transient oscillation tests(network simulation L-C) 1.5)Performance during off-nominal frequency 1.5.1)Steady state frequencydeviation tests 1.5.2) Transientfrequency deviation tests 1.6)Double infeed tests 1.6.1)Double infeed tests for singleline 1.6.2) Double infeed testsparallel lines (without mutualinductance) 1.6.3) Reporting ofdouble infeed tests results
IEC 60255-121
3006ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part121: Functional requirements for Distance Protection
1.4) Performance withharmonics 1.4.1) Steady stateharmonics tests 1.4.2)Transient oscillation tests(network simulation L-C) 1.5)Performance during off-nominal frequency 1.5.1)Steady state frequencydeviation tests 1.5.2) Transientfrequency deviation tests 1.6)Double infeed tests 1.6.1)Double infeed tests for singleline 1.6.2) Double infeed testsparallel lines (without mutualinductance) 1.6.3) Reporting ofdouble infeed tests results
IEC 60255-121
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 271 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
3007ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part121: Functional requirements for Distance Protection
1.4) Performance withharmonics 1.4.1) Steady stateharmonics tests 1.4.2)Transient oscillation tests(network simulation L-C) 1.5)Performance during off-nominal frequency 1.5.1)Steady state frequencydeviation tests 1.5.2) Transientfrequency deviation tests 1.6)Double infeed tests 1.6.1)Double infeed tests for singleline 1.6.2) Double infeed testsparallel lines (without mutualinductance) 1.6.3) Reporting ofdouble infeed tests results
IEC 60255-121
3008ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part121: Functional requirements for Distance Protection
1) Functional tests 1.1) General1.2) Rated frequencycharacteristic accuracy tests1.2.1 General 1.2.2) Basiccharacteristic accuracy understeady state conditions 1.2.3)Basic directional accuracyunder steady state conditions1.2.4) Determination ofaccuracy related to time delaysetting 1.2.5) Determinationand reporting of thedisengaging time
IEC 60255-121
3009ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part121: Functional requirements for Distance Protection
1) Functional tests 1.1) General1.2) Rated frequencycharacteristic accuracy tests1.2.1 General 1.2.2) Basiccharacteristic accuracy understeady state conditions 1.2.3)Basic directional accuracyunder steady state conditions1.2.4) Determination ofaccuracy related to time delaysetting 1.2.5) Determinationand reporting of thedisengaging time
IEC 60255-121
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 272 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
3010ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part121: Functional requirements for Distance Protection
1.3) Dynamic performance1.3.1) General 1.3.2 Dynamicperformance: operate time andtransient overreach (SIRdiagrams) 1.3.3) Dynamicperformance: operate time andtransient overreach (CVT-SIRdiagrams) 1.3.4) Dynamicperformance: transientoverreach tests 1.3.5) Dynamicperformance: typical operatetime
IEC 60255-121
3011ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part121: Functional requirements for Distance Protection
1.4) Performance withharmonics 1.4.1) Steady stateharmonics tests 1.4.2)Transient oscillation tests(network simulation L-C) 1.5)Performance during off-nominal frequency 1.5.1)Steady state frequencydeviation tests 1.5.2) Transientfrequency deviation tests 1.6)Double infeed tests 1.6.1)Double infeed tests for singleline 1.6.2) Double infeed testsparallel lines (without mutualinductance) 1.6.3) Reporting ofdouble infeed tests results
IEC 60255-121,
3012ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part121: Functional requirements for Distance Protection
1.4) Performance withharmonics 1.4.1) Steady stateharmonics tests 1.4.2)Transient oscillation tests(network simulation L-C) 1.5)Performance during off-nominal frequency 1.5.1)Steady state frequencydeviation tests 1.5.2) Transientfrequency deviation tests 1.6)Double infeed tests 1.6.1)Double infeed tests for singleline 1.6.2) Double infeed testsparallel lines (without mutualinductance) 1.6.3) Reporting ofdouble infeed tests results
IEC 60255-121
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 273 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
3013ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part127: Functional requirements for Over/under Voltageprotection
1.0)Determination of steadystate errors relating to thecharacteristic quantity1.1)Accuracy ofsetting(start)value 1.2)Resetratio determination2.0)Determination of thesteady state errors related tothe start and operate time3.0)Determination of steadystate error related to the resettime 4.0)Determination oftransientperformance4.1)Transientoverreach 4.2)Overshoot timefor undervoltage protection5.0)Response to time varyingvalues of the characteristicquantity for dependent timerelay
IEC 60255-127, 2010 IS/IEC60255:Part 127
3014ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part127: Functional requirements for Over/under Voltageprotection
1.0)Determination of steadystate errors relating to thecharacteristic quantity1.1)Accuracy ofsetting(start)value 1.2)Resetratio determination2.0)Determination of thesteady state errors related tothe start and operate time3.0)Determination of steadystate error related to the resettime 4.0)Determination oftransientperformance4.1)Transientoverreach 4.2)Overshoot timefor undervoltage protection5.0)Response to time varyingvalues of the characteristicquantity for dependent timerelay
IEC 60255-127, 2010 IS/IEC60255:Part 127
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 274 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
3015ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part127: Functional requirements for Over/under Voltageprotection
1.0)Determination of steadystate errors relating to thecharacteristic quantity1.1)Accuracy ofsetting(start)value 1.2)Resetratio determination2.0)Determination of thesteady state errors related tothe start and operate time3.0)Determination of steadystate error related to the resettime 4.0)Determination oftransientperformance4.1)Transientoverreach 4.2)Overshoot timefor undervoltage protection5.0)Response to time varyingvalues of the characteristicquantity for dependent timerelay
IEC 60255-127, 2010 IS/IEC60255:Part 127
3016ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part127: Functional requirements for Over/under Voltageprotection
1.0)Determination of steadystate errors relating to thecharacteristic quantity1.1)Accuracy ofsetting(start)value 1.2)Resetratio determination2.0)Determination of thesteady state errors related tothe start and operate time3.0)Determination of steadystate error related to the resettime 4.0)Determination oftransientperformance4.1)Transientoverreach 4.2)Overshoot timefor undervoltage protection5.0)Response to time varyingvalues of the characteristicquantity for dependent timerelay
IEC 60255-127, 2010 IS/IEC60255:Part 127
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 275 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
3017ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part149: Functional requirements for Thermal Electrical Relays
1)Functional test methodology1.1)General 1.2)Determinationof steady-state errors relatedto the operating current value1.3)Determination of steady-state errors related to thecharacteristic quantity and theoperate time 1.3.1)Accuracydetermination of the cold curve1.3.2)Accuracy determinationof the hot curves
IEC 60255-149
3018ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part149: Functional requirements for Thermal Electrical Relays
1)Functional test methodology1.1)General 1.2)Determinationof steady-state errors relatedto the operating current value1.3)Determination of steady-state errors related to thecharacteristic quantity and theoperate time 1.3.1)Accuracydetermination of the cold curve1.3.2)Accuracy determinationof the hot curves
IEC 60255-149
3019ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part149: Functional requirements for Thermal Electrical Relays
1)Functional test methodology1.1)General 1.2)Determinationof steady-state errors relatedto the operating current value1.3)Determination of steady-state errors related to thecharacteristic quantity and theoperate time 1.3.1)Accuracydetermination of the cold curve1.3.2)Accuracy determinationof the hot curves
IEC 60255-149
3020ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part149: Functional requirements for Thermal Electrical Relays
1)Functional test methodology1.1)General 1.2)Determinationof steady-state errors relatedto the operating current value1.3)Determination of steady-state errors related to thecharacteristic quantity and theoperate time 1.3.1)Accuracydetermination of the cold curve1.3.2)Accuracy determinationof the hot curves
IEC 60255-149
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 276 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
3021ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part149: Functional requirements for Thermal Electrical Relays
1)Functional test methodology1.1)General 1.2)Determinationof steady-state errors relatedto the operating current value1.3)Determination of steady-state errors related to thecharacteristic quantity and theoperate time 1.3.1)Accuracydetermination of the cold curve1.3.2)Accuracy determinationof the hot curves
IEC 60255-149
3022ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part151: Functional requirements for Over/under currentprotection
1.0) Determination of steadystate errors relating to thecharacteristic quantity 1.1)Accuracy of setting (start)value 1.2) Reset ratiodetermination 2.0)Determination of the steadystate errors related to the startand operate time 3.0)Determination of steady stateerror related to the reset time4.0) Determination of transientperformance 5.0) Response totime varying values of thecharacteristic quantity fordependent time relay
IEC 60255-151, 2009 IS/IEC:60255-151
3023ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part151: Functional requirements for Over/under currentprotection
1.0) Determination of steadystate errors relating to thecharacteristic quantity 1.1)Accuracy of setting (start)value 1.2) Reset ratiodetermination 2.0)Determination of the steadystate errors related to the startand operate time 3.0)Determination of steady stateerror related to the reset time4.0) Determination of transientperformance 5.0) Response totime varying values of thecharacteristic quantity fordependent time relay
IEC 60255-151, 2009 IS/IEC:60255-151
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 277 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
3024ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part151: Functional requirements for Over/under currentprotection
1.0) Determination of steadystate errors relating to thecharacteristic quantity 1.1)Accuracy of setting (start)value 1.2) Reset ratiodetermination 2.0)Determination of the steadystate errors related to the startand operate time 3.0)Determination of steady stateerror related to the reset time4.0) Determination of transientperformance 5.0) Response totime varying values of thecharacteristic quantity fordependent time relay
IEC 60255-151, 2009 IS/IEC:60255-151
3025ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part151: Functional requirements for Over/under currentprotection
1.0) Determination of steadystate errors relating to thecharacteristic quantity 1.1)Accuracy of setting (start)value 1.2) Reset ratiodetermination 2.0)Determination of the steadystate errors related to the startand operate time 3.0)Determination of steady stateerror related to the reset time4.0) Determination of transientperformance 5.0) Response totime varying values of thecharacteristic quantity fordependent time relay
IEC 60255-151, 2009 IS/IEC:60255-151
3026ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part151: Functional requirements for Over/under currentprotection
1.0) Determination of steadystate errors relating to thecharacteristic quantity 1.1)Accuracy of setting (start)value 1.2) Reset ratiodetermination 2.0)Determination of the steadystate errors related to the startand operate time 3.0)Determination of steady stateerror related to the reset time4.0) Determination of transientperformance 5.0) Response totime varying values of thecharacteristic quantity fordependent time relay
IS/IEC: 60255-151
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 278 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
3027ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Contact current IS/IEC 60255:Part 1:
3028ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Contact current IS/IEC 60255:Part 1:
3029ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Contact current IS/IEC 60255:Part 1:
3030ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Contact current IS/IEC 60255:Part 1:
3031ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Contact current IS/IEC 60255:Part 1:
3032ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Contact current IS/IEC 60255:Part 1:
3033ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Contact current IS/IEC 60255:Part 1:
3034ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Contact current IS/IEC 60255:Part 1:
3035ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Contact current IS/IEC 60255:Part 1:
3036ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Contact current IS/IEC 60255:Part 1:
3037ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Contact performance IS/IEC 60255:Part 1:
3038ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Contact performance IS/IEC 60255:Part 1:
3039ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Contact performance IS/IEC 60255:Part 1:
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 279 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
3040ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Contact performance IS/IEC 60255:Part 1:
3041ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Contact performance IS/IEC 60255:Part 1:
3042ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Contact performance IS/IEC 60255:Part 1:
3043ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Contact performance IS/IEC 60255:Part 1:
3044ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Contact performance IS/IEC 60255:Part 1:
3045ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Contact performance IS/IEC 60255:Part 1:
3046ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Contact performance IS/IEC 60255:Part 1:
3047ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Limited breaking capacity IS/IEC 60255:Part 1:
3048ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Limited breaking capacity IS/IEC 60255:Part 1:
3049ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Limited breaking capacity IS/IEC 60255:Part 1:
3050ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Limited breaking capacity IS/IEC 60255:Part 1:
3051ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Limited breaking capacity IS/IEC 60255:Part 1:
3052ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Limited breaking capacity IS/IEC 60255:Part 1:
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 280 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
3053ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Limited breaking capacity IS/IEC 60255:Part 1:
3054ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Limited breaking capacity IS/IEC 60255:Part 1:
3055ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Limited breaking capacity IS/IEC 60255:Part 1:
3056ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Limited breaking capacity IS/IEC 60255:Part 1:
3057ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Limited making capacity IS/IEC 60255:Part 1
3058ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Limited making capacity IS/IEC 60255:Part 1:
3059ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Limited making capacity IS/IEC 60255:Part 1:
3060ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Limited making capacity IS/IEC 60255:Part 1:
3061ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Limited making capacity IS/IEC 60255:Part 1:
3062ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Limited making capacity IS/IEC 60255:Part 1:
3063ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Limited making capacity IS/IEC 60255:Part 1:
3064ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Limited making capacity IS/IEC 60255:Part 1:
3065ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Limited making capacity IS/IEC 60255:Part 1:
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 281 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
3066ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Limited making capacity IS/IEC 60255:Part 1:
3067ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Mechanical endurance IS/IEC 60255:Part 1:
3068ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Mechanical endurance IS/IEC 60255:Part 1:
3069ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Mechanical endurance IS/IEC 60255:Part 1:
3070ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Mechanical endurance IS/IEC 60255:Part 1:
3071ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Mechanical endurance IS/IEC 60255:Part 1:
3072ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Mechanical endurance IS/IEC 60255:Part 1:
3073ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Mechanical endurance IS/IEC 60255:Part 1:
3074ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Mechanical endurance IS/IEC 60255:Part 1:
3075ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Mechanical endurance IS/IEC 60255:Part 1:
3076ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
MEASURING RELAYS AND PROTECTION EQUIPMENTS Part 1:Common requirements Mechanical endurance IS/IEC 60255:Part 1:
3077ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Metal Enclosed Bus IEEE Standard for Metal-Clad andStation-Type Cubicle Switchgear Temperature Rise Test IEEE-C.37.23 2015, IEEE-
C.37.20.2
3078ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Metal Enclosed Bus Temperature Rise Test ANSI/IEEE C 37.23
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 282 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
3079ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Metal fittings of insulators for overhead power lines withnominal voltage greater than 1000 volts Resistance Measurement IS 2486-1 1993 (RA
3080ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Metal fittings of insulators for overhead power lines withnominal voltage greater than 1000 volts Resistance Measurement IS 2486-1 1993 (RA
3081ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Outdoor Metal-Enclosed bus ducts Resistance Measurement ANSI/IEEE C 37.23:
3082ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Outdoor Metal-Enclosed bus ducts Temperature Rise Test ANSI/IEEE C 37.23:
3083ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Part 3: Particular requirements for low-voltage switchgearand controlgear assemblies intended to be installed inplaces where unskilled persons have access for their use -Distribution boards
Temperature Rise Test IEC 60439-3
3084ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Part 3: Particular requirements for low-voltage switchgearand controlgear assemblies intended to be installed inplaces where unskilled persons have access for their use -Distribution boards
Temperature Rise Test IEC 60439-3
3085ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Prefabricated package sub-station Short time current test IEC 62271-202
3086ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
RCCB, RCBO, MCCB, MCBTesting & measurementtechniques Surge immunitytest
IEC 61000-4-5 : 2014 IS:14700:Part 4: Sec 5: 2012 RA
3087ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
RCCB, RCBO, MCCB, MCB & Others Oscillatory wave immunity test/ Ring wave test
IEC 61000-4-12:2017 IS:14700:Part 4: Sec 12: 2008 (RA
3088ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Residual current – operated circuit breakersNon-interchangeabilityIndelibility of markingReliability of screws, currentcarrying parts and connections
IS 12640 part 1 2013, IS 12640part 2 2013, IEC 60755 2008,IEC 61008-1 2013-09, IEC61008-2-1 1990, IEC 61008-2-21990, IEC 61009-1 2013, IEC61009-2-1 1991, IEC 61009-2-2
3089ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Residual current – operated circuit breakers Reliability of terminals forexternal conductors
IS 12640 part 1 2013, IS 12640part 2 2013, IEC 60755 2008,IEC 61008-1 2013-09, IEC61008-2-1 1990, IEC 61008-2-21990, IEC 61009-1 2013, IEC61009-2-1 1991, IEC 61009-2-2
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 283 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
3090ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Residual current – operated circuit breakers Clearance & creepagedistances
IS 12640 part 1 2013, IS 12640part 2 2013, IEC 60755 2008,IEC 61008-1 2013-09, IEC61008-2-1 1990, IEC 61008-2-21990, IEC 61009-1 2013, IEC61009-2-1 1991, IEC 61009-2-2
3091ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Residual current – operated circuit breakers Marking General Mechanism
IS 12640 part 1 2013, IS 12640part 2 2013, IEC 60755 2008,IEC 61008-1 2013-09, IEC61008-2-1 1990, IEC 61008-2-21990, IEC 61009-1 2013, IEC61009-2-1 1991, IEC 61009-2-2
3092ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Residual current – operated circuit breakers Protection against electricshock
IS 12640 part 1 2013, IS 12640part 2 2013, IEC 60755 2008,IEC 61008-1 2013-09, IEC61008-2-1 1990, IEC 61008-2-21990, IEC 61009-1 2013, IEC61009-2-1 1991, IEC 61009-2-2
3093ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Residual current – operated circuit breakers Resistance to abnormal heatand to fire
IS 12640 part 1 2013, IS 12640part 2 2013, IEC 60755 2008,IEC 61008-1 2013-09, IEC61008-2-1 1990, IEC 61008-2-21990, IEC 61009-1 2013, IEC61009-2-1 1991, IEC 61009-2-2
3094ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Residual current – operated circuit breakers Resistance to heat
IS 12640 part 1 2013, IS 12640part 2 2013, IEC 60755 2008,IEC 61008-1 2013-09, IEC61008-2-1 1990, IEC 61008-2-21990, IEC 61009-1 2013, IEC61009-2-1 1991, IEC 61009-2-2
3095ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Residual current – operated circuit breakers Resistance to mechanicalshock and impact
IS 12640 part 1 2013, IS 12640part 2 2013, IEC 60755 2008,IEC 61008-1 2013-09, IEC61008-2-1 1990, IEC 61008-2-21990, IEC 61009-1 2013, IEC61009-2-1 1991, IEC 61009-2-2
3096ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Residual current – operated circuit breakers Resistance to rusting
IS 12640 part 1 2013, IS 12640part 2 2013, IEC 60755 2008,IEC 61008-1 2013-09, IEC61008-2-1 1990, IEC 61008-2-21990, IEC 61009-1 2013, IEC61009-2-1 1991, IEC 61009-2-2
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 284 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
3097ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Residual current – operated circuit breakers
Behaviour of RCCBs in case offailure of the line voltage forRCCBs Limiting values of thenon-operating current underovercurrent conditions
IS/IEC 61008-1 IS 12640 : Part1 : 2016 IS 12640 : Part 2 :2016 IS/IEC 61009-1 IEC 60755: 2017 IEC 61008-1 : 2013 IEC61008-2-1 : 1990 IEC61008-2-2 : 1990 IEC 61009-1 :2013 IEC 61009-2-1 : 1991 IEC61009-2-2
3098ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Residual current – operated circuit breakers Dielectric properties
IS/IEC 61008-1 IS 12640 : Part1 : 2016 IS 12640 : Part 2 :2016 IS/IEC 61009-1 IEC 60755: 2017 IEC 61008-1 : 2013 IEC61008-2-1 : 1990 IEC61008-2-2 : 1990 IEC 61009-1 :2013 IEC 61009-2-1 : 1991 IEC61009-2-2 :
3099ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Residual current – operated circuit breakersOperating characteristicMechanical and electricalendurance
IS/IEC 61008-1 IS 12640 : Part1 : 2016 IS 12640 : Part 2 :2016 IS/IEC 61009-1 IEC 60755: 2017 IEC 61008-1 : 2013 IEC61008-2-1 : 1990 IEC61008-2-2 : 1990 IEC 61009-1 :2013 IEC 61009-2-1 : 1991 IEC61009-2-2
3100ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Residual current – operated circuit breakers Short circuit capacity
IS/IEC 61008-1 IS 12640 : Part1 : 2016 IS 12640 : Part 2 :2016 IS/IEC 61009-1 IEC 60755: 2017 IEC 61008-1 : 2013 IEC61008-2-1 : 1990 IEC61008-2-2 : 1990 IEC 61009-1 :2013 IEC 61009-2-1 : 1991 IEC61009-2-2 :
3101ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Residual current – operated circuit breakers Temperature rise
IS/IEC 61008-1 IS 12640 : Part1 : 2016 IS 12640 : Part 2 :2016 IS/IEC 61009-1 IEC 60755: 2017 IEC 61008-1 : 2013 IEC61008-2-1 : 1990 IEC61008-2-2 : 1990 IEC 61009-1 :2013 IEC 61009-2-1 : 1991 IEC61009-2-2 :
3102ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Rolling Stock equipment for Railway applications Random Vibration Test &Mechanical Shock Test IEC 61373
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 285 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
3103ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Rolling Stock equipment for Railway applications Random Vibration Test &Mechanical Shock Test IEC 61373
3104ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Switches Disconnectors Switch disconector & fusecombination units Composite units of air break switchesand rewireable type fuses for voltages not exceeding 650 Va.c.
Rated fused short circuitcurrent test
IS/IEC 60947 pt 1 2007 & pt 31999, IEC 60947 pt 3 1999, IEC60947 pt 1 2011-03 & pt 32008, IS 10027
3105ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Switches Disconnectors Switch disconector & fusecombination units Composite units of air break switchesand rewireable type fuses for voltages not exceeding 650 Va.c.
Rated fused short circuitcurrent test
IS/IEC 60947 pt 12007 & pt 31999, IEC 60947 pt 1 2011-03& pt 3 2008, IS 10027
3106ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Switches Disconnectors Switch disconector & fusecombination units
Rated making and breakingcapacity test
IS/IEC 60947 (Part 1: 2007RA:2017& Part 3 :2012RA:2018 ) IEC 60947 (Part1:2014-09 & Part 3
3107ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Switches Disconnectors Switch disconnector & fusecombination units
Dielectric-properties Degree ofprotection of enclosedequipment Routine & Samplingtests
IS/IEC 60947 (Part 1: 2007RA:2017& Part 3 :2003RA:2018 ) IEC 60947 (Part1:2014-09 & Part 3
3108ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Switches Disconnectors Switch disconnector & fusecombination units
Electrical durability Electrical &Mechanical endurance
IS/IEC 60947 (Part 1: 2007RA:2017& Part 3 :2012RA:2018 ) IEC 60947 (Part1:2014-09 & Part 3
3109ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Switches Disconnectors Switch disconnector & fusecombination units
Making and breaking capacitiesOperating limits Operationalperformance
IS/IEC 60947 (Part 1: 2007RA:2017& Part 3 :2003RA:2018 ) IEC 60947 (Part1:2014-09 & Part 3
3110ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Switches Disconnectors Switch disconnector & fusecombination units
Short circuit making &breaking capacity
IS/IEC 60947 (Part 1: 2007RA:2017& Part 3 :2003RA:2018 ) IEC 60947 (Part1:2014-09 & Part 3
3111ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Switches Disconnectors Switch disconnector & fusecombination units Short time current test
IS/IEC 60947 (Part 1: 2007RA:2017& Part 3 :2003RA:2018 ) IEC 60947 (Part1:2014-09 & Part 3
3112ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Switches Disconnectors Switch disconnector & fusecombination units Short time current test
IS/IEC 60947 (Part 1: 2007RA:2017& Part 3 :2003RA:2018 ) IEC 60947 (Part1:2014-09 & Part 3:
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 286 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
3113ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Switches Disconnectors Switch disconnector & fusecombination units Short time current test
IS/IEC 60947 (Part 1: 2007RA:2017& Part 3 :2003RA:2018 ) IEC 60947 (Part1:2014-09 & Part 3:
3114ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Switches Disconnectors Switch disconnector & fusecombination units Temperature rise
IS/IEC 60947 (Part 1: 2007RA:2017& Part 3 :2003RA:2018 ) IEC 60947 (Part1:2014-09 & Part 3
3115ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Switches Disconnectors Switch disconnector & fusecombination units
Short circuit making &breaking capacity
IS/IEC 60947 (Part 1: 2007RA:2017& Part 3 :2003RA:2018 ) IEC 60947 (Part1:2014-09 & Part 3:
3116ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Switches & switch disconnector for voltages above 1 kV &upto 33kV Short time current test
IS 9920 : Part 1 : 2002(RA2012) IEC 62271-200 : 2011IS/IEC 62271-200:2011 (RA
3117ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Switches Disconnectors Switch disconector & fusecombination units Composite units of air break switchesand rewireable type fuses for voltages not exceeding 650 Va.c.
Rated fused short circuitcurrent test
IS/IEC 60947 (Part 1: 2007 RA :2017 & Part 3 :2012 ( RA :2018) IEC 60947 (Part 1:2014CSV & Part 3:2015 CSV) IS10027
3118ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Switches Disconnectors Switch disconector & fusecombination units Composite units of air break switchesand rewireable type fuses for voltages not exceeding 650 Va.c.
Rated fused short circuitcurrent test
IS/IEC 60947 (Part 1: 2007 RA :2017 & Part 3 :2012 ( RA :2018) IEC 60947 (Part 1:2014CSV & Part 3:2015 CSV) IS10027
3119ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Switchgear and controlgear for voltages exceeding 1000 V Short time current test IS/IEC 62271-200:2011 RA :2018 IS/IEC 62271-1:2007 (RA:
3120ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Synchrophasor Measurements for Power SystemsDynamic compliance -performance under stepchange in phase andmagnitude
IEEE C37.118.1, 2011 IEEEC37.118.1a,
3121ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Synchrophasor Measurements for Power Systems Steady-state compliance-SignalMagnitude Voltage
IEEE C37.118.1, 2011 IEEEC37.118.1a,
3122ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Synchrophasor Measurements for Power Systems Dynamic compliance -Measurement Bandwidth
IEEE C37.118.1, 2011 IEEEC37.118.1a,
3123ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Synchrophasor Measurements for Power SystemsDynamic compliance-performance during ramp ofsystem frequency
IEEE C37.118.1, 2011 IEEEC37.118.1a
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 287 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
3124ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Synchrophasor Measurements for Power Systems Steady -state compliance -Outof Band Interference
IEEE C37.118.1, 2011 IEEEC37.118.1a,
3125ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Synchrophasor Measurements for Power SystemsSteady-State compliance -Harmonic Distortion (SingleHarmonic)
IEEE C37.118.1, 2011 IEEEC37.118.1a
3126ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Synchrophasor Measurements for Power Systems Steady-state compliance-Phase Angle
IEEE C37.118.1, 2011 IEEEC37.118.1a,
3127ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Synchrophasor Measurements for Power Systems Steady-state compliance-Signal Frequency Range
IEEE C37.118.1, 2011 IEEEC37.118.1a,
3128ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Synchrophasor Measurements for Power Systems Steady-state compliance-SignalMagnitude Current
IEEE C37.118.1, 2011 IEEEC37.118.1a,
3129ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Terminal blocks for copper conductors Ageing test for screwless-typeterminal blocks IEC 60947-7-1
3130ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Terminal blocks for copper conductors Dielectric test IEC 60947-7-1:
3131ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Terminal blocks for copper conductors Flexion test IEC 60947-7-1
3132ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Terminal blocks for copper conductors Pull-out test IEC 60947-7-1
3133ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Terminal blocks for copper conductors Short time withstand currenttest IEC 60947-7-1:
3134ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Terminal blocks for copper conductors Temperature-rise test IEC 60947-7-1:
3135ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Terminal blocks for copper conductors Test of mechanical strength ofclamping units IEC 60947-7-1
3136ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Terminal blocks for copper conductors Verification of clearances andcreepage distances IEC 60947-7-1
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 288 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
3137ELECTRICAL-SWITCHGEAR &PROTECTIVE EQUIPMENT
Terminal blocks for copper conductors Verification of the voltage drop IEC 60947-7-1
3138ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Bushings Thermal and Dynamic shorttime current withstand test IEC 60137
3139ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
AC dis connectors and Earth Switches Short Time current testIS/IEC 62271-102-2003(Reaffirmed 2018), IEC62271-102
3140ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
AC disconnec- tors and Earth Switches Induced current switching testIS/IEC 62271-102-2003(Reaffirmed 2018), IEC62271-102
3141ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Aluminium Conductors for Overhead Transmission PurposesPart1: Aluminium Stranded Conductor Part2: AluminiumConductors, Galvanized Steel Reinforced Part5: AluminiumConductor- Galvanized Steel Reinforced for Extra HighVoltage (400kVand above)
Temperature Rise Test andResistance Measurement
IS 398Part1: 1996 Ra-2018, IS398: Part2 1996 RA 2018,IS398 Part5 1992 RA
3142ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
American National standard for ElectricalConductors—Connectors to use between Aluminium-to-Aluminium or Aluminium-to-Copper Bare OverheadConductors
Temperature Rise Test ANSI/IEEE C 119.4
3143ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
American National standard for ElectricalConductors—Connectors to use between Aluminium-to-Aluminium or Aluminium-to-Copper Bare OverheadConductors
Temperature Rise Test ANSI/IEEE C 119.4
3144ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Arrester Disconnector Low current short-circuit test IEC 60099-4
3145ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Arrester Disconnector Time versus current curve IEC 60099-4 : 2014 IS:3070(Part 3) : 1993 (RA
3146ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Busducts, Busbars, Generator nuetral busbar compartment Short Time current testIS 8084 – 1976 (Reaffirmed2017) ANSI/IEEE C37.20.2 2015ANSI/IEEE C37.23
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 289 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
3147ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Busducts, Busbars, Generator nuetral busbar compartment Short Time current testIS 8084 – 1976 (Reaffirmed2017) ANSI/IEEE C37.20.2 2015ANSI/IEEE C37.23
3148ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Carries and bases in rewirable type electric fuses forvoltages upto 650V Temperature Rise Test IS 2086: 1993 (RA)
3149ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Conductor and earth wire accessories for over head powerlines, mid span joints and repair sleeves for conductors Resistance Measurement IS 2121 part 2 1981 RA
3150ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Conductor and earthwire accessories for overhead powerlines, mid span joints and repair sleeves for conductors Resistance Measurement IS 2121 part 2 1981 RA
3151ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Current transformer - Measuring Current transformersProtective current transformers Protective CT – SpecialPurpose
Temperature Rise TestIS 2705 part 1 2007, IS 2705part 2 2007, IS 2705 part 32007, IS 2704 part 4
3152ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Current transformer - Measuring Current transformersProtective current transformers Protective CT – SpecialPurpose
Temperature Rise TestIS 2705 part 1 2007, IS 2705part 2 2007, IS 2705 part 32007, IS 2705 part 4
3153ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Current Transformers Short Time current testIS 2705 – part 1,2/1992,1992(Reaffirmed 2017,2017) IEC61869-2: 2012 IEC 61869-1
3154ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Current Transformers Transformers Distribu-tion Trans-formers, Traction transformers, Potential transformers
Short Time current test Abilityto withstand short circuit & allroutine tests
IS 2705 part 1-4 2007, IEC61869-2 2012, IS 3156 2007,IEC 61869-5 2001, IEC 61869-3
3155ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
CVT (Above 3.6kV to 420kV) Ferro Resonance Test IEC 61869-5
3156ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
CVT (above 3.6kV to 420kV) Short circuit withstandcapability test IEC 61869-5
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 290 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
3157ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Electric Power connection for substations Resistance Measurement NEMA CC-1 2009 (RA
3158ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Electric Power connection for substations Resistance Measurement NEMA CC-1 2009 (RA
3159ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Electric Power connection for substations Temperature Rise Test NEMA CC-1 2009 (RA
3160ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Electric power connectors Resistance test IS 5561 :
3161ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Electric Power connectors Short time current test IS 5561:
3162ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Electrical Connectors – Connectors to Use BetweenAluminium – to – Aluminium Or Aluminium – to – CopperBare Overhead Conductors
Temperature Rise Test ANSI/IEEE C 119.4
3163ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Electrical Connectors – Connectors to Use BetweenAluminium – to – Aluminium Or Aluminium – to – CopperBare Overhead Conductors
Temperature Rise Test ANSI/IEEE C 119.4
3164ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Electrical power connectors Temperature rise test IS 5561
3165ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
H.V Fuse - Current limiting fuses H.V Fuse - Expulsion ofsimilar fuses Temperature Rise Test
IS 9385-1-2018 / IEC 60282-12009, IS 9385 part 2 2018 / IEC60282-2 2008, IEC 60282-12014, IEC 60282-2
3166ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Hard Drawn Stranded Aluminium and Steel coredAluminium Conductors for Over head Power TransmissionPurpose Aluminium conductor for overhead transmissionpurposes- Aluminium conductor galvanised steel reinforcedAluminium conductor galvanised steel reinforced for extrahigh voltage (400kv and above)
Resistance MeasurementIS 398-1 1996 (RA 2018), IS398-2 1996 (RA 2018), IS398-5 1992 (RA:
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 291 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
3167ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Hard Drawn Stranded Aluminium and Steel coredAluminium Conductors for Over head Power TransmissionPurpose Aluminium conductor for overhead transmissionpurposes- Aluminium conductor galvanised steel reinforcedAluminium conductor galvanised steel reinforced for extrahigh voltage (400kv and above)
Resistance MeasurementIS 398-1 1996 (RA 2018), IS398-2 1996 (RA 2018), IS398-5 1992 (RA: :
3168ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Hard Drawn Stranded Aluminium and Steel coredAluminium Conductors for Over head Power TransmissionPurpose Aluminium conductor for overhead transmissionpurposes- Aluminium conductor galvanised steel reinforcedAluminium conductor galvanised steel reinforced for extrahigh voltage (400kv and above)
Temperature Rise TestIS 398-1 1996 (RA 2018), IS398-2 1996 (RA 2018), IS398-5 1992 (RA
3169ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
High Voltage Circuit Breakers Back to back capacitor bankcurrent switching tests
IS/IEC 62271-100: 2008(Reaffirmed 2017) ,IEC62271-100-2017,IEC62271–101
3170ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
High Voltage Circuit Breakers Back to back capacitor bankcurrent switching tests
IS/IEC 62271-100: 2008(Reaffirmed 2017) IEC62271-100-2017,IEC62271–101
3171ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
High Voltage Circuit Breakers Back to back capacitor bankcurrent switching tests
IS/IEC 62271-100: 2008(Reaffirmed 2017) IEC62271-100-2017,IEC62271–101
3172ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
High Voltage Circuit Breakers Back to back capacitor bankcurrent switching tests
IS/IEC 62271-100: 2008(Reaffirmed 2017) IEC62271-100-2017,IEC62271–101
3173ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
High Voltage Circuit BreakersBasic Short circuit test dutiesand short line fault tests -Direct test facility - Synthetictest facility
IS/IEC 62271-100: 2008(Reaffirmed 2017) IEC62271-100-2017,IEC 62271–101
3174ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
High Voltage Circuit BreakersBasic Short circuit test dutiesand short line fault tests -Direct test facility - Synthetictest facility
IS/IEC 62271-100: 2008(Reaffirmed 2017) IEC62271-100:2017 , IEC 62271 –101
3175ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
High Voltage Circuit BreakersBasic Short circuit test dutiesand short line fault tests -Direct test facility - Synthetictest facility
IS/IEC 62271-100: 2008(Reaffirmed 2017) IEC62271-100:2017,IEC 62271 –101
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 292 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
3176ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
High Voltage Circuit BreakersBasic Short circuit test dutiesand short line fault tests -Direct test facility - Synthetictest facility
IS/IEC 62271-100: 2008(Reaffirmed 2017) IEC62271-100:2017,IEC 62271 –101
3177ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
High Voltage Circuit Breakers Line/Cable charging currentswitching tests
IS/IEC 62271-100: 2008(Reaffirmed 2017) IEC62271-100
3178ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
High Voltage Circuit Breakers Line/Cable charging currentswitching tests
IS/IEC 62271-100: 2008(Reaffirmed 2017) IEC62271-100
3179ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
High Voltage Circuit Breakers Line/Cable charging currentswitching tests
IS/IEC 62271-100: 2008(Reaffirmed 2017) IEC62271-100
3180ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
High Voltage Circuit Breakers Line/Cable charging currentswitching tests
IS/IEC 62271-100: 2008(Reaffirmed 2017) IEC62271-100
3181ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
High Voltage Circuit Breakers Line/Cable charging currentswitching tests
IS/IEC 62271-100: 2008(Reaffirmed 2017) IEC62271-100
3182ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
High Voltage Circuit Breakers Mechanical operationIEC 62271-100-2017 ,IEC62271-1 – 2017 ,IS/IEC62271-100: 2008 (Reaffirmed2017)
3183ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
High Voltage Circuit BreakersOut of phase making andbreaking tests - Direct testingfacility - Synthetic test facility
IS/IEC 62271-100: 2008(Reaffirmed 2017) ,IEC62271-100-2017 , IEC62271–101
3184ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
High Voltage Circuit BreakersOut of phase making andbreaking tests - Direct testingfacility - Synthetic test facility
IS/IEC 62271-100: 2008(Reaffirmed 2017) IEC62271-100-2017,IEC62271–101
3185ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
High Voltage Circuit Breakers Short time current test
IS/IEC 62271-100: 2008(Reaffirmed 2017) ,IEC62271-100-2017, IS/IEC62271-1: 2007 (Reaffirmed2018), IEC 62271-1
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 293 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
3186ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
High Voltage Circuit Breakers Single capacitor bank currentswitching tests
IS/IEC 62271-100: 2008(Reaffirmed 2017) IEC62271-100
3187ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
High Voltage Circuit Breakers Single capacitor bank currentswitching tests
IS/IEC 62271-100: 2008(Reaffirmed 2017) IEC62271-100
3188ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
High Voltage Circuit Breakers Single capacitor bank currentswitching tests
IS/IEC 62271-100: 2008(Reaffirmed 2017) IEC62271-100
3189ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
High Voltage Circuit Breakers Single capacitor bank currentswitching tests
IS/IEC 62271-100: 2008(Reaffirmed 2017) IEC62271-100
3190ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
High Voltage Circuit BreakersSmall Inductive currentswitching tests (Transformermagnetising current)
IS/IEC 62271-100: 2008(Reaffirmed 2017) ,IEC62271-100:2017 ,IEC62271-110
3191ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
High Voltage Circuit BreakersSmall Inductive currentswitching tests (Transformermagnetising current)
IS/IEC 62271-100: 2008(Reaffirmed 2017), IEC62271-100-2017, IEC62271-110
3192ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
High Voltage Fuses Breaking capacity tests
IS 9385 Part-1/2/3/4/52018/2018/1980( Reaffirmed2018)/1983 (Reaffirmed2018)/1983 (Reaffirmed 2016)IEC 60282–1& 2 2014
3193ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Insulated bushings for alternating voltages above 1000V Temperature Rise Test IEC 60137
3194ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Insulator Strings Power Arc tests IEC 61467
3195ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Insulator Strings Power Arc tests IEC 61467
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 294 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
3196ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Insulator strings, Post Insulators, Railway insulators, Longrod insulators, Isolators, AB switches, Circuit Breakers,Reactors, Line Traps, Repair sleeves, Spacers, Spacerdampers, ACSR conductor and accessories rated from3.6kV to 400kV(inclusive)
Corona inception /Extinction
IS 7312006, IS 10162 2007, IS2071 pt1 2004, IS 2544 2006,IS 4318 2003, IS 398 pt. 52007, ANSI c29.1 1998, ANSI C29.2 1992, C29.3 /86,c29.4/84/, C29.5/84, C29.6/84,C 29.7a/86, C29.9/83, RDSOSPEC 4318, IEC 60060-1
3197ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Inter connecting Busbars for AC Voltage above 1kV uptoand including 36kV Temperature Rise Test IS 8084-1996, (RA)
3198ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
L V Distribution Fuse Boards Temperature Rise Test ESI Standard 37-2: Issue 3:Amd1
3199ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Lightning Arrester Low current short-circuit test IEC 60099-4
3200ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Lightning Arrester Pressure Relief tests IS 3070 part 3 1993(RA 2014),IEC 60099-4
3201ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Lightning Arrester Pressure Relief testsIS 3070 part 3:1993(Reaffirmed 2014) IEC 60099 –4
3202ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Lightning Arrester Time versus current curve IEC 60099-4 : 2014 IS:3070(Part 3) : 1993 (RA
3203ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Line Traps Short Time current test IS 8793 – 1995 (RA 2016) IEC60353 – 1989/ AMD1
3204ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Line Traps Short Time current test IS 8793 2008, IEC 60353
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 295 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
3205ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Low voltage switchgear and control-gear assemblies (Busbar trunking system) Short Time Current Test IEC 61439-6
3206ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Low voltage switchgear and control-gear assemblies(Busbar Trunking system) Short Time Current Test IEC 61439-6
3207ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Off-Load tap changer Temperature Rise Test IEC 60214-1
3208ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
On Load Tap Changers Temperature Rise Test IS 8468 1977 (RA
3209ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
ON-Load tap changer Temperature Rise Test IEC 60214-1
3210ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Performance requirements of compression joints ofaluminium conductors in insulated cables Resistance Measurement IS 8337 1976 (RA
3211ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Performance requirements of compression joints ofaluminium conductors in insulated cables Resistance Measurement IS 8337 1976 (RA
3212ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Portable Equipment for earthing Short Time current Test IEC 61230
3213ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Portable Equipment for earthing Short Time current Test IEC 61230
3214ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Power Conne-ctors ACSR conductor Short Time current test IS 5561
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 296 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
3215ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Power Connectors ACSR conductor Short Time current test IS 5561
3216ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Power Connectors ACSR conductor Short Time current test IS 5561
3217ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Power Connectors ACSR conductor Short Time current test IS 5561
3218ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Power Connectors ACSR conductor Short Time current test IS 5561
3219ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Power Transformers Distribution Transformers, Tractiontransformers, Potential transformers
Ability to withstand shortcircuit & all routine tests
IS 2026 – part 1,2,3,52011(Reaffirmed 2016)/2010(Reaffirmed 2015) /2009(Reaffirmed 2014) /2011(Reaffirmed 2016) IEC 60076 –part 1/2/3/5/10,2011/2011/2013(Amd.1/2018)/2006/2016 IS 11171-1985(Reaffirmed 2016) IEC 60076 –11 2018 IS 1180 – 2014 IEC60310 – 2016 IEC61869-5-2011 IEC 61869-3-2011 ANSI :C-57.12.00:2015ANSI :C.57.12.90 :2015 Cor 1
3220ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Power Transformers Distribution Transformers, Tractiontransformers, Potential transformers
Ability to withstand shortcircuit & all routine tests
IS 2026 – part 1,2,3,52011Reaffirmed 2016)/2010(Reaffirmed 2015) /2009(Reaffirmed 2014) /2011(Reaffirmed 2016) IEC 60076 –part 1/2/3/5/10,2011/2011/2013(Amd.1/2018)/2006/2016 IS 11171-1985(Reaffirmed 2016) IEC 60076 –11 2018 IS 1180 – 2014 IEC60310 – 2016 IEC61869-5-2011 IEC 61869-3-2011 ANSI :C-57.12.00:2015ANSI :C.57.12.90 :2015 Cor 1
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 297 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
3221ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Power Transformers Distribution Transformers, Tractiontransformers, Potential transformers Loss Measurement IS 2026 – part 1:2011, IEC
60076 – part 1
3222ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Railway applications – Rolling stock – Pantographs –Characteristics and tests –Part 1: Pantographs for main linevehicles
Temperature Rise Test IEC 60494-1
3223ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Railway applications – Rolling stock – Pantographs –Characteristics and tests –Part 1: Pantographs for main linevehicles
Temperature Rise Test IEC 60494-1
3224ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Railway Pantograph- Railway applications, Rolling Stock,Pantographs-Characteristics and tests- part 1 Pantographsfor main line vehicles
Temperature Rise Test IEC 60949-1
3225ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Reactors Short Time current test
IS 5553 – Parts 1/2/3/4/5/6/7/81989/1990/1990/1989/1989/1990/1990/1990 (Reaffirmed2013/2013/2013/2014/2014/2016/2014/2014) IEC 60076-6
3226ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Reactors Short Time current test
IS 5553 – Parts 1/2/3/4/5/6/7/81989/1990/1990/1989/1989/1990/1990/1990 (Reaffirmed2013/2013/2013/2014/2014/2016/2014/2014) IEC 60076-6
3227ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Slip Strength/ Mechanical Strength etc Compression Clamps IS 2486 (Part I):1993 RA 2013IEC 61238-1
3228ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Voltage transformers – Measuring voltage transformersUpto132KV Temperature Rise Test
IS 3156 part 1 2007, IS 3156part 2 2007, IS 3156 part 32007, IS 3156 part 4
3229ELECTRICAL-TRANSMISSION LINEEQUIPMENT &ACCESSORIES
Voltage transformers – Measuring voltage transformersUpto132KV Temperature Rise Test
IS 3156 part 1, 2007, IS 3156part 2 2007, IS 3156 part 32007, IS 3156 part 4
3230 ELECTRICAL- WIRINGACCESSORIES Electric Ceiling Fan and Regulators Air Delivery (Cl. 10.3) IS: 374
3231 ELECTRICAL- WIRINGACCESSORIES Electric Ceiling Fan and Regulators Creepage distances and
Clearance (cl 10.15) IS: 374
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 298 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
3232 ELECTRICAL- WIRINGACCESSORIES Electric Ceiling Fan and Regulators Earthing connections (cl 10.10) IS: 374
3233 ELECTRICAL- WIRINGACCESSORIES Electric Ceiling Fan and Regulators Fan speed and input (Cl. 10.9) IS: 374
3234 ELECTRICAL- WIRINGACCESSORIES Electric Ceiling Fan and Regulators High voltage (Cl. 10.6) IS: 374
3235 ELECTRICAL- WIRINGACCESSORIES Electric Ceiling Fan and Regulators Insulation resistance (Cl. 10.7) IS: 374
3236 ELECTRICAL- WIRINGACCESSORIES Electric Ceiling Fan and Regulators Leakage Current Cl 10.5 of IS: 374
3237 ELECTRICAL- WIRINGACCESSORIES Electric Ceiling Fan and Regulators Mechanical endurance (for
regulator only) (cl10.16) IS: 374
3238 ELECTRICAL- WIRINGACCESSORIES Electric Ceiling Fan and Regulators Mechanical strength (for
regulators only) (cl 10.13) IS: 374
3239 ELECTRICAL- WIRINGACCESSORIES Electric Ceiling Fan and Regulators Moisture resistance(for
regulators only ) (cl 10.12) IS: 374
3240 ELECTRICAL- WIRINGACCESSORIES Electric Ceiling Fan and Regulators Protection against electric
shock (cl 10.11) IS: 374
3241 ELECTRICAL- WIRINGACCESSORIES Electric Ceiling Fan and Regulators Starting (Cl. 10.8) IS: 374
3242 ELECTRICAL- WIRINGACCESSORIES Electric Ceiling Fan and Regulators Suspension system (10.14) IS: 374
3243 ELECTRICAL- WIRINGACCESSORIES Electric Ceiling Fan and Regulators Temperature rise (Cl. 10.4) IS: 374
3244 ELECTRICAL- WIRINGACCESSORIES Electric Ceiling Type fans Endurance Test (Cl. 16) IS 374
3245 ELECTRICAL- WIRINGACCESSORIES Electric Ceiling Type fans Interchangeability (Cl. 12) IS 374
3246 ELECTRICAL- WIRINGACCESSORIES Electric Ceiling Type fans Performance Requirements (Cl. 15) IS 374
3247 ELECTRICAL- WIRINGACCESSORIES Electric Ceiling Type fans Power Input
Cl. 10 of IS 302 (Part 2 /Sec80)/ Cl. 18.2, Table 2(viii), IS374
3248 ELECTRICAL- WIRINGACCESSORIES Electric Ceiling Type fans Safety Requirements (Cl. 9) IS 374
3249 ELECTRICAL- WIRINGACCESSORIES Electric Ceiling Type fans Silent Operation (Cl. 13) IS 374
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 299 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
3250 ELECTRICAL- WIRINGACCESSORIES Electric Ceiling Type fans Speed and power factor (Cl. 14.4 & 14.5) IS 374
3251 ELECTRICAL- WIRINGACCESSORIES Electric Ceiling Type fans Speed Regulators (Cl. 10) IS 374
3252 ELECTRICAL- WIRINGACCESSORIES Electric Ceiling Type fans Starting (Cl. 11) IS 374
3253 ELECTRICAL- WIRINGACCESSORIES Electric Ceiling Type fans Test for harmonic distortion (Cl. 17) IS 374
3254 ELECTRICAL- WIRINGACCESSORIES Electrical table type fans and regulators Air delivery (Cl 10.3) IS 555:1979 RA
3255 ELECTRICAL- WIRINGACCESSORIES Electrical table type fans and regulators Cord grip (Cl 10.14) IS 555: 1979 RA
3256 ELECTRICAL- WIRINGACCESSORIES Electrical table type fans and regulators Creepage distance and
clearance (Cl 10.15) IS 555: 1979 RA
3257 ELECTRICAL- WIRINGACCESSORIES Electrical table type fans and regulators Earthing connections (Cl 10.10) IS 555: 1979 RA
3258 ELECTRICAL- WIRINGACCESSORIES Electrical table type fans and regulators Fan speed and input (Cl 10.9) IS 555: 1979 RA
3259 ELECTRICAL- WIRINGACCESSORIES Electrical table type fans and regulators High voltage (cl.10.6) IS 555: 1979 RA
3260 ELECTRICAL- WIRINGACCESSORIES Electrical table type fans and regulators Insulation resistance (Cl 10.7.1) IS 555: 1979 RA
3261 ELECTRICAL- WIRINGACCESSORIES Electrical table type fans and regulators Leakage current (Cl 10.5) IS 555
3262 ELECTRICAL- WIRINGACCESSORIES Electrical table type fans and regulators Mechanical endurance test(for
regulator only) ( Cl 10.13) IS 555: 1979 RA
3263 ELECTRICAL- WIRINGACCESSORIES Electrical table type fans and regulators Moisture resistance (Cl 10.12) IS 555: 1979 RA
3264 ELECTRICAL- WIRINGACCESSORIES Electrical table type fans and regulators Oscillating mechanism (Cl 10.16)IS 555: 1979 RA
3265 ELECTRICAL- WIRINGACCESSORIES Electrical table type fans and regulators Protection against electric
shock (For regulators only) ( Cl 10.11) IS 555: 1979 RA
3266 ELECTRICAL- WIRINGACCESSORIES Electrical table type fans and regulators Starting (Cl 10.8)IS 555: 1979 RA
3267 ELECTRICAL- WIRINGACCESSORIES Electrical table type fans and regulators Temperature rise (Cl. 10.4) IS 555
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 300 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
3268MECHANICAL-MECHANICAL PROPERTIESOF METALS
Complete Insulator String along with its hardware fittingexcluding arcing horn, corona control ring, grading ring andsuspension assembly/ dcnd end assembly
Mechanical strength tests -Tensile failing load
SOP MED/TM-01 Issue No. 1dated 06.05.2019 and Revision00
3269MECHANICAL-MECHANICAL PROPERTIESOF METALS
Complete Insulator String along with its hardware fittingexcluding arcing horn, corona control ring, grading ring andsuspension assembly/ dcnd end assembly
Mechanical strength tests-Tensile at 67% of the minimumUTS specified
SOP MED/TM-01 Issue No. 1dated 06.05.2019, Revision 00
3270MECHANICAL-MECHANICAL PROPERTIESOF METALS
Complete Insulator String along with its hardware fittingexcluding arcing horn, corona control ring, grading ring andsuspension assembly/ dcnd end assembly
Mechanical strength tests -Tensile at minimum specifiedUTS
SOP MED/TM-01, Issue No. 1dated 06.05.2019, Revision 00
3271MECHANICAL-MECHANICAL PROPERTIESOF METALS
Compression Clamps Mechanical Strength etcIS 2486 (Part I): 1993 , Cl.11IEC 61238-1-1: 2018, IEC61238-10-3
3272MECHANICAL-MECHANICAL PROPERTIESOF METALS
Compression Clamps Slip StrengthIS 2486 (Part I): 1993 , Cl.11IEC 61238-1-1: 2018, IEC61238-10-3: 2018
3273MECHANICAL-MECHANICAL PROPERTIESOF METALS
Compression Clamps Slip Strength & MechanicalStrength
IS 2486 (Part I): 1993, Cl. 11 ofIEC 61238-1:2018, IEC61238-10-3
3274MECHANICAL-MECHANICAL PROPERTIESOF METALS
I & V Suspension Tension String Up to & Including 800 kVRating Mechanical Strength Test
Power Grid specificationsapplicable for projects e. g.C-01814-L179-3/G10.
3275MECHANICAL-MECHANICAL PROPERTIESOF METALS
I & V Suspension Tension String Up to & Including 800 kVRating Mechanical Strength Test
Power Grid specificationsapplicable for projects e. g.C-01814-L179-3/G10.
3276MECHANICAL-MECHANICAL PROPERTIESOF METALS
Insulator & Insulator Strings of Single/ Twin/Triple/ Quad-Tension or Suspension type upto & including 800 kV Rating
Assembled core load time test& Damage Limit Proof test
IEC 61109: 2008, Cl. 10.4,11.2.
3277MECHANICAL-MECHANICAL PROPERTIESOF METALS
Insulator & Insulator Strings of Single/ Twin/Triple/ Quad-Tension or Suspension type upto & including 800 kV Rating
Mechanical Strength Test (24Hours) Cl. 10.9 of IS 731
3278MECHANICAL-MECHANICAL PROPERTIESOF METALS
Insulator & Insulator Strings of Single/ Twin/Triple/ Quad-Tension or Suspension type upto & including 800 kV Rating
Mechanical test/ MechanicalPerformance test
IEC 60383-1: 1993, IEC60383-2: 1993, IEC TR 60575:1977
3279MECHANICAL-MECHANICAL PROPERTIESOF METALS
Insulator & Insulator Strings of Single/ Twin/Triple/ Quad-Tension or Suspension type upto & including 800 kV Rating Mechanical Failing Load Test IS 731
3280MECHANICAL-MECHANICAL PROPERTIESOF METALS
LINE MATERIAL Axial & Radial Displacement IEC 60383-1
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 301 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
3281MECHANICAL-MECHANICAL PROPERTIESOF METALS
Line Material Bending TestIS 1445: 1977, IS 5350 (PartIII): 1971, IS 2544 : 1973 , IS731: 1971. IEC 60168
3282MECHANICAL-MECHANICAL PROPERTIESOF METALS
LINE MATERIAL COMPRESSION TESTIS 1445: 1977, IS 5350 (PartIII): 1971, IS 2544: 1973, IEC60168- 2001, IS 5300: 1969.
3283MECHANICAL-MECHANICAL PROPERTIESOF METALS
Line Material Compression TestIS 1445: 1977, IS 5350 (PartIII): 1971, IS 2544: 1973, IEC60168- 2001, IS 5300: 1969.
3284MECHANICAL-MECHANICAL PROPERTIESOF METALS
Line Material Mechanical Failing Load Test IEC 60383-1:1993, Cl. 19 IS731
3285MECHANICAL-MECHANICAL PROPERTIESOF METALS
Line Material Mechanical Strength Test(Tensile) IS 2486 (Part I)
3286MECHANICAL-MECHANICAL PROPERTIESOF METALS
Line Material Residual Strength (Tensile) IEC TR 60797
3287MECHANICAL-MECHANICAL PROPERTIESOF METALS
Line Material Slip Strength IS 2486 (Part I)
3288MECHANICAL-MECHANICAL PROPERTIESOF METALS
LINE MATERIAL Slip Strength & MechanicalStrength Test (Tensile) IS 2486 (Part I)
3289MECHANICAL-MECHANICAL PROPERTIESOF METALS
LINE MATERIAL TENSILEIS 5350 (Part III): 1971, IS2544: 1973, IS 731: 1971, IEC60168
3290MECHANICAL-MECHANICAL PROPERTIESOF METALS
Mid Span Joint Failing Load Test IS 2121 (Part III): 1992
3291MECHANICAL-MECHANICAL PROPERTIESOF METALS
MID SPAN JOINT Mechanical Failing load Test IS 2121 (Part III)
3292MECHANICAL-MECHANICAL PROPERTIESOF METALS
Preformed Armor Rod Slip Strength test IS 2121 (Part 1): 1981
3293MECHANICAL-MECHANICAL PROPERTIESOF METALS
Preformed Armor Rod Tensile Test IS 2121 (Part 1)
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 302 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
3294MECHANICAL-MECHANICAL PROPERTIESOF METALS
Preformed Armor Rod Tensile test IS 2121 (Part 1): 1981
3295MECHANICAL-MECHANICAL PROPERTIESOF METALS
Spacer/Spacer Damper up to & including 800 kV Assembly Torque Test IS 10162: 1982
3296MECHANICAL-MECHANICAL PROPERTIESOF METALS
Spacer/Spacer Damper up to & including 800 kV Clamp Bolt Torque Test IS 10162: 1982, IEC 61854
3297MECHANICAL-MECHANICAL PROPERTIESOF METALS
Spacer/Spacer Damper up to & including 800 kV Clamp Slip Test IS 10162: 1982, IEC 61854
3298MECHANICAL-MECHANICAL PROPERTIESOF METALS
Spacer/Spacer Damper up to & including 800 kV Compression & Pull off /Tension test IS 10162: 1982, IEC 61854
3299MECHANICAL-MECHANICAL PROPERTIESOF METALS
Spacer/Spacer Damper up to & including 800 kV Movement Test IS 10162
3300MECHANICAL-MECHANICAL PROPERTIESOF METALS
Spacer/Spacer Damper up to & including 800 kV Tensile Load Test IS 10162: 1982
3301MECHANICAL-MECHANICAL PROPERTIESOF METALS
Steel PolesTemporary Deflection,Permanant set test, Breakingload test.
IS 2713 (Part I to III)
3302MECHANICAL-MECHANICAL PROPERTIESOF METALS
Structural Steel Bend Test IS 1599: 2012 / ISO 7438
3303MECHANICAL-MECHANICAL PROPERTIESOF METALS
STRUCTURAL STEELGalvanizing Coating ThicknessMeasurement (MagneticMethod)
IS 3203: 1982, IS 4759:1996,ISO 2178: 2016, BS EN ISO1461
3304MECHANICAL-MECHANICAL PROPERTIESOF METALS
STRUCTURAL STEEL Tensile Strength, Yield Stress,Elongation IS 1608-1: 2018 / ISO 6892
3305MECHANICAL-MECHANICAL PROPERTIESOF METALS
Substation Equipments/ Current Transformers/PowerTransformers/CVTs/ Capacitors Bushings/ PolymerInsulators
Cantilever Failing load IEC 61952
3306MECHANICAL-MECHANICAL PROPERTIESOF METALS
Substation Equipments/ Current Transformers/PowerTransformers/CVTs/ Capacitors Bushings/ PolymerInsulators
Mechanical bending test IEC 60358-1: 2012
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 303 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
3307MECHANICAL-MECHANICAL PROPERTIESOF METALS
Substation Equipments/ Current Transformer/ PowerTRansformer/CVTs/Capacitors Bushings/ Polymer Insulators Bending test IEC-61462-2007:02, Cl:8.5
3308MECHANICAL-MECHANICAL PROPERTIESOF METALS
Substation Equipments/ Current Transformer/ PowerTRansformer/CVTs/Capacitors Bushings/ Polymer Insulators Bending test IEC-62155 :2003-05, Cl:8.3
3309MECHANICAL-MECHANICAL PROPERTIESOF METALS
Substation Equipments/ Current Transformer/ PowerTRansformer/CVTs/Capacitors Bushings/ Polymer Insulators Bending test IS-3070(part3):1993 RA-14
Cl:6.3
3310MECHANICAL-MECHANICAL PROPERTIESOF METALS
Substation Equipments/ Current Transformer/ PowerTRansformer/CVTs/Capacitors Bushings/ Polymer Insulators
Bending test/Torsion test/Tensile/Compression test
IS-9431:1979, RA-14,Cl:9.6.5,9.6.6.,9.6.7
3311MECHANICAL-MECHANICAL PROPERTIESOF METALS
Substation Equipments/ Current Transformer/ PowerTRansformer/CVTs/Capacitors Bushings/ Polymer Insulators Cantilever Load withstand test IEC-60137-2008:07, Cl 8.9
3312MECHANICAL-MECHANICAL PROPERTIESOF METALS
Substation Equipments/ Current Transformer/ PowerTRansformer/CVTs/Capacitors Bushings/ Polymer Insulators Cantilever Load withstand test IS-2099:1986 RA 16,Cl:11.10
3313MECHANICAL-MECHANICAL PROPERTIESOF METALS
Substation Equipments/ Current Transformer/ PowerTRansformer/CVTs/Capacitors Bushings/ Polymer Insulators Cantilever test IS-9348:1998, RA18, Cl:16
3314MECHANICAL-MECHANICAL PROPERTIESOF METALS
Substation Equipments/ Current Transformer/ PowerTRansformer/CVTs/Capacitors Bushings/ Polymer Insulators Mechanical Failing load test IEC-60168:2001-04 Cl:5.2
3315MECHANICAL-MECHANICAL PROPERTIESOF METALS
Substation Equipments/ Current Transformer/ PowerTRansformer/CVTs/Capacitors Bushings/ Polymer Insulators Mechanical Load test IEC-61109:2008:05, Cl:10.4.2
3316MECHANICAL-MECHANICAL PROPERTIESOF METALS
Substation Equipments/ Current Transformer/ PowerTRansformer/CVTs/Capacitors Bushings/ Polymer Insulators
Mechanical strengthtest(Tensile/Compression)
IS-5350(Part1):1970 RA-14,Cl:3.1,3.3
3317MECHANICAL-MECHANICAL PROPERTIESOF METALS
Substation Equipments/ Current Transformer/ PowerTRansformer/CVTs/Capacitors Bushings/ Polymer Insulators Mechanical test IEC-60044-1 2003:02, Cl:9.3
3318MECHANICAL-MECHANICAL PROPERTIESOF METALS
Substation Equipments/ Current Transformer/ PowerTRansformer/CVTs/Capacitors Bushings/ Polymer Insulators
Mechanicaltest(Tensile/Torsion/Bending)
IS-2705(Part 1):1992,RA-17,IEC 61869-1:2007, Cl:7.4.5
3319MECHANICAL-MECHANICAL PROPERTIESOF METALS
Substation Equipments/ Current Transformer/ PowerTRansformer/CVTs/Capacitors Bushings/ Polymer Insulators Tensile test IS-5561:1970::RA-18 Cl:10
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 304 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
3320MECHANICAL-MECHANICAL PROPERTIESOF METALS
Substation Equipments/ Current Transformer/ PowerTRansformer/CVTs/Capacitors Bushings/ Polymer Insulators
Test of Bending moment(Onlybending/cantilever/MBL/SSLtest only, Except Leakage andPD test)
IEC-60099-4 2014-06, Cl:8.11
3321MECHANICAL-MECHANICAL PROPERTIESOF METALS
Terminal Clamp Mechanical Failing Load Test(Tensile) IS 5561:1970,RA
3322MECHANICAL-MECHANICAL PROPERTIESOF METALS
TERMINAL CLAMP Mechanical Failing Load Test(Tensile) IS 5561
3323MECHANICAL-MECHANICAL PROPERTIESOF METALS
Transmission line Conductors upto & Including 800kV Breaking Load / UTS test
IS 398 (Part 1 ):1996, RA-18, IS398 (Part 2 ):1996, RA-18, IS398 (Part 3):1976, RA-14, IS398 (Part 4 ):1994, RA-14, IS398 (Part 5 ):1992, RA-18 ,IEC62420: 2008, Cl. 6.2.4, 6.2,6.2.5 BS EN 50182: 2001, Cl.6.4.1, 6.4.2, 6.4.4, 6.4.5, 6.4.6,6.4.8, 6.5.2, 6.6.1, C.5 IEC61089: Cl.6.5.3
3324MECHANICAL-MECHANICAL PROPERTIESOF METALS
Transmission line Conductors upto & Including 800kV Stress-strain test
IS 398 (Part 1 ):1996, RA-18, IS398 (Part 2 ):1996, RA-18, IS398 (Part 3):1976, RA-14, IS398 (Part 4 ):1994, RA-14, IS398 (Part 5 ):1992, RA-18 ,IEC62420: 2008, Cl. 6.2.4, 6.2,6.2.5 BS EN 50182: 2001, Cl.6.4.1, 6.4.2, 6.4.4, 6.4.5, 6.4.6,6.4.8, 6.5.2, 6.6.1, C.5 IEC61089: Cl.6.5.3
3325MECHANICAL-MECHANICAL PROPERTIESOF METALS
Transmission line Conductors upto & Including 800kV Tensile Breaking Strength /RTS
IS 398 (Part 1 ):1996, RA-18, IS398 (Part 2 ):1996, RA-18, IS398 (Part 3):1976, RA-14, IS398 (Part 4 ):1994, RA-14, IS398 (Part 5 ):1992, RA-18 ,IEC62420: 2008, Cl. 6.2.4, 6.2,6.2.5 BS EN 50182: 2001, Cl.6.4.1, 6.4.2, 6.4.4, 6.4.5, 6.4.6,6.4.8, 6.5.2, 6.6.1, C.5 IEC61089: Cl.6.5.3
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 305 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
3326MECHANICAL-MECHANICAL PROPERTIESOF METALS
Transmission line Conductors upto & Including 800kV Type test on Individual wires
IS 398 (Part 1 ):1996, RA-18, IS398 (Part 2 ):1996, RA-18, IS398 (Part 3):1976, RA-14, IS398 (Part 4 ):1994, RA-14, IS398 (Part 5 ):1992, RA-18 ,IEC62420: 2008, Cl. 6.2.4, 6.2,6.2.5 BS EN 50182: 2001, Cl.6.4.1, 6.4.2, 6.4.4, 6.4.5, 6.4.6,6.4.8, 6.5.2, 6.6.1, C.5 IEC61089: Cl.6.5.3
3327MECHANICAL-MECHANICAL PROPERTIESOF METALS
Transmission Line Towers & Mono Poles Prototype tests IS 802 (Part III): 1978, IEC60652
3328MECHANICAL-MECHANICAL PROPERTIESOF METALS
Vibration Damper upto and including 800 kV Clamp bolt torque test IS 9708:1993 ,RA-14, Cl. 7.10
3329 MECHANICAL- NOISE &VIBRATION
Insulator & Insulator Strings of Single/ Twin/Triple/ Quad-Tension or Suspension type upto & including 800 kV Rating Fatigue/ Vibration Test Power Grid Specification
3330 MECHANICAL- NOISE &VIBRATION Spacer/Spacer Damper up to & including 800 kV Aeolian Vibration test IEC 61854: Cl. 7.5.7.3
3331 MECHANICAL- NOISE &VIBRATION Spacer/Spacer Damper up to & including 800 kV Log Decrement Test IEC 61854: 1998, Cl. 7.5.5 c IS
10162:1982, RA-18 , Cl. 5.17
3332 MECHANICAL- NOISE &VIBRATION Spacer/Spacer Damper up to & including 800 kV Longitudinal Vibration Test
IS 10162:1982 RA-18, Cl. 5.11IEC 61854: 1998, Cl. 7.5.7 IS10162:1982 ,RA-18, Cl. 5.11.1
3333 MECHANICAL- NOISE &VIBRATION Spacer/Spacer Damper up to & including 800 kV Sub-span Oscillation Test IEC 61854: Cl. 7.5.7.2
3334 MECHANICAL- NOISE &VIBRATION Spacer/Spacer Damper up to & including 800 kV Vertical vibration Test. IS 10162:1982 ,RA-18, Cl.
5.11.2
3335 MECHANICAL- NOISE &VIBRATION Spacer/Spacer Damper up to & including 800 kV Vibration Test
IS 10162:1982 RA-18, Cl. 5.11IEC 61854: 1998, Cl. 7.5.7 IS10162:1982 , Cl. 5.11.1
3336 MECHANICAL- NOISE &VIBRATION Vibration Damper upto and including 800 kV Damper Efficiency test IS 9708:1993 ,RA-14, Cl. 7.8
3337 MECHANICAL- NOISE &VIBRATION Vibration Damper upto and including 800 kV Dynamic Characteristics Test IS 9708:1993, RA-14 Cl. 7.7
3338 MECHANICAL- NOISE &VIBRATION Vibration Damper upto and including 800 kV Fatigue/ Vibration Test IS 9708:1993, RA-14, Cl. 7.5
3339 MECHANICAL- NOISE &VIBRATION Vibration Damper upto and including 800 kV Resonance frequency test IS 9708:1993,RA-14, Cl. 7.4
Laboratory Name : CENTRAL POWER RESEARCH INSTITUTE, PROF SIR C V RAMAN ROAD, BENGALURU,KARNATAKA, INDIA
Accreditation Standard ISO/IEC 17025:2017Certificate Number TC-5452 Page No 306 of 306Validity 10/06/2019 to 09/06/2021* Last Amended on 25/05/2021
*The validity is extended for one year up to 09.06.2022
This is annexure to 'Certificate of Accreditation' and does not require any signature.
S.No Discipline / Group Materials or Products tested
Component, parameter orcharacteristic tested /
Specific Test Performed /Tests or type of tests
performed
Test Method Specificationagainst which tests areperformed and / or thetechniques / equipment
used
3340 MECHANICAL- NOISE &VIBRATION Vibration Damper upto and including 800kV Clamp slip test IS 9708-1993 RA-14, Cl:7.9