LEVEL 1 LADDER SAFETY EQUIPMENT

www.laddersafetysystems.co.uk

LADDER SAFETY KITLEVEL 1

Level 1 Equipment is used on leaning access ladders, where the operative can safely ascend and descend the ladder maintaining 3 points of contact at all times.

• Cavity Wall Insulation• Cable Clipping• Security Equipment Installation • Pest Control - Wasp nets etc

The principal of the level 1 system is simplicity and compliance.You secure the ladder to the wall and secure the operative to the ladder.

Step 1 Step 2 Step 3 Step 4

Fit harness and short lanyard(cowstail)

Secure the ladder to the wall at ground level, using a re-usable eyebolt, strap and yolk

Climb the ladder and secure yourself to the ladder rung with the cowstail

Once Secured the user can remove both hands to work

Level 1 Equipment Includes

• Fully Waterproofed body harness, with front and rear attachment points.• Adjustable length cowstail with large snaplock and small autolocking karabiner.• Reusable eyebolt (sizes available 12mm, 20mm, 22mm & 26mmØ)• Ladder Strap with cam lock• Ladder Yoke• Drill Bandolier• Heavy Duty Storage bag

Level 1 System Applications (if used with tool carriers/ tool belts/ drill bandoliers)

LEVEL 2 LADDER SAFETY EQUIPMENT

www.laddersafetysystems.co.uk

HEIGHT SAFETY SERVICESLEVEL 2

Level 2 Equipment is used on leaning access ladders, when the operative cannot safely ascend and descend the ladder maintaining 3 points of contact at all times.

• Gutter Repair, Replacement, Cleaning &Painting• Fascia Repair, Replacement &Painting• Window Repairs, Painting• Security Equipment Installation / Maintenance• Brick / Pointing Repairs / Roughcast Repairs• Satellite & Aerial Installation• Gas Flue Fitting / Overflow Fitting/Repairs • Pole mounted CCTV Camera Maintenance

The level 2 system follows the same principal of the Level 1 equipment (secure ladder to wall, secure operative to ladder) with the addition of a rope and rope grab acting as a running line. The rope and grab enables the user to carry equipment in one hand, while ascending or descending the ladder.

Step 1 Step 2 Step 3 Step 4

Secure ladder to wall and fit harness

Fit rope grab to rope at ground level

Climb ladder maintaining three points of contact

Once in position, slide robe grab as high as comfortably possible, and the user can now remove both hands to work

Level 2 Equipment Includes• Fully Waterproofed body harness, with front and rear attachment points.• Adjustable length cowstail with large snaplock and small autolocking karabiner.• Rope Grab• 11mmØ Kernmantle Rope with large snaplock Karabiner• Reusable eyebolt (sizes available 12mm, 20mm, 22mm & 26mmØ)• Ladder Strap with cam lock• Ladder Yoke• Drill Bandolier• Heavy Duty Storage bag

Level 2 System Applications

LEVEL 3 LADDER SAFETY EQUIPMENT

www.laddersafetysystems.co.uk

HEIGHT SAFETY SERVICESLEVEL 3

Level 3 Equipment has been designed to achieve safe access from the ground, onto roof ladders.

Applications for Short Duration / Low Risk working on pitched roof's.

• Roof Tile Replacement Ridge Tile Replacement

• Chimney Repairs (pointing, lead and small patching repairs)

• Satellite & Aerial Installation / Removal

• Gas Flue Fitting / Repair / Removal

Using the level 3 system the operative can safely ascend and descend the ladder maintaining 3 points of contact at all times.

The level 3 system follows the same principal of the Level 1 & 2 equipment (secure ladder to wall, secure operative to ladder)

with the added ability to secure the roof ladder to the access ladder and safely transfer from either. The rope and rope grab again enables the user to carry equipment in one hand, while ascending or descending the ladder.

This system is used extensively for the installation of Sky TV satellite dishes, digital aerials, gas and heating systems, social housing repair teams, roofers and so on.

Step 1 Step 2 Step 3

The Level 3 system

Step 4 Step 5 Step 6

Secure ladder to wall, fit harness and rope grab to rope

Secure roof ladder to access ladder

Connect rope grab to rope on the roof ladder and transfer to roof ladder

Cimb roof ladder maintaining 3 points of contact

Climb access ladder to gutter line maintaining 3 points of contact and fit cowstail

Lift roof ladder into position

Level 3 Equipment Includes •Fully Waterproofed body harness, with front and rear attachment points.•Adjustable length cowstail with large snaplock and smallautolocking karabiner.•Rope Grab•11mmØ Kernmantle Rope with large snaplock Karabiner(1 or 2 rope option available)•Roof ladder Ratchet Strap•Reusable eyebolt(sizes available 12mm, 20mm, 22mm & 26mmØ)•Ladder Strap with cam lock•Ladder Yoke•Drill Bandolier•Heavy Duty Storage bag

SOLAR PVKIT

Get in touch with us: Address:

www.laddersafetysystems.co.uk

SOLAR PVKIT

Tetra Working at Height

Unit 7, SecuriparcWimsey WayAlfretonDE55 4LS

Get in touch with us: Address:Training Centre

Tel: 01773 606373

Fax: 01773 606372 Email: heightsafety@tetrasystem.co.uk

Tetra have been working with Solar Panel Install Teams, Operations Teams and Safety Managers around the country, listening to the safety and operational issues each department has when installing solar PV panels on roofs.As with our extensive range of Ladder Safety Systems, we’ve made our Solar PV Work Restraint System very simple to use, train and inspect.

The Solar PV adjustable lanyard has been designed to provide a work restraint system that utilises the panel brackets and framework as attachment points. Used in conjunction with a collective edge protection system the adjustable lanyard still provides sufficient movement to work, but prevents the user from reaching a point where a fall could occur

Increased productivity from the install teams.

A considerable reduction of risk and time.

Candidate Training

Equipment Inspection Training

A simple safe method of installing panels on roofs,

which the installers are happy and comfortable with.

Tetra can offer two options for the supporting training

on our PV Fall Restraint System.

Please note – The Tetra PV Restraint System must always be used

in conjunction with a collective edge protection system.

Training

The basic principal is using the panel brackets and framework as your restraint anchor point. The adjustable restraint lanyard provides sufficient movement to work, but prevents the user from reaching a point where a fall could occur.