letter of transmittal 307

transmitting:

VCBO Architecture, LLC ______________________ Whitney McPhie Griffith

LETTER OF TRANSMITTAL 307

project Suva, Fiji Temple Renovation project no 12730

date 2015-01-27

attention Russ Tanner firm(s) Church of Jesus Christ of Latter-DaySaints

Katie Christensen VCBO Architecture, LLCCoreen Crouch VCBO Architecture, LLCBrian Peterson VCBO Architecture, LLCJohn Clayton Westland ConstructionRich Darrington Westland ConstructionStanley Houghton Westland ConstructionSteven LoForti Westland ConstructionBill Naylor Westland Construction

qty description notes1 12730 - 069; 102813, 102814, 112319 - Toilet

Acc, Baby, LaundryPlease revise & resubmit.

SUBMITTAL TRANSMITTAL LETTER

Suva Fiji Temple Renovation 2-20 Lakeba St.

Samabula, Suva, Fiji

Ref. # ☒ Submittal

☐ Re-Submittal 69 Contractor Architect Subcontractor Westland Construction, Inc. 1411 West 1250 South #200 Orem, UT 84058 801-374-6085

VCBO Architecture 524 South 600 East Salt Lake City, UT 84102 801-575-8800

Rex Williams & Sons, Inc. 1771 W Alexander St. Salt Lake City, UT 84126 801-972-6611

Spec Section Description

102813, 102814, 112319

Commercial Toilet Accessories, Baby-Changing Station, Laundry Finishing Equipment

Name of Supplier/Manufacturer

Bradley, Kohler, Restoration Hardware, Andis, Rivers Edge, Hafele, Bobrick Westland Construction Remarks

Architect Remark

For review.

(801) 374-6085 (801) 374-6060 FAX

1/23/2015 Steven LoForti

VERIFY ALL GRAB BAR LENGTHS WITH ON SITECONDITIONS.PLEASE INCLUDE LOCATIONS WITH THERE-SUBMITTAL

Corrections or comments made on the shop drawings during thisreview do not relieve contractor from compliance withrequirements of the drawings and specifications. This check isonly for review of general conformance with the design concept ofthe project and general compliance with the information given inthe contract documents. The contractor is responsible for:confirming and correlating all quantities and dimensions; selectingfabrication processes and techniques of construction;coordinating his work with that of all other trades; and performinghis work in a safe and satisfactory manner.

REVIEWED REVISE & RESUBMIT

VCBO ARCHITECTURE, L.L.C.

Date: 01/27/2015 By:____________________

REJECTED FURNISH AS CORRECTED

TBA# Manufacturer Model # Size Qty.

Backin

g

Req

d.?

Ro

ug

h

Op

en

ing

Req

d?

Notes

Bradley 522 12

Bradley 234 4 X

Bradley 8120 18" 7 X



Bradley 8120-059 18" x 30" 2 X

Bradley 4017 4 X

Bradley 4722.15 7 X

Kohler K-7346 10 X Hole in counter by others

Restoration

Hardware Chatham 4 X Specified Baldwin model is discontinued

Bradley 9124 18 X

Bradley 9984 1 X


Bradley 9533 48" x 72" 4

Andis HD-7L 4 Electrical hook-up by others

Restoration

Hardware Campaign 24" x 36" 6 X

Bradley 962-11 1 X

Bradley 9569 2 X

Rivers Edge FS4220 1 X

Hafele IronFix 1 X

Bradley P10-696 4 X

Bobrick B-526 6 X

WASHROOM ACCESSORY SUBMITTAL FOR

Fiji Temple Remodel

103, 107, 109, 122,129, E125, E123 (2), E111 (4)

103, 107, 109, E125,

109, 128, 103, E111

103, 109, 128, E111 (4)

KohlerTraditional TowelRing K-208-BNfor E122 andE110. UseBradley 9334 forCustodial E108.

list locations

list locations

Kohler FairfaxDouble RobeHookK-12153-BN list location

Hair Dryers nolonger needed onthe project

NEED TWO MOP HOOKS ABOVESINK. SEE D3/A110.3.

9934

Confirm Length

Coordinate with Drapery installer. Field Measureto confirm width

2 needed Folding counter mirrors to be wall-to-wall, as wellas the side walls. See A2/A106.6 and B1/A107.6

list locations

© 2008 Bradley CorporationP.O. Box 309, Menomonee Falls, WI 53052-0309

Phone: 800.BRADLEY (800.272.3539) Fax: 262.253.4161bradleycorp.com

522Toilet Tissue Dispenser

Washroom Accessories Document No. 8500

Orders composed of products indicated as BradEX® will be available to ship in three days after receipt of order at the factory. There is no pricing penalty for this service from Bradley.

This information is subject to change without formal notice.

Always consult local and national codes for proper installation guidelines.Conformity and compliance to local and national codes is theresponsibility of the installer. 9-30-2008

10-1/2"(267 mm)

4-1/4"(108 mm) 3"

(76 mm)

3"(76 mm)

1-3/16"(30 mm)

2-7/16"(62 mm)

Model 522 — BradEX®

Controlled DeliveryDual Roll (For Single Roll see Model 505)

Product Materials UNIT: diecast zinc. Copper and nickel polished chrome-plated finish.

Capacity Two standard core toilet tissue rolls through 5" in diameter and 4-1/2" wide.

Operation Push button unlocks support arms to permit servicing of unit. Tension spring on stationary arm controls paper delivery.

InstallationVerify all rough-in dimensions prior to installation. Secure to wall with mounting screws (included) at holes provided.

Guide Specification Surface-mounted toilet tissue dispenser shall be chrome-plated diecast zinc and hold two standard core toilet tissue rolls. Tension spring controls paper delivery.Overall dimensions: 10-1/2"W x 2-7/16"H x 4-1/4"D.


234Towel Dispenser/Waste Receptacle


This information is subject to change without formal notice. 10-6-2009



Feature Suffi x

Hinged cover -35

Large capacity waste receptacle — 18 gal. (Not ADA compliant)

-36

Hinged cover with push fl ap door -65

Vinyl Liner Part #P11-004

Flush-Mount Waste Receptacle Part #MMO-PS902635

15¼"(387mm)

56"(1422mm)

2½"(64mm)

4¼" Typ.(108mm)

18"(457mm)

4¾"(121mm)

7¼"(184mm)

23"(584mm)

541⁄8"(1375mm)

Optional Features

HINGED COVER WITHPUSH FLAP DOOR -65

HINGED COVER -35

Model 234 — Recessed BradEX®

(recesses 4"; projects 4¾") Model 234-10 — Semi-Recessed BradEX®

(recesses 2"; projects 6¾") Model 234-11 — Surface-Mounted BradEX®

(projects 8¾") Standard Series — Satin Finish

C-Fold/Multi-Fold Towels

Product DetailsCABINET: 22 gauge stainless steel with exposed surfaces in architectural satin finish. Welded construction with seamless cor ners and burr-free edges.FLANGE: 22 gauge stainless steel with exposed surfaces in ar chi tec tur al satin finish. One-piece seamless con struc tion, 1" wide with ¼" return.DOOR: 18 gauge stainless steel. Warp resistant, with full length piano hinge and tumbler lock keyed like other Bradley units.TOWEL DISPENSER: 22 gauge stainless steel. Rolled edge on dispenser opening.WASTE RECEPTACLE: heavy duty 22 gauge stainless steel. All welded construction. Secured to cabinet with tumbler lock keyed like other Bradley units.LINER: (optional) heavy duty stitched vinyl coated nylon. Part # P11-004.OPTIONAL HINGED COVER: 22 gauge stainless steel with exposed surfaces in architectural satin finish. Heavy duty stainless steel piano hingeOPTIONAL PUSH-FLAP DOOR: 22 gauge stainless steel with exposed surfaces in architectural satin finish. Heavy duty stainless steel piano hinge. Self-closing door is embossed PUSH.

CapacityTowel Dispenser — 800 multi-fold or 600 C-fold paper towelsWaste Container — 12 gal. (1.6 cu. ft.)

OperationTowel dispenser holds multi-fold or C-fold towels without use of special adapter. Receptacle removable for servicing by unlocking waste container.

InstallationVerify all rough-in dimensions prior to instasllation. Recessed unit requires rough wall opening 15¾"W x 54½"H x 4"D (Semi-recessed unit only 2" deep). Secure with mounting screws (included) at holes provided. Shim at screw points as required. Surface-mounted units must have holes drilled by installer. Mounting screws are included.

Guide SpecificationRecessed combination towel dispenser and waste receptacle shall be fabricated of 22-gauge stainless steel with exposed surfaces in satin finish. Warp-free towel cabinet door equipped with piano hinge and secured by tumbler lock. Towel dispenser capacity 800 multi-fold or 600 C-fold towels. Re mov able 12 gal. stainless steel waste re cep tacle. Reusable vinyl liner is optional.

Overall dimensions: 171⁄8"W x 56"H x 8¾"D.

ADA CompliantConsult local and national accessibility codes for proper installation guidelines.

Conformity and compliance to local and national codes is the responsibility of the installer.

171⁄8"(435mm)

313⁄16"(97mm)

367⁄16"(926mm)



812Grab Bar

This information is subject to change without formal notice. 11-10-2009


1½" O.D. heavy duty stainless steel grab bar with concealed mounting:

Product Materials FLANGES: 31⁄8" dia. 13 gauge stainless steel.ESCUTCHEONS: 22 gauge stainless steel. One-piece drawn construction with exposed surfaces in architectural satin fi nish. Snap over fl anges to conceal mounting screws.TUBING: 1½" O.D. 18 gauge stainless steel, seamless construc tion with exposed surfaces in architectural satin fi nish. Bent ends of tubing pass thru the fl anges and are welded for maximum strength. Intermediate supports are contour cut and joined by welding to form an integral part of the grab bar. All exposed welds ground and polished to blend. Mandrel bending process maintains uniform bar diameter. Return provides 1½" stan dard safety clearance between wall and bar.

Strength When properly mounted, all Bradley heavy duty grab bar systems meet or exceed the requirements of ANSI Standard A117.1, the ADA and ABA Accessibility Guidelines for Buildings and Facilities (ADAAG), and the Uniform Federal Accessibility Standard (UFAS).

Installation Verify all rough-in dimensions prior to installation. Secure to wall where adequate in-wall backing exists. Use bar as template to locate mounting holes. Drill holes and set anchors as appropriate. Mount grab bar and secure mounting screws. Snap escutcheons into place. For information on Bradley grab bar mounting kits, please visit bradleycorp.com.

Optional Features

BradEX® ModelsConfi guration

NumberShipping Data Confi guration

NumberShipping Data

Cu. Ft. Wt. Lbs. Cu. Ft. Wt. Lbs.

001-18"★ 0.14 2 001-42"★ 0.15 4

001-24"★ 0.14 3 001-42"-10★ 3.14 37.67

001-30" 0.15 3 001-48" 0.25 4

001-36"★ 0.15 3 059** 2.85 7

001-36-10★ 2.40 30.46

NOTE: These units must ship via common carrier.** 059 36" x 52" Standard Dimensions.★ Indicates available Safety Grip. BradEX®

* 1½” WALL CLEARANCE REQUIRED UNDER MOST BUILDING DESIGN CODES

* 1½" (38mm)


MOUNTING HOLES

FLANGE OF 13 GAUGE STAINLESS STEEL

BAR WELDED TO FLANGE

FOR MAXIMUM STRENGTH

MANDREL BENDING PROCESS MAINTAINS

UNIFORM BAR DIAMETER

(NO. 4) SATIN FINISH WILL NOT SCRATCH

HANDS OR CATCH DIRT

ESCUTCHEON SNAPS OVER FLANGE TO CONCEAL MOUNTING SCREWS

18 GAUGE STAINLESS STEEL

FLANGE ESCUTCHEON

5⁄8" (16mm)

3¼" (83mm)

CONCEALED

STANDARD FINISH

SAFETY-GRIP FINISH



Features Suffi x

Safety-grip fi nish -2

High-polish fi nish -4

Safety grip with high-polished fi nish -7

Guide Specifi cation Grab bar shall be fabricated of satin fi nish stainless steel with concealed mounting fl anges in sizes and con fi g u ra tions as indicated. Install with Bradley Mounting Kits as indicated.




Always consult local and national codes for proper installation guidelines.Conformity and compliance to local and national codes is the responsibility of the installer. 9-30-2008

4017Napkin/Tampon Vendor

Model 4017 — Recessed Model 4017-10 — Semi-Recessed

(recesses 4", projects 2¾") Model 4017-11 — Surface-Mounted

(projects 6¾")

US Currency: Free — 40 10¢ — 42 25 ¢ — 45 50 ¢ — 43 $1.00 — 44

Foreign Currency: ¤ .50 — E43 Contemporary Series — Satin Finish

Product Materials CABINET: 22 gauge stainless steel with exposed surfaces in architectural satin finish. Welded construction with burr-free edges.DOOR: 18 gauge stainless steel with exposed surfaces in architectural satin finish, with full length piano hinge and two tumbler locks keyed like other Bradley units. COIN BOX: inside cabinet is 22 gauge stainless steel, secured by a separate lock keyed differently than door locks. Coin mechanisms are available with free, $.10, $.25, $.50, $1.00 or ¤ .50 operation. Two mechanisms are included. Coin mechanisms may be replaced in the field without removing cabinet from wall.

Capacity 30 napkins (3" x 4¼" x 1" or smaller) and 28 tampons (51⁄8" long x ¾" dia. or smaller). Dispenses all popular brands.

Operation Insertion of coin permits clockwise rotation of handle to dispense product. Will not accept coin when vendor is empty. Access door allows servicing of unit.

InstallationVerify all rough-in dimensions prior to installation. Recessed unit requires rough wall opening 12½"W x 263⁄8"H x 61⁄8"D (Semi-recessed unit only 4" deep). Insert cabinet into wall opening and secure to framing with screws (not included) at holes pro vid ed. Shim at screw points as required.


Guide Specification Recessed combination napkin/tampon vendor shall be fabricated of 22 gauge stainless steel with exposed surfaces in satin finish. Door shall be fabricated of 18 gauge stainless steel with a full-length piano hinge and two tumbler locks keyed like other Bradley units. Two coin mechanisms shall permit dispensing thirty napkins and twenty-eight tampons and be available with free, $.10, $.25, $.50, $1.00 or ¤ .50 coin operation.

213⁄16" (71mm)

3¼"(83mm)

141⁄8"(359mm)

½"(13mm)

117⁄8"(302mm)

281⁄8"(714mm)

411⁄16"(117mm)

257⁄8"(657mm)

63⁄16"(208mm)

61⁄6"(154mm)





Always consult local and national codes for proper installation guidelines.Conformity and compliance to local and national codes is the responsibility of the installer. 9-30-2008

4722-15Napkin Disposal


Model 4722-15 — Surface-Mounted BradEX®

Standard Series — Satin Finish Single End Compartment

Product Materials CABINET: 22 gauge stainless steel with exposed surfaces in architectural satin finish. All welded construction. PUSH FLAP DOOR: 22 gauge stainless steel with exposed surfaces in architectural satin finish. Heavy-duty stainless steel piano hinge. Self-closing flap door. WASTE CONTAINER: 22 gauge stainless steel with tumbler locks keyed like other Bradley units.

Capacity1.5 gal (0.2 cu. ft.)

Operation Waste container removable from one side with finger grip. Furnished with waxed paper liner. Additional liners available from Bradley.

Installation Verify all rough-in dimensions prior to installation. Secure unit to wall with mounting screws (included) at holes provided.

Guide Specification Surface-mounted napkin disposal shall serve one toilet compartment and be fab ri cat ed of 22 gauge stainless steel with exposed surfaces in satin finish. Self-closing push flap door and stainless steel removable receptacle with tumbler lock.

Overall dimensions: 10-3/4"W x 15-1/8"H x 4"D.

1-1/16”(27 mm)

1-1/16”(27 mm)

8-9/16”(217 mm)

10-3/4”(273 mm)

9-9/16”(243 mm)

15-1/8”(384 mm)

4”(102 mm)

Features• Stainless steel construction

• Intended for use with kitchen sinks

• Refillable from the top side

• 16 fluid ounce (.5 L) capacity

• 3-1/8″ (80 mm) high pump

• 3-13/16″ (97 mm) long spout

Codes/Standards ApplicableSpecified model meets or exceeds the following:

• None applicable

SOAP/LOTION DISPENSERK-7346

Colors/Finishes• BS: Brushed Stainless Steel

• S: Polished Stainless Steel

Specified Model:

Model Description Colors/FinishesK-7346 Soap/lotion dispenser ❑ BS ❑ S

PRODUCT SPECIFICATIONThe soap/lotion dispenser shall be of stainless steel construction. Product shall feature 3-1/8″ (80 mm) high pump, 3-13/16″ (97mm) long spout, and is refillable from the top side. Product is intended for use with kitchen sinks and has a 16 fluid ounce (.5L) capacity. Soap/lotion dispenser shall be Kohler Model K-7346-___.

HIRISETM

Page 1 of 21069134-4-C

USA/Canada: 1-800-4KOHLER(1-800-456-4537)www.kohler.com

Installation NotesInstall this product according to the installation guide.

3-1/8"(79 mm)

2-1/2"(64 mm) Max

3-13/16"(97 mm)

2" (51 mm)

1-1/16-16UNC - 2A

Product Diagram

HIRISETM

HIRISETM SOAP/LOTION DISPENSERPage 2 of 21069134-4-C

AccessoriesSatin Stainless Accessories

© 2015 BradleyP.O. Box 309, Menomonee Falls, WI 53052-0309

800 BRADLEY (800 272 3539) +1 262 251 6000bradleycorp.com

Orders composed of products indicated as Bradex® will be available to ship in three days after receipt of order at the factory. There is no pricing penalty for this service from Bradley.

Page 1 of 2 4/28/2014This information is subject to change without notice.Bradley_SatinStainlessAccessories

Satin Finish Stainless Steel

Surface-Mounted

Vandal-Resistant Escutcheons

Product MaterialsUNITS: No. 4 satin finish stainless steel.ESCUTCHEONS: 2"W x 2"H, where applicable, unless otherwise indicated.

9014 Bradex®

Soap Dish with Drain Holes

9014-63Soap Dish without Drain Holes, 4¼"W x 4"D

9014-USDomestic

9044 Bradex®

Tumbler and Toothbrush Holder4¼"W x 4"D

9044-USDomestic

9054¾" Square Towel Bar 18"W Bradex®

24"W Bradex®

30"W

9054-1200US12"W Domestic




91048" Deep Towel Shelf 18"W 24"W

9111 Clothes Hook, 1"W x 2¼"H x 1½"D

9104-908" Deep Towel Shelf with Towel Bar 18"W 24"W

9065¾" Round Towel Bar, projects 3" 18"W Bradex®

24"W Bradex®

30"W


InstallationVerify all rough-in dimensions prior to installation. Secure mounting bracket to wall with screws (included) at holes provided. With escutcheon set screw on the bottom, align top end of escutcheon plate interior to top of wall bracket. Pivot escutcheon plate(s) down in position and tighten concealed set screw to lock unit in place.

Guide SpecificationSurface-mounted accessory shall be fabricated of heavy gauge No. 4 satin finish stainless steel.

AccessoriesSatin Stainless Accessories




Page 2 of 2 4/28/2014This information is subject to change without notice.Bradley_SatinStainlessAccessories

9314 Bradex®

Towel Hook, projects 47⁄16"

9314-USDomestic

9334Towel Ring, projects 23⁄8"

9334-USDomestic

9134 Bradex®

Hat and Coat Hook, projects 25⁄8"

9134-USDomestic

90945" Deep Shelf, projects 6¼" 18"W 24"W

9114 Bradex®

Single Robe Hook, projects 2"

9114-USDomestic

9124 Bradex®

Double Robe Hook, projects 2¼"

9124-USDomestic

USE THIS RING IN THE CUSTODIALCLOSET. SEE D4/A110.3.

9933, 9934Utility Shelf




Page 1 of 1 2/20/2013This information is subject to change without notice.Bradley_UtilityShelf_9933_34

Model 9933 – 4 Hooks/3 Holders Bradex®

Model 9934 – 5 Hooks/4 Holders

Product MaterialsSHELF AND BRACKET: 18 gauge stainless steel with exposed surfaces in architectural satin finish.HOOKS: 14 gauge stainless steelHOLDERS: spring-activated rubber cams on plated steel retainers. Will hold a mop or broom handle with a diameter between 5/8" and 1".

OperationWeight of mop or broom holds handle in place.

InstallationVerify all rough-in dimensions prior to installation. Secure to wall with mounting screws (included) at holes provided.

Guide SpecificationSurface mounted utility shelf shall be fabricated of 18 gauge stainless steel in satin finish. Hooks shall be of 14 gauge stainless steel. Holders shall be with spring-activated rubber cams.

* EQUALLY SPACED

13¾"(349mm)

8"(203mm)

10"(254mm)

10"(254mm)

10"(254mm)

3" TYP.(76mm)

2"(51mm)

*¾"

(19mm)

6"(152mm)

¼" (6mm) DIA. – MOUNTING HOLES

1"(25mm)

6"(152mm)

2¼"(57mm)

¾"(19mm)

9933 34" (864mm)9934 44" (1118mm)

*



953, 9531Shower Curtain Rod



This information is subject to change without notice.

Always consult local and national codes for proper installation guidelines.Conformity and compliance to local and national codes is theresponsibility 4-1-2010 .rellatsni eht fo

gnitnuoM desopxE

.D.O "1 – 359 ledoM 36" BradEX®

42" 48" 60" BradEX®

72"

.D.O "¼1 – 1359 ledoM 36" BradEX®

42" BradEX®

48" BradEX®

60" BradEX®

72"

For 72" lengths and greater, model 9522 Shower Rod Ceiling Support is required! Must specify distance from the ceiling!

Product MaterialsFLANGES: 22 gauge stainless steel. One-piece drawn construction with

.hsin fi nitas larut cet ihcra ni secafrus desopxeTUBING: desopxe htiw noit curts noc sselmaes ,leets sselniats eguag 81 surfaces in architectural satin fi nish.

InstallationVerify all rough-in dimensions prior to installation. To properly engage rod

retrohs "¼ yl etam i xorp pa naht ssel on eb tsum htgnel dor ,segna fl troppus nithan wall opening. Secure one fl ange to wall with mounting screws (included) at holes provided. Align mounting holes vertically. Slip opposite fl ange over rod and secure to opposite wall with rod in place.

Optional Featuresx fifuSerutaeF

Bright polished fi nish -4

Guide Specifi cationShower curtain rod shall be fabricated of 18 gauge stainless steel in satin fi nish. Flanges shall be of 22 gauge stainless steel.

(2) – #10 x 2"PHILLIPS OVAL HD.

SHEET METAL SCREW

SHOWER ROD

FLANGE (EXPOSED)

WALL

“L”

CONFIRM LENGTH

9533, 9534, 9535, 9537Shower Curtain





Always consult local and national codes for proper installation guidelines.Conformity and compliance to local and national codes is theresponsibility of the installer. 1-20-2011


Model 9533 Antimicrobial Vinyl Shower CurtainGuide Specifi cation

Shower curtain 6 gauge vinyl material with hemmed top edges and aluminum grommets on 6” centers. White only.Vinyl Shower Curtain shall be BradleyModel 9533-__________"W x __________"H (insert size).

Model 9534 Duck Shower CurtainGuide Specifi cation

Shower curtain is 8-oz. 100% cotton duck material with hemmed top edges and chrome-plated nickel grommets on 6" centers. White only.Duck Shower Curtain shall be BradleyModel 9534-__________"W x __________"H (insert size).

Model 9533 and Model 9534 Shower Curtains have a tolerance of +/- 1" length and +/- 2" width, all sides hemmed.

Model 9535 & 9537 Antimicrobial Shower CurtainGuide Specifi cation

Shower curtain is 10-oz. nylon-reinforced antimicrobial PVC vinyl fabric (fl ameproof, stain resistant, self-deodorizing) and furnished with aluminum grommets on 6" centers. Shower curtain is .014" thick and all sides are hemmed. Ideal for hospital applications. Model 9535 is Green. Model 9537 is White.Antimicrobial Shower Curtain shall be BradleyModel 9535, 9537-_____"W x __________"H (insert size).

9533 BradEX® ModelsWidth Height Overall

Dimensions(Inches)

Overall Dimensions(Millimeters)

# of 9536 ShowerHooks Required

(Order Separately)

36" (914 mm) 72" (1829 mm) 36 x 72 914 x 1829 7

42" (1067 mm) 72" (1829 mm) 42 x 72 1067 x 1829 8

72" (1829 mm) 72" (1829 mm) 72 x 72 1829 x 1829 13

Other sizes available upon request.

9537 BradEX® ModelsWidth Height Overall

Dimensions(Inches)

Overall Dimensions(Millimeters)

# of 9536 ShowerHooks Required

(Order Separately)

42" (1067 mm) 72" (1829 mm) 42 x 72 1067 x 1829 8

48" (1219 mm) 72" (1829 mm) 48 x 72 1219 x 1829 9

72" (1829 mm) 72" (1829 mm) 72 x 72 1829 x 1829 13

Other sizes available upon request.

Model 9533 – Antimicrobial Vinyl Shower Curtain (White) BradEX®

Model 9534 – Duck Shower Curtain (White)

Model 9535 – Antimicrobial Shower Curtain (Green)

Model 9537 – Antimicrobial Shower Curtain (White) BradEX®

9535 and 9537 Width Tolerances

Width Tolerance

36" (914mm) +/- 3"

42" (1067 mm) +/-1"

48" (1219 mm) +/-1"

54" (1372 mm) +/-5"

72" (1829 mm) +/-3"

Length tolerance is +/-1"

962Stainless Steel Baby Changing Station




Page 1 of 1 4/25/2011This information is subject to change without notice.Bradley_BabyChanger_962_11

Model 962 – Recess-Mounted Bradex®

Model 962-11 – Surface-Mounted Bradex®

Meets relevant sections of the CPSIA to the extent possible.

Meets or exceeds ASTM F2285 Safety Specification for Commercial Changing Stations.

Product MaterialsBODY: bacterial-resistant polyethylene with brushed 20 gauge stainless steel exterior. Rated to support static load of 250 lbs, tested to 390 lbs. Pneumatic gas shock mechanism to ensure smooth, safe open and close motions.MOLDED DUAL LINER DISPENSER: holds approx. 50 per dispenser (liners sold separately).SAFETY BELT: with cam-buckle, adjustable with one hand.

WARNING: Be sure to use reinforced backing behind wall where mounting screws or anchoring devices are installed to ensure adequate support for the baby changing station. All anchoring devices (supplied by installer) must be appropriate for specific wall construction. Severe personal injury and/or property damage may result from improper mounting.

37-1/2" (953mm)

21-5/8" (549mm)

1" (25mm)

Plastic Changer with Stainless Steel Encasement

4" (102mm)

1" (25mm)

1" (25mm)

31" (787mm) AFF recommended mounting height.

Recessed unit protrudes 13¼" (337mm) when open.NOTE: Surface-mount into studs at 32"

(813mm) on center. See “Recommended Blocking” below for recess-mount.



Service Parts AvailablePart Number Description

P11-021 Liners (100% bio-degradable), Case of 500



9569Reversible Phenolic Shower Seat



This information is subject to change without notice. 3-9-2010

ADA Compliant

Color – White BradEX®

Product MaterialsFRAME: satin fi nish stainless steel; 18 gauge 1" diameter tubing with 1½" HDPE support bars.MOUNTING FLANGES: 7 gauge satin fi nish stainless steel with three mounting holes provided in each fl ange for installation.LOWER SUPPORT BRACKET: 16 gauge satin fi nish stainless steel.SEAT: ½" thick solid phenolic. White matte fi nish Melamine bonded onto the phenolic for color. All exposed edges are machined smooth to a uniform dark fi nish. Reversible in fi eld to be right or left hand.

OperationHinged seat folds up and out of the way when not in use. When properly installed, seat can support up to 400 lbs. – static load.

InstallationVerify all rough-in dimensions prior to installation. Provide concealed backing or anchors as specifi ed by architect before fi nished wall is applied. Secure to wall with mounting screws (not included) at holes provided. Locate mounting holes at appropriate height above fi nished fl oor to meet seat height requirement. Secure lower support bracket to wall at appropriate location. Seat is reversible, may be made into a right hand seat.

22"(559mm)

5¼"(133mm)

23⁄8"(60mm)

13⁄8"(35mm)

173⁄8"(441mm)

17" (432mm) to 20"(508mm)

49⁄16"(116mm)

34½"(876mm)

17¼"(438mm)

13½"(35mm)

273⁄8" (695mm) to 303⁄8" (772 mm)

7⁄8"(22mm)

1¼"(32mm)

2½"(64mm)

1¾"(44mm)

109⁄16"(268mm)

211⁄8"(537mm)



How to Specify Color(See Color Selection Guides)

9 5 6 9 T0 0 0

MODEL

ALWAYSZERO

CHOOSECOLORCODE

Guide Specifi cationReversible folding white phenolic shower seat shall be ½" thick phenolic with Melamine bonded to its phenolic core. Secured to the frame of 18 gauge, 1" diameter tubing, and 1½" HDPE support bars. Support leg contained in 16 gauge lower support bracket. Shower seat must meet or exceed ADA guidelines.Overall dimensions: 34½"W x 22"D x ½" thick.

Standard SelectionsSPECIFY COLOR

Specify color ____________________(See color chart in back of catalog)

343⁄8" (873mm) to 373⁄8" (949 mm)

BLOCKING TO BE 24" W. X 18" H.

Ironfix™ Ironing Board – Wall Mounted

Item No.: 568.66.700

MountingInstructions

595(23 7/16")

140(5 1/2")

365(14 3/8")

326(12 7/8")

185(7 1/4")

120(4 3/4")

950(37 3/8")

300(11 7/8")

985(38 7/8")

525(20 5/8")

110(4 3/4")

3901 Cheyenne DriveP.O. Box 4000

Archdale, NC 272631-800-423-3531www.hafele.com

185(7 5/16”)

326(12 7/8”)

15 (5/8”)

15(5/8”)

252528(1”)(1”)(1 1/8”)

20(13/16”)

12(1/2”)

6(1/4”)

6(1/4”)

252528(1”)(1”)(1 1/8”)

Dimensions in mmInches are approximate

Cover



P10-696Circular Waste Chute




Always consult local and national codes for proper installation guidelines.Conformity and compliance to local and national codes is theresponsibility 4-1-2010 .rellatsni eht fo

BradEX®

Product MaterialsWASTE CHUTE: heavy gauge stainless steel with exposed surfaces in polished fi nish. Drawn one-piece seamless construction.

InstallationVerify all rough-in dimensions prior to installation. Countertop rough-in 6" diameter hole.

Guide Specifi cationCircular Waste Chute shall be fabricated of stainless steel of drawn seamless construction and bright polished fi nish.Overall dimensions: 6-3/4" diameter x 3-1/2"D.

6-11/16" DIA.(170 mm)

5-3/4"(146 mm)

3-1/2"(89 mm)

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 5/09 Printed in U.S.A.The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2009 by Bobrick Washroom Equipment, Inc.

Technical Data

4''100mm

10-3/4''275mm

Towel Retainers Towel Tray12-3/4''325mmMounting Tabs (4)

10-7/8''275mm

1/4''6mm

11-5/16''285mm

6''150mm

4-1/8''105mm

Rec

om

men

ded

Mo

un

tin

g H

eig

ht

Off

Flo

or

Fo

r U

niv

ersa

l / B

arri

er-F

ree

Des

ign

34''

865

mm

6''150mmWhen

Towel TrayFully Loaded

materials:Flange — 18-8 S, type-304, 22-gauge (0.8mm) satin finish stainless steel. 1/4" (6mm) 90° return for maximum rigidity.

Paper Towel Dispenser — 18-8 S, type-304, 22-gauge (0.8mm) satin finish stainless steel. All-welded construction. Equipped with two hinged towel retainers and a spring-loaded towel tray. Capacity: 300 C-fold or multifold paper towels.

operation:Paper towel dispenser accommodates C-fold and multifold paper towels without adjustment or adapters. Patented push‑through design allows loading from the top by pushing towels downward into dispenser through the two hinged towel retainers.Designer's Notes: Housing below countertop to conceal paper towel dispenser is not included with unit — must be furnished by others. Paper towel dispenser may be mounted in vertical surfaces of countertop also, including aprons, skirts, or front of cabinets.

installation:Unit is designed for installation in countertop. Mount unit through a cutout specially ordered from countertop manufacturer or field cut. Dimensions of cutout are to be 12-1/4" wide x 4-1/2" high (310 x 115mm). Adjustable mounting tabs accommodate mounting thicknesses from 3/4" to 1-1/2" (19 to 38mm). For complete installation instructions, see Form No. 526-69, packed with each shipment; also available in advance on request.NOTE: 17" (430mm) minimum clearance below mounting surface is required to allow for full extension of fully loaded towel tray.

specification:Paper towel dispenser for mounting in countertops shall be type-304 stainless steel with all-welded construction; exposed surfaces shall have satin finish. Flange shall have 1/4" (6mm) 90° return. Paper towel dispenser shall be equipped with two hinged towel retainers and spring-loaded towel tray; capacity shall be 300 C-fold or multifold paper towels. Manufacturer's service and parts manual shall be provided to the building owner/manager upon request.

Countertop-Mounted Paper Towel Dispenser shall be Model B-526 of Bobrick Washroom Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; and Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.

Rough Countertop Cutout12-1/4" (310mm) wide4-1/2" (115mm) high

3/4" to 1-1/2" (19 to 38mm) mounting thickness17" (430mm) minimum clearance below mounting surface

trimlineseries™countertop paper towel Dispenser

B-526

letter of transmittal 307

Documents