Large Animal Housing

www.AllentownInc.com 609-259-7951 © Allentown, Inc. All Rights Reserved

Ferret Unit

Specifications: Installation Options: (opposite side plenums show for clarity)

Features: • Efficient operation • Individually Ventilated Cages • Cage environment isolated from room • Excellent in-cage air distribution • Fully seam-welded stainless steel construction • Clean out panels allow complete wash access • Interfaces with house supply and exhaust air • Fully autoclavable • Unique cage/lid design to allow easy access to cage

environment • Locked cage lid ensure safety and protection of animals

and staff (Optional) • Flip-up/hanging card holder and placement of food

feeder and (2) 16oz. water bottles to one side of the cage improves unobstructed observation

Rack Size*

Cage Size

Animal Capacity Supply Airflow

Exhaust Airflow Positive Negative ACH

Weight

24 Type 4S 15208

48 30 CFM (51 cmh)

23 CFM 38 CFM (39 cmh) (65 cmh)

60 603lbs (273.51ks)

Negative Operation IVC System

Supply Blower / Direct Exhaust

Direct Supply & Exhaust

Note: a.) Airflow at sea-level b.) Rack weight without blowers, animals, bedding or watering c.) Airflow tolerance ±10% d.) *Other configurations available

(101.6mm)

(101.6mm)

(101.6mm)

REV 04/2015

Allentown  products  are  highly  customizable  at  the  end  users  request  and  this  data  sheet  may  not  reflect  the  exact  parameters  specified  for  a  specific  project.    Allentown  recommends  that  projects  that  have  critical  size,  airflow,  water  or  electrical  needs  be  handled  through  approval  drawings  to  insure  all  critical  areas  are  addressed  and  have  visibility  throughout  the  team  including,  A&E,  MEP  and  construction  persons.  

Ferret Unit

Physical Dimensions (rear side plenums):

"B"

"A"

"C"

"D""D"

"E"

Rack Dimensions

Rack Size 24

inches mm

A 66.407 1687 B 69.774 1772 C 34.500 876

D SupplyPak = 9.25in / 235mm

D ExhaustPak = 10.0in / 254mm

Standard design (shown) Watering Bottle

Platform Split

Caster 5” (127mm) Diameter

Supply Blower EFS110

Exhaust Blower EFE113

Supply & Exhaust Blowers

Note: Add 3” (76.2mm) to “A” for 8” (203.2mm) diameter caster

Supply & Exhaust Blowers (Thimble Connect)

(152.4mm)