www.stannahlifts.co.uk

Stannah Maxilift 2.0 passenger lift range

Lift finishes and options

Designed with modern living in mind the Maxilift 2.0 offers clean, sleek lines and smoothoperation. We have a variety of car finish styles to suit every budget. Our customers can mix andmatch to ensure the lift complements the interior of any building.

Contents• Car walls

• Car ceilings

• Car floors

• Car operating panels

• Landing controls and indicators

• Mirrors and handrails

• Maxilift 2.0 standard specification

• Example configurations

Please note: costs may vary and are dependent on the choice of finishes selected.

MAXILIFT 2.0 – SECTION 1: CAR WALLSBACK TOCONTENTS

Car walls

NEXTSECTION

Vinyl skinplates

A90GTA

Cream

F12PPS

Silver Grey

B13

Slate Blue

PPS13

Cream Swirl

Stainless steel

Satin Mirror Linen Checks

Laminates

Glass

4090

Yellow

504090

Orange

RM

Burgundy

PS YB9

Green

PS BM15

Blue

MW

Neutral

AC7

Black

Samples are available on request – please call: 01264 339090The colours and designs reproduced in this document have been matched as closely as thescanning and printing process will allow. It is recommended you obtain samples prior to finalspecification. We are continually developing and improving our range of products and finishesand we therefore reserve the right to alter or amend the specification without prior notice.

Please note All skirting, corner profiling and entrance returnsare satin stainless steel as standard excluding vinylskinplate where it matches the chosen colour.The stainless steel grading is AIS1441 as standard.We also offer AIS1304 as a special option.

DU1715VV

Light Blue

DU8110

Light Grey

2416

Grey Chestnut Woodgrain

2982

Sand Woodgrain

2042

Redwood

2228

Birch Woodgrain

2307

Mahogany

5410

Dark Pear

AB1306

Walnut

5372

Golden Oak

MAXILIFT 2.0 – SECTION 2: CAR CEILINGSBACK TOCONTENTS

Car ceilings

PREVIOUSSECTION

NEXTSECTION

Standard

O55Mirror stainless steel and plexiglassdiffuser. 3x fluorescent tubes.

Panel

Options

O3Mirror stainless steel and plexiglassdiffuser. 2x fluorescent tubes + 4x LEDspots.

Frame

O14Mirror stainless steel and plexiglassdiffuser. 4x fluorescent tubes.

Grid

O11Mirror stainless steel and plexiglassdiffuser. 4x fluorescent tubes.

Bubble

O10Mirror stainless steel and plexiglassdiffuser. 3x fluorescent tubes.This style is also suitable for lowheadroom cabins.

Aperture

Please note All suspended ceilings with stainless steel finishas standard.

All ceilings are available with standard halogenlighting (no. of lights is dependent on cabinsize) or high energy efficiency (LED).

MAXILIFT 2.0 – SECTION 3: CAR FLOORSBACK TOCONTENTS

Car floors

PREVIOUSSECTION

NEXTSECTION

PVC flooring

Laminate flooring†

Artificial granite†

RW

White

RB

Beige

RK

Black

Samples are available on request – please call: 01264 339090The colours and designs reproduced in this document have been matched as closely as thescanning and printing process will allow. It is recommended you obtain samples prior to finalspecification. We are continually developing and improving our range of products and finishesand we therefore reserve the right to alter or amend the specification without prior notice.

Please note:Floors can be left recessed forfinishing by others.

6801

Black Sparkle

6768

Grey Sparkle

MX19101

Sandstone

8766

Black Oak

1675

Birch

8459

Dark Cherry

8096

Grey Chestnut

MAXILIFT 2.0 – SECTION 4: CAR OPERATING PANELSBACK TOCONTENTS

Car operating panels

PREVIOUSSECTION

NEXTSECTION

Standard car operating panel200mm(w) x 2000mm(h)Satin stainless steel with dot matrixposition and direction of travel indicator(LCD position indicator optional)

AKC BES

MT42

Radius cornered squares 30 x 30mmSatin stainless steel or mirror stainless steel

Push buttons

MAXILIFT 2.0 – SECTION 5: LANDING CONTROLS & INDICATORSBACK TOCONTENTS

Landing controls & indicators

PREVIOUSSECTION

NEXTSECTION

Landing indicators†

SMRQ 909DMA

230mm(w) x 92mm(h) x 20mm(d)Satin stainless steel

Landing operating panels†

Standard configurations

AKL 001 SMRQ 300A

Please note:SMRQ & SMSC call button panels showncan be surface mounted direct onto wallor lift architrave – no need for apertures

SMSC 600

Surface mounted

Single buttoncollective.

Optional highest call-down collective.

88mm(w) x 202.4mm(h)

Flush mounted

Single button collective.

Optional highest call-down collective.

85mm(w) x 180mm(h)

Surface mounted

Fully directional callcollective.

88mm(w) x 202.4mm(h)

† ADDITIONAL NOTES

MAXILIFT 2.0 – SECTION 6: MIRRORS AND HANDRAILSBACK TOCONTENTS

Mirrors and handrails

PREVIOUSSECTION

NEXTSECTION

Half height, full width mirror fitted as standard Full height and narrow optionsavailable

Mirrors

Handrails

K2a mirror stainless steel available as standard. EN81-70 non-compliant.

K3 mirror stainless steel available as standard. EN81-70 compliant.

MAXILIFT 2.0 – SECTION 8: STANDARD SPECIFICATIONBACK TOCONTENTS

Maxilift 2.0 standard specification

PREVIOUSSECTION

NEXTSECTION

Lift car: fabricated steel lift car frame includingheader assembly, platform buffer plates andguide shoes with lubricators

Car & landing doors: finished in stainless steel

Doors: 2hr fire-rated doors in 800, 900 & 1000mmwidth, 2000mm height

Communication options: EN81-28 compliantautodialler

Motor drive type: electronic hydraulic valve withoptional VVVF drive, MRL

Configuration: cantilever sling design mounted ona load-bearing wall

Rated speed: up to 1 m/s

Additional standard features:• Automatic relevelling to landing floor• Anti-creep device to prevent movement away from landing

• Overload weighing device• Emergency lighting within lift car giving 3hr duration

MAXILIFT 2.0 – SECTION 9: EXAMPLE CONFIGURATION 1BACK TOCONTENTS

Example configuration 1

PREVIOUSSECTION NEXT PAGE

Walls & skirting:Silver Grey (F12 PPS) vinyl skinplate

Handrail:K3 mirror stainless steel handrail

Car operating panel:Standard satin stainless steel

Ceiling:Panel (O55) Stainless steel mirror and plexiglass3x fluorescent tubes

MAXILIFT 2.0 – SECTION 9: EXAMPLE CONFIGURATION 2BACK TOCONTENTS

Example configuration 2

PREVIOUSSECTION NEXT PAGE

Walls & skirting:Satin stainless steel

Handrail:Custom handrail

Car operating panel:Standard satin stainless steel withround push buttons

Ceiling:Aperture (O10) Mirror stainless steel and plexiglass3x fluorescent tubes

MAXILIFT 2.0 – SECTION 9: EXAMPLE CONFIGURATION 3BACK TOCONTENTS

Example configuration 3

PREVIOUSSECTION

Walls & skirting:Redwood (DU5610HG) laminate andsatin stainless steel

Handrail:Custom handrail

Car operating panel:Standard satin stainless steel withround push buttons

Ceiling:Panel (O55)Stainless steel mirror and plexiglass3x fluorescent tubes

Additional notes

MAXILIFT 2.0 – ADDITIONAL NOTES – LANDING CONTROLS & INDICATORS

Additional notes – landing controls & indicators

RETURN TO PAGE

LANDING CONTROLS & INDICATORS

• Travel indicatorsThe landing lift travel indicator is on all landing levels.

• Landing control optionsThere are an array of options within the display including LED or LCD and round instead of square buttons. For further details please contact us.

www.stannahlifts.co.uk

Stannah LiftsAnton Mill, Andover, Hampshire SP10 2NXTelephone: 01264 339090