lamp / ballast / driver training specification sales manager · lamp / ballast / driver training...
TRANSCRIPT
![Page 1: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/1.jpg)
![Page 2: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/2.jpg)
Lamp / Ballast / Driver Training Jeffery Cassel
Specification Sales Manager Mid-Atlantic Region
November 7, 2012
![Page 3: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/3.jpg)
1) Average life under engineering data on instant start ballast with lamps turned off and restarted once every 3 or 12 operating hours as indicated. 2) Average life under engineering data on programmed start ballast with lamps turned off and restarted once every 3 or 12 operating hours as noted.
T8 Portfolio – New Lamp Life Ratings
Products Instant Start1 Programmed Start2
3 hours 12 hours 3 hours 12 hours
T8 700 & 800 Series 24,000 30,000 30,000 36,000
Advantage T8 (High Lumen) 24,000 30,000 30,000 36,000
PLUS T8 (Life) 30,000 36,000 38,000 44,000 T8 Energy Advantage & Value Energy Advantage
25W and 28W 32,000 38,000 38,000 44,000
32W Extra Long Life (XLL) 40,000 46,000 46,000 52,000
Energy Advantage T8 25W & 28W Extra Long Life 40,000 46,000 46,000 52,000
![Page 4: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/4.jpg)
T8 Portfolio – New Lamp Warranty Periods
* Conditions apply - Based on maximum annual burn hours of 5110, use of other equipment (including sensors) will void warranty
Philips Lamp Instant Start Warranty
(3hr/12hr starts)
Programmed Start
Warranty (3hr/12hr starts)
T8 700 & 800 Series 30/30 months 30/36 months
Advantage T8 32W High Lumen 30/30 months 36/36 months
Plus T8 32W 36/42 months 42/48 months
Energy Advantage & Value Energy Advantage 25W and 28W 36/42 months 48/54 months
T8 32W Extra Long Life (XLL) 42/48 months 48/60 months
Energy Advantage T8 25W & 28W (XLL) Extra Long Life
42/48 months 48/60 months
![Page 5: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/5.jpg)
T5/T5HO PORTFOLIO LIFE RATINGS & WARRANTY PERIODS
1) Average life under engineering data on instant start ballast with lamps turned off and restarted once every 3 or 12 operating hours as indicated. 2) Average life under engineering data on programmed start ballast with lamps turned off and restarted once every 3 or 12 operating hours as noted.
Products Programmed Start2 Warranty Period 3 hours 12 hours 3 hours 12 hours
T5HE – 14W, 21W, 28W &35W 25,000 35,000 30 months 36 months T5HE – Energy Advantage 35,000 40,000 36 months 42 months F28T5/800/EA/ALTO 25W
T5HO – 24W, 39W, 54W & 80W 25,000 35,000 30 months 36 months
T5HO – Energy Advantage 35,000 40,000 36 months 42 months F54T5/800/HO/EA/ALTO 49W
T5HO – Extra Energy Advantage 35,000 40,000 42 months 48 months F54T5/800/HO/EA/ALTO 44W
![Page 6: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/6.jpg)
6
1940 1960 1980 2012
PHILIPS/ADVANCE
Osram/Motorola
Motorola
Goldstar
Howard
ESI
General Electric Sola/Delta
Motorola/Magnetek
PLP SLI Valmont
1 2 3 4
MEW/Aromat/VS
Universal MagneTek ULT MEW
Philips Consistency and Performance Over Time
= Ballast Exit
Philips buys Advance 1959
Philips buys EBT 1992
Philips buys Lumisistemas 2001
Philips buys Bodine 2006
1
2
3
4
![Page 7: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/7.jpg)
7
Fluorescent Ballasts
![Page 8: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/8.jpg)
8
Electronic Ballast
![Page 9: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/9.jpg)
9
Lamp Starting Circuits
• Instant Start • Rapid Start • Programmed Start
![Page 10: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/10.jpg)
10
Lamp/Ballast Interaction
phosphors mercury cathode
base
Envelope or tube
emitter
Instant Start Circuits High starting current
No cathode watts! 80% of electronic ballasts
Shorter lamp life (except PLC!)
Rapid Start Circuits Warms cathodes before starting
High starting current Continues to heat cathodes
Rated Lamp Life
Programmed Start Circuits
Ramps up current to provide 700C cathode heating and smooth starting
Longer Lamp Life
LAMP MORTALITY • emitter depletion • starting frequency • starting method
![Page 11: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/11.jpg)
11 11
Ballast Factor ~ ‘Multiplier’…
Ballast Factor • Ballast Factor is the measurement of how much light the
lamps will actually produce when connected to the ballast
• It is the percentage of light output from a commercial ballast vs. light output from a laboratory reference ballast specified by ANSI or ‘Perfect Ballast’
… and it enables “Tweaking”
![Page 12: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/12.jpg)
12
Using the Ballast Factor
2400 3200 4800 6400
Ballast Factor
Lumens
1.00 6000 Lumens /2 lamps 64 Watts Reference
Ballast
1.18 7080 Lumens /2 lamps 72 Watts High Lumen
Ballast
2 F32T8/ADV lamps at 3000 Mean Lumens each Optanium ballasts
Ballast Factor multiplies light output
Light output on a commercial ballast Rated lumens on reference ballast
1.38 8280 Lumens /2 lamps 80 Watts
High Lumen Ballast
.87 5220 Lumens /2 lamps 54 Watts Normal Power Ballast
.77 4620 Lumens /2 lamps 48 Watts Low Watt Ballast
![Page 13: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/13.jpg)
T12 Magnetic to Electronic Conversion
![Page 14: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/14.jpg)
Codes driving change
• EISA • Epact 2007 • Title 24 • Ashrae 2010
![Page 15: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/15.jpg)
15
What’s Driving the Change?
• EPAct Timing: – July 2005 OEM (All fixtures now come with electronic
ONLY) – July 2010 Ballast Manufacturers can no longer sell
magnetic to Distributors • The Window of Change is Closing Quickly
The Energy Policy Act of 2005 (EPAct) and previously enacted DOE legislation set new efficiency standards for T12 ballasts… after July 2010 magnetic ballasts will no longer be Available
![Page 16: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/16.jpg)
16
T12 Electronic Portfolio Application Magnetic Electronic
(1) Lamp Four Foot 34W or 40W R140-TP
V140-TP RELB-2S40-N ICN-2S40-N
(2) Lamp Four Foot 34W or 40W R2S34-TP R2S40-TP V2S34-TP V2S40-TP
RELB-2S40-N ICN-2S40-N
(1) or (2) 60W or 75W Slimline R2E75-S-TP V2E75-S-TP
ICN-2P60-SC
(1) or (2) 95W or 110W HO RS-110-TP VS-110-TP
R-2S110-TP V-2S110-TP
ICN-2S110-SC
![Page 17: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/17.jpg)
17 17
Controllable Ballast Families
![Page 18: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/18.jpg)
Continuous or Step Dimming
• Continuous – Used to maximize energy
savings – Less obtrusive to space
occupants – Typically occupied spaces
• Offices • Step-Dimming
– Use when defined levels known
– Typically unoccupied space • Stairs, Hallways, Restrooms,
Warehouse aisles
Continuous
Step-Dim
18
![Page 19: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/19.jpg)
19
Electronic Controllable
• Line Voltage T8
• 0 – 10 v T8, T5
• DALI
• Step Dim T5 / T5HO
![Page 20: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/20.jpg)
20
Mark 10 Powerline
• No need to pull additional control wires - great for retrofitting existing installations (big labor savings).
• Saves copper (2 wires) for new installations • Also called “Phase Cut” or “Triac” dimming
Dimming through the power leads
![Page 21: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/21.jpg)
21
Mark 10 Powerline Design Highlights
• 100% - 5% full range continuous dimming (T5/HO to 1%)
• Provides up to 65% energy savings over standard fixed output T8 electronic ballasts
• Ease of installation - requires no extra wiring
• Highly flexible and compatible with a wide variety of controls by a broad range of control manufacturers
• Programmed Start operation optimizes lamp life in frequent starting conditions
Standard Wiring
![Page 22: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/22.jpg)
22
Mark 10 Powerline Design Highlights
Lamp ignition at any light setting, including the 5% dim level (1% in T5/HO). No ‘flash’ at ignition.
• Operates above 42 kHz, which minimizes risk of interference with infrared remote control systems and provides continuous flicker-free dimming
• Lamp End-of-Life (EOL) protection circuit (CFL and T5/HO models) safely removes power from lamp at end of life
End of Lamp Life circuit protects ballast and lampholders
![Page 23: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/23.jpg)
23
Mark 7 0-10V
• 100% - 3% dimming range (T5/HO to 1%) • Utilizes 2 low voltage (0-10V) control wires • Great for applications using daylighting or
building management systems
Violet and Grey Control Leads 0-10 VDC
![Page 24: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/24.jpg)
24
Mark 7 0-10V Design Highlights
• 100% - 3% full range continuous dimming (T5/HO to 1%) No ‘flash’ at ignition.
• Provides up to 65% energy savings over standard fixed output electronic T8 ballasts
• Direct operation from a 0-10V DC control signal
• Allows for a single control across multiple branch circuits
![Page 25: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/25.jpg)
25
Mark 7 0-10V Design Highlights
• IntelliVolt® multiple-voltage technology enabling operation at any input voltage from 120 to 277 volts, 50/60 Hz
• Lamp End-of-Life (EOL) protection circuit (CFL and T5/HO models) safely removes power from lamp at end of life
• Programmed Start operation provides extended lamp life in frequent starting applications
End of Lamp Life circuit protects ballast and lampholders
![Page 26: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/26.jpg)
26
ROVR (DALI)
• 100% - 3% dimming range (T5/HO to 1%) • Utilizes 2 low voltage DALI digital control wires
Violet
Control Leads
![Page 27: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/27.jpg)
• Operates directly from DALI control signal
• Utilizes a global standard, giving a choice of compliant controls
• Supports sustainable design principles such as daylight harvesting
• 100% - 3% full range continuous dimming (T5/HO to 1%)
• IntelliVolt® Technology (120 through 277V - 50/60Hz) ensures shipment of correct voltage ballast or fixture for each application
ROVR Design Highlights
Purple Control Leads
27
![Page 28: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/28.jpg)
Optanium Step-Dim Design Highlights
• 100% - 50% step-dimming • Provides a 50% energy savings when
operated at the low step • Ease of installation – uses standard wall
switches • Programmed Start operation optimizes
lamp life in frequent starting conditions • Complies with ASHRAE 90.1 2010
standard for auto-on to 50% occupancy sensors
• Complies with Title 24 2014 for classrooms, warehouses and parking garages
28
T8 Version Available Jan 2013 1 or 2 lamp operation 0.88 BF
![Page 29: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/29.jpg)
Continuous Dimming Three Main Control Options
• Powerline Control – Dimming level controlled through the power leads
• 0-10VDC Analog Control
– Dimming level controlled via an analog control signal
• DALI Controls – Dimming level controlled via a digital control signal
29
![Page 30: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/30.jpg)
30
Philips Control Compatibility Mark 10 Powerline
* Product has a 2-year limited warranty
Maximize energy savings by reducing lighting during unoccupied periods with these Philips controls:
OccuSwitch Wireless • Wireless occupancy sensing • Wireless daylight harvesting and
occupancy sensing • 10-year battery life design* • Wall Switch and Dimmer
OccuSwitch Classic • Wired wall switch and ceiling
sensors • Automated occupancy sensing • Automatic time-out and intelligent
self-adjustment • Mount on wall
![Page 31: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/31.jpg)
Mark 7 0-10V Design Highlights
• 100% - 5% full range continuous dimming (T5/HO to 1%)
• Provides up to 65% energy savings over standard fixed output electronic T8 ballasts
• Direct operation from a 0-10V DC control signal
• Allows for a single control across multiple branch circuits
• Utilize in daylight harvesting applications
• IntelliVolt® multiple-voltage technology enabling operation at any input voltage from 120 to 277 volts, 50/60 Hz
Violet and Grey Control Leads 0-10 VDC
31
![Page 32: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/32.jpg)
32
Philips Control Compatibility Mark 7 0-10V
* Galasiu, A.D. “Energy saving lighting control systems for open-plan office: a field study,” National Research Council Canada, v4 no 1, July 2007 pg. 7-29 ** External installation of class 2 wiring where allowed by local codes
Maximize energy savings by reducing lighting during unoccupied periods with these Philips controls:
MicroLuxSense •Automated daylight •Potential energy savings of
up to 32%* •Regulate up to 20
luminaires •Install in luminaire
LuxSense •Automated daylight
harvesting •Potential energy savings of
up to 32%* •Install in luminaire or clip on
to fixture or T5 lamp**
ActiLume 1-10V •Automated daylight
harvesting and occupancy sensing •Potential energy savings of
up to 65%* •True plug-and-play system •Install in luminaire
OccuSwitch Classic •Automated daylight
harvesting •Automatic time-out and
intelligent self-adjustment •Mount on ceiling
![Page 33: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/33.jpg)
What is DALI? Configuration
DALI is an open architecture that allows flexibility of devices to create a complete lighting system
Each DALI loop can
control up to 64 devices,
each of which is individually addressable
One DALI system allows the creation of up to 16
groups, each of which can have up to 16
settings
System configuration
can be modified without
changing any of the
installation itself
For more information about DALI, consult “The ABC’s of DALI,” available at www.advance.philips.com
33
![Page 34: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/34.jpg)
34
Philips Control Compatibility Daylight Harvesting and Occupancy Sensing
Maximize energy savings by reducing lighting during unoccupied periods with these Philips controls:
ActiLume DALI Lighting Control System
• Automated daylight harvesting and occupancy sensing
• True “plug and play” system • Includes sensor and control
Philips Dynalite Networked Lighting
Control System • Automated daylight harvesting
and occupancy sensing • Flexible zone control • Highly adaptable to changing
needs
![Page 35: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/35.jpg)
35
Electronic HID
![Page 36: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/36.jpg)
36 36
Why eHID?
Regardless of line voltage variations (e.g.
108-305V) Regardless of lamp
voltage rise over life
2. Precise, prescribed starting, warm-up & operation
HID Replacing incandescent Ceramic lamps Value proposition
1. Constant lamp power
![Page 37: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/37.jpg)
37 37
Industry Trends
Yesterday Today Tomorrow
• Continued decreased ballast cost per socket (Lower cost platforms, Multi-lamp ballasts)
• Systems (CosmoPolis, mini MasterColor, Master Color Elite)
• Further miniaturization
![Page 38: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/38.jpg)
e HID Ballasts
• Lamps are continually changing, so ballasts must change with them.
• More than ever, lamp-ballast compatibility is an issue. Be VERY sure. Use ANSI codes.
![Page 39: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/39.jpg)
e-HID Electronic operation is gentler to the lamp. Dimming options available, full and step (50%) Sensors detect overheating and lamp EOL Small size, feature packed, still a little pricey.
![Page 40: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/40.jpg)
Luminaire Based Control
Device controls a 0-10v LED Driver or 0-10v e-HID ballast. Controller is pre-programmed with different levels of light output at different times of night.
Device controls a standard CWA ballast to dim lights to a fixed level for a fixed period of time during the night.
![Page 41: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/41.jpg)
Wireless Telemanagement
Control of Individual Light Points
Reporting and Monitoring is Automatic
Eliminates lamp scouting and calls from annoyed people
Programmable for on/off/dim
Twists into the photocell receptacle
![Page 42: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/42.jpg)
Web Based Telemanagement Lighting is controlled via a manned control station.
Uses existing wiring
One photocell for consistancy.
Lamp failure notification, alarm
Burn hours reporting
Full dimming available
Recording and documentation
Sectors controlled separately based on need
Maximum energy savings
![Page 43: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/43.jpg)
PLUS90 Warranty
![Page 44: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/44.jpg)
44
Philips-Advance Plus 90 Warranty • Exclusive Plus 90 Protection® provides freedom from
concerns about warranty coverage for lighting systems
• Matches the published system warranty of any major lamp manufacturer, fluorescent or HID, and extends it for an additional 90 days
• Give the end-user the freedom to use any major lamp brand-now or in the future
• Warrants both the lamps and ballasts
![Page 45: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/45.jpg)
45
QUESTIONS?
![Page 46: Lamp / Ballast / Driver Training Specification Sales Manager · Lamp / Ballast / Driver Training Jeffery Cassel Specification Sales Manager Mid-Atlantic Region November 7, 2012](https://reader033.vdocuments.net/reader033/viewer/2022050513/5f9dc89aa8314f6b97056fb6/html5/thumbnails/46.jpg)