led curing lightmultimedia.3m.com/mws/media/581565o/elipar-s10-brochure-for... · curing light from...
TRANSCRIPT
brilliance
3M, ESPE and Elipar are trademarks of 3M or 3M ESPE AG. Bluephase, Coltolux, Demi, G-Light, L.E.Demetron II, Radii-Cal, SmartLite, Starlight Pro and Translux Power Blue are not trademarks of 3M.
Ordering Information Item # Product Information 76953 1 Elipar S10 LED Curing Light
Accessories 76958 1 Elipar S10 Light Guide, 10 mm
76957 1 Elipar S10 Eye Shield
76956 1 Elipar S10 Li-ion Rechargeable Battery
Elipar™ S10LED Curing Light
3M ESPE Dental Products
ABN: 90 000 100 006950 Pacific Highway, PymbleNSW 2073 AustraliaCustomer Service: 1300 363 454Internet: www.3MESPE.com.au Please recycle. Printed in Australia.
© 3M 2009. All rights reserved.
Charging base station with built-in light meter and battery charge indicator.
Experience a touch of
Elipar™ S10 LED Curing Light Technical DataUtilizable wavelength range 430-480 nm
Light intensity 1200 mW/cm2 ± 10% (independent of battery power level)
Power supply Lithium-ion battery 60 minutes cure time from new fully-charged battery (approx. 360 10-sec. cures) Recharging drained battery: approx. 90 minutes Easy tool-free battery exchange
Continuous runtime Typically 7 minutes at room temperature of 23°C (73°F)
Timer settings 5, 10, 15, 20 seconds, continuous mode (120 sec.) and tack-cure mode
Like no other … inside and out.Virtually unbreakable and sealed against contamination. When you hold the seamless, stainless steel Elipar™ S10 LED
Curing Light from 3M ESPE, you can feel quality that is beyond
comparison. Its one-piece stainless steel casing is virtually
unbreakable. And because the casing has no seams or vents
where liquid can seep in, internal components are protected
from contaminants, as well as damage from fluids.
Assurance of a complete cure in challenging situations.The Elipar S10 light is designed to give you confidence during any curing procedure with:
• 1200 mW/cm2 intensity
• Up to 50% more optical power*
• Up to 80% more curing surface*
• Up to three times more intensity at the clinically relevant distance of 7 mm*
And, with such high intensity, it allows a fast cure of compatible materials in half the
manufacturer’s recommended cure time. It even allows a 5-second cure on tested
composites shade A3 and lighter.1
The wider 10 mm light guide illuminates up to 80% more curing surface* for time-saving, one-shot curing.
The beam from the Elipar™ S10 LED Curing Light has a smaller angle of beam spread, resulting in a higher maintained intensity at a distance. Source: 3M ESPE internal data
Unique, multiple-setting light timer offers preset cure times of 5, 10, 15, 20 and 120 seconds, plus a unique tack-cure mode that allows an easier and more predictable removal of excess cement.
Cordless portability with 60 minutes of curing time from a new fully-charged, long-life Li-ion battery— approximately 360 10-second cures.
Unique, ergonomic V-shape provides a comfortable grip that best fits your technique.
Measured with a spectrally resolving radiometer equipped with an integrating sphere (aperture 4 mm). Source: 3M internal data
0
Inte
nsity
at 7
mm
(mW
/cm
2 )
100
200
300
400
500
600
700
800
Elip
ar™
S10
LE
D Cu
ring
Ligh
t
Dem
i
blue
phas
e (G
1)
L.E.
Dem
etro
n II
Smar
tLite
PS
Radi
i-Cal
Colto
lux
LED
Star
light
Pro
G-Li
ght
Tran
slux
Po
wer
Blu
e
Elip
ar™
Fre
eLig
ht 2
Hygiene control on a whole new level.Like other dental hand instruments, the curing light comes
in direct contact with your patients, so hygiene is of upmost
importance. That’s why stainless steel makes perfect sense.
The smooth, vent-free, stainless steel exterior allows fast and
easy disinfection between patients. The stainless steel surface
is also resistant to discoloration and staining from disinfectants
and dental materials.
The optics of the Elipar S10 light are optimized to deliver a more focused light output.
For maximum efficiency, Elipar S10 offers all the features you want
Unique magnetic light guide mount for quick and easy attachment, removal and positioning of the light guide.
The 10 mm light guide rotates 360° for easy alignment of light tip to restoration.
Simple, intuitive, two-button operation with one cure mode for all indications.
The more focused light output produces up to 3 times more intensity at a clinically-relevant distance of 7 mm. The result is a significantly improved depth of cure.*
*Compared to leading devices tested. 1 List of tested materials is available. Only if light guide can be placed in close
proximity to increment, at 100% intensity output.
Illustration of a clinical situation: curing of a large Class II cavity.
Redefining strength, durability and hygiene. Confidence during any curing procedure.
Large 10 mm tip ~ 0.61 cm2
Common 8 mm tip ~ 0.40 cm2
Summary of advantages
• One-piece stainless steel casing is extraordinarily robust and easy to disinfect
• Unique, ergonomic V-shape provides a comfortable grip from any angle
• One-shot cure with up to 50% more optical power; and up to 80% more illumination surface
• Faster, deeper cure
• Simple two-button operation with one cure mode for all indications
• Silent operation—innovative design eliminates noisy fan, and includes option to turn off beep signals