Laptop/PC GPRS Configuration for Windows XP

Ways of Connecting your laptop

1.Using Bluetooth2.Using data cable3.Using infrared link

Before starting…

1.Subscription to GPRS is a prerequisite

2. Confirm that the handset supports IR reception and same is available on your laptop

3.In case of connecting through data cable, make sure the data cable is attached and the mobile is detected by the computer

Laptop settings • Click on to my computer and then control

panel

Click here

In printer and hardware option• Click on to phone and modem setting

Click on phone & modem

Phone and modem tab• In the modem tab select standard

modem over IR link

Phone and modem option• Click on to dialing rules tab in the

phone and modem option

• Press edit button

Edit button

Edit location• In the edit location window, click on to the general tab• Select tone option• Press ok

Select tone

Phone and modem tab• Click on the modem properties

Click on to properties

Modem properties• Select maximum port speed

Modem propertiesClick on to the advance tab and enter the extra initialization commands:NOTE: Please do not copy paste the mentioned string, Only manual typing is required.

If your system is not being supported the above string then type the following string.

For Post Paid

AT+CGDCONT=1,"IP",“ufone.internet”

For Pre Paid

AT+CGDCONT=1,"IP",“ufone.pinternet”

For U-Mail Account

AT+CGDCONT=1,"IP",“umail.internet”

For Post Paid

AT+CGDCONT=1,"IP",“ufone.internet”;+CGQREQ=1,3,4,3,2,31;+CGQMIN=1,3,4,3,2,31For Pre Paid

AT+CGDCONT=1,"IP",“ufone.pinternet”;+CGQREQ=1,3,4,3,2,31;+CGQMIN=1,3,4,3,2,31For U-Mail Account

AT+CGDCONT=1,"IP",“umail.internet”;+CGQREQ=1,3,4,3,2,31;+CGQMIN=1,3,4,3,2,31

Modem properties• Confirm the correct initialization string,

in order to avoid any errors while connecting

• Click on to the advance port settings

Click here

• In the advance port settings uncheck the use FIFO buffers

• Select the com number currently in use • Press ok button

COM in use

• Click on to change default preferences button• Select port speed to maximum • Select hard ware flow control to none• Press ok and exit modem properties

Max port speed

Flow control to none

Setting up a new dial up connection

• Go to my computer control panel • Click on to network and internet connection

Click here

Click here

• Click on to network connection

• Click on to create a new connection

Click here

• Click on to the next button on the new connection wizard

Click next

• Select connect to the internet option • Press next button

• Select “set up my connection manually”• Press next button

Select

Press next

• Select “connect using a dial up connection”

• Press next

select

Press next

• Enter Ufone as ISP name• Press next

Enter Ufone

Press next

• Enter *99***1# in the phone number field• Press next

• Uncheck the options and leave the fields blank• Press next

• Press next button to finish to complete the connection wizard