landscape and irrigation trencher - rotary trencher: trench cutter
TRANSCRIPT
TRENCH’N edge™
Landscape and Irrigation Trencher
“ The only trencher that cleans up after itself!”The TRENCH’N edge™ trencher is the most
versatile of its kind on the market today. It
has a 9 HP engine and an innovative front
pivot wheel which allows the trencher to cut
a 9” radius through the toughest of soils.
This trencher can be used to install irrigation
lines and all types of landscape edging,
such as stone, brick, plastic and modular
concrete edging.
Dual-side discharge into or out of bed so material won’t ruin existing lawns or planting beds.
No clean-up costs means increased profits and happy customers.
1-800-483-3437 | www.trenchnedge.com
“ Eliminate the high cost of clean-up by blowing material directly onto tarps.”
“No clean-up costs means increased profits and happy customers.”
Dual side discharge chute provides flexibility in discharging material 6 to 12 inches away from the trencher. A cutting blade centered between the rear wheels keeps the trench clean and uniform during tight radiuses.
Adjustable depth allows you to change the depth at any time. There is no need to change blades when adjusting the depth.
Wide Shark teeth lower overall maintenance costs by reducing the need to replace an entire blade. A spring-loaded blade allows the blade to float up and over underground obstructions such as rocks and large tree roots.
Circle - Trencher cuts tight circles and curves down to 18” in diameter. Cuts a clean uniform flat bottom trench for concrete and brick edging.
TRENCH’N edge’s patented features make installation quick and easy.
HardscapingInstall any type of rock, boulders, modular concrete retaining walls, brick, plastic or metal edging, and foundation footings. The only trencher to cut multiple side-by-side trenches without filling the existing trench.
IrrigationInstall conventional sprinkler systems, waterlines, draintile, TV and communication cable, low voltage lighting and septic wastewater dispersion piping.
TRENCH’N edge™
1-800-483-3437 | www.trenchnedge.comFor the Edge, Inc. 8028 Hill Trail North, Lake Elmo, MN 55042, USA (651) 777-7923 US Patent No. US05964049
SpecificationsCutting Blade Options
Landscape: Up to 5’’ wide x 6’’ deep each pass - 9 HP
Angled: Up to 5” wide by 5” deep
Irrigation: 2.5” wide x 7” deep each pass - 9 HP Irrigation: 2.5” wide x 12” deep each pass - 13 HP
Sub-surface drip/Low voltage line: 1” wide x 5” deep - 9 HP
Trencher Teeth
Up to 8 replaceable Carbide Bits mounted in forged steel holders or shark teeth for rocky soils
Engine / Speed
9 HP or 13 HP
Up to 35 feet per minute, varies with ground conditions and type of cutting blade
Dimensions
Length: 60” x Height: 31” x Width: 26” - 9 HP Length: 70” x Height: 31” x Width: 26” - 13 HP
Brick edging
Pathways
Retaining walls
SelectEdge
Trenched material onto tarps
Dirt back into trench
Pipe into trench
No mess, no fuss, no clean-up