lasit - catalog products and accessories

Summary

+39 081 536 88 55

Lasit Team .................................................................About Us ...................................................................Our history .................................................................Quality and experience ...............................................Technology and Innovation ........................................Being a Lasit customer..............................................Installation and training ............................................

04060810111213

FiberFly ......................................................................FlyAir Green ...............................................................FiberFly Green ...........................................................FlyAir Series ..............................................................FlyCO2 .......................................................................

1618192022

Laser for integration

MiniMark ...................................................................MicroMark .................................................................TowerMark ................................................................TowerLight ................................................................TowerMark XL ...........................................................CompactMark ............................................................FlexyMark ..................................................................FlyLabel .....................................................................RotoMark e RotoMark-X ...........................................RotoMark-L e RotoMark-XL ......................................FlyGantry ...................................................................PenFeeder .................................................................RollerCoaster .............................................................Sarema ......................................................................FlexyLink ...................................................................FlyGear ......................................................................

26283032343638404244464850525456

Marking machines

Special Machines ........................................ 58

Our Company

02 | Summary

www.lasit.it

Metal sheet tightener ................................................Rotating axis .............................................................. Rotating axis with direct coupling ...........................Tilting rotating axis .................................................. Rotating head ............................................................XY tables ...................................................................Reflex vision system .................................................TTL vision system ....................................................

6263646566676869

Accessories

FlyCAD .......................................................................FlyControl ................................................................... Custom Software .......................................................

727475

Software

Our samples 76

Summary | 03

LASIT S.p.A.Laser Marking Systems

Via Solferino n. 4, I-80058 Torre Annunziata (NA) Italy Phone: +39 081 536 88 55 Fax: +39 081 536 10 99 Toll-free number: 800 821 577 Mail: [email protected]

USA office : 508 989 5090/ 508 528-2542 [email protected]

Lasit Headquarters 82

+39 081 536 88 55

Lasit TeamOur team at your service

04 | Lasit Team

www.lasit.it

Lasit Team | 05

About Us The Lasit AdvantagesSince 1990 Lasit has designed and manufactured standard and custom machines - including highly complex systems with automation - for laser marking and engraving. Over the years Lasit has continued to offer the highest level of technology with a sizable research and development department that has led to many new developments and releases in state of the art equipment. Developments include mechanics, automation, hardware and software. Lasit has been able to analyze all production requirements for the customer and apply practical and innovative solutions meeting customer requirements for both customary and specialized projects. With over 20 years in the industry and a sizeable engineering team made up of mechanical, electrical, software and applications engineers, Lasit is able to both design and manufacture a full range of systems for marking and engraving, deep cutting and precision micro-piercing. Lasit manufactures its products entirely on-site, by using only high quality components offering long life and reliability. Lasit provides a comprehensive laser laboratory to its customers offering R&D and feasibility studies for specific applications with a broad range of lasers for testing from C02, Fiber (short and long pulse), CW, Green, Vanadate and UV. A detailed scientific report is provided with all testing parameters to recommend the best solution.

Our strengths Custom solutions - Standard Components Lasit is able to provide both simple and complex robotic solutions with a wide range of workstations from basic desktops to more advanced workstations with programmable XYZ, rotary indexers, 5 C collets, 3 jaw chucks, rotary dial tables, automated pick and place , and sophisticated conveyors and lifts. Lasit uses high quality standard components that have been selected carefully over the last 20 years. Lasit takes full responsibility for the entire projectLasit not only builds complete systems but also provides full responsibility for the integration. Complete integration services include system analysis, laser samples, CAD design, electronics and optics, software, interfacing with ERP and DB, and an engineering workshop. From design to final completion we are able to identify specific needs and build to specific requirements. In the market since 1990 With over 25 years of experience by providing more than 2,400 customers worldwide and producing more than 3,500 machines, we are able to support and meet even the most demanding requirements.

+39 081 536 88 55

06 | About Us

+2,400Customers in the world

+3,500Machines produced

53Countries served

1990Inception of Lasit

Other Lasit SystemsLasit manufactures and supplies laser marking systems globally for both small and medium businesses as well as Fortune 500 companies.47% of Lasit’s machines are installed abroad. Lasit provides sales and service international with subsidiary headquarters in Sweden, France, Benelux, Hungary, Germany, USA, India and Israel.

www.lasit.it

About Us | 07

Our history Continual growth

1991

1992

1993

1995

1998

1990

1990 – Lasit is born on June 26 by visionaries who decided to bring to market new technology not yet available - Gabriele Clementi, Marco Ievoli and Candida Colonna.

1991 - The first 3 axes scanning head with electronic control of focus has been designed and built

1992 - Lasit manufactures its first laser marking system by integrating a CO2 source with 100Watts manufactured by El.En

1993 - The first Nd-Yag laser entirely designed and built in Lasit has been delivered to the Hofmann company of Monza for the marking of orthopedic prostheses. In the same year the management system of the machine with DSP was introduced: an tremendous innovation for those times

1995 - The first specific machine (Commissioned by the Beretta Armi) was built to mark the gun barrels on non-planar surfaces

1998 - Standard machines FlexyMark and EasyMark were born developed based on a modular hardware concept

2000 - Laser diode is developed in the R & D lab and it is now offered as an alternative to the lamp-pumped one

2000

+39 081 536 88 55

08 | Our history

2004

2005

2006

2007

2008

2013

2003 - At the EMO in Milan FLY is presented, the firstdiode laser completely modular and scalable in power. In the same year Lasit obtains the ISO 9001

2004 - The Milan office is opened to better providemanufacturing and support

2005 - At the Laser 2005 Monaco FlyAir is presented,a pumping axial laser with modular construction

2006 - In collaboration with the Institute ILT of Aachenthe new Laser with MOPA architecture is manufactured

2006 - Lasit integrates the first active fiber lasers.Lasit has become one of the world market leaders in Fiber technology.To date Lasit is by far the greatest fiber laser integrator for marking in Italy

2007 - LasitUSA was founded to develop and to follow and support the American market

2008 - Lasit expanded to a new and larger headquarter office in Torre Annunziata

2010 - Laser integration on the anthropomorphic robots

2013 - Implementation of the exclusive system of telephone reception “Olivia”

www.lasit.it

Our history | 09

Quality and experience+39 081 536 88 55

10 | Quality and experience

Quality Control of every product is part of the Lasit business model during every aspect of production.• Employment of measuring systems of all the mechanical parts designed and manufactured to verify precision down to microns

• The use of Laser interferometer to verify the precision of the movement of the axes installed in our systems

• Conoscopy for sub micrometrical measures of micro-machinings made with laser (depth)

• Testing with Electron microscope for the evaluation of the quality of marking in detail

• Vision and Camera Equipment for DataMatrix and Barcode Verification

Mission: Lasit is committed to the continuous evolution of laser technology in serving the market and dedicates at least 20% of the revenues for R& D each year. This recurring investment in research and development provides the highest quality levels for manufacturing with state of the art equipment.

Technology and Innovation www.lasit.it

Technology and Innovation | 11

Lasit provides quick response with high level diagnostics support both in the field and remotely: • Remote control of our systems with technology TeamViewer and Webex technology

• Tracking of all requests for assistance with our CRM tracking software

• Phone system designed and built to reduce stress and waiting time, which automatically routes the customer to the appropriate department head

• WebTV system has transformed Lasit into a virtual TV studio where all calls are interactive and live with TV screen viewing and audio for on-

going support, service, and training or discussions. Customers can now enter the Lasit factory remotely through the WebTV system and can

have virtual live tours, see machines in progress, receive additional training and work directly with any of the engineering departments regarding

software, mechanical, or electrical. As part of the after-sale service WebTV allows Lasit to provide incomparable support for the maintenance

and assistance for the use of the laser

Lasit strives to be one step ahead offering state of the art products and the highest quality customer care

+39 081 536 88 55

Being Lasit customerWhat matters most is our customers

Our Services include:• Installation and customized training courses for the use of the different laser systems • Immediate telephone support - even during evening hours and on public holidays • Maintenance contracts, standard or specially tailored to customer needs • Mechanical, electronic and software engineers available to customers for on-going support

on new and pre-existing machines• Spare parts and accessories always available for an immediate delivery • Remote connection available for customer machines with technology

TeamViewer - WebTV with internet access

Customer Service 24 hours a day7 days a week

12 | Being Lasit customer

www.lasit.it

Installation and Training Our laser marking systems are installed by skilled laser technicians with many years of experience. To facilitate the customer an “Installation Guide” is sent with the directions on how to unpack and to move the machine properly, the electrical requirements and compressed air requirements.

More precisely, the following information is provided:

• Dimensions and weight of the various components of the laser marking system with the layout of the suggested location• General requirements which include the power supply specifications, any compressed air, water to be used for the cooling system

(in the case of water-cooled laser and integrated chiller) • Specifications for external safety interlock circuits

The installation of the system is performed following a default schematic, by using an innovative software system that allows creating a customized use course, accessible and reproducible at any time by the operator.

Installation procedure and training:

• Start (start-up) of the system • Demonstration and instruction on the operation of the laser • Demonstration and instruction on the various functions of the marking software (FlyCad) • Demonstration and instruction on the various functions of the monitoring and control software (FlyControl) • General maintenance and training of troubleshooting to resolve any possible malfunctions that could occur• Instruction and connection tests TeamViewer - WebTV for any tele-assistance• Safety Training • Marking tests with drawings and laser parameters. Parameters optimization and manufacturing parameters• Questions and Answers • Testing and system final acceptance

Being Lasit customer| 13

+39 081 536 88 55

Laserfor integration

14 | Laser for integration

www.lasit.it

Laser for integration | 15

+39 081 536 88 55

FiberFly

FiberFly uses the most innovative technology at with active fiber doped with Ytterbium. It is the ideal laser solution for precision marking, micro-machining and cutting of plastic and metal materials. The fiber technology has provided extraordinary leaps in laser technology: The expected laser life provides more than 100,000 hours of marking due to the use of “single emitter” diodes as well as the fully integrated design and construction of the optical components. In order to guarantee additional protection against overvoltage or power blackouts, Lasit an interference filtration system. This design is standard on each FiberFly system that is built. The real effectiveness is verified by a noise generator. Moreover, a flexible stainless steel tube protects and guides the connection cables as well as the optical fiber. An additional layer of steel armour cabling further protects the cables. This tube of diameter 25mm minimizes the possibility of accidental breakage and it creates additional protection against any electromagnetic interference or electrostatic discharge. The marks created with the FiberFly system are accurate, indelible and have no environmental impact whatsoever, unlike inks and chemicals.

Power 10-20-30-50-100W

16 | FiberFly

www.lasit.it

Technical Specifications Power 10-20-30-50-100W

Technology Active fiber laser dopedwith Ytterbium

Wavelength 1060-1070 nm

Beam quality M2 < 1.8 (measured and real)

Pulse frequency from 20 KHz to 200 KHz (1MHz optional)

Pointing laser (laser sighting) The red laser diode coaxial provides a way to pinpoint exactly where the part will be marked. The visual guide helps to align precisely where the mark will be placed on the workpiece

Electrical connection 110-230 Vac (L+N+Gnd) 50-60Hz

Maximum absorption 180W, 200W, 250W, 400W

Cooling Air cooled for 10-20-30-50WWater cooled for 100W

Interconnection cable Stainless steel armoured ø25mm length 3 mt

Operating temperature 15°C – 35°C withoutcondensation

• Active fiber technology

• 100,000 hours of marking

• Precision Marking

• Protective steel cable FiberFly | 17

+39 081 536 88 55

FlyAir GreenFlyAir Green is a solid state laser (active material YVO4 ), with a pumping axial and duplication crystal of the laser beam inside the cavity. The laser beam that is generated has a wavelength of 532nm and is characterized by green light. The laser module is completely sealed, assembled and pre-aligned in a White Room. The FlyAir Green system is made up of two bodies connected through a steel shroud: a drawer that contains the management electronics and a group of components by including the laser source and the scanning unit. This shroud is essential for the protection of the cables and prevents damage caused by bending or accidental pressure or crushing to the shroud. The system is air cooled to ensure a constant temperature - the diode is mounted on a Peltier cell. This type of laser is ideal for all plastics marking; transparent parts in general, and for laser processing in the solar/photovoltaic industry.

Power 6W

Technology Laser Nd: YV04 diode-pumped

Wavelength 532 nm

Beam quality M2 < 2 (measured and real)

Pulse frequency from 10 KHz a 100 KHz

Pointing laser (laser sighting) Green laser diode coaxial within the laser beam, with marking area simulation to aid the positioning of the part to be marked


Maximum absorption 250W

Cooling Air

Interconnection cable Stainless steel armoured ø25mm length 3 m

Operating Temperature 15°C – 35°C without condensation

Technical Specifications

18 | FlyAir Green

www.lasit.it

FiberFly Green

Technical Specifications Power 10-50W

Technology Active fiber laser doped with ytterbium

Wavelength 532 nm

Beam quality M2 < 1.8 (measured and real)

Pulse frequency from 10 KHz a 600 KHz

Pointing laser (laser sighting) Green laser diode coaxial to the laser beam, with marking area simulation to aid the positioning of the part to be marked


Maximum absorption 250W

Cooling Air

Interconnection cable Length 3 meters


The FiberFly Green system uses the same innovative technology of the FiberFly system (active fiber doped with Ytterbium) with the integration of a duplication crystal wavelength. The pulse duration of the FiberFly Green laser is 532 nm. The minimum duration is 1 ns and the working frequency is 600 kHz. The FiberFly Green life expectancy is more than 100,000 hours of on time marking due to the “single emitter” diodes and the fully integrated construction of the optical components. Each laser has an interference filtration systems which provides additional protection against over voltages and power blackouts. The effectiveness of this filtration system is verified by a noise generator. The Green FiberFly system is ideal for marking opaque, translucent and transparent plastic materials. Many of these materials that can be laser processed are used in the solar/photovoltaic industry, backlit “night & day” buttons and panels as well as micro-machining type applications.

FiberFly Green | 19

+39 081 536 88 55

FlyAir SeriesUnico Compact

20 | FlyAir Series

www.lasit.it

Technical Specifications Power 5-10-20W

Technology Laser Nd: YV04 diode-pumped

Wavelength 1064 nm

Pulse duration 4 - 40 ns

Laser Pointing The red laser diode coaxialprovides a way to pinpoint exactly where the part will be marked.The visual guide helps to alignprecisely where the mark will be placed on the workpiece.


Maximum absorption 180W, 200W, 250W, 400W

Cooling Air

Interconnection cable Armoured stainless steel ø25mm length 3 m


The Unico and Flyair Compact systems are solid state lasers for marking characterized by the generation of the laser beam within the cavity. The active material is YVO4 (yettrium orthovanadate neodymium-doped) with axial pumping diodes. The laser module is completely sealed, assembled and pre-aligned in the Clean Room. The two models - Unico e Flyair Compact are the same laser source: what differentiates them is the structure and the placement of the components inside. Unico has been developed as a single unit. This provides the smallest footprint, but optimal scanning over the widest area with easy and quick integration. The FlyAir Compact system, instead, is designed in two bodies connected through a steel cordon: a drawer that contains the management electronics and a group of components including the laser source and the scanning unit. In situations when the weight of the laser must be considered, this design offers an ideal solution by minimizing the overall weight.Both systems provide increased stability. Furthermore, the design of the diode connected directly to the cavity prevents any risk in rupturing the transport fiber The air cooling is to ensure a constant temperature, and the diode is mounted on a Peltier cell. This type of laser is ideal for personalization type marking in which you can provide shades of gray – such as ID cards and marking of plastics.

FlyAir Series | 21

+39 081 536 88 55

FlyCO2

FlyCO2 is the solution for marking plastic and natural materials such as plexiglass, paper, wood, stone, textiles, and marble. The laser system is extremely compact, modular and can fully integrated into any production line.The system is designed for high productivity while at the same time reducing operation costs. It can be completely integrated into productions lines to interface with existing PLC systems with communication via RS232 or TCP/IP available with the Client/Server design and the use of digital signals. According to depending on the power/model, the source is of a sealed type and then the supply with external gas is not necessary. Depending on the power/model, when the source is a sealed laser, then there is no requirement for external gas.When the source is semi-sealed, a refill can be simply with the replacement of a pressurized canister that provides the proper mixture of gases. The current C02 laser systems in production range from 10 W to 70 W with both air cooed and water cooled depending on the power. Depending on the specific application (marking, annealing cutting, sintering, drilling, deep engraving) Lasit offers a broad range of lasers. This is an RF source with the resonator integrated in the laser tube. The scanning unit is available with two or three axes. The two axis with a flat field lens or the three axis with a prescan lens with a dynamic Z. The two-axis scanning unit uses a pair of high speed and high accuracy galvanometers, with the drivers and the control electronics - in SMT technology - integrated inside the head itself which is also sealed to prevent mirror contamination.

With two axis scanning unit and Pre-Scan

22 | FlyCO2

www.lasit.it

The three axis scanning unit - Pre-Scan - is ideal for large marking areas (up to 1m x 1m) where high accuracy is required or in cases where to carrying out re-coupling is not convenient. The dynamic Z, characterized by an optical system mounted on a linear motor, maintains a perfect and constant laser beam.The Gaussian, concentric laser beam ensures efficiency and high quality marks. This system enables the operator to vary the laserfocus without moving it along the Z axis. The entire system with allthe necessary electronics are housed within the scanning head.An overpressure design prevents any contamination of the opticsand the mirrors.

FlyCO2 | 23

+39 081 536 88 55

Marking machines

24 | Marking machines

Marking machines www.lasit.it

Marking machines | 25

+39 081 536 88 55

MiniMark

The MiniMark laser system is a Class 1 fully enclosed system that can be installed on any desk. It is compact, silent and available with the full range of fiber, C02, and Green lasers.The system complies with the latest CE and USA FDA, CDRH regulations. The laser is fully integrated into the structure, minimizing space requirements.The MiniMark comes with a convenient manual door and with a viewing glass to allow a clear view of the marking field. There is an option to add one or two side doors to be able to easily insert pieces that are longer than the entire width of the machine. The standard marking area is Ø140mm but it is possible to install lenses with a different focal length to increase the field from Ø87mm to Ø220mm. The laser can be moved along the Z axis supporting work pieces up to 200 mm in height. The axis movement can be both manual and motorized with integrated encoder and completely programmable from the PC.The motorized Z axis offers a Joystick as well which together when used with the SmartFocus can increase productivity by providing quick focusing and alignment of area to be marked.The motorized z facilitates quick positioning and focus providing optimal marking on flat surfaces, cylindrical parts as well as complex geometries with curves and varying angles.

26 | MiniMark

www.lasit.it

Layout Technical Specifications Working position Seated - work bench

Working plane dimensions 550 x 400

Max weight on the plane 40Kg

Markable max height (ø 140mm) 200mm

Available marking areas ø100, ø140, ø220

Options which can be installed C axis, drawer, side door

Type of laser FiberFly, FlyAIR, FlyGreen, CO2

Vision system Possible - not recommended

Type of engine Up to 2 motors with encoder

Joystick At lever for controlling Z axis

Type of door Manual

Exhaust fan and filter Optional – which can be integrated

Software FlyCAD - FlyControl integrated

Pc and monitor Supplied by Lasit but separate

Total weight 110Kg

Power supply 110-230 Vac - 50Hz

MiniMark | 27

+39 081 536 88 55

MicroMark

The MicroMark is a Class I laser marking station.The MicroMark is a fully enclosed compact desktop system fully CE and USA CDRH certified. The MicroMark comes with a convenient manual door and with viewing glass to allow a clear view of the marking field. The standard marking area of the machine is Ø140mm but it is possible to install lenses with a different focal length to increase the field from Ø87mm to Ø220mm. The laser can be moved along the Z axis supporting work pieces up to 200 mm in height. The axis movement can be both manual and motorized with integrated encoder and completely programmable from the PC. The motorized Z axis offers a Joystick as well which together when used with the SmartFocus can increase productivity by providing quick focusing and alignment of area to be marked. The motorized z facilitates quick positioning and focus providing optimal marking on flat surfaces, cylindrical parts as well as complex geometries with curves and varying angles.

28 | MicroMark

www.lasit.it

Layout Technical Specifications Working position Seated - work bench





Options which can be installed C axis, rotating head,drawer, side door




Joystick At lever for controlling Z axis

Type of door Manual folding door

Exhaust fan and filter Supplied by LasitWhich can be integrated

DMX player Optional

Pc and monitor Supplied by Lasit but separate

Weight 100Kg

Power supply 110 - 230 Vac - 50Hz

MicroMark | 29

+39 081 536 88 55

TowerMark

The TowerMark is an extremely versatile marking system and can be used both manually and in combination with a robot for loading/unloading. All components are housed inside the cabinet below which is part of the main structure. The system can be moved easily with a pallet jack or is also available with wheels. The door can be both manual and pneumatic. The large viewing glass and interior lighting system provide a clear view of the objects to be engraved and simplify their positioning. The working area is 620x450mm and the marking area ranges from 100mm up to ø310mm depending on the choice of lens (100mm, 160mm, 254mm, 320mm, 420mm). The Z axis, operated by the FlyCAD marking software provides for marking of various thicknesses from 0 to 450 mm. The motors with encoder feedback can also be controlled via the Joystick and the SmartFocus providing instantaneous focus. With these features the operator can easily find the correct position and focus on all flat, cylindrical and complex geometries with curves and special angles. Another optional feature is a special pull out drawer to speed up the loading and the unloading of the pieces to be engraved. Other special options include a rotary axis (rotary indexer, 5 collet, through hole rotary) providing another axis for the continuous marking of cylindrical parts, a rotating scan head for the marking of cylindrical and angled parts up to 90 degrees, and a table with a 300 mm stroke to increase the working area.

30 | TowerMark

www.lasit.it

Layout Technical Specifications Working position Stand up




Available marking areas ø100, ø140, ø220, ø310

Options which can be installed C axis, rotating head, X table,metal sheet tightener


Vision system Optional both TTL and Reflex


Joystick Option

Type of door Manual or pneumatic

Exhaust fan and filter Integrated into the base - optional

Pc and monitor Integrated into the baseand monitor holder

DMX player Optional

Weight 300 Kg


TowerMark | 31

+39 081 536 88 55

TowerLightTowerMark Light is a marking system that is mainly characterized by its pneumatic door. The working area is easily accessed and centering of the marks is convenient even with complex part. The door closing control is located on the control console: which is equipped with an anti-crushing system, it closes safely. Upon closing the door, the marking cycle starts and after the marking, the door opens automatically with safety interlocks. If a pneumatic system is not needed, a manual hinged door is available as an options. The marked area is always well visible with the door closed due to the large viewing glass and internal lighting system. All the components are housed in the structure (including the exhaust system). The working plan is 620x450mm and the marking area can be from ø100mm up to ø220mm depending on the lens installed. The Z axis, operated by the FlyCAD marking software, provides for marking of parts from 0 to 350mm high. The motors have encoder feedback and can also be controlled with a joystick which works in conjunction with the Smart Focus system. These features allow for instant focus which saves time in marking different parts of varying geometries. This system can be used with all surfaces including flat, cylindrical and curved shapes or corners.The system allows the operator to find the correct position and focus for optimal marking without spending time to find it manually.Another useful feature is a rotating axis (rotary indexer) for wrapping marks, logos, text around cylindrical parts. Logos can be seamlessly marked around the curved surface. In addition, both standard and custom rotary axes are available with through hole collets, 5 collets with grippers for heavy or large diameter parts, and 3 Jaw chucks. Sheet metal clamps and tighteners with automatic advancement are available with the system to secure materials when cutting metals such as gold and silver or other.

32 | TowerLight

www.lasit.it






Options which can be installed C axis, rotating head,metal sheet tightener


Vision system Optional reflex

Type of motors Up to 4 motors with encoders

Joystick Option



Pc and monitor Integrated into the base and monitor holder

DMX player Optional

Weight 325 Kg


TowerLight | 33

+39 081 536 88 55

TowerMark XL

The TowerMark XL is a larger version of the TowerMark which can be configured with many options and axes for marking and cutting.It is characterized by its exceptional flexibility. The system is available with many features that allow you to expand the capability of the machine XY tables, programmable Z axis, rotary indexer (chuck or 5 c collet), and an optional rotating scan head for wrapping text on multiple cylindrical parts). The FlyCad software allows you to mark multiple lines of text, logos, data matrix, bar codes. The oversized enclosure provides increased through put with the ample space for marking large parts or marking large arrays of parts in trays. The programmable Z axis has a stroke of 450 mm in the standard system but can be expanded to 700 mm if needed.The TowerMark XL can be equipped with X and Y tables with a stroke of 300x300 mm. The tables are operated by DC stepper motors.The rotary indexer (C axis) provides for marking or wrapping text, logos, around cylindrical parts. This rotary axis is controlled by the computer and FlyCad software. The software and rotary indexer are uniquely designed to automatically mark on inclined parts, conical shapes without having to reposition the parts or the marking head.

34 | TowerMark XL

www.lasit.it





Available marking areas ø100, ø140, ø220, ø310

Options which can be installed C axis, rotating head, XY tables,sheet metal tightener/clampsfor auto adjustment



Type of motor Up to 5 motors with encoder

Joystick Up to 3 axes


Exhaust fan and filter Optional



TowerMark XL | 35

+39 081 536 88 55

CompactMark

Compact only in size but big in performance, the CompactMark is a multi-functional center for laser marking. Made entirely of welded steel, and precision machined with ground ways and ball screws, it is configured with 3 standard positioning axes that can be expanded to 9 axes with optional “C” axis, rotating head, palletized pick and place or conveyors. The precision and rigidity of the CompactMark featuring a marking area of 560x400mm or larger, provides the greatest accuracy when tight tolerances are required. The system is designed to engrave one part, an array of parts, as well as an entire pallet with hundreds of parts while maintaining repeatability, accuracy and perfect centering. The table can support parts weighing up to 150kg. The Z axis, operated by the FlyCad marking software, allows us to mark different thicknesses up to 400mm. All motors feature integrated encoders which can be controlled via a 3-axis joystick. This state of the art Smart Focus Technology enables the operator to utilize the preview function and immediately focus and center with no effort to begin marking. The CompactMark is available as both a standard or customized system with varying sizes to meters with optional full gantry and smaller footprint as well as other automated options including palletized and robotic pick and place systems, multiple rotary axes, vision systems for recognition, centering and verification, and conveyors. The system is pre-designed to accept a fume exhaust filtration system depending on materials to be marked.

36 | CompactMark

www.lasit.it




Markable max height 460mm/400mm/285mm


Options which can be installed C axis, rotating head,sheet metal tightener

Type of laser FiberFly, FlyAIR, FlyGreen



Joystick Option

Type of door Pneumatic

Exhaust fun and filter Optional


DMX player Optional

Total weight 490Kg

Power supply 110-230 Vac - 50Hz

CompactMark | 37

+39 081 536 88 55

FlexyMark

The FlexyMark system offers great flexibility in marking providing ample space for both large, complex parts as well as large trays with arrays of parts. The system comes with a wide access pneumatically controlled door, a pull-out type drawer for quick and easy access to parts, and a modular perforated table for easy fixturing of parts, and an optional rotary device for marking or wrapping of logos on cylindrical parts. The machine is ergonomically designed for operator ease of use during extended periods of operation.The optional pass through provides easy access to move parts through without opening the door. The machine comes standard with and X stroke of 800 mm and a Z stroke of 300 mm. A rotary indexer (“C” axis) can be added for marking text or wrapping logos, data matrix, bar codes, around cylindrical parts. In addition and optional Rotating Scan head (theta axis) can be added for marking conical shapes or multiple cylindrical shapes. All the axes are driven by motors configured with encoders controlled by FlyCAD software. The machine offers high accuracy and repeatability due to the rigid structure and Bosch structural frame profile. It is further reinforced with strong powder coated steel brackets. The X axis is constructed of precision ground steel on which the guide rails are mounted.The precision ball screws offer exceptional accuracy. The close looped motors are controlled by encoder.

38 | FlexyMark

www.lasit.it

Layout Technical Specifications Working position Upright/Operator can

stand or sit with stool




Available marking areas ø140, ø220

Options which can be installed C axis, rotating head, drawer




Joystick Option


Exhaust fan and filter Optional – which can be integrated


Pc and monitor Provided by Lasit but separate

DMX player Included

Power supply 400 Vac - Trifase - 50/60Hz

FlexyMark | 39

+39 081 536 88 55

FlyLabel

The FlyLabel is a laser system designed to automatically mark different size plates, labels, or tags. The standard version offers 4 loaders each of which can hold up to a thickness of 0.5mm. The processing is automated as the laser runs along the X axis. The X axis is motorized and has a stroke of 800mm. Upon marking one tag, the laser automatically moves to the next position to mark the next tag. This system is also available as a pick and place system in which the labels, tags, plates are flipped one by one as the are released from a magazine and presented to the marking area. The laser marks the part, then automatically discharges the part into one of 10 collection trays or magazines. The data management of the marking can be tailored to specific needs for each application. The data can be taken from a database, from an Excel spreadsheet, as well as a simple text file properly formatted. The FlyLabel system is also equipped with a motorized Z axis. With this additional axis, the machine can also be used as a traditional marking system compensating for varying heights and thicknesses of other types of parts.

40 | FlyLabel

www.lasit.it


stand up or sit on stool

Max weight on the table 110Kg

Markable max height 200mm

Available marking area ø220

Options Removable plane



Joystick Optional


Exhaust fan and filter Integrated into the base cabinet


DMX player Optional

Weight 850 Kg

Power supply 110 - 230 Vac - 50/60Hz

FlyLabel | 41

+39 081 536 88 55

RotoMark and RotoMark-XRotoMark is a system equipped with a rotating table with a mechanical cam which has from 2 to 8 workstations. It allows marking of both small and large parts by loading and marking at the same time. The ability to load and unload while marking optimizes machine on time and helps to facilitate increased production. The rugged construction of the table mechanism provides faster speed, precision and repeatability over years of use.RotoMark X offers index tables with 2 or 4 position combining the advantage of the loading and unloading at the same time. It also incorporates an X axis with a stroke of 500 mm effectively creating a marking area of 100 x 600 mm or 150 x 650 mm depending on the appropriate lens. RotoMark X is designed for the highest productivity and can be optimized for individual part marking, an array of parts, or a very large part. The programmable motorized Z axis, operated by the FlyCAD marking software provides a significant range in focus to be able to mark from 1 to 200 mm. The motor with encoders can also be controlled by the Joystick.The exhaust fan is housed inside the marking system. A proprietary pneumatic device is integrated in the system to optimize the suction nozzle for increased efficiency in marking.

42 | RotoMark e RotoMark-X

www.lasit.it


stand up or sit with stool

Working plane dimensions ø1000

Max weight on the plane 20Kg (10kg per workstation)




Vision system Optional but not recommended


Joystick Included


Exhaust fan and filter Optional, which can be integratedinto the base cabinet



DMX player Included

Weight 520 Kg


RotoMark e RotoMark-X | 43

+39 081 536 88 55

RotoMark-L and RotoMark-XL

RotoMark-L is the first machine that combines the advantage of the load/unloading at the same time. The system is available with 4 to 8 positions for marking. The table diameter is available up ot 1500 mm and can include an X axis for positioning of the laser head. The X axis stroke can be from 200mm up to 500mm providing a marking area from 150x650mm or 280x780mm depending on the appropriate lens. RotoMark-L is ideally designed for high productivity for large arrays of parts to be marked at one time. It can also be used for marking single parts or larger parts. The machine can be operated both automatically with the index table or manually from the back door.The table has a rugged industrial cam mechanism with a long life which provides high speed marking, precision and repeatability over time. There are optional optical barriers available to protect the table. The programmable Z axis, controlled by the FlyCAD software, together with the pneumatic door has a long stroke which provides for marking parts from 0 to 400 mm in height. The exhaust fan is housed inside the marking system. A proprietary pneumatic device approaches the nozzle as it marks a part creating optimal efficiency in marking. The operating panel can be adjusted and is positioned close to the workstation either in the front or the rear depending on customer requirements.

44 | RotoMark-L e RotoMark-XL

www.lasit.it



Working plane dimensions Ø1500 (optional Ø1600)

Max weight on the plane 5 kg for station

Markable max height 400mm with lens 310

Available marking area ø220, ø310

Type of lasers FiberFly, FlyAIR, FlyGreen

Vision system Optional


Joystick Included


Exhaust fan and filter Optional, can be integratedinto the base cabinet



DMX player Optional

Weight 2200 Kg


RotoMark-L e RotoMark-XL | 45

+39 081 536 88 55

FlyGantry

The FlyGantry is a high performance machine made of tubular welded steel. The system offers unparalled precision with guide rails and recirculating ball screws and 3 positioning axes in the standard machine. The system can be expanded to 5 axes with the addition of the C axis (for marking around the circumference of cylindrical parts) and a rotating scan head (for marking on inclined pieces with different angles, sides, heights, or varying geometries). The rugged steel structure provides faster acceleration without any vibration. This rigidity of the system offers dimensional stability over time. It also maintains accuracy even when machine may be moved or re-located or impacted accidentally. The working area of the FlyGantry is 800 x 500 mm. The systems can be used for marking/engraving very large and tall parts as well as groups/ arrays of parts on a pallet all at one time. The programmable Z axis, operated by FlyCAD marking software can mark parts from 200 to 300 mm. All the motors are integrated with encoders and can also be controlled with a 3 axis joystick.A prorietary exclusive SmartFocus feature makes focus and centering of the marks instant. An preview feature allows operator to see area to be marked as well.

46 | FlyGantry

www.lasit.it

Layout Specifiche TecnicheWorking position Upright/Operator can






Options which can be installed C axis, rotating head


Vision system Optional- both TTL and Reflex


Joystick Included





DMX player Optional


FlyGantry | 47

+39 081 536 88 55

PenFeeder

The Lasit Automated Pen Feeder marking system is designed for laser marking pens or other cylindrical parts (barrels) automatically. This high speed system provides hours of use unattended by placing a large volume of pens into a hopper and then having them come out the other end fully marked. The system orientates and then rotates each pen and logos, text can be marked in a linear fashion or wrapped around the circumference of the pen (or cylindrical part). This revolutionary marking system reduces operator time to load and unload pens into a rotary device speeding up production. The first zone of the system aligns and orients the pen in the same direction. The pen travels along and is then rotated 360 degrees to wrap information around the circumference. This system can be equipped with a one laser or two lasers within the same system for greater productivity. The programmable Z axis, operated by the FlyCAD marking software, provides for marking parts with various thicknesses. Marks can be longitudinal lines of text of continuous seamless logos 360° around the pen.

48 | PenFeeder

www.lasit.it






Options which can be installed Rotating axis


Vision system Both TTL and Reflex


Type of door Manual



DMX player Optional

Weight 655 Kg

Power supply 380 Vac - 50/60Hz

PenFeeder | 49

+39 081 536 88 55

RollerCoasterThe RollerCoaster system is an automatic laser marking system with a closed loop line for the machining of work pieces placed on a pallet. These parts can be cylindrical placed in pallets that continuously travel through the line, are indexed to be marked and then are automatically unloaded. The overall dimensions as well as the numbers of pallets can be customized and defined based on the production needs of the customer. Cylindrical parts are loaded quickly into the fixture with varying diameters and the pallets move around in a loop to be marked and unloaded. The marking area has a built in stop to index the pallet which consistently produces accurate, precise, repeatable marks. The programmable and motorized Z axis controlled from a PC provides for automatic marking on the same pallet with parts that have varying heights. Once the marking is completed, it can be downloaded automatically with a rollover system. The line speed is then adjusted by an inverter. The system can be installed with different types of lasers according to the material to be marked and a vision system can be integrated. The operator loads the pieces on the several pallets and he starts the cycle: the first pallet - and then all the other pallets in a continuous loop - is transported in the marking chamber to be indexed and marked. The pallet with the marked pieces is then released and it passes into the automatic discharge station where it is overturned and the marked pieces run on a specific slide while the empty pallet returns to the loading station. The system is available with a full range of laser systems depending on the material to be marked. An optional vision system can be integrated as well. The pallets are loaded prior to marking and the laser starts to mark each pallet in a continuous loop. Each pallet is transported to the marking chamber to be indexed and marked. After the marking is completed the pallet is released and then passes to the automatic discharge station (if included in the system) where it continues in the loop on a slide and returns to the loading station.

50 | RollerCoaster

www.lasit.it

Layout Technical SpecificationsWorking position Upright operator can

stand up or sit down





Options which can be installed C axis, rotating head


Vision system Optional Reflex


Joystick Included

Type of door Manual and pneumatic



DMX player Optional

Weight 325 Kg


RollerCoaster | 51

+39 081 536 88 55

Sarema

Sarema is a system that provides for automatic marking and recognition of 8 to 12 crankshafts at one time. The system offers programmable motorized X, Y, and Z axes which are controlled by the PC. X (1000mm), Z (100mm) and Y (30mm). This systems can simultaneously mark 5 shafts all of which can be loaded at the same time. Given the considerable weight of these parts, a convenient slide-out table is employed to load each shaft. Each station has a plate with a bearing support for the centering and the rotation of the shaft which is then locked into position with a pneumatic system. The operator presses the start button which triggers the closing of the pneumatic door with sensors. This automatic process facilitates pulling data from a customer database, marking the part with the data and reading and verifying the mark. During this automated process the operator can be loading and unloading the other shafts.This optimizes machine on time providing the greatest through put.

52 | Sarema

www.lasit.it

Layout Technical SpecificationsWorking position Stand up


Available marking areas ø140

Fixed focus / ability to install shafts up to 12 cylinders

Type of laser FiberFly

Type of motor 2 motors with encoder


Exhaust fan and filter Integrated into the base


DMX player Included

Weight 650 Kg

Power supply 110 - 230 Vac - 50/60Hz

Sarema | 53

+39 081 536 88 55

FlexyLink

FlexyLink is a laser mark system that is integrated into an actual transport line or conveyorized line. The line can be customized for any application, material and required speed to process.Multiple conveyors are available from belts, rollers or metallic chains. The system can be configured with any type of laser from fiber, green, C02 or UV. The system is configured with programmable XY and Z axes with a range of strokes depending on the quantity and application. A pneumatic stop system or a vision system provides the correct position for the mark with recognition and centering.The vision system can also be used for OCR verification of the text and for reading and/or verification of a datamatrix.

54 | FlexyLink

www.lasit.it






Vision system Optional Reflex


Joystick Included

Type of door 2 pneumatic doors and a manual one



DMX player Optional

Weight 830 Kg


FlexyLink | 55

+39 081 536 88 55

FlyGear

FlyGear is a specially designed automated system for marking conical gears. The gantry configuration is equipped with programmable XYZ motorized axes with a stroke of 800x600x250 mm and with an optional rotating scan head. The machine is also equipped with two loading and unloading stations located on opposite sides. This ergonomic design provides an ease of use for repetitive jobs. The loading and unloading is with two motorized tables with a rack mechanism. This enables the operator to work on two stations independently from one another.The control cabinet and the PC box are both air-conditioned to optimize performance even in extreme climates. The system has a manual front sliding door with and inspection viewing glass.The operator is protected by side barriers. He is able to load parts, selecet a corresponding program and start up the marking cycle.The motorized table then advances into the marking chamber with a pneumatic door that closes. It is possible to automatically mark both the shaft and the gear on the head. At the end of this cycle the second pneumatic door opens and the table comes out and parts are ready to unload.

56 | FlyGear

www.lasit.it





Available marking areas ø140

Options which can be installed Rotating head


Vision system TTL optional


Joystick Included




DMX player Optional

Weight 1250 Kg


FlyGear | 57

Special Machines

Lasit is one of the few companies that offers over 25 years of experience with both laser technology as well as 3D CAD design, electronic design, optical design, software development, clean room applications, FEA, in an environment with multiple workshops with 7 CNC machines and laser cutting. Engineering is often able to find economical solutions that offer the simplest and most functional operation for each application. This is a result of many years in developing custom products that eventually become standard.

In addition to the wide range of standard products developed since 1990, Lasit designs and manufactures customized systems for virtually any application.

+39 081 536 88 55

58 | Special Machines

In addition the software for the control of the laser and the marking of the parts has all been developed in house.This allows us to customize the software when necessary. All applications are considered on an individual basis to find the best solution. We take into consideration the type of material, the depth of the marks, the environment, passivation, salt spray testing, whether the part will be outside in a harsh environment or not.

Whenever possible standard components are used even with custom solutions. Many custom solutions including handling systems, XY tables, rotating spindles with varying resolutions, rotating scan heads, conveyorized loading/ unloading systems, pick and place, warehouses, stackers, vision systems SLR or TTL (through the lens), reading systems and datamatrix verification have been integrated into our products and have become standard products in many cases.

www.lasit.it

Special Machines | 59

+39 081 536 88 55

Accessories

60 | Accessories

www.lasit.it

Accessories | 61

+39 081 536 88 55

Metal sheet tightener

This accessory is an option used for cutting thin sheets of material. The sheet is stretched through pneumatic clamps controlled with electric valves. It provides continuity in cutting and marking the sheets as an electric motor moves the sheet forward through the clamp.The pneumatic clamp closes to keep tension on the sheet.The software controls the position of the sheet and is able to both advance and stop sheet movement.

Technical SpecificationsMin. thickness sheet 0.1 mm

Max. thickness sheet 3 mm

Min. width sheet 10 mm

Max. width sheet 130 mm

Weight 8.3 Kg

62 | Metal sheet tightener

www.lasit.it

Technical SpecificationsResolution 39,936 steps/rev

Chuck Pneumatic/Manual

Ø Chuck 80, 100 (STD), 120, 160

Chuck center height from the plane 93.5 mm

Through hole On demand

The rotating (W) axis provides marking on cylindrical parts with ease and precision. It offers the highest resolution and accuracy with seamless marking or wrapping of logos/drawings around the circumference with 39,936 steps/revolution.The W axis provides for complete rotational marking in conjuction with the programmable Z axis for any diameter. Both the W and Z axis are programmed to work in conjunction with one another around any size diameter.The heart of the mechanism is the worm gear which is precision ground and finely machined offering smooth, consistent movement with no interference. The assembly is completely sealed with high level components providing a long life. The rigidity and robust construction optimizes the precision in rotation even with heavy or unbalanced loads with high inertia.A tailstock feature is available for marking long, thin or very heavy parts. The tailstock is mounted on precision ground guides that provide forward and backward movement of the chuck itself. The tailstock lock offers great flexibility and can be both mechanical (manual) or pneumatic. The rotary is available as a standard 3 jaw chuck or a 6 jaw chuck as well as special rotaries for higher loads and larger diameters.

Rotating axis

Rotating axis | 63

+39 081 536 88 55

Rotating axiswith direct coupling

The rotating axis with direct coupling is ideal for marking small parts when 360 degree marking is required. This rotation is rapid controlled with intuitive FlyCAD software. Customized fixtures are available depending on specific requirements.The motor with encoder and the chuck are connected with a bearing system. This system prevents overloading the motor shaft which in turn provides greater reliability and durability.

64 | Rotating axis with direct coupling

www.lasit.it

Tilting rotating axis

The tilted rotating axis is the ideal solution for marking cylindrical, conical, or hexagonal parts. This proprietary design has evolved from the original rotating axis which is well suited for the machining of small and medium sized parts. An angle notches ring allows for simple and precise tilt adjustments of the rotating axis. The system is essential when marking conical parts or when marking inside cylindrical parts. The marking process both around and inside the ring is managed by the FlyCAD software. The clamps are activated by a convenient ring nut. The part is grabbed both internally and externally. This axis is useful in the jewelry industry when markng rings, bracelets and other types of industrial rings.

Tilting rotating axis | 65

+39 081 536 88 55

Rotating head

It is possible to rotate the laser scanning head with the rotating head mechanism while at the same time maintaining the beam alignment and centered marking.The head can mark from above the part as well as at a 90 degree angle from the side.This flexibility in the position of the head eliminates the need for complex fixturing.Without any re-positioning, the operator is able to mark two opposite sides of a part,a cylindrical surface, or an inclined surface. The rotation can be either manual or programmable controlled by the PC. The manual system can be with a graduated scale or with positioning fixed points. This system is easily operated by a lever positioned on the side of the laser head.The components that comprise the motorizedrtating head are the gearbox and motor with encoder both of which provide high accuracy and repeatability. The rotating head is most commonly used at +/- 90 angles.

66 | Rotating head

www.lasit.it

XY tables

The robust industrial XY tables are designed and manufactured to insure high precision in motion control with rigidity that offers optimum performance over time. The structure is designed from a single block of milled and perforated aluminum providing for accuracy and precision in the guide system. The highest quality Schneeberger components are used in the construction.All guides, runners, recirculating balls, screws and nuts comply with Star ISO 5 or ISO 7 depending on the type of application. All axes are accurately tested for precision and straightness and are further verified with a Renishaw laser interferometer. The motors can be stepper with encoder or brushless with CNC control. Strokes range from 100x100mm to 600x600mm as well as longer for customized systems. Other options include welded steel plates that are both stretched and milled with strokes up to 1200x700mm, leveling feet and larger, wider but rigid working areas.

XY tables| 67

+39 081 536 88 55

Reflex vision system

The vision system FFL (SLR) enables the operator to view exactly what is being marked with great detail. This is largely due to the fact that the optical path from the camera to the marking plane does not pass through the optical elements which can cause aberrations. The camera has a high quality CCD sensor (Charge coupled device).Sizes vary depending on the required field of view. A full range of lenses is available to provide the highest resolution and the best possible contrast. The lens incorporates a filter to completely shield the light scattered by the source during the laser marking.The mechanism of the reflex mirror moves on tempered and ground guides with high precision. Repositioning is immediate and repeatable.The optical system is designed to protect it against contamination and dust by completely sealing the mirrors inside a the chamber.

68 | Reflex vision system

www.lasit.it

The vision system TTL (through the lens) is the ideal solution for centering and positioning the marks on very small pieces such as an eyeglass screw with extreme accuracy and high definition are required. A high definition camera (CCD-chard coupled device) is placed before the scanning unit to follow the same optical path of the laser. This technology allows the operator to view exactly what will be marked. It aids in centering the marks. The camera management software, fully integrated in FlyCAD allows operating in numerous modes: vision only, manual centering vision, automatic centering vision. In the automatic centering mode the system identifies, focuses and automatically directs the text or the drawing to be marked. This process occurs by choosing the “area” mode for the recognition of the photo created as a model or “edge” which provides centering through Pattern recognition. The vision system is supplied with a flexible lighting system tailored for each specific application. The TTL vision system is the ideal solution for recognition of small parts, when needing to center marks on the head of a screw for medical implants and other fine detailed parts. The viewing area is a maximum of 30x20 mm.

TTL vision system

TTL vision system | 69

+39 081 536 88 55

Software

70 | Software

www.lasit.it

Software | 71

+39 081 536 88 55

FlyCAD

FlyCAD, created in a Windows environment employs the concept WYSIWYG (what you see is what you get). The simplicity and flexibility of FlyCAD allows the system to incorporate all the information necessary for marking (power, frequency, etc.) into one single file .dwg or .dxf. This can include any combination of True Type text, serial numbers, bar codes, datamatrix, logos, etc.The software also controls the management of the movement of up to 9 axes. As FlyCAD continually evolves all updates and upgrades are free to our customers for the life of the machine. Our software engineering team is also able to create fully customized software, graphics and interface. The software can load dynamic data, manage a customer data base, and control all automation.

Simple, intuitive, flexible“It adapts itself to every customer need”

72 | FlyCAD

www.lasit.itTechnical informationFully customizable: Ability to interface practically with all communication protocols(TSP, TCP / IP, RS232, PROFIBUS, etc.) File Import: With FlyCAD it is possible to draw directly, or import textsand / or drawings of any kind of format (DXF, DWG, PLT, AI, PDF, EPS, BMP), and if necessary, to change them. Accuracy: Ability to carry out lines, polylines, arcs, circumferencesand fillings.Font: Full support for TTF fonts also in oriental language Text: Text with scalable fonts. Horizontal and vertical writing mode. Text aligned to the left, right and center, or justified. Marking text in rotation with the option to set the radius, angle of departure and final. Bar code: Code 128, EAN8 and EAN13, code 39, code 2 of 5and others on request Dmx: Fully compatible with the AIM specifications.Date automatically: date generations based on a format completely configurable by the customer in any language. Integration with the axes: replication feature available in conjunction with XY tables so that you can mark a pallet of pieces automatically. Split: functionality available in conjunction with XY tables. The program will automatically “cut” a bigger drawing of the working plane in several parts.At the end of this operation performed in real time, the machine positions the XY tables so as to mark the first square and then it passes to the next square to cover the total area to be marked. In this way the marking area includes the entire table. Parameters: database with processing parameters of materials. able to store thousands of different parameter sets. Counter: option to count the number of marked pieces and to receive a warning at the end of the process

FlyCAD | 73

+39 081 536 88 55

FlyControl

The FlyControl program integrates within the monitoring software of the subsystems that form the marking system. A user layered system allows to access to the different sections of monitoring, configuration and control. With FlyControl the user can monitor the FiberFly structure, when necessary, to control the functionality. FlyControl is the graphical representation of all the settings of the marking system, it allows the modification in a simple and intuitive way or, if necessary, the identification of any kind of anomaly.

Management and diagnostics of different types of motors: - RS232 with integrated encoder - RS232 Stepper - MECHATROLINK Omron - Pantec Eagle

Measurement and automatic dimensioning of axes stroke. Management and remote diagnostics of a potentially infinite number of lasers. Ability to create one or more accounts with different access permissions and settings. Backup and Restore of all machine settings easily and quickly in a single file SQL SERVER.

74 | FlyControl

www.lasit.it

Custom Software

Custom Software | 75

In certain applications, when it is necessary to directly import of load machining programs from and existing customer database, the software can read the data base by reading the bar code or the datamatrix.FlyCAD is able to provide OCX controls and .NET libraries which offers complete software customization.In cases where there is not in-house software personnel available, Lasit will help to provide all the necessary expertise in customizing the software. It is possible to design software applications that can control the entire production process through simple and intuitive graphical interface.All this is achieved without losing the important advantages of standard software such as automatic data backup. Our team is ready to provide any level of customized software for your specific application offering a full range of solutions; from simple GUI, to the complete integration into a production system with data interchange in a customer database and production cycle management.

+39 081 536 88 55

Our samples

76 | Our samples

www.lasit.it

Our samples | 77

+39 081 536 88 55

78 | Our samples

www.lasit.it

Our samples | 79

+39 081 536 88 55

80 | Our samples

www.lasit.it

Our samples | 81

+39 081 536 88 55

82 | Lasit Headquarters

Lasit Headquarters

From Napoli Capodichino airport in 20 minutes Choose the A3 Napoli-Salerno highway. Head south towards Salerno / Reggio Calabria and follow the signs or the “Penisola Sorrentina” to the exit of Castellammare di Stabia.

How to reach us: By car Along the A3 Napoli-Salerno highway head south towards Salerno / Reggio Calabria and follow the signsfor the “Penisola Sorrentina” and exit to Castellammare di Stabia.

By trainFrom the central station of Napoli by the Circumvesuviana towards Sorrento stop “Pompei Villa dei Misteri”

Lasit is located in outside Naples, near Pompeii, Italy in an area rich in history, with spectacular views of the Mediterranean sea, a gentle sunny climate, and with some of the world’s greatest foods. We welcome a visit to our factory to tour our recently expanded company and spend some time enjoying the natural beauty that surrounds us.

www.lasit.it

Lasit Headquarters | 83

LASIT S.p.A.Laser Marking Systems

Via Solferino n. 4, I-80058 Torre Annunziata (NA) Italy P. Iva 02747991210

Telephone: +39 081 536 88 55Fax: +39 081 536 10 99

Toll-free number: 800 821 577Mail: [email protected]: www.lasit.it

Milan Office

Via Martiri Della Libertà, 29/A 20875

Burago Di Molgora (MB)

United States Offices

623 Old West Central StreetFranklin, MA 02038

Telephone: 001 (508) 528-2542 or 508 989 [email protected]

lasit - catalog products and accessories

Documents

rotating axis

lasit s

lasit team

lasit customer

rotating head

e rotomarkxl

laser marking systems

machines special machines