liebherr brochure lubricants en

7/25/2019 Liebherr Brochure Lubricants En

1/20

Lubricants andoperating fluidsfrom Liebherr


2/202 Liebherr - Lubricants and operating fluids

Today, lubricants are to be considered design

elements. Due to the rapid development in com-

ponent and control system technology, lubri-cants have to deliver ever better performance

and longer service life and must function flaw-

lessly even under the hardest conditions of use.

Liebherr offers you an extensive range of high-

quality lubricants and operating fluids which are

specially designed to meet the requirements of

Liebherr machines. This ensures trouble-free

operation, optimized work processes and high

machine availability as well as a minimum of

wear and tear.

Liebherr lubricants andoperating fluids

In environmentally sensitive areas, the Liebherr

Hydraulic Plus and Liebherr Hydraulic Plus Arctic

may be used, two hydraulic oils based on poly-alhpaolefines (PAO). They are bio-degradable

(Biodegradation (21 days, so-called primary

degradation*) according to CEC-L-103-12 60%)

and have excellent low-friction properties.

Liebherr offers all lubricants and operating fluids

from one source.

* The test method considers directlythe disappearance of the oil up to thedegradation level of water solubility.


3/203Liebherr - Lubricants and operating fluids

Quality and reliability

Liebherr continuously invests in the research

and development of products designed spe-

cifically to meet the requirements of Liebherrmachines thus ensuring that the growing

demands made on lubricants will continue to be

met also in future. These lubricants comply with

all requirements on operational reliability and

meet the highest Liebherr quality standards.

Liebherr lubricants thus enable trouble-free

machine performance, short machine response

times, good cold start properties

and a reduced warm-up phase.

This also includes a highly precise

and sensitive controllability of the

machine.

Liebherr lubricants have a long service life and

offer the best possible protection from corro-

sion and wear for all components.

Benefit from our long-standing experience and

technical knowhow and use the original prod-

ucts from Liebherr! Only then will you be certain

that all components and lubricants are perfectly

matched for your machine to achieve the maxi-

mum performance.

Cost-effectiveness

Liebherr lubricants have been developed to

exactly meet the requirements of Liebherrmachines and therefore contribute signifi-

cantly to lower operating and service costs.

As a system supplier Liebherr supports you in

reducing the number of required lubricants per

machine to a minimum, enabling you to save

money and storage space.



Expert advice andcompetent service

With Liebherr lubricants you are on the safe side. We

assist you in all questions regarding the use of lubricants

and operating fluids and will, together with you, find the

optimum product for your individual requirements. Weinform you about the individual characteristics of each

lubricant, its correct and safe application, storage and

disposal as well as about any applicable standards and

directives. We will also be happy to assist you in prepar-

ing your lube charts.

The same high quality of Liebherr lubricants is available

world-wide. A well-planned logistics system allows a fast

delivery of lubricants to any destination at any time.

Profit from our long-standing experience and the high-

quality Liebherr lubricants and operating fluids developed

to the latest research results! Make use of the all-in lubri-

cants service at your Liebherr Service partner!

The Liebherr Lubricants Service



To preserve the quality and service life of an oil as long as possible and to ensure its efficient use, three factors are

crucial: The selection of the correct filter, a minimum degree of contamination of the oil with foreign substances and

careful handling.

Original filters fromLiebherr

The quality of the oil is crucial for

the total life of the engine, transmis-

sion and complex hydraulic systems.

Long-standing experience from the

use of construction machines shows

that the major part of component fail-

ures as well as early wear are caused

by contamination of the hydraulic

system with solid particles. Badly

filtered oil or insufficient lubrication

may cause serious and expensive

damage to your engine!

Therefore, Liebherr uses only high-

quality original filters in all of its

machines. This is the only way to

keep the risk of expensive damage to

components and machine failures to

a minimum.

The difference between an original

Liebherr filter and a counterfeit filter

is often hard to see from the out-

side. Often, the dirt-holding capac-

ity of the counterfeit filter is distinctly

inferior or it shows leakage because

the seals and gaskets do not exactly

match the system. An inferior pres-

sure stability may also cause the filter

to burst. Therefore, use only original

filters from Liebherr and rely on our

knowhow and our service!

Oil care

Careful handling andcleanliness

Oils and greases can guarantee a

trouble-free operation only if they

are handled properly. Contamination

leads to higher wear, erosion, corro-

sion or malfunction.

A clean work area and the use of

clean work equipment are essential

prerequisites. When opening lubri-

cant containers, always make sure

that no dust or any other foreign

substances on the lid can contami-

nate the product. Always close the lid

immediately after you are done. The

area around the filler neck should

be kept meticulously clean. Always

top up your hydraulic system via the

return flow filter.



Order information Ident number

Mineral oil analysis set

Single analysis set

Analysis set, 4-fold



81 45 660

10 02 96 26

70 18 368

70 18 369

Bio-degradable oils analysis set

Single analysis set


70 26 817

70 26 088

Bleeder valve 70 19 068

For more information please contact your

Liebherr Service Partner.

Oil change according to work loadwith the Liebherr oil analysis

Special oil analysis sets allow a scientifically based and

fast determination of the optimum time for an oil change.

This not only saves money but is also beneficial for the

environment by producing less used oil which needs tobe disposed of. For an analysis of the oil condition in your

machine, Liebherr recommends the OELCHECK Used Oil

Analysis.

Continuous monitoring of the oil condition gives you

better control over the condition of the hydraulic system

as well as the operating fluids, enabling you to see when

there is need for action and avoiding undesirable conse-

quential failures.

Ready-to-use analysis sets andonline lab reports

The OELCHECK analysis sets make sample-taking quick,

clean and easy. The price of the set includes the costs

of a complete analysis. For samples that arrive at the

OELCHECK lab complete with all necessary information

before 12 oclock noon, you will receive the lab reports

by e-mail, mail or fax not later than the following day,

including easy-to-understand comments. All results,

including those of earlier analyses, are compiled in your

personal online database. Go to www.laborberichte.com

to get your personal access code for the online database

OELCHECK.

The benefits of the Liebherr oilanalysis at one glance

Scientifically based examination of the oil condition

including a detailed diagnosis report

Knowledge of the actual condition of your machine -

without requiring time-consuming disassembly work

Longer oil change intervals and oil change at the ideal

time

Detection of impending damage at an early stage, thus

avoiding expensive repairs and downtimes

Long service life of hydraulic and drive components

Reduction of your operating and maintenance costs Environmentally beneficial due to less used oil waste

Oil change



Motor oil

Liebherr Motoroil 10W-40 low ashViscosity SAE 10W-40

Application*

Application temperature

-20 to +45C outside temperature

Released for use in all Liebherr Diesel engines

Low-ash oil for Diesel engine technology with exhaust

gas treatment

Mandatory for use with particle filters in Diesel engines Long oil change intervals of up to 500 op hrs for Diesel

engines in Liebherr machines

Low-friction oil for a better start behaviour at low

temperatures

High wear and corrosion protection as well as ageing

stability

Minimization of fuel consumption and exhaust

emission

High safety reserve towards deposits in the engine

* Please always make sure to observe the operating instructions of the machine or the specific work attachments when selecting a lubricant.

Liebherr Motoroil 5W-30Viscosity SAE 5W-30

Application*



Low-friction oil with excellent properties for use in

Liebherr machines at low temperatures

Long oil change intervals of up to 500 op hrs for Dieselengines in Liebherr machines


stability

Optimisation of cold start behaviour and fuel

consumption


Diesel engines are developed and built by Liebherr especially for use in heavy-duty construction machines and are

therefore exceptionally powerful and robust. The Liebherr Diesel motor oil will preserve these properties as long as

possible, as it extends the service life of the machine components.

Liebherr Motoroil 5W-30 low ashViscosity SAE 5W-30

Application*



Low-friction oil with excellent properties for use in

Liebherr machines at low temperatures

Low-ash oil for Diesel engine technology with exhausttreatment

Mandatory for use with particle filters in Diesel engines

at low ambient temperatures

Long oil change intervals of up to 500 op hrs for Diesel



stability

Optimisation of cold start behaviour and fuel

consumption


Liebherr Motoroil 10W-40Viscosity SAE 10W-40

Application*


-20C to +45C outside temperature

Long oil change intervals of up to 500 op hrs for Diesel


Low-friction oil for a better start behaviour at low

temperatures High wear and corrosion protection as well as ageing

stability

Minimization of fuel consumption and exhaust

emission




Liebherr Hydraulic HVIViscosity ISO VG 46 (32-68)

Application*

Application temperature:-20C (cold start) to +40C outside temperature

Liebherr standard oil for Liebherr wheeled excavators

and crawler excavators

High-quality multi-grade hydraulic oil

Optimized fine control with reduced warm-up phase

Especially suitable for use in low temperatures

Increased ageing stability, therefore longer service

intervals and lower maintenance costs

Liebherr Hydraulic FFE 30Viscosity VG 15-46

Application*

Application temperature:

-40C (cold start) to +50C outside temperature

Ash-free high-performance hydraulic oil on the basisof high-quality hydrocarbons, especially for use in

Liebherr cranes

Excellent ageing stability with optimized detergent and

dispersant properties

Higher machine availability with reduced warm-up

phase

Longer oil change intervals

Liebherr Hydraulic Basic 68Viscosity ISO VG 68

Application*



Liebherr standard oil for Liebherr wheel loaders,

crawler tractors and crawler loaders as well as

telescopic handlers Very good corrosion protection

Good elastomer compatibility

Excellent detergent and dispersant abilities

Liebherr Hydraulic Basic 100Viscosity ISO VG 100

Application*


0C (cold start) to +55C outside temperature

Liebherr hydraulic oil for hot climates

Very good corrosion protection

Good elastomer compatibility Excellent detergent and dispersant abilities


Hydraulic systems today are expected to provide high-precision control and optimum efficiency, even under extreme

conditions. Liebherr hydraulic oils were especially developed to meet these requirements and contribute significantly

to prolonging the life of your construction machine as well as its performance and efficiency. Liebherr hydraulic oils are

characterized by high thermal resistance and good elastomer compatibility, corrosion protection and minimization of

wear. They also allow long oil change intervals and reduce slip start and rebounding of the hydraulic system. Hydraulic

oils from Liebherr therefore meet the high demands of all renowned manufacturers of hydraulic components.

Liebherr Hydraulic 37Viscosity VG 32-46

Application*



High-quality multi-grade hydraulic oil, especially for

use in Liebherr cranes

Significantly improved fine control with reduced

warm-up phase

Hydraulic Oil



Liebherr Hydraulic PlusViscosity ISO VG 46 (32-68)

Application**



High-performance hydraulic fluid with significantly

extended change intervals provided the oil is properly

taken care of and monitored by means of the Liebherr

oil analysis Excellent behaviour in high and low temperatures,

therefore better cold start properties; significantly

reduced warm-up phase

Optimised filterability

Bio-degradable (Biodegradation (21 days,

so-called primary degradation*) according to

CEC-L-103-12 60%) for applications in

environmentally sensitive areas

Low air absorption, good air release properties,

low foaming

Compatible with elastomers and hoses, comparable

to mineral oils Hydrolysis stability similar to mineral oils

No technical problems to be expected if inadvertently

mixed with other Liebherr hydraulic oils (Observe legal

limit values for foreign oils if used in bio applications!)

The two high-performance oils Liebherr Hydraulic Plus and Liebherr Hydraulic Plus Arctic from the group of the HEPR

oils, on the basis of polyalphaolefines (PAO) are bio-degradable (Biodegradation (21 days, so-called primary degrada-

tion*) according to CEC-L-103-12 60%) and are suitable for applications in environmentally sensitive areas.

Liebherr Hydraulic Plus ArcticViscosity VG 15-46

Application**

Same properties as Liebherr Hydraulic Plus, except:


generally -40C (cold start) to +30C; for more

recommendations see operating instructions

Environmentally friendly hydraulic oil

* The test method considers directly the disappearance of the oil up to the degradation level of water solubility.

** Please always make sure to observe the operating instructions of the machine or the specific work attachments when selecting a lubricant.




Axle and transmission oils from Liebherr were especially developed for components where high friction values and

shearing forces occur. The use of high-grade basic oils and matched additives creates an optimum friction and wear

behaviour ensuring a long service life of the components even under demanding application conditions.

Axle and transmission oils

Liebherr Gear Basic 90LSViscosity SAE 85W-90

Application*


To -30 outside temperature

To -5C with splitter boxes with oil cooler

Developed for axle transmissions with limited slip

differentials in Liebherr construction machines,

log and material handling excavators

Limited slip additives (LS additives)

Wear and corrosion protection, specially optimized forLiebherr machines

Good ageing stability

Continuous high performance

Liebherr Gear Plus 20W-40Viscosity SAE 20W-40

Application*

High-performance oil, especially developed for use in

axles of Liebherr road rail excavators and log handling

machines

UTTO high-pressure lube oil for heavy-duty axles in

Liebherr machines

Limited slip additives (LS additives)

Reduced friction loss due to high lubricity

Liebherr Syntogear Plus 75W-90Viscosity SAE 75W-90

Application*

Fully synthetic transmission oil with excellent ageingstability

Developed for use in transmissions and manual

gearboxes of Liebherr machines as well as final

drives of crawler tractors PR 714, especially also

in low temperature applications

Reduced fuel consumption

Long oil change intervals

Liebherr Hydraulic-Gear ATFViscosity SAE 5W-20

Application*


-40C to +50C outside temperature for automatic

gearboxes and -25C to +50C outside temperaturefor crane hydraulics

Excellent corrosion protection

Reduces wear and friction

Increases service life of components

Special-alloy power transmission oil for automatic

gearboxes and special hydraulics in cranes.

Especially suitable for transmissions of Liebherr

2plus2 wheel loaders

Liebherr Gear Hypoid 90EPViscosity SAE 85W-90EPApplication*

High-pressure transmission oil for axle transmissions

(with EP additives)

Formation of a stable lubricating film


Especially for use in splitter boxes, winch and

slewing gear drives according to regulations


Good ageing stability

Liebherr Hypoid 85W-140EPViscosity SAE 85W-140Application*

Especially developed for final drives of Liebherr crawler

tractors and crawler loaders (except PR 714)

High-pressure transmission oil (with EP additives)

Formation of a stable lubricating film





Careful lubrication with high-quality greases is of special importance in order to ensure the reliability and performance

of heavy-duty machines.

Greases

Liebherr Universalfett 9900Labelling KPF 2 N-25 Universal Grease 9900

Application*

Operating temperature

-25C to +150C; in central lubricating systems to

-20C, short-term permissible temperature peak:

+200C

Can be pumped or fed in central lubrication systems

to -20C Suitable for the lubrication of slewing rings, roller bear-

ings, pins, gear rings, axles, screws and many more

Very strong adhesion properties, squeeze stable,

non-ageing, water-resistant

Highly effective special corrosion protection

Reduced model variety lessens risk of mix-up,

facilitates ordering and takes up less storage space

Liebherr Teleskopfett 9613 PlusLabelling KP 2 K-30 Telescope Grease 9613 Plus

Application*

Operating temperature:

-30C to +120C; feedable in central lubricating

systems to -30C

Special jib grease for telescope applications in Liebherr

machines

Anti-stick-slip properties to prevent stick-slip motions,

also in wet conditions

Very small friction coefficient High adhesion properties on plastic materials

Low static friction during start-up

Liebherr Universalfett ArcticLabelling KPFHC 1 N-60 Universal Grease Arctic

Application*


-60C to +140C; feedable in central lubricating

systems to -55C

Can be pumped or fed in central lubrication systems

to -55C

Lubrication of slewing bearings, pins, gear rings, axles,

screws and many more Very strong adhesion properties, squeeze stable,

non-ageing, water-resistant

Liebherr Sprhpaste/Spray pasteLabelling MPF 00 G-40

Application*


-25C to +100C, short-term up to +120C

Sprayable, cold-flexible paste with micro graphite

for the low-wear operation of meshing tooth flanks

Increased corrosion protection

Emergency-running properties

Water-resistant High-pressure additives and adhesives

Good film-retaining property




Liebherr offers special lubricants for special applications such as the lubrication of screws or plug tools and wear bush-

ings in hydraulic and pneumatic hammers, which are designed to exactly meet these requirements.

Liebherr MeielpasteLabelling MF 2-3 P-20 chisel paste

Application*


-20C to +150C during permanent lubrication

(Separating effect of solid substance film to approx.

+800C)

Paste enriched with metallic powder and solid

substances for the lubrication of plug tools and wear

bushings in hydraulic and pneumatic hammers

This is not a lube grease! Do not use it for the lubrica-tion of rolling or sliding bearings!

Very squeeze stable, oxidation-resistant and extremely

thermally resistant

Good corrosion protection and water-resistance

Cartridge can be opened without any additional tools,

and residues can be cleaned out easily

Sight glass in cartridge shows remaining paste level

Liebherr Gear PG 220Viscosity ISO VG 220

Application*

Fully synthetic high-performance transmission oil

on the basis of polyglycols

Especially suitable for heavy-duty components

(observe manufacturers instructions!)

Good ageing stability and specific additivation

may extend oil change intervals

Note: Liebherr Gear PG 220 cannot be mixed

with mineral oils or synthetic oils

Liebherr Gear PG 150Viscosity ISO VG 150

Application*

Fully synthetic high-performance transmission oil

on the basis of polyglycols


(observe manufacturers instructions!)

Good ageing stability and specific additivation

may extend oil change intervals

Note: Liebherr Gear PG 150 cannot be mixed with

mineral oils or synthetic oils

Liebherr Spezial-SchraubenpasteSpecial screw paste

Application*


-40C to +100C,

For high-strength friction grip screw connections

On the basis of a bio-degradable synthetic oil with a

temperature-stable solid lubricant combination

Solid lubricants do not react with the screw material

Supplies constant and reproducible friction, to achieve

the required friction grip in the screw connection Do not use Liebherr Spezial-Schraubenpaste instead of

grease and never mix it with other lubricants!

Use only for the applications indicated by Liebherr!

Pastes have an especially high portion of solids which

may cause damage if used incorrectly!

Special lubricants



Special lubricants


Liebherr Gear MultiHDC-B

Application*



-5C to +50C outside temperature for truck mixer

transmissions in connection with Rexroth

Special transmission oil for Liebherr mixing technology

machines

For truck mixer transmissions and separate engines

Good wear protection High safety reserve against deposits in the engine

Liebherr WR-Lube SC

Application*



(after the solvent evaporates)

Rope lubricant for subsequent preservation of wire

ropes

For crane, excavator and industrial ropes


Excellent adhesive properties and outstanding creepproperties

Liebherr Gas Engine Oil 40Viscosity SAE 40

Application*


0C to +40C, outside temperature

Developed to meet the requirements of modern gas

engines

Suitable for gas engines operated with natural gas or

low-emission special gasses

Excellent neutralisation properties

Allows long oil change intervals even under difficult

operating conditions




Liebherr offers special lubricants for special applications such as the lubrication of screws or plug tools and wear bush-

ings in hydraulic and pneumatic hammers, which are designed to exactly meet these requirements.

Liebherr Fluid X-1Viscosity VG 15-46

Application*

High-performance hydraulic fluid especially for

use in the Liebherr energy-storing cylinder

Excellent high and low temperature behaviour

Optimized filterability and cleanliness

Low air absorption, good air release properties,

low foaming

Good compatibility with elastomers and hoses

Supports the efficiency of the Liebherr energyrecovery system

Liebherr Syntogear PlusViscosity ISO VG 150/220/320/460

Application*

Fully synthetic high-performance transmission oil on

the basis of polyalphaolefines (PAO)


(Observe manufacturers instructions!)

Good ageing stability and specific additivation may

prolong oil change intervals

Special lubricants

Liebherr Spezialfett 9610 PlusLabelling KP 2 K -20 Special Grease 9610 Plus

Application*


-20C to +120C, in central lubrication systems to

-15C, short-term permissible temperature peak +140C

Can be pumped and fed in central lubrication systems

to -15C

Can be used for the lubrication of slewing rings, roller

bearings, pins, gear rings, axles, screws and many

more

Strong adhesive property, squeeze stable, ageing-

resistant and water-resistant

Highly effective corrosion protection




Liquid-cooled engines need an effective coolant in order to sustain their performance on an ongoing basis. Liebherr

Antifreeze was tested to strict standards and, when used in Liebherr machines, meets the highest demands on func-

tion, quality, safety and environmental protection.

Coolants

Liebherr Antifreeze ConcentrateLabelling Liebherr Antifreeze Concentrate

Application*

Liebherr Antifreeze Concentrate must be mixed with water

before use. The use of zinc is not recommended. Can be

used all-year round. Please observe the manufacturers

instructions.

Antifreeze protection after mixing:

To -37C with 50% water and 50% Liebherr Antifreeze

Concentrate


Concentrate

Do not use more than 60% of the Liebherr Antifreeze

Concentrate

Silicate-containing coolant: Ideal protection for Diesel

engines from Liebherr, John Deere or Deutz and their

components. Suitable for construction machines and

commercial vehicles*

Coolant, free from nitrite, amine and phosphate

Effectively prevents corrosion and deposits in thecooling system

Protection from cavitation and erosion damage

Liebherr Antifreeze MixLabelling Liebherr Antifreeze Mix

Application*

Liebherr Antifreeze Mix is a ready-to-use mix with an opti-

mum, defined water quality. The use of zinc is not recom-

mended. Please observe the manufacturers instructions.

Antifreeze protection to -37C

Silicate-containing coolant: Ideal protection for Dieselengines from Liebherr, John Deere or Deutz and their

components. Suitable for construction machines and

commercial vehicles*

Coolant, free from nitrite, amine and phosphate

Effectively prevents corrosion and deposits in the

cooling system


DCA-haltige Khlmittel

DCA-containing coolants are available on request, either

as a concentrate or ready-to-use mix.

Product description:

Nitrite-containing coolant on ethylene glycol basis for

Liebherr Diesel engines type 924/D926, 9406, 9408 aswell as a number of Cummins and John Deere engines

Effectively prevents corrosion and deposits in the cool-

ing system




CoolantsLiquid-cooled engines need an effective coolant in order to sustain their performance on an ongoing basis. Liebherr

Antifreeze was tested to strict standards and, when used in Liebherr machines, meets the highest demands on func-

tion, quality, safety and environmental protection.

Liebherr Antifreeze Organic SF MixLabelling Liebherr Antifreeze Organic SF Mix

Application*

Liebherr Antifreeze Organic SF mix is a ready-to use mix

with an optimum, defined water quality. Its use in combi-

nation with zinc is not recommended.

Please observe the manufacturers instructions.

Antifreeze protection to -37C

Silicate-free long life coolant: Ideal protection for Dieselengines from Liebherr and their components. Suitable

for construction machines and commercial vehicles*

Coolant free from nitrite, amine, phosphate and silicate


cooling system


Liebherr Antifreeze Organic SF ConcentLabelling Liebherr Antifreeze Organic SF Concent

Application*

Liebherr Antifreeze Organic SF Concent must be mixed

with water before use. Its use in combination with zinc is

not recommended. Can be used all-year round. Please

observe the manufacturers instructions.

Antifreeze protection after mixing: To -37C with 50% water and 50% Liebherr Antifreeze

Organic SF Concent


Organic SF Concent

Do not use more than 60% of the Liebherr Antifreeze

Organic SF Concent

Silicate-free long life coolant: Ideal protection for Diesel

engines from Liebherr and their components. Suitable

for construction machines and commercial vehicles*.

Coolant free from nitrite, amine, phosphate and silicate


cooling system Protection from cavitation and erosion damage


Tower Crane

Articulated Truck

Truck mixer

Mobile harbour crane

Duty-cycle crawler crane

Crawler loader

Wheeled excavator

Mobile construction crane

Legend:

Mobile crane

Offshore crane

Crawler tractor

Wheel loader

Crawler excavator

Crawler crane

Telescopic handler



Use of environmentally friendlyhydraulic oils

Bio-degradable hydraulic fluids are an environmentally

friendly alternative to conventional hydraulic oils on min-

eral basis and are especially eligible in environmentally

sensitive areas such as water protection areas.

Liebherr machines come either filled with environmentally

friendly hydraulic oils ex works or may be changed over

subsequently.

When selecting the suitable environmentally friendly oil,

ecological aspects as well as technical aspects should

be taken into account. Hydrolysis and oxidation stability,

elastomer compatibility, temperature behaviour and other

properties of the oils used will influence the useful life of

the oil filling and of the machine components. This means:The entire product life cycle from production through use

and disposal must be taken into consideration when look-

ing at environmental compatibility.

With the Liebherr Hydraulic Plus and the Liebherr Hydrau-

lic Plus Arctic, Liebherr offers two environmentally friendly

hydraulic oils on the basis of polyalphaolefines (PAO).

They are bio-degradable (Biodegradation (21 days, so-

called primary degradation*) according to CEC-L-103-12

60%) and have excellent low-friction properties which

reduce fuel consumption. If the oil is well cared for and

monitored, the oil change intervals may be extended sig-

nificantly. Compatibility with elastomers and hoses as

well as hydrolysis stability is similar to those of conven-

tional mineral oils.

Your Liebherr Service partner will be pleased to assist

you if you have further questions regarding the use of

environmentally friendly hydraulic oils.

Storage and disposal

Correct storage of lubricants

To protect your lubricants from weather and contamina-

tion store them in confined spaces. Temperature fluctua-tions will cause the volume of the lubricants to change,

thus possibly allowing humidity to enter even closed con-

tainers, affecting the quality of the oil.

Disposal of used oils and containers

Lubricants, and even environmentally friendly hydraulic

oils, must not enter the sewage system, the soil or waters.

Please take precautionary measures. The use of environ-

mentally friendly hydraulic oils does not exempt the user

of his obligation to notify the authorities of a contamina-

tion of the environment, and to remove spilled oil fromwaters or the contaminated soil. Hydraulic oil must never

be allowed to drain into the soil during an oil change.

All applicable legal regulations must be observed during

waste disposal and recycling of used materials such as

oils, lubricants and coolants, fuels, filters, oil cartridges or

containers. Therefore, please contribute to the protection

of our environment and have only certified companies

dispose of your waste.

Environmental protection

* The test method considers directly the disappearance of the oil up to the degradation level of water solubility.



Oils5 l Jerrycan 20 l Jerrycan 210 l Drum

1.000 l

Container

Liebherr Motoroil 10W-40 10 29 05 06 10 33 02 39 10 33 02 46 10 28 62 79

Liebherr Motoroil 10W-40 low ash 10 32 61 13 10 32 61 12 10 32 61 11 10 32 61 10

Liebherr Motoroil 5W-30 10 42 57 12 10 42 57 13 10 42 57 15 10 42 57 19

Liebherr Motoroil 5W-30 low ash 11 06 60 29 11 06 60 30 11 06 60 31* 11 06 60 32**

Liebherr Hydraulic Basic 68 10 33 02 55 10 33 02 58 10 33 02 59 10 33 02 60

Liebherr Hydraulic Basic 100 10 34 40 24 10 34 40 25 10 34 40 26 10 34 40 27

Liebherr Hydraulic HVI 10 33 02 66 10 33 02 68 10 33 02 70 10 33 02 71

Liebherr Hydraulic Plus 10 29 64 80 10 33 02 72 10 33 02 76 10 29 64 81

Liebherr Hydraulic Plus Arctic 10 29 64 79 10 33 02 77 10 33 02 78 10 29 64 78

Liebherr Hydraulic 37 10 66 48 65 10 66 48 67 10 66 47 12 10 66 48 56

Liebherr Hydraulic FFE 30 10 66 48 70 10 66 48 71 10 66 48 72 10 66 48 73

Liebherr Hydraulic-Gear ATF 10 33 02 80 10 33 02 82 10 33 02 83 10 29 64 82

Liebherr Syntogear Plus 75W-90 10 33 02 85 10 33 02 87 10 33 02 88 10 29 64 77

Liebherr Gear Plus 20W-40 10 28 56 40 10 33 02 94 11 21 13 89 11 21 13 88

Liebherr Gear Basic 90LS 10 33 02 95 10 33 02 96 10 28 57 02 10 28 62 80

Liebherr Gear Hypoid 90EP 10 66 48 74 10 66 48 75 10 66 48 76 10 44 16 36

Liebherr Hypoid 85W-140EP 10 28 56 39 10 33 02 91 10 30 16 80 10 33 02 92

Greases 400 gCartridge

400 gLubeShuttle

Cartridge

4 x 400 g

Cartridges

24 x 400 gLubeShuttleCartridges

24 x 400 g

Cartridges

Liebherr Universalfett 9900 10 29 68 16 10 66 47 21 10 42 50 86 11 10 08 90 10 29 68 15

Liebherr Universalfett Arctic 10 29 68 28 10 29 68 27

Liebherr Teleskopfett 9613 Plus 86 13 05 508 10 29 68 20

10 kg

Bucket

25 kg

Bucket

50 kg

Bucket

180 kg

Drum

Liebherr Universalfett 9900 10 29 68 13 10 29 68 12 10 29 68 11 10 29 68 10

Liebherr Universalfett Arctic 10 29 68 25 10 29 68 24 10 29 68 23 10 29 68 22

Liebherr Teleskopfett 9613 Plus 10 33 03 14 10 33 03 15 10 33 03 16

Ordering information

* Quantity 209 l** Quantity 1045 l



Coolants5 l Jerrycan 20 l Jerrycan 210 l Drum

1.000 l

Container

Liebherr Antifreeze Concentrate 10 30 12 15 10 42 84 10 10 42 84 11 10 35 68 33

Liebherr Antifreeze Mix 10 65 18 38 10 30 12 13 10 45 54 46 10 35 90 77

Liebherr Antifreeze OrganicSF Concent

11 48 22 93 11 48 22 94 11 48 22 95 11 48 22 96

Liebherr Antifreeze OrganicSF Mix

11 48 22 98 11 48 22 99 11 48 23 00 11 48 23 01

473 ml Bottle 20 l Jerrycan

DCA Concentrate 73 63 898

Anti-freeze Ready mixwith DCA

10 00 53 47

Note:Please observe manufacturers instructions and oiling regulations. For orders and additional information please contact your Liebherr Service Partner.All information is provided to the best of our knowledge, but without any guarantee. We reserve the right to change data because of innovations or product changes.

Special lubricants500 g Cartridge 20 x 500 g Cartridges 1 kg Can

Liebherr Meielpaste 86 10 230 10 33 03 06

Liebherr Spezial-Schraubenpaste 10 17 13 36

Ordering information

5 l Jerrycan 20 l Jerrycan 174 l Drum 870 l Container

Liebherr Gear PG 150 11 00 08 72 11 00 08 73 11 00 08 74 11 00 08 75

5 l Jerrycan 20 l Jerrycan 210 l Drum 1.000 l Container

Liebherr Gear PG 220 11 00 08 67 11 00 08 69 11 00 08 70 11 00 08 71

Liebherr Gas Engine Oil 40 11 10 07 83 11 10 02 05 11 10 02 06 11 10 02 07

Liebherr Syntogear Plus 150 11 11 31 79 11 11 31 80 11 11 31 81 11 11 31 82




Liebherr Gear Multi HDC-B 10 81 78 92 10 81 78 93 10 81 78 94 10 81 78 95

(600ml) (12 x 600ml) (25kg)

Liebherr WR Lube SC 10 17 33 71 10 17 42 61 10 17 42 62

950 g Hose bag 10 x 950 g Hose bag 5 kg Bucket

Liebherr Sprhpaste 10 33 03 08 10 33 03 10 10 33 03 11

1 l Can

Liebherr Fluid X-1 11320316

400 gCartridge

10 kg Bucket 25 kg Bucket 50 kg Bucket 180 kg Drum

Liebherr Spezialfett 9610 Plus 86 13 02 908 86 13 01 308 86 13 04 508 86 13 05 308 86 13 05 108


20/20

The Liebherr Group of Companies

Wide Product RangeThe Liebherr Group is one of the largest constructionequipment manufacturers in the world. Liebherrs

high-value products and services enjoy a high reputation

in many other fields. The wide range includes domestic

appliances, aerospace and transportation systems,

machine tools and maritime cranes.

Exceptional Customer BenefitEvery product line provides a complete range of models

in many different versions. With both their technical

excellence and acknowledged quality, Liebherr products

offer a maximum of customer benefits in practical

application.

State-of-the-art TechnologyTo provide consistent, top quality products, Liebherrattaches great importance to each product area, its

components and core technologies. Important modules

and components are developed and manufactured

in-house, for instance the entire drive and control

technology for construction equipment.

Worldwide and IndependentHans Liebherr founded the Liebherr family company in

1949. Since that time, the enterprise has steadily grown

to a group of more than 130 companies with over

38,000 employees located on all continents. The corporate

headquarters of the Group is Liebherr-International AG

in Bulle, Switzerland. The Liebherr family is the sole owner

of the company.

www.liebherr.com

Liebherr-Hydraulikbagger GmbH

Subject to technical modifications.Printed in Germany by Schirmer BK LHB/ET 10450754-0.5-09.13_en

liebherr brochure lubricants en

Documents