ladder compliance made easy - home - lad-top · 2019. 12. 18. · ladder compliance made easy...

LADDERCOMPLIANCEMADEEASY LAD-TOP SECURESYOURFIXEDLADDERS KEEPING YOURWORKERSSAFEFROM FALL LAD-TOP ® was designed with one thing in mind: worker safety. OSHA’s Walking Working Surfaces Standard 1910.27 now requires all new fixed ladders over 24 feet to have a ladder safety system in place. We had safety on the mind long before it became a requirement. ENSURETHESAFETY OF EMPLOYEES While OSHA’s Walking-Working Surfaces and Personal Fall Protection Systems Final Rule requires ladder safety systems in place for fixed ladders greater than 24 feet in height (and gives existing workplaces two decades to implement them), many of our clients hold themselves at a higher safety standard, installing them on fixed ladders of all heights. A fall of any distance is worthy of prevention. PERFORM TASKSW ITH EASE LAD-TOP ® (ladder tie off post) is a ladder stanchion that is bolted to your existing fixed ladder systems. Connect the SRL of your choice to the attachment lug. Your employees simply pull the snap hook from the SRL and attach to either their front or back D-ring of their harness. Once they are connected to the SRL, they can simply climb the ladder, maintaining 3-point contact and 100% tie-off until they safely reach their next walking surface. LAD-TOP ® offers full mobility to transfer from the ladder to the platform with ease.

Upload: others

Post on 05-Oct-2020

4 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

LADDER COMPLIANCE MADE EASY

LAD-TOP SECURES YOUR FIXED LADDERS KEEPING YOUR WORKERS SAFE FROM FALL

LAD-TOP® was designed with one thing in mind: worker safety. OSHA’s Walking Working Surfaces Standard 1910.27 now requires all new fixed ladders over 24 feet to have a ladder safety system in

place. We had safety on the mind long before it became a requirement.

ENSURE THE SAFETY OF EMPLOYEES

While OSHA’s Walking-Working Surfaces and Personal Fall Protection Systems Final Rule requires ladder safety systems in place for fixed ladders greater than 24 feet in height (and gives existing workplaces two decades to implement them), many of our clients hold themselves at a higher safety standard, installing them on fixed ladders of all heights. A fall of any distance is worthy of prevention.

PERFORM TASKS WITH EASE

LAD-TOP® (ladder tie off post) is a ladder stanchion that is bolted to your existing fixed ladder systems. Connect the SRL of your choice to the attachment lug. Your employees simply pull the snap hook from the SRL and attach to either their front or back D-ring of their harness. Once they are connected to the SRL, they can simply climb the ladder, maintaining 3-point contact and 100% tie-off until they safely reach their next walking surface. LAD-TOP® offers full mobility to transfer from the ladder to the platform with ease.

Page 2: LADDER COMPLIANCE MADE EASY - Home - LAD-TOP · 2019. 12. 18. · LADDER COMPLIANCE MADE EASY LAD-TOP SECURES YOUR FIXED LADDERS KEEPING YOUR WORKERS SAFE FROM FALL LAD-TOP® was

FEATURES

EASY INSTALLATIONLAD-TOP® is self-supporting making it simple to install. Four standard bolts + five minutes and you are done!

BUILT TO A HIGHER STANDARDThere is no standard when it comes to protecting your employees. Our products are built to surpass the minimum standard and are some of the only products designed and tested to comply with OSHA and ANSI Z359.18-

2017 standard.

INTERCHANGEABLE SRLLAD-TOP® is interchangeable

with your existing self-retracting lifelines. The

product will work with SRLs you already own. You are not limited to where you choose

to source them.

INDUSTRY LEADING CORROSION PROTECTION

LAD-TOP® offers you up to 2.5x corrosion protection with a Duplex coating of hot dip

galvanized and powder coated paint of your choosing.

FITS YOUREXISTING HARDWARE

Two LAD-TOP® options are available: one for front ladder

exit and one for side ladder exit.

AFFORDABLE USA QUALITYLAD-TOP® is 100%