lal205a-t dbs atsc directv amplifier
DESCRIPTION
Indoor / Outdoor 54 to 2150 MHz DBS line powered amplifier with automatic gain and external powering.TRANSCRIPT
S I T U A T I O N
F E A T U R E S
D E S C R I P T I O N
A P P L I C AT I O N N O T E S
S I T U A T I O N
F E A T U R E S
D E S C R I P T I O N
A P P L I C AT I O N N O T E S
Contact: Sonora Design Associates 805.644.8913 www.sonoradesign.com [email protected]
Revised Mar 30 2010
DBS signals need to be amplifi ed to a constant level and
extended to multiple distribution locations.
DBS signals from -28 to -48 dBm input produce an
output level of -20 dBm as measured on the upper
transponders (2050 MHz).
Amplifi ers may be coax line powered from either their
RF input or RF output connectors. Model LAL205a-T
includes an external power supply.
Model LAL205a amplifi ers may be spaced at (5) fl oor
increments when used with model
HRT124, HRT120, HRT116, HRT112, H R T10 9 and H R T10 6 d i re c t ional
couplers.
Vertical versions of the taps HRvT106, HRvT109 HRvT112, HRvT116, HRvT120and HRvT124 are also available.
The trunk level is indicated on the left and the tap level
output is indicated on the right.
DBS / ATSC AMPLIFIERS
Model LAL205a provides automatic gain controlled
outputs of -20 dBm @ 2150 MHz with 32 equal input
transponders within an input window of -25 dBm
to -48 dBm.
SOLUTION
RELATED CONSIDERATIONS
Indoor / Outdoor 54 to 2150 MHz DBS line powered
amplifi er with automatic gain and optional external
powering.
• ATSC / Ka/Ku bandwidth ......................... 54 to 2150 MHz
• Automatic Gain ............................... 20 dB input window
• DC & 22 kHz/DiSeQc passing ...................... low insertion
• Indoor / Outdoor case ........................ die cast aluminum
• LED AGC Signal Metering .....................Red & Green LEDs
HRvT116
HRvT112
HRvT106
HRvT120
DC
LAL205aSAT
1
OUT1
OUT4
OUT3 DC
SAT4
SAT3
OUT5
SAT5
OUT2
SAT2
DC
LAL205aSAT
1
OUT1
OUT4
OUT3 DC
SAT4
SAT3
OUT5
SAT5
OUT2
SAT2
-20 dBm -40 dBm
-28 dBm
-38 dBm
-33 dBm
-45 dBm
-20 dBm
-24 dBm
-40 dBm
-39 dBm
HRvT120
-40 dBm
-40 dBm
9
8
7
FLOOR5
FLOOR10
LAL205a
LAL205a (5) IN
PUT A
MPLIFIER
LAL205a-T
In-Line Coax Powered
S P E C I F I C A T I O N SS P E C I F I C A T I O N S
Contact: Sonora Design Associates 805.644.8913 www.sonoradesign.com [email protected]
Revised Mar 30 2010
Specifi cations ..............................Typical ....................... QC Limit
Gain (at inputs below AGC)
175 MHz ............................................... 23 dB .....................................21 dB
950 MHz ............................................... 26 dB .....................................22 dB
1450 MHz ............................................. 28 dB .....................................26 dB
2150 MHz ............................................. 31 dB .....................................29 dB
Maximum Input (32 equal transponders) .......................... -25 dBm
Automatic Gain Output (32 Equal Transponders) ................-20 dBm
Input Window............................................ ............ -25 to -48 dBm
(see spectrum plots for DIRECTV Ka / Ku signals)
Maximum Output Power (AGC limits output level)IM2 2 tones @ 8 dBm out .................-40 dBc ........................ -38 dBc min
IM3 2 Tones @ 8 dbm out ................-58 dBc ........................ -56 dBc min
Pass band Flatness
Any 24 MHz band ................................. 0.1 dB ....................................0.2 dB
Input Return Loss .................................. 14 dB .....................................11 dB
Output Return Loss ............................... 13 dB .....................................11 dB
Noise Figure .................................................6 dB .......................................7 dB
Power Specifi cations
Voltage .......................................................................................... 12 to 20 VDC
Current ................................................................................110 mA / channel
Environmental Specifi cations
Operating Environment: ...................................................Indoor/Outdoor
Ambient Temperature ....................................................... -30º C to +70º C
Mechanical Specifi cations ..................................... LAL205a
Dimensions .............................................................. 7.5” x 4.8” x 7/8”
(-T with 12V) ..................NO Supply
Weight ...................................2 lb (0.9 kg) ..................1 lb (0.45 kg)
Master Carton QTY ................. (18 units) ........................ (45 units)
Master Carton Size ..........20” x 10” x 10” .................. 19” x 15” x 6”
Master Carton Weight .....34 lb (15.5 kg) ............... 46 lb. (20.9 kg)
(6) Polarity Amplifi er
LAL206a-T
5V
AUTOGAIN
SEQ
5V
AUTOGAIN
SEQ
5V
AUTOGAIN
SEQ
5V
AUTOGAIN
SEQ
5V
AUTOGAIN
SEQ
LAL205a0 DBS/ATSCA AMPLIFIERPLAL205a DBS/ATSC AMPLIFIER
OUTPUT 1VDC DiSEqC INPUT
INPUT 1-28 dBm MAX
VDC DiSEqC OUT
OUTPUT 2VDC DiSEqC INPUT
OUTPUT 3VDC DiSEqC INPUT
OUTPUT 4VDC DiSEqC INPUT
OUTPUT 5VDC DiSEqC INPUT
INPUT 2-28 dBm MAX
VDC DiSEqC OUT
INPUT 3-28 dBm MAX
VDC DiSEqC OUT
INPUT 4-28 dBm MAX
VDC DiSEqC OUT
INPUT 5-28 dBm MAX
VDC DiSEqC OUT
12 to 20 VDCAMPLIFIER
POWER
12 to 20 VDC
Slope CompensatedAutomatic Gain 175 to 2400 MHz
OUTPUTVDC DiSEqC INPUT
INPUT-28 dBm MAX
VDC DiSEqC OUT
Slope CompensatedAuto Gain 250 to 2400 MHz
LAL20a0 DBS AMPLIFIERLLAL20a DBS AMPLIFIER
VDCAMP
20 VDC LNB
VDCAMP
5V
AUTOGAIN
AGC+20 dBm OUT with
TERMINATOR
AGC portUn-terminated shifts input window for - 15 dBm output
PS121000
DBS AUTO GAIN AMPS
Side Car Powering
LAL205a Power Options
Model LAL205a-T includes a 12 V, 1 Amp power
supply that may be use to power the amplifi er. DC
is connected to either the top right “12 to 20 VDC
AMPLIFIER POWER” input or lower right connector.
Power passes top to bottom or bottom to top if
additional items need DC power.
Model LAL205a & LAL20a-T amplifiers may be
used together to function as a LAL206a-T, (6) input
amplifi er. Power from the LAL20a-T loops to power
the LAL205a.
5V
AUTOGAIN
SEQ
5V
AUTOGAIN
SEQ
5V
AUTOGAIN
SEQ
5V
AUTOGAIN
SEQ
5V
AUTOGAIN
SEQ
LAL205a0 DBS/ATSCA AMPLIFIERPLAL205a DBS/ATSC AMPLIFIER
OUTPUT 1VDC DiSEqC INPUT
INPUT 1-28 dBm MAX
VDC DiSEqC OUT
OUTPUT 2VDC DiSEqC INPUT
OUTPUT 3VDC DiSEqC INPUT
OUTPUT 4VDC DiSEqC INPUT
OUTPUT 5VDC DiSEqC INPUT
INPUT 2-28 dBm MAX
VDC DiSEqC OUT
INPUT 3-28 dBm MAX
VDC DiSEqC OUT
INPUT 4-28 dBm MAX
VDC DiSEqC OUT
INPUT 5-28 dBm MAX
VDC DiSEqC OUT
12 to 20 VDCAMPLIFIER
POWER
12 to 20 VDC
Slope CompensatedAutomatic Gain 175 to 2400 MHz
PS121000
5SATPL2020v
101ºEVEN
14v 20v22k
14v22k
110/119ºEVEN101º
ODD119ºODD
PS24
2000
24
FLEX
10199
SL5103
110 119 worldDIRECT10195
DC
LAL205aSAT
1
OUT1
OUT4
OUT3 DC
SAT4
SAT3
OUT5
SAT5
OUT2
SAT2
Model LAL205a amplifi ers may be used between
the SL5 LNB and model 5SATPL polarity locker.
The voltages generated
by the polarity locker pass
through the LAL205a to
power the amplifi er and
LNB’s and to polarity lock
the SL5 LNB.
LAL205a (5) IN
PUT A
MPLIFIERS