lics systems and lics system network
TRANSCRIPT
MKT-CH / 1
Product Overview LMS
Martin Plachta
Product Management
Phone: 0049 7181 8002 170 Mobile: 0049152 56714 224
Email: [email protected]
Innovative Systems 2014 www.vossloh-schwabe.com
Urbach, 23.06.2014
MKT-CH / 2
2.
1. LiCS System
LiCS System Network – Light Controller IP
Contents
1.1 Light Controller L/LW , LS/LSW
1.2 Light Controller S
1.3 Light Controller XS
MKT-CH / 3
BMS – Building Mangement Systems
Multiple Room
Solutions
Single Room
Solutions
Gateway/
Translater
Light Management Systems and Interfaces
– System
MKT-CH / 4
– System
Trends
MKT-CH / 5
Solutions for different applications
For…
• Single luminaires or small
areas
• Control up to 8 luminaires
• 1 MultiSensor
• Built-In
For…
• Complete halls
• Control up to 64 luminaires
• Up to 36 Sensors
• Independant installation
For…
• Complete halls
• Control up to 64 luminaires
• Up to 36 Sensors
• 16 groups
• Cabinet installation
In Luminaire Solution
Light Controller XS
Single room solution
Light Controller S Multiple room solution
Light Controller L&LW/ LS&LSW
– System
Kinds of application
MKT-CH / 6
The VS Light Controller works with the international DALI standard for lighting that makes it possible to
connect DALI-compatible operating devices made by different manufacturers.
Up to 64 DALI operating devices can be combined individually in up to 16 groups. 16 different scenes
can be stored in each DALI operating device.
The VS Light Controller is designed for DIN rail mounting within a junction box.
The Light Controller features a display panel and rotary push-button to enable user-friendly system
configuration directly at the Light Controller unit.
Light Controller L/LS and Light Controller LW/LSW
– System
VS Light Controller L/LW and LS/LSW
MKT-CH / 7
1st control option
VS Light Controller L/LW and LS/LSW
MKT-CH / 8
Six individually configurable push-buttons can be connected to the Light Controller. (Parallel operation possible)
Push-button modes
(1 individual address, 1 group or all
connected DALI devices together):
• Push function
(short press: on/off | long press: dim up/down)
• On/Off function
• Scene activator (only L/LW)
• Timer function (10 sec up to 90 min.)
• Dim up/down
• Central On/Off
– System
L
N P
E
Up to 64 DALI control gears
Mains
6x Push
button
DA
LI
Balla
st
DA
LI
Balla
st
IDALI
DA
LI
Ba
llast
DA
LI
Ba
llast
Main Advantages:
• Flexible functions (Display)
• Integrate cheap push-buttons
• No synchronisation problem with „Push“
function
(mixed EB installations possible)
VS Light Controller L/LW and LS/LSW
MKT-CH / 9
2nd control option
VS Light Controller L/LW and LS/LSW
MKT-CH / 10
Industrial Sensors can be connected to the system.
– System
L
N P
E
Mains
6x Push
button
IDALI
Brigh
tne
ss
Se
nso
r
DA
LI
Ba
llast
DA
LI
Ba
llast
S1 S1
DA
LI
out
DA
LI
in
DA
LI
out
DA
LI
in
VS
Exte
nd
er
IDALI
NO/NC
Relay
Mo
ve
me
nt
Se
nso
r
VS Light Controller L/LW and LS/LSW
MKT-CH / 11
Movement Sensor HB 65
• Movement Sensor
• IP65
• Up to 8m/12m frontal
• 2mA
Brightness Sensor IP 65
• Brightness Sensor
• IP65
• 4mA
• DALI loop
VS Light Controller L/LW and LS/LSW
– System
MKT-CH / 12
– System
L
N P
E
Mains
6x Push
button
IDALI
VS
Mo
ve
me
nt
Se
nso
r
DA
LI
Ba
llast
DA
LI
Ba
llast
S1 S1
DA
LI
out
DA
LI
in
DA
LI
out
DA
LI
in
VS
Exte
nd
er
IDALI
NO/NC
Relay
VS
Mu
lit
Se
nso
r
VS MultiSensors can be connected via the DALI bus.
The VS MultiSensor contents:
Light sensor:
Freely adjustable constant lighting levels.
Movement sensor: with 2 different modes:
System switches on/off automatically if movement is detected (or not).
System switches off if no movement is detected.
In both modes: Switch off time from 10 sec up to 90 min.
VS Light Controller L/LW and LS/LSW
MKT-CH / 13
– System
Basic LL
Light level
Pass LL
Pass LL = Basic LL time
Light level Act LL =100%
t1
Example: Factory
setting Act LL =100%,
t1 = 3min, Pass LL =
0, Basic LL = 0, t2 = 0
t1 t1 t1
time
Light level
Basic LL
100%
Pass LL
t1 t1 t1 t1 t2 t2 t2
Act LL
Example: Act LL = 80%,
Pass LL = 30%, Basic
LL = 10%, t1 = 3min, t2
= 1min
time
Act LL
t1 t1 t1 t2 t2 t2
100%
Example: Act LL =
80%, Pass LL = 40%,
t1 = 3min, t2 = 1min,
Basic LL = 0
t1
VS Light Controller L/LW and LS/LSW – Movement Detection (automatic)
MKT-CH / 14
– System
Basic LL time
Light level
Act LL
Pass LL
t1 t1 t1 t2 t2 t2
100%
Example: Act LL =
80%, Pass LL = 40%,
t1 = 3min, t2 = 1min,
Basic LL = 0
Pass LL = Basic LL time
Light level Act LL =100%
t1
Example: Factory
setting Act LL =100%,
t1 = 3min, Pass LL =
0, Basic LL = 0, t2 = 0
t1 t1 t1
time
Light level
Basic LL
100%
Pass LL
t1 t1 t1 t1 t2 t2 t2
Act LL
Example: Act LL =
80%, Pass LL = 30%,
Basic LL = 10%, t1 =
3min, t2 = 1min
VS Light Controller L/LW and LS/LSW – Movement Detection (semi-auto)
MKT-CH / 15
– System
• Planning Software for Electricians and Light planers • International operating company (Growing rate of new users yearly – about 10%) • Regular newsletters • Activities on exibitions worldwide • VS MultiSensors only (Information about Light Controller)
VS Light Controller L/LW and LS/LSW
MKT-CH / 16
Sensor modes
• Light Sensor
– System
06:00 07:00 08:00 09:00 15:00 16:00 17:00 18:00
500lx at
working
desk
10:00 12:00 11:00
100%
13:00 14:00
700lx at
working
desk
Electric light
Daylight
Daylight
Energy saving up
to 30% possible
with light
sensoring
60%
11/18
VS Light Controller L/LW and LS/LSW – Brightness Control
MKT-CH / 17
3rd control option
)))
)))
VS Light Controller L/LW and LS/LSW – EnOcean
MKT-CH / 18
– System
L
N P
E
Mains
6x Push
button
IDALI
VS
Mo
ve
me
nt
Se
nso
r
DA
LI
Ba
llast
DA
LI
Ba
llast
)))
Up to 16 Wireless
Transmitters
S1 S1
DA
LI
out
DA
LI
in
DA
LI
out
DA
LI
in
VS
Exte
nd
er
IDALI
NO/NC
Relay
VS
Mu
lit
Se
nso
r
The transmitters can be configured via the Light Controller LW with the same functions as
the standard push-buttons: push function, on/off, scene activator, timer function
EnOcean Modules can be integrated into the system. Also EnOcean suitable touch panels.
Same functionality, as wired push-button.
VS Light Controller L/LW and LS/LSW – EnOcean
MKT-CH / 19
Wireless Transmitter "Wall"
EnOcean technology
2-channel, 4-channel transmitter
Colours: pure white, charcoal-grey, aluminium
No holes, no batteries
No wires, no maintenance
Fixation with double-sided adhesive tape or screws
Wireless Transmitter "Hand"
EnOcean technology
2 - 12 channel transmitter
No batteries, no maintenance
Works like a remote control
– System
VS Light Controller L/LW and LS/LSW – EnOcean
MKT-CH / 20
Wireless Components with EnOcean technology
A so-called "Wireless Repeater" can be added to the system to increase the range between wireless
transmitter and the LW Light Controller. Without having to be configured, the repeater merely needs to
be activated in either one- or two-level mode.
))) )))
))) ))) )))
– System
Wireless Repeater "2 level"
90m
VS Light Controller L/LW and LS/LSW – EnOcean
MKT-CH / 21
After addressing the extender on the primary DALI line, on the secondary side (DALI output) it is now possible to
connect additional 64 DALI control devices which are working as 1 group. Extend the DALI-Bus restrictions to
another 300m.
– System
L N PE
Mains
6x Push button
IDALI
DA
LI
Balla
st
DA
LI
Balla
st
)))
Up to 16 Wireless
Transmitters
S1 S1
DA
LI o
ut
DA
LI in
DA
LI o
ut
DA
LI in
VS E
xten
der
IDALI
NO/NC
Relay
VS M
ulit
Sen
sor
Main Advantages of Extender: • Extend DALI-Bus distance • Extend number of EB
Extender
MKT-CH / 22
Password Protection
To avoid the misuse of the system
Different menu languages
Actual possibility to choose 4 different languages (English, French, German, Spanish)
Other languages are in preparation
System failure analysis software
To ease the maintenance of the system
– System
VS Light Controller L/LW and LS/LSW – Additional Features
MKT-CH / 23
• Use of Push-Button, EnOcean and Sensors as before.
• Constant flux level
• Synchronised light level over DALI by time
• Light on demand by schedule (incl. Bank Holidays)
• Integration of time control possible with future product
Light Controller LS or LSW
• Burglar Stop Function
+
Light can be completely managed by a schedule.
– System
VS Light Controller LS/LSW
MKT-CH / 24
Light Level – WORKING DAY
Light Level – Bank Holiday
– System
VS Light Controller LS/LSW
MKT-CH / 25
System Components Function
Light Controller L&LW
186189
186190
Light Controller LS&LSW
186276
186323
• Light management Controller
MultiSensors
SM 186191 (10mA)
SM-E 186320 (4mA)
FM 186192 (10mA)
FM-E 186321 (4mA)
IL 186193 (10mA)
IL-E 186322 (4mA)
• Movement detection
• Light sensor for brightness control
Movement Sensor (12m)
HB65 186311 (2mA)
IP65 186370 (4mA)
• Movement detection up to 8m
• Light sensor for brightness control
Extender
186194
• Enlarge the system with 64 EBs in addition
• Extend the DALI bus by another 300 m
EnOcean Modules
(see Data sheet)
Can be supplied by
every EnOcean module supplier
• For wireless operations within the system
(control unit)
Antenna
186211/186212/ 186213
• Receiving signals outside the cabinet
Product overview - Light Controller L/LW & LS/LSW
– System
MKT-CH / 26
The VS Light Controller works with the international DALI standard for lighting that makes it possible to
connect DALI-compatible operating devices made by different manufacturers.
Up to 64 DALI operating devices can be connected and controlled via a Push-Button and/or Multi-Sensors.
The VS Light Controller is designed for independent installations.
The Light Controller features a simple configuration tool with dip-switches to enable user-friendly system
configuration directly at the Light Controller unit.
Light Controller S
VS Light Controller S
– System
MKT-CH / 27
VS MultiSensors can be connected via the DALI bus. Configuration over dip-switch position.
L
N P
E
Mains DALI
Push
button
IDALI
DA
LI
Ba
llast
DA
LI
Ba
llast
DALI
VS
Mu
lit
Se
nso
r
VS Light Controller S
– System
MKT-CH / 28
The VS Light Controller works with the international DALI standard for lighting that makes it possible to
connect DALI-compatible operating devices made by different manufacturers.
Up to 10 DALI operating devices can be connected and controlled via a Push-Button and/or Movement-
Sensor High Bay.
The VS Light Controller is designed for In-Luminaire installations.
The Light Controller features a simple configuration tool with dip-switches to enable user-friendly
system configuration directly at the Light Controller unit.
Light Controller XS
VS Light Controller XS
– System
MKT-CH / 29
1 VS MultiSensors can be connected via the DALI bus. Configuration over dip-switch position.
Up to 8 DALI control gears
L
N
DALI IDALI
DA
LI
Ba
llast
DA
LI
Ba
llast
Mains
+ -
+
-
P
E
VS
Mu
lit
Se
nso
r
VS Light Controller XS
– System
MKT-CH / 30
BMS – Building Mangement Systems
Multiple Room
Solutions
Single Room
Solutions
Gateway/
Translater
– System Network
Light Controller IP - Light Management Systems and Interfaces
MKT-CH / 31
c
– System Network
Light Controller IP - Trends
MKT-CH / 32
LiCS System Network - System architecture
– System Network
MKT-CH / 33
Light Controller
IP/DALI - Plattform
DIN
Mount DALI Ethernet
Software: Start-UP
• Search
• Grouping
• Sensor (all variantions)
• Button(wired,wireless)/SW-Button
(Panel,Pad)
• Time Controlled
• Geographical controlled
(Save Sensor)
• Reset/Save/ Load
• Documentation
• Reporting/Mail
• BMS Integration
…
LiCS System Network - System architecture
– System Network
MKT-CH / 34
WAGO - 2,5mm2
Power Supply DALI
Push-Button (8 Inputs)
Ethernet-Connection
„2x“
Daisy-Chain optional
Bidirectional (send and receive)
LiCS System Network - Hardware
– System Network
MKT-CH / 35
Optical Sensor - General Information
– Components
MKT-CH / 36
Thank you for your attention