lateral technology 2009/10 marine catalogue here!...phone: (03) 9772 9019 fax: (03) 9773 8641...

LLAATTEERRAALL

Manufactures & Agents forIndustrial & Marine Solar Technology Systems,

Navigation Aids & Maintenance

PLASNAV BuoysPLASNAV Day Marks

Marine BeaconsLeading Lights

Mooring systemsSolar jetty lighting

Solar panelsBatteries

Marine lamps

Phone: (61 3) 9772 9019, Fax: 9773 8641 Mobile: 0428 278 707Email: [email protected]

Web: www.lateraltechnology.com.au© Lateral technology 2009

Marine Navigation Aids

T E C H N O L O G Y

Phone: (03) 9772 9019 Fax: (03) 9773 8641 Mobile: 0428 278 707Email: [email protected]

Web: www.lateraltechnology.com.au

Lateral Technology 2009

NAVIGATION DIVISIONPRODUCTS & SERVICES

SEALITE (AUS): Navigation Beacons and equipment (Exclusive Vic. Distributor).

VEGA (NZ): Navigation Beacons and equipment (Victorian Agent).

TIDELAND (USA): Navigation Beacons and equipment.

CR CONTROLS (USA): Navigation Beacons and equipment.

LATERAL TECHNOLOGY Manufactured: "PLASNAV" ™ Rotor moulded plastic DayMark System & Accessories (Suits all common Navigation Beacons).

LATERAL TECHNOLOGY: "PLASNAV" ™ Rotor moulded Buoys & Tide staffs

MARINE LAMPS: All types.

SENSON: VPCI marine corrosion inhibitor products.

PECAN SOLAR STREET/AREA/JETTY LIGHTING

TELEMETRY POLES, Power Supplies, and Equipment

INVERTERS: All sizes, types & brands.

SOLAR PANELS: distributor for BP Solar, KYOCERA, UniSolar & SHARP

BATTERIES: Neuton, Sonnenschein, Concorde & Century Yuasa FLA, SLA, & GEL

BATTERY CHARGERS: Including Marine standard.

SOLAR REGULATORS: All sizes including special Marine.

LATERAL TECHNOLOGY manufactured: “SENSTART II" electronic Remote Start &mains failure generator starting systems.

WIND GENERATORS: Marine, Commercial & domestic, (inc. for beacons).

DESIGN, CONSTRUCTION, INSTALLATION & MAINTENANCE:

Lateral Technology, provides sales, spares and maintenance services toall Navigation aids & solar power supplies. Design & construction ofLeading & PEL Lights etc. inc. towers, engineering comps etc.Conversion of lights to LED light source, and design and construction ofone off specials. Lateral Technology will be happy to design andmanufacture custom devices related to any of the above or any otherremote power applications.

All it needs is some Lateral Technology!All specifications and prices in this catalogue subject to change without notice.




PPLLAASSNNAAVV BBUUOOYYSSALL LATERAL TECHNOLOGY PLASNAV BUOYS MANUFACTURED TO ISO 9002 QA STANDARDS

Starboard Hand BuoyDIMENSIONS: 1 Mtr. Diameter x 1900 mm. LOA.

Available with or without ballast, spin weld fitting in top for pouring ballast280-mm. Diameter top flange with cast in Beacon mounting holes.

Moulded in Stainless steel becket, c/w 316 stainless shackle.Available in any standard colour.

Available with Sealite SL70 Navigation Beacons

Model shown: - CODE: LT-SB (G)





PORT HAND BUOYDIMENSIONS: 1000 mm. Diameter.

1250 mm. body height (1850 mm. LOA.)Internal capacity – 750 litres

Top flange with cast in industry standard Beacon mounting holes.Moulded in Stainless steel becket, c/w 22 mm. 316 stainless bowe shackle.

Available with or without ballast or D.Y.I ballast.Available with Sealite SL70 Navigation Beacons

MODEL CODE: LT-PB (R)





55//1100 KKnnoott ((yyeellllooww)) oorr NNoo BBooaattiinngg BBuuooyy ((rreedd))DIMENSIONS: 1 Mtr. Diameter x 1600 mm. LOA.

280-mm. Diameter top flange with cast in Beacon mounting holes.Moulded in Stainless steel becket, c/w 22 mm. 316 stainless shackle, and

hydrophobic valve.Available in any standard colour with or without graphics.

Mould in graphics to specification.Available with Sealite SL70 Navigation Beacons.

Able to support large chain sizes reducing maintenance costs significantly.





Marine Park Marker BuoyDIMENSIONS: 1 Mtr. Diameter x 1600 mm. LOA.

280-mm. Diameter top flange with cast in Beacon mounting holes.Moulded in Stainless steel becket, c/w 16 mm. 316 stainless shackle.

Available in any standard colour.Mould in graphics to specification.

Available with Sealite SL70 Navigation Beacons

Model shown: - CODE: LT-PVMP (Y)





Cardinal BuoysDIMENSIONS: 1 Metre. Diameter x 2.2 Metres above water line.

5 Metres. O.A. Length.C/W Top Marks & counterweight.

All 316 stainless steel shaft & fittings.Available with Sealite SL70 Navigation Beacons & mounting plate to suit.

MODEL CODE: LT-CB (N), (S), (E), or (W),





IALA Special MarkDIMENSIONS: 1 Metre. Diameter, Beacon 2.2 Metres above water line.

5 Metres. O.A. Length. All stainless 316 constructionC/W Top Marks & counterweight

Available with Sealite SL70 Navigation Beacons & mounting plate to suit.

Model shown: - CODE: LT-SM (Y)




PPLLAASSNNAAVVDay Mark System

Specification Sheet.

CODE: LTDM S/H(G)STARBOARD HAND MARK (GREEN)

Dimensions: Diameter 1 Mtr. x 600 mm. High.100 mm. Aluminium central reinforcing tube with

Industry standard pattern flanges both ends.(accepts all common Navigation Beacons)

(Shown with 350 mm. Sealite Beacon mount,and 450 mm. industry standard bolt pattern extension.

CODE: LT-DM P/H(R)PORT HAND MARK (RED)

Dimensions:800 mm. Diameter

850 mm. High. (1000 mm. LOA.100 mm. Aluminium central reinforcing tube with

Industry standard pattern flanges both ends.(accept all common Navigation Beacons)

(Shown with 350 mm. Sealite Beacon mount,

CODE: LTDM C/M(B)CARDINAL MARKS (BLACK)

Dimensions: 2.46 Mtrs LOA.. Diameter 1 Mtr.100 mm. Aluminium central reinforcing tube with

Industry standard pattern flanges both ends.Flanges 250 mm. Diameter,

(accepts all common Navigation Beacons)(Shown with 350 mm. Sealite Beacon mount,and 450 mm. Tideland/Tideland extension.




PPLLAASSNNAAVVROTOR MOULDED PILE CAPS

Manufactured from quality polyethylene for long service life.UV resistant long life high visibility colours.

Other colours available on request.3M Reflective pile banding available on request.

MODEL COLOURSPORT HAND PILE CAP LT-PC (R) 450 mm. inside diameter) REDSTARBOARD HAND PILE CAP LT- PC (G) 450 mm. inside diameter) GREENSPECIAL MARK PILE CAP LT-PC (Y) 450 mm. inside diameter) YELLOWPILE CAP LT-PC (W) 450 mm. inside diameter) WHITEPILE CAP LT- FTPC (colour) 560 mm. inside diameter.Flat top pile cap (checker plate pattern)

ALL COLOURS

3M Diamond grade reflective pile banding As required

–





Isolated Danger BuoyDIMENSIONS: 1 Metre Diameter x 5 Metres O.A. length.

Beacon 2.2 Metres above water line.C/W Top Marks & counterweight

Available with Sealite SL70 Navigation Beacons & mounting plate to suit.

Model shown: - CODE: LT- ID (R&B)

This equipment complies with requirements of the U.S. Coast Guard in 33 CFR part 66

The Sealite Advantage

• User-adjustable flash characters

• User-replaceable battery in sealed battery compartment

• NiMH battery for long service life & wide temperature range

• Completely sealed & self-contained using ultrasonic welding techniques

• Installs in minutes & operates maintenance-free for up to five years

• IP68 waterproof

SL15 1nm Solar Marine Light

SL15 solar light on FAD, Australia SL15 marina lights, Vigo, Spain

Now available with user-adjustable

flash settings

New Feature

Internal user-replaceable battery in sealed compartment (IP68 rating)

LED lens and Sealite’s 360° Omnidirectional LED Reflector (US Pat. No. 6,667,582.

AU Pat. No. 778,918)

4 ultra-high intensity LEDs

Bird deterrent spike

Internal solar module

Automatic night activation

Lens and base moulded from UV-stabilised LEXAN® polycarbonate

Internal user-adjustable flash settings

SL15 1nm Solar Marine Light

The Sealite SL15 1nm compact LED light is exceptional value and incorporates some of the most advanced technology available. In the tradition of Sealite lanterns, the SL15 is designed to be maintenance-free and have a service life of over 5 years.

The SL15 can be installed in minutes, and requires no operator intervention. The flash characters are user-adjustable, and the unit is supplied ready for immediate installation.

During daylight hours the solar module will charge the battery, and the lantern will automatically begin operation at dusk – once the ambient light threshold drops sufficiently.

The SL15 features the Sealite LED 360° Omnidirectional Reflector, which increases the intensity and uniformity of the horizontal output. The tough polycarbonate lens is specifically designed for use with LEDs, and incorporates an environment-friendly spike – deterring unwelcome bird life.

The unit is sealed using an advanced ultrasonic weld, enabling a rugged and completely waterproof seal capable of prolonged and deep immersion (IP68).

Optional ON/OFF Switch (SL15-SW)

The SL15 is also available with an optional ON/OFF switch for temporary installations such as worksites.

Ma

rine Buo

ysSL15

1nm Solar Marine Light

SL15 with optional ON/OFF switch (SL15-SW)

User replaceable battery

FLASH SETTING CODE

Flash Sequence(on, off, on…)

0STEADY LIGHT

(intensity reduced)

1 0.5, 1.0

2 0.5, 3.5

3 1.0, 3.0

4 0.5, 5.5

5 0.3, 0.7

6 0.3, 0.7, 0.3, 0.7, 0.3, 0.7, 0.3, 15.7

7 0.3, 1.7

8 0.3, 2. 2

9 0.5, 2.0

A 0.3, 2.7

B 0.5, 2.5

C 0.7, 2.3

D 0.5, 4.5

E Custom Setting

USER-ADJUSTABLE FLASH PATTERNS

Other flash patterns are available on request

• Specifications subject to change or variation without notice

* Subject to standard terms and conditions

Light Characteristics Light Source 4 ultra-high intensity LEDs Available Colours Red, Green, White, Yellow, Blue Peak Intensity (cd) Red - 2.2 Green - 2.4 White - 4.1 Yellow - 1.0Visible Range (nm) >1Horizontal Output (degrees) 360Vertical Divergence (degrees) 9Reflector Type Omnidirectional 360° LED Reflector (US Pat. No. 6,667,582.

AU Pat. No. 778,918)Available Flash Characteristics 16 user-adjustable IALA flash characteristics (other flash patterns

available on request)Intensity Adjustments 100% as standard (custom intensity available on request) LED Life Expectancy (hours) >100,000

Electrical Characteristics Current Draw (mA) MinimalCircuit Protection Integrated Nominal Voltage (v) 3.6Autonomy (days) >20 (14 hour darkness, 12.5% duty cycle)Temperature Range -40 to 80oC

Solar Characteristics Solar Module Type Multicrystalline Output (watts) 0.45Solar Module Efficiency (%) 14Charging Regulation Microprocessor controlled

Power Supply Battery Type High grade NiMH - Environment friendlyBattery Capacity (Ah) 1.6Nominal Voltage (v) 3.6Battery Service Life Average 5 years

Physical CharacteristicsBody Material LEXAN® Polycarbonate – UV-stabilised Lens Material LEXAN® Polycarbonate – UV-stabilisedLens Diameter (mm/inches) 107 / 41/4

Lens Design External optics with interior flute design Mounting 4 x 6mm mounting holes Height (mm/inches) 141 / 51/2 Width (mm/inches) 136 / 53/8

Mass (kg/lbs) 0.6 / 1/3Product Life Expectancy Up to 12 years

Certifications CE EN61000-6-3:1997. EN61000-6-1:1997Quality Assurance ISO9001:2000Waterproof IP68

Intellectual Property Patents US Pat. No. 6,667,582. AU Pat. No. 778,918Trademarks SEALITE® is a registered trademark of Sealite Pty Ltd

Warranty * Full 3 years

Options Available • ON/OFF switch (SL15-SW) • Custom flash patterns• 50mm pole mount adaptor plate

S PECI F ICAT ION S •

SL151nm Solar Marine Light

SL15

SP

LLightAvaila

PeakVisibleHorizoVerticReflec

Availa

IntensLED L

ElecCurreCircui

NominAutonTemp

SolaSolar

OutpuSolarCharg

BatteBatteNominBatter

PBodyLens M

LensLens DMounHeighWidthMassProdu

CCE

QualitWater

IntelPaten

Trade

War

Opti

Spe

* Sub


with optional ON/OFF switch(SL15-SW)

ECIFICATIONS •

Source FLASHPATTERNS4 ultra-high intensity LEDs

E Custom Setting

ble Colours Red, Green, White, Yellow, Blue

Intensity (cd) Red - 2.2 Green - 2.4 White - 4.1 Yellow - 1.0

Range (nm) >1

ntal Output (degrees) 360

al Divergence (degrees) 9

tor Type Omnidirectional 360° LED Reflector (US Pat. No. 6,667,582.AU Pat. No. 778,918)

ble Flash Characteristics 16 user-adjustable IALA flash characteristics (other flash patternsavailable on request)

ity Adjustments 100% as standard (custom intensity available on request)ife Expectancy (hours) >100,000

trical Characteristicsnt Draw (mA) Minimalt Protection Integratedal Voltage (v) 3.6

omy (days) >20 (14 hour darkness, 12.5% duty cycle)erature Range -40 to 80oC

r CharacteristicsModule Type Multicrystallinet (watts) 0.45

Module Efficiency (%) 14

ing Regulation Microprocessor controlled

ry Type High grade NiMH - Environment friendlyry Capacity (Ah) 1.6

al Voltage (v) 3.6

y Service Life Average 5 years

Material LEXAN® Polycarbonate – UV-stabilisedaterial LEXAN® Polycarbonate – UV-stabilised

Diameter (mm/inches) 107 / 41/4

esign External optics with interior flute design available on requestting 4 x 6mm mounting holest (mm/inches) 141 / 51

/2

(mm/inches) 136 / 53/8

(kg/lbs) 0.6 / 1/3

ct Life Expectancy Up to 12 years

EN61000-6-3:1997. EN61000-6-1:1997

y Assurance ISO9001:2000

proof IP68

lectual Propertyts US Pat. No. 6,667,582. AU Pat. No. 778,918marks SEALITE® is a registered trademark of Sealite Pty Ltd

ranty * Full 3 years

ons Available ON/OFF switch (SL15-SW) Custom flash patterns 50mm pole mount adaptor plate

cifications subject to change or variation without notice

ject to standard terms and conditions

ight Characteristics
USER-ADJUSTABLE
FLASH

SETTING

CODE

Flash Sequence(on, off, on...)

STEADY LIGHT

0 (intensityreduced)

1 0.5, 1.0

2 0.5, 3.5

3 1.0, 3.0

4 0.5, 5.5

5 0.3, 0.7

60.3, 0.7, 0.3, 0.7,0.3, 0.7, 0.3, 15.7

7 0.3, 1.7

8 0.3, 2. 2

9 0.5, 2.0

A 0.3, 2.7

B 0.5, 2.5

C 0.7, 2.3

D 0.5, 4.5

Power Supply

hysical Characteristics

Other flash patterns are

ertifications


To

Th256usenee

his equipment complies with requirements
f the U.S. Coast Guard in 33 CFR part 66

Large internalsolar module

LED lens and Sealite’s360° Omnidirectional LEDReflector(US Pat. No. 6,667,582.AU Pat. No. 778,918)

6 ultra-highintensity LEDs

A

Shown with optional 200mm

OD base pattern (SL60-LB)

Lens and basemoulded fromUV-stabilisedLEXAN®polycarbonate

Tl

Me

TcO

Das

Tss

Tmajor automobile manufacturing companies.

e Sealite AdvantageIALA flash patterns,r-adjustable without thed for external devices

User-replaceablebattery in sealed batterycompartment

NiMH battery for longservice life & widetemperature range

4 user-adjustable intensitysettings

ON/OFF storage switch

IP68 waterproof

buoy, Manila, Philippines

SL60’s marking gas transfer lines, GuajiraPeninsula, Colombia

utomatic night activation

Internal user-replaceablebattery in sealed
compartment (IP68 rating)
he Sealite SL60 is the world’s most popular and versatile 2nm solar marineight.

ade from tough, durable polycarbonate and using the latest high intensity LED’s, noxpense has been spared in the design and development of this lantern.

he SL60 can be installed in minutes, and requires no operator intervention. The flash-haracters are easily adjusted on-site by the user, and the lantern has a permanent ON/FF switch for easy storage.

uring daylight hours the solar module will charge the battery, and the lantern willutomatically begin operation at dusk – once the ambient light threshold dropsufficiently.

he SL15, SL60 and SL70 lanterns are the only compact marine lanterns available with aealed battery compartment, allowing the battery to be replaced after years ofervice – don’t throw the light away at the end of the battery service life.

he unit is sealed using polycarbonate bonding compounds similar to those used by

SL60 mounted on Sealite Aquafloat

S2nm Solar Marin

Standard Bas


Optional 200mm OD Base

SPECIFICATIONS •

Light Source 6 ultra-high intensity LEDsAvailable Colours Red, Green, White, Yellow, Blue

Peak Intensity (cd) Red - 10.0 Green - 10.1 White - 12.1 Yellow - 8.9

Visible Range (nm) >2

Horizontal Output (degrees) 360

Vertical Divergence (degrees) 9

Reflector Type Omnidirectional 360° LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918)Available Flash Characteristics Up to 256 IALA recommended (user adjustable)Intensity Adjustments Adjustable in 25% incrementsLED Life Expectancy (hours) >100,000

Electrical CharacteristicsCurrent Draw (mA) MinimalCircuit Protection IntegratedNominal Voltage (v) 3.6

Autonomy (days) >20 (14 hour darkness, 12.5% duty cycle)Temperature Range -40 to 80oC

Solar CharacteristicsSolar Module Type MulticrystallineOutput (watts) 1.4

Solar Module Efficiency (%) 14

Charging Regulation Microprocessor controlled

Battery Type High grade NiMH - Environment friendlyBattery Capacity (Ah) 4

Nominal Voltage (v) 3.6

Battery Service Life Average 5 years

Physical CharacteristicsBody Material LEXAN® Polycarbonate – UV-stabilisedLens Material LEXAN® Polycarbonate – UV-stabilisedLens Diameter (mm/inches) 150 / 57

/8

Lens Design External optics with interior flute designMounting 4 x 4.5mm mounting holesHeight (mm/inches) 205 / 81

/8

Width (mm/inches) 177 / 7

Mass (kg/lbs) 1.1 / 23/8

Product Life Expectancy Up to 12 years

CE EN61000-6-3:1997. EN61000-6-1:1997

Quality Assurance ISO9001:2000

Waterproof IP68

Intellectual PropertyPatents US Pat. No. 6,667,582. AU Pat. No. 778,918Trademarks SEALITE® is a registered trademark of Sealite Pty Ltd


Options Available 8Ah battery (SL60/8Ah) 200mm OD base (SL60-LB) Hard-wire synchronisation 50mm pole mount adaptor plate

Specifications subject to change or variation without notice


L60
e Light
e

Light Characteristics

Power Supply

Certifications


To

o

Th

NewDual internalhigh-performance

Aa

Now available withptional Comm-Synch or

Radio Control

6i

LmULp

LsOe

Tate

MSwse

e Sealite Advantage

Reliable year-roundoperation in low sunlightconditions

Tfp

256 IALAflash patterns,user-adjustable withoutthe need for externaldevices

Ts

SDt


NiMH battery for longservice life & widetemperature range



IP68 waterproof

O

TTi

O

Is

utomatic night
solar modulesctivation
ultra-high
ntensity LEDs
LED lens and Sealite’s360° OmnidirectionalLED Reflector(US Pat. No. 6,667,582.AU Pat. No. 778,918)

ens and baseoulded fromV-stabilisedEXAN®
olycarbonate
arge industry ___tandard 200mmD base pattern forase of installation

Internal user-replaceable

___________ battery in sealedcompartment(IP68 rating)

he SL70 is exceptional in it’s unique ability to be able to ‘track the sun’nd operate reliably in low sunlight conditions. The SL70 has been proveno operate as a 2-mile compact buoy lantern in various low-sunlightnvironments such as Britain, Canada, and Europe.

ade from tough, durable polycarbonate and using the latest high intensity LED’s, theL70 lantern boasts dual high-performance solar modules incorporated into Sealite’sorld-first Solar Collection Lens. These solar modules are angled to obtain maximumunlight capture, allowing the unit to operate reliably in a range of low sunlightnvironments.

he SL70 can be installed in minutes, and requires no operator intervention. Thelash-characters are easily adjusted on-site by the user, and the lantern has aermanent ON/OFF switch for easy storage.

he sealed battery compartment allows the battery to be replaced after years ofervice – don’t throw the light away at the end of the battery service life.

ealite’s SL70 solar marine light has been awarded the prestigious AustralianesignMark® at the Australian Design Awards; a testament of Sealite’s commitment to

he ongoing development of state-of-the-art products.

ptional RF Communication Synchronisation (SL70-CS)

he SL70 is now available with optional short-range RF communication synchronisation.wo (2) or more lights can be synchronised to flash in unison via an internal RF module -

deal for rivers, marina entrances, channel marking and aquaculture.

ptional 12 LED Light Configuration (SL70-12)

n high sunlight regions the SL70 may be fitted with 12 LED’s and appropriate intensityettings to provide a range of >3 nautical miles (colour dependant).

RF Comm-SynchSL70 Lanterns

R
InternalF Module

SLC310C

To

Th

ompact 3nm Solar Marine Lantern


IALA colours

Available with

internal GPS

synchronisation

___ s

200mm OD basepattern for ease ofinstallation

The SLC310 is a robust completely self-contained 3nm Solar LEDdesigned to fit directly onto existing 200mm OD industry sta

The unit is made from cast aluminium, subject to 7-stage powdervisibility IALA colours for daytime recognition. Four (4) premium-gradeintegrated into the assembly, and mounted to collect sunlight at all

The SLC310 is IP68 waterproof - designed specifically to endure a wide rmarine environmental conditions including continual immersion.

The solar array charges an internal 12Ah battery during daylight hourslight will automatically begin operation.

The unit is capable of producing any of 256 IALA recommended flfield-adjustable without the need for ancillary equipment.

The tough polycarbonate lens is specifically designed for use with LEDs,incorporates an environment-friendly spike - deterring unwelcome bi

e Sealite Advantage

200mm OD base patternfor immediate installationon existing structures

User-replaceable battery

256 IALA flash patterns,user-adjustable withoutthe need for externaldevices

O

Scand exclusion zones with independent lanterns which flash in synchro

Tempered glass solarmodules for peakefficiency


IP68 waterproof

Wnavaids and confusing background lighting.

LED lens and Sealite’s360° OmnidirectionalLED Reflector(US Pat. No. 6,667,582.
AU Pat. No. 778,918)
High visibility ________

4 x 2wattmulticrystallineolar modules,ensuring maximumlight collection tocharge the battery

I(

s

a

,

a

ar

nternal 12Ah battery
IP68 rating)
Marine Lanternndard mounts.

-coating in higholar modules areangles.

nge of harsh

and at dusk the

sh characters -

ndd life.

ptional GPS Synchronisation (SLC310-GPS)

ealite’s SLC310 is also available with optional GPS synchronisation enabling users tolearly mark channels, ports, rivers and entrances, marinas, aquaculture installations

nisation.

hen lanterns flash in synchronisation, they can be clearly distinguished from other

SCompact 3nm Solar Mar

Convenient user-replaceablebattery

SPECIFICATIONS •

Light CharacteristicsLight Source 20 ultra-high intensity LEDsAvailable Colours Red, Green, White, Yellow, Blue

Peak Intensity (cd) Red - 30.1 Green - 33.4 White - 60.5 Yellow - 26




Reflector Type Omnidirectional 360° LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918)Available Flash Characteristics Up to 256 IALA recommended (user adjustable)Intensity Adjustments Adjustable in 25% incrementsLED Life Expectancy (hours) 100,000

ECircuit Protection IntegratedNominal Voltage (v) 12

Autonomy (days) 20 (14 hour darkness, 12.5% duty cycle)Temperature Range -40 to 80oC

Solar CharacteristicsSolar Module Type MulticrystallineOutput (watts) 8 (4 x 2watt)Solar Module Efficiency (%) 14


Power SupplyBattery Type SLA (Sealed Lead Acid)Battery Capacity (Ah) 12

Nominal Voltage (v) 12


Body Material 7-stage powder-coated aluminiumLens Material LEXAN® Polycarbonate – UV-stabilised

Lens Diameter (mm/inches) 107 / 41/4

Lens Design External optics with interior flute designMounting 200mm OD base pattern

Height (mm/inches) 374 / 143/4

Width (mm/inches) 245 / 92/3

Mass (kg/lbs) 6.4 / 141/8


CCE EN61000-6-3:1997. EN61000-6-1:1997


Waterproof IP68



Options Available GPS synchronisation (SLC310-GPS)



LC310
ine Lantern
lectrical Characteristics

Physical Characteristics

ertifications

SLC420C

To

o

Th200immexi


New36 ultra-highintensity LEDs


AU Pat. No. 778,918)

Now available withptional Comm-Synch or

Radio Control

Hc

2pi

e Sealite Advantagemm OD base pattern forediate installation on

sting structures

User-replaceable battery


TLm

Tvi

Ta

Tf

Ti



Vertical light emissions tomaintain visibility whenpassing adjacent to light

O

Tme

Wn

O

Tt

igh visibility IALA
olours
4 x 5watt multicrystallinesolar modules, ensuringmaximum light collectionto charge the battery

00mm OD baseattern for ease of

nstallation

Internal 20Ah battery

he SLC420 is a robust completely self-contained 4nm Solar LED Marineantern designed to fit directly onto existing 200mm OD industry standardounts and incorporates a 36 LED light source for even greater light intensity.

he unit is made from cast aluminium, subject to 7-stage powder-coating in highisibility IALA colours for daytime recognition. Four (4) premium-grade solar modules arentegrated into the assembly, and mounted to collect sunlight at all angles.

he solar array charges the 20Ah battery during daylight hours, and at dusk the light willutomatically begin operation.

he unit is capable of producing any of 256 IALA recommended flash characters -ield-adjustable without the need for ancillary equipment.

he tough polycarbonate lens is specifically designed for use with LEDs, andncorporates an environment-friendly spike - deterring unwelcome bird life.


he SLC420 is also available with optional GPS synchronisation enabling users to clearlyark channels, ports, rivers and entrances, marinas, aquaculture installations andxclusion zones with independent lanterns which flash in synchronisation.

hen lanterns flash in synchronisation, they can be clearly distinguished from otheravaids and confusing background lighting.

ptional GSM Remote Monitoring (SLC420-GSM)

he SLC420 may also be fitted with GSM remote monitoring capabilities- enabling userso access real-time diagnostic data remotely via Cell-phone or PC integration.

SLC420’s mounted on SLB1250 Navigation Buoys,

Pasig River, Manila, Philippines

RF Comm-Synch SLC420 Lanterns

R
Internal F Module


Cbattery

SPECIFICATIONS •

Light Source 36 ultra-high intensity LEDsAvailable Colours Red, Green, White, Yellow, Blue

Peak Intensity (cd) >60





ECircuit Protection IntegratedNominal Voltage (v) 12




Battery Type SLA (Sealed Lead Acid)Battery Capacity (Ah) 20





Lens Design External optics with interior flute designMounting 200mm OD base patternHeight (mm/inches) 530 / 207

/8


Mass (kg/lbs) 8.5 / 183/4


CCE EN61000-6-3:1997. EN61000-6-1:1997




Options Available GPS (SLC420-GPS) or RF communication (SLC420-CS) synchronisation Remote monitoring (via GSM cell-phone- SLC420-GSM) or control (via radio- SLC42 Note - remote monitoring/control will reduce visible range of lantern due to increased

consumption



LC420
ine Lantern
0-RC) capabilitiespower

onvenient user-replaceable

Light Characteristics

lectrical Characteristics

Power Supply


ertifications

SLC400C

To

ThCoimm


S(L

L3

Available with internal GPSsynchronisation or

GSM Cell-phone Monitoring

Td

Ta

Ti

Ti

Ti

e Sealite Advantagemplete unit - ready for

ediate installation

Impact & weather resistantpolyethylene


O

Tme

Wn




O

Tt

L125-1 light-head36 ultra-high intensity
EDs. IP68 rating)
L(

A

IALA colours4mselc

polyethylene body

nspection or replacement whilst the base remains fixed to the suppo


he SLC400 is also available with optional GPS synchronisation enablingark channels, ports, rivers and entrances, marinas, aquaculture insxclusion zones with independent lanterns which flash in synchronisa

hen lanterns flash in synchronisation, they can be clearly distinguishedavaids and confusing background lighting.

ptional GSM Remote Monitoring (SLC400-GSM)

he SLC400 may also be fitted with GSM remote monitoring capabilitio access real-time diagnostic data remotely via Cell-phone or PC in

SLC400 installed in Denmark

ED lens and Sealite’s60° OmnidirectionalED Reflector

US Pat. No. 6,667,582.

U Pat. No. 778,918)

High visibility
x 5wattulticrystalline
olar modules,nsuring maximumight collection to
harge the battery
Rotationally mouldedUV-stabilised virgin

r

t


he SLC400 is a completely self-contained 4nm Solar LED Marine Lanternesigned for a range of low-maintenance applications.

he light boasts a large internal waterproof battery compartment, a 36 LED flasher unit,nd 4 premium-grade 5watt solar modules mounted to collect sunlight at all angles.

he SLC400 is moulded from UV-stabilised virgin polyethylene, providing enormousmpact and weather resistance, in addition to high visibility IALA colours.

he tough polycarbonate lens is specifically designed for use with LEDs, andncorporates an environment-friendly spike - deterring unwelcome bird life.

he user-friendly 2-piece design allows the lantern to be opened for convenient battery
ting structure.
users to clearlytallations andion.

from other

es- enabling userstegration.


Convenient battery replacement

SPECIFICATIONS•

Light CharacteristicsLight Source SL125-1 (36 LED lantern as standard)Available Colours Red, Green, White, Yellow, Blue






Circuit Protection IntegratedNominal Voltage (v) 12







Body Material Rotationally moulded UV-stabilised virgin polyethyleneLens Material LEXAN® Polycarbonate – UV-stabilisedLens Diameter (mm/inches) 150 / 57

/8

Lens Design External optics with interior flute designMounting 4 x 11mm mounting holes



Mass (kg/lbs) 17 / 37 3/8


CE EN61000-6-3:1997. EN61000-6-1:1997


Waterproof IP68 light-head



Options Available 200mm OD mounting plate Hard-wire or GPS synchronisation Remote monitoring (via GSM cell-phone- SLC400-GSM) Note - remote monitoring will reduce visible range of lantern due to increased power c



LC400
ine Lantern
onsumption

Electrical Characteristics

Power Supply


Certifications

SLC500C

To

ThCoim


LED lens and Sealite’s360° Omnidirectional

IALA


GSM Cell-phone MonitoringRotaUV-svirgibod

Thefor a

Theheadangle

Theimpa

The tincor

Theinspe

e Sealite Advantagemplete unit - ready formediate installation



O

Tmexclu



Vertical light emissions tomaintain visibility whenpassing adjacent to light W

nava

Opti

Theto ac

SL125-2 light-head(72 ultra-high intensity
LEDs. IP68 rating) LED Reflector
(US Pat. No. 6,667,582.AU Pat. No. 778,918)

High visibility
colours
tionally mouldedtabilisedn polyethyleney _________

SLC500 is a completely self-contained 5nm Solar Marinerange of low-maintenance applications.

light boasts a large internal battery compartment, a multiple tiered, and 4 premium-grade 10watt solar modules mounted to collects.

SLC500 is moulded from UV-stabilised virgin polyethylene, providingct and weather resistance, in addition to high visibility IALA colo

ough polycarbonate lens is specifically designed for use with LEDs, aporates an environment-friendly spike - deterring unwelcome bir

user-friendly 2-piece design allows the lantern to be opened for coction or replacement whilst the base remains fixed to the suppo

sion zones with independent lanterns which flash in synchronisa

ids and confusing background lighting.

onal GSM Remote Monitoring (SLC500-GSM)

SLC500 may also be fitted with GSM remote monitoring capabiliticess real-time diagnostic data remotely via Cell-phone or PC in

4 x 10wattmulticrystalline solarmodules, ensuringmaximum lightcollection to charge
the battery

Lantern designed

SL125 LED light-sunlight at all

enormousurs.

ndd life.

nvenient batteryrting structure.


he SLC500 is also available with optional GPS synchronisation enabling users to clearlyark channels, ports, rivers and entrances, marinas, aquaculture installations and

tion.

hen lanterns flash in synchronisation, they can be clearly distinguished from other

es- enabling userstegration.



SPECIFICATIONS •














Body Material Rotationally moulded UV-stabilised virgin polyethyleneLens Material LEXAN® Polycarbonate – UV-stabilisedLens Diameter (mm/inches) 150 / 57

/8

Lens Design External optics with interior flute designMounting 4 x 11mm mounting holes



Mass (kg/lbs) 19 / 413/4


CE EN61000-6-3:1997. EN61000-6-1:1997





Options Available 200mm OD mounting plate Hard-wire or GPS synchronisation Remote monitoring (via GSM cell-phone- SLC500-GSM) Note - remote monitoring will reduce visible range of lantern due to increased power c



LC500
ine Lantern
onsumption


Power Supply


Certifications

SLC600Compact 6nm Solar Marine Lantern

To

Th

SL125-4 light-head(144 ultra-highintensity LEDs. IP68rating)

Rotationally mouldedUV-stabilised virginpolyethylene body



IALA colours

e Sealite Advantage

Complete unit - ready forimmediate installation



TM

Tha

Ti

Tinspection or replacement whilst the base remains fixed to the suppo




Optional GPS Synchronisation (SLC600-GPS)

The SLC600 is also available with optional GPS synchronisation enablingmark channels, ports, rivers and entrances, marinas, aquaculture insexclusion zones with independent lanterns which flash in synchronisa

When lanterns flash in synchronisation, they can be clearly distinguishednavaids and confusing background lighting.

Optional GSM Remote Monitoring (SLC600-GSM) and AIS IntegrThe SLC600 may also be fitted with GSM or AIS remote monitoring susers to access real-time diagnostic data remotely. AIS integration alsMessage 21 information to be broadcast to mariners within the region

S

Port of Lagos, Nigeria

TSwev

IpmeiiASystems (AIS).

AU Pat. No. 778,918)
4 x 20wattmulticrystalline solarmodules, ensuringmaximum lightcollection to chargethe battery

High visibility
he SLC600, the world’s largest self-contained LED lantern, is a 6nm Solar LEDarine Lantern designed for a range of low-maintenance applications.

he light boasts a large internal battery compartment, a multiple tiered SL125 LED light-ead, and 4 premium-grade 20watt solar modules mounted to collect sunlight at allngles.

he SLC600 is moulded from UV-stabilised virgin polyethylene, providing enormousmpact and weather resistance, in addition to high visibility IALA colours.

he user-friendly 2-piece design allows the lantern to be opened for convenient battery
rting structure.
users to clearlytallations andtion.

from other

ation (SLC600-AIS)ystems - enablingo enables crucial.

LC600 AIS enabled lantern,

he light-head of theLC600 may be fittedith up to 4 tiers of LEDs,nabling up to 7nmisible range.

n addition, the largeower system allowsultiple ancillary

quipment to bencluded in the assemblyncluding monitoring andutomatic Identification



SPECIFICATIONS •














Body Material Rotationally moulded UV-stabilised virgin polyethyleneLens Material LEXAN® Polycarbonate – UV-stabilised


Lens Design External optics with interior flute designMounting 4 x 11mm mounting holesHeight (mm/inches) 980 / 385

/8


Mass (kg/lbs) 31 / 681/4


CE EN61000-6-3:1997. EN61000-6-1:1997





Options Available 200mm OD mounting plate Hard-wire or GPS synchronisation Remote monitoring (via GSM cell-phone- SLC600-GSM or AIS) Note - remote monitoring will reduce visible range of lantern due to increased power c



LC600
ine Lantern
onsumption


Power Supply


Certifications

S3

To

Th

L50 / SL52-4nm Self-Contained Marine Lanterns


___________ Bird deterrent spike

__________ 20 ultra-highintensity LEDs

User-replaceable4.5Ah battery in7-stagepowder-coatedaluminium housing

A

s

Adjustable 5watt
vailable with
internal GPS

ynchronisationS5

e Sealite AdvantageSn

Ba

Tadb

TpTf

Impact resistant batteryhousing

>10 day autonomy

Interchangeable 20 LEDflasher unit & replaceablelens assembly


Automatic night activationSio

Ts

Tru

Olaas

F

Lens assembly

InterchangeableDigital Flasher unit

L50- with single
watt solar module solar modules(s)
angled to maximisesolar collection

ealite’s 3-4 navigation, co

oasting large,nd large exter

he models arend duty cyclesual solar moduuoy swings.

he lens assemolycarbonatehe ring is thenasteners, prov

ealite’s SL50s fitted with dperate reliab

he SL50 and SLector, includin

he lanterns areeplaceable, annit.

nce installed,antern. Duringdvanced switchutomatically bufficiently.

lash synchroni

SL52- with dual
5watt solar modules
autical mile lanterns represent a traditional approacmbined with advantages of LED technology.

accessible battery compartments, inter-changeable 20 Lnal solar modules, the lanterns are ideal for heavy-dut

available in a variety of solar/battery configurations fo, and are fitted with either a single solar module for fixeles for buoy mounting, allowing the unit to collect sola

bly can be easily removed for access to the LED flasher ulens is bonded using an ultra-sonic weld to a mouldedfastened to the aluminium attachment plate using 316-gradiding a lifetime bond without the use of bonding compo

is fitted with a single 5watt solar module, while thual 5watt panels, and 4.5Ah SLA battery, allowingly with higher duty cycles or in lower sunlight re

52 lanterns have been widely adopted by professionals ing ports and harbours, transport departments and coast

covered by the Sealite full 3 year warranty, and all comd can be purchased individually in the unlikely event of

no operator intervention is required to operate the self-daylight hours the solar modules will charge the battery th-mode regulator incorporated into the flasher unit. The lanegin operation at dusk – once the ambient light thresho

sation is available via hard-wire.

Pasig River Rehabilitation Project, Manila, Philippines

Available withoptional 200mm OD
mounting plate
h to marine

ED flasher units,y conditions.

r various latitudesd installations, orr radiation as the

nit. Thecircular ring.e stainlessunds.

e SL52 modelthe unit to

gions.

the marineguards.

ponents aredamage to the

containedrough antern willld drops

SL50 / SL523-4nm Self-Contained Marine Lanterns

SL50 SL52

SPECIFICATIONS •


Peak Intensity (cd) Red - 47 Green - 47 White - 90 Yellow - 32





Electrical CharacteristicsCurrent Draw (mA) 180 (nominal)Circuit Protection IntegratedNominal Voltage (v) 12


Solar CharacteristicsSolar Module Type MulticrystallineOutput (watts) SL50: 5 (1 x 5watt) SL52: 10 (2 x 5watt)Solar Module Efficiency (%) 14


Battery Type SLA (Sealed Lead Acid)Battery Capacity (Ah) 4.5





Lens Design External optics with interior flute designMounting 50mm OD poleHeight (mm/inches) 466 / 181

/3

Width (mm/inches) SL50: 385 / 151/4 SL52: 642 / 251

/3

Mass (kg/lbs) SL50: 4 / 83/4 SL52: 4.5 / 97

/8


CCE EN61000-6-3:1997. EN61000-6-1:1997




Options Available 200mm OD mounting plate Hard-wire synchronisation



Power Supply


ertifications

SL23 / SL24 and SL23.5 / SL24.53-4nm Self-Contained Marine Lanterns

This equipment complies with requirementsof the U.S. Coast Guard in 33 CFR part 66


20 ultra-high intensityLEDs


Available with

internal GPS

synchronisation

User-replaceable 7.5Ahbattery in 7-stagepowder-coatedaluminium housing

Adjustable 10or 5watt solarmodule(s)angled tomaximise solarcollection SL24.5- with dual

5watt solar modules

Available withoptional 200mm ODmounting plate _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ SL23- with single

10watt solar module

The Sealite Advantage Sealite’s 3-4 nautical mile lanterns incorporate the latest advancements in LEDtechnology.

The internal 20 LED flasher unit is interchangeable between lanterns, allowing theoperator to replace the flasher unit with another colour at any stage of the product’slife. The 20 LED flasher unit is also equipped with 2 rotary switches, allowing the user tochange the flash characteristics of the light at any stage.

An easy DIP switch arrangement means the light can be set to any of 4 intensity settings- for differing duty cycles and applications.


>20 day autonomy




The SL23 and SL24 model lanterns are the workhorse of the self-containedlantern range, and are specifically designed to operate reliably in a range oflow sunlight regions, or as steady-on lights.

The large 7.5Ah battery provides 20 day autonomy, and the 12watt solar module(s)provide sufficient charge in all seasons.

The lanterns are used extensively by marine departments throughout Canada, Britain,Europe and the United States.

Flash synchronisation is available via hard-wire.

Lens assemblySealite SL23 marine lights mark the famous Sunshine Skyway Bridge, Tampa, Florida


SL23 / SL24 and SL23.5 / SL24.53-4nm Self-Contained Marine Lanterns

SL23 SL24

SPECIFICATIONS• SL23.5 SL24.5

Light CharacteristicsLight Source 20 ultra-high intensity LEDsAvailable Colours Red, Green, White, Yellow, BluePeak Intensity (cd) Red - 47 Green - 47 White - 90 Yellow - 32







Solar CharacteristicsSolar Module Type MulticrystallineOutput (watts) SL23: 1

2 (1 x 10wat t ) SL23.5: 5 (1 x 5watt)SL24: 2Solar Module Efficiency (%) 14


Power SupplyBattery Type SLA (Sealed Lead Acid)Battery Capacity (Ah) 7.5



Physical CharacteristicsBody Material 7-stage powder-coated aluminiumLens Material LEXAN® Polycarbonate – UV-stabilisedLens Diameter (mm/inches) 107 / 41

/4

Lens Design External optics with interior flute designMounting 50mm OD poleHeight (mm/inches) SL23: 3

87 / 15 1/ 4 SL23.5: 334/ 131

/8

SL24: 3Width (mm/inches) SL23: 278 / 10 7

/ 8 SL23.5: 254 / 10SL24: 4Mass (kg/lbs) SL23: 7/ 15 3

/ 8 SL23.5: 6.5 / 141/3

SL24: 7Product Life Expectancy Up to 12 years

CertificationsCE EN61000-6-3:1997. EN61000-6-1:1997




Options Available 200mm OD mounting plate Hard-wire synchronisation

Specifications subject to change or variation without notice * Subject to standard terms and

Phone: (03) 9772 9Em

W

M

LLAATTEERRAALLT E C H N O L O G Y

arine Navigation Aids

The LTM LateralTechnology Sealite/Tideland adapter is available formounting Sealite SL50 & SL52 to existing or new structures or Buoys.

Manufactured from marine, alloy TIG welded and seven stage powdercoated.

019 Fax: (03) 9773 8641 Mobile: 0428 278 707ail: [email protected]: www.lateraltechnology.com.au


SL125/C5-7nm Complete Marine Lantern Assembly



NewLED lens and Sealite’s360° OmnidirectionalLED Reflector(US Pat. No. 6,667,582.AU Pat. No. 778,918)

Now available withoptional Comm-Synch or

Radio Control

Lens moulded fromUV-stabilised LEXAN®polycarbonate(IP68 rating)

Adjustablesolar module(s)angled tomaximise solarcollection User-replaceable

26Ah battery in 7-stagepowder-coated aluminiumhousing (IP66)Large industry standard

200mm OD base pattern

The SL125/C Complete Lantern Assembly provides a complete solution forvisual navigation requirements.

The SL125/C offers unique flexibility, and is available in varying configurations to suit arange of installation and intensity requirements.

The powder-coated 3mm aluminium housing is laser-cut, and robotically folded forguaranteed precision every time.

One or two 20watt solar module(s) are fitted as standard, and the unit can be readilyequipped with up to two individual 40watt modules to power longer-range requirementsor ancillary equipment.

A modular design, all components of the system are replaceable in the unlikely eventof damage to the unit. The battery is accessed through the top of the lantern assembly,via a robust swing-hinge. Access to the user-adjustable flash and intensity settings is alsoachieved through this design.

The solar modules are extendable to 51 degrees as standard, with the option to increasein equatorial regions.


Complete lanternassembly

SL125 light-head availablewith up to 4 tiers of ultra-high intensityLEDs (36 LEDsper tier) for increased lightintensity

256 user-adjustable flashcharacteristics

SL125-1/C-1 SL125 1-Tier. Complete Lantern Assembly. Single 20w Solar Module.

SL125-1/C-2 SL125 1-Tier. Complete Lantern Assembly. Dual 20w Solar Modules.







ORDERCODES

Eg. SL125-1/C-1-GPS.R

Denotes SL125 1-TierComplete Lantern Assembly.Single Solar Module. GPSSynchronised. RED.

4 adjustable intensitysettings



IP68 light head & IP66battery housing


Range of SL125 light-heads to suitintensity requirements

SL125/C5-7nm Complete Marine Lantern Assembly

SL125-1/C-1

SPECIFICATIONS•

Light CharacteristicsLight Source SL125 Series LED LanternAvailable Colours Red, Green, White, Yellow, Blue

Peak Intensity (cd) Refer to table on previous pageVisible Range (nm) 5-7




Electrical CharacteristicsCurrent Draw (mA) Refer to table on previous pageCircuit Protection Reverse polarityNominal Voltage (v) 12


Solar CharacteristicsSolar Module Type MulticrystallineOutput (watts) 20 (SL125-1 and SL125-2 configurations)

40 (SL125-3 and SL125-4 configurations)Solar Module Efficiency (%) 14






/8

Lens Design External optics with interior flute designMounting 200mm OD base patternHeight (mm/inches) From 665 / 261

/4


Mass (kg/lbs) From 18 /395/8


CertificationsCE EN61000-6-3:2001. EN61000-6-1:2001. EN55022. EN61000-4-2:1995. EN61000-4-3:2002.

USCG specification HSCG23-05-R-E43013, including Change 1.Quality Assurance ISO9001:2000

Waterproof IP68 light-head. IP66 battery compartment



Options Available Single or dual solar module(s) Hard-wire or GPS synchronisation Remote monitoring (via GSM cell-phone- SL125/C-GSM) or control (via radio- SL125/C-RC) capabilities Note - remote monitoring/control will reduce visible range of lantern due to increased power

consumption



SL1255-7nm LED Marine Lantern Series


Bird deterrentspike

New LED lens and Sealite’s360° OmnidirectionalLED Reflector(US Pat. No. 6,667,582.AU Pat. No. 778,918)

Automatic nightactivation


Radio Control

Lens and basemoulded fromUV-stabilisedLEXAN®polycarbonate(IP68 rating)

Large industrystandard 200mmOD base pattern

The SL125 LED marine lantern is maintenance-free and used by many of theworld’s busiest ports, and largest militaries.


SL125 Technology

The SL125 is the most advanced LED marine lantern on the market. Utilising the latestsoftware and microcircuitry developments, the lantern boasts a huge number offeatures including flash-memory and the most efficient power conversion available.

The tough polycarbonate lens is specifically designed for use with LEDs, andincorporates an environment-friendly spike - deterring unwelcome bird life.

The unit is sealed using polycarbonate bonding compounds similar to those used bymajor automobile manufacturing companies. This also enables a waterproof rating ofIP68 - unmatched by other manufacturers.

Available with up to 4tiers of ultra-high intensityLEDs(36 LEDs per tier) forincreased light intensity


Lantern Operation

The SL125 is ideal to fit on existing structures, or can be supplied as a complete unit withexternal solar modules and battery compartment.


Operates in conjunctionwith existing or purpose-built power supplies

Installs in minutes &operates maintenance-free

The large industry-standard base, and 1 metre of included cable allows the SL125 to bereadily fitted to any 12 volt power supply.

Once installed, the SL125 requires no operator intervention. The flash characters areeasily adjusted on-site by the user, and the lantern will automatically begin operation atdusk - once the ambient light threshold drops sufficiently.

IP68 waterproof


SL125, Brazil installation

SL125-4SL125-1


SL125-2 SL125-3

Up to 4 tiers of 36 LEDs are available to increase the light intensity of the SL125 unit.

The SL125-2, SL125-3 and SL125-4 have 72, 108 and 144 LEDs respectively.

Each LED tier utilises the Sealite omnidirectional LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918) to increase theintensity and uniformity of the horizontal output.

Multiple focal points on the lens then create superior divergence specifications to suit regulations worldwide.

Optional GPS Synchronisation (SL125-GPS)

The SL125 lantern series are also available with optional GPS synchronisationenabling users to clearly mark channels, ports, rivers and entrances, marinas,aquaculture installations and exclusion zones with independent lanterns whichflash in synchronisation.

When lanterns flash in synchronisation, they can be clearly distinguished fromother navaids and confusing background lighting.

Optional RF Communication Synchronisation (SL125-CS)

The SL125 is now available with optional short-range RF communicationsynchronisation.

Two (2) or more lights can be synchronised to flash in unison via an internal RFmodule - ideal for rivers, marina entrances, channel marking and aquaculture.

Optional GSM Remote Monitoring (SL125-GSM) and AIS Integration(SL125-AIS)

The SL125 lantern series may also be fitted with GSM or AIS remote monitoringsystems - enabling users to access real-time diagnostic data remotely. AISintegration also enables crucial Message 21 information to be broadcast tomariners within the region.

The SL125 4-Tier lantern utilisesa unique heat-dissipatingdomed lens to achievemaximum LED intensityoutput over a wider range ofenvironmental conditions.

Optional Remote Radio Control (SL125-RC)

Radio control may be fitted to SL125 series products enabling users to remotelymodify the setup of their lantern via handheld radio controller.

For example, the operator can remotely change between different coloured LEDbanks (to change the colour of the light), turn their lights ON and OFF, or changethe flash setting. Perfect for remote traffic control and to designate an area ofactivity.

In addition, each LED arrayincorporates temperaturecontro l mechanisms toensure maximum operationalperformance.

SL125-4 pylon installation, Israel SL125/C lanterns mark wharf entrance, Bandar Abbas, Iran SL125 installed on buoy, Newcastle, Australia


SPECIFICATIONS •

Description PeakIntensity Current DrawModel Flashing(cd) Colour LEDs Voltage

(Amps)

SL125-1.R 1 Tier LED Marine Lantern 114 RED 36 0.42 12v

SL125-1.G 1 Tier LED Marine Lantern 93 GREEN 36 0.32 12v

SL125-1.W 1 Tier LED Marine Lantern 168 WHITE 36 0.32 12v

SL125-1.Y 1 Tier LED Marine Lantern 88 YELLOW 36 0.42 12v














Intensity(cd)

Range (km)AT = 0.74

Range (nm)AT = 0.85

Range (nm)AT = 0.74

1 1 1.1 1.9

5 2 2.3 3.7

15 3 3.5 5.6

25 3.6 4.3 6.7

35 4 4.8 7.4

45 4.3 5.3 8.0

55 4.6 5.7 8.5

65 4.8 6 8.9

75 5 6.2 9.3

85 5.2 6.5 9.6

95 5.4 6.8 10.0

110 5.5 7.1 10.2

150 6 7.8 11.1

200 6.5 8.5 12.0

270 7 9.3 13.0

360 7.5 10.1 13.9

490 8 11 14.8

640 8.5 11.8 15.7

835 9 12.6 16.7

1080 9.5 13.4 17.6

1400 10 14.2 18.5

AT = Atmospheric Transmissivity

When a light beam passes through the atmosphere the atmospheric

transmissivity factor indicates how much light is absorbed by the

atmosphere.

For example, when AT = 0.85 this means that 85% of the original

light intensity is visible after 1nm. Consequently 15% of light is lost to

atmospheric absorption.

SL125-1 SL125-2 SL125-4

SL125-3

5-7nm LED Marine Lantern SeriesSL125

SPECIFICATIONS•

Light CharacteristicsLight Source SL125-1 (36 ultra-high intensity LEDs)

SL125-2 (72 ultra-high intensity LEDs)SL125-3 (108 ultra-high intensity LEDs)SL125-4 (144 ultra-high intensity LEDs)

Available Colours Red, Green, White, Yellow, Blue



Vertical Divergence (degrees) 9 (optional 3 degree divergence for extended visible range of 10nm)Reflector Type Omnidirectional 360° LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918)Available Flash Characteristics Up to 256 IALA recommended (user adjustable)Intensity Adjustments Adjustable in 25% incrementsLED Life Expectancy (hours) >100,000

Electrical CharacteristicsCurrent Draw (mA) Refer to table on previous pageCircuit Protection IntegratedNominal Voltage (v) 12

Temperature Range -40 to 80oC

Physical CharacteristicsBody Material LEXAN® Polycarbonate – UV-stabilisedLens Material LEXAN® Polycarbonate – UV-stabilised


Lens Design External optics with interior flute designMounting 200mm OD base pattern

Height (mm/inches) SL125-1: 205 / 81/8

SL125-2: 240 / 91/2

SL125-3: 240 / 91/2

SL125-4: 240 / 91/2


Mass (kg/lbs) From 1.1 / 23/8




Waterproof IP68



Options Available Hard-wire or GPS synchronisation Remote monitoring (via AIS, or GSM cell-phone- SL125-GSM) or control (via radio- SL125-RC) capabilities Add i t iona l cab le Note - remote monitoring/control will reduce visible range of lantern due to increased power

consumption



SL125/C-Type 25-7nm Complete Marine Lantern Assembly



New

LED lens andSealite’s 360°OmnidirectionalLED Reflector(US Pat. No. 6,667,582.

AU Pat. No. 778,918)


Radio Control

Lens mouldedfrom UV-stabilisedLEXAN®polycarbonate(IP68 rating)

Adjustable solarmodule(s) angledt o m a x i m i s esolar

collection

Large industrystandard 200mm ODbase pattern

__________ Largeuser-replaceable55Ah battery in 7-stagepowder-coatedaluminium housing(IP66)

The SL125/C-Type 2 Complete Lantern Assembly incorporates a larger batteryhousing to the standard SL125/C Assembly, enabling even great autonomyparticularly in lower sunlight regions.

The SL125/C-Type 2 offers unique flexibility, and is available in varying configurationsto suit a range of installation and intensity requirements. The powder-coated 3mmaluminium housing is laser-cut, and robotically folded for guaranteed precision everytime.


Complete lanternassembly with largebattery housing for lowsunlight regions or highduty cycles

SL125 light-head availablewith up to 4 tiers of ultra-high intensity LEDs (36 LEDsper tier) for increased lightintensity


One or two 40watt solar module(s) are fitted to power longer-range requirements orancillary equipment, with large 55Ah battery.

A modular design, all components of the system are replaceable in the unlikely event ofdamage to the unit.The battery is accessed through the top of the lantern assembly, viaa robust swing-hinge.

Access to the user-adjustable flash and intensity settings is also achieved through thisdesign.

The solar modules are extendable to 51 degrees as standard, with the option to increasein equatorial regions.




IP68 light head & IP66battery housing


SL125-1/C-1.T2 SL125 1-Tier. Complete Lantern Assembly. Single 40w Solar Module.

SL125-1/C-2.T2 SL125 1-Tier. Complete Lantern Assembly. Dual 40w Solar Modules.







ORDERCODES

Eg. SL125-3/C.T2-2-GPS.G

Denotes SL125 3-TierComplete Type 2Lantern Assembly. DualSolar Modules. GPSSynchronisation. GREEN.

SL125/C lanterns installed at marina, Venice, Italy

Range of SL125 light-heads to suitintensity requirements

SL125/C-Type 25-7nm Complete Marine Lantern Assembly

SL125-1/C-1.T2

SPECIFICATIONS •

Light CharacteristicsLight Source SL125 Series LED LanternAvailable Colours Red, Green, White, Yellow, Blue





Electrical CharacteristicsCurrent Draw (mA) Refer to table on previous pageCircuit Protection Reverse polarityNominal Voltage (v) 12


Solar CharacteristicsSolar Module Type MulticrystallineOutput (watts) 40 or 80

Solar Module Efficiency (%) 14






/8

Lens Design External optics with interior flute designMounting 200mm OD base patternHeight (mm/inches) From 570 / 221

/2


Mass (kg/lbs) From 18 /395/8




Waterproof IP68 light-head. IP66 battery compartment



Options Available Single or dual solar module(s) 80Ah battery (SL125/C.T2/80Ah) 60watt solar module (single or dual configurations) Hard-wire or GPS synchronisation Remote monitoring (via AIS, or GSM cell-phone- SL125/C.T2-GSM) or control (via radio- SL125/C.T2-RC)

capabilities Extended base post Note - remote monitoring/control will reduce visible range of lantern due to increased power

consumption

Specifications subject to change or variation without notice * Subject to standard terms and conditions

SL-CGA 1252WClass‘A’LEDLantern

NewNow availablewith internal RFComm-Synch

No cabling

Wirelesssynchronisationof flashing lights

The SL-CGA 1252W is aUnited States Coast Guardapproved Class ‘A’ structurelantern specifically designedto meet the needs of Class‘A’ structures in the Gulf ofMexico.


The lantern utilises 72 LEDsas a light source, enhancedby Sealite’s LED lens andomnidirectional LED reflector (USPat. No. 6,667,582. AU Pat. No.778,918) to gain optimum LEDperformance.

The SL-CGA 1252W is one of themost advanced LED marinelanterns on the market. Utilizingthe latest software and microcircuitry developments, thelantern boasts a huge number offeatures including flash-memoryand the most efficient powerconversion available.


Automaticnightactivation


Lens and basemoulded from UV-stabilised LEXAN®polycarbonate

200mm ODbase pattern

The Sealite AdvantageThis lantern is available in a hard-wired

(SL-CGA 1252W-S), RF (SL-CGA 1252W-CS) or GPSsynchronised

(SL-CGA 1252W-GPS) version for multiple lantern installations U.S. Coast GuardApproved

Lowmaintenance(LEDtechnology)

Easyretrofit onexistingstructures

SL-CGB 1251WClass‘B’LEDLantern

Available with proprietary‘synchronisation’ software

IP68 waterproof

New


Now availablewith internal RFComm-Synch

No cabling


The SL-CGB 1251W is a UnitedStates Coast Guard approvedClass ‘B’ structure lanternspecifically designed tomeet the needs of Class ‘B’structures. Automatic

nightactivation


The SL-CGB 1251W boasts a hugenumber of features includingflash-memory and the mostefficient power conversionavailable. The light utilises 36LEDs as a light source, enhancedby Sealite’s LED lens andomnidirectional LED reflector (USPat. No. 6,667,582. AU Pat. No.778,918) to gain optimum LEDperformance.

The unit is supplied with a 1mtrpigtail for 12v power input, and isideal to fit on existing structures orcan be suppl ied as a completeunit with external solar modulesand battery compartment.


Lens and basemoulded from UV-stabilised LEXAN®polycarbonate

200mm ODbase pattern

This lantern is available in a hard-wired(SL-CGB 1251W-S), RF (SL-CGB 1251W-CS) or GPS synchronised(SL-CGB 1251W-GPS) version for multiple lantern installations

SL-CGA 1252W / SL-CGB 1251WClass ‘A’ and ‘B’ LED Lanterns

SL-CGA1252W

InternalRF Module

SL-CGB1251W

RF Comm-SynchClass A& B Lanterns

SPECIFICATIONS • SL-CGA 1252W SL-CGB 1251W

USCG Approval Class A Class B

Light CharacteristicsLight Source 72 ultra-high intensity LEDs 36 ultra-high intensity LEDsAvailable Colours White White

Effective Intensity (cd) 148 Candela (@ QF 0.3sec ON) 79 Candela (@ QF 0.3sec ON)Visible Range (nm) >5 >3

Horizontal Output (degrees) 360 360

Vertical Divergence (degrees) 9 9

Reflector Type Omnidirectional 360° LED Reflector Omnidirectional 360° LED Reflector

(US Pat. No. 6,667,582. AU Pat. No. 778,918) (US Pat. No. 6,667,582. AU Pat. No. 778,918)Available Flash Characteristics Up to 256 IALA recommended (user adjustable) Up to 256 IALA recommended (user adjustable)Intensity Adjustments Adjustable in 25% increments Adjustable in 25% incrementsLED Life Expectancy (hours) >100,000 >100,000

Synchronisation Optional via Hard-Wire, RF or GPS Optional via Hard-Wire, RF or GPS

Electrical CharacteristicsCurrent Draw (mA) 640 320Circuit Protection Integrated IntegratedNominal Voltage (v) 12 12

Temperature Range -40 to 80oC -40 to 80oC

Physical CharacteristicsBody Material LEXAN® Polycarbonate – UV-stabilised LEXAN® Polycarbonate – UV-stabilisedLens Material LEXAN® Polycarbonate – UV-stabilised LEXAN® Polycarbonate – UV-stabilised

Lens Diameter (mm/inches) 150 / 57/8 150 / 57

/8

Lens Design External optics with interior flute design External optics with interior flute designMounting 200mm OD base pattern 200mm OD base patternHeight (mm/inches) 240 / 91

/2 205 / 81/8

Width (mm/inches) 231 / 91/8 231 / 91

/8

Mass (kg/lbs) 1.2 / 22/3 1.1 / 21

/2

Product Life Expectancy Up to 12 years Up to 12 years

CertificationsCE EN61000-6-3:2001. EN61000-6-1:2001. EN55022. EN61000-6-3:2001. EN61000-6-1:2001. EN55022.

EN61000-4-2:1995. EN61000-4-3:2002. EN61000-4-2:1995. EN61000-4-3:2002.USCG specification HSCG23-05-R-E43013,including Change 1.

USCG specification HSCG23-05-R-E43013,including Change 1.

Quality Assurance ISO9001:2000 ISO9001:2000

Waterproof IP68 IP68

Intellectual PropertyPatents US Pat. No. 6,667,582. AU Pat. No. 778,918 US Pat. No. 6,667,582. AU Pat. No. 778,918Trademarks SEALITE® is a registered trademark of Sealite

Pty Ltd

SEALITE® is a registered trademark of Sealite PtyLtd

Warranty * Full 3 years Full 3 years

Options Available Additional cable Additional cable

Remote monitoring capabilities (AIS, GSM cell-phone)

Remote monitoring capabilities (AIS, GSM cell-phone) RF comm-synch (SL-CGA 1252W-CS) RF comm-synch (SL-CGB 1251W-CS)



U.S. Department ofHomeland Security

United StatesCoast Guard

CommandUnited States Coast Guard

2100 Second Street, S.W.Washington,DC20593-0001Staff Symbol: G-PWN-1Phone: (202) 267-0344Fax: (202) 267-4222Email: [email protected]

16500

MAY 4 7nO6

Mr. Paul GoodwinWatermark Navigation Systems, LLC29 Gifford East DriveGifford, NH 03249

Dear Mr. Goodwin:

The letter is in response to your email of January 26, 2006 requesting approval of your Sealitelanterns for use on Class A, B and C structures.

You are authorized to identify the white SL-CGAI252W as being "U. S. Coast GuardApproved" for Class "A" structures, the SL-CGB1251W as being approved for class "B"structures and the SLCGC6OW as being approved for class "C" structures when operated underthe jurisdiction of the 811i Coast Guard District. This approval is based on test data provided inyour reports from Light Lab International as well as the discussion below:

The white SL-CGAl252W lantern operating with a Quick flash rhythm (0.3 seconds ON) willprovide a minimum effective intensity of 148 candela satisfying the requirements of 125 candelafor class "A" structures. The white SL-CGB125 I W operating with a Quick flash rhythm (0.3seconds ON) will provide a minimum effective intensity of 79 candela satisfying therequirements of 25 candela for class "B" structures. The white SL-CGC6OW lantern operatingwith a Quick flash rhythm (0.3 seconds ON) will provide a minimum effective intensity of 10candela satisfying the requirements of 1 candela for use on class "C" structures.

Sincerely,

/

ARENSTAMommander, U. S. Coast GuardBy directionJ/

SL-CGC 60WClass ‘C’SolarLED Lantern

The most advanced USCG approvedClass C lantern available

Bird deterrentspike

NewLarge internalsolar module

Now availablewith internal RFComm-Synch

No cabling





Moulded fromUV-stabilised virginpolycarbonate

Momentaryswitch(operator pressesthis to obtaindiagnoistics)

IP68 connectorfor diagnostictest lead

Internal user-replaceablebattery in sealedcompartment (IP68 rating)

The SL-CGC 60W is a United States Coast Guard Approved Class ‘C’ structurelantern, specifically designed to meet the needs of Class ‘C’ structures in theGulf of Mexico.


The unit is completely self-contained with an integrated solar/battery system, and canbe easily installed in minutes. The flash characters are adjustable on-site by the user,and the lantern has a permanent ON/OFF storage switch.

During daylight hours the solar module charges the battery, and the lantern willautomatically begin operation at dusk.

The SL-CGC 60W’s large 16Ah battery enables greater than 45 days autonomy. Thebattery is housed in a sealed compartment (IP68 waterproof) allowing for replacementafter years of maintenance-free service.

The IP68 waterproof sealed connector and momentary switch on the lantern enablemaintenance personnel to simply connect a test lead to diagnose the battery voltageand solar charging rate, in accordance to maintenance contracts.

U.S.CoastGuardApproved

Low maintenance (LEDtechnology)


>45 day autonomy

External connector &momentary switch forease of diagnostic testingto meet maintenancecontract requirements

Optional RF Communication Synchronisation (SL-CGC 60W-CS)

The SL-CGC 60W-CS is an RF synchronised version of the popular SL-CGC 60W U.S. CoastGuard Approved Class C lantern.

The large internal dual solar modules and battery ensure reliable operation, with theinternal RF module ensuring all RF lanterns set to the same flashing characteristic flash insynchronisation for clear recognition.

IP68 waterproof

Optional Hard-Wire Synchronisation (SL-CGC 60W-S)

The SL-CGC 60W-S is a synchronised version of the standard lantern. The installer simplyconnects the lanterns using a hard-wired connection to maintain synchronised flashpatterns as required on multiple lantern installations.

The SL-CGC60W Solar LEDLantern is by far the mostaffordable and user-friendlyUSCG Approved Class Clight available in the Gulf ofMexico.

RF Comm-SynchClass C Lanterns

InternalRF Module

SL-CGC 60WClass ‘C’ Solar LED Lantern

SL-CGC 60W

External connector and momentary switch

for ease of diagnostic testing to meet

maintenance contract requirements

SPECIFICATIONS• SL-CGC60W

USCG Approval Class C

Light CharacteristicsLight Source 6 ultra-high intensity LEDsAvailable Colours White

Effective Intensity (cd) 8 Candela (@ QF 0.3sec ON)Visible Range (nm) >1




Synchronisation Optional via hard-wire or internal RF moduleTest Facility Battery voltage, charging current

Electrical CharacteristicsCurrent Draw (mA) MinimalCircuit Protection IntegratedNominal Voltage (v) 3.6

Autonomy (days) >45 (>30 days for SL-CGC 60W-CS)Temperature Range -40 to 80oC

RF Synchronisation +

Frequency 2.5GHz

Range 1.5km between 2 lights, relayedExpandability Peer to peer networkingApprovals FCC / CE

Solar CharacteristicsSolar Module Type MulticrystallineOutput (watts) 1.4 (2.5watt for SL-CGC 60W-CS)Solar Module Efficiency (%) 14


Power SupplyBattery Type High grade NiMH – Environment friendlyBattery Capacity (Ah) 16

Nominal Voltage 3.6

Battery Service Life Average 5 yearsBattery Replacement Via waterproof compartment (user replaceable)



Lens Design External optics with interior flute designMounting 200mm OD base patternHeight (mm/inches) 205 / 81

/8 (240mm / 91/2 inches for SL-CGC 60W-CS)


Mass (kg/lbs) 1.2 / 22/3


CertificationsCE EN61000-6-3:2001. EN61000-6-1:2001. EN55022. EN61000-4-2:1995. EN61000-4-

3:2002.Quality Assurance ISO9001:2000

Waterproof IP68



Options Available RF comm-synch (SL-CGC 60W-CS)


+ SL-CGC 60W-CS model only


SL071-4nm LED Light Fixture





Available with

internal GPS

synchronisation

1mt of cableprovidedfor ease ofinstallation

Lens and basemoulded from UV-stabilised LEXAN®polycarbonate(IP68 rating)

Shown with cut-out lens

The SL07 is an LED Light Fixture designed to offer superior visibility andoperate in conjunction with existing or purpose-built power supplies.

With a variable range of 1 to 4nm, a maintenance-free light source, and 256 user-adjustable flash codes, the SL07 series of LED lights is the preferred choice for buoymanufacturers seeking to fit a marine lantern to existing or independently designedpower sources.


The SL07 is available in a number of configurations, colours and cable lengths and is theperfect replacement for obsolete incandescent lights.

Customers using the SL07 range benefit from Sealite’s optical engineering experience.Precision alignment and focus of the LEDs is made possible through the use of the 360°LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918), increasing the intensity anduniformity of the horizontal output.

The tough UV-stabil ised LEXAN® polycarbonate lens is specifically designed andproduced by Sealite for use with LEDs, and incorporates an environment-friendly spike -deterring unwelcome bird life.

Flash adjustment is achieved via two (2) rotary switches - accessed through the base ofthe unit. For easy installation 1m of cable is supplied as standard.

1-4 nautical mile range

256user-adjustable flashcharacteristics



Sectored blue/white SL07 light up Israel’s largest marina, Herzliya Marina

SL071-4nm LED Light Fixture

SPECIFICATIONS•






Reflector Type Omnidirectional 360° LED Reflector (US Pat. No. 6,667,582. AU Pat. No. 778,918)Available Flash Characteristics Up to 256 IALA recommended (user adjustable)Intensity Adjustments Adjustable in 25% increments

LED Life Expectancy (hours) >100,000





Lens Design External optics with interior flute designMounting 4 x 6mm mounting holesHeight (mm/inches) 141 / 51

/2


Mass (kg/lbs) 0.6 / 11/3




Waterproof IP68



Options Available Hard-wire or GPS synchronisation 50mm pole mount adaptor plate Addi tional cable



SL101-4nm Heavy-Duty LED Light Fixture





Heavy-duty 7-stagepowder-coatedaluminium housing

1mt of cable provided forease of installation


1-4 nautical mile range





The SL10 is a heavy-duty LED Light Fixture designed to operate in conjunctionwith existing or purpose-built power supplies and offer maintenance-freeservice over a wide range of environmental conditions.

With a variable range of 1 to 4nm, a maintenance-free light source and 256 user-adjustable flash codes, the SL10 series of LED lights is the preferred choice of buoymanufacturers seeking to fit a heavy-duty marine lantern to existing or independentlydesigned power sources.

The SL10 is also available in a number of configurations, colours and cable lengths and isthe perfect replacement for obsolete incandescent lights in extreme environments.

Lens assembly

SL10 Dual Pier Lights, Harwich Harbour, United Kingdom


SL101-4nm Heavy-Duty LED Light Fixture

SPECIFICATIONS•









Physical CharacteristicsBody Material 7-stage powder-coated aluminiumLens Material LEXAN® Polycarbonate – UV-stabilised


Lens Design External optics with interior flute designMounting 50mm OD poleHeight (mm/inches) 205 / 81

/8


Mass (kg/lbs) 3 / 62/3






Options Available Hard-wire synchronisation 200mm OD mounting plate Add i t iona l cab le



SL482ft LED Leading Light


46, 92 or 138 ultra-highintensity LEDs

Pressure die-cast marinegrade LM6 aluminiumbody (7-stage powdercoating) and UVresistant polycarbonatelens



Dustproof, rustproof,weatherproof andvandal-resistant(IP66 rating)

Convenient mountingattachment points forease of installation

SL48-2 dual row light

The SL48 is a 2ft LED leading light designed to offer vessels clear nightnavigation, and is a convenient replacement for conventional lead lighting.

The unit is available in 3 configurations utilising either single (SL48-1), dual (SL48-2), ortriple (SL48-3) LED circuits as a light source.

The advanced circuitry of the SL48 series comprise of a DC/DC converter, temperaturemonitoring, current control, and automatic night-activation.

The materials and design of the SL48 provide a high degree of corrosion resistance andare especially suited to corrosive and high humidity atmosphere conditions. The unit isdustproof, rustproof, weatherproof and vandal-resistant.

The body of the unit is made from pressure die-cast marine grade LM6 aluminium,subject to 7-stage powder coating. Single, dual and triple row versions have the samebody width.

A heavy-duty linear prismatic clear lens is securely fixed to the body by stainless-steelsocket head cap screws recessed into the lens moulding. A replaceable single pieceEPDM gasket ensures the high IP66 rating.

The unit operates off a standard 8 - 20 volt power supply, and may be run from a mainspowered system or with solar and battery back-up in the event of power failure.

The SL48 leading light is also available with hard-wire or GPS synchronisation and GSMremote monitoring capabilities. When leading lights flash in synchronisation, they can beclearly distinguished from other navaids and confusing background lighting.


Directional 2ft LED leadinglight

>5.5 nautical mile range


Adjustable intensitysettings


IP66 waterproof

Optional internal GPSsynchronisation & GSMremote monitoring


SL48-2

S P ECI FI CATIO N S • SL48-1 SingleRow SL48-2DualRow SL48-3 Triple Row

Light CharacteristicsLight Source 46 ultra-high intensity LEDs 92 ultra-high intensity LEDs 138 ultra-high intensity LEDsAvailable Colours Red, Green, White, Yellow, Blue Red, Green, White, Yellow, Blue Red, Green, White, Yellow, Blue

Peak Intensity (cd) >120 >210 >370

Visible Range (nm) >5.5 >6.5 >7.5

Horizontal Output (degrees) 15 15 15

Vertical Divergence (degrees) 15 15 15Available Flash Characteristics Up to 256 IALA recommended

(user adjustable)Up to 256 IALA recommended(user adjustable)

Up to 256 IALA recommended(user adjustable)

Intensity Adjustments User-adjustable User-adjustable User-adjustableLED Life Expectancy (hours) >100,000 >100,000 >100,000

Electrical CharacteristicsCurrent Draw (mA) Red, Yellow - 510

Blue, Green, White - 430Red, Yellow - 1020Blue, Green, White - 860

Red, Yellow - 1530Blue, Green, White - 1290

Circuit Protection Polarity protected Polarity protected Polarity protectedNominal Voltage (v) 12 12 12

Temperature Range -40 to 80oC -40 to 80oC -40 to 80oC

Physical CharacteristicsBody Material Pressure die-cast marine grade

LM6 aluminium (7-stage powdercoating)

Pressure die-cast marine gradeLM6 aluminium (7-stage powdercoating)


Lens Material UV-stabilised injection mouldedpolycarbonate

UV-stabilised injection mouldedpolycarbonate


Mounting 4 x 8.3mm mounting holes 4 x 8.3mm mounting holes 4 x 8.3mm mounting holes

Height (mm/inches) 122 / 43/4 122 / 43

/4 122 / 43/4

Width (mm/inches) 137 / 53/8 137 / 53

/8 137 / 53/8

Length 698 / 271/2 698 / 271

/2 698 / 271/2

Mass (kg/lbs) 3.5 / 73/4 3.6 / 77

/8 3.8 / 81/3

Product Life Expectancy Up to 12 years Up to 12 years Up to 12 years

CertificationsCE EN61000-6-3:1997. EN61000-6-1:1997 EN61000-6-3:1997. EN61000-6-1:1997 EN61000-6-3:1997. EN61000-6-1:1997

Quality Assurance ISO9001:2000 ISO9001:2000 ISO9001:2000

Waterproof IP66 IP66 IP66

Intellectual PropertyTrademarks SEALITE® is a registered trademark

of Sealite Pty LtdSEALITE® is a registered trademarkof Sealite Pty Ltd

SEALITE® is a registered trademarkof Sealite Pty Ltd

Warranty * Full 3 years Full 3 years Full 3 years

Options Available Power supplies/systems Hard-wire or GPS synchronisation

Power supplies/systems Hard-wire or GPS synchronisation


Remote monitoring capabilities(GSM)



Additional cable Additional cable Additional cable





92, 184 or 276 ultra-high ___________intensity LEDs

Pressure die-cast marinegrade LM6 aluminiumbody (7-stage powdercoating) and UV resistantpolycarbonate lens


GSM Cell-phone MonitoringDustproof, rustproof,weatherproof andvandal-resistant(IP66 rating)

Convenient mountingattachment points forease of installation


Directional 4ft LED leadinglight

>6.5 nautical mile range


Adjustable intensitysettings


IP66 waterproof

Optional internal GPSsynchronisation & GSMremote monitoring

SL96-2 dual row light

The SL96 is a 4ft LED leading light offering greater visibility to the smaller SL48series.

The unit is available in 3 configurations utilising either single (SL96-1), dual (SL96-2), ortriple row (SL96-3) LED circuits as a light source.

The advanced circuitry of the SL96 series comprise of a DC/DC converter, temperaturemonitoring, current control, and automatic night-activation.

The materials and design of the SL96 provide a high degree of corrosion resistance andare especially suited to corrosive and high humidity atmosphere conditions. The unit isdustproof, rustproof, weatherproof and vandal-resistant.

The body of the unit is made from pressure die-cast marine grade LM6 aluminium,subject to 7-stage powder coating. Singe, dual and triple row versions have the samebody width.

A heavy-duty linear prismatic clear lens is securely fixed to the body by stainless-steelsocket head cap screws recessed into the lens moulding. A replaceable single pieceEPDM gasket ensures the high IP66 rating.

The unit operates off a standard 8 - 20 volt power supply, and may be run from a mainspowered system or with solar and battery back-up in the event of power failure.

The SL96 leading light is also available with hard-wire or GPS synchronisation and GSMremote monitoring capabilities. When leading lights flash in synchronisation, they canbe clearly distinguished from other navaids and confusing background lighting.

Rigby Island Leading Lights,Australia

Tamar River Leading Lights,Tasmania Australia

Port of Melbourne LeadingLights, Australia


SL96-2

SPEC I FI CATIONS • SL96-1 Single Row SL96-2 Dual Row SL96-3 Triple Row

Light CharacteristicsLight Source 92 ultra-high intensity LEDs 184 ultra-high intensity LEDs 276 ultra-high intensity LEDsAvailable Colours Red, Green, White, Yellow, Blue Red, Green, White, Yellow, Blue Red, Green, White, Yellow, Blue

Peak Intensity (cd) >210 >410 >800Visible Range (nm) >6.5 >7.5 8.9Horizontal Output (degrees) 15 15 15

Vertical Divergence (degrees) 15 15 15Available Flash Characteristics Up to 256 IALA recommended

(user adjustable)Up to 256 IALA recommended(user adjustable)

Up to 256 IALA recommended(user adjustable)

Intensity Adjustments User-adjustable User-adjustable User-adjustableLED Life Expectancy (hours) >100,000 >100,000 >100,000

Electrical CharacteristicsCurrent Draw (mA) Red, Yellow - 1020

Blue, Green, White - 860Red, Yellow - 2040Blue, Green, White - 1720

Red, Yellow - 3060Blue, Green, White - 2580

Circuit Protection Polarity protected Polarity protected Polarity protectedNominal Voltage (v) 12 12 12

Temperature Range -40 to 80oC -40 to 80oC -40 to 80oC

Physical CharacteristicsBody Material Pressure die-cast marine grade

LM6 aluminium (7-stage powdercoating)



Lens Material UV-stabilised injection mouldedpolycarbonate



Mounting 4 x 8.3mm mounting holes 4 x 8.3mm mounting holes 4 x 8.3mm mounting holes

Height (mm/inches) 122 / 43/4 122 / 43

/4 122 / 43/4

Width (mm/inches) 137 / 53/8 137 / 53

/8 137 / 53/8

Length 1305 / 513/8 1305 / 513

/8 1305 / 513/8

Mass (kg/lbs) 6.8 / 15 6.9 / 151/8 7.2 / 157

/8

Product Life Expectancy Up to 12 years Up to 12 years Up to 12 years

CertificationsCE EN61000-6-3:1997. EN61000-6-1:1997 EN61000-6-3:1997. EN61000-6-1:1997 EN61000-6-3:1997. EN61000-6-1:1997

Quality Assurance ISO9001:2000 ISO9001:2000 ISO9001:2000

Waterproof IP66 IP66 IP66

Intellectual PropertyTrademarks SEALITE® is a registered trademark

of Sealite Pty LtdSEALITE® is a registered trademarkof Sealite Pty Ltd

SEALITE® is a registered trademarkof Sealite Pty Ltd

Warranty * Full 3 years Full 3 years Full 3 years

Options Available Power supplies/systems Hard-wire or GPS synchronisation






Additional cable Additional cable Additional cable


BargeSafeTM

LED Barge Light

Moulded one-piece handle

Newd

1watt ultra-highintensity LEDAutomatic night

activation

Meets UL 1104Applicable Sectionsfor a 3nm Barge Light

Sealite world-class sectoredLED lens tosuit UL 1104certifiedconfigurations

ConvenientON/OFFswitch

Internal user-replaceable orrechargeablebattery


UL 1104 certified

LED technology

Precise light sectoringachieved via Sealite’sworld-class in-housedesigned lens

3nm visible range

Robust

Installs in seconds

Low power consumption

Lightweight

The Sealite BargeSafeTM range of LED barge lights are certified to UL 1104 with>3nm visible range.

The LED barge light is one of the most advanced in its class, and incorporates a host ofinnovative features designed to make the unit extremely user-friendly.

The world-class LED lens is designed by Sealite and achieves precise intensity andsectoring requirements from a single LED light source. This design helps achieve a loweroperational current compared with alternate LED barge lights - making the unit ultraefficient and offering a battery run time of up to 45 nights.

The light will run from a 6v or 12v dry-cell, or can be supplied with an advancedrechargeable battery pack and charge control ler. Advanced onboard c ircuitryincorporates a DC/DC converter which will maintain the required light source intensityover varying battery voltage.

The barge light casing and handle are injected moulded from UV-stabil isedpolycarbonate – offering enormous impact resistance and long operational life. Thecasings are coloured for easy identification of light output colour.

A magnetic base provides strong fixing in position to the barge deck.

(Yellow required forinland waters)

YW

G

R

G

R

BargeSafeTM

LED Barge Light

Ease of battery re-charge or replacement

SPECIFICATIONS•

Light CharacteristicsLight Source 1x 1watt ultra-high intensity LEDAvailable Colours Red, Green, White, Yellow as per UL 1104Peak Intensity (cd) As per UL 1104Visible Range (nm) > 3nm as per UL 1104Horizontal Output (degrees) Red- 112.5, Green- 112.5, White- 135, Yellow- 225 as per UL 1104Flash Characteristics As per UL 1104 (steady-on & flashing)LED Life Expectancy (hours) >100,000

Electrical CharacteristicsCircuit Protection IntegratedWorking Voltage Range (v) 4 - 16


Power SupplyBattery Type Air Alkaline (recommended), rechargeable battery (optional)Battery Capacity (Ah) 45Ah (Air Alkaline)Nominal Voltage (v) 6v (Air Alkaline)Autonomy (days) >45

Physical CharacteristicsBattery Housing LEXAN® Polycarbonate – UV-stabilisedLens Material AcrylicLens Mount & Top Anodized aluminium

Lens Design Internal single LED cavity with individual sectoring compartments to meet all UL 1104 angles for light outputMounting 4x magnets

195 / 72/3Height (mm/inches)

Width (mm/inches) 172 / 6 7/8

Depth (mm/inches) 108 / 41/4

Mass (kg/lbs) 1.5 / 31/3


CertificationsApprovals UL 1104


Waterproof IP67

Intellectual PropertyTrademarks BargeSafeTM is a trademark of Sealite Pty Ltd

Warranty * 1 year

• Specifications subject to change or variation without notice * Subject to standard terms and conditions

Bridge LightsLED Sectored Lights

This equipment complies with __ requirementsof the U.S. Coast Guard in 33 CFR part 66

o180

o180

o180

The Sealite Advantage256 IALA flash patterns,user-adjustable without theneed for external devices

A range of Sealite marine lanterns may be used to comply with requirementsof lighting bridges and structures extending over navigable waterways.




Typical night marking ofbridge structures generallyincludes;

Red or green flashing lights tomark the navigable limits ofthe channel in accordancewith the IALA MaritimeBuoyage Sys tem locatedon the bridge piers, underthe span, or on buoy andbeacons in the water.

The 107mm Sealite LED lens is available in both positive and negative divergence tocater for elevated mounting positions.

Bridge lights are typically fixed-on, however a choice of over 256 IALA recommendedflash patterns are available as standard.

The lights are available as configured to operate from 12v, 110v, or 240v power, orsupplied as complete solar/battery systems to comply with requirements of regionalgoverning bodies such as the U.S. Coast Guard, or the IALA Recommendations for themarking of fixed bridges over navigable waters.

In U.S. waters for instance, the Coast Guard prescribes certain combinations of fixedlights for bridges and structures extending over waterways. In general, red lights areused to mark piers and supports, and green lights mark the centerline of the navigablechannel through a fixed bridge.

If there is more than one channel through the bridge, the preferred route is markedby three white lights placed vertically. Red lights are also used on some lift bridges toindicate the lift is closed, and green lights to indicate that the lift is open to vessel traffic.

Double-opening swing bridges are lighted with three lanterns on top of the spanstructure so that when viewed from an approaching vessel the swing span when closedwill display three red lights, and when open for navigation will display two green lights.

A ‘best point of passage’indicated by a white light(s)located under the span andexhibiting a safe water markcharacter.

Partitioning of the Sealite LED reflector

allows the lanterns to meet regulatory

requirements.

Contact your local authority for afull description of bridge marking

requirements for your region.

For a copy of the IALARecommendations for the

marking of fixed bridges overnavigable waters please contact

Sealite.

Power Calculator

Sealite’s user-friendly Power Calculator simulateswhether lantern operational status is appropriate for the

designated geographical location.

Lantern intensity readings are also listedwith

the Power Calculator

As a service to it’s valued customers, Sealite software engineers havedeveloped an innovative Power Calculator which enables users to estimateand simulate the expected battery life of their solar marine lanterns givenlocal year-round solar conditions.

Available on request, this software application can be downloaded directly to any PCor notebook enabling users to immediately access system-wide power calculations andintensities for their specific AtoN installation requirements.

Users simply select a Sealite lantern product and any additional options required (suchas GPS synchronisation or GSM remote monitoring), the duty cycle, and the locationof where the product wil l be installed, and then a power calculation is charted. Ifneed be, the user can select a lantern product with a smaller/larger solar and batteryconfiguration to ensure year round operation.

Graphed data clearly demonstrates the average solar hours per day, battery capacityand surplus current readings over the period of a year to ensure the product is suitablefor local conditions.

Intensity readings for the range of Sealite marine lantern products and configurationsare also available from the Sealite Power Calculator.

AISMonitoring System

Battery enclosure in7-stagepowder-coatedaluminium, impactresistant housing

VHF aerial

Adjustablesolar module(s)angled tomaximise solarcollection

Available with up to 4tiers of LEDs (36 ultra-highintensity LEDs per tier)

________ GPS antenna

__________ Large industry standard200mm OD base pattern

The Sealite AdvantageComplete AIS interfacedisplaying accuratepositioning & operationalinformation about the AtoN

Low power consumption,making the units ideal forsolar and AtoN installations

Real time information

New information quality toVTS systems

IALA Recommendations &ITU Publications (ITU-R M.1371-1)

Operates on the VHFMaritime Mobile Band

Enhances operationalawareness

Reduces maintenance &call-out costs

Sealite’s AIS (Automatic Identification System) enabled AtoNs operate on theinternational VHF Maritime Mobile Band, enabling Port Authorities and otherusers to remotely monitor the real-time status of their AtoN installations.

Mariners in the broadcasting region are provided with crucial Message 21 information(as defined by the International Telecommunications Union (ITU)) such as AtoNoperational status and positioning- revolutionizing the VTS system by expanding AtoNinformation availability to mariners worldwide.

The compact AIS AtoN TeleBeacon is available installed within Sealite’s range ofSL125/C Type 2 Complete Lantern Assemblies, as well as the compact SLC600 SolarMarine Lantern, providing installation flexibility and operational reliability for a range ofenvironmental conditions and demanding duty cycles.

Versions of the self-contained TeleBeacon are available without the lantern integration,to enable the benefits of AIS if a visual navaid is not required.

The TeleBeacon interacts with most AIS-enabled charts or radar screens, both at seaand ashore, broadcasting imperative information at regular intervals about the typeand name of the AtoN, as well as GPS position. With these capabilities, Sealite’s AISenabled AtoNs add a new information quality to VTS systems.

In addition, the AIS enabled AtoN broadcasts AIS Message 6 received by thedesignated base station, allowing the operator to monitor the AtoN for solar andbattery voltage, flash code setting, and light status. Meteorological and hydrologicaldata and a host of other parameters can be fitted. Imagine the maintenance andcall-out costs saved every year! This fixed frequency telemetry unit operates on thedesignated AIS1 and AIS2 channels.

Sealite’s AIS enabled AtoNs were developed in technology partnership with MaritecLtd, and in accordance with the International Association of Lighthouse Authorities(IALA) Recommendations, and ITU Publications- creating completely integrated, self-contained AIS enabled AtoNs.

AIS enabledNAUTILUS-2200

AIS enabledTRIDENT-3000

AISMonitoring System

SL125/C.T2 AIS components AIS enabled SLC600 AIS enabled SL125/C.T2

Operational Information Provided to Base Station Uservia PC ICAN Software

Typical Applications AIS & remote monitoring systems Boundary mark ing Scienti f ic research projects Secur ity systems Tra f f i c management Fitted to buoys, beacons &

lighthouses Marking & identifying off-shore

structures (wind farms, oil/gasplatforms etc)

Contents of AIS Message 21 Name o f A toN Type o f AtoN Positioning (latitude & longitude

measurement) ON posit ion/OFF posit ion status T ime Stamp Dimensions of the AtoN & Reference

Positioning

Typical view from port operator console showing vessel data

Contents of AIS Message 6*(Transmitted to Base Station) Light status Bat te ry vo l tage So la r vo l t age

* Additional software upgrade to user base station

required to view message 6. Sealite can provide this

on request.

Typical view from port operator console showing AtoN data, including message 21

(AtoN name / position) and message 6 (lantern diagnostics).

GSM Cell-PhoneMonitoring & Alarm System

CombinedGSM/GPS aerial

Internal GSMMotorola® module ________________________ Shown without lens

Motorola trusted partner


Monitor lantern statususing any cell-phone orSealite’s secure websiteuser-portal login

Reports pre-programmedalarm conditions todesignated cell-phonenumbers


GSMnetwork- universalstandard for mobilecommunication

GSM system usesencryption to makemessages more secure

Low cost interrogation -cost of standard SMS

Internally integratedsystem available with arange of Sealite lanterns tomaintain IP68 waterproofrating

Sealite’s cost effective GSM Cell-Phone Monitoring and Alarm System providesusers with the ability to efficiently monitor the status of their AtoNinstallations via real-rime data from anywhere in the world.

This advanced GSM system (Global System for Mobile Communication) can be internallyintegrated into a range of Sealite lanterns with no external aerials or base stationrequired. Users simply monitor the status of their installations using a cellular telephoneand/or secure web portal access.

The GSM Cell-Phone System works via the international standard, fully digital GSMnetwork - the same network used by millions of cell-phone users worldwide when makingmobile cell-phone calls, and sending SMS and MMS messages. Sealite lanterns fittedwith the GSM Cell-Phone System have an internally integrated Motorola® cell-phonemodule and Seali te proprietary software to enable data transfer between the lanternand designated user’s cell-phone (via SMS message) or PC web interface.

Maintenance personnel simply send an SMS message to the designated Sealite GSMlantern cell-phone number, and then receive an automatic SMS reply detai l ing thevarious pre-set operational conditions. In addition, various alarm conditions can also beactivated such as tracking a drifting buoy via GPS that has moved outside a designatedarea (if mooring is broken etc) or alerting to a potential power disruption.

Sealite’s innovative GSM system may also be setup to regularly report lantern conditionsto a secure user-login portal area of the Sealite website. This provides details of theGSM lanterns operational status, in an easy-to-read PC interface, such as historicalgraphed data, GPS positioning viewed via internet mapping systems, and day-to-dayoperational information about each individual lantern over the period of it’s service life.

The Sealite GSM Monitoring System is secure – unauthorised access to the lantern’s datacannot occur as only the designated cell-phone numbers programmed into the GSMlantern will respond to a remote SMS. In addition, data transferred to and maintained onthe Sealite website is user-password protected.

Each lantern is fitted with it’s own SIM card, which provides a designated cell-phonecontact number for each individual lantern. Any network operator can be usedproviding they have GSM coverage.

Monitoring Conditions Bat te ry vo l tage Solar module charging current Lantern current draw Lantern position - Latitude and Longitude

(including ‘off-station’ facility) Day/night on status Current f lash code sett ing Internal lantern PCB temperature: Normal/High

Available Pre-set Alarms Low batte ry vo l tage High PCB temperature ‘Off-station’ or no GPS data (available when GPS

fitted)

GSM Cell-PhoneMonitoring & Alarm System

Monitor GSM lanterninstallations via Sealite’ssecure website user-login portal

Shows maximumbattery voltage over thelast 24 hour period Shows minimum

battery voltage overthe last 24 hour period

Shows total amount of solarcharge added back into thebattery system over the last 24hour period (dependent onlocal weather conditions)

Click on a specificdate to view theoperational data forthat day in the table

belowSIM card cell-phonenumber (internationalformat eg. +61421777888)

Other table data showsoperational condition ofindividual GSM lanterns

View graphed dataas a yearly chart(365 day report) ormonthly chart

Click “LOCATE ON MAP”to view a map of theposition of the GSM/GPSlanterninstallation

Shows GPSpositioning ofSealite GSM/GPSlantern on internetmapping system

Use navigation toolsto zoom in/out ofinternet map

GPS positioning of GSM/GPS lantern viewed via internet mapping system

‘Off-Station’Alarm Condition

All components of the GSM

receiver/transmitter are

enclosed within the Sealite

lantern body

Using the designatedcell-phone theoperator can setor change ‘off-station’ coordinatesonce the AtoN isdeployed.

If the AtoN movesoff-station, theoperator cancontinue to track

the location of theunit for safe recovery(providing the systemremains in or returnsto an area with GSMcoverage).

Lantern Base

Individual SIM cardsare easily installedwithin the base ofthe GSM lantern

GPS SynchronisationVia Internal GPS Module

Internal GPSreceiver enablingindependentlanterns to flash insynchronisation

Call Sealite for a freeDVD documentary ofthe GPS synchronisedlanterns in operation.

Shown with cut-out lens

Utilising latest advancements in GPS technology, Sealite has developed aninternal synchronisation system which can be incorporated into a range ofSealite lanterns.

The Sealite Advantage Synchronisation of

independently flashinglanterns to clearly markchannels and entrances

Sealite’s GPS system provides users with the ability to mark a channel, port or river withindependently operating lanterns that all flash in synchronisation. This presents a clearoutline of the channel each time the lanterns flash, and is particularly effective inovercoming background lighting.

The Global Positioning System (GPS) receiver is housed within the Sealite lantern andno additional power supplies, aerials or control systems are required. This lanternoption is microprocessor-based and has been designed to provide maximum reliabilityand performance of the lantern over a wide range of environmental conditions.

Using overhead satellites, multiple GPS lanterns set to the same flash pattern willsynchronise anywhere in the world.

No limitations on distanceor objects betweenlanterns

How does it work? Inbuilt allowing for easy

installation

Each light operatesindependently andrequires no operatorintervention

Three (3) satellites needto be in view for the built-in GPS receiver to collecttime data

Synchronisation is achieved using an internal algorithm based on the highly accuratetime base and time data received from the satellites. The satellite data is providedfrom a number of earth stations using atomic clocks as the time base. At power-up themicroprocessor checks that the internal GPS module is programmed correctly and isable to provide valid time base and time data.

The light then checks for day/night. If it is daylight the internal microprocessor will go toidle mode after approximately 10 seconds to reduce power consumption.

SeaFlareTM Technology

The inbuilt GPS receiver and advanced software of the Sealite synchronised lanternsallow for the adoption of SeaFlareTM channel marking - a unique system that cascadesthe synchronisation of channel lanterns in a uni or bi-directional flash pattern.

In Australia, the Port of Melbourne Corporation has adopted this technology fromSealite to clearly identify the channel leading into Station Pier - an area that regularlyaccommodates some of the world’s largest passenger vessels including the QE2.

The neighbouring Port of Geelong utilise this technology to safely guide Afromax Tankersamong other large sized vessels into harbour.

Synchronised SL125-GPS lanterns, Port of Melbourne, Australia

RF SynchronisationVia Internal RF Module

New

InternalRF Module

RF Comm-SynchSL70 Lanterns

The Sealite AdvantageThis latest innovation is designed to offer a low-cost synchronisation optionfor applications including rivers, estuaries, marina entrances, channelmarking and aquaculture, and can be fitted to a range of Sealite lanterns.

Synchronisation benefits vessel operators at night by illuminating the boundary orchannel as a clear passage on entrance as opposed to indiscriminant flashing lightswhich may render the judgment of distance difficult.

Easy to use – simply setlights to the same flashpattern & they will comeinto synchronisation

Clear channel outlineachieved through lightsflashing in unison

Internal RF module – noexternal components

Up to 1.5 km operationalrange between lights –extended by each lightrelaying the message

How does it work?

RF Comm-Synch products are fitted with an internal RF module, which operates on a2.4GHz frequency and has an operational range of 1.5km between 2 lights.

Should more than 2 lanterns be required to be synchronised the range may beextended for longer distances as each lantern transmits the data to all adjacentlanterns - causing them to fall into synchronisation. The only limitation is that no lanternshould be more than 1.5km from the next lantern in the series.

RF Comm-Synch lanterns operate within a peer-to-peer network topology andtherefore are not dependent upon master/slave relationships. This means that lightsremain synchronised without use of master/slave configurations and each lantern inthe network shares both the roles of master and slave.

Low-costUsing innovative software, the additional power consumption is minimal, and in mostconfigurations the solar lantern requires only 1.5hrs of direct sunlight per day to retainfull working autonomy.

Typical Applications

Channe l markers

Mar ina entrances

Aquacu l ture zones

Per imeter marking

Perfect for Aquaculture, MarinaEntrances, & Channel & Perimeter

Marking

Synchronisation isrecommended for lanternsoperating with up to 20%duty cycles and in regionswhere typical solar irradiationaverages 1.5Kwh per day.Flash characters exceedingthis may require lanternintensity adjustment.

Synchronisation is achievedvia short-range RFcommunication betweenlanterns, and relies online-of-sight operation.

RadioMonitoring & Control System


Cost effective

Unique identifier makingit possible to activate andmonitor each individuallantern separately

Portability

No base station or externalaerials (for radio controlledlanterns) required

An intelligent system withpractically unlimitedoperational range(lanterns relay themessage to other lanternsvia networking system)

Sealite’s Radio Control System is designed to permit port and marina

authorities to directly control the operation of singular or groups of lanterns.

Controlled by a menu drive 2.4GHz handheld transceiver or PC interface, lanterns maybe:-

Act ivated or deac t ivated

Flash character changed to any of the 256 codes available

Intensity adjusted up to 8 levels

Lanterns set to group flash synchronisation

Lantern colour changed from green to red and other combinations (up to 3 differentcolours controlled independently)

Sealite’s innovative PC interface for the radio control system displays all operator controlfields in one easy-to-view and easy-to-select screen. With the handheld radio controller

connected to the PC via serial port, the user simply selects the setup fields and sendsthe ICD Message to the designated lanterns.


Waterway control of traff ic

Indication of periodic closure to designated areas to marine traffic

Warnings of discharging of hazardous material

RadioMonitoring & Control System

RF Aerial

LCD screen

Batteryrechargeand PCinterfaceconnection

Press buttonsto select andcontrol lightparameters

Integrated battery

Remotely turn lightsON/OFF, or set tolantern light sensor

Set radio lightsinto groups forindependentcontrol

Switch betweendifferent colouredLED banks

The Sealite short-range radio controller can be supplied with aPC interface, allowing users to control light operations from anotebook or desktop computer.

SPECIFICATIONS•

Electrical CharacteristicsRange 1.5km, peer-to-peer networkingTemperature Range -40 to 80º CFrequency 2.4GHzNominal Voltage 7.2V dcAutonomy (days) 14

Power SupplyBattery Type High grade NiMH - Environment friendlyBattery Capacity 16AhBattery Voltage 7.2V dc

Physical CharacteristicsCase Material Anodized aluminiumScreen BacklitLife Expectancy Up to 12 years

CertificationsCE EN61000-6-3:1997. EN61000-6-1:1997Quality Assurance ISO9001:2000

Intellectual PropertyTrademarks SEALITE® is a registered trademarke of Sealite Pty Ltd

Warranty * 1year



WindTalkerTM

Solar-Powered Ultrasonic Anemometer with GSM

Ultrasonic anemometer

Reports wind speedand direction viaSMS text message todesignated mobilephones and PC’s

4 x 10watt multicrystallinesolar modules, ensuringmaximum light collectionto charge the battery Internal user-

replaceable 55Ahbattery


Monitor wind speed &direction using any cell-phone or Sealite’s securewebsite user-portal login

Completely self-contained


GSMnetwork- universalstandard for mobilecommunication

Corrosion free, UV-stabilised material

All weather sensingtechnology

True 0-359° operation (nodead band)

Ideal for applications thatdemand economic windsensing

Sealite’s WindTalkerTM is a solar-powered ultrasonic anemometer whichenables users to remotely access real-time and historical data about the windspeed and direction at the location of their installation via cell-phone (SMSmessage) or PC web portal interface.

The four 10watt multicrystalline solar modules recharge the internal housed battery topower the ultra-sonic anemometer - allowing the unit to be completely self-containedand operate independent from other power sources.

Designated users, such as maintenance personnel, simply send an SMS text messageto the wind monitor, and receive an automatic reply from the unit indicating accuratewind speed and direction.

The WindTalkerTM has an internally integrated Motorola® cellphone module and Sealiteproprietary software to enable data transfer between the unit and designated user’scell-phone (via SMS message) or PC web interface.

In addit ion various alarm condi t ions such as high wind speed (user-selectableparameters) and low battery voltage, and daily status reports can also be activated asrequired.

Sealite’s innovative GSM enabled WindTalkerTM may also be setup to regularly reportwind conditions to a secure user-login portal area of the Sealite website. This providesdetails of the WindTalkerTM wind speed/direction in an easy-to-read PC interface.

Each WindTalkerTM is fitted with it’s own SIM card, which provides a designated cell-phone contact number for each individual installation. Any network operator can beused providing they have GSM coverage. The ultrasonic anemometer is corrosion-free,and utilises all-weather sensing technology – making the unit ideal for land-based andmarine environments.


Agr icu l tur e

HVAC

Pollution control

Portable weather stations

Roadside weather stations

Tunne ls

Marine

WindTalkerTM

Solar-Powered Ultrasonic Anemometer with GSM

Wind report shows the average

wind speed and direction

readings over 2 minutes are

5knots North 357 degrees

Average wind gust over 10 minutes

is 14knots North 11 degrees

SMS text message with Wind Report

SPECIFICATIONS •

Anemometer CharacteristicsWind Speed Range 0-116 knotsWind Direction Range 0-359° (no dead band)Operating Temperature 35°C to +70°CMoisture Protection IP65External Construction PolycarbonateNMEA O/P YesCharging Internal regulator

Electrical CharacteristicsCurrent Draw (mA) 50mA at 12v (approx)Circuit Protection IntegratedNominal Voltage (v) 12Autonomy (days) 36

Temperature Range 40 to 80oC



Power SupplyBattery Type SLA (Sealed Lead Acid)Battery Capacity (Ah) 55Nominal Voltage (v) 12


Physical CharacteristicsBody Material Rotationally moulded UV-stabilised virgin polyethyleneMounting 4x 11mm mounting holes

928 / 361/2Height (mm/inches)

Width (mm/inches) 560 / 22Mass (kg/lbs) 19 / 413

/4


CertificationsCE EN61000-6-2:2001. EN61000-6-3:2001Quality Assurance ISO9001:2000

Intellectual PropertyTrademarks SEALITE® is a registered trademark of Sealite Pty Ltd

Warranty *1 year



SLB600 / SLB610600mm dia. Marker Buoy

Optional solar lightavailable

Rotationallymoulded to 7mmwall thickness

Made from strong,durable UV-stabilisedvirgin polyethylene

SLB600 SLB610

Foam filled withhighly buoyantclosed-cellpolyurethane

The SLB610 has an increased floatsection for additional buoyancy -

aiding in deeper water installations.

Large mooring chainattachment pointaccommodates16mm shackle or12mm silver rope

Stainless steelmooring bush


High visibility red, green,white or yellow as per IALArecommendations

Range of mooringequipment & chainavailable

The SLB600 is a short-range buoy ready for immediate installation. Typicalapplications include day and night channel, speed zone and restricted areamarking.

The SLB600 is extremely long-lasting, and is moulded from strong, durable UV-stabilisedpo l y et hy l ene . A l a rg e moo r i ng cha i n at t achment po i n t ac commoda t e s a 16mmshackle or 12mm silver rope.

The complete assembly is only 16kg (35lbs). The unit is available in standard high visibilityYellow, Green, Red and White.

16mm shackle or 12mmsilver rope attachmentpoint

Excellent buoyancy &stability

Mould-in signage to suitcustomer requirements

One of 165 units installed as perimetermarking, Saudi Arabia

Range of mould-ingraphics such as“5 Knots” available

SLB600 / SLB610600mm dia. Marker Buoy

SLB600 SLB610

SPECIFICATIONS • SLB600 SLB610

General CharacteristicsAvailable Colours Red, Green, White, Yellow

as per IALA RecommendationsRed, Green, White, Yellowas per IALA Recommendations

Focal Plain Height (mm/inches) 965 / 38900 / 351/2

Total Reserve Buoyancy (kg/lbs) 28 / 6214 / 31

Draft, Typical (mm/inches) 305 / 12275 / 10 3/4

Maximum Mooring Load (kg/lbs) 28 / 6214 / 31

Physical CharacteristicsMaterial Rotationally moulded UV-stabilised virgin

polyethyleneRotationally moulded UV-stabilised virginpolyethylene

Wall Thickness (mm/inches) 7 /1/47 /1

/4

Ballast (kg/lbs) 6 / 13 internal concrete6 / 13 internal concreteFilling Closed-cell polyurethane foamClosed-cell polyurethane foamHeight (mm/inches) 1135 / 442

/31075 / 421/3

Width (mm/inches) 550 / 212/3550 / 212

/3

Mass (kg/lbs) 18 / 4016 / 35

Product Life Expectancy Up to 12 yearsUp to 12 years

CertificationsQuality Assurance ISO9001:2000ISO9001:2000

Intellectual PropertyTrademarks SEALITE® is a registered trade mark of

Sealite Pty LtdSEALITE® is a registered trade mark ofSealite Pty Ltd

Warranty * 1 year1 year

Lantern Options Sealite SL15, SL60 or SL70 lanternSealite SL15, SL60 or SL70 lantern

Accessory Options Mould-in graphics Mould-in graphics

Sealite IALA recommended top marks Sealite IALA recommended top marks Radar reflector Radar reflector



SLB700700mm dia. Marker Buoy

Optional solar lightavailable



Interconnectedmooring & liftingeye for additionalstrength



Large mooring chainattachment pointaccommodates16mm shackle or12mm silver rope

The Sealite AdvantageSLB700 shown with permanent

mould-in graphics


Range of mooringequipment & chainavailable

The SLB700 is a short-range buoy ready for immediate installation. Typicalapplications include day and night channel, speed zone, restricted areamarking and aquaculture.

The SLB700 is extremely long-lasting, and is moulded in strong, durable UV-stabilisedpolyethylene. A large mooring chain attachment point accommodates a 16mmshackle or 12mm silver rope.


Mould-in signage to suitcustomer requirements

The SLB700 incorporates an interconnected mooring and lifting eye for additionalstrength, and enables a wider range of installations than the smaller SLB600.

The SLB700 is substantially larger than the SLB600, with approximately twice thebuoyancy. The top section of the SLB700 has 3 threaded studs, moulded into the buoy toenable easy mounting of either the SL15 1nm, or SL60 or SL70 2nm Solar Lights.

The SLB700 can be economically shipped around the globe, with approx. 105pcs and210pcs being packed in 20ft and 40ft shipping containers respectively.

Range of mould-in graphicssuch as “No Boats” available

SLB700700mm dia. Marker Buoy

SPECIFICATIONS •

General CharacteristicsAvailable Colours Red, Green, White, Yellow as per IALA RecommendationsFocal Plain Height (mm/inches) 1265 / 493

/4

Total Reserve Buoyancy (kg/lbs) 60 / 132Draft, Typical (mm/inches) 240 / 91

/2

Freeboard (mm/inches) 190 / 71/2

Maximum Mooring Load (kg/lbs) 60 / 132

Physical CharacteristicsMaterial Rotationally moulded UV-stabilised virgin polyethylene

Wall Thickness (mm/inches) 7 /1/4

Ballast (kg/lbs) 18 / 40 internal concrete

Filling Closed-cell polyurethane foamHeight (mm/inches) 1450 / 571

/8


Mass (kg/lbs) 33 / 73Product Life Expectancy Up to 12 years

CertificationsQuality Assurance ISO9001:2000

Intellectual PropertyTrademarks SEALITE® is a registered trade mark of Sealite Pty Ltd

Warranty * 1 year

Lantern Options Sealite SL15, SL60 or SL70 lantern

Accessory Options Mould-in graphics Sealite IALA recommended top marks Radar reflector



SLB12501250mm dia. Navigation Buoy

Optional top marksand lights available


Rotationally mouldedto 9mm (float section)and 7mm(top section)wall thickness

Foam filled with highlybuoyant closed-cellpolyurethane

316 grade stainless-steel mooring post with18mm mooring eye

The Sealite AdvantageComplete unit- ready forimmediate installation


High night & day visibility

316-grade stainless-steeleye bolt for strong mooringchain attachment point


The SLB1250, 1250mm dia. Navigation Buoy, has proven it’s superiorperformance in many parts of Australia and around the world for long-rangeriver and sea navigation.

The base is moulded in one-piece strong, coloured, durable polyethylene - filled withhighly buoyant polyurethane and UV-stabilised for resistance to sunlight.

The strong, lightweight polyethylene buoy top is moulded in standard IALA high visibilitycolours and shapes to suit a range of installation requirements.

A powder-coated extension pole may be supplied to increase the focal height of theSealite lantern, as well as an additional base section for extra buoyancy.

For superior night visibility the SLB1250 may be fitted with a one, two, three or fournautical mile Sealite LED marine lantern.

Brass inserts provide a secure mounting for top, tower and signs. A 316-grade stainless-steel eyebolt passes through the base providing a strong mooring chain attachmentpoint.

In addition, all hardware and fittings are 316-grade stainless-steel.

Manila Philippines installation

SLB12501250mm dia. Navigation Buoy

SPECIFICATIONS •


/3 (light mounted below top mark), 2050 / 80 3/4 (light mounted above top mark)Total Reserve Buoyancy (kg/lbs) 230 / 507Draft, Typical (mm/inches) 370 / 141

/2



Physical CharacteristicsMaterial Rotationally moulded UV-stabilised virgin polyethylene, 316-grade mooring poleWall Thickness (mm/inches) 9 /3

/8

Ballast (kg/lbs) 30 / 66 external counter-weight (optional)Filling Closed-cell polyurethane foamHeight (mm/inches) 1180 / 461

/2





Warranty * 1 year

Lantern Options Sealite SL15, SL60, SL70, SLC310 or SLC420 lantern

Accessory Options Mould-in graphics Sealite IALA recommended top marks External ballast Remote monitoring (GSM cell-phone) Double base configuration for even greater buoyancy (SLB1250-DB) Radar reflector



Available in a range of IALA colours and

configurations, optional mould-in graphics and with

a wide range of IALA recommended Top Marks

TRIDENT-30003000mm dia. Ocean Buoy

Navaid location

New Guard rail

Now available withpoly-tower section andday marks for increased

visibility

316-gradestainless-steeltower assembly

Accessladder

__________ Internal 10m2

radar reflector

Rotationallymoulded to18mm wallthickness




3mtr diameter

5mtr focal height

Robust construction of 4quadrant hull sections

Lightweight

Large battery & payloadsection


Easy to deploy & service

100% recyclable

No painting, ever

Cost effective &environmentally friendly

Convenient forklift accesspoints to safely maneuverthe buoy assembly

The Trident-3000 is one of the largest rotationally-moulded buoys available,with a float diameter of 3 meters and lantern focal height of up to 5 meters.

The float section of the Trident-3000 is built from four (4) roto-moulded quadrants, whichfasten together to form an incredibly robust 3 meter wide float section standing 1.8mtall. Each quadrant is moulded from UV-stabilised virgin polyethylene, and has an 18mmwall thickness. In addition, each section is filled with closed-cell polyurethane, whichprevents the ingress of moisture in the unlikely event of damage.

A 316-grade stainless-steel mooring pole runs through the centre of the assembly, towhich the tower section is fastened. Two large lifting eyes aid in buoy mooring andperiodic servicing.

The four-sided tower section of the Trident-3000 provides unsurpassed strength, and isfabricated from 316-grade stainless-steel – providing an estimated lifespan in excess of20 years.

Rotationally moulded paneling is fitted to the outside of the tower section tocreate a large, coloured visual area for marking. The replaceable paneling alsosimplifiescardinal marking, and gives operators flexibility in stocking spare components. No partof the structure requires painting at any stage of the products lifespan.

An integrated ladder with harness attachment points runs vertically up the tower to thetop platform. The internal top operational platform is designed to provide a safe workingarea for contractors.

The buoy is lightweight, and can be rested upright on the vessel deck for ease ofdeployment and final inspection.

A large counterweight offers exceptional stability in a variety of exposed regions.

The Trident-3000 can be supplied in all IALA colours, and side-panelling is available toaid in clear lateral marking – creating a huge visual area.

TRIDENT installation, Westernport Bay

EnvironmentallyFriendly & CompletelyRecyclable

Sealite buoy products are made from

100% recyclable materials. As a service

to customers, individual components and

products at the end of their service life maybe returned to Sealite for recycling.

TRIDENT-30003000mm dia. Ocean Buoy

Shown withpoly-tower

SPECIFICATIONS•

General CharacteristicsAvailable Colours Red, Green, White, Yellow as per IALA RecommendationsFocal Plain Height (mm/inches) 5000 / 196Total Reserve Buoyancy (kg/lbs) 6500 / 14317

Draft, Typical (mm/inches) 1700 / 667/8

Freeboard (mm/inches) 1200 471/4 to 300 / 113/4


Physical CharacteristicsMaterial Rotationally moulded UV-stabilised virgin polyethylene float section, 316-grade stainless-steel mooring

pole, 316-grade stainless-steel tower assembly, rotationally moulded UV-stabilised virgin polyethylenetop marks and panelling18 /3

/4Wall Thickness (mm/inches)Ballast (kg/lbs) 600 / 1322 external steelFilling Closed-cell polyurethane foamHeight (mm/inches) 6690 / 2632

/3


Mass (kg/lbs) 2050 / 4515 (depending on payload)Product Life Expectancy >20 years



Warranty * 1 year

Lantern Options Sealite SL60, SL70, SLC310, SLC420 or SL125 series oflantern

Accessory Options Mould-in graphics Sealite IALA recommended top marks Rotationally moulded side-panelling Monitoring Systems (AIS, GSM cell-phone)


SeaMoorTM

Mooring Systems

NewV

“Our experiencefor your convenience”

IV Sealite can provide turn-key mooring solutions for the range of buoy products,enabling complete systems to be containerised and delivered to customersites around the world.


Complete range ofmooring chain &accessories to complimentSealite buoy products

IALA recommendedmooring solutionscalculated with Sealiteadvanced SeaMoorTMmooring calculator

Flexibility in manufactureto meet various installationrequirements & localconditions

One-stop for all marineAtoN equipment

As a service to valued customers, Sealite has developed an advanced mooringcalculator based on IALA guidelines and experience from major users.

Known as SeaMoorTM, this facility is available free of charge by contacting Sealite.

The system simulates site mooring based on the following easy steps;

Step 1. Select Buoy Model

Customers select which Sealite buoy they’re planning to use in their installation.

Step 2. Select Water Depth

Customers select the water depth of their proposed installation.

Step 3. Confirm Recommended Chain Size

The calculator will recommend a chain size at this point, which the customer canconfirm or choose a larger or smaller size. The calculator will perform simulations basedon this data.

Step 4. Set Maximum Wind Speed

Users enter the likely maximum wind speed. Wind speed will affect the buoyperformance in different ways, depending on the exposed wind area of the navaid.

Step 5. Set Maximum Current

Customers enter the maximum water speed, which will affect both the buoy and chain.

Step 6. Simulate Chain Length

The calculator will recommend a chain length at this point, based on the availableinformation entered. Customers can adhere to this information, or select their ownlength. The calculator will perform simulations based on this data.

Step 7. Simulate Sinker Mass

The calculator will recommend a sinker mass, based on the available informationentered. Customers can adhere to this information, or select their own mass. Thecalculator will perform simulations based on this data.

The calculator will then simulate navaid mooring using all of this available date, andproduce a parts list of required components.

Select buoy typeand installationparameters to viewmooring simulation

Sealite Mooring Calculator

SeaMoorTM

MooringSystems

By changingthe variousmooringparameters(eg. chainlength) userscan visualisethe affect onthe installation

Buoy Locationindicates anapproximate watchcircle given themooring chain lengthand total waterdepth

Shows a list ofrecommendedparts formoor ingSealite’s buoy

Buoy Depth indicateshow deep the buoywill float in the water(draft)

Users can check thatthe Proof Load listed inStep 3 is greater thanthe Minimum Proof Load.Heavier chain may berequired to ensure this

POSEIDON-17501750mm dia. Ocean Buoy

Optional top marksand lights available

316-gradestainless-steelgrab rail

___________ 316-gradestainless-steelbattery accessdoor andcompartment

Poseidon-1750 Wreck Marking Buoy Rotationallymoulded to 23mmwall thickness

The Sealite AdvantageMade from strong,durableUV-stabilisedvirgin polyethylene High visibility red, green,

white or yellow as per IALArecommendations


3 part product; flotationsection, mid section & topsection


Individual colourationof each section to suiteIALA colour/configurationrecommendations

The Sealite Poseidon-1750 Buoy is manufactured from UV-stabilised virginpolyethylene and has been specifically designed to withstand the harshmarine environment, and operate reliably with minimal maintenance.

Ports worldwide are realis ing the advantages of polyethylene buoys over tradit ionalsteel models.



No painting, ever


The colour pigment is added to the polyethylene during the moulding process, whichmeans that the buoy never requires paint ing.

The polyethylene material also inhibits marine growth, so the buoy requires cleaning lessoften than steel types.

Signi f icant advantages of the polyethy lene buoy al low the interval between serv ic ing tobe far greater, and users continually report major cost savings.

The Poseidon-1750 is constructed from 3 parts ensuring ease of deployment andservicing.

Safe water mark, Australia

Optional Day Marks

POSEIDON-17501750mm dia. Ocean Buoy

The section isinternally cross-braced ( ) usingstainless bracesjoining each mooringeye to the lifting eye.This ensuresmooringand lifting stressesare evenly sharedacross the structure.

SPECIFICATIONS •


/8 (standard), 3500 / 1373/4 (with spacer)

Total Reserve Buoyancy (kg/lbs) 600 / 1323Draft, Typical (mm/inches) 680 / 263

/4

Freeboard (mm/inches) 400 / 153/4 to 150 / 5 7/8


Physical CharacteristicsMaterial Rotationally moulded UV-stabilised virgin polyethylene, internal 316-grade stainless-steel bracing,

316-grade stainless-steel fittings, CSIRO slip resistance platform

Wall Thickness (mm/inches) 23 / 7/8

Ballast (kg/lbs) 170 / 375 internal concreteFilling Closed-cell polyurethane foam

Height (mm/inches) 2940 / 115 3/4





Warranty * 1 year


Accessory Options Mould-in graphics Sealite IALA recommended top marks Monitoring Systems (AIS, GSM cell-phone) Radar reflector



POSEIDON installation, India

Sealite Poseidon Buoy installation, fitted upwith an SLC310 light-head, Sint Maarten

NAUTILUS-22002200mm dia. Ocean Buoy

IALA top mark

Newd

Guard railSelf-containedlantern

Internal 10m2

radar reflector

Convenienttether points

AIS enabledNautilus-2200

316-grade SSladder & grab rail


Batterycompartment

Lifting points

Non-slip deck

The Sealite AdvantageInternal tie-bars tointerconnect lifting& mooring points


2.2mtr diameter

3.2mtr focal height (maybe increased to 4mtr)

Robust construction, 2-partmodular design

Internal redundantbuoyancy system

Lightweight

Large battery & payloadsection



100% recyclable

No painting, ever


Made from strong,durable UV-stabilised virginpolyethyleneInnovative

guidancekeel

Twin mooring points

The Nautilus-2200 is a robust, rotationally-moulded polyethylene ocean buoydesigned for offshore port and coastal applications.

The buoy is rotationally-moulded by Sealite from UV-stabilised virgin polyethylene, andhas a 2.2mtr float diameter and 3.2mtr lantern focal height. Lantern focal height may beincreased up to 4mtrs.

Built in a 2-part modular design, the buoy can be setup in any IALA recommendedassembly, and consists of a high-visibility float section with non-slip tread, and a towersection to support considerable payload.

The twin lifting and mooring eyes are interconnected by stainless steel tie bars throughthe hull structure – offering enormous strength and superior longevity of the navaid.

Five (5) buoys can be shipped in a 40ft container economically to almost anydestination.

The Sealite Nautilus-2200 is one of the largest buoys available to incorporate a 1-piecerotationally-moulded hull section, and represents exceptional value for port operatorsaround the world.

Sealite Nautilus buoys with SLC420 solarlanterns, Port Philip Bay, Australia

EnvironmentallyFriendly & CompletelyRecyclable

Sealite buoy products are made from

100% recyclable materials. As a service

to customers, individual components and

products at the end of their service life maybe returned to Sealite for recycling.

NAUTILUS-22002200mm dia. Ocean Buoy

SPECIFICATIONS•

General CharacteristicsAvailable Colours Red, Green, White, Yellow as per IALA RecommendationsFocal Plain Height (mm/inches) 3200 / 126Total Reserve Buoyancy (kg/lbs) 950 / 2094

Draft, Typical (mm/inches) 920 / 361/4



Physical CharacteristicsMaterial Rotationally moulded UV-stabilised virgin polyethylene, internal 316-grade stainless-steel bracing,

316-grade stainless-steel grab rail and ladder

Wall Thickness (mm/inches) 18 / 3/4

Ballast (kg/lbs) 350 / 772 internal concreteFilling Redundency chambersHeight (mm/inches) 4120 / 1621

/4


Mass (kg/lbs) 1000 / 2203

Product Life Expectancy >20 years



Warranty * 1 year


Accessory Options Mould-in graphics Sealite IALA recommended top marks Rotationally moulded side-panelling Monitoring Systems (AIS, GSM cell-phone)


The tower

and battery

compartment allows

for incorporation of

additional batteries

to drive ancillary

equipment to

increase the working

autonomy of the

navaid in lower

sunlight conditions.

Convenient

Forklift Access

Points to Safely

Maneuver the

Buoy Assembly

Ultrasonic

Testing Ensures

Consistency of

Wall Thickness in

Key Areas such

as Mooring Points

Buoy Configurationsfor IALA Regions A and B

REGION A REGION A& B

Port HandMark

East CardinalMark

West CardinalMark

South CardinalMark

North CardinalMark

StarboardHand Mark

PreferredChannel toStarboard

PreferredChannel to

Port

REGIONB

Port HandMark

SpecialMark

Safe WaterMark

Isolated DangerMark

StarboardHand Mark

PreferredChannel toStarboard

PreferredChannel to

Port

The Sealite buoy division provides turn-key production of navigation buoys fromtooling development, raw material selection and production, to final testingand inspection.

Keeping this entire process in-house allows Sealite to guarantee the superior quality of it’sproducts and ensures fast turnaround times.

Each buoy product is rotationally-moulded from UV stabilised virgin polyethylene, withindividual components of Sealite’s larger buoy products moulded in various colours to suita range of IALA recommended configurations.

Why Choose Polyethylene Buoys?

No Painting Inhibits Growth

Increased interval between servicing

Routine maintenance on location

Easily repaired in the unlikely event of damage Lightweight for ease of deployment and maintenance Environment friendly - no use of toxic antifouling paint

Accessories

MC/01

Post mounting plate to suit SL07 & SL1550mm ID

MC/02

Post mounting plate to suit standard base SL6050mm ID

MC/03

Post mounting plate to suit 200mm OD base pattern

lanterns including SL60-LB, SL70, SLC310, SLC420 & SL125

50mm ID

MC/04

Post mounting stand to suit SL10, SL50 & SL23 series

50mm OD post, 3-hole 200mm OD base pattern


Sealite manufactures alarge range of marine-grade accessories tocompliment navigationlantern and buoy products

All listed hardware isaluminium, 7-stagepowder-coated WHITE,unless otherwise stated.

MC/05

90 degree wall mounting stand50mm OD

Contact Sealitetoday for furtherinformation

MC/06

Adaptor plate to suit SLC400200mm OD mount

MC/07


MC/08


MC/09

Buoy mounting plate to affix SL15 lantern to SLB600,

SLB610 & SLB700 buoys

MC/10

Buoy mounting plate to affix standard base SL60 lantern

to SLB600, SLB610 & SLB700 buoys

Accessories

MC/11

Buoy mounting plate to affix SL70 lantern to SLB600,

SLB610 & SLB700 buoys

MC/12

Polyethylene multi-mount to suit SLC310 & SLC420Converts 4-hole to 3-hole base mounts

MC/13

Lantern spacer Converts 3/4 hole mounting patterns200mm OD

MC/14

316-grade SS bolt set to suit SL15 hardwareM5 x 20mm

MC/15

316-grade SS bolt set to suit standard base SL60 hard-ware

M4 x 20mm

MC/16

316-grade SS bolt set to suit SL70 & SL125 hardwareM8 x 25mm

MC/17

316-grade SS bolt set to suit SLC310 & SLC420 hardwareM8 x 30mm

MC/18

316-grade SS bolt set to suit SLC400, SLC500 & SLC600hardware

M8 x 20mm




MMAARRIINNEE LLAAMMPPSS




SSOOLLAARR PPAANNEELLSS

UniSolar Flexible Panels

Regulators

Plasmatronics

Morningstar

PECANEngineering

Mono & Polycrystalline

Phone: (03) 97

M

LLAATTEERRAALL

SSOOLLAARR // MM

T E C H N O L O G Y

72 9019 Fax: (03) 9773 8641 Mobile: 0428 278 707Email: [email protected]



arine Navigation Aids

AARRIINNEE AAPPPPLLIICCAATTIIOONNBBAATTTTEERRIIEESS

LLAATTEERRAALL

HIGH TECHNOLOGY P

It is non

It is imperviou

It will prote

Metal to m

Metal on any o

Synthetic grease c

Contains both

T E C H N O L O G Y

Marine Navigation Aids

ROTECTION FOR ELECTRICAL & ELECTRONICS

-toxic and non flammable.

s to both water and salt water.

ct against 25% acid fumes.

etal it is a great conductor.

ther material it is a high insulator.

ompound will not dry out or crack.

Teflon and Corrosion Inhibitors.

MARINEGUARD GREASE

MARINEGUARD GREASE is specificallyformulated to provide protection for surfacesexposed to aggressive saline and acidenvironments, including edge connectors, plugsand sockets. It is a synthetic grease incorporatedwith Vapour Phase Corrosion Inhibitors. It hashigh dielectric properties and will not affect theelectronic or electrical characteristics. Unlikeconventional grease it does not harden, containsno wax and remains free flowing. When appliedto surface it forms a moisture repellent filmwhich keeps the components dry. The vapourphase corrosion inhibitors provide additionalprotection to the metal against corrosion attack.The product has excellent thermal and oxidationstabilities. It does not contain silicone and willnot leave deposits of si1icone on surfaces.

Features

Enhances reliability of electrical andelectronic devices.

Extends working life by minimisingcorrosion

Protection of electrical contacts againstharsh environments.

Allows ready, inspection of coatedsurfaces,

Does not dry out, harden or crack.

Protection with Corrosion Inhibitors.

Non toxic, no c.f.'s Non flammable.

Does not affect electrical or electroniccharacteristics.

Applications

Protection of electronic edge connectors,plugs and sockets,

Terminal strips, Battery Terminals and allexposed electrical connectors as used inelectrical boxes such as switch boxes,junction boxes, control boxes etc.

SpecificationsAppearance: Opaque greaseSpecific gravity: 0.8725Dielectric strength: 12kvolts @ 2mm.Shelf life: Indefinite

Operating temperature:

-40 to 180c (Continuous)- 40 to 260c (Intermitent)

Application ProcedureClean the surface to be protectedApply liberally over the surface

Product packagingMGG10 10 gram syringeMGG50 50 gram syringe


Web: www.lateraltechnology.com.au Lateral Technology 2009

lateral technology 2009/10 marine catalogue here!...phone: (03) 9772 9019 fax: (03) 9773 8641...

Documents