lesson guide bodice sloper draping: beginner · lesson guide bodice sloper draping: beginner 3...

142
Lesson Guide Bodice Sloper Draping: Beginner 1 Module 1 – Prepare the Dress Form 1 Step 1 Apply style tape to your dress form to establish the bust level. Tape from center front to side seam.

Upload: vankhanh

Post on 18-Jul-2019

269 views

Category:

Documents


5 download

TRANSCRIPT

Page 1: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

Lesson Guide Bodice Sloper Draping: Beginner

1

Module 1 – Prepare the Dress Form

1

Step 1 Apply style tape to your dress form to establish the bust level. Tape from center front to side seam.

Page 2: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

2

Module 1 – Prepare the Dress Form

Step 2 And on the back, the shoulder blade level, which is 1/4th the distance from your neckline and waistline. Tape from the center back to the armhole ridge. Be sure that both guidelines lines are parallel to the floor.

Page 3: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

Lesson Guide Bodice Sloper Draping: Beginner

3

Module 2 – Extract Measurements

Step 1 To prepare your front muslin block measure across the bust level from center front to side seam and add 4”. This will be the width of your front block.

Page 4: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

4

Module 2 – Extract Measurements

Step 2 For the front block length, measure from the neckband to the waistline (at the bottom of the tape) and add 3”.

Page 5: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

5

Module 2 – Extract Measurements

Step 3 On the back, measure at the widest part of the back, under the armplate from side seam to center back and add 4”. This will be the width of your back block.

Page 6: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

6

Module 2 – Extract Measurements

Step 4 Then measure from top of the back neckband to the waistline again, at the bottom of the tape, and add 2” for the back block length.

Page 7: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

Lesson Guide Bodice Sloper Draping: Beginner

7

Module 3 – Prepare Muslin Blocks

Step 1A Using the measurements that you extracted from your dress form, prepare your front and back muslin blocks. Measure, tear, and block your muslin pieces so that your grains are at right angles to each other.

Page 8: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

8

Module 3 – Prepare Muslin Blocks

Step 1B Use your L square to check that your muslin corners are at right angles.

Page 9: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

9

Module 3 – Prepare Muslin Blocks

Step 1C Turn your muslin block over and reblock if necessary.

Page 10: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

10

Module 3 – Prepare Muslin Blocks

Step 2 Then press your pieces in the direction of the length grain.

Page 11: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

Lesson Guide Bodice Sloper Draping: Beginner

11

Module 4 – Measurements & Mark Guidelines

Step 1 Front – draw lines on screen

Page 12: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

12

Module 4 – Measurements & Mark Guidelines

Step 1A You will need the following measurements when marking your muslin blocks begin-ning with the front: Neckband to bust level

Page 13: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

13

Module 4 – Measurements & Mark Guidelines

Step 1B Apex to center front

Page 14: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

14

Module 4 – Measurements & Mark Guidelines

Step 1C And then the side seam to the apex plus 1/8” added ease

Page 15: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

15

Module 4 – Measurements & Mark Guidelines

Step 2 On your front muslin block measure in 1” from the right side edge and drag a guide-line down, this represents center front

Page 16: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

16

Module 4 – Measurements & Mark Guidelines

Step 3 Then measure down from the top of the muslin your neckband to apex measurement and drag a guideline across your muslin block. This represents the bust level.

Page 17: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

17

Module 4 – Measurements & Mark Guidelines

Step 4 On the bust level, place a mark representing center front to apex and drop a guide-line down.

Page 18: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

18

Module 4 – Measurements & Mark Guidelines

Step 5A Taking your measurement from apex to side seam including the 1/8”ease, place a mark on the bust level. This represents side seam.

Page 19: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

19

Module 4 – Measurements & Mark Guidelines

Step 5B Divide the side seam to apex at bust level and drag a guideline down. This is your balance guideline.

Page 20: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

20

Module 4 – Measurements & Mark Guidelines

Step 6 On your shoulder blade level, extract the measurement from your center back to the armhole ridge plus 1/4” ease.

Page 21: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

21

Module 4 – Measurements & Mark Guidelines

Step 7 Measure in 1” from the left side of the muslin block, drag a guideline down. This is your center back

Page 22: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

22

Module 4 – Measurements & Mark Guidelines

Step 8A Measure down 3” from the top of the back muslin and place a mark to represent your center back neckline.

Page 23: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

23

Module 4 – Measurements & Mark Guidelines

Step 8B From center back neckline measure down your shoulder blade level and drag a guideline across. Place a mark representing your center back to armhole ridge measurement including the 1/4” ease.

Page 24: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

24

Module 4 – Measurements & Mark Guidelines

Step 9 From your armhole ridge marking, place another mark at 1 1/4” away and then drag a guideline down. This represents a back guideline.

Page 25: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

25

Module 4 – Measurements & Mark Guidelines

Step 10 Once you marked your muslin blocks give a final blocking and pressing in prepara-tion for draping.

Page 26: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

26

Module 4 – Measurements & Mark Guidelines

Step 11 Bend back your 1” extension and finger press both front and back block. Never iron the folded extension as it will stretch the grain.

Page 27: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

Lesson Guide Bodice Sloper Draping: Beginner

27

Module 5 – Draping the Front

Step 1 Begin the drape by lining up the apex marking on the muslin to the apex of the dress form. Secure it with 2 pins.

Page 28: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

28

Module 5 – Draping the Front

Step 2 Pin along the centerfront to the neckline, keeping the muslin bust level, level to the bust level of the dress form.

Page 29: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

29

Module 5 – Draping the Front

Step 3 As you pin the center front from bust level to waistline, make sure that you allow for bust ease. Meaning that you do not pin the muslin flat to the form in the area between the left and right apex points.

Page 30: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

30

Module 5 – Draping the Front

Step 4 Continue to pin along the bust level from side seam to the apex. Secure your pins in alternating directions, this will help stabilize the muslin while you drape. Distribute the 1/8” ease between the apex and side seam.

Page 31: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

31

Module 5 – Draping the Front

Step 5A Pin along your guideline down to the waistline. Make sure that your guideline is at a right angle to the bust level.

Page 32: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

32

Module 5 – Draping the Front

Step 5B Once you reach the waistline, pick up a pinch of ease with a pin and secure it at the waist/guideline intersection.

Page 33: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

33

Module 5 – Draping the Front

Step 6 Place a pin at the armhole side seam intersection.

Page 34: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

34

Module 5 – Draping the Front

Step 7 Next, slash at the guideline from below the waistline to the bottom of the waist tape. This releases the high hip area.

Page 35: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

35

Module 5 – Draping the Front

Step 8 Continue to pin the waistline until you reach the side seam waistline intersection.

Page 36: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

36

Module 5 – Draping the Front

Step 9 The waist dart is formed by picking up the excess with a pin at the waistline, at the bottom of the waist tape. Your muslin guideline is the center of the dart.

Page 37: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

37

Module 5 – Draping the Front

Step 10A Smooth the muslin around the neckline and with your fingernail, make a crease. Using your shears, cut away a rectangular piece of muslin at the centerfront neckline 1“ up and 1 “ over.

Page 38: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

38

Module 5 – Draping the Front

Step 10B Then release the neckline by slashing into the neckline excess to the creaseline. Be careful not to cut beyond the crease.

Page 39: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

39

Module 5 – Draping the Front

Step 11 Place a pin at the neckline shoulder intersection.

Page 40: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

40

Module 5 – Draping the Front

Step 12 Form the shoulder dart by smoothing the muslin up and over the chest area folding the dart flat with the dart excess on the inside. Be sure that you smooth out all wrinkles Your dart seam should align with the princess seam. This dart method is different from the waist dart which was formed with the dart excess on the outside. Secure the dart with a pin at the princess/shoulderline intersection.

Page 41: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

41

Module 5 – Draping the Front

Step 13 Then, place a pin at the shoulder armhole intersection.

Page 42: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

Lesson Guide Bodice Sloper Draping: Beginner

42

Module 6 – Marking the Front

Step 1A Start marking the front muslin in a counterclockwise direction. Place a dash mark on center front/neckline and a few small dots along the neckline.

Page 43: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

43

Module 6 – Marking the Front

Step 1B Crossmark the shoulder/neckline intersection.

Page 44: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

44

Module 6 – Marking the Front

Step 2 Place a crossmark on the dart fold and on the body at the shoulder/princess intersec-tion.

Page 45: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

45

Module 6 – Marking the Front

Step 3 Mark the armhole/shoulder intersection.

Page 46: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

46

Module 6 – Marking the Front

Step 4 Then mark the armhole, dotting along the armhole ridge. Stop at the screw level and place a crossmark.

Page 47: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

47

Module 6 – Marking the Front

Step 5 Place another crossmark at the side seam/underarm intersection. This is known as the tight body line.

Page 48: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

48

Module 6 – Marking the Front

Step 6 Crossmark at the waistline/side seam intersection and working at the bottom of the waist tape continue to place dot marks along the waistline until you come to the waist dart.

Page 49: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

49

Module 6 – Marking the Front

Step 7 Mark both sides of the waist dart and continue to dot the waistline until you get to the center front waistline intersection where you will then place a dash mark.

Page 50: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

50

Module 6 – Marking the Front

Step 8 To form the shoulder dart, guide the shoulder dart in the direction of the apex.

Page 51: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

51

Module 6 – Marking the Front

Step 9 Then smooth the waist dart along the guideline towards the apex.

Page 52: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

52

Module 6 – Marking the Front

Step 10 Mark the vanishing point of the shoulder dart 1” away from the apex.

Page 53: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

53

Module 6 – Marking the Front

Step 11 Mark the vanishing point of the waist dart 1” from the apex. Note that the fuller the bust the farther away the vanishing point of the dart is from the apex.

Page 54: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

54

Module 6 – Marking the Front

Step 12 Before removing the front muslin from the dress form, be sure that you have cap-tured all of your markings.

Page 55: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

Lesson Guide Bodice Sloper Draping: Beginner

55

Module 7 – Trueing the Front

Step 1A With your front bodice flat on the table begin by truing the neckline. Square a line for about 1/4” at the center front/neckline intersection. Drop your center front neckline 1/4” or to accommodate a collar, drop 1/2”.

Page 56: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

56

Module 7 – Trueing the Front

Step 1B Then blend the neckline to the shoulder seam.

Page 57: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

57

Module 7 – Trueing the Front

Step 2 True your shoulder dart by connecting the mark closest to the center front at the shoulder to the apex.

Page 58: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

58

Module 7 – Trueing the Front

Step 3 Come up 1/2” on that line and put a mark. Then connect the vanishing point of that dart to the corresponding mark at the shoulder.

Page 59: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

59

Module 7 – Trueing the Front

Step 4 True the waist dart by first making sure that the dart pick-up on both sides of the dart are equal. If not you will need to adjust. Then connect the lines to the dart’s vanishing point.

Page 60: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

60

Module 7 – Trueing the Front

Step 5A Next, true the side seam by first connecting the side seam/armhole mark to the waistline/side seam mark. This is called your tight body line.

Page 61: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

61

Module 7 – Trueing the Front

Step 5B For planning a bodice with a sleeve, drop your underarm 1“ and extend the side seam 1/2” to nothing at the waist. When planning a sleeveless garment drop the underarm 1/2” and extend the side seam 1/4”.

Page 62: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

62

Module 7 – Trueing the Front

Step 6A Before trueing the armhole, square a line off the lowered extended side seam for 1/2”.

Page 63: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

63

Module 7 – Trueing the Front

Step 6B True the armhole by placing your French curve so that it intersects in three places: on the lowered extended mark, at the screw level and at the shoulder. Then draw a line for the armhole.

Page 64: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

64

Module 7 – Trueing the Front

Step 6C Add 1/2 “ seam allowance to the front armhole stopping at the screw plate level.

Page 65: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

65

Module 7 – Trueing the Front

Step 6D Trim away the excess muslin.

Page 66: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

66

Module 7 – Trueing the Front

Step 7 Add 1/2 “ seam allowance to your lowered neckline and trim away the excess muslin.

Page 67: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

67

Module 7 – Trueing the Front

Step 8 Finger press the fold of the shoulder dart and then pin the dart closed with the dart material excess in the direction of center front.

Page 68: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

68

Module 7 – Trueing the Front

Step 9 True the shoulder by connecting the neck mark to the shoulder mark with your clear plastic ruler.

Page 69: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

69

Module 7 – Trueing the Front

Step 10 Add 1” seam allowance and trim.

Page 70: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

70

Module 7 – Trueing the Front

Step 11 Next, finger press the waist dart and pin closed with the dart material excess toward center front .

Page 71: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

71

Module 7 – Trueing the Front

Step 12 Place your front drape back on the dress form. Make sure that you put it back on the way you draped it matching all key points such as neckline, centerfront, waistline and the shoulder neckline intersection.

Page 72: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

72

Module 7 – Trueing the Front

Step 13 Align your shoulder seam and then sink your pins flat into the shoulder seam allow-ance.

Page 73: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

73

Module 7 – Trueing the Front

Step 14A Match up the side seam of the muslin to that of the dress form and then place pins about 1” away.

Page 74: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

74

Module 7 – Trueing the Front

Step 14B This will secure the muslin so that you can turn back the side seam in preparation for draping the back.

Page 75: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

Lesson Guide Bodice Sloper Draping: Beginner

75

Modue 8 – Draping the Back

Step 1 Line up your back muslin block starting at center back and neckline.

Page 76: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

76

Modue 8 – Draping the Back

Step 2 Line up the shoulder blade guideline with the shoulder blade level of the dress from, Pin the cross back shoulder mark to the armhole ridge of the dress form.

Page 77: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

77

Modue 8 – Draping the Back

Step 3 Trap your back ease between the guideline and center back, pinning in alternating directions.

Page 78: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

78

Modue 8 – Draping the Back

Step 4 Pin your center back beginning at the bottom of the waist tape to your shoulder blade level.

Page 79: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

79

Modue 8 – Draping the Back

Step 5A Position your back guideline so that it is at a right angle to the shoulder blade level.

Page 80: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

80

Modue 8 – Draping the Back

Step 5B Pick up a pinch of ease at the guideline on the waist and place a pin.

Page 81: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

81

Modue 8 – Draping the Back

Step 6A Next, release the pin holding the front side seam. In preparation for balancing the side seams, match up your front and back side seams at the armhole. Start at the top, by pinning the front and back tight bodyline at the underarm.

Page 82: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

82

Modue 8 – Draping the Back

Step 6B Then match the side seam at the waist.

Page 83: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

83

Modue 8 – Draping the Back

Step 7 The front and back side seam edges will either match exactly or, as demonstrated here, will be different. Here the back is wider than the front by 1/4” at the underarm. It is important that whatever the difference you must adjust the side seam at the waist so that the difference is the same both at the top and at the bottom.

Page 84: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

84

Modue 8 – Draping the Back

Step 8 To balance your side seam, remove the back waist guideline pin and repin, reposi-tioning the side seam at the waist until the side seam is balanced, meaning that whatever the difference is at the underarm, it should be the same at the waist, in this case 1/4”. If you are using a horizontal stripe or plaid, balancing the side seams is critical for matching.

Page 85: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

85

Modue 8 – Draping the Back

Step 9 Once you have balanced the side seam, secure pins along the back guideline to the dress form.

Page 86: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

86

Modue 8 – Draping the Back

Step 10 Slash your back guideline to the bottom of the waist tape to release the high hip.

Page 87: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

87

Modue 8 – Draping the Back

Step 11 Form your waist dart at the princess seam or at 2 1/2” away from center back for a size 6.

Page 88: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

88

Modue 8 – Draping the Back

Step 12A Pick up the dart and pin at the bottom of the waist tape.

Page 89: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

89

Modue 8 – Draping the Back

Step 12B Guide the dart upwards with your fingers.

Page 90: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

90

Modue 8 – Draping the Back

Step 13 Place another pin at the waist between the dart and center back at the bottom of the waist tape.

Page 91: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

91

Modue 8 – Draping the Back

Step 14 Fingernail press the back neckline to form a crease.

Page 92: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

92

Modue 8 – Draping the Back

Step 15 Slash into the crease with your shears to release the muslin around the neck.

Page 93: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

93

Modue 8 – Draping the Back

Step 16 Trim off some of the excess muslin to keep it for curling.

Page 94: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

94

Modue 8 – Draping the Back

Step 17 Place a pin at the shoulder neck intersection. The back shoulder will have 2 pinches of ease and one small dart.

Page 95: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

95

Modue 8 – Draping the Back

Step 18 Take a pinch of ease directly over the shoulder seam between shoulder neck inter-section and your front shoulder dart.

Page 96: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

96

Modue 8 – Draping the Back

Step 19 Then pick up 1/4” and form a dart in line with the front shoulder dart.

Page 97: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

97

Modue 8 – Draping the Back

Step 20 Take another pinch of ease between the dart and shoulder/armhole intersection.

Page 98: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

98

Modue 8 – Draping the Back

Step 21 Gently tug on the back muslin and pin to hold the muslin in place.

Page 99: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

99

Step 22 Then, place a pin at the shoulder/armhole intersection.

Modue 8 – Draping the Back

Page 100: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

Lesson Guide Bodice Sloper Draping: Beginner

100

Module 9 – Marking the Back

Step 1 Begin marking clockwise, placing a dash mark on center back neck and dots along the neckline.

Page 101: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

101

Module 9 – Marking the Back

Step 2 Place a crossmark at the shoulder/neckline intersection and continue to dot the shoulder seam.

Page 102: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

102

Module 9 – Marking the Back

Step 3 Mark both sides of the shoulder dart and continue dotting the shoulder until you reach the shoulder/armhole intersection where you will place a crossmark.

Page 103: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

103

Module 9 – Marking the Back

Step 4 Crossmark the tight body line at the underarm plate.

Page 104: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

104

Module 9 – Marking the Back

Step 5 Crossmark the waistline at the bottom of the waist tape.

Page 105: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

105

Module 9 – Marking the Back

Step 6 Continue to dot the waistline.

Page 106: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

106

Module 9 – Marking the Back

Step 7 Place a crossmark on both sides of the dart pick-up.

Page 107: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

107

Module 9 – Marking the Back

Step 8 Continue to dot the waistline and place a dash mark at the center back/waistline inter-section.

Page 108: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

108

Module 9 – Marking the Back

Step 9 Check to make sure that you have captured all of the necessary markings before re-moving the muslin from the dress form. Keep the side seams pinned together as well as the darts in preparation for trueing.

Page 109: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

Lesson Guide Bodice Sloper Draping: Beginner

109

Module 10 – Trueing the Back

Step 1 With the front muslin facing up, carefully reposition your underarm and waistline pins so that they are at right angles to the tight body line.

Page 110: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

110

Module 10 – Trueing the Back

Step 2 Place your tracing paper face up under the side seam. Using your tracing wheel, trace the waistline marking, the tight body line, the lowered extended side seam line and 1/2” along the armhole marking.

Page 111: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

111

Module 10 – Trueing the Back

Step 3 Turn your muslin over and check your markings.

Page 112: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

112

Module 10 – Trueing the Back

Step 4 Using your clear plastic ruler, add 1” seam allowance to your lowered extended side seam and trim away the excess muslin.

Page 113: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

113

Module 10 – Trueing the Back

Step 5 Remove your side seam pins and separate the front and back muslin.

Page 114: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

114

Module 10 – Trueing the Back

Step 6 On the back muslin, drop a guideline down from the armhole/shoulder blade mark for about 1”.

Page 115: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

115

Module 10 – Trueing the Back

Step 7A Using your French curve, true the upper armhole.

Page 116: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

116

Module 10 – Trueing the Back

Step 7B Flip the curve over and then true the lower armhole making sure that your curve rests on the new guideline and on the lowered extended underarm.

Page 117: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

117

Module 10 – Trueing the Back

Step 8 Extend the underarm seam out into the seam allowance with your ruler.

Page 118: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

118

Module 10 – Trueing the Back

Step 9 Finger press the center of the waist dart and remove the pin.

Page 119: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

119

Module 10 – Trueing the Back

Step 10 Find the center of the dart and drag a guideline up to the level of the lowered arm-hole and then place a dash mark. This is the vanishing point of the waist dart.

Page 120: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

120

Module 10 – Trueing the Back

Step 11 Mark the dart center and connect the waist markings to the vanishing point of the dart.

Page 121: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

121

Module 10 – Trueing the Back

Step 12 Next, unpin the back shoulder dart and ease pins

Page 122: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

122

Module 10 – Trueing the Back

Step 13 Place your straight ruler on the shoulder dart mark closest to center back then draw a straight line that connects to the vanishing point of the waist dart.

Page 123: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

123

Module 10 – Trueing the Back

Step 14 Measure down 3 1/4” from the shoulder and place a mark.

Page 124: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

124

Module 10 – Trueing the Back

Step 15 Then connect that point to the shoulder mark closest to the armhole to form the back shoulder dart.

Page 125: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

125

Module 10 – Trueing the Back

Step 16 Fingerpress the back shoulder dart and pin the dart closed with the excess toward center back.

Page 126: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

126

Module 10 – Trueing the Back

Step 17A The back shoulder is trued in 2 steps. First with the French curve connecting the neck to the dart.

Page 127: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

127

Module 10 – Trueing the Back

Step 17B Flip the curve over and true from the dart to the armhole.

Page 128: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

128

Module 10 – Trueing the Back

Step 18A Square a line for 1/4” off center back/back neck

Page 129: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

129

Module 10 – Trueing the Back

Step 18B Using your French curve, true the back neckline.

Page 130: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

130

Module 10 – Trueing the Back

Step 19 Add 1/2” seam allowance to the neckline.

Page 131: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

131

Module 10 – Trueing the Back

Step 20A Next, add 1” seam allowance.

Page 132: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

132

Module 10 – Trueing the Back

Step 20B Trim the excess muslin from the shoulder and the neckline.

Page 133: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

133

Module 10 – Trueing the Back

Step 21 Finger press the back waist dart with the dart excess towards center back and pin the dart closed.

Page 134: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

134

Module 10 – Trueing the Back

Step 22 Pin the back side seam over front on the lowered extended seamline.

Page 135: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

135

Module 10 – Trueing the Back

Step 23A If your bodice has a sleeve then you will need to lower the side seam 1/4” before blending the waistline with your hip curve.

Page 136: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

136

Module 10 – Trueing the Back

Step 23B Flip the hip curve over to get a position that best connects your waistline mark-ings. Be sure that your centerfront and center back waistlines are at right angles to center-front and center back.

Page 137: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

137

Module 10 – Trueing the Back

Step 24 Add 1” seam allowance to the waistline and trim the excess muslin.

Page 138: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

138

Module 10 – Trueing the Back

Step 25A Add 1/2 “ seam allowance to your front and back armhole.

Page 139: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

139

Module 10 – Trueing the Back

25B Trim the excess muslin.

Page 140: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

140

Module 10 – Trueing the Back

Step 26A Fingerpress the back shoulder seam allowance.

Page 141: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

141

Module 10 – Trueing the Back

Step 26B Pin the back shoulder over the front, trapping the back shoulder ease between the pins.

Page 142: Lesson Guide Bodice Sloper Draping: Beginner · Lesson Guide Bodice Sloper Draping: Beginner 3 Module 2 – Extract Measurements Step 1 To prepare your front muslin block measure

142

Module 10 – Trueing the Back

Step 27A Then place the bodice back on the dress form the way you draped it and check the fit.