led panel installation guide ceiling mount frame
TRANSCRIPT
www.sgslight.com | [email protected]
CEILING MOUNTED FRAMEFor TLP-X/F/M/A/E Series
Risk of Fire. Do not install insulation within 3 inches (76 mm) of luminaire top.Risques d’incendie. Ne pas installer d’isolation à moins de 76 mm (3 pouces)au-dessus du luminaire.
Do not perforate the integrity of the luminaire. Only screw into the threaded mounting bracket holes located at the four corners of the fixture.
Environmental Operating Temperature RangeEnvironmental RatingEnvironmental Storage Temperature Range
-10°C to +40°C
-40°C to +60°C
Refer to for more lamp electronical data info.
WARNING/AVERTISSEMEN
CAUTION
TLP Series LED Panel Specification
Dry location rated
IN
www.sgslight.com | [email protected]
CEILING MOUNTED FRAME KITS
TLP- CL3030 TLP-CL3060
TLP- CL6060 TLP- CL6262
TLP- CL3012
TLP- CL6012
TLP- CL3030 TLP-CL3060
TLP- CL6060 TLP- CL6262
TLP- CL3012
TLP- CL6012
Frame A
Frame B
X 2 X 2
X 2 X 2
X 8 X 8
X 4 X 6
Fix the two ‘A’ frames together with one ‘B’ frame.
Slide the LED Panel in to the frame.
Identify the two frame types as illustrated above (Type A and B).
1 2
Frame B
Frame A
Frame A
1
Mount the frame to the ceiling.3 4
Ceiling
Frame A Frame B
Items Items
TLP-FDJ2
INSTALLATION STEPS
www.sgslight.com | [email protected]
Insert the other ‘B’ frame on to the ends of the ‘A’ frames.
5 Fix the ‘B’ frame with the screws supplied.
Frame B
AC100-240V4
6
AC100-240V4