USER GUIDE

PLEASE READ ALL INSTRUCTIONS CAREFULLY The Tara Laser 2 automated pool measuring system gives you precise accurate measurements quickly and with less setup. Unlike traditional methods of measuring pools, the Tara Laser 2 is fast, reliable and incredibly accurate. The system is simple and effective. Whether you are an experienced pool professional or a novice, you can gather all the measurements you need in a matter of minutes. The Tara Laser 2 delivers the most detailed measurements possible. Eliminate the hassle of traveling back and forth to the job site for more measurements. A quick scan by the Tara Laser, will provide Tara Mfg with all the information we need to create a liner that fits like a glove.

360˚ RadiusAutomated Range - 50 meters Bluetooth iOS Compatible

50m

laser iiTARA

DEVICE AND CONTROLS

Tara Liners & Safety Covers • 256-725-2500 • www.taraliners.com/laser

GoodGoodPoorPoor

1 Charging port: Use only the charger provided with the unit.

2 Power switch3 Connect: Connects the iPad to the Laser 2 unit.

4 Level: Use to calibrate the Laser 2 making sure that the lasers are level from side to side and front to back.

5 Add Photo: Use this to attach the order information and manual measurements by photographing the completed order form.

6 Scan Mode - Fast: Use this mode for perimeter measurements on simple pool shapes. This mode records 800 points in 3 min. 20 sec.

7 Scan Mode - Slow: Use this mode for complex pool shapes, stair and bench measurements. This mode records up to 1600 points in 7 minutes.

8 Stop: Use only if you need to interrupt the scan process before it is complete.

9 Send Data: Use this once you are finished scanning the pool. An email will open. You can include additional information in the body of the email. Send the email to complete your order.

SAFE OPERATING PROCEDURES 1. DO NOT look into the laser beam and DO NOT unnecessarily aim at other persons.

2. DO NOT open the unit. Doing so, will void the warranty and requires the unit to be returned to Tara Manufacturing for recalibration.

3. No user serviceable parts inside.

4. As this is a precision instrument, it should be transported and carried in its case and handled with care at all times.

5. DO NOT immerse the device in water or other fluids.

6. Wipe off dirt and smudges with a damp tissue or soft, clean, lint-free cotton cloth.

7. DO NOT use aggressive cleaning agents or solutions.

8. Whenever possible, store the device in a dry, shady location.

USE1. Measuring Conditions

(a) The optimal measuring condition is in the morning or evening and if the walls of the pool are in shadow.

(b) Measuring errors can occur when the target surface reflects too intensely (e.g. a mirror) or insufficiently (e.g. black fabric), or the ambient light is too bright.

2. Laser Spray (a) In a standard 32 oz. spray bottle, add 5 or 6 drops of white finger paint and then fill with water. Use this spray along the

walls of the pool at the same height as the laser.

(b) A fine mist works better than a stream. It’s best to avoid runs for the best scan.

1

3

4

5

67

8

9

2

Lighting Conditions

2. Device Preparation (a) Charge Laser before use.

(b) Set up the tripod near the center of the pool. If the tripod is sitting on the slope, put two of the legs on the downside for stability.

(c) Try to locate a spot where the laser will be as perpendicular as possible to all the walls of the pool. Ex.1

(d) Attach Laser to tripod.

(e) Verify all sides of the pool wall are visible from the laser location.

(f) Using a bubble level on the top of the laser unit adjust the tripod so that the laser device is level.

(g) Laser can experience interference from reflections on the walls of the pool. It is best to use the laser when the sun is low or the sky is overcast.

3. Pool Preparation (a) Drain pool and remove liner and any material attached to pool wall.

(b) Coat the pool wall with neutral reflective surface (laser spray). Ex. 2

(c) Identify break lines and place triangle markers at these break points. Ex. 3

5. Prior to Scanning (a) Before running the laser, find your manual pool measurements. Manually measure the shallow end and deep end depths, side walls, back walls and any other features.

(b) Record all measurements on the Tara Laser 2 order form and fill out the form completely. Ex. 4 Download Tara Laser 2 order form at www.taraliners.com/forms.

(c) Take a physical measurement, of the shallow end break, using a tape measure and record this measurement on the order form.

4. Scanning the Pool (a) Turn Laser power switch on. Ex. 5

(b) Start the Tara Laser 2 App on the iPad.

(c) In the App press the Connect button. Ex. 6

(d) In the App press the Level button. The laser will rotate 90° and stop. Check to make sure the lasers are equal on each side of the pool.

(e) Repeat this to make sure that the lasers are level for the front and back of the pool.

(f) Force quit the App

(g) Then restart the App and press the Connect button again

(h) Press the Add Photo button and take a picture of your manual measurements. Ex. 7

(i) Scan either Fast or Slow. The iPad display will change from the Control Screen to begin showing the pool perimeter Ex. 8. A fast scan will be finished in 3 min. 20 sec. and record up to 800 points. A slow scan will take just under 7 minutes and record up to 1600 points.

(j) When the scan is complete then press the Send Data button. An Email will open. Add any additional information and Send the email.

(k) Power down the Laser. The iPad will send the email when it connects to the internet again.

LINER ORDER FORM - TARA LASER

2294 Old Highway 431 • Owens Cross Roads, Al 35763Ph: (256)725-2500 or (866)725-8272 • Fax: (877)333-8272

w w w . ta r a l i n e r s . c o m

Wall

Floor

Dept

h

Length

SAFETY LEDGEq

SKETCH THE SHAPE OF THE POOL

COVEq

(in.)

WALL: (in.)

(in.)

DEPTH: (in.)

LENGTH: (in.)

DEPTH AND WALL MEASUREMENTS

MANUAL MEASUREMENT (SHALLOW END BREAK)

IMPORTANT! PLEASE INCLUDE ONE MEASUREMENT, OF THE SHALLOW END BREAK, TAKEN WITH A

TAPE MEASURE TO CHECK THE ACCURACY OF THE OVERALL MEASUREMENT.

JK

N EMLIG

View FromDeep End

H

(J) : (ft.) (in.) SHALLOW END

(K) : (ft.) (in.) DEEP END

(G) : (ft.) (in.) SIDE WALL 1

( I ) : (ft.) (in.) SIDE WALL 2

(L) : (ft.) (in.) BACK WALL

X

X

Y

X

Y

Y

(Y): (in.)

(X): (in.)

q q q1 2 3

1

2

3

q6" RADIUS

qRADIUS

qDIAGONAL

INCHES

q45º

q90º

q90º

q90º

(in.)

VINYL STEP

STEP CORNERS

SET BACK

FLOOR

qNO

qNO

qNO

THICKNESS

qYES

qYES

qYES

ROD POCKETS

BEADED STEP

FOAM

INDICATE POSITION OF VINYL STEP IF APPLICABLE

STEP DETAILS

DO NOT INCLUDE STEPS ACROSS THE WIDTH OF THE POOL IN THE OVERALL LENGTH “B” MEASUREMENT

(in.) (in.)

INSIDE CORNER (TRUE L & T-SHAPE POOLS)

Date: Due:

DEALER Company: Address:

Contact: ______________________ Phone: ___________________ E-Mail:

DISTRIBUTOR Company: Address:

Contact: ______________________ Phone: ___________________ E-Mail:

SHIPPING INSTRUCTIONS Branch: q Dealer: q Pick Up: q

Ship Via: Other: ORDER INFORMATION

PO #: Job Name: Price: Serial #: Stock #: Sidewall Pattern:

Bottom Pattern:

MOUNTING Beaded: q Overlap: qOverlap Size:

COMMENTS

CITY

CITY

STATE

STATE

ZIP

ZIP

For Additional Order Forms visit, www.taraliners.com/forms

INCHES

2294 Old Hwy. 431, Owens Cross Roads, AL 35763

Ex. 2

Ex. 5

Ex. 7

Ex. 8

Ex. 6

Ex. 3

Ex. 4

Ex.1 In this example the device should be set back from the exact center, to capture the inside radius of the kidney.

Tara Laser II

LIMITED WARRANTY AND LIMITATION OF LIABILITYEach Tara Laser 2 is warranted to be free from defects in material and workmanship under normal use and service. The warranty period is up to and including 90 days from the receipt of shipment. Parts, product repairs, and services are warranted for 90 days. This warranty extends only to the original buyer or end-user customer of a Tara Laser 2 authorized reseller, and does not apply to fuses, disposable batteries, or to any product which, in Tara Manufacturing’s opinion, has been misused, altered, neglected, contaminated, or damaged by accident or abnormal conditions of operation or handling. Tara Manufacturing warrants that software will operate substantially in accordance with its functional specifications for 90 days and that it has been properly recorded on non-defective media. Tara Manufacturing does not warrant that software will be error free or operate without interruption. Tara Manufacturing’s warranty obligation is limited, at Tara Manufacturing’s option, to refund of the purchase price, free of charge repair, or replacement of a defective product which is returned to a Tara Manufacturing within the warranty period. To obtain warranty service, contact Tara Manufacturing (2294 Old 431 Hwy., Owens Cross Roads, AL, 256-725-2500) to obtain return authorization information. Then send the product as instructed, with a description of the difficulty, postage and insurance prepaid (FOB Destination). Tara Manufacturing assumes no risk for damage in transit. Following warranty repair, the product will be returned to Buyer, transportation prepaid (FOB Destination). If Tara Manufacturing determines that failure was caused by neglect, misuse, contamination, alteration, accident, or abnormal condition of operation or handling, including overvoltage failures caused by use outside the product’s specified rating, or normal wear and tear of mechanical components, Tara Manufacturing will provide an estimate of repair costs and obtain authorization before commencing the work. Following repair, the product will be returned to the Buyer transportation prepaid and the Buyer will be billed for the repair and return transportation charges (FOB Shipping Point).

THIS WARRANTY IS BUYER’S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TARA MANUFACTURING SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS OF DATA, ARISING FROM ANY CAUSE OR THEORY. Since some countries or states do not allow limitation of the term of an implied warranty, or exclusion or limitation of incidental or consequential damages, the limitations and exclusions of this warranty may not apply to every buyer. If any provision of this Warranty is held invalid or unenforceable by a court or other decision-maker of competent jurisdiction, such holding will not affect the validity or enforceability of any other provision.

Tara Liners & Safety Covers • 256-725-2500 • www.taralaser.net

TROUBLESHOOTINGLaser stops in the middle of a measurement: Sometimes the laser will pause for a second to calibrate. Allow it 5 - 10 seconds to complete the calibration process.

Laser stops and won’t continue for longer than 10 seconds: A strong glare from the pool walls, can interfere with the laser and cause it to freeze. Try shading the wall of the pool where the laser is measuring. If this doesn’t work wait to measure the pool when conditions are not as bright.

Laser device can not connect to App: The laser connects via Bluetooth signal to an iPad or iPhone. If the distance between the laser and the iPad or iPhone is too great it will loose signal. Try moving the iPad or iPhone closer to the laser.

Sharp spikes on the diagram display: The surface is too bright or reflective and is interfering with the laser.

For all other issues call Technical Support, 256-725-2500. Never attempt to open the case of the laser!

LASER CLASSIFICATIONThe Tara Laser 2 generates a visible laser beam that is emitted from the front of the device. The device complies with laser class 2 according to:_ IEC60825-1: 2007 Safety of laser products_ EN60825-1: 2007 Safety of laser products

Laser class 2 productsDo not look into the laser beam and do not unnecessarily aim at other persons. The eye is usually protected by preventive reactions such as the eyelid closure reflex.

WORKING SPECIFICATIONSRange 6 inches to 100 feetMeasuring accuracy Typ.: ± 0.12 in*Laser class 2Laser type 635 nm, < 1 mWBattery run time: up to 4 complete pool measurementsTemperature range:- Storage (-13°F to +130°F)- Operation (32°F to +90°F)* Under favorable conditions (good target surface, room temperature) up to 10 m (33ft). Under unfavorable conditions such as bright sunlight, a weakly reflecting target surface or large temperature fluctuations, the deviation can rise causing errors or shutdown of the unit.

laser iiTARA