legend series - gardner denver

12
Legend ® Series Positive Displacement Blowers & Vacuum Pumps

Upload: others

Post on 16-Oct-2021

18 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Legend Series - Gardner Denver

Legend® SeriesPositive Displacement Blowers & Vacuum Pumps

Page 2: Legend Series - Gardner Denver

2

Sutorbilt Legend Series

Setting the Industry StandardThe Gardner Denver Sutorbilt® Legend® line of rotary positive displacement lobe blowers and vacuum pumps are the result of more than 150 years experience in the design, manufacture and support of superior industrial equipment.

• Available in 20 sizes with 4 different configurations

• The Legend Series delivers

– Pressure to 15 psig– Vacuum to 16” Hg– Flows to 3,015 cfm

Why the Sutorbilt line of blowers and vacuum pumps earned the name “Legend”• Backed by the most experienced and trusted distributor network

in the industry

• Every Sutorbilt Legend blower/vacuum pump is built under rigid ISO 9001:2000 quality standards

• Each Legend is individually tested to meet rigorous performance specifications

• Requested by leading Original Equipment Manufacturers (OEMs) worldwide for a wide range of applications, due to the ability to customize the Legend to their specifications while meeting strict performance requirements

• A Legend is at the heart of an ever-expanding variety of air solutions working every minute of every day around the globe

• Dual Splash Lubricated and Quiet Series (for up to 5 dBA reduction) are available

Page 3: Legend Series - Gardner Denver

3

Proven Performance. Global Applications. Local Support.

Quiet Operation

The sound data shown below compares the Legend (red) and a comparably sized blower (green) operating at 3,275 rpm and 12 psig.

• Improved blower design reduces the sound pressure output of the Legend blower

• Typical reduction is 3 dBA which represents 50% less noise than the competition

Superior Local Sales and Service

• Extensive network of authorized Gardner Denver/Sutorbilt distributors

• Offers the most convenient local sales and service support in the industry

• Factory trained professionals are experts in blower/vacuum pump technology

• Providing system installation guidance, troubleshooting and optimization recommendations for new or existing applications

Even a “Legendary” Warranty

Every Sutorbilt Legend Series blower/vacuum pump is covered by a “Legendary” warranty:

• 24 months from the date of shipment or

• 18 months from the date of installation, whichever occurs first

Industry ApplicationAquaculture Aeration

Cement & Lime Fluidization & Conveying

Chemical Vacuum Processing & Conveying

Coal Bed/Landfill Methane Gas Recovery

Dairy Automated Milking

Dry Bulk Hauling Trailer Unloading & Aeration

Environmental Services

Sewer Cleaning & Portable Restroom Services

Industrial Material Vacuuming

Milling & Baking Blending & Conveying

Oil & Gas Gas Collection & Sparging

Power Generation Fly Ash Conveying & Aeration

Process Gas Gas Boosting

Pulp & Paper Chip Conveying & Process Vacuum

Resin & Plastic Processing & Conveying

Soil Remediation Vacuum Extraction & Sparging

Vacuum Excavation Potholing & Slurry Recovery

Wastewater Aeration & Backwashing

The above table illustrates industries which depend upon the Sutorbilt® Legend® to deliver clean, oil-free air to a wide range of global applications.

100

90

80

70

60

50

SUTORBILT LEGEND

NO

ISE

LEVE

L (d

Ba)

COMPARABLE UNIT

FREQUENCY (Hz)

63 125 250 500 1000 2000 4000 8000

Page 4: Legend Series - Gardner Denver

4

Legendary Design Features

1 High-strength impeller case is heavily ribbed and machined from a single piece of cast iron and features oversized dowel pins for precise mounting and alignment of head plates

• Results in reduced noise and more stable, vibration-free operation

2 Head plates, machined from cast iron, are ground on the interior surface to precise operating tolerances. Bearing fits are machined into head plates to assure exact bearing positioning

• Ensures accurate, fixed-dimension clearances through all blower operating conditions and temperature ranges

3 Impellers are machined from cast iron to an exact profile and are permanently fastened to steel shafts. They are dynamically balanced for smooth operation in any assembled position

• Provides extra strength and rigidity to handle continuous maximum loads without fatigue or deflection

1

23

4

5

6

7 7

8

9

2MP LHC 3MR RHC 4LVR BHC 5MR RHC

4 Anti-friction bearings are used exclusively (table at right)

• Optimum bearing selection provides longer blower life and added overhung shaft load capacity

Gear diameter

Single row ball

Double row ball

Cylindrical roller

Spherical roller

2" •

3–4" • •

5" • •

6–8" • •

Page 5: Legend Series - Gardner Denver

5

5 3–6" R versions feature improved timing and ease of teardown/rebuild through grip rings, which expand against the bore and compress on the shaft for a secure, mechanical shrink fit

2, 7 and 8" P versions feature precision machines alloy steel timing gears, permanently pinned to the shafts

• Assures non-slip timing even under the most strenuous loading conditions

6 High temperature Viton® oil seals

• Maximizes the seal life in continuous, severe-duty applications to provide leak-free operation

7Flex-Mount™ design on 2, 7 and 8" blowers is adaptable to either vertical or horizontal installation, while 3–6" R-version blowers have universal feet

• The feet are precisely machined and match the footprints of many competitive units

8 Timing gears and gear end bearings are splash lubricated utilizing an abundant oil reservoir. A non-asbestos graphite gasketed, oil-tight housing encloses the timing gears. Drive end bearings are grease lubricated through fittings. Lip-type seals prevent oil and grease from entering the impeller chamber

• Superior gear and bearing lubrication is assured at all operating conditions with minimal maintenance

9 High strength steel drive shaft is extended for V-belt drive or direct connection

• Provides greater blower durability and installation flexibility

Available with Mechanical Gas SealsThe Legend design accommodates mechanical gas seals for critical gas applications with proven results based on a large installed base

• This field proven seal design allows trouble-free operation in critical gas applications

6HVR BHC 7MVP BHC 8HVP BHC

Page 6: Legend Series - Gardner Denver

6

The Sutorbilt Legend Design

Horizontal Configuration, Right Hand Drive

Horizontal Configuration, Left Hand Drive

Vertical Configuration, Bottom Hand Drive

Universal Foot

Vertical Configuration, Top Hand Drive

TransferA constant volume of trapped air or gas is transferred around the cylinder to the discharge port.

DischargeA constant volume of air or gas is forced out through

the discharge port.inTakeA constant volume of air or gas is drawn into the cylinder by the action of the turning impellers.

The Sutorbilt PD Cycle• Two figure-eight impellers turn in opposite directions

within a machined housing

• Transferring a constant volume of air or gas from inlet to discharge with every rotation of the blower drive shaft

• No lubrication within the cylinder is required

• Rotating components are held in close tolerance do not contact each other

• Impeller positioning is maintained by precision timing gears affixed to each impeller shaft

• Gear and bearing lubrication occurs externally to the cylinder assuring clean, oil-free gas delivery under all operating conditions

Universal Foot & Flex-Mount™ Design Provides Maximum Installation Versatility

• 3–6" R versions feature the “universal” mounting feet which allow them to be mounted in vertical and horizontal configurations

• 2", 7" & 8" P versions feature Flex-Mount™ design creating interchangeability on existing and new applications

Page 7: Legend Series - Gardner Denver

7

Photo A

Photo B

State-of-the-Art QualityThe Gardner Denver line of Sutorbilt Legend blowers and vacuum pumps are engineered and manufactured under strict ISO 9001:2000 quality standards in our 330,000 square feet state-of-the-art facility in Sedalia, MO (photo below)

• Gardner Denver makes it a priority to invest in highly skilled people who take pride in producing quality products

• Our Flexible Machining System (FMS) assures consistent production of the highest quality Legend components

• Attention to detail is found throughout the manufacturing process such as utilizing advanced coordinate measuring equipment (photo A)

• Legend components are subjected to quality inspections before assembly

• Prior to shipment, every Legend is tested against rigid standards using our computer automated testing stations (photo B)

Page 8: Legend Series - Gardner Denver

8

Low

Pr

ess

ur

e u

nit

sSIZE

DIA. INLET& OUTLET

DISPL. CU. FT./REV.

RPM2 PSIG 3 PSIG 4 PSIG 5 PSIG 6 PSIG 7 PSIG

CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP

2LP2LVP 2"-S 0.035

2,8003,2503,5605,275

7691

102162

1.11.31.42.0

718697

157

1.61.82.02.8

678293

153

2.12.42.63.7

637989

149

2.52.93.24.6

597586

146

3.03.43.75.3

567283

143

3.54.04.36.1

3LR3LVR 2½"-S 0.104

1,7602,2652,7703,600

149202254341

1.92.42.93.7

142194247333

2.83.54.35.3

135188240327

3.74.75.57.1

130182235321

4.55.66.88.9

124177230316

5.26.78.2

10.6

120172225311

6.17.89.6

12.4

4LR4LVR 3"-S 0.170

1,7602,1902,6203,600

253326400566

3.03.74.45.8

243316389556

4.55.36.38.7

234307381547

5.77.18.4

11.6

227300373539

7.18.8

10.614.5

220293366533

8.510.612.717.4

213286360526

9.912.414.820.3

5LR5LVR 4"-S 0.350

1,5001,7602,1002,850

463554673936

5.25.87.09.5

449540659922

7.58.8

10.514.2

438529648910

10.011.713.918.9

427518637900

12.414.617.423.6

418509628890

14.917.520.928.4

409500619882

17.420.424.433.1

6LR6LVR 6"-F 0.718

1,1701,7601,9302,350

7391,1621,2841,586

8.012.013.116.0

7161,1391,2611,563

11.918.019.724.0

6971,1201,2421,544

15.924.026.332.0

6801,1031,2251,527

19.929.932.840.0

6641,0881,2101,512

23.935.939.448.0

6501,0741,1961,497

27.941.946.056.0

7LP7LVP 8"-F 1.200

1,1701,4651,7602,050

1,2771,6311,9852,333

13.316.720.023.3

1,2481,6021,9562,304

20.025.030.035.0

1,2241,5781,9322,280

16.633.340.046.6

1,2031,5571,9112,259

33.341.750.158.3

1,1841,5381,8922,240

39.950.060.170.0

8LP8LVP 10"-F 1.740

8801,1701,3751,800

1,3661,8712,2282,967

14.519.322.729.7

1,3291,8342,1912,930

21.828.934.044.5

1,2981,8032,1592,899

29.038.645.459.4

1,2711,7752,1322,871

36.348.256.774.2

1,2461,7502,1072,847

43.557.968.089.1

Med

iuM

Pr

ess

ur

e u

nit

s

SIZE DIA.INLET& OUTLET

DISPL.CU. FT./REV. RPM

7 PSIG 9 PSIG 10 PSIG 12 PSIG 13 PSIG 14 PSIGCFM BHP CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP

2MP2MVP 1"-S 0.017

2,8003,2503,5605,275

25333867

1.71.92.13.1

22303564

2.12.52.73.9

283463

2.73.04.4 60 5.1

3MR3MVR 2"-S 0.060

1,7602,2652,7703,600

6495

125175

3.64.65.57.2

5989

119169

4.65.87.19.2

87117167

6.47.9

10.2112162

9.512.3

4MR4MVR 2½"-S 0.117

1,7602,1902,6203,600

144194245359

6.88.5

10.214.0

136186236351

8.810.913.118.0

132182233347

9.812.114.520.0

5MR5MVR 4"-S 0.210

1,5001,7602,1002,850

237292363521

10.512.314.619.9

227281353510

13.415.818.825.5

222277348506

14.917.520.928.4

213268339497

17.921.025.134.0

209263335493

19.422.827.236.9

6MR6MVR 5"-S 0.383

1,1701,7601,9302,350

332558622784

14.922.424.529.9

316542607768

19.128.831.538.4

309535600761

21.232.035.042.7

296522587748

25.538.342.051.2

289515580741

27.641.545.555.5

283509574735

29.744.749.159.7

7MP7MVP 6"-F 0.733

1,1701,4651,7602,050

693909

1,1251,338

28.535.642.849.9

671887

1,1031,316

36.645.855.064.1

661877

1,0931,306

40.750.961.171.2

8MP8MVP 8"-F 1.040

8801,1701,3751,800

7091,0111,2241,666

30.440.447.462.1

681983

1,1961,638

39.051.961.079.9

669970

1,1831,625

43.457.767.888.7

Hig

H P

res

su

re

un

its

SIZEDIA. INLET& OUTLET

DISPL. CU.FT./REV.

RPM7 PSIG 8 PSIG 9 PSIG 11 PSIG 13 PSIG 15 PSIG

CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP

3HR3HVR 1¼"-S 0.045

1,7602,2652,7703,600

466991

129

2.63.44.15.4

446689

126

3.03.94.76.1

416487

124

3.44.35.36.9

6083

120

5.36.58.4 117 10.0 113 11.5

4HR4HVR 1½"-S 0.069

1,7602,1902,6203,600

80110139207

4.05.06.08.2

77107137204

4.65.76.99.4

74104134201

5.26.47.7

10.6

99129196

7.99.4

13.0124192

11.115.3 188 17.7

5HR5HVR 2½"-S 0.140

1,5001,7602,1002,850

154191238343

7.08.29.8

13.2

151187235340

8.09.3

11.115.1

147183231336

9.010.512.517.0

140177224329

10.912.815.320.8

171218323

15.218.124.6

165213318

17.520.928.4

6HR6HVR 3"-S 0.227

1,1701,7601,9302,350

188321360455

8.813.314.517.7

182316355450

10.115.116.620.2

177311350445

11.317.018.722.8

168302340436

13.820.822.827.8

159293332427

16.424.627.032.9

285324419

28.431.137.9

7HP7HVP 4"-S 0.367

1,1701,4651,7602,050

332441549655

14.217.821.425.0

326434542649

16.320.424.528.5

319428536642

18.322.927.632.1

308416524631

22.428.033.739.2

297405514620

26.533.139.846.4

287396504610

30.538.245.953.5

8HP8HVP 4"-S 0.566

8801,1701,3751,800

363528644884

16.522.025.833.8

354518634875

18.925.129.538.6

345509626866

21.228.333.243.5

329493609850

26.034.540.653.1

315479595835

30.740.848.062.8

301465581822

35.447.155.372.4

Performance based on inlet air at standard temperature of 68˚F, an ambient pressure of 14.7 psia and 36% relative humidity. For performance at non-standard conditions, contact your authorized Gardner Denver representative. S=Screwed connections std. NPT. F=flange connections. Intake and outlet pipe connections are same type and size.

Sutorbilt Legend Pressure Performance Data

Page 9: Legend Series - Gardner Denver

9

Low

Vac

uu

M u

nit

sSIZE DIA. INLET

& OUTLETDISPL. CU.

FT./REV. RPM2 "Hg 4 "Hg 8 "Hg 10 "Hg 12 "Hg 14 "Hg

CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP

2LP2LVP 2"-S 0.035

2,8003,2503,5604,1655,275

8298

108130168

0.70.70.80.91.1

7490

101122161

1.11.31.41.61.9

617788

109148

2.02.32.52.93.6

557182

103142

2.52.83.13.64.5

647596

135

3.43.74.35.2 128 6.0

3LR3LVR 2½"-S 0.104

1,7602,2652,7703,600

158211264350

1.11.31.51.9

147200252338

1.92.42.93.7

128180233319

3.64.65.47.0

118171223309

4.55.56.78.7

108160213299

5.16.68.1

10.5 288 12.2

4LR4LVR 3"-S 0.170

1,7602,1902,6203,600

266339412579

1.61.92.33.1

250323396563

3.03.74.35.7

224297370537

5.66.98.3

11.4

211284357524

7.08.7

10.414.3

197270343510

8.410.412.417.1

329495

14.520.0

5LR5LVR 4"-S 0.350

1,5001,7602,1002,850

480571690953

2.63.13.64.8

459550669932

5.15.76.89.3

424515634896

9.811.513.718.6

406497616879

12.214.317.123.2

388479598860

14.717.220.527.9

459578840

20.124.032.5

6LR6LVR 6"-F 0.718

1,1701,7601,9302,350

7661,1901,3121,614

4.15.96.57.9

7321,1151,2781,579

7.811.812.915.7

6741,0971,2191,521

15.723.525.831.4

6451,0681,1911,492

19.629.432.339.3

6151,0381,1601,462

23.535.338.747.2

1,0051,1271,429

41.245.255.0

7LP7LVP 8"-F 1.200

1,1701,4651,7602,050

1,3121,6662,0202,368

6.58.29.8

11.5

1,2681,6221,9762,324

13.116.419.722.9

1,1951,5491,9032,251

26.232.839.345.8

1,1591,5131,8672,215

32.740.949.257.3

1,1211,4751,8292,177

39.249.159.068.7

8LP8LVP 10"-F 1.740

8801,1701,3751,800

1,4111,9162,2733,012

7.19.5

11.114.6

1,3551,8602,2172,953

14.319.022.329.2

1,2611,7662,1222,862

28.537.944.658.4

1,2141,7192,0762,815

35.747.455.772.9

1,1651,6702,0262,765

42.856.966.987.6

Med

iuM

Vac

uu

M u

nit

s

SIZE DIA. INLET&OUTLET

DISPL. CU.FT./REV. RPM

6 "Hg 10 "Hg 12 "Hg 14 "Hg 15 "Hg 16 "HgCFM BHP CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP

2MP2MVP 1"-S 0.017

2,8003,2503,5604,1655,275

3139445473

0.80.90.91.11.4

2432374867

1.21.41.51.72.2

344463

1.82.12.6

4059

2.43.0 57 3.2

3MR3MVR 2"-S 0.060

1,7602,2652,7703,600

76106136186

1.62.02.43.1

6393

124174

2.63.34.05.0

5787

117167

3.13.94.76.0

110160

5.47.0 156 7.5

4MR4MVR 2½"-S 0.117

1,7602,1902,6203,600

161211262376

3.03.74.45.9

142193243358

4.96.07.19.8

132183233348

5.87.28.6

11.8222337

10.013.7 331 14.7 325 15.7

5MR5MVR 4"-S 0.210

1,5001,7602,1002,850

258313384542

4.55.26.28.4

235290361519

7.38.6

10.313.9

223277349506

8.810.312.316.7

209264335493

10.312.114.419.5

328485

15.420.9 477 22.3

6MR6MVR 5"-S 0.383

1,1701,7601,9302,350

363589655815

6.39.4

10.312.6

328554619780

10.415.717.221.0

310536601762

12.518.820.725.2

290516581741

14.622.024.129.3

279505570731

15.723.525.831.4

267493558719

16.725.127.533.5

7MP7MVP 6"-F 0.733

1,1701,4651,7602,050

738954

1,1701,383

12.015.018.021.0

688904

1,1211,333

20.025.030.035.0

662878

1,0941,307

24.030.036.142.0

633850

1,0651,278

28.035.042.149.0

618834

1,0501,263

30.037.545.152.5

601817

1,0341,246

32.040.048.156.0

8MP8MVP 8"-F 1.040

8801,1701,3751,800

7651,0671,2801,722

12.817.020.026.2

7031,0051,2181,660

21.328.333.343.6

670972

1,1851,627

25.634.040.052.3

634936

1,1491,591

29.839.746.661.0

615917

1,1301,572

32.042.550.065.4

594896

1,1091,551

34.145.353.369.7

Hig

H V

acu

uM

un

its

SIZE DIA. INLET& OUTLET

DISPL. CU.FT./REV. RPM

6 "Hg 8 "Hg 12 "Hg 14 "Hg 15 "Hg 16 "HgCFM BHP CFM BHP CFM BHP CFM BHP CFM BHP CFM BHP

3HR3HVR 1¼"-S 0.045

1,7602,2652,7703,600

5578

100138

1.11.41.72.3

507395

133

1.51.92.33.0

406285

122

2.22.83.54.5

79117

4.15.3

76113

4.45.7 110 6.0

4HR4HVR 1½"-S 0.069

1,7602,1902,6203,600

91121151218

1.72.12.53.5

85115144212

2.32.83.44.6

72102132199

3.44.25.16.9

95124192

4.95.98.1

91120188

5.36.38.7 184 9.3

5HR5HVR 2½"-S 0.140

1,5001,7602,1002,850

170206254359

2.93.44.15.6

161198245350

3.94.65.57.4

144180228333

5.96.98.2

11.2

134171218323

6.88.09.6

13.0

165213318

8.610.314.0 312 14.9

6HR6HVR 3"-S 0.227

1,1701,7601,9302,350

209343381477

3.75.66.17.5

197331370165

4.87.48.29.9

173307345441

7.411.212.214.9

159293332427

8.713.014.317.4

152286325420

9.314.015.318.6

278317412

14.916.319.9

7HP7HVP 4"-S 0.367

1,1701,4651,7602,050

359467575682

6.07.59.0

10.5

344453561667

8.010.012.014.0

314422531637

12.015.018.121.0

297406514620

14.017.521.124.5

288396505611

15.018.822.626.3

278387495601

16.020.024.128.0

8HP8HVP 4"-S 0.566

8801,1701,3751,800

400564680921

7.09.3

10.914.2

380544660901

9.312.314.519.0

338502618859

13.918.521.728.5

315479595835

16.221.625.433.2

302466582823

17.423.127.235.6

453569809

24.729.038.0

Sutorbilt Legend Vacuum Performance Data

Page 10: Legend Series - Gardner Denver

10

Sutorbilt Legend Dimensional Data

Horizontal ConfigurationsSIZE WT. CONN. A B C D E F G H J K L M N O P R S T U

2M 72 S 5.00 2.00 2.00 6.36 3.25 3.75 2.75 7.00 9.25 1.00 5.16 10.00 2.76 1.97 1.62 0.19 0.620 0.13 0.44

2L 86 S 7.00 3.00 2.00 6.36 3.25 3.75 2.75 7.00 9.25 2.00 6.16 12.00 4.76 1.97 1.62 0.19 0.620 0.13 0.44

3H 88 S 6.75 2.69 2.68 7.75 3.88 5.00 3.50 8.88 11.26 1.25 5.86 12.05 3.50 2.05 1.62 0.19 0.750 0.25 0.62 x 1.12

3M 110 S 7.62 3.13 2.68 7.75 3.88 5.00 3.50 8.88 11.26 2.00 6.30 12.92 4.38 2.05 1.62 0.19 0.750 0.25 0.62 x 1.12

3L 132 S 10.25 4.44 2.68 7.75 3.88 5.00 3.50 8.88 11.26 2.50 7.61 15.55 7.00 2.05 1.62 0.19 0.750 0.25 0.62 x 1.13

4H 138 S 7.24 3.00 3.00 8.25 4.19 6.25 4.00 10.44 12.38 1.50 6.91 13.74 4.00 2.39 1.62 0.19 0.875 0.38 0.5 x 0.75

4M 160 S 9.49 4.13 3.00 8.25 4.19 6.25 4.00 10.44 12.38 2.50 8.04 15.99 6.26 2.39 1.62 0.19 0.875 0.38 0.5 x 0.75

4L 182 S 11.99 5.38 3.00 8.25 4.19 6.25 4.00 10.44 12.38 3.00 9.29 18.49 8.76 2.39 1.62 0.19 0.875 0.38 0.5 x 0.75

5H 210 S 10.85 3.50 3.50 9.00 5.19 7.00 5.00 12.19 15.38 2.50 8.19 16.38 4.86 2.50 2.00 0.25 1.125 0.38 0.56 x 0.75

5M 232 S 12.85 4.50 3.50 9.00 5.19 7.00 5.00 12.19 15.38 4.00 9.19 18.38 6.86 2.50 2.00 0.25 1.125 0.38 0.56 x 0.75

5L 306 S 16.85 6.50 3.50 9.00 5.19 7.00 5.00 12.19 15.38 4.00 11.19 22.38 10.86 2.50 2.00 0.25 1.125 0.38 0.56 x 0.75

6H 318 S 9.76 3.94 4.00 16.50 6.00 8.75 6.00 14.75 18.00 3.00 9.18 18.57 5.76 2.94 2.00 0.31 1.375 0.50 0.75 x 1

6M 366 S 13.00 5.56 4.00 16.50 6.19 8.75 6.00 14.94 18.00 5.00 10.80 21.81 9.00 2.94 2.00 0.31 1.375 0.50 0.75 x 1

6L 538 F 20.00 9.06 4.00 16.50 7.50 8.75 6.00 16.25 18.00 6.00 14.31 28.82 16.00 2.94 2.00 0.31 1.375 0.50 0.75 x 1

7H 482 S 12.00 4.63 5.50 15.00 9.69 11.00 7.00 20.69 22.00 4.00 10.00 21.03 5.74 3.21 2.50 0.38 1.562 0.50 0.75 x 1

7M 638 F 17.50 7.38 5.50 15.00 8.50 11.00 7.00 19.50 22.00 6.00 12.75 26.53 11.24 3.21 2.50 0.38 1.562 0.50 0.75 x 1

7L 770 F 24.50 10.88 5.50 15.00 8.50 11.00 7.00 19.50 22.00 8.00 16.25 33.53 18.24 3.21 2.50 0.38 1.562 0.50 0.75 x 1

8H 736 S 13.50 5.75 6.00 16.00 10.00 12.50 8.00 22.50 25.25 4.00 11.69 23.85 7.76 3.86 2.50 0.38 1.750 0.50 0.75 x 1

8M 938 F 19.00 8.50 6.00 16.00 10.00 12.50 8.00 22.50 25.25 8.00 14.44 29.35 13.26 3.86 2.50 0.38 1.750 0.50 0.75 x 1

8L 1,170 F 27.00 12.50 6.00 16.00 10.00 12.50 8.00 22.50 25.25 10.00 18.44 37.35 21.26 3.86 2.50 0.38 1.750 0.50 0.75 x 1

S=Threaded connections standard NPT. F=flange connections. Inlet and outlet connections are the same type and size. Dimensions are in inches. Weights are in pounds and include shipping cartons or pallets and are approximate.

Page 11: Legend Series - Gardner Denver

11

Vertical ConfigurationsSIZE WT. CONN. A B C D E F G H J K L M N O P R S T U

2MV 72 S 5.00 2.00 1.50 5.60 3.50 4.88 6.25 9.50 6.50 1.00 5.16 10.00 2.76 1.97 1.62 0.19 0.6200 0.13 0.44

2LV 86 S 7.00 3.00 1.50 5.60 3.50 4.88 6.25 9.50 6.50 2.00 6.16 12.00 4.76 1.97 1.62 0.19 0.6200 0.13 0.44

3HV 88 S 6.75 2.69 2.68 7.75 4.50 6.25 8.00 11.88 7.76 1.25 5.86 12.05 3.50 2.05 1.62 0.19 0.7500 0.25 0.62 x 1.12

3MV 110 S 7.62 3.13 2.68 7.75 4.50 6.25 8.00 11.88 7.76 2.00 6.30 12.92 4.36 2.05 1.62 0.19 0.7500 0.25 0.62 x 1.12

3LV 132 S 10.25 4.44 2.68 7.75 4.50 6.25 8.00 11.88 7.76 2.50 7.61 15.55 7.00 2.05 1.62 0.19 0.7500 0.25 0.62 x 1.12

4HV 138 S 7.24 3.00 3.00 8.25 4.50 6.50 8.50 12.69 8.40 1.50 6.91 13.74 4.00 2.39 1.62 0.19 0.8750 0.38 0.5 x 0.75

4MV 160 S 9.49 4.13 3.00 8.25 4.50 6.50 8.50 12.69 8.40 2.50 8.04 15.99 6.26 2.39 1.62 0.19 0.8750 0.38 0.5 x 0.75

4LV 182 S 11.99 5.38 3.00 8.25 4.50 6.50 8.50 12.69 8.40 3.00 9.29 18.49 8.76 2.39 1.62 0.19 0.8750 0.38 0.5 x 0.75

5HV 210 S 10.85 3.50 3.50 9.00 5.50 8.00 10.50 15.85 10.38 2.50 8.19 16.38 4.86 2.50 2.00 0.25 1.1250 0.38 0.56 x 0.75

5MV 232 S 12.85 4.50 3.50 9.00 5.50 8.00 10.50 15.85 10.38 4.00 9.19 18.38 6.86 2.50 2.00 0.25 1.1250 0.38 0.56 x 0.75

5LV 306 S 16.85 6.50 3.50 9.00 5.50 8.00 10.50 15.85 10.38 4.00 11.19 22.38 10.86 2.50 2.00 0.25 1.1250 0.38 0.56 x 0.75

6HV 318 S 9.76 3.94 4.00 10.50 8.75 11.75 14.75 20.75 12.00 3.00 9.18 18.57 5.76 2.94 2.00 0.31 1.3750 0.50 0.75 x 1

6MV 366 S 13.00 5.56 4.00 10.50 8.75 11.75 14.75 20.80 12.38 5.00 10.80 21.81 9.00 2.94 2.00 0.31 1.3750 0.50 0.75 x 1

6LV 538 F 20.00 9.06 4.00 10.50 8.75 11.75 14.75 20.75 15.00 6.00 14.31 28.81 9.00 2.93 2.00 0.31 1.3750 0.50 0.75 x 1

7HV 482 S 12.00 4.62 5.50 14.04 11.00 14.50 18.00 25.50 19.38 4.00 10.00 21.03 5.74 3.21 2.50 0.38 1.5620 0.50 0.75 x 1

7MV 638 F 17.50 7.37 5.50 14.04 11.00 14.50 18.00 25.50 17.00 6.00 12.75 26.53 11.24 3.21 2.50 0.38 1.5620 0.50 0.75 x 1

7LV 770 F 24.50 10.87 5.50 14.04 11.00 14.50 18.00 25.50 17.00 8.00 16.25 33.53 18.24 3.21 2.50 0.38 1.5620 0.50 0.75 x 1

8HV 736 S 13.50 5.75 6.00 16.00 12.50 16.50 20.50 29.12 20.00 4.00 11.69 23.85 7.76 3.86 2.50 0.38 1.7500 0.50 0.75 x 1

8MV 938 F 19.00 8.50 6.00 16.00 12.50 16.50 20.50 29.12 20.00 8.00 14.44 29.35 13.26 3.86 2.50 0.38 1.7500 0.50 0.75 x 1

8LV 1,170 F 27.00 12.50 6.00 16.00 12.50 16.50 20.50 29.12 20.00 10.00 18.44 37.35 21.26 3.86 2.50 0.38 1.7500 0.50 0.75 x 1

S=Threaded connections standard NPT. F=flange connections. Inlet and outlet connections are the same type and size. Dimensions are in inches. Weights are in pounds and include shipping cartons or pallets and are approximate.

Page 12: Legend Series - Gardner Denver

www.GardnerDenverProducts.com [email protected]

Gardner Denver, Inc. 1800 Gardner Expressway, Quincy, IL 62305Telephone: (800) 682-9868 FAX: (217) 221-8780

©2009 Gardner Denver, Inc. Printed in U.S.A. PD-SB-L 4th Ed. 10/09

Please recycle after use.

Member

8

ACCREDITED

Genuine Gardner Denver Parts & Lubricants• Maintain the Gardner Denver performance advantage

and reliability with Genuine GD Replacement Parts available through authorized sales and service representatives

• Protect your Gardner Denver investment with AEON® PD, the only lubricant specially formulated for all blowers in any environment

– Now available:

>> AEON® PD-XD (eXtreme Duty)

>> Designed specifically for high ambient and high discharge temperature applications

– Also available:

>> AEON® PD (standard applications)

>> AEON® PD-FG (Food Grade)

Retain your Gardner Denver advantage with Genuine Replacement Parts

• Replacement parts incorporate the most recent design upgrades

• All parts meet original manufacturing specifications and tolerances for guaranteed fit and function

• Pre-packaged overhaul kits with detailed service manuals are available from your local authorized Gardner Denver distributor