laser tracker tooling - metrologyworks · laser marked serial number for traceability certified...
TRANSCRIPT
Precision Machining
Three Point Contact
Hardened Stainless Steel or Anodized Aluminum
Custom Parts Possible
Laser Marked
Serial Number for Traceability
Certified and Traceable
Features
Americas, [email protected]: 816-650-2266
[email protected] Phone: +49 30 21 78 05 67
Precision Machined
Laser Marked
Standard Drift Nest
Pin Nest Configuration
Bolt Down Drift Nest
Three Point Contact
Laser Tracker TOOLINGTS2019-385-A
Specifications
0.875”0.5”
1.5”
We Offer the Following Standard and Metric Pin Sizes
Custom Offsets and Pin Sizes Also Available
Common Offsets Include: 1”, 0.5”, 0.3125”, 25mm, 12mm, 10mmAvailable Pin SizesStandard16ths Decimals1/83/161/41/4-20 Thread5/163/87/161/25/83/47/81
0.1250.18750.2500.250 0.31250.3750.43750.5000.6250.7500.8751.000
Magnet, Yes or No
Offset
Pin Size (eg. 0.125”)
Part Specific (eg. Ball Probe Seat)
Material, Z = Stainless Steel / Y = Aluminum
Size, A = 1.5”, B = 0.875”, C = 0.5”
Bulls
eye
Tool
ing
BT - A - Z - BPS - x125 - 1 - Y
Part Number Selection & Laser Tracker Tooling Sizes:
Metric4mm5mm6mm8mm10mm12mm
www.MetrologyWorks.com27208 East 24 Highway Buckner, MO 64016
Edge Nest Configuration
Threaded Configuration
Custom Colors Available
Laser Tracker TOOLING