LEGAL INFORMATIONCopyright © 2016 ZTE CORPORATION.All rights reserved.No part of this publication may be quoted, re-produced, translated or used in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation.ZTE Corporation reserves the right to make modifications on print errors or update specifi-cations in this guide without prior notice.

NoticeWe offer self-service for our smart terminal de-vice users. Please visit the ZTE official website (at www.ztedevice.com) for more information on self-service and supported product models. Information on the website takes precedence.

DisclaimerZTE Corporation expressly disclaims any liabil-ity for faults and damages caused by unauthor-ized modifications of the software.Images and screenshots used in this guide may differ from the actual product. Content in this guide may differ from the actual product or soft-ware.

TrademarksZTE and the ZTE logos are trademarks of ZTE Corporation. Google and Android are trade-marks of Google, Inc. The Bluetooth® trademark and logos are owned by the Bluetooth SIG, Inc. and any use of such trademarks by ZTE Corpo-ration is under license.

microSDHC Logo is a trademark of SD-

3C, LLC.Other trademarks and trade names are the property of their respective owners.

Product Safety InformationDon’t make or receive phone calls while driving. Never text while driv-ing.

For body-worn operations, maintain a separation of 5 mm.

Small parts may cause choking.

Your phone can produce a loud sound.

To prevent possible hearing dam-age, do not listen at high volume levels for long periods.

Avoid contact with anything mag-netic.

Keep away from pacemakers and other electronic medical devices.

Turn off when asked to in hospitals and medical facilities.

Turn off when told to on aircraft and at airport.

Turn off when near explosive materi-als or liquids.

Don’t use at gas stations.

Your phone may produce a bright or flashing light.

Don’t dispose of your phone in fire.

Avoid extreme temperatures.

Avoid contact with liquids. Keep your phone dry.

Do not attempt to disassemble your phone.

Only use approved accessories.

Don’t rely on your phone as a pri-mary device for emergency commu-nications.

Getting to Know Your PhoneAuxiliary microphoneProximity & Light sensor

Earpiece

Power key

Menu keyBack key

Touch screen

Volume key

nano-SIM/microSDHC

card tray

Front camera

3.5mm Headset jack

Home key

2. Pull out the card tray and place the nano-SIM card or microSDHC card on the tray, as shown. Then carefully install the tray back.

CAUTION:

To avoid damage to the phone, please do not use other kinds of nano-SIM cards, and do not use a non-standard nano-SIM card cut from a (U)SIM card. You can get the standard nano-SIM card from your service provider.

Charging the BatteryYour phone’s battery should have enough pow-er for the phone to turn on, find a signal, and make a few calls. You should fully charge the battery as soon as possible.

WARNING!

Use only ZTE-approved chargers and cables. The use of unapproved accessories could dam-age your phone or cause the battery to explode.

SpeakerCharging / USB

Type-C jack

Main microphone

FlashBack camera

Before Getting StartedInstalling the nano-SIM / microSDHC CardPower off your phone before installing or re-moving the nano-SIM or microSDHC card. 1. Insert the tip of the tray eject tool into the

hole on the card tray.Fingerprint sensor

The battery is not removable and do not re-move the rear cover please.

Press and hold the Power key for about 10 seconds to force the mobile phone restart.

Radio Frequency (RF) Exposure

General Statement on RF EnergyYour phone contains a transmitter and a re-ceiver. When it is ON, it receives and transmits RF energy. When you communicate with your phone, the system handling your call controls the power level at which your phone transmits.

Specific Absorption Rate (SAR)Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientific organi-zation ICNIRP and include safety margins de-signed to assure the protection of all persons, regardless of age and health.The guidelines use a unit of measurement known as Specific Absorption Rate, or SAR. The SAR limit for mobile devices is 2 W/kg and the highest SAR value for this device when tested at the head was 0.248 W/kg*, and when tested at the body was 0.958 W/kg*. As mobile devices offer a range of functions, they can be used in other positions, such as on the body as described in this user guide**.

As SAR is measured utilizing the device’s highest transmitting power, the actual SAR of this device while operating is typically below that indicated above. This is due to automatic changes to the power level of the device to en-sure it only uses the minimum power required to communicate with the network.* The tests are carried out in accordance with EN 50360, EN 62209-1, EN 62209-2.** Please see body worn operation.

Body Worn OperationImportant safety information regarding radio frequency radiation (RF) exposure:To ensure compliance with RF exposure guidelines the phone must be used with a minimum of 5 mm separation from the body.Failure to observe these instructions could re-sult in your RF exposure exceeding the relevant guideline limits.

Limiting Exposure to Radio Frequen-cy (RF) FieldsFor individuals concerned about limiting their exposure to RF fields, the World Health Organi-zation (WHO) provides the following advice:Precautionary measures: Present scientific information does not indicate the need for any special precautions for the use of mobile phones. If individuals are concerned, they might choose to limit their own or their children’s RF exposure by limiting the length of calls, or us-ing ‘hands-free’ devices to keep mobile phones away from the head and body.

Further information on this subject can be ob-tained from the WHO home page http://www.who.int/peh-emf (WHO Fact sheet 193: June 2000).

Regulatory InformationThe following approvals and notices apply in specific regions as noted.Please find the section Declaration of RoHS Compliance and CE DOC in the end of this manual.

DECLARATION OF CONFORMITY

It is hereby declared that following designated product:

Product Type: LTE/WCDMA/GSM(GPRS) Multi-Mode Digital Mobile Phone

Model No: ZTE BLADE V7 MAX/ZTE BLADE V0710

Product Description: LTE/WCDMA/GSM(GPRS) Multi-Mode Digital Mobile Phone

Complies with the essential protection requirements of Directives on Radio and Telecommunication Terminal Equipment (Directive 1999/5/EC) and the amendments.This declaration applies to all specimens manufactured identical to the samples submitted for testing/evaluation.

Assessment of compliance of the product with the requirements relating to Directive 1999/5/EC was performed by PHOENIX TESTLAB GmbH (Notified Body No.0700),was based on the following regulations and standards:Requirement Standard Report No.

Health and safety

EN 62209-1:2006EN 62209-2:2010EN 50360:2001/A1:2012EN 50566:2013/AC:2014EN 62479:2010

SET2016-10722

EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 EN 50332-1-2000EN 50332-2-2003

SET2016-09853 SET2016-10301

EMC

EN 301 489-1 V1.9.2:2011EN 301 489-7 V1.3.1: 2005EN 301 489-3 V1.6.1;2012EN 301 489-17 V V2.2.1 :2012EN 301 489-24V1.5.1:2010

SET2016-10703

Radio Spectrum

EN 301 511 V9.0.2EN 301 908-1 V7.1.1EN 301 908-2 V6.2.1EN 301 908-13 V6.2.1EN 300 328 V1.9.1EN 300 440-1 V1.6.1EN 300 440-2 V1.4.1

SET2016-09712 SET2016-09713 SET2016-09714 SET2016-10300 SET2016-10302

This declaration is the responsibility of the manufacturer:

ZTE Corporation

ZTE Plaza, Keji Road South, Hi-Tech, Industrial Park, Nanshan District,Shenzhen, Guangdong, 518057, P.R.China

Authorized person signing for the company:

Yao Cuifeng Chief Quality Officer of ZTE Corporation

Name in block letters & position in the company

Shenzhen, 8th July 2016

Place & date Legally valid signature

CAUTION:

Do not change the built-in rechargeable battery in your phone by yourself. The battery can only be changed by ZTE or ZTE authorised service provider.1. Connect the adapter to the charging jack.

Ensure that the adapter is inserted in the correct direction.

2. Connect the charger to a standard AC pow-er outlet.

3. Disconnect the charger when the battery is fully charged.

NOTES: If the battery is extremely low, you may be

unable to power on the phone even when it is being charged. In this case, try again after charging the phone for at least 30 minutes. Contact customer service if you still cannot power on the phone after prolonged charg-ing.