led (2x2 or 2x4) l2d series...nulite lighting 10770 east 51st avenue, denver, co 80239 phone...

Nulite Lighting 10770 East 51st Avenue, Denver, CO 80239 Phone 303-287-9646 Fax 303-287-0316 www.nulite-lighting.com

Description:

TM

Project Name:Type:Catalog #:

Date:

Construction: Die formed cold rolled steel housing. Housing finish is white baked enamel. Optional die formed 20 gauge cold rolled steel housing and powder coated white paint after fabrication. Access plate allows for easy wiring without opening luminaire. Reflector / Driver: Reflector / driver cover is finished with high reflectance white paint. Constant current electronic driver with 0-10V dimming inputs. Universal (UNV) voltage is from 120-277V, 50/60 Hz.

Shielding: Extruded 3-piece smooth frosted acrylic diffusers. Spring tension shift-and-remove center diffuser for convenient maintenance. Optional smooth clear center with round perf overlay.

LED Module: Distributed LED array in a variety of lumen output packages. LED color is available in (L30) 3000K, (L35) 3500K or (L40) 4000K. Module is replaceable. L90 ≥ 100,000 hours.

Mounting: Acoustical grid, Non-IC rated.

Labels: ETL listed, conforms to UL Standard 1598 and 8750.Dry location listed, optional Damp location is available.

Warranty: 5-year LED luminaire limited warranty.

The Nulite Sottile [so-tee-lay] 2D LED Series is a new fully lumi-nous architectural recessed luminaire. This cost effective, energy efficient LED luminaire provides soft ambient illumination.

Specifications:

Ordering InformationSample: L2D-4-40L35-UNV-DIM-ENL

Series Lumen Package3 / LED Color Voltage Options

UNV120277

DriverLength2

24

2015 Rev. C7Specifications and dimensions are subject to change without notification. Specification sheets on our website supersede all other versions. Nulite reserves the right to bulk package any order.

Notes:1. Some products are DesignLights™ Consortium Qualified, refer to www.designlights.org Qualified Products List.2. Nominal for 2’ and 4’ grid ceiling.3. Output based on standard optics. See page 2. Optional lenses will vary output. 4. 0-10V dimming input, consult factory.5. Consult factory for maximum lumen package.

4-3/8” [111mm]

23-3/4” [603mm](24” [610mm] O.C. Grid Tees)

L2D1

(Nom. 2’ width)

(2x2)

(2x4)

(2’ Nom. Length) 2020HP 3030HP3340(4’ Nom. Length) 3030HP4040HP506070

47-3/4”[1213mm]

23-3/4”[603mm]

L2D SeriesSottile 2D LED (2x2 or 2x4)

DIM4Dimming

EM Emergency Battery Pack

FLEX3 6’ of Flex, 3-wire (“Class 2” low voltage control wires not sleeved in flex)

20PAF 20 ga. CRS / Paint After Fabrication

RPO Round Perforated Overlay Center Diffuser

DL Damp Location

FLG Flange Kit

SIC Seismic Clips

CP5 Chicago Plenum

DSR Daylight Sensor - Remote

edTechnology

L30L35L40 ENL Enlighted Enabled

90/50 90(+) CRI / High R9

90 90(+) CRI

sb02

9050 Series

L2D-2-30L40-UNV-DIM-90/50

2 30L40 UNV DIM 90/50CRI EM (Egress Lighting)

Grid Ceiling Mounting Details

1” Tee Grid

9/16” Tee Grid

Screw Slot Grid

L2D LED Series


TM

Specifications and dimensions are subject to change without notification.

RPO

Center Diffuser Option

Lumen Packages for (Standard Center Frosted Diffuser)

2x2Lumen Package Input Watts Output Lumens Lumens/Watt @ 3500K20 (2000) 20.7 1930 93.220HP* (2000) 20.7 2309 111.630 (3000) 29.9 2682 89.730HP* (3000) 29.9 2990 100.033 (3300) 35.1 3306 94.140* (4000) 40.7 3826 94.02x4Lumen Package Input Watts Output Lumens Lumens/Watt @ 3500K30 (3000) 30.0 3152 105.130HP* (3000) 30.0 3670 122.340 (4000) 41.1 4068 99.040HP* (4000) 41.1 4807 117.050 (5000) 51.4 4888 95.160* (6000) 60.0 6312 105.270* (7000) 71.0 7050 99.3

L2D-2-20L40-UNV-DIM.IES

250

500

750

L2D-2-20L35...1930 lumensITL82438

Photometric Curves

* Based on 2 board cross-section.Multiply Output by 95.3% for 3000K and 102.6% for 4000K values.

L2D-4-40L35.IES

361

722

1083

1444

L2D-4-40L35...4068 lumensITL82442

Series CRI R9 Value 3000K 3500K 4000KStandard 85 (+4/-5) 15 (+/-5) 141 145 150

90 95 (+4/-5) 40 (+/-10) 107 110 11490/50 95 (+4/-5) 70 (+/-20) 107 110 114

Diode LPW (+/-10)Optional 90 or 90/50 Data

________________________________________________________________________________ ___ _ _ ___OUTPUT RANGE: VIVID SERIES 390-455 lumen; CRI-95, R9>90________________________________________________________________________________ ___ _ _ ___OUTPUT RANGE: BRILLIANT SERIES 475-525 lumen; CRI-80________________________________________________________________________________ ___ _ _ ___BEAM ANGLE RANGE 10°, 25°, 36°________________________________________________________________________________ ___ _ _ ___COLOR TEMPERATURE RANGE 2700K, 3000K, 4000K, 5000K________________________________________________________________________________ ___ _ _ ___APPLICATION Halogen replacement for indoor & outdoor applications________________________________________________________________________________ ___ _ _ ___

SORAA LED MR167.5W

Form Factor Operating Temperature Electrical

Width: 50.1mm (1.97”) Minimum: -40°C (ambient) Wattage: 7.5W Dimmable to < 20%

Height: 45.5mm (1.79”) Typical: 85°C - 95°C (base) Power factor: 0.92 Frequency: 50/60Hz

Weight: 47g Maximum: 100°C (base) Voltage: 12V +/- 1.2V

UNIVERSALPOINT SOURCE OPTICS Exceptional beam control enables unique 10° narrow spot and smooth uniform beams

Single light source, single crisp shadow VP3 VIVID COLOR AND VP3 NATURAL WHITE VIVID series provides accurate color rendering across the visible spectrum from 400nm to 700nm, CRI-95, R9>90

Accurate white rendering based on >70% excitation of Optical Brightening Agents with emission between 400nm & 440 nm

ENERGY EFFICIENCY AND LONG LIFE 85% more energy efficient than standard halogen lamps

Typical payback of one year or less

Rated lifetime of 35,000 hours. Three year warranty

CERTIFICATIONS UL/CUL Class 2 and non-Class 2, FCC Title 47 Part 15B, RoHS, CE

GU-5.3

UNIVERSAL

100V

12VAC

230V

120V

®

IR

UV

HIGHLY COMPATIBLE Narrow spot compatible with Soraa SNAP System accessories

Geometrically compatible with standard fixtures and suitable for damp locations

This lamp is suitable for use in fully enclosed fixtures, subject to the maximum heatsink temperature limits stated in this data sheet. A list of qualified enclosed fixtures can be found at www.soraa.com/resources

Works with trailing edge and leading edge phase cut dimmers, 12V AC magnetic and electronic transformers and 12V DC transformers (see www.soraa.com/resources)

INTENDED USE AND APPLICATIONS Intended for use in MR16 compatible recessed downlights, track lighting and other indoor and outdoor applications

Soraa lamps are designed to safely turn down in any thermal environment not conducive to minimum airflow or proper ventilation

DIM

Base Temperature Measured Here

50.1mm(1.97”)

45.5mm(1.79”)

COLOR RENDERING DIMENSIONS

Soraa VIVID

80 CRI LED

Visible SpectrumHarmfulUV

WastefulIR

400 500 600 700

Halogen

Nanometers

Soraa BRILLIANT

Soraa Inc. 6500 Kaiser Drive, Suite 110, Fremont, CA 94555855 GO-SORAA / 855 467-6722 www.soraa.com

GENERAL SPECIFICATIONS

LED TO BE USED WITH AXISLIGHTING DOWNLIGHT INSERT@ LUMINARE END

Model NumberProduct Code

CCT(K)

BeamAngle (°)

CBCP (Cd)

Halogen Equivalent**(Watts)

Total Flux (Lm)

Efficacy (Lm/W)

CRI/R9

White Point (McA)

SORAA VIVID SERIES:

SM16-07-10D-927-03SNAP 00919 2700 10 5710 50 390 52 95/95 3 Yes

SM16-07-25D-927-03 00931 2700 25 2260 50 410 55 95/95 3

SM16-07-36D-927-03 00943 2700 36 1070 50 410 55 95/95 3

SM16-07-10D-930-03SNAP 00923 3000 10 6000 50 410 55 95/95 3

SM16-07-25D-930-03 00935 3000 25 2400 50 435 58 95/95 3 Yes

SM16-07-36D-930-03 00947 3000 36 1130 50 435 58 95/95 3 Yes

SM16-07-10D-940-03SNAP 00925 4000 10 6290 50 430 57 95/95 4

SM16-07-25D-940-03 00937 4000 25 2510 50 455 61 95/95 4 Yes

SM16-07-36D-940-03 00949 4000 36 1190 50 455 61 95/95 4 Yes

SM16-07-10D-950-03SNAP 00927 5000 10 6290 50 430 57 95/90 5

SM16-07-25D-950-03 00939 5000 25 2510 50 455 61 95/90 5

SM16-07-36D-950-03 00951 5000 36 1190 50 455 61 95/90 5

SORAA BRILLIANT SERIES

SM16-07-10D-827-03SNAP 00917 2700 10 6950 50 475 63 80/>0 3 Yes

SM16-07-25D-827-03 00929 2700 25 2760 50 500 67 80/>0 3 Yes

SM16-07-36D-827-03 00941 2700 36 1310 50 500 67 80/>0 3

SM16-07-10D-830-03SNAP 00921 3000 10 7320 50 500 67 80/>0 3

SM16-07-25D-830-03 00933 3000 25 2900 50 525 70 80/>0 3 Yes

SM16-07-36D-830-03 00945 3000 36 1370 50 525 70 80/>0 3

SORAA LED MR16 7.5W

SPECIFICATIONS BY MODEL NUMBER*

BEAM DIAGRAM

Information and specifications subject to change. SM16 7W Rev 1 12.01.15

Soraa Inc. 6500 Kaiser Drive, Suite 110, Fremont, CA 94555855 GO-SORAA / 855 467-6722 www.soraa.com

SAFETY NOTE ON HEAT ____________________________________________________________

Although Soraa’s lamps operate at cooler temperatures than halogen lamps, it is recommended that gloves be worn when handling bare lamps that have been energized.

*Specifications are at stable warm operating conditions (25°C ambient) **Energy Star Minimum SNAPSORAA SNAP System Compatible

Beam Dia at 50% CBCP (ft)

Field Dia at 10% CBCP (ft)

Foot-candles (% of CBCP)

0.5 1.1 11.1%

1.0 2.1 2.8%

1.6 3.2 1.2%

2.1 4.2 0.7%

2.6 5.3 0.4%




1.9 3.3 11.1%

3.9 6.5 2.8%

5.8 9.8 1.2%

7.8 13.0 0.7%

9.7 16.3 0.4%




1.3 2.2 11.1%

2.7 4.4 2.8%

4.0 6.6 1.2%

5.3 8.7 0.7%

6.7 10.9 0.4%

Flood 36°Narrow Spot 10° Narrow Flood 25°

CCT = Correlated Color Temperature CRI = Color Rendering Index (Ra-8) White Point = White Point Accuracy in McA step

Distanceto Floor(Feet)

3’ 3’

6’

9’

12’

6’

9’

12’

15’ 15’

Note: Footcandles may be calculated by multiplying the CBCP of the desired model number by the percentage in the tables above


Description:

TM

Construction: The housing consists of visible extruded aluminum mud ring trim rails with formed cold rolled steel back channel and heavy gauge end caps. Steel alignment tabs and white snap-in joiner clips are used for continuous row applications. Luminaire is finished textured white.

Reflector / Driver: Reflector / driver cover is finished with high reflectance white paint. Optional asymmetric semi-specular aluminum reflector. Standard constant current electronic driver with 0-10V dimming input; dimming range from 100% down to 10%. Universal (UNV) voltage is from 120 - 277V, 50/60 Hz.

Shielding: Extruded frosted acrylic or satin white acrylic snap-in lens with DR, flush or regressed.


Mounting: Inaccessible ceiling types, mud ring for a trimless appearance. Non-IC rated. Individual mount or continuous runs.

Labels: ETL listed, conforms to UL Standard 1598 and 8750, Damp location.

Warranty: 5-year limited warranty on LED and Driver.

The Regolo RM4 LED series is a recessed, nominal 4” wide pro-file, slot unit designed to be mud in for a trimless appearance. The product is ideal for illuminating corridors, open and private offices, classrooms, lobbies and general purpose rooms.

Specifications:

Ordering InformationSample: RM4-10L35-UNV-L12-1C-STR-WH-4’

2016 Rev. D1Specifications and dimensions are subject to change without notification. Specification sheets on our website supersede all other versions. Nulite reserves the right to bulk package any order.

Regolo 4 LED Mud Ring Series

edTechnology

Flush Lens

Regressed Lens

Adjustable Yoke Bracket

1/2” regressed lens

3” [76mm]

3-9/16” [90mm]

5-5/16” [135mm]Hole-to-hole

6-5/16” [160mm]Flange-to-flange

Structure & fasteners, by others.

Drywall compound / plaster & fasteners, by others.

Drop Lens Option

Series Voltage

RM41

UNV

120

277

Driver Shielding/PositionCircuit

1C Single Circuit

1E Single Circuit w/ EM Circuit

1B Single Circuit w/ Battery Pack

FR(Frosted)

ST(Satin white)

F(Flush lens)

R5

(Regressed lens)

D(Opaque Metal End Drop lens)

L(Luminous Acrylic End Drop lens)

Options

RM4 (Mud Ring - Nom. 4”)

Lumen Package2 / Color

L30

L35

L40

LengthColor

WH(White - Mud Ring Standard)

2’3’4’5’6’7’8’Continuous Runs6

XX’ Specify run length in 1 foot increments. Consult factory for custom lengths.

Notes:1. Some products are DesignLights Consortium™ Qualified, refer to www.designlights.org Qualified Products List under family models for details.2. Nominal lumen output per foot for frosted lens and 3500K.3. Standard driver, don’t connect low-voltage wires for non-dimming applications. Consult factory for specifications and manufacturer.4. Consult factory for specifications and manufacturer.5. We recommend our Satin White lens for the Regressed position.6. 6” increments are common custom lengths. We can provide custom run length down to the nearest (+/- 1/8”).7. Not available with Drop Lens.8. Only available with Frosted Flush lens.

5-1/

2” [1

40m

m] M

ax.

1-1/

4” [3

2mm

] M

ax.

4-5/

8” [1

17m

m] M

in.

3/8”

[10m

m] M

in.

Project: Qty:

Catalog #:Date:

Type:

5/8” [16mm]

WHCP Chicago Plenum

OS7 End of run Occupancy Sensor

DS7 End of run Daylight Sensor

FLEX 6’ of Flex

ASYM8 Asymmetric Reflector (See Page 2)

GLR Fusing

See Accessories for Corners and Downlight Modules

03 (~390 lm/ft, 3.28W/ft)

05 (~568 lm/ft, 4.85W/ft)

06 (~724 lm/ft, 6.38W/ft)

09 (~898 lm/ft, 7.79W/ft)

10 (~1036 lm/ft, 9.39W/ft)Consult Factory for Custom Lumen Package

D3(Dim to 10%)

Dimming (0-10V)

D14(Dim to 1%)

D04(Dim to 0%)

Lutron DimmingSee Page 2 for Ordering Codes

eldoLED ECOdriveELE (Dim to 1%)

DALI Dimming

ELS (Dim to 0%) eldoLED SOLOdrive

RM4 LED Series


TM


Page 2

24”26-1/2”

36”38-1/2”

48”50-1/2”

72”74-1/2”

96”98-1/2”

RM2

RM4

RM6

24”26-1/2”

36”38-1/2”

48”50-1/2”

72”74-1/2”

96”98-1/2”

24”26-1/2”

36”38-1/2”

48”50-1/2”

72”74-1/2”

84”86-1/2”

60”62-1/2”

84”86-1/2”

60”62-1/2”

84”86-1/2”

60”62-1/2”

96”98-1/2”

Individual Lengths

“D” Opaque Metal End Drop Lens

“L” Luminous Acrylic End Drop Lens

1/2” Drop Len Options

Flange Mount Shown Flange Mount Shown

Continuous Run Lengths

Run Length

2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’ 10’

11’

12’

13’

14’

15’

16’

17’

18’

19’

20’

21’

22’

23’

24’

25’

26’

27’

28’

29’

30’

31’

32’

33’

34’

35’

36’

37’

38’

39’

40’

41’

42’

43’

44’

2’ 1

3’ 1

4’ 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

5’ 1 1 1 1 1 1 1 1 1 1

6’ 1 1 1 1 1 1 1 1 1 1

7’ 1 1 1 1 1 1 1 1 1 1

8’ 1 1 1 1 1 2 1 1 1 2 2 2 2 3 2 2 2 3 3 3 3 4 3 3 3 4 4 4 4 5 4 4 4 5

Num

ber o

f Hou

sing

s

Run length doesn’t include overlapping flange.

ASYM Option

Lens Options

Satin White LensThis diffuser is designed for visible lens uniformity. It’s recommended for regressed lens configuration in our shallow housing. (Transmission ~ 69%)

Frosted LensThis diffuser is designed for a balance between efficiency and lens uniformity.(Transmission ~ 89%)

Frosted

SatinWhite

Shielding

Nulite Code

Lutron Prefix

Lutron Series

Dim Level

3-Wire Eco- Systemtm

L11 L3DAE Hi-lumetm 1% Yes

L12 L3DA3W Hi-lumetm 1% Yes

L15 LDE1* Hi-lumetm - H Series 1% Yes

L16 LDE5 5-Series 5% Yes

Lutron Driver Ordering Codes

* Soft-on, Fade-to-Blacktm

Control Type

Sensor Option

Occupancy and/or Daylight Sensor(Surface Mount Shown)

RM4 LED Series


TM


Page 3

2016 Rev. D1

Continuous Row Joiner Detail

RM6 shown in diagram

(2) Steel alignment tabs

(2) Joiner clips

Structure and ceiling by others

Adjustable Yoke Bracket

Plug-in wire connector(s)

Photometric Curves

RP4D-05L35DO-1C48C_A-FF-W

264

528

793

1057

Cat. # RM4-05L35-...-FRF-...-4’Frosted Flush LensWattage/ft - 4.85Lumens/Watt - 117

RP4D-09L35DO-1C48C_A-FF

418

835

1253

1670

Cat. # RM4-09L35-...-FRF-...-4’Frosted Flush LensWattage/ft - 7.79Lumens/Watt - 115

RW4D-05L40DU-1C48C_A-FF

310

620

929

1239

Cat. # RM4-05L40-...-FRF-...-4’-ASYMFrosted Flush LensWattage - 5.25Lumens/Watt - 110

archi tectural Regolo SeriesA Linear Lighting System

Project: GCICPhotographer: LaCasse PhotographyArchitect: OZ ArchitectureProduct: Regolo 2” LED Pendants

For a grid(T-bar) fixture:RG4-07L40-UNV-D-1C-FRF-4’-9050 (4 FOOT)RG4-07L40-UNV-D-1C-FRF-8’-9050 (8 FOOT)

For a pendant fixture:RP4D-07L40-UNV-D-1C-FRF-W-T1-48-4’-9050 (4 FOOT)RP4D-07L40-UNV-D-1C-FRF-W-T1-48-8’-9050 (8 FOOT)

The Regolo series is our new linear lighting system, offered in LED or fl uorescent in three widths. This product can be mounted individually or in continuous rows in grid or fl anged ceiling types. Our snap-in lens system provides a crisp aesthetic and modern appearance. Two lenses are available in fl ush or regressed confi gurations.

Nulite’s LED circuit boards are manufactured in the USA to our specifi cations. Each high quality chip is binned to ANSI standards for color consistency and for-ward voltage to 100mV for bright-ness consistency. Available in three color temperatures: 3000K, 3500K or 4000K. L70 ≥ 50,000 hours. LED boards are fastened to heat sinking white refl ectors which the assem-blies can be removed for service or replacement.

Our standard electronic driver is a constant current design with 0-10V dimming inputs. Dimming range is from 100% to 10%.

Nulite has a 5-year limited warranty on LED boards and drivers. Con-sult factory for more information.

Nulite LEDLED Technology

ededTechnology

Regolo 6

Regolo 4

Regolo 2

2” [51mm]Aperture

3” [76mm]Aperture

5” [127mm]Aperture

Th

ree

Wid

ths

Th

ree

Wid

ths

1. Visible extruded aluminum grid trim rails fi nished texture white. Precision details for snap-in lens or louver options.

2. Formed cold rolled steel back channel and end caps fi nished in architectural pre-paint texture white.

3. Pry-out grid hooks with extension for universal grid mounting. (Support wire tied back to structure by others.)

4. LED board is fastened to a removable white refl ector which can be replaced or updated; Fluorescent use rotary lamp holders for positive lamp retention. Refl ector is fi nished with a high refl ectance white paint.

5. Time saver, plug-in wire connector(s) for continuous row mounting.

6. LED - standard electronic, constant current, dimming driver with 0-10V inputs; T8 - standard electronic instant start ballast; T5/T5HO - standard electronic programmed start ballast.

7. Channel for continuous row slide-in stainless steel alignment tabs. (Alignment tabs not shown.)

8. Snap-in joiner clips for continuous row applications. (Joiner clip not shown.)

9. Snap-in extruded frosted or satin white acrylic lens, fl ush or regressed. Snap-in semi-specular or white cross blade baffl e available for fl uorescent lamping.

Grid Features:

1

5 6

3

9

Gri

d M

ou

nt

ededTechnology

8

7

2

4

Grid

Mo

un

t

Flush Lens Regressed Lens White Blade Semi-spec Blade

The Regolo grid mount luminaire is designed to work in all standard ceiling gridsystems. Grid units come with pry-out grid hooks to support the unit on the grid. Hooks have a hole for the installer to attach wire and tie back to structure.

The grid style is available in LED and linear fl uorescent as individual or continuous row mounting.

1” Tee Screw Slot3” [76mm]

2” [51mm]

5-1/

2” [1

40m

m]

Grid on-center4” [102mm]

3” [76mm]

Grid on-center6” [152mm]

5” [127mm]

Grid on-center

RG2 RG4 RG6The RG4 can be installed in the popular lay-in ceiling systems which has a 4” on-center zone.

The RG6 can be installed in the popular lay-in ceiling systems which has a 6” on-center zone.

RG Series

Fluorescent Staggered Lamp OptionOur staggered fl uorescent lamp option mini-mizes socket shadows in continuous run ap-plications. Our staggered runs are available in 6” increments, with lamp overlap of 6” for T8 and 4” for T5/T5HO. We recommend our satin white lens for lens brightness uniformity.

Satin White LensThis diffuser is designed for visible lens brightness uniformity. It’s recommended for staggered lamp confi gurations.(Transmission ~ 69%)

Frosted LensThis diffuser is designed for a balance between effi ciency and lens uniformity.(Transmission ~ 89%)

1” Tee Screw Slot

1” Tee Screw Slot

Frosted

SatinWhite

1. Visible extruded aluminum fl anged trim rails fi nished texture white standard. Precision details for snap-in lens or louver options. Other fi nishes available.

2. Formed cold rolled steel back channel fi nished and end caps in architectural pre-paint texture white.

3. Heavy duty adjustable support yoke brackets.

4. LED board is fastened to a removable white refl ector which can be replaced or updated; Fluorescent use rotary lamp holders for positive lamp retention. Refl ector is fi nished with a high refl ectance white paint.

5. Time saver, plug-in wire connector(s) for continuous row mounting.

6. LED - standard electronic, constant current, dimming driver with 0-10V inputs; T8 - standard electronic instant start ballast; T5/T5HO - standard electronic programmed start ballast.

7. Channel for continuous row slide-in stainless steel alignment tabs. (Alignment tabs not shown.)

8. Snap-in joiner clips for continuous row applications. (Joiner clips not shown.)

9. Snap-in extruded frosted or satin white acrylic lens, fl ush or regressed. Snap-in semi-specular or white cross blade baffl e available for fl uorescent lamping.

Flange Features:

1

3

4

5

8

7

6

9

Fla

ng

e M

ou

nt

Available in

ededTechnology

2

Flush Lens Regressed Lens White Blade Semi-spec Blade

Fla

ng

e M

ou

nt

The Regolo fl ange mount luminaire is design to work in inaccessible type installations. Flanged units are supplied with adjustable support yokes to work with ceiling materials between 3/8” to 1-1/4” thick. Nulite provides a ceiling jig with all fl ange orders to ensure a proper cutout.

The fl ange style is available in LED and linear fl uorescent as individual or continuous row mounting.

3-5/8” [92mm]

2” [51mm]

Flange-to-fl ange

6-3/

16”

[157

mm

]

3/8”

[10m

m] M

in.

6-7/

8” [1

75m

m] M

ax.

1-1/

4” [3

2mm

] Max

.

4-5/8” [117mm]

3” [76mm]

Flange-to-fl ange6-5/8” [168mm]

5” 127mm]

Flange-to-fl ange

RF2 RF4 RF6

RF Series

Fluorescent Staggered Lamp OptionOur staggered fl uorescent lamp option mini-mizes socket shadows in continuous run ap-plications. Our staggered runs are available in 6” increments, with lamp overlap of 6” for T8 and 4” for T5/T5HO. We recommend our satin white lens for lens brightness uniformity.

Satin White LensThis diffuser is designed for visible lens brightness uniformity. It’s recommended for staggered lamp confi gurations.(Transmission ~ 69%)

Frosted LensThis diffuser is designed for a balance between effi ciency and lens uniformity.(Transmission ~ 89%)

Frosted

SatinWhite

24”25-1/2”

36”37-1/2”

48”49-1/2”

72”73-1/2”

96”97-1/2”

23-3/8”24”

35-3/8”36”

47-3/8”48”

71-3/8”72”

95-3/8”96”G

rid

Leng

ths

Flan

ge L

engt

hsG

rid

Det

ails

1” Grid 9/16” Grid Screw Slot Grid

(See specifi cation sheets for continuous staggered fl uorescent row lengths.)

Non-Staggered Run Length

Num

ber

of H

ousi

ngs

Shaded columns require all 4’ lamps.Add a 1/2” to the non-staggered run length for the ceiling cutout dimension. See our installation instructions.End fl anges add 1-1/2” to the overall non-staggered run length.

Individual Lengths

Non-Staggered Run Length

2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’ 10’

11’

12’

13’

14’

15’

16’

17’

18’

19’

20’

21’

22’

23’

24’

25’

26’

27’

28’

29’

30’

31’

32’

33’

34’

35’

36’

37’

38’

39’

40’

41’

42’

43’

44’

2’ 1 1

3’ 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

4’ 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

6’ 1 1 1 1 1 1 3 3 1 1 1 1 1 1 1 1 1 1 1

8’ 1 1 1 1 1 2 1 2 2 2 2 3 2 2 3 3 2 3 3 4 3 3 4 4 3 4 4 5 4 4 5 5

Num

ber

of H

ousi

ngs

Shaded columns require all 4’ lamps.

(See specifi cation sheets for continuous staggered fl uorescent row lengths.)

Individual Lengths

2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’ 10’

11’

12’

13’

14’

15’

16’

17’

18’

19’

20’

21’

22’

23’

24’

25’

26’

27’

28’

29’

30’

31’

32’

33’

34’

35’

36’

37’

38’

39’

40’

41’

42’

43’

44’

2’ 1 1

3’ 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

4’ 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

6’ 1 1 1 1 1 1 3 3 1 1 1 1 1 1 1 1 1 1 1

8’ 1 1 1 1 1 2 1 2 2 2 2 3 2 2 3 3 2 3 3 4 3 3 4 4 3 4 4 5 4 4 5 5

235

470

705

941

169

337

506

675

350

699

1049

1398

135

270

405

541

662

1325

1987

2650

390

780

1171

1561

307

613

920

1227

R(G/F)2-05L40...FRF-4’Frosted Flush LensWattage - 26.2Lumens/Watt - 65

R(G/F)2-1T5...FRF-4’Frosted Flush LensInitial Lamp Lumens - 2600

R(G/F)4-06L40...FRF-4’Frosted Flush LensWattage - 34.9Lumens/Watt - 72

ededTechnology

ededTechnology

ededTechnology



R(G/F)6-13L40...FRF-4’Frosted Flush LensWattage - 69Lumens/Watt - 81

R(G/F)6-2T8...SB-4’Semi-specular Cross BladeInitial Lamp Lumens - 5600


324

648

972

1296

Ph

oto

me

tric Cu

rves

RG2 or RF2

RG4 or RF4

RG6 or RF6


117

234

351

468

Gri

d M

ou

nt Construction: The housing consists of visible extruded aluminum trim rails with formed cold rolled steel back chan-

nel and heavy gauge end caps. Stainless steel alignment tabs and white snap-in joiner clips are used for continuous row applications. Luminaire is fi nished textured white.

Refl ector / Ballast: Ballast cover / refl ector is fi nished with high refl ectance white paint. Standard electronic, Class P, ballast. Universal (UNV) voltage ballast is from 120 - 277V.

Shielding: Extruded frosted acrylic or satin white acrylic snap-in lens with DR; semi-specular cross blade or white cross blade baffl e.

Fluorescent: 1 lamp cross-section T5, T5HO or T8. Optional staggered lamp confi guration for continuous runapplications over 6’. Luminaire can be ordered with lamps, consult factory.


Mounting: Grid ceiling types. Non-IC rated. Individual mount or continuous runs.

Labels: (Fluorescent) UL / cUL listed, Non-IC rated. Damp location is optional. (LED) ETL listed, conforms to ULstandard 1598 and 8750. Dry location listed, optional Damp location is available.

Grid Mount Specifi cations

Fluorescent Ordering: (example) RG4-1T5HO-S-UNV-PSN-1C-FRR-20’

LED Ordering: (example) RG4-06L35-UNV-DIM-1C-FRF-20’

Series

Lam

pSta

gger

ed

Voltag

e

Ballas

t

Circuit

Shieldi

ng

Leng

th

Option

s

IS (Standard)

PS

HEIS

HEPS

N Normal (Standard)

L Low

H High

DIM DimmingSD Step Dimming

T8 Options

PS (Standard)

HEPS

T5 / T5HO

All Lamp Dimming Options

Ballast Factor

IS=Instant StartPS=Program StartHEIS=High Effi ciency Instant StartHEPS=High Effi ciency Program Start

Ballast Factor

N Normal

RG2(Grid - Nom. 2”)



UNV

120

277

347

2’

3’

4’

6’

8’

1T5

1T5HO

1T8

2T5

2T5HO

2T8

3T5

3T5HO

3T8

Continuous RunsXX’ Specifyrun length in 1’ increment for non-stag-gered and 6” increments for staggered.

N(Non-staggered)

S(Staggered lamps)

1C Single Circuit

2C Dual Circuit


2E Dual Circuit w/ EM Circuit


2B Dual Circuit w/ Battery Pack

FR(Frosted)

ST(Satin white)

SB(Semi-spec Blade)

WB(White Blade)

DL Damp Location

GLR Fusing

Blank for Baffl e

F(Flush lens)

R(Regressed lens)

Not all options are available. Refer to specifi cation sheet for specifi c series before ordering.

Series

Lum

en P

acka

ge

Voltag

e

Driver

Circuit

Shieldi

ng

Leng

th

Option

s




UNV

120

277

2’

3’

4’

6’

8’


1C Single Circuit



FR(Frosted)

ST(Satin white)

DL Damp LocationF(Flush lens)

R(Regressed lens)


LED C

olor

Positio

n

Positio

n

DIM Dimming (0-10V)L30

L35

L40

05 (~500 lm/ft)

06 (~600 lm/ft)

09 (~900 lm/ft)

10 (~1000 lm/ft)

13 (~1300 lm/ft)

17 (~1700 lm/ft)

SD Step Dimming Module

Fla

ng

e M

ou

nt

Construction: The housing consists of visible extruded aluminum trim rails with formed cold rolled steel back channel and heavy gauge end caps. Stainless steel alignment tabs and white snap-in joiner clips are used for continuous row applications. Luminaire is fi nished textured white. Optional fl ange colors available.

Refl ector / Ballast: Ballast cover / refl ector is fi nished with high refl ectance white paint. Standard electronic, Class P, ballast. Universal (UNV) voltage ballast is from 120 - 277V.

Shielding: Extruded frosted acrylic or satin white acrylic snap-in lens with DR, semi-specular cross blade or white cross blade baffl e.

Fluorescent: 1 or 2 lamp cross-section T5, T5HO or T8. Optional staggered lamp confi guration for continuous run applications over 6’. Luminaire can be ordered with lamps, consult factory.


Mounting: Flanged for inaccessible ceiling types. Non-IC rated. Individual mount or continuous runs.

Labels: (Fluorescent) UL / cUL listed, Non-IC rated. Damp location is optional. (LED) ETL listed, conforms to ULstandard 1598 and 8750. Dry location listed, optional Damp location is available.

Flange Mount Specifi cations

Fluorescent Ordering:

LED Ordering: (example) RF6-10L35-UNV-DIM-1C-STF-20’

Series

Lam

pSta

gger

ed

Voltag

e

Ballas

t

Circuit

Shieldi

ng

Leng

th

Option

s

IS (Standard)

PS

HEIS

HEPS

N Normal (Standard)

L Low

H High

DIM DimmingSD Step Dimming

T8 Options

PS (Standard)

HEPS

T5 / T5HO

All Lamp Dimming Options

Ballast Factor

IS=Instant StartPS=Program StartHEIS=High Effi ciency Instant StartHEPS=High Effi ciency Program Start

Ballast Factor

N Normal

RF2(Flange - Nom. 2”)



UNV

120

277

347

2’

3’

4’

6’

8’

1T5

1T5HO

1T8

2T5

2T5HO

2T8

3T5

3T5HO

3T8


N(Non-staggered)

S(Staggered lamps)

1C Single Circuit

2C Dual Circuit


2E Dual Circuit w/ EM Circuit


2B Dual Circuit w/ Battery Pack

FR(Frosted)

ST(Satin white)

SB(Semi-spec Blade)

WB(White Blade)

DL Damp Location

GLR Fusing

Blank for Baffl e

F(Flush lens)

R(Regressed lens)


Positio

n

Series

Lum

en P

acka

ge

Voltag

e

Driver

Circuit

Shieldi

ng

Leng

th

Option

s



RGF(Flange - Nom. 6”)

UNV

120

277

2’

3’

4’

6’

8’


1C Single Circuit



FR(Frosted)

ST(Satin white)

DL Damp LocationF(Flush lens)

R(Regressed lens)


LED C

olor

Positio

n

DIM Dimming (0-10V)L30

L35

L40

05 (~500 lm/ft)

06 (~600 lm/ft)

09 (~900 lm/ft)

10 (~1000 lm/ft)

13 (~1300 lm/ft)

17 (~1700 lm/ft)

SD Step Dimming Module

Product design and development is an ongoing process at Axis Lighting. We reserve the right to change specifications. Contact Axis for the latest product information. © 2012 Axis Lighting Inc. 1 / 7Page:

1 . 8 0 0 . 2 6 3 . A X I S[T] 514.948.6272[F] 514.948.6271www.axislighting.com

FILE NAME:BBD.LED-B3.SPEC March 1, 2016

Project:

Type:

Notes:

PROJECT INFORMATION

DIMENSIONS -SECTION VIEWS

PENDANT - DIRECT

4 5/32”

5 1/2”

4 5/32”

5 1/2”

5LED

BOARD & DRIVER

LUMINAIREWARRANTY

YEAR

PRODUCT SPECIFICATIONS

ORDERING CODE

9 MR (OPTIONAL) 10 FINISH 11 VOLTAGE 12 DRIVER 13 CIRCUITSM16LED(#) MR 16 LED AP aluminum paint 120 120 V D dimming (0-10V) standard 1 1 circuit

W white 277 277 V DP dimming (0-10V) 1% 2 2 circuitsBLK black 347 347 V LT lutron (2) +E(#) emergency circuit(4)

C custom UNV universal BI bi-level dimming +NL(#) night light circuit(4)

O other (3) +GTD(#) generator transfer device(4)

+M MRAdd 9” per lamp, Specify quantitySeparate circuits includedRequires 120V or 277V

(2) Specify system(3) Please consult factory

(4) Specify quantity

14 MOUNTING/SUSPENSION 15 BATTERY (OPTIONAL) 16 OTHER (OPTIONAL) 17 IC CONTROLS (OPTIONAL) 18 CUSTOM (OPTIONAL)CA(#) drywall+cable length (36” std.) B# battery pack 4’ sections F fuse (5) DS# daylight sensor C custom

CT9(#) TB/TG 9/16+cable length (36” std.) D dust cover OS# occupancy sensor CT15(#) TB/TG15/16+cable length (36” std.) DOS# daylight & occupancy sensorCTS(#) ST+cable length (36” std.) EN# enlighted integral (6)

SA(#) drywall+stem length >48” (18” std.) ENR# enlighted remote (6)

+SM seismic optionRequires 120V or 277V Please consult factory

(5) Requires 120V or 277V (6) Please consult factorySpecify quantity. Requires 8" blank. See pages 4-5 for more details.

Please specify

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

PERFORMANCE PER LINEAR FOOT AT 4000K

NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY

400 lm/ft 3.3 W/ft 122 lm/W

500 lm/ft 4.3 W/ft 117 lm/W

750 lm/ft 6.8 W/ft 109 lm/W

1000 lm/ft 9.5 W/ft 105 lm/W

* Based on a 4 foot luminaire using one driverPlease consult factory for customize lumen output and wattage.

CONTROLSENSORS

MidFlex

1 PRODUCT ID 2 VERSION 3 LIGHT ENGINE 4 NOM. LUMENS/FT 5 CRI 6 COLOR TEMP. 7 SHIELDING 8 LENGTHBBDLED pendant direct led B3 B3 version MF mid flex LED 400 400 lm/ft 80 80 CRI 30 3000 K SO spotless lens 2 2’

500 500 lm/ft 90 90 CRI (1) 35 3500 K 3 3’750 750 lm/ft 40 4000 K 4 4’

1000 1000 lm/ft 5 5’8 8’

12 12’S# System Run

(1) Not available with 4000K

CABLE STEM

LED LUMEN, COLOR, AND CRI TOMATCH F1 FIXTURE, NOTIFYARCHITECT OF ANYDISCREPANCIES TO OBTAINCLARIFICATION.

https://www.designlights.org/qpl#results




PENDANT - DIRECT

WARRANTY

Axis lighting will warrant defective LEDs, boards, and drivers for 5 years from date of purchase. Warranty is valid if luminaire is installed and used according to specifications.If defective, Axis will send replacement boards or drivers at no cost along with detailed replacement instructions and instructions on how to return defective components to Axis.

WEIGHT

BEAM 4 linear systems, with the use of a strong profile, allow for a nearly hair thin connection system of continuous runs.Lengths of 4', 8', 12' as well as custom lengths are available. Runs of BEAM 4 that are greater than 12' in length are designated as systems (S#). This means that the run is comprised of a combination of 4', 8' and/or 12' sections to be assembled on site using our joining system. For more information on systems and joining, please refer to the BEAM installation sheets available for download at www.axislighting.com.

SYSTEM (S#)

FINISH

Powder Coated and custom finishes are also available.

APPROVALS

Certified to UL and CUL standards Meets NYC requirementsSuitable for damp locations.

4 ft 14.5 lbs / 6.6 kg8 ft 29.0 lbs / 13.2 kg12 ft 43.5 lbs / 19.7 kg

SPECIFICATIONS

CONSTRUCTION Housing Extruded Aluminum (0.075'' nominal) up to 70% recycled contentEnd Cap Sheet Steel (18 ga)Interior Brackets Die Formed Sheet Steel (18 ga)Reflectors White Powder Coated Sheet Steel (22 ga)Blank Extruded Aluminum (0.075'' nominal)Lens Spotless frosted acrylic lensHanger Die Formed Sheet Steel (16 gauge)Suspension Aircraft Cable or Ø 1/2" StemCable Grips Quick Connecting / Release

Unlit Corners - BEAM4 features a multitude of layout patterns with the use of a number of corners, 90° corner, T or X junctions. 900 unlit corner

90° corner X junction T junction

Lit Corners - In addition Axis offers Lit 90° Corners including Ceiling to Ceiling, Wall to Ceiling and Ceiling to Wall. wall to ceiling

lit corner

CORNERS

For custom corner angles, please consult factory. Specifications sheets for all corners are available at: www.axislighting.com

JOINERS

In order to allow very long runs of BEAM 4 luminaires, Axis has developed an effective joining system. Special care has been taken to maximize the performance of the joiner for each BEAM option.

NOTE: Hang each system segment individually.Do not assemble system prior to hanging.

ELECTRICAL

Lutron driver L3D - Hi-Lume A-Series EcoSystem 3-Wire Control (1%)LDE1 - EcoSystem H-Series (1%)LDE5 - EcoSystem 5-Series (5%)LTE - Hi-Lume® A-series 2Wires Forward Phase (1%)

Other drivers DALI - Digital Addressable Lighting InterfaceDMX - Digital MultiplexELV - Electronic Low Voltage dimmingLV - line voltage - Advance Mark 10redwood - Building Intelligence PlatformXitanium SR - For wireless sensor

Emergency Integral emergency battery pack or emergency circuit optional.

Input Voltage 120V, 277V, 347V, UNV.

Incorporating these components may have limitations or effect the length of the luminaire, please contact factory for more details.

OPTICS

SPOTLESS LENSFrosted acrylic snap-in lens with micro lens

SO spotless lens




PENDANT - DIRECT

Blank Extruded Aluminum (0.075'' nominal)MR16 LED 2.0'' diameterQuantity For every 4' section, there may be up to a maximum of 4 x MR16 LED lamps.Spacing Each MR16 LED lamp is placed centered on a blank section 9'' in length. For a series of MR16's within a given section length, they will be spaced evenly on a longer blank section. The directed light of MR16 LED lamps are fixed downward. Custom spacing may be available on special request.

MR16 LED LAMPS

CT TILE CEILING - ON GRID

Power feed

Power feed

Power feed

Non power feed

Non power feed

Non power feed

CA DRYWALL CEILING

SA STEM MOUNT IN DRYWALL CEILING

MOUNTING OPTIONS

4' (48" C.C.)8' (96" C.C.)12' (144" C.C.)

MOUNTING SPACING

Row configuration and mounting spacing fileis available for download at: www.axislighting.com

More options are available upon request.Please consult factory.

Base Type GU 5.3Beam Angle 40 nominal degreesInput Watts 6WNuminal Lumens 300 lumensEfficacy 50 lumens per wattColor Rendering Index (CRI) 85Central Beam Candle Power (CBCP) 584 candelasLife 25,000 hours at L70Correlated color temperature (CCT) 2700K

BEAM 4 LED is also available with recessed, surface, wall and recessed vertical mounted options.

Specification sheets and Installation sheets for all mounting for BEAM luminaires are available for download at www.axislighting.com

OTHER MOUNTING OPTIONS

2"

4 5/32"

51/2"

9"

Betweensections

Several in a long blank

section

9"

At luminare ends




PENDANT - DIRECT

CONTROLSENSORS

BEAM 4 LED luminaires allow the use of integrated controls such as daylight sensors (DS),occupancy sensors (OS) and combination daylight/occupancy sensors (DOS). These options canbe seamlessly integrated into our luminaires. The control system could be used to optimize thelighting of the space by reducing energy consumption through daylight harvesting and occupancy, thereby improving the overall interior environment and allowing for LEED credits.

● Consult factory for other options.

INTEGRATED CONTROL OPTIONS

EC-DIR-WH, FD-301Luxsense, Micro Luxsense

With daylight sensors, maximum lamp output is reduced according to the available amount of natural light. By reducing maximum lamp output, energy consumption is reduced by up to 20 percent in a process known as “Daylight Harvesting”.

DAYLIGHT HARVESTING (DS):

Shown with Luxsense

When a room is vacated, occupancy sensors ensure the light will be turned off after a programmed delay as well as ensuring that light remains on while the room is occupied.

OCCUPANCY (OS):

Shown with FS-205

FS-205, FS-355,FS-155 - Line VoltageFS-505, FS-505C

The integrated control systems offered are:

A combination of Daylight & Occupancy sensor from Philips, ACTILUME along with 0-10V or DALI ballasts can be used in one form factor.

DAYLIGHT HARVESTING AND OCCUPANCY (DOS):

Shown with Actilume DALI

Actilume 1-10VActilume DALI

INSTALLATION EXAMPLE

Sensor location option

controlsoption

ENLIGHTED INTEGRAL (EN) / ENLIGHTED REMOTE (ENR):

A combination of Daylight , Occupancy & Temperature autonomously control illumination levels, monitoroccupancy and environmental conditions. Data is transmitted wirelessly to the Enlighted networked management system.




PENDANT - DIRECT

SENSORS BRAND Model TYPE

Daylight Sensor (DS)

Lutron EC-DIR-WH Daylight, IR

Wattstopper FD-301 DaylightPhilips Luxsense, LR1220/00 DaylightPhilips Micro Luxsense DaylightWattstopper LS-102 Light Saver (Ambient light level)

Occupancy Sensor (OS)

Wattstopper FS-205v2 PIR Occupancy & Ambient light levelWattstopper FS-355 (need lenses) PIR Occupancy & Ambient light levelWattstopper FS-155 PIR Occupancy & Ambient light levelWattstopper FS-505 Ultrasonic Occupancy (Staircase)Wattstopper FS-505C Ultrasonic Occupancy (Open Area)Wattstopper FM-105 High Frequency Occupancy (Wet)Lutron TriPakWireless LRF2-OCR2B-P-WH PIR Occupancy

Lutron LOS-CDT Ultrasonic Occupancy + PIRLutron LOS-CIR PIR Occupancy

Daylight & Occupancy Sensors (DOS)

Philips Actilume, LR11655 Daylight & PIR Occupancy

Wattstopper FS-305 (need Lenses) PIR OccupancyWattstopper FS-305 RC PIR Occupancy & Ambient light levelCreston GLS Series Daylight and/or PIR OccupancyEchofl ex MOS Series Daylight and/or PIR Occupancy

Enlighted sensor (EN, ENR)

Enlighted integral / remote

SU-3E-00 Daylight, Occupancy & temperature





PENDANT - DIRECT

All IES files for other lamping are available for download at: www.axislighting.com

Luminaire Lumens: 500 lm/ftInput Watts: 4.3 W/ftEfficacy: 117 lm/WIES FILE: BBDLED-B3-MF-500-80-40-SO.IES

TESTED ACCORDING TO IES LM-79-2008

0° 15°15°

30°

45°

60°

75°

90°

30°

45°

60°

75°

90°

0°90°

224

673

448

897

500 lm/ft



0° 15°15°

30°

45°

60°

75°

90°

30°

45°

60°

75°

90°

0°90°

179

538

359

718

400 lm/ft

PHOTOMETRIC DATA

Horizontal Angles

Vertical Angle 0 22.5 45 67.5 90

0 718 718 718 718 7185 710 712 709 711 71315 668 668 660 653 65225 591 585 568 552 54635 489 479 454 432 42345 377 368 342 319 31055 269 261 240 220 21265 170 164 150 137 13275 85 81 74 69 6685 19 18 18 17 1790 0 0 0 0 0

CANDELA DISTRIBUTION

Horizontal Angles


0 897 897 897 897 8975 887 890 886 889 89115 835 835 825 816 81525 739 731 710 690 68335 611 599 568 540 52945 472 460 427 399 38755 337 326 300 275 26565 213 205 187 172 16575 106 101 93 86 8285 24 22 22 21 2190 0 0 0 0 0


LUMINANCE DATA (CD/M2)

Horizontal Angles

Vertical Angle 0 45 90

45 4694 4250 385655 4132 3679 325765 3548 3119 274775 2873 2523 224385 1942 1804 1665


Horizontal Angles


45 5868 5312 482055 5165 4599 407265 4435 3899 343475 3592 3154 280385 2428 2255 2081

PHOTOMETRIC CURVE

PHOTOMETRIC CURVE

ZONAL LUMENS

Lumens

Zone

00-10 6710-20 18620-30 26130-40 28540-50 26550-60 21560-70 15070-80 8080-90 21

90

ZONAL LUMENS

Lumens

Zone

00-10 8410-20 23220-30 32630-40 35640-50 33150-60 26960-70 18770-80 10080-90 26

90




PENDANT - DIRECT

All IES files for other lamping are available for download at: www.axislighting.com



0° 15°15°

30°

45°

60°

75°

90°

30°

45°

60°

75°

90°

0°90°

443

1330

887

1773

1000 lm/ft



0° 15°15°

30°

45°

60°

75°

90°

30°

45°

60°

75°

90°

0°90°

336

1009

673

1345

750 lm/ft

PHOTOMETRIC DATA

Horizontal Angles


0 1345 1345 1345 1345 13455 1331 1335 1329 1334 133615 1253 1253 1237 1224 122325 1108 1097 1064 1035 102435 916 898 852 809 79445 707 689 640 598 58155 505 490 450 412 39865 320 308 281 258 24775 159 152 139 129 12485 36 34 34 32 3190 0 0 0 0 0


Horizontal Angles


0 1794 1794 1794 1794 17945 1775 1780 1771 1778 178215 1670 1670 1649 1632 163125 1478 1462 1419 1380 136635 1222 1198 1136 1079 105845 943 919 854 797 77555 674 653 600 550 53165 426 411 375 344 33075 211 203 186 172 16585 48 45 45 43 4190 0 0 0 0 0



Horizontal Angles


45 8802 7968 723155 7748 6898 610765 6653 5848 515075 5388 4731 420585 3642 3380 3122


Horizontal Angles


45 11736 10624 964155 10331 9197 814365 8870 7797 686775 7183 6307 560785 4856 4509 4162

PHOTOMETRIC CURVE

PHOTOMETRIC CURVE

ZONAL LUMENS

Lumens

Zone

00-10 12610-20 34820-30 49030-40 53440-50 49650-60 40460-70 28170-80 15080-90 39

90

ZONAL LUMENS

Lumens

Zone

00-10 16810-20 46420-30 65330-40 71240-50 66250-60 53860-70 37470-80 20080-90 52

90


ORDERING CODE

RegressedFlush

5 3/4"5"

4 5/32”4 5/32”

3/4"

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

1 PRODUCT ID 2 OPTICS DIRECT 3 OPTICS POSITION 4 LENGTH 5 SPECIFY LENGTH 6 LAMPBBR recessed S satin lens FL flush 2 2’ NL nominal (3’ & 4’ lamps) T5 T5

F frosted lens RG regressed 3 3’ NL4 nominal (4’ lamps only) T5HO T5HOPL semi spec. para. louvers(1) 4 4’ EX exact (3’ & 4’ lamps) T8 T8B blank 5 5’ EX4 exact (4’ lamps only)

6 6’8 8’

12 12’S# System Run

(1) please consult factory

7 LAMP CONFIGURATION 8 MR/CB DOWNLIGHT 9 FINISH 10 VOLTAGE 11 BALLAST 12 CIRCUITS0 0 lamp CB21225# Fixed LED 1-3/4" dia 1250lm 25deg (3) W white 120 120V D dimming 1 1 regular1 1 lamp CB21234# Fixed LED 1-3/4" dia 1250lm 34deg (3) C custom 277 277V E instant start(6) 2 2 regular2 2 lamps CB21246# Fixed LED 1-3/4" dia 1250lm 46deg (3) 347 347V(5) ERS program start 2A/B 2 alternating

+S staggered (2) CB20925# Fixed LED 1-3/4" dia 900lm 25deg (3) UNV universal BI bi-level dimming +E(#) emergency sectionCB20934# Fixed LED 1-3/4" dia 900lm 34deg (3) +NL(#) night light sectionCB20946# Fixed LED 1-3/4" dia 900lm 46deg (3) +GTD(#) generator transfer device

M16# Adj. MR 16 halogen lamp (by others)(4) +M MRM16LED# Adj. MR 16 LED lamp (provided) (4)

(2) available with 1 lamp only (3) Available in 3000K. Consult factory for other CCT's; comes with 5" deep extrusion - see pg.3(4) See page 5 for more detailsRequires 120V or 277V

(5) Please consult factory

(6) Available with T8 lamp only

13 MOUNTING/SUSPENSION 14 BATTERY 15 OTHER 16 IC CONTROLS 17 CUSTOMTB9 t-bar 9/16” B# battery pack 4’ sections F fuse DS# daylight sensor C custom

TB15 t-bar 15/16” EF end feed OS# occupancy sensorST screw slot t-bar FW(#) flex whip (6’ std) DS+OS# daylight+occupancy sensor

TG9 tegular 9/16” CP Chicago plenum DOS# daylight&occupancy sensorTG15 tegular 15/16”

DF drywall flangeD drywall flangeless

DB slip-through bracketDS drywall spackle flange

See integrated controls guide for further details Please specify



FILE NAME:BBR.SPEC May 17, 2016

RECESSED MOUNT WITH 1-3/4" DOWNLIGHT INSERT OPTION

Project:

Type:

Notes:

PROJECT INFORMATION

DIMENSIONS

SHOWN WITH DOWNLIGHT INSERTSHOWN WITH LENS OPTION






Housing Extruded Aluminum (0.095'' nominal) up to 70% Recycled ContentInterior Brackets Die Formed Sheet Steel (18 ga)Reflectors White Powder Coated Sheet Steel (22 ga) Louvers Die Formed Semi-Specular Aluminum (22 ga) White Louvers Die Formed Aluminum Painted White (22 ga)Blank Extruded Aluminum (0.075'' nominal)Lenses Extruded Acrylic (0.070'' nominal) Satin: 68% trans. Frosted: 85% trans.

T-Bar Bracket Die Formed Sheet Steel (16 ga) Screw Slot T-Bar Bracket Die Formed Sheet Steel (16 ga)

Slip-Through Bracket Die Formed Sheet Steel (18 ga)Spackle Flange Die Formed Perforated Sheet Steel (20 ga)Flange Extruded Aluminum (0.075'' nominal) visibleflangewidth:9/16"

WEIGHT

CONSTRUCTION

BEAM4linearsystems,withtheuseofastrongprofile,allowforanearly hair thin connection system of continuous runs.Lengths of 4', 8', 12' as well as custom lengths are available. Runs of BEAM 4 that are greater than 12ft in length are designated as systems (S#). This means that the run is comprised of a combination 4ft, 8ft and/or 12ft sections to be assembled on site using our joining system. For more information on systems and joining, please refer to the BEAM installation sheets available for download at www.axislighting.com.

SYSTEM (S#)

FINISH

PowderCoatedandcustomfinishesarealsoavailable.

APPROVALS

CertifiedtoULandCULstandardsMeets NYC requirementsMeets CCEC requirements (Chicago plenum)Suitable for damp locations.

STAGGERED LAMPING

LAMP TYPE T5 T5HO T81 lamp ● ● ●

When BEAM 4 is used in continuous runs longer than 4', staggered lamping can be used to eliminate the appearance of socket shadows at the ends of the lamps. BEAM 4 uses a staggered overlap of 4 different bracket lengths (3.5”, 4”, 4.5” and 5”), along with 3’ and 4’ lamps, allowing us to match almost any row length requirements with optimal results. For example 3 x 3' T5 lamps can be used to completely illuminate the lens of an 8' luminaire.

Staggered 1 Lamp

Min. 3.5" to Max. 5"

JOINERS

In order to allow very long runs of BEAM luminaires, Axis has developed a number of different joining systems. Special care has been taken to maximize the performance of the joiner for each BEAM option.

4 ft 14.5 lbs / 6.6 kg8 ft 29.0 lbs / 13.2 kg12 ft 43.5 lbs / 19.7 kg

NOTE: Hang each system segment individually.Do not assemble system prior to hanging.

TB JOINER


ELECTRICAL

Ballast Electronic IS, Electronic Rapid Start, Dimming (0-10V, Line, EcoSystem, DALI), BI-level dimmingWith preinstalled ballast disconnect as per NEC & CEC

Emergency Emergency battery pack or emergency circuitVoltage 120V,277V,347V,UNV


Horizontal Angles ZonalLumens


0 2716 2716 2716 2716 2716 165 2498 2498 2498 2498 2498 11915 1059 1059 1059 1059 1059 15025 510 510 510 510 510 11835 251 251 251 251 251 7945 28 28 28 28 28 1155 0 0 0 0 0 065 0 0 0 0 0 075 0 0 0 0 0 085 0 0 0 0 0 090 1 1 1 1 1 0

PHOTOMETRIC CURVE

AllIESfilesareavailablefordownloadat:www.axislighting.com

PHOTOMETRIC DATA FOR CHIP ON BOARD (CB) DOWNLIGHT

CB20925#Fixed LED 1-3/4" diameter 900lm 25deg

ACTUAL LUMEN: 929 lmINPUT WATTS: 13 WEFFICACY: 72 lm/WCRI: 90IES FILE: CB20925.ies



0°15° 15°90°0° 30°

60°

45°

90°

30°

60°

45°

90° 0°

679

1358

2037

2716

Blank Extruded Aluminum (0.075'' nominal)CB2 1-3/4"diameterfixed,900or1250lumen, 25º, 34º, 46º; 3000K, R9=70, CRI=90, 3 Macadam EllipseQuantity Allow minimum 1ft distance between multiple units.

LED DOWNLIGHT INSERT

PERFORMANCE

LUMENS WATTS EFFICACY

CB209 950 12.9 W/ft 73 lm/W

CB212 1270 17.8 W/ft 71 lm/W

5"

BetweenLED lensed

sections

Several in a long blank section

At luminaire ends

5"

variable (min. 1ft)

1 3/4" 1 3/4"

4 5/32" 4 5/32"

4 15/32" 4 9/32"

5 3/4"

3/4"

5"

Flush

Hole Width

Regressed

Hole Width





AllIESfilesareavailablefordownloadat:www.axislighting.com




0 1267 1267 1267 1267 1267 85 1250 1250 1250 1250 1250 6015 993 993 993 993 993 14125 608 608 608 608 608 14135 317 317 317 317 317 10045 49 49 49 49 49 1955 3 3 3 3 3 165 0 0 0 0 0 075 0 0 0 0 0 085 0 0 0 0 0 090 0 0 0 0 0 0

PHOTOMETRIC CURVE

0°15° 15°90°0° 30°

60°

45°

90°

30°

60°

45°

90° 0°

317

634

950

1267

PHOTOMETRIC DATA FOR CHIP ON BOARD (CB) DOWNLIGHT




0 2070 2070 2070 2070 2070 125 2012 2012 2012 2012 2012 9615 1181 1181 1181 1181 1181 16825 522 522 522 522 522 12135 259 259 259 259 259 8145 28 28 28 28 28 1155 0 0 0 0 0 065 0 0 0 0 0 075 0 0 0 0 0 085 0 0 0 0 0 090 0 0 0 0 0 0

PHOTOMETRIC CURVE





0°15° 15°90°0° 30°

60°

45°

90°

30°

60°

45°

90° 0°

518

1035

1553

2070


ACTUAL LUMEN: 914 lmINPUT WATTS: 13 WEFFICACY: 71 lm/W CRI: 90IES FILE: CB20946.ies







Blank Extruded Aluminum (0.075'' nominal)

MR16 Halogens Adjustable halogen lamp 35W / 50W (by others)

MR16 LED Adjustable LED lamp (provided)

Quantity For every 4' lamp section, there may be up to a maximum of 4 downlights.

Spacing Each MR16 is placed centered on a blank section 9" in length. Within a given section length, a series of downlights will be spaced evenly on a longer blank section. Custom spacing available on special request.

MR16 LAMP DOWNLIGHT

9"

variable

Betweenfluorescentlamps sections

Several in a long blank section

9"

At luminaire ends

5"

2"

4 5/32"

CORNERS - ONLY AVAILABLE WITH 4 3/4" EXTRUSION

Unlit Corners - BEAM 4 features a multitude of layout patterns with the use of a number of corners, 90° corner, T or X junctions.

900 unlit corner

90° corner X junction T junction

Lit Corners - In addition Axis offers Lit 90° Corners including Ceiling to Ceiling, Wall to Ceiling and Ceiling to Wall. wall to ceiling

lit corner

For custom corner angles, please consult factory. Specificationssheetsforallcornersareavailableat: www.axislighting.com

OPTICS

SATIN & FROSTED LENS(acrylic snap-in lens)satin: 68% trans.frosted: 85% trans.

LOUVERS (semi-spec. parabolic louver)

S satin lens F frosted lens

PL semi-specular parabolic louvers









4 5/32”

4 9/32”

5”

2 11/16”

Hole width

5”

2 11/16”

4 23/32”

5 9/32”

4 5/32”

Hole width

With flanges

4 5/32”

5”

2 11/16”

4 23/32”

5 9/32” Hole width

With flanges

4 5/32”

2 11/16”

5”

4 29/32”

6 21/32” Hole width

With flanges

DRYWALL CEILING MOUNTING OPTIONS


BEAM 4 is also available with pendant, surface, wall, asymmetric, recessed wall and wall wash mounted options.

SpecificationsheetsandInstallation sheets for all mounting for BEAM luminaires are available for download at www.axislighting.com

TB CEILING MOUNTING OPTIONS

D FLANGELESS WITH 1/4-20 STUD MOUNTING

DB VISIBLE FLANGES WITH SLIP-THROUGH BRACKET

DF VISIBLE FLANGES WITH 1/4-20 STUD MOUNTING

DS SPACKLE FLANGES

TB15 15/16" T-BAR ST SCREW SLOT T-BAR

TG15 15/16" TEGULAR

TB9 9/16" T-BAR

TG9 9/16" TEGULAR

2 11/16”

4 5/32”

5”

4 5/8”

4 3/4” With flanges

T-bars spacing

2 11/16”

4 5/32”

5”

4 5/8”


T-bars spacing

2 11/16”

4 5/32”

5”

4 31/32”


T-bars spacing

2 11/16”

4 5/32”

5”

4 5/8”


T-bars spacing

2 11/16”

4 5/32”

5”

4 31/32”


T-bars spacing





BEAM 4 luminaires allow the use of integrated controls such as daylight sensors (DS),occupancy sensors (OS), individual daylight sensors and occupancy sensors (DS+OS),and combination daylight/occupancy sensors (DOS). These options can be seamlessly integrated into our luminaires. The control system could be used to optimize the lighting of the space by reducing energy consumption through daylight harvesting and occupancy, thereby improving the overall interior environment and allowing for LEED credits.

● Consultfactoryforotheroptions.● RefertoICbrochureformoreinformation.

CONTROLSENSORS

SENSORS BRAND Model TYPE CODE COMPATIBLE DIMMING BALLAST

Daylight Sensor (DS)Lutron EC-DIR-WH Daylight LD EcoSystem

Wattstopper FD-301 Daylight WD 0-10VPhilips Luxsense Daylight PL 0-10V

Occupancy Sensor (OS) WattstopperFS-205 PIR Occupancy WP1 Programmed Rapid StartFS-355 PIR Occupancy WP2 Programmed Rapid StartFM-105 High Frequency Occupancy WH Programmed Rapid Start

Daylight & Occupancy Sensors (DOS) Philips Actilume Daylight & PIR Occupancy PA DALI or 0-10V





0 910 910 910 910 9105 896 910 896 902 898 4815 846 842 844 845 842 20325 745 743 745 736 736 32135 629 626 615 608 603 38145 492 485 477 463 459 37655 363 355 343 329 326 32665 240 234 226 216 211 24675 134 130 124 114 111 15385 45 42 36 32 31 6390 6 4 2 2 1


Horizontal Angles

Vertical Angle 0 45 9045 5044 3029 258655 4436 2272 186765 3766 1608 127075 3084 986 72585 2034 338 232

COEFFICIENTS OF UTILIZATION (%)

Based on floor reflectance of 20

1 T5

PHOTOMETRIC CURVE

Ceiling 80 70 50

Wall 70 50 30 10 70 50 30 10 50 30 10

0 87 87 87 87 85 85 85 85 81 81 811 80 77 74 71 78 75 72 70 72 70 682 73 67 62 58 71 66 61 58 63 60 563 67 59 54 49 65 58 53 49 56 52 484 62 53 47 42 60 52 46 42 50 45 415 57 48 41 37 55 47 41 36 45 40 366 53 43 37 32 51 42 36 32 41 36 327 49 39 33 29 48 39 33 29 38 32 288 46 36 30 26 45 35 30 26 35 29 269 43 33 27 23 42 33 27 23 32 27 2310 40 31 25 21 39 30 25 21 30 25 21

0°15° 15°90°0°

0°

30°

60°

45°

90°

30°

60°

45°

90°

809

607

405

202101

Test Lamp: 1xF28T5IES FILE: BBR-F-FL-4-T5-1

Efficiency: 73.1%

PHOTOMETRIC DATA

AllIESfilesforotherlampingareavailablefordownloadat:www.axislighting.com








0 940 940 940 940 9405 915 914 917 910 908 4915 858 870 866 865 861 20825 767 766 758 737 737 32835 639 640 611 584 573 38045 512 499 460 421 408 36755 373 358 315 279 270 30665 249 229 190 163 153 21975 138 118 87 69 65 12385 38 25 20 20 20 4190 2 3 2 2 2


Horizontal Angles

Vertical Angle 0 45 9045 4283 2409 190555 3704 1716 128265 3148 1112 76675 2504 569 35385 1315 157 120



1 T5

PHOTOMETRIC CURVE

Test Lamp: 1xF28T5IES FILE: BBR-F-RG-4-T5-1

Efficiency: 69.7%

Ceiling 80 70 50

Wall 70 50 30 10 70 50 30 10 50 30 10

0 83 83 83 83 81 81 81 81 78 78 781 77 74 71 68 75 72 70 67 69 67 652 70 65 61 57 69 64 60 56 61 58 553 65 58 52 48 63 57 52 48 55 50 474 59 52 46 42 58 51 45 41 49 44 415 55 47 41 36 54 46 40 36 44 39 366 51 42 36 32 50 42 36 32 40 35 327 47 38 33 29 46 38 32 28 37 32 288 44 35 30 26 43 35 29 26 34 29 259 42 33 27 23 41 32 27 23 31 27 2310 39 30 25 21 38 30 25 21 29 24 21

0°15° 15°90°0°

0°

30°

60°

45°

90°

30°

60°

45°

90°

836

627

418

209104




0 1764 1764 1764 1764 17645 1702 1709 1708 1701 1724 9215 1616 1590 1593 1595 1602 38525 1422 1406 1412 1385 1369 60935 1202 1185 1156 1135 1120 71745 939 920 896 869 854 70955 682 668 637 615 604 60965 452 441 420 397 388 45975 253 246 229 216 204 28785 88 79 66 60 57 11890 11 8 4 3 3


Horizontal Angles

Vertical Angle 0 45 9045 9628 5695 481655 8328 4217 346265 7089 2993 233675 5803 1828 133985 3946 621 421



2 T5

PHOTOMETRIC CURVE


Efficiency: 68.8%

Ceiling 80 70 50

Wall 70 50 30 10 70 50 30 10 50 30 10

0 82 82 82 82 80 80 80 80 77 77 771 75 72 69 67 73 71 68 66 68 65 642 69 63 59 55 67 62 58 54 60 56 533 63 56 51 46 61 55 50 46 53 49 454 58 50 44 40 56 49 44 39 47 43 395 53 45 39 34 52 44 38 34 43 38 346 50 41 35 30 48 40 34 30 39 34 307 46 37 31 27 45 36 31 27 35 30 278 43 34 28 24 42 33 28 24 33 28 249 40 31 26 22 39 31 26 22 30 25 2210 38 29 24 20 37 29 23 20 28 23 20

0°15° 15°90°0°

0°

30°

60°

45°

90°

30°

60°

45°

90°

1568

1176

784

392196

PHOTOMETRIC DATA









0 1560 1560 1560 1560 15605 1549 1558 1545 1562 1553 8415 1448 1455 1455 1461 1448 35125 1301 1293 1282 1271 1273 55735 1090 1084 1058 1050 1035 65845 846 842 830 806 793 65255 621 610 594 574 562 56365 417 405 388 370 361 42475 230 225 212 197 193 26585 80 72 61 55 53 10990 9 7 4 3 2


Horizontal Angles

Vertical Angle 0 45 9045 8671 5276 447255 7586 3930 322165 6550 2763 217575 5267 1694 126185 3625 574 395



1 T5HO

PHOTOMETRIC CURVE

Ceiling 80 70 50

Wall 70 50 30 10 70 50 30 10 50 30 10

0 87 87 87 87 85 85 85 85 82 82 821 80 77 74 71 78 75 72 70 72 70 682 73 67 63 59 71 66 62 58 63 60 573 67 60 54 49 65 58 53 49 56 52 484 62 53 47 42 60 52 46 42 50 45 415 57 48 41 37 55 47 41 36 45 40 366 53 43 37 32 51 43 37 32 41 36 327 49 39 33 29 48 39 33 29 38 32 288 46 36 30 26 45 36 30 26 35 29 269 43 33 27 23 42 33 27 23 32 27 2310 40 31 25 21 39 30 25 21 30 25 21

0°15° 15°90°0°

0°

30°

60°

45°

90°

30°

60°

45°

90°

1389

1041

694

347174

Test Lamp: 1xF54T5HOIES FILE: BBR-F-FL-4-T5HO-1

Efficiency: 73.3%




0 3023 3023 3023 3023 30235 2936 2942 2928 2909 2937 15815 2784 2773 2768 2771 2736 66725 2468 2458 2413 2395 2378 105035 2054 2030 2008 1955 1924 123545 1611 1594 1545 1495 1473 122555 1169 1160 1106 1059 1036 105365 783 767 719 681 678 79175 438 424 392 371 358 49685 149 139 116 101 95 20390 19 13 7 5 5


Horizontal Angles

Vertical Angle 0 45 9045 16513 9825 830055 14274 7322 594265 12284 5126 408575 10035 3130 234185 6696 1092 702



2 T5HO

PHOTOMETRIC CURVE

Test Lamp: 2xF54T5HOIES FILE: BBR-F-FL-4-T5HO-2

Efficiency: 68.8%

Ceiling 80 70 50

Wall 70 50 30 10 70 50 30 10 50 30 10

0 82 82 82 82 80 80 80 80 77 77 771 75 72 69 67 73 71 68 66 68 66 642 69 63 59 55 67 62 58 54 60 56 533 63 56 51 46 61 55 50 46 53 49 454 58 50 44 40 56 49 44 39 47 43 395 54 45 39 35 52 44 39 34 43 38 346 50 41 35 30 48 40 34 30 39 34 307 46 37 31 27 45 37 31 27 35 30 278 43 34 28 24 42 33 28 24 33 28 249 40 31 26 22 39 31 26 22 30 25 2210 38 29 24 20 37 29 23 20 28 23 20

0°15° 15°90°0°

0°

30°

60°

45°

90°

30°

60°

45°

90°

2687

2015

1344

672336

PHOTOMETRIC DATA









0 1570 1570 1570 1570 15705 1556 1558 1555 1569 1613 8415 1482 1480 1496 1483 1476 35725 1309 1323 1312 1270 1256 56435 1104 1104 1066 1008 983 65645 882 863 797 727 705 63555 641 619 542 482 457 52765 427 396 332 279 267 37675 238 202 148 117 110 21185 67 42 36 35 34 7290 5 4 4 4 3


Horizontal Angles

Vertical Angle 0 45 9045 7384 4170 329455 6356 2948 216965 5398 1944 133475 4322 968 59585 2296 275 211



1 T5HO

PHOTOMETRIC CURVE

Test Lamp: 1xF54T5HOIES FILE: BBR-F-RG-4-T5HO-1

Efficiency: 69.7%

Ceiling 80 70 50

Wall 70 50 30 10 70 50 30 10 50 30 10

0 83 83 83 83 81 81 81 81 78 78 781 77 74 71 68 75 72 70 67 69 67 652 70 65 61 57 69 64 60 56 61 58 553 65 58 52 48 63 57 52 48 55 50 474 59 52 46 41 58 51 45 41 49 44 415 55 46 41 36 54 46 40 36 44 39 366 51 42 36 32 50 42 36 32 40 35 327 47 38 33 29 46 38 32 28 37 32 288 44 35 30 26 43 35 29 26 34 29 259 42 33 27 23 41 32 27 23 31 27 2310 39 30 25 21 38 30 25 21 29 24 21

0°15° 15°90°0°

0°

30°

60°

45°

90°

30°

60°

45°

90°

1434

1075

717

358179




0 824 824 824 824 8245 811 812 809 812 794 4415 767 762 752 756 757 18225 664 668 657 650 646 28535 560 552 541 529 522 33545 439 428 416 403 399 33055 317 311 294 285 278 28365 208 205 195 185 180 21375 115 112 107 100 96 13385 40 37 31 28 27 5490 5 4 2 1 1


Horizontal Angles

Vertical Angle 0 45 9045 3881 2220 188355 3330 1624 132465 2784 1147 89775 2227 700 51385 1462 236 161



1 T8

PHOTOMETRIC CURVE

Ceiling 80 70 50

Wall 70 50 30 10 70 50 30 10 50 30 10

0 77 77 77 77 75 75 75 75 71 71 711 70 67 65 62 69 66 63 61 63 61 592 64 59 55 51 63 58 54 51 56 52 503 59 52 47 43 57 51 47 43 49 45 424 54 47 41 37 53 46 41 37 44 40 365 50 42 36 32 49 41 36 32 40 35 326 46 38 32 28 45 37 32 28 36 32 287 43 35 29 25 42 34 29 25 33 29 258 40 32 26 23 39 31 26 23 31 26 239 38 29 24 21 37 29 24 21 28 24 2110 35 27 22 19 35 27 22 19 26 22 19

0°15° 15°90°0°

30°

60°

45°

90°

30°

60°

45°

90° 0°

732

549

366

18392


Efficiency: 64.1%

PHOTOMETRIC DATA









0 896 896 896 896 8965 893 871 869 867 856 4715 825 820 821 825 820 19725 726 728 721 701 703 31235 613 615 586 557 546 36445 489 478 441 409 396 35355 355 345 302 271 257 29465 240 221 184 158 150 21175 131 113 82 66 61 11785 37 23 20 19 19 4090 2 2 2 2 2


Horizontal Angles

Vertical Angle 0 45 9045 3961 2232 178655 3418 1589 117865 2949 1040 72375 2328 522 31885 1232 150 113



1 T8

PHOTOMETRIC CURVE

Test Lamp: 1xF32T8IES FILE: BBR-F-RG-4-T8-1

Efficiency: 66.7%

Ceiling 80 70 50

Wall 70 50 30 10 70 50 30 10 50 30 10

0 80 80 80 80 78 78 78 78 74 74 741 73 70 68 66 72 69 67 64 66 64 622 67 62 58 54 66 61 57 54 59 55 533 62 55 50 46 60 54 49 46 52 48 454 57 49 44 40 55 49 43 39 47 42 395 53 44 39 35 51 44 38 34 42 38 346 49 40 35 31 48 40 34 30 39 34 307 45 37 31 27 44 36 31 27 35 30 278 42 34 28 25 41 33 28 24 32 28 249 40 31 26 22 39 31 26 22 30 25 2210 37 29 24 20 36 28 24 20 28 23 20

0°15° 15°90°0°

30°

60°

45°

90°

30°

60°

45°

90° 0°

796

597

398

199100




0 652 652 652 652 6525 646 636 638 645 646 3515 607 614 624 616 620 14825 578 581 575 570 565 24635 519 519 502 490 479 30745 445 439 418 399 392 32555 358 345 317 295 287 29965 253 239 205 183 172 23075 141 123 92 69 62 12985 36 23 18 18 17 4090 3 2 2 2 2


Horizontal Angles

Vertical Angle 0 45 9045 3611 2116 176855 3448 1666 131765 3113 1159 82875 2506 584 32385 1221 135 102



1 T8

PHOTOMETRIC CURVE

Test Lamp: 1xF32T8IES FILE: BBR-S-RG-4-T8-1

Efficiency: 60.7%

Ceiling 80 70 50

Wall 70 50 30 10 70 50 30 10 50 30 10

0 72 72 72 72 71 71 71 71 68 68 681 66 64 61 59 65 62 60 58 60 58 562 60 56 52 48 59 54 51 48 52 49 463 55 49 44 40 54 48 43 40 46 42 394 51 43 38 34 49 43 38 34 41 37 335 47 39 33 29 45 38 33 29 37 32 296 43 35 30 26 42 34 29 26 33 29 257 40 32 26 23 39 31 26 23 30 26 228 37 29 24 20 36 29 24 20 28 23 209 35 27 22 18 34 26 21 18 26 21 1810 33 25 20 17 32 24 20 16 24 19 16

0°15° 15°90°0°

30°

60°

45°

90°

30°

60°

45°

90° 0°

580

435

290

14572

PHOTOMETRIC DATA


DOS

LEDCIRCLES

DOS CIRCULAR DIRECT/ INDIRECT WHITE LED WITH OPAL ACRYL IC LENS

B U R B A N K ,

C A L I F O R N I A ,

9 1 5 0 5

W W W .

D E L R A Y

L I G H T I N G .

C O M SEPT

201

6

UDC2 – 2 ft., 4,400 lumens, 82WUDC3 – 3 ft., 6,600 lumens, 120WUDC4 – 4 ft., 8,600 lumens, 163WUDC5 – 5 ft., 10,800 lumens, 204W

STANDARD CANOPY• Mounts to all standard JBoxes.• Specify Separate (10” x 2.25”)

or Central (14” x 2.25”) mount. For remote driver installation, see p. 2.

CONSTRUCTION• Extruded aluminum outer

housing with direct white frosted acrylic diffuser. 8 ft. gray or white 22 AWG adjustable power cord and AC cables with push button grippers supplied standard. Specify XP for additional length (max. 25 ft.).

LED DRIVERS• Constant voltage, 100W/24V

universal for SQ–RGB DMX.• 60W/12V driver for single color

(Red or Blue) LEds.• Electronic drivers, DMX and

dimmer interface housed in canopy or remote gear box for easy access.

• Color LED options include red and blue, as well as RGB sequencing, controlled with a DMX 512 interface (BDMXMOD). Optional wall box control offered separately (see Traxon, back page.)

• Separate switching and dimming standard for UDC4 and UDC5 only. For UDC2 separate switching, specify SS.

• cUL listed for dry locations.

COLOR LEDs• Flexible 5050 universal voltage

LED tape light.• 24V for SQ–RGB sequencer;

12V for single color (Red or Blue) LEDs.

WHITE LEDs• Nichia Corp. NFSL757 linear

board chips.• White color temperatures

include W30 (3000K), W35 (3500K), and W40 (4000K).

• cUL listed for dry locations only.

TYPE :

ORDER NUMBER:

PROJECT:

Model# Finish LEDs Mount OptionUDC2–2 ft.UDC3–3 ft.UDC4–4 ft.UDC5–5 ft.

S–SilverW–WhiteK–Black

RedBlueSQ–RGBW30W35W40

S–SeparateSR–Separate RemoteCS–Central StandardCR–Central RemoteSCR–Sputnick CentralSREM–Separate EMCREM–Central EM

BDIM-W1BDIM-W2BDIM-W11BDMXMODSS

Example:

UDC5 S W40 SR BDIM-W2

S – Standard SR – Standard Remote

CS – Central Standard CR – Central Remote

SCR – Sputnick Central

2 ft.3 ft.4 ft.5 ft.

Cross Section

1.1”

2.2”

☐ BTRAXW–Traxon Light Drive* (enter quantity):☐ XP–Extra power cord (in inches; max. 25 ft.):☐ RBRD–red braided cord (in inches; max. 25 ft.):


F6

5 FT. LED

UDC5.W35

C P D I S T R I B U T I O N

C O E F F I C I E N T S

N O T E S

UDC5.W35204W LEDs, 3500ºKTotal lumens: 10,844

CRI: 92R9 ≥ 72

SEPT

201

6

% CEILING 80 (20% FLOOR)% WALL 70 50 300 119 119 1191 108 103 982 98 89 823 89 78 704 82 69 605 75 62 536 69 56 477 64 50 428 60 46 379 56 42 3410 52 39 31

60°

90°

120°

150° 180°

30°

470

470

939

939

1409

1409

1878

1878

Vertical plane thru Horiz. 0 – 180°Horiz. cone thru Vert. angle 85°

OPTIONS

• For white LEDs only.

BDIM-W1• 0–10V dimming to 10%.• Utilizes 100W/24V, 0–10V

120/277 constant voltage driver.• Use with 0–10V, purple/gray wire

analog dimmers; with low end trim pot, and adjust low end to above flicker threshold.

BDIM-W2• 0–10V dimming to 1%.• System utilizes 100W/24V,

120/277 constant voltage driver, with the Eldo LIN211D1-LN module.

• Required for use with digital architecture/networking systems like Acuity nLight, Eaton Greengate, and similar management systems.

BDIM-W11• Lutron LD3096W24U

dimming driver module.• 0.1% dimming and fade-to-off,

with Lutron dimming systems.• For remote driver install only.

D I M M I N G D R I V E R S

BDMXMOD• Osram part no. OTDMXRGB

supplied.• DMX control interface for

RGB LED.• Provides DMX control with

protocols that meet USITT DMX-512A or DMX512 (DIN 56930-2). No converter is required. DMX controls by others.

• A second 4-conductor control cable to fixture canopy is supplied.

TRAXON LIGHT-DRIVE RGB (order separately)

BTRAXW–white controller• Standalone, wall-mounted

(12V power supply included) DMX controller for RGB LED that provides direct access to fixtures.

• Tune color and brightness with the Light-Drive wheel.

• Two sequence modes enable continuous replay of all saved color settings, as well as a preset color-phase function, which can be adjusted in replay speed.

• Fully dimmable white mode button.

• See www.traxon-usa.com for details.

R G B O P T I O N S

Driver: OsramTotal Lumens: 10,844Input Voltage (VAC/60Hz): 120Input Power (W): 204Input Power Factor: >.95Efficacy: 53CRI: 92Correlated Color Temp (ºK): 3500

L M -7 9 – U C 5 . W 3 5

A C R Y L I C D I F F U S E R C L E A N I N G

Warning: Do not clean with ammonia based cleaners (e.g. Windex®). Use only water or cleaners specifically formulated for cleaning plastics.

CR – Central mount remote driver installation.

Driver must be accessible after installation. For suspended and hard lid ceilings with access panels. Canopy mounts to mud ring attached to J-box.

NOTE: Multiple drivers must be mounted no less than 4 inches apart side-by-side, and 1 inch apart end-to-end, to avoid overheating.

Standard pendant length: 8 ft. Specify XP for extra pendant. Maximum canopy to fixture distance: 25 ft. Maximum canopy to driver distance: 100 ft. (with 10 AWG wire).

SREM or CREM – Separate or Central Emergency. T-bar install shown, below.

Emergency battery pack provides 7W for 90 minutes. (12W also available.) Remote install only. Red driver light and test switch mounted in handy box installed at celing.

Remote Driver Canopy3.8 x 0.45 in.

REMOTE DRIVERS

SR – Separate mount driver installation.

A I R C R A F T C A B L E

Note: Aircraft cable suspension not recommended for outdoor use, where fixture will be exposed to water, or subject to wind oscillation. Avoid use near HVAC vents and in environments with corrosive chemical vapors, such as swimming pools.

Red braided power cord. Order RBRD.

R E D B R A I D E D C O R D

000000000000000

000000000000000 2.36”16”

2.36”16”

32”

2.36”

14-1/2”

7-5/8”5-3/4”

AlconLighting.com © 2015 2845 S. Robertson Blvd. Los Angeles, CA 90034 USA (877)733-5236 | [email protected]

12306 ESA Series 6 Inch LED

Cylinder Dow

nlight Light Fixture

Example: (12306-C-8-30-W-1)

Ordering Information:

Model

12306-C1

Cable Mount

12306-ST2

Stem Mount

12306-S3

Surface Mount

12306-W3

Wall Mount

Lumen Package

8 9W 850 Lumen

1 13W 1250 Lumen

2 21W 2000 Lumen

3 31W 3000 Lumen

4 41W 4000 Lumen

Finish

W White

B Black

Voltage

1 120V

2 277V

Color Temp.

27 2700K

30 3000K

35 3500K

40 4000K

FEATURES & SPECIFICATIONSINTENDED USEThe 12306 ESA Series 6 Inch LED Cylinder Light Fixture is the ideal solution for architectural LED cylinder down-light applications. Highly e�ective and e�cient lighting solutions for hotels, o�ces, retail outlets, restaurants, and more.

SIZEH 14-1/2” x Dia. 7-5/8“

ADDITIONAL FEATURES• Made of 0.040” steel body and cap; (3) screws on the bottom of cap secure cylinder body to cylinder cap• cUL Listed for Wet Location - Wall Mount Only• 850 Lumen Package - Triac Dimming comes standard; 1250 - 4000 Lumen Package - 0-10V Dimming comes standard • 60° Beam Spread• Ceramic LED package• Cree True White® Technology• Internal thermal protection• Life: 50,000 hours• CRI 90+• 120V or 277V

Listings:

8’ max 8’ max4-5/8”

5.5”

3-3/4”

Surface Mount

Wall Mount

Rod Mount

Cable Mount

1 Includes canopy and 84” of �eld cuttable 3 wire cable. 2 Includes canopy and 84” rod consisting of (3x) 12" pieces and (2x) 24" pieces of internally threaded rod. 3 Includes hardware to mount directly to J-box.

LED LUMEN, COLOR, AND CRITO MATCH F1 FIXTURE,NOTIFY ARCHITECT OF ANYDISCREPANCIES TO OBTAINCLARIFICATION.

F7

https://www.alconlighting.com/alcon-12306.html



FILE NAME:SLWSI-LED-B3-SL.SPEC December 24, 2015

Project:

Type:

Notes:

PROJECT INFORMATION

DIMENSIONS -SECTION VIEWS

PERFORMANCE/LINEAR FT AT 3000K AND 3500K (VL)

CONTROLSENSORS SurroundLiteTM

NOMINAL LUMEN OUTPUT INPUT WATTS EFFICACY

DISTRIBUTION UP DOWN

75up/25down at 1000 lm/ft 750 lm/ft 250 lm/ft 51 W 79 lm/W

75up/25down at 800 lm/ft 600 lm/ft 200 lm/ft 41 W 79 lm/W

REFER TO PHOTOMETRIC DATA SECTION FOR EXACT VALUES

WALLSEMI-INDIRECTSurroundLiteTMSLIM


ORDERING CODE

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

1 PRODUCT ID 2 VERSION 3 LIGHT ENGINE 4 NOMINAL LUMENS/FT 5 CRI 6 COLOR TEMPERATURESLWLED wall led B3 version 3 SL 75/25 surroundlite75%up/25%down 1000 1000 lm/ft 80 80 CRI 30 3000 K

800 800 lm/ft 90 90 CRI (1) 35 3500 K40 4000 K

Applies to both UP & DOWN. Applies to both UP & DOWN.Consult factory for other lumen packages

Applies to both UP & DOWN.(1) Please consult factory

Applies to both UP & DOWN.

7 SHIELDING 8 SHIELDING LENGTH 9 FIXTURE LENGTH (FT) 10 FINISH 11 VOLTAGE 12 DRIVERVL VL optic 4 4' 4 4’ AP aluminum paint 120 120 V D dimming (0-10V) standardPL flat-blade louvers 8 8' 8 8’ W white 277 277 V LT lutron (3)

SM smooth lens 12 12’ (2) C custom 347 347 V BI bi-level dimmingRE regressed S# System Run UNV universal O other (4)

(2) With 4ft shielding only Applies to both UP & DOWN. Applies to both UP & DOWN.(3) Specify system(4) Please consult factory

13 CIRCUITS 14 BATTERY 15 OTHER (OPTIONAL) 16 IC CONTROLS 17 CUSTOM1 1 circuit (5) B# battery pack F fuse DS# daylight sensor C custom2 2 circuits OS# occupancy sensor

2A/B 2 circuit alternating/4ft DOS# daylight & occupancy sensor+E(#) emergency section IN# Enlighted integral

+NL(#) night light section INR# Enlighted remote+GTD(#) generator transfer device

(5) Control UP & DOWN lights together Integral for minimum 8ft long fixture Requires 120V or 277V Applies to both UP & DOWN. Specify quantity. Requires 8" blank.See pages 5-6 for further details

Please specify

6 3/4”

2 3/8”7/8”

1 3/8"

5LED

BOARD & DRIVER

LUMINAIREWARRANTY

YEAR

shown with VL optic

shown with SO lens

shown with louver

shown regressed






SURROUNDLITE TECHNOLOGY

Slim with SurroundLite provides the flexibility of high efficacy spherical three dimensional wide batwing distributions and shielding options that all result in true lighting effectiveness. Slim is only 1.375” depth with integral driver and a light guide with proper cutoff and no view of bugs or dust particles.

An innovative technology to get much more out of LEDs: Axis SurroundLite is based on the fundamental physics of how lightinteracts with matter. The specially engineered lightguide is made of precisely coded and aligned molecules that shape LED output in all three dimensions.

With SurroundLite extra-wide, multidimensional light distribution, light is directed in all three planes and sent in every corner of the room. SurroundLite brings the promise of balanced brightness, facilitating lighting design.

SURROUNDLITE BENEFITS

Reduced 'Cave Effect', Increased Perceived Brightness Wide 3D batwing uplight distribution lights up corners. Lighting at seam between ceiling and wall. 3D light distribution from luminaire extremities lights up adjacent spaces and vertical planes.

No Streaks or Hot Spots of Light Axis SurroundLite technology spreads out light uniformly versus Lambertian distributions that put an intensity of light directly above and below the luminaire.

Better Facial Modeling / Facial Recognition Reflected light from illuminated surfaces within the space results in soft fill light on the vertical plane.

Use of Fewer Luminaires The 3D nature of light distribution is well suited to shorter run lengths and reducing the need for continuous rows.

Glare Mitigation Regressed lens, VL Optic, louvers and lenses yield lower luminance on the luminaire’s light-emitting area.






SLIM is also available as a pendant mount.

Specification sheets for pendant mount SLIM luminaires are available at www.axislighting.com

Row configuration and mounting spacing file is available for download at: www.axislighting.com

SLIM 4' 32"SLIM 8' 80"SLIM 12' 48"

Distance Between Mounting Points:

4' (32")8' (80")

12'

MOUNTING SPACING

OPTICS

VL VL optic PL flat blade louvers

SM smooth lens

RE regressed

SLIM 8ft (with 4' shielding)

97"

SYSTEMS (S#)

Runs of SLIM that are greater than 12ft in length are designated as systems (S#). This means that the run is comprised of a combination 4ft and/or 8ft sections to be assembled on site using our joining system. For more information on systems and joining, please refer to the SLIM installation sheets available at: www.axislighting.com under 'Downloads' tab.

WEIGHT

SLIM 4 ft 8 lbs / 3.6 kgSLIM 8 ft 16 lbs / 7.3 kgSLIM 12 ft 24 lbs / 10.9 kg

LENGTHS

1.13"

For all fixture lengths

49"6 3/4"

SLIM 8ft Continuous (with 8' shielding)

SLIM 12ft (with 4' shielding)

0.5"2.37"

0.87"

For all fixture lengths

SLIM 4ft (4)

6 3/4"

97"

6 3/4"

6 3/4"

145"

(48") (48")





APPROVALS

Certified to UL and CUL standards Suitable for damp locations.

FINISH

Aluminum paint, Powder Coated and custom finishes are also available.

LED UPGRADE / REPLACEMENT

All LED light engines used are field replaceable and upgradable to ensure the lighting system will last for years. Future-proof design comes with easy access to LED light engines from above using quick connectors (included in luminaire) and a screwdriver.

For more information on LED light engine upgrade and replacement, please refer to the SLIM LED Light Engine Replacement sheet available at: www.axislighting.comunder ‘Downloads’ tab.

LED Light Engine

CONSTRUCTION

Housing Extruded aluminum (0.075" nominal)

End Cap Die cast aluminum (0.10" nominal)

Joiners Die cast aluminum (0.10" nominal)

Interior Bracket Die formed zintec (22 gauge)

Top Covers Cold rolled sheet steel painted (24 gauge)

PMMA Precision formed microconical structure;92 percent transmission that cuts off glare above 55 degrees

Smooth Lens Uniform frosted acrylic lens

Flat blade louvers

Semispecular aluminum material (electronically anodized) for added visual comfort

LED SYSTEM

CRI Minimum 80 or 90 color rendering index

CCT Choice of 3000K, 3500K and 4000K color temperature with a great color consistency (within 3–step MacAdam ellipse). Both within fixture and fixture to fixture.

LED life Minimum 50,000h with 85% of lumen maintenance in 250C ambient temperature, in compliance with IES LM-80 testing measurements.

Thermal Management

Aluminum housing acting as the heat spreader to maximize life.

Environment Dry and damp rated in operating ambient temperatures of 0-400C (32-104F)

ELECTRICAL

Lutron driver L3D - Hi-Lume A-Series EcoSystem 3-Wire Control (1%)LDE1 - EcoSystem H-Series (1%)LDE5 - EcoSystem 5-Series (5%)LTE - Hi-Lume® A-series 2Wires Forward Phase (1%)

Other drivers DALI - Digital Addressable Lighting InterfaceDMX - Digital MultiplexELV - Electronic Low Voltage dimmingLV - line voltage - Advance Mark 10redwood - Building Intelligence PlatformXitanium SR - For wireless sensor

Emergency Integral emergency battery pack or emergency circuit optional.

Input Voltage 120V, 277V, 347V, UNV.





CONTROLSENSORS

EC-DIR-WH, FD-301Luxsense, Micro Luxsense

With daylight sensors, maximum lamp output is reduced according to the available amount of natural light. By reducing maximum lamp output, energy consumption is reduced by up to 20 percent in a process known as “Daylight Harvesting”.

DAYLIGHT HARVESTING (DS):

Shown with Luxsense

When a room is vacated, occupancy sensors ensure the light will be turned off after a programmed delay as well as ensuring that light remains on while the room is occupied.

OCCUPANCY (OS):

Shown with FS-205

FS-205, FS-355,FS-155 - Line VoltageFS-505, FS-505C

The integrated control systems offered are:

INSTALLATION EXAMPLES

Sensor location option

A combination of Daylight & Occupancy sensor from Philips, ACTILUME along with 0-10V or DALI ballasts can be used in one form factor.

DAYLIGHT HARVESTING AND OCCUPANCY (DOS):

Shown with Actilume DALI

Actilume 1-10VActilume DALI

INTEGRATED CONTROLS

SLIM luminaires allow the use of integrated controls such as daylight sensors (DS),occupancy sensors (OS) and combination daylight/occupancy sensors (DOS). These options canbe seamlessly integrated into our luminaires. The control system could be used to optimize thelighting of the space by reducing energy consumption through daylight harvesting and occupancy, thereby improving the overall interior environment and allowing for LEED credits.

● Consult factory for other options.

controlsoption

ENLIGHTED INTEGRAL (IN) / ENLIGHTED REMOTE (INR) :

A combination of Daylight , Occupancy & Temperature autonomously control illumination levels, monitoroccupancy and environmental conditions. Data is transmitted wirelessly to the Enlighted networked management system.





SENSORS BRAND Model TYPE

Daylight Sensor (DS)

Lutron EC-DIR-WH Daylight, IR

Wattstopper FD-301 DaylightPhilips Luxsense LRL1220/00 DaylightPhilips Micro Luxsense Daylight

Occupancy Sensor (OS)

Wattstopper FS-205v2 PIR Occupancy & Ambient light levelWattstopper FS-355 (need lenses) PIR Occupancy & Ambient light levelWattstopper FS-155 PIR Occupancy & Ambient light levelWattstopper FS-505 Ultrasonic Occupancy (Staircase)Wattstopper FS-505C Ultrasonic Occupancy (Open Area)

Daylight & Occupancy Sensors (DOS)

Philips Actilume, LR11655 Daylight & PIR Occupancy

Wattstopper FS-305 (need Lenses) PIR OccupancyWattstopper FS-305 RC PIR Occupancy & Ambient light levelLutron TriPak LRF2-DCRB-WH & LRF2-OCR2B-P-WH Daylight & PIR Occupancy

Enlighted sensor (IN, INR)

Enlighted integral / remote

SU-3E-00 Daylight, Occupancy & temperature


In the integrated Controls column, select the appropriate code: a. For Daylight sensors, select “DS” b. For Occupancy sensors, select “OS” c. For Daylight & Occupancy sensor, select “DOS”

Consult table below and select specifi c controls options for DS, OS or DOS controls.

HOW TO SPECIFY INTEGRATED CONTROLS

Write the code for the specifi c control after the sensor code. Example: DS-LD - for EC-DIR-WH Daylight sensor OS-WP1 - for FS-205 Occupancy sensor DOS-PA - for Actilume Daylight & Occupancy sensor

If you are not sure which sensor to select, you have two choices; a. Fill in just the general IC code. The factory will contact you and suggest a control option. b. Consult factory to make an informed decision.





Lumen/ft up: 602 lm/ft Lumen/ft down: 201 lm/ftTotal lumens: 3208 lm (for 4ft)Input Watts: 41 WEfficacy: 79 lm/W

CRI:80 shown (for CRI:90 use 0.8 multiplier on watts and efficacy)IES FILE: SLWLED-B3-SL-75-25-800-80-35-VL-4-4-W-120-D-1.IES


SLWLED-B3-SL-75/25-800-80-35-VL-4-4

75% up / 25% down at 800 lm/ft

VL LENS (VL)

PHOTOMETRIC CURVE

90°0°

180° 165°165° 145°145°

125°

105°

75°

35°35°

55°

15°15° 0°

90°

125°

105°

75°

55°

90°

270

538

538

809

809

1078

270

0


CRI:80 shown (for CRI:90 use 0.8 multiplier on watts and efficacy)IES FILE: SLWLED-B3-SL-75-25-1000-80-35-VL-4-4-W-120-D-1.IES


SLWLED-B3-SL-75/25-1000-80-35-VL-4-4

75% up / 25% down at 1000 lm/ft

VL LENS (VL)

PHOTOMETRIC CURVE

90°0°

180° 165°165° 145°145°

125°

105°

75°

35°35°

55°

15°15° 0°

90°

125°

105°

75°

55°

90°

337

674

674

1011

1011

1348

337

0


Horizontal Angles


45 5833 5619 428155 2787 2655 204565 1612 1522 138875 1243 1243 124385 651 1302 1302


Horizontal Angles


45 4666 4495 342555 2230 2124 163665 1289 1218 111075 994 994 99485 521 1042 1042


Horizontal Angles


0 201 201 201 201 2015 222 221 215 209 20315 301 294 271 244 22625 464 440 381 315 27435 711 657 549 436 35545 436 436 420 373 32055 169 165 161 150 12465 72 68 68 70 6275 34 32 34 37 3485 6 10 12 11 1290 0 0 0 0 095 211 187 153 121 110105 1062 891 612 422 336115 1348 1155 829 593 476125 1183 1039 795 605 505135 875 796 660 542 476145 648 611 543 480 443155 519 502 471 440 422165 445 439 427 415 409175 407 405 401 399 398180 396 396 396 396 396


Horizontal Angles


0 161 161 161 161 1615 178 177 172 167 16215 241 235 217 195 18125 371 352 305 252 21935 569 526 439 349 28445 349 349 336 298 25655 135 132 129 120 9965 58 54 54 56 5075 27 26 27 30 2785 5 8 10 9 1090 0 0 0 0 095 169 150 122 97 88105 850 713 490 338 269115 1078 924 663 474 381125 946 831 636 484 404135 700 637 528 434 381145 518 489 434 384 354155 415 402 377 352 338165 356 351 342 332 327175 326 324 321 319 318180 317 317 317 317 317

ZONAL LUMENS

Lumens

Zone

00-10 2010-20 6920-30 14730-40 26840-50 25650-60 12860-70 6870-80 3780-90 11

9090-100 147100-110 507110-120 653120-130 588130-140 443140-150 310150-160 206160-170 118170-180 38

180

ZONAL LUMENS

Lumens

Zone

00-10 1610-20 5520-30 11830-40 21440-50 20550-60 10260-70 5470-80 3080-90 9

9090-100 118100-110 405110-120 522120-130 471130-140 355140-150 248150-160 164160-170 95170-180 31

180


PHOTOMETRIC DATA

All IES files are available for download at: www.axislighting.com





CRI:80 shown (for CRI:90 use 0.8 multiplier on watts and efficacy)IES FILE: SLWLED-B3-SL-75-25-800-80-35-PL-4-4-W-120-D-1.IESTESTED ACCORDING TO IES LM-79-2008

SLWLED-B3-SL-75/25-800-80-35-PL-4-4


FLAT-BLADE LOUVER (PL)

PHOTOMETRIC CURVE

90°0°

180° 165°165° 145°145°

125°

105°

75°

35°35°

55°

15°15° 0°

90°

125°

105°

75°

55°

90°

266

532

532

798

798

1064

266

0


CRI:80 shown (for CRI:90 use 0.8 multiplier on watts and efficacy)IES FILE: SLWLED-B3-SL-75-25-1000-80-35-PL-4-4-W-120-D-1.IES


SLWLED-B3-SL-75/25-1000-80-35-PL-4-4

75% up / 25% down at 1000 lm/ft

FLAT-BLADE LOUVER (PL)

PHOTOMETRIC CURVE

90°0°

180° 165°165° 145°145°

125°

105°

75°

35°35°

55°

15°15° 0°

90°

125°

105°

75°

55°

90°

333

665

665

998

998

1330

333

0


Horizontal Angles


45 7880 5443 324055 11639 7232 406665 13477 7544 419975 3349 4066 291085 118 355 829


Horizontal Angles


45 6304 4354 259255 9311 5785 325365 10782 6035 336075 2679 3253 232885 95 284 663


Horizontal Angles


0 136 136 136 136 1365 143 143 141 138 13715 185 180 166 152 14525 274 256 217 181 16335 405 363 294 228 19145 540 471 373 279 22255 647 532 402 297 22665 552 423 309 228 17275 84 86 102 94 7385 1 1 3 8 790 0 0 0 0 095 166 172 148 122 111105 1044 874 596 408 322115 1330 1128 795 556 439125 1147 996 741 546 443135 817 734 587 465 397145 574 536 464 395 358155 440 423 388 356 339165 369 363 350 339 333175 340 338 335 332 331180 332 332 332 332 332


Horizontal Angles


0 109 109 109 109 1095 114 114 113 110 11015 148 144 133 122 11625 219 205 174 145 13035 324 290 235 182 15345 432 377 298 223 17855 518 426 322 238 18165 442 338 247 182 13875 67 69 82 75 5885 1 1 2 6 690 0 0 0 0 095 133 138 118 98 89105 835 699 477 326 258115 1064 902 636 445 351125 918 797 593 437 354135 654 587 470 372 318145 459 429 371 316 286155 352 338 310 285 271165 295 290 280 271 266175 272 270 268 266 265180 266 266 266 266 266

ZONAL LUMENS

Lumens

Zone

00-10 1410-20 4720-30 9830-40 16940-50 23750-60 27660-70 22970-80 7880-90 6

9090-100 147100-110 493110-120 618120-130 536130-140 383140-150 257150-160 168160-170 97170-180 32

180

ZONAL LUMENS

Lumens

Zone

00-10 1110-20 3820-30 7830-40 13540-50 19050-60 22160-70 18370-80 6280-90 4

9090-100 117100-110 394110-120 494120-130 429130-140 307140-150 206150-160 134160-170 77170-180 25

180


PHOTOMETRIC DATA






CRI:80 shown (for CRI:90 use 0.8 multiplier on watts and efficacy)IES FILE: SLWLED-B3-SL-75-25-800-80-35-SM-4-4-W-120-D-1.IES


SLWLED-B3-SL-75/25-800-80-35-SM-4-4


SMOOTH LENS (SM)

PHOTOMETRIC CURVE

90°0°

180° 165°165° 145°145°

125°

105°

75°

35°35°

55°

15°15° 0°

90°

125°

105°

75°

55°

90°

268

537

537

805

805

1074

268

0


CRI:80 shown (for CRI:90 use 0.8 multiplier on watts and efficacy)IES FILE: SLWLED-B3-SL-75-25-1000-80-35-SM-4-4-W-120-D-1.IES


SLWLED-B3-SL-75/25-1000-80-35-SM-4-4

75% up / 25% down at 1000 lm/ft

SMOOTH LENS (SM)

PHOTOMETRIC CURVE

90°0°

180° 165°165° 145°145°

125°

105°

75°

35°35°

55°

15°15° 0°

90°

125°

105°

75°

55°

90°

336

671

671

1007

1007

1324

336

0


Horizontal Angles


45 4013 3679 310455 3925 3562 301865 3671 3358 279875 3143 2924 237685 1845 1737 1194


Horizontal Angles


45 3211 2943 248355 3140 2850 241565 2937 2686 223875 2515 2339 190185 1476 1389 955


Horizontal Angles


0 314 314 314 314 3145 329 328 324 318 31315 353 350 339 324 30925 363 356 341 317 29735 343 336 320 295 27245 300 292 275 253 23255 238 231 216 199 18365 164 159 150 137 12575 86 84 80 72 6585 17 17 16 14 1190 0 0 0 0 095 213 192 155 122 110105 1060 889 610 419 334115 1342 1147 820 584 470125 1174 1031 783 593 496135 866 788 648 529 466145 639 603 533 468 434155 510 493 459 429 414165 437 430 419 408 403175 407 406 401 399 399180 399 399 399 399 399


Horizontal Angles


0 251 251 251 251 2515 263 262 259 254 25015 282 280 271 259 24725 290 285 273 254 23835 274 269 256 236 21845 240 234 220 202 18655 190 185 173 159 14665 131 127 120 110 10075 69 67 64 58 5285 14 14 13 11 990 0 0 0 0 095 170 154 124 98 88105 848 711 488 335 267115 1074 918 656 467 376125 939 825 626 474 397135 693 630 518 423 373145 511 482 426 374 347155 408 394 367 343 331165 350 344 335 326 322175 326 325 321 319 319180 319 319 319 319 319

ZONAL LUMENS

Lumens

Zone

00-10 3010-20 8920-30 14030-40 17540-50 18650-60 16960-70 12970-80 7380-90 16

9090-100 149100-110 505110-120 647120-130 581130-140 436140-150 305150-160 202160-170 117170-180 38

180

ZONAL LUMENS

Lumens

Zone

00-10 2410-20 7120-30 11230-40 14040-50 14850-60 13660-70 10470-80 5880-90 13

9090-100 119100-110 404110-120 517120-130 465130-140 349140-150 244150-160 162160-170 93170-180 31

180


PHOTOMETRIC DATA






CRI:80 shown (for CRI:90 use 0.8 multiplier on watts and efficacy)IES FILE: SLWLED-B3-SL-75-25-800-80-35-RE-4-4-W-120-D-1.IESTESTED ACCORDING TO IES LM-79-2008

SLWLED-B3-SL-75/25-800-80-35-RE-4-4


REGRESSED (RE)

PHOTOMETRIC CURVE

90°0°

180° 165°165° 145°145°

125°

105°

75°

35°35°

55°

15°15° 0°

90°

125°

105°

75°

55°

90°

283

566

566

849

849

1132

283

0


CRI:80 shown (for CRI:90 use 0.8 multiplier on watts and efficacy)IES FILE: SLWLED-B3-SL-75-25-1000-80-35-RE-4-4-W-120-D-1.IES


SLWLED-B3-SL-75/25-1000-80-35-RE-4-4

75% up / 25% down at 1000 lm/ft

REGRESSED (RE)

PHOTOMETRIC CURVE

90°0°

180° 165°165° 145°145°

125°

105°

75°

35°35°

55°

15°15° 0°

90°

125°

105°

75°

55°

90°

354

708

1063

1063

1417

1417

354

0


Horizontal Angles


45 5649 4675 299755 4008 3417 245765 2382 2256 198175 737 1269 163785 365 243 1094


Horizontal Angles


45 4514 3736 239555 3203 2731 196365 1903 1803 158375 589 1014 130885 291 194 874


Horizontal Angles


0 226 226 226 226 2265 264 260 251 240 22715 381 370 336 291 25025 507 486 426 346 27635 536 512 444 354 27345 422 405 349 289 22455 243 235 207 180 14965 106 108 101 95 8875 20 26 35 41 4585 3 2 2 1 1090 0 0 0 0 095 168 168 151 123 111105 1068 902 624 431 337115 1413 1214 869 614 483125 1284 1129 855 634 519135 967 876 712 570 495145 702 661 577 501 459155 542 523 486 450 433165 452 446 432 422 417175 416 414 411 410 409180 409 409 409 409 409


Horizontal Angles


0 181 181 181 181 1815 211 208 200 192 18215 304 295 269 233 20025 405 388 340 277 22035 429 409 354 283 21845 337 324 279 231 17955 194 188 166 144 11965 85 86 81 76 7175 16 21 28 33 3685 3 2 2 1 890 0 0 0 0 095 134 134 121 98 89105 854 720 499 345 269115 1129 970 695 490 386125 1026 902 683 507 414135 772 700 569 456 396145 561 528 461 400 367155 433 418 388 360 346165 362 356 345 337 333175 332 331 328 328 327180 327 327 327 327 327

ZONAL LUMENS

Lumens

Zone

00-10 2310-20 7820-30 14830-40 20340-50 20150-60 14760-70 8570-80 3480-90 5

9090-100 148100-110 505110-120 660120-130 609130-140 466140-150 328150-160 214160-170 121170-180 39

180

ZONAL LUMENS

Lumens

Zone

00-10 1810-20 6220-30 11930-40 16340-50 16150-60 11760-70 6870-80 2780-90 4

9090-100 118100-110 403110-120 528120-130 486130-140 373140-150 262150-160 171160-170 97170-180 31

180


PHOTOMETRIC DATA


led (2x2 or 2x4) l2d series...nulite lighting 10770 east 51st avenue, denver, co 80239 phone...

Documents