learn. more. · • 8 plc and hmi level 2 december 2019 • 3 drives seminar level 1 • 5 basic...
TRANSCRIPT
HESCO 2019
Course Catalog
hesconet.com/events
PLC & HMI SEMINARS
BASIC & ADVANCED INDUSTRIAL ETHERNET
DRIVES SEMINARS
REMOTE ACCESS & NETWORK SECURITY
ROCKWELL AUTOMATION TRAININGS
Learn. More.
HESCO & Rockwell Training Calendar 2019 For more information or to enroll please visit our website at www.hesconet.com/events January 2019
• 8-11 CCP 143 Studio 5000 Logix Designer Level 3: Project Development • 16 PLC & HMI Level 1 • 17 PLC & HMI Level 2 • 21-25 CCV 207 FactoryTalk View SE Programming • 29-Feb. 1 CCPS43 SLC 500 and RSLogix 500 Maintenance and Troubleshooting
February 2019
• 4-8 CCP 299 Studio 5000 Logix Designer Level 1: ControlLogix Fundamentals and Troubleshooting • 13 Basic Industrial Ethernet • 14 Advanced Industrial Ethernet • 26-27 FND035 Electrical Safety for Qualified Personnel
March 2019
• 5-6 CCA101 AC/DC Motors and Drives Fundamentals • 13 PLC & HMI Level 1 • 14 PLC & HMI Level 2 • 19-20 CCP 154 RSLogix 5000 Level 4: Structured Text/Sequential Function Chart Programming • 21 Drives Seminar Level 1 • 26-29 CCP 153 Studio 5000 Logix Designer Level 2: ControlLogix Maintenance and Troubleshooting
April 2019
• 3 Basic Industrial Ethernet • 4 Advanced Industrial Ethernet • 15-19 CCP 299 Studio 5000 Logix Designer Level 1: ControlLogix Fundamentals and Troubleshooting • 30 Drives Seminar Level 1
May 2019
• 2 Remote Access and Network Security • 7-8 CCA 182 PowerFlex 750 Series Configuration and Startup • 9-10 CCA 183 PowerFlex 750 Series Maintenance and Troubleshooting • 15 PLC & HMI Level 1 • 16 PLC & HMI Level 2 • 22-23 CCN 130 Motion Control Fundamentals
June 2019
• 3-7 IMINS Managing Industrial Networks with Cisco Networking Technologies • 12 Basic Industrial Ethernet • 13 Advanced Industrial Ethernet • 27 Drives Seminar Level 1
July 2019
• 8-12 CCP 299 Studio 5000 Logix Designer Level 1: ControlLogix Fundamentals and Troubleshooting • 17 PLC & HMI Level 1 • 18 PLC & HMI Level 2 • 23-24 CCP 152 Studio 5000 Logix Designer Level 4: Function Block Programming • 30 Remote Access and Network Security
August 2019
• 5-9 IMINS2 Managing Industrial Networks for Manufacturing with Cisco Technologies • 14 Drives Seminar Level 1 • 20 Basic Industrial Ethernet • 21 Advanced Industrial Ethernet • 26-30 MFG 213 Industrial Electrical Controls Fundamentals
September 2019
• 9-13 CCP 299 Studio 5000 Logix Designer Level 1: ControlLogix Fundamentals and Troubleshooting • 18 PLC and HMI Level 1 • 19 PLC and HMI Level 2 • 24-25 CCP 154 RSLogix 5000 Logix Designer Level 4: Structured Text/Sequential Function Chart
Programming • 27 Remote Access and Network Security
October 2019
• 9 Basic Industrial Ethernet • 10 Advanced Industrial Ethernet • 24 Drives Seminar Level 1
November 2019
• 5 Remote Access and Network Security • 7 PLC and HMI Level 1 • 8 PLC and HMI Level 2
December 2019
• 3 Drives Seminar Level 1 • 5 Basic Industrial Ethernet • 6 Advanced Industrial Ethernet
NOTE: HESCO course registration is open until the day before the start date, but Rockwell Automation trainings require 21 calendar days registration notice. HESCO and Rockwell reserve the right to alter course schedules, content, limit class size, reschedule, discontinue or cancel courses. Pricing is subject to change without notice.
Advanced Industrial Ethernet Feb. 14 April 4 June 13 Aug. 21 Oct. 10 Dec. 6
Participants who attend our one-day Advanced Industrial Ethernet course will walk away with the foundation to deploy a complex and distributed Ethernet network in their facility. This course is taught by instructors who have a background in the industrial world which allows them to offer perspectives unique to challenges that controls engineers and technicians face on a day-to-day basis. This is a full-day course with lunch provided. Note: Get a $100 discount when you register for both the Basic and Advanced trainings. Topics include: • Spanning Tree Protocol – Basics of the IEEE 802.1D standard as well as differences between Cisco Per-VLAN Spanning Tree (PVST) and Multiple Spanning Tree (MST). • Inter-VLAN Routing – Use cases for applying inter-VLAN routing. • Dynamic Host Control Protocol (DHCP) – How to effectively use DHCP on the plant floor. • Multicast – Why do we use multicast and what are its advantages/disadvantages. • Redundancy protocols – Resilient Ethernet Protocol, EtherChannel, and Flex Links. • Network Address Translation (NAT) – Overview of the versions of NAT and their implementation. • Security – Access Control Lists (ACLs), port security, and concept of least privilege.
"I’m impressed by how you guys at HESCO seem to out-do yourselves each time I go there for a training seminar. It’s always a great time and I always walk away with some new knowledge.
#LearnMore and/or register at hesconet.com/events or email [email protected]
Basic Industrial Ethernet Feb. 13 April 3 June 12 Aug. 20 Oct. 9 Dec. 5
Participants who attend our one-day Basic Industrial Ethernet course will walk away with the confidence and knowledge to design a simple Ethernet network and implement it in their facility. Our courses are taught by instructors who have a background in the industrial world which allows them to offer perspectives unique to challenges that controls engineers and technicians face on a day-to-day basis. This is a full day course with lunch provided. Note: Get a $100 discount when you register for both the Basic and Advanced trainings. Topics include: • Physical cabling – Students will learn the basics of copper and fiber cabling, TIA standards, and structured cabling implementation. • Open Systems Interconnect (OSI) Model – How it applies to networking and guides manufacturers of networking technology. • Switch theory – How switches function and what role they serve in a network topology. • VLANS – Configuration and implementation. • IP Addressing – What is an IP address and how it is derived. • Subnetting – What is subnetting and considerations around subnetting. • Industrial Protocols – Basics of industrial protocols and their history.
“This course cleared up a lot of mysteries about networking.”
#LearnMore and/or register at hesconet.com/events or email [email protected]
Drives Seminar Level 1 March 21 April 30 June 27 Aug. 14 Oct. 24 Dec. 3
Join the HESCO team for our Drives Seminar Level 1 training, an introduction to the PowerFlex 525. You will be introduced to basic wiring, standalone programing, and configuration with the assistance of a connected computer. You’ll also walk away with a basic understanding of drive configuration and a personal desktop drive kit. This is a full day course with lunch provided. Drives Seminar Level 1 topics include: Topics include: • Introduction to Rockwell Automation/ Allen-Bradley PowerFlex 520 Series Drives. • Overview of wiring and I/O. • Programming options. • Basic drive set-up.
• Setting IP address for network use. • Overview of Connected Components Workbench (CCW). • Programming basics with CCW. • Introduction to advanced features.
“I thought the content was very applicable to what I wanted to know, and I found the encoder feedback was a surprising option that was very useful to see a demonstration. This is something I can directly apply at work.” “It was exactly what I expected and quickly and clearly described what the Allen-Bradley PowerFlex family of drives is capable of doing and how to configure them.”
#LearnMore and/or register at hesconet.com/events or email [email protected]
PLC & HMI Seminar Level 1 Jan. 16 March 13 May 15 July 17 Sept. 18 Nov. 7
The PLC and HMI Level 1 seminar includes a complete demo module in a fully functional configuration mounted on a convenient plexiglass stand. The entire demo module has over $1,500 worth of equipment, yours to keep and included at no extra charge as part of the cost of attendance. In the course, you’ll receive hands-on training on how to set up and program an Allen-Bradley Micro 800 PLC and PanelView HMI. This is a full day course with lunch provided. PLC topics include: • Intro to Micro 800 PLC product line. • Specific advantages of Micro 820 model PLC. • How to launch CCW v10. • How to create a new project with a M820. • How to create a program (Ladder Logic). • Entering of a program for a push button & light. • Entering of a program for timing. • Download to controller. • View program online with controller.
HMI topics include: • Intro to PanelView 800 product line. • Adding 4" PanelView to existing program. • How to do basic configuration. • Adding HMI tags & link to controller PLC tags. • How to add screen and build graphics. • Program a real world "soft" push button to control options. • Program display of timer. • Download to HMI.
“Gaining a foundation of knowledge in this subject is key to build off of for more complicated topics.”
#LearnMore and/or register at hesconet.com/events or email [email protected]
PLC & HMI Seminar Level 2 Jan. 17 March 14 May 16 July 18 Sept. 19 Nov. 8 In our PLC and HMI Level 2 seminar, you’ll receive hands-on training on some advance topics for the Allen-Bradley Micro 800 PLC and PanelView 800 HMI. This is a half-day course with lunch provided. Note: the Level 2 seminar doesn’t include hardware; participants who have taken Level 1 course should bring back that hardware for this course. If you don’t have the Level 1 hardware, you can purchase a kit for $695.
PLC topics include: • Connected Components Workbench: developer edition vs standard edition. • Structured text programming. • FBD and UDF/UDFB programming. • HMI recipes. • Advance features of the PanelView 800 product. • Connected Components Accelerator Toolkit. • Integration of motion and drives into Connected Components Workbench. “Course material did more of a deep dive into more technical aspects of the equipment that will be of use in my applications.” “Your people do a tremendous job presenting the material and answering questions.”
#LearnMore and/or register at hesconet.com/events or email [email protected]
Remote Access & Network Security May 2 July 30 Sept. 27 Nov. 5
Join the HESCO team for Remote Access and Network Security, an introduction to implementing a firewall on the plant floor. You will be introduced to the basics of network security and why maintaining your own firewall is essential to the integrity and safety of your network. You will walk away with a basic understanding of how to implement a network security policy at your facility and your very own firewall. This is a full day course with lunch provided. Topics include: • Basic network security concepts. • Network attack vectors and threats. • A history of stateful firewalls. • Implementing an effective Defense-in-Depth strategy. • Ubiquiti Security Gateway (USG) overview. • Configuring advanced firewall features and Deep Packet Inspection (USG). • Configuring secure remote access (USG). • Basic network forensics and threat identification.
“Instructors were very knowledgeable. It was very useful to learn about industrial networking security.”
#LearnMore and/or register at hesconet.com/events or email [email protected]
Rockwell Automation trainings are held in the HESCO Training Center, 30 Inwood Road, Suite One, in Rocky Hill, CT. Learn more and register at hesconet.com/events NOTE: Rockwell Automation trainings require 21 calendar days registration notice. January 2019
• 8-11 CCP 143 Studio 5000 Logix Designer Level 3: Project Development • 21-25 CCV 207 FactoryTalk View SE Programming • 29-Feb. 1 CCPS43 SLC 500 and RSLogix 500 Maintenance and Troubleshooting
February 2019
• 4-8 CCP 299 Studio 5000 Logix Designer Level 1: ControlLogix Fundamentals and Troubleshooting • 26-27 FND035 Electrical Safety for Qualified Personnel
March 2019
• 5-6 CCA101 AC/DC Motors and Drives Fundamentals • 19-20 CCP 154 RSLogix 5000 Level 4: Structured Text/Sequential Function Chart Programming • 26-29 CCP 153 Studio 5000 Logix Designer Level 2: ControlLogix Maintenance and Troubleshooting
April 2019
• 15-19 CCP 299 Studio 5000 Logix Designer Level 1: ControlLogix Fundamentals and Troubleshooting May 2019
• 7-8 CCA 182 PowerFlex 750 Series Configuration and Startup • 9-10 CCA 183 PowerFlex 750 Series Maintenance and Troubleshooting • 22-23 CCN 130 Motion Control Fundamentals
June 2019
• 3-7 IMINS Managing Industrial Networks with Cisco Networking Technologies
July 2019 • 8-12 CCP 299 Studio 5000 Logix Designer Level 1: ControlLogix Fundamentals and Troubleshooting • 23-24 CCP 152 Studio 5000 Logix Designer Level 4: Function Block Programming
August 2019
• 5-9 IMINS2 Managing Industrial Networks for Manufacturing with Cisco Technologies • 26-30 MFG 213 Industrial Electrical Controls Fundamentals
September 2019
• 9-13 CCP 299 Studio 5000 Logix Designer Level 1: ControlLogix Fundamentals and Troubleshooting • 24-25 CCP 154 RSLogix 5000 Logix Designer Lvl 4: Structured Text/Sequential Function Chart Programming
More information and registration at hesconet.com/events