led licence plate light available in 12 v and 24 v ......comparison of capacity between fi lament...
TRANSCRIPT
LED licence plate light
LED licence plate light available in 12 V and 24 V versions Flush-mounting or surface-mounting models available Long service life with low power consumption
Surface-mounting variant - only one light per licence plate The classic surface-mounting variant for trailer applications is possible by using a housing. Thanks to the optimum light output, only one light is required at the side of each licence plate (520 mm).
Flush-mounting variantThanks to the attractive low-profi le design, this light can always be fl ush-mounting easily above the licence plate. 2 LED licence plate lights are required for the even illumination of the licence plate.
Power LEDs with long service lifeOptimum light output is provided by 4 Power LEDs and precision lenses. With a service life greater than 30,000 hours, replacement is not necessary during vehicle service life.
Extremely low energy consumptionBy using Power LEDs energy consumption is low but light ouput is signifi cantly improved.
High dust and water resistanceThe high protective rating IP 6K9K is guaranteed through the high quality, precision castings.
12 V and 24 V versionWidespread use in a multitude of vehicles is possible thanks to the availability of both 12 V and 24 V versions.
Replacement possibilityHella's tried-and-trusted licence plate light with fi lament bulb 2KA 005 049 can be replaced with the aid of the new LED fl ush-mounting variant.
Product features
BriefInformation
Rea
r lig
htin
g
Ideas today forthe cars of tomorrow
LED lighting technology
As a leader in innovation in the fi eld of automotive original equipment, Hella sets standards in single and multi-function lights through LED lighting technology.
Here is an overview of the advantages of modern LED lighting technology:
Extremely low energy consumptionThrough the combination of effi cient light-emitting diodes (LEDs) and precision optics, our lights achieve the legally prescribed light distribution – and do so with 90 % less power in comparison with bulb-based lights!
No light-source replacement, no maintenance and an extremely long service life.LEDs are semi-conductor components, which means they do not have a fragile fi lament. In addition, LEDs are absolutely resistant to impact and vibration. This guarantees lighting and safety in every situation. Furthermore, the service life of LEDs is about 30,000 operating hours, depending on the ambient temperatures, and thus exceeds the overall vehicle mileage performance.
Comparison of capacity between fi lament bulb light and LED light
Power consumption savings90%
Filament bulb light LED light
5 W 5 W
10 W overall
1 W total
Application example and illumination comparison
Example:Side licence plate lighting for 520 x 120 mm licence plate.
2 lights are requiredper licence plate
Only 1 light is required per licence plate
Conventionalillumination
LEDillumination
Technical details
Technical data
Type approval ECE E1 2609CE tested
Approval GGVS/ADR
Functions Licence plate light
LED 4 Power Top LEDs
Current consumption 1 W
Specifi cation Hella Norm 7.2 Agro plus
Dimensions Surface-mounting variant93 x 63 x 66 mm
Flush-mounting variant83 x 33 x 24 mm
Operating temperature -40 °C to + 50 °C
IP protective class IP 6K9K
Connection 6.3 mm blade terminalindependent of polarity(+ and - can be interchanged)
Service life 30,000 h*
(* depending on the ambient temperature)
Technical drawing
Installing the fl ush-mounting version
For mounting above a licence plate of the size 520 x 120 mm, 2 lamps are required.
Installing the surface-mounting version
For mounting to the left or right of a licence plate of the size 520 x 120 mm, only 1 light is required.
Surface-mounted version Flush-mounting version
Body
Mounting space 520 x 120 mm for licence plate
E16 total
Mid
of l
icen
ce p
late
ECE licence plate 120 x 520 mm
Ideas today forthe cars of tomorrow
Range overview
* 2 lights of the fl ush-mounting variant are required above each licence plate 520 x 120 mm** 1 light of the surface-mounting version required to the right and left of the licence plate 520 x 120 mm *** Approval in the case of suffi cient demand fi gures
OutlookExpansion of the application through new versions: approval of the surface-mounting and fl ush-mounting variant
One surface-mounting variant at the side or one fl ush-mounting variant above the licence plate.
One surface-mounting variant at the side or one fl ush-mounting variant above the licence plate.
One surface-mounting variant at the side or two fl ush-mounting variants above the licence plate (with CCC-certifi cation for China possible on request).
© H
ella
KG
aA H
ueck
& C
o., L
ipps
tadt
9Z
2 99
9 12
7-81
4 T
T/05
.09/
0.2
Prin
ted
in G
erm
any
Product picture Part number Specifi cation Installation
2KA 010 278-311 / -317with frame,
connection 6.3 x 0.8blade sliders
Flush-mounting* 1 196 12 V 1 W 0.08 A
2KA 010 278-011 / -017with frame,
connection 6.3 x 0.8blade sliders
Flush-mounting* 1 196 24 V 1 W 0.04 A
2KA 010 278-321 / -327with housing,
connection 6.3 x 0.8blade sliders
Surface-mounting** 1 84 12 V 1 W 0.08 A
2KA 010 278-021 / -027with housing,
connection 6.3 x 0.8blade sliders
Surface-mounting** 1 84 24 V 1 W 0.04 A
2KA 010 278-031 / -037
Potted housing, with 2-pole cable, 2,000 mm, 6.3 x 0.8 blade
sliders
Surface-mounting** 1 *** 24 V 1 W 0.04 A
340 x 240 mm 400 x 220 mm280 x 200 mm
Po
wer
co
nsum
pti
on
Volt
Wat
t
-..1 -..7
Packaging size
Tel.: +49 2941 38-0Fax: +49 2941 38-7133www.hella.com
Hella KGaA Hueck & Co.Rixbecker Straße 7559552 Lippstadt/Germany