lifting equipment contents · lifting equipment catalogue 9 gd - 1 range • rapid and precise air...

JACKING BEAMS ..................................................................................................................................................................................................................................................................................... 4

PIT JACKS .................................................................................................................................................................................................................................................................................................. 8

AIR HYDRAULIC JACKS & ACCESSORIES ....................................................................................................................................................................................................................................... 16

AIRCRAFT JACKS .................................................................................................................................................................................................................................................................................. 20

CRANES ................................................................................................................................................................................................................................................................................................... 28

TRANSMISSION JACKS & ACCESSORIES ....................................................................................................................................................................................................................................... 30

LIFTING EQUIPMENT ACCESSORIES .............................................................................................................................................................................................................................................. 32

JACKING BEAMS & PIT JACKS ACCESSORIES ............................................................................................................................................................................................................................... 12

AXLE STANDS ........................................................................................................................................................................................................................................................................................ 14

HYDRAULIC JACKS & ACCESSORIES ............................................................................................................................................................................................................................................... 22

LIFTING EQUIPMENT CONTENTS

For more information visit: www.GarageEquipment.com.au or call 1800 777 318

WHEEL TROLLEYS ................................................................................................................................................................................................................................................................................ 26

JACKING BEAMS

4 : JACKING BEAMS For more information visit: www.GarageEquipment.com.au or call 1800 777 318

JACKING BEAMS

5LIFTING EQUIPMENT CATALOGUE

SD20L / SD26L

• Quick and efficient lifting due to manual double acting pump• Low closed height of only 180 mm makes it suitable for vehicles with a low clearance• Flexible top support beam can be extended up to 1610 mm• Unique height adjustable support arm system – designed to fit all current lifts and pits• Two-hand lowering operation with dead man’s release, automatic safety locking device and overload valve for

optimum safety• Supplied with 3 extension sets (10/40/85 mm) and rubber cushion for protection of car body

Description SD20L SD26LCapacity: 2000 kg 2600 kgStroke: 250 mm 250 mmMin. height: 180 mm 180 mmTelescopic arms: 780 - 1610 mm 780 - 1610 mmWidth (÷ support arms): 780 - 1180 mm 780 - 1180 mmLifting frame (height): 120 mm 120 mmLifting frame (depth): 249 mm 249 mmAir supply:Air consumption:Weight (÷ support arms): 105 kg 105 kg

Technical Data

Hand hydraulic jacking beam for passenger cars and vans

SD20PHL / SD26PHL

• Quick and efficient lifting due to reliable and noiseless pump• Low closed height of only 180 mm makes it suitable for vehicles with a low clearance• Flexible top support beam can be extended up to 1610 mm• Unique height adjustable support arm system – designed to fit all current lifts and pits• Two-hand lowering operation with dead man’s release, automatic safety locking device and overload valve for

optimum safety• Supplied with 3 extension sets (10/40/85 mm) and rubber cushion for protection of car body

Description SD20PHL SD26PHLCapacity: 2000 kg 2600 kgStroke: 250 mm 250 mmMin. height: 180 mm 180 mmTelescopic arms: 780 - 1610 mm 780 - 1610 mmWidth (÷ support arms): 780 - 1180 mm 780 - 1180 mmLifting frame (height): 120 mm 120 mmLifting frame (depth): 249 mm 249 mmAir supply: 8,5 - 12 bar 8,5 - 12 barAir consumption: 350 l/min 350 l/minWeight (÷ support arms): 110 kg 110 kg

Technical Data

Air hydraulic jacking beam for passenger cars and vans

JACKING BEAMS

6 : JACKING BEAMS For more information visit: www.GarageEquipment.com.au or call 1800 777 318

SD20PHL-A / SD26PHL-A

• Individual joysticks control of lifting arms to avoid time consuming working operations• Remote control activates lowering and retraction of lifting arms to closed position• Placing the remote control next to the lift control panel ensures safe operation and prevents unnecessary steps• Unique height adjustable support arm system – designed to fit all current lifts and pits• Supplied with 3 extension sets (10/40/85 mm) and rubber cushion

Description SD20PHL-A SD26PHL-ACapacity: 2000 kg 2600 kgStroke: 250 mm 250 mmMin. height: 200 mm 200 mmTelescopic arms: 780 - 1500 mm 780 - 1500 mmWidth (÷ support arms): 780 - 1180 mm 780 - 1180 mmLifting frame (height): 120 mm 120 mmLifting frame (depth): 249 mm 249 mmAir supply: 8,5 - 12 bar 8,5 - 12 barAir consumption: 350 l/min 350 l/minWeight (÷ support arms): 120 kg 120 kg

Technical Data

Automatic air hydraulic jacking beam for inspections centres and workshops with many lifting operations

SD40PHL

• Strong and robust design makes it ideal for lifting heavy vehicles• Low closed height of only 230 mm• Flexible top support beam can be extended up to 1500 mm• Unique height adjustable support arm system – designed to fit all current lifts and pits• Two-hand lowering operation with dead man’s release, automatic safety locking device and overload valve for

optimum safety• Supplied with 2 extension sets (50/100 mm)

Description DimensionCapacity: 4000 kgStroke: 250 mmMin. height: 230 mmTelescopic arms: 780 - 1500 mmWidth (÷ support arms): 780 - 1220 mmLifting frame (height): 160 mmLifting frame (depth): 343 mmAir supply: 8,5 - 12 barAir consumption: 350 l/minWeight (÷ support arms): 175 kg

Technical Data

Air hydraulic jacking beam for passenger cars, vans and trucks


FL - 1 RANGE

• Rapid and precise air hydraulic unit with high speed ram travel• Simple modern design with control panel at ergonomical working height• Can be made to fit all lifts due to its adjustable frame (590 - 890 mm or 850 - 1150 mm)• Frame height is adjusted and set to the customers individual specifications• Transversely sliding ram• Dead man’s release and safety overload valve for optimum safety• Supplied with 1 x 100 mm extension

Description FL60 - 1 FL100-1 FL120 - 1 FL160 - 1 FL200 - 1Capacity: 6000 kg 10,000 kg 12,000 kg 16,000 kg 20,000 kgStroke: 200 mm 200 mm 200 mm 200 mm 200 mmMin. height: 305 mm 380 mm 380 mm 380 mm 380 mmMax. height: 505 mm 580 mm 580 mm 580 mm 580 mmWidth: 590 - 1150 mm 590 - 1150 mm 590 - 1150 mm 590 - 1150 mm 590 - 1150 mmDepth: 665 mm 665 mm 665 mm 665 mm 665 mmAir supply: 8,5 - 12 bar 8,5 - 12 bar 8,5 - 12 bar 8,5 - 12 bar 8,5 - 12 barAir consumption: 350 l/min 350 l/min 350 l/min 350 l/min 350 l/minWeight: 200 kg 200 kg 200 kg 200 kg 200 kg

Technical Data

Standard air hydraulic single ram jacking beam

FL - 2 RANGE

• 2 individually controlled rams offer safe and balanced lifting• Transversely sliding rams• Rapid and precise air hydraulic unit with high speed ram travel• Simple modern design with control panel at ergonomical working height• Can be made to fit all lifts due to its adjustable frame (590 - 890 mm or 850 - 1150 mm)• Frame height is adjusted and set to the customers individual specifications• Dead man’s release and safety overload valve for optimum safety• Supplied with 2 x 100mm extensions

Description FL60 - 2 FL100 - 2 FL120 - 2 FL160 - 2 FL200 - 2Capacity: 6000 kg 10,000 kg 12,000 kg 16,000 kg 20,000 kgStroke: 200 mm 200 mm 200 mm 200 mm 200 mmMin. height: 305 mm 305 mm 380 mm 380 mm 380 mmMax. height: 505 mm 505 mm 505 mm 505 mm 505 mmWidth: 590 - 1150 mm 590 - 1150 mm 590 - 1150 mm 590 - 1150 mm 590 - 1150 mmDepth: 665 mm 665 mm 665 mm 665 mm 665 mmLifting Points (distance): 200 - 898 mm 200 - 898 mm 200 - 898 mm 200 - 898 mm 200 - 898 mmAir supply: 8 - 12 bar 8 - 12 bar 8 - 12 bar 8 - 12 bar 8 - 12 barAir consumption: 350 l/min 350 l/min 350 l/min 350 l/min 350 l/minWeight: 202 kg 202 kg 202 kg 202 kg 202 kg

Technical Data

Air hydraulic twin ram jacking beam

PIT JACKS

8 : PIT JACKS For more information visit: www.GarageEquipment.com.au or call 1800 777 318

PIT JACKS


GD - 1 RANGE

• Rapid and precise air hydraulic unit with high speed ram travel• Simple modern design with control panel at ergonomical working height• Can be made to fit all pits due to its adjustable frame (590 - 890 or 850 - 1150 mm)• Frame height is adjusted and set to the customers individual specifications• Fitted with leaf spring support bearings for easy glide transversing ram• Comprehensive option range: cross beam, gearbox saddle, support bridge etc.

Description GD100 - 1 GD150 - 1 GD200 - 1Capacity: 10,000 kg 15,000 kg 20,000 kgStroke: 800 mm 800 mm 800 mmMin. height: 1020 mm 1020 mm 1020 mmMax. height: 1820 mm 1820 mm 1820 mmWidth: 590 - 1150 mm 590 - 1150 mm 590 - 1150 mmDepth: 665 mm 665 mmAir supply: 8 - 12 bar 8 - 12 bar 8 - 12 barAir consumption: 350 l/min 350 l/min 350 l/minWeight: 220 kg 220 kg 220 kg

Technical Data

Standard air hydraulic single ram pit jack

GD - 2 RANGE

• 2 individually controlled rams offer safe and balanced lifting• Rapid and precise air hydraulic unit with high speed ram travel• Simple modern design with control panel at ergonomical working height• Transversely sliding rams• Can be made to fit all pits due to its adjustable frame (590 - 890 mm or 850 - 1150 mm)• Frame height is adjusted and set to the customers individual specifications• Comprehensive option range: cross beam, support bridge etc.• Supplied with 2 x100 mm extensions

Description GD100 - 2 GD150 - 2 GD200 - 2Capacity: 10,000 kg 15,000 kg 20,000 kgStroke: 420 mm 420 mm 420 mmMin. height: 525 mm 525 mm 525 mmMax. height: 945 mm 945 mm 945 mmWidth: 590 - 1150 mm 590 - 1150 mm 590 - 1150 mmDepth: 649 mm 649 mm 649 mmLifting Points (distance): 200 - 898 mm 200 - 898 mm 200 - 898 mmAir supply: 8 - 12 bar 8 - 12 bar 8 - 12 barAir consumption: 350 l/min 350 l/min 350 l/minWeight: 220 kg 220 kg 220 kg

Technical Data

Air hydraulic twin ram pit jack

PIT JACKS

10 : PIT JACKS For more information visit: www.GarageEquipment.com.au or call 1800 777 318

GGD150F

• Flexible pit jack for use both in pits and under vehicle lifts• Suitable for all traditional lifting jobs• Ideal for dismounting and re-mounting of gearboxes• Built-in manual foot pump for easy and precise adjustment• Rapid and precise air hydraulic unit with high speed ram travel• Spring loaded wheel support prevents unintended movements when lifting more than 800 kg• Dead man’s release and safety overload valve for optimum safety

Description DimensionCapacity: 15,000 kgStroke: 1285 mmMin. height: 921 mmMax. height: 2206 mmBase width: 844 mmBase depth: 1004 mmCylinder diameter: Ø 60 mmAir supply: 8,5 - 12 barAir consumption: 350 l/minWeight: 220 kg

Technical Data

Air hydraulic floor pit jack with telescopic cylinder

GGD150U

• Flexible pit jack for use in pit or under a lift• Traversing cylinder ensures a wide reach under the vehicle and enables the mechanic to move freely back and

forth in the pit• Ideal for dis- and remounting of gearboxes due to telescopic cylinder• Built-in manual foot pump for easy and precise adjustment• Rapid and precise air hydraulic unit with high speed ram travel up and down• Base frame wheels fitted with bearings for optimum manoeuvrability• Spring loaded wheel support prevents unintended movements when lifting more than 800 kg

Description DimensionCapacity: 15,000 kgStroke: 1285 mmMin. height: 921 mmMax. height: 2206 mmTraversing cylinder: 250 mmBase width / Base depth: 844 / 1074 mmCylinder diameter: Ø 60 mmAir supply: 8,5 - 12 barAir consumption: 350 l/minWeight: 250 kg

Technical Data

Air hydraulic floor pit jack with traversing telescopic cylinder


GGD150S

• Traversing ram ensures a wide reach under the vehicle and enables the mechanic to move freely back and forth in the pit

• Base frame wheels fitted with bearings for optimum manoeuvrability• Ideal for dismounting and re-mounting of gearboxes• Rapid and precise air hydraulic unit with high speed ram travel• Built-in manual foot pump for easy and precise adjustment• Foot operated leaving hands free• Dead man’s release and overload valve for optimum safety

Description DimensionCapacity: 15,000 kgStroke: 1285 mmMin. height: 905 mmMax. height: 2190 mmTraversing cylinder: 250 mmBase width / Base depth: According to pit width / 938 mmCylinder diameter: Ø 60 mmAir supply: 8,5 - 12 barAir consumption: 350 l/minWeight: 250 kg

Technical Data

Air hydraulic floor pit jack running in rails. Slim and compact design with traversing ram

JACKING BEAM & PIT JACK ACCESSORIES

12 : JACKING BEAM & PIT JACK ACCESSORIES For more information visit: www.GarageEquipment.com.au or call 1800 777 318

Cross beam adaptorIdeal for supporting axle, whilst allowing work to be done on the differential gearOffers increased safety – divides the load over 2 lifting pointsUsable with various extensions and saddles: FG100, FG200, FW2, USIncreases min. height by 90 mmFits: GD100-1 / GD150-1 / GD200-1 / GGD150F / GGD150U / GGD150S

T4 - 1

Cross beam adaptorIdeal for supporting axle, whilst allowing work to be done on the differential gearOffers increased safety – divides the load over 2 lifting pointsUsable with various extensions and saddles: FG100, FG200, FW2, USIncreases min. height by 136 mmFits: FL60-2 / FL120-2 / FL160-2 / FL200-2 / GD100-2 / GD150-2 / GD200-2

T5 - 2

Diff beamAllows use of both rams to lift at one pointFits: FL60-2 / FL120-2 / FL160-2 / FL200-2 / GD100-2 / GD150-2 / GD200-2

LB

Cross beam adaptorHand wheel on the cross beam for easy and precise adjustment of lifting saddles without moving from the pit – ideal for inspection centresUsable with various extensions and saddles: FG100, FG200, FW2, USIncreases min. height by 90 mmFits: GD100-1 / GD150-1 / GD200-1 / GGD150F / GGD150U / GGD150S

T6 - 1

Cross beam adaptorHand wheel on the cross beam for easy and precise adjustment of lifting saddles without moving from the pit – ideal for inspection centresUsable with various extensions and saddles: FG100, FG200, FW2, USIncreases min. height by 90 mmFits: FL60-2 / FL120-2 / FL160-2 / FL2002GD-100-1 / GD150-1 / GD200-1 / GGD150F / GGD150U / GGD150S

T6 - 2

TrolleyPractical trolley – designed for mounting and dismounting of heavy duty jacking beams on liftsFitted with revolving wheels for easy manoeuvrabilityFits: FL60-1 / FL120-1 / FL160-1 / FL200-1 / FL60-2 / FL120-2 / FL160-2 / FL200-2

FLTR

V-saddle - FW2Suitable for lifting under various axles

U-saddle - USSuitable for lifting various chassis profilesFits: All models

FW2 / US

Extension - FG100Increases the lifting height by 100 mm

Extension - FG200Increases the lifting height by 200 mmFits: FL60-1 / FL120-1 / FL160-1 / FL200-1 / FL60-2 / FL120-2 / FL160-2 / FL200-2 / GD100-1 / GD150-1 / GD200-1 / GD100-2 / GD150-2 / GD200-2

FG100 / FG200

Wall bracket - VB1Robust wall bracket for storage of extensions and saddles (4 pcs.)

Wall bracket - VB2Robust wall bracket for storage of extensions and saddles (8 pcs.)

VB1 / VB2

Support bridgeFor safe and stable support of the vehicleThe open frame offers optimum traversing cylinder mobilityWith leaf spring wheels for easy transport along the pitUsable with various extensions and saddles: FG100, FG200, FW2 and US

AB

Telescopic support bridgeFlexible support bridge can be used in different pits because of the adjustable widthOpening in the middle for optimum flexibility when manoeuvring the jackWith leaf spring wheels for easy transport along the pitUsable with various extensions and saddles: FG100, FG200, FW2 and US

ABT

Gearbox saddle10º tilt in all directions for accurate dismounting and re-mounting of gearboxesLow minimum height for wide range of applicationsFitted with 2 straps and 4 rubber cushions with magnetsWeight: 24,5 kgFits: GD100-1 / GD150-1 / GD200-1 / GGD150F / GGD150U / GGD150S

AS3

AXLES STANDS

14 : AXLES STANDS For more information visit: www.GarageEquipment.com.au or call 1800 777 318

AB1,5 / AB3

• Suitable for more or less all types of vehicles i.e. passenger cars, trucks, buses, agricultural and contractors’ machinery

• Adjustable in several heights (5-6 positions)• Robust construction ensures maximum stability and

long life

Standard axle stands

Description AB1.5 - 260 AB1.5 - 420 AB3 - 320Capacity: 1,500 kg 1,500 kg 3,000 kgMin. height: 260 mm 420 mm 320 mmMax. height: 450 mm 750 mm 430 mmWidth: 270 mm 430 mm 310 mmPositions: 5 5 5Net Weight: 2.2 kg 3.6 kg 3.8 kg

Technical Data

AB5 / AB8

• Suitable for more or less all types of vehicles i.e. passenger cars, trucks, buses, agricultural and contractors’ machinery


long life

Standard axle stands

Description AB5 - 365 AB8 - 310 AB8 - 360 AB8 - 580Capacity: 5,000 kg 8,000 kg 8,000 kg 8,000 kgMin. height: 365 mm 310 mm 360 mm 580 mmMax. height: 590 mm 480 mm 590 mm 950 mmWidth: 370 mm 300 mm 400 mm 600 mmPositions: 5 4 5 6Net Weight: 6.4 kg 6.5 kg 10.5 kg 15.4 kg

Technical Data

WARNING:Always use axle stands to support the vehicle before working under it.No person shall remain in, on or under a load that is being jacked or is supported only by a jack.

AXLE STANDS


Extra high axle stands

ABS8

• Especially for supporting vehicles lifted by mobile columns or inground lifts

• The spindle extension offer a quick and precise adjustment of the height

• Strong transport wheels for easy and precise manoeuvring

• Robust construction ensures maximum stability and long life

ABS5 / ABS12

• User friendly axle stand – the spindle extension offers a quick and precise adjustment of the height

• Suitable for more or less all types of vehicles• Model ABS5-230 is especially suitable for vehicles

with low clearance e.g. buses, fork lift trucks and flat trailers

• Robust construction ensures maximum stability and long life

Axle stands with spindle extension

Description ABS5 - 230 ABS12 - 320 ABS12 - 450Capacity: 5,000 kg 12,000 kg 12,000 kgMin. height: 230 mm 320 mm 450 mmMax. height: 320 mm 485 mm 725 mmWidth: 250 mm 300 mm 420 mmPositions: Spindle Spindle SpindleNet Weight: 5.0 kg 10.0 kg 14.0 kg

Technical Data

AB16

• Suitable for exceptionally heavy vehicles, e.g. large trucks, contractor’s machinery, military vehicles etc.


long life

Axle stands for the heavy lifting jobs

Description AB16 - 290 AB16 - 440 AB16 - 675Capacity: 16,000 kg 16,000 kg 16,000 kgMin. height: 290 mm 440 mm 675 mmMax. height: 455 mm 725 mm 1125 mmWidth: 310 mm 460 mm 550 mmPositions: 3 5 7Net Weight: 15.0 kg 20.0 kg 30.0 kg

Technical Data

Description ABS8 - 950 ABS8 - 1400Capacity: 8,000 kg 8,000 kgMin. height: 950 mm 1400 mmMax. height: 1550 mm 2000 mmWidth: 650 mm 880 mmPositions: Spindle SpindleNet Weight: 29.5 kg 35.0 kg

Technical Data

ABS8 - 950

ABS8 - 1400

AIR HYDRAULIC JACKS

16 : AIR HYDRAULIC JACKS For more information visit: www.GarageEquipment.com.au or call 1800 777 318

AIR HYDRAULIC JACKS


25-1 / 25-1TH

• Minimum height of 221 mm• Designed for heavy-duty, intensive commercial use• Hard chromium plated piston rod for long life• Built-in safety overload valve

Description DimensionCapacity: 25,000 kgMin. height: 220 mmMax. height: 345 mmFrame length: 770 mmHandle length: 1355 mmWidth: 160 mmWidth (with wheels): 305 mmAir supply: 9 - 12 barAir consumption: 350 l/minWeight: 62 kg

Technical Data

• Hand-operated dead-man’s control for optimum safety whilst lifting and lowering

• 25-1TH model with telescopic handle increasing the reach under the vehicle to 2125 mm ensuring safe and easy operation

• With 2 extensions (50/100 mm)

Single stage air hydraulic jack for heavy plant machinery and trucks

25-1H / 25-1HTH

• Minimum height of 360 mm• Maximum height of 610 mm, the F250 (optional)

extension offers a total extended height of 860 mm• Hard chromium plated piston rod for long life• Built-in safety overload valve


Technical Data


• 25-1HTH model with telescopic handle increasing the reach under the vehicle to 2170 mm ensuring safe and easy operation


Single stage air hydraulic jack for agricultural and contractors’ machinery, trailers and other high clearance applications

Description DimensionCapacity: 25,000 / 10,000 kgMin. height: 161 mmMax. height: 234 / 317 mmFrame length: 534 mmHandle length: 550 mmWidth (with wheels): 292 mmAir supply: 9 - 12 barAir consumption: 350 l/minWeight: 27 kg

Technical Data

Portable air hydraulic jack – ideal for service vans etc.

B25-2

• Low minimum height of only 162 mm and low weight of only 27 kg

• Handy design - no loose tubes, handles or valves• Easy to operate – handle can be used for carrying,

lifting, lowering and manoeuvring• Hard chromium plated piston rod for long life• Built-in safety overload valve• Hand-operated dead-man’s control for optimum

safety whilst lifting and lowering• Transport locking device / wall bracket for both van

and workshop (Option)• With 2 extensions (50/100 mm)

AIR HYDRAULIC JACKS


50-2 / 50-2TH


Description DimensionCapacity: 50,000 / 25,000 kgMin. height: 221 mmMax. height: 338 / 447 mmFrame length: 812 mmHandle length: 1355 mmWidth: 202 mmWidth (with wheels): 313 mmAir supply: 9 - 12 barAir consumption: 350 l/minWeight: 80 kg

Technical Data




2-stage air hydraulic jack for heavy buses and trucks

50-3 / 50-3TH

• Minimum height of only 151 mm combined with a high lifting capacity

• Telescopic cylinders ensure an excellent maximum lift together with a low closed height

• Designed for heavy-duty, intensive commercial use

Description DimensionCapacity: 50,000 / 25,000 / 10,000 kgMin. height: 151 mmMax. height: 211 / 264 / 333 mmFrame length: 810 mmHandle length: 1355 mmWidth: 202 mmWidth (with wheels): 308 mmAir supply: 9 - 12 barAir consumption: 350 l/minWeight: 67 kg

Technical Data

• Built-in safety overload valve• Hand-operated dead-man’s control for optimum

safety whilst lifting and lowering• 50-3TH model with telescopic handle increasing the

reach under the vehicle to 2165 mm ensuring safe and easy operation


3-stage air hydraulic jack for low buses and other low clearance vehicles

50-3H / 50-3HTH

• Minimum height of 221 mm and high maximum height of 560 mm

• Designed for heavy-duty, intensive commercial use• Hard chromium plated piston rod for long life• Built-in safety overload valve

Description DimensionCapacity: 50,000 / 25,000 / 10,000 kgMin. height: 221 mmMax. height: 338 / 447 / 560 mmFrame length: 810 mmHandle length: 1355 mmWidth: 202 mmWidth (with wheels): 312 mmAir supply: 9 - 12 barAir consumption: 350 l/minWeight: 73 kg

Technical Data

• Hand-operated dead-man’s control for optimum safety by lifting and lowering

• 50-3HTH model with telescopic handle increasing the reach under the vehicle to 2165 mm ensuring safe and easy operation

• For safety reasons extensions are not included

3-stage air hydraulic jack for high clearance vehicles

25-2 / 25-2TH


Description DimensionCapacity: 25,000 / 10,000 kgMin. height: 183 mmMax. height: 275 / 377 mmFrame length: 768 mmHandle length: 1355 mmWidth: 161 mmWidth (with wheels): 307 mmAir supply: 9 - 12 barAir consumption: 350 l/minWeight: 60 kg

Technical Data




Versatile 2-stage air hydraulic jack for buses and trucks


65-1 / 65-1TH

• Minimum height of 245 mm with an extremely high capacity of 65 t

• Designed for heavy-duty, intensive commercial use• Hard chromium plated piston rod for long life• Built-in safety overload valve


Technical Data



• Supplied with 2 extensions (100/200 mm) and pneumatic tyres

Air hydraulic jack for heavy contractors’ machinery

65-1H / 65-1HTH

• Minimum height of 423 mm• Maximum height of 724 mm and with extensions up

to 1024 mm• Designed for heavy-duty, intensive commercial use• Hard chromium plated piston rod for long life


Technical Data

• Built-in safety overload valve• Hand-operated dead-man’s control for optimum

safety whilst lifting and lowering• 65-1HTH model with telescopic handle increasing the

reach under the vehicle to 2337 mm ensuring safe and easy operation


Air hydraulic jack for heavy duty applications with high clearanceSBB

Transport locking device and wall bracket for B25-2

F250

Increase the maximum height by 250 mm

FW

Suitable for lifting under bolts, differential gear etc

FW1

For lifting under different types of axles

Air Hydraulic JacksAccessories

AIRCRAFT JACKS

20 : AIRCRAFT JACKS For more information visit: www.GarageEquipment.com.au or call 1800 777 318

AIRCRAFT JACKS


65-1AP

• Compact and slim design for easy operation and manoeuvrability

• Telescopic handle increases the reach under the aircraft to 2170 mm and offers easy and safe operation

• The jack can be operated by either compressed-air, nitrogen from the aircraft wheels or a mobile nitrogen service cart

• Fitted with extension screw (80 mm) for optimum use of the stroke

• Rapid ram retraction without load• Safety features include manual lowering valve, safety

overload valve and dead mans release

Air hydraulic aircraft jack

Description DimensionCapacity: 65,000 kgMin. height: 269 mmMax. height: 431 mmFrame length: 810 mmHandle length: 950 - 1360 mmWidth: 200 mmWidth (with wheels): 310 mmAir supply: 9 - 12 barAir consumption: 350 l/minWeight: 85 kg

Technical Data

25-2AP

• Compact and slim design for easy operation and manoeuvrability

• Telescopic handle increases the reach under the aircraft to 2125 mm and offers easy and safe operation

• The jack can be operated by either compressed-air, nitrogen from the aircraft wheels or a mobile nitrogen service cart

• Rapid ram retraction without load• Safety features include manual lowering valve, safety

overload valve and dead mans release

Air hydraulic aircraft jack

Description DimensionCapacity: 25,000 / 10,000 kgMin. height: 180 mmMax. height: 260 / 364 mmFrame length: 765 mmHandle length: 950 - 1360 mmWidth: 160 mmWidth (with wheels): 310 mmAir supply: 9 - 12 barAir consumption: 350 l/minWeight: 56 kg

Technical Data

HYDRAULIC JACKS

22 : HYDRAULIC JACKS For more information visit: www.GarageEquipment.com.au or call 1800 777 318

HYDRAULIC JACKS


DK20 / DK20Q

• Very low minimum height of only 80 mm• Wide and robust frame made of high-strength steel• Precise and safe control whilst lowering• Manual dead man’s release for optimum safety when

lowering• Built-in safety overload valve

Description DK20 DK20QCapacity: 2,000 kg 2,000 kgMin. height: 80 mm 80 mmMax. height: 495 mm 495 mmFrame length: 660 mm 660 mmHandle length: 950 mm 950 mmFame length: 160 mm 160 mmWidth: 410 mm 410 mmWeight: 31 kg 31 kg

Technical Data

• Noiseless wheels incorporating a polyurethane central O ring offers maximum surface protection

• Ergonomically designed handle ensuring positive and safe operation

• DK20Q is fitted with quick-lift pedal for easy reach of lifting point

Jack for passenger cars and vans

DK13HLQ

• Very low minimum height of only 80 mm• Wide and robust frame made of high-strength steel• Fitted with quick-lift pedal for easy reach of lifting

point• Precise and safe control whilst lowering• Manual dead man’s release for optimum safety when

lowering

Description DimensionCapacity: 1,300 kgMin. height: 80 mmMax. height: 735 mmFrame length: 940 mmHandle length: 950 mmFame length: 160 mmWidth: 480 mmWeight: 39 kg

Technical Data

• Built-in safety overload valve• Noiseless wheels incorporating a polyurethane

central O ring offers maximum surface protection• Ergonomically designed handle ensuring positive

and safe operation

High lifter with long reach, ideal for cars with low clearance

DK20HLQ

• Very low minimum height of only 80 mm• Wide and robust frame made of high-strength steel• Fitted with quick-lift pedal for easy reach of lifting

point• Precise and safe control whilst lowering• Manual dead man’s release for optimum safety when

lowering


Technical Data

• Built-in safety overload valve• Noiseless wheels incorporating a polyurethane

central O ring offers maximum surface protection• Ergonomically designed handle ensuring positive

and safe operation

High lifting jack ideal for SUVs and vans

DK50HLQ

• Low minimum height of only 140 mm• Can be fitted with pneumatic tyres for easy

manoeuvring (option)• Wide and robust frame made of high-strength steel• Fitted with quick-lift pedal for easy reach of lifting

point• Precise and safe control whilst lowering


Technical Data

• Manual dead man’s release for optimum safety when lowering

• Built-in safety overload valve• Ergonomically designed handle ensuring positive

and safe operation

High lifting jack for trucks, agricultural machinery & contractor’s machines

AIR HYDRAULIC JACKS


DK40Q / DK60Q

• Very low minimum height of only 80 mm• Wide and robust frame made of high-strength steel• Precise and safe control whilst lowering• Manual dead man’s release for optimum safety when

lowering• Built-in safety overload valve

Description DK40Q DK60QCapacity: 4,000 kg 6,000 kgMin. height: 140 mm 140 mmMax. height: 600 mm 600 mmFrame length: 800 mm 800 mmHandle length: 950 mm 1200 mmFame length: 240 mm 240 mmWidth: 500 mm 500 mmWeight: 95 kg 95 kg

Technical Data

• Noiseless wheels incorporating a polyurethane central O ring offers maximum surface protection

• Ergonomically designed handle ensuring positive and safe operation

• DK20Q is fitted with quick-lift pedal for easy reach of lifting point

Jack for light commercial vehicles

DK100Q / DK120Q

• Low minimum height of only 150 mm• Can be fitted with pneumatic tyres for easy

manoeuvring (option)• Wide and robust frame made of high-strength steel• Fitted with quick-lift pedal for easy reach of lifting

point• Precise and safe control whilst lowering

Description DK100Q DK120QCapacity: 10,000 kg 12,000 kgMin. height: 150 mm 150 mmMax. height: 585 mm 585 mmFrame length: 805 mm 805 mmHandle length: 1200 mm 1200 mmFame length: 260 mm 260 mmWidth: 530 mm 530 mmWeight: 118 kg 118 kg

Technical Data

• Manual dead man’s release for optimum safety when lowering

• Built-in safety overload valve• Ergonomically designed handle ensuring positive

and safe operation

Jack for trucks, agricultural machinery & contractor’s machines

T3

Cross beam adaptor - Lifts the car for change of both wheels at the same time

G4

High quality pneumatic tyres

GS1

Rubber cushion - For protection of car body

FDK1

Extension for cars with high clearance (100 mm)

FDK2

Extension for cars with high clearance (125 mm)

Hydraulic JacksAccessories

WHEEL TROLLEYS

26 : WHEEL TROLLEYS For more information visit: www.GarageEquipment.com.au or call 1800 777 318

WHEEL TROLLEYS


Description DimensionCapacity: 500 kgHeight: 1182 mmLength: 870 mmWidth: 989 mmRoller-/fork length: 416 / 600 mmRoller distance: 260 - 710 mmLifting height: 717 mmWheel size: Ø 270 - 1300 mmWeight: 100 kg

Technical Data

Hydraulic wheel trolley for vans, trucks and buses

WTA-500

• Flexible and ergonomic wheel trolley for the easy removal of wheels and brake drums

• Adjustable lifting arms for wheel sizes Ø 270 – 1300 mm

• Lifting arms with roller bearings for easy rotation of the wheel into correct position

• Pedal operated pump leaving both hands free for working

• Bracket for easy securing of the wheel whilst transporting

• Hand operated dead man’s release for optimum safety whilst lowering

• Ideal for lifting brake drums, fuel tanks, tool boxes etc.

• With 2 pcs. 360º revolving wheels

Mechanical wheel trolley for tractors, agricultural and contractor’s machinery

WT-1500

Description DimensionCapacity: 1,500 kgHeight: 1360 mmLength: 1160 mmWidth: 1360 - 2380 mmRoller length: 740 mmRoller distance: 720 - 1380 mmRoller diameter: Ø 80 mmWheel size: Ø 920 - 2300 mmWeight: 150 kg

Technical Data

• Ergonomically designed for the easy and efficient removal of large wheels - also deep-treaded tractor tyres

• Side-adjustable lifting arms for wheel diameters ranging 920-2300 mm

• Robust safety wheel retaining bracket for the safe manoeuvring of the trolley

• Precise and easy lifting and lowering by means of mechanical operation

• Excellent manoeuvrability due to the 4 large, heavy-duty revolving wheels

• Lifting arms fitted with 3 roller bearings for ensuring the easy location of wheels

CRANES

28 : CRANES For more information visit: www.GarageEquipment.com.au or call 1800 777 318

CRANES


WJN5 / WJN10

• Foldable within seconds for quick and easy storage• When folded the crane takes up a minimum of space

on the workshop floor• Jib arm with large lifting capacity – even in 5th

position

Description WJN5 WJN10Capacity: 550 kg 1,100 kgLifting height: 2020 - 2340 mm 2020 - 2340 mmjib arm: 955 - 1375 mm 955 - 1375 mmFrame height: 125 mm 125 mmFrame length: 1420 mm 1420 mmHeight: 1520 mm 1520 mmInner width: 955 mm 985 mmFrame width: 1080 mm 1110 mmWeight: 75 kg 95 kg

Technical Data

• Hard chromium plated piston rod and pump piston for long life

• Built-in safety overload valve• Fitted with 2 castors and 2 fixed wheels for easy

manoeuvrability even with maximum load• Lifting hook pivots 360ºt• Hand operated dead man’s release for optimum

safety whilst lowering

Hydraulic workshop crane for auto workshops and service vans

WJN5EUR / WJN10EUR

• Foldable within seconds for quick and easy storage• When folded the crane takes up a minimum of space

on the workshop floor• Jib arm with large lifting capacity – even in 5th

position

Description WJN5EUR WJN10EURCapacity: 550 kg 1,100 kgLifting height: 2020 - 2340 mm 2020 - 2340 mmjib arm: 955 - 1375 mm 955 - 1375 mmFrame height: 125 mm 125 mmFrame length: 1420 mm 1420 mmHeight: 1520 mm 1520 mmInner width: 975 mm 1015 mmFrame width: 1100 mm 1140 mmWeight: 75 kg 95 kg

Technical Data

• Hard chromium plated piston rod and pump piston for long life

• Built-in safety overload valve• Fitted with 2 castors and 2 fixed wheels for easy

manoeuvrability even with maximum load• Lifting hook pivots 360º• Hand operated dead man’s release for optimum


Hydraulic workshop crane with parallel legs for pallets

WN11 / WN15

• Commercial crane fitted with hard chromium plated piston rod and pump piston for longer life

• Jib arm with large lifting capacity – even in 5th position

• Pump rotates 360º for excellent operation in all working conditions

Description WN11 WN15Capacity: 1,100 kg 1,500 kgLifting height: 2260 - 2540 mm 2260 - 2540 mmjib arm: 1210 - 1630 mm 1210 - 1630 mmFrame height: 160 mm 160 mmFrame length: 1750 mm 1750 mmHeight: 1690 mm 1690 mmInner width: 820 mm 820 mmFrame width: 1000 mm 1000 mmWeight: 168 kg 175 kg

Technical Data

• Built-in safety overload valve• Wheels revolve 360º for easy manoeuvrability even

with maximum load• Lifting hook pivots 360º• Hand operated dead man’s release for optimum

safety whilst lowering• Inner frame width enables use with Euro pallets

Hydraulic workshop crane for auto workshops and industry

WN20 / WN25

• Commercial crane fitted with hard chromium plated piston rod and pump piston for long life

• Jib arm with large lifting capacity – even in 5th position

• Pump rotates through 360º for excellent operation in all working conditions

Description WN20 WN25Capacity: 2,000 kg 2,500 kgLifting height: 2340 - 2630 mm 2340 - 2630 mmjib arm: 1210 - 1630 mm 1210 - 1630 mmFrame height: 160 mm 160 mmFrame length: 1750 mm 1750 mmHeight: 1850 mm 1850 mmInner width: 840 mm 840 mmFrame width: 1020 mm 1020 mmWeight: 250 kg 255 kg

Technical Data

• Built-in safety overload valve• Wheels revolve 360º for easy manoeuvrability even

with maximum load• Lifting hook pivots 360º• Hand operated dead man’s release for optimum

safety whilst lowering• Inner frame width enables use with Euro pallets

Hydraulic workshop crane for auto workshops and industry

TRANSMISSION JACKS

30 : TRANSMISSION JACKS For more information visit: www.GarageEquipment.com.au or call 1800 777 318

Description VL3 VL6 VL10Capacity: 300 kg 600 kg 1,000 kgMin. height: 1130 mm 1130 mm 1170 mmMax. height: 1965 mm 1965 mm 2000 mmWidth: 530 mm 530 mm 550 mmWeight: 33 kg 33 kg 40 kgWheel diameter Ø 80 mm Ø 80 mm Ø 125 mm

Technical Data

Hydraulic transmission jack

VL3 / VL6 / VL10

• Pedal operated pump leaving both hands free for working

• Precise adjustment for positioning of transmission• Hand operated dead man’s release for optimum

safety whilst lowering• Galvanised support saddle and base frame• Built-in safety overload valve• Sturdy swivel castors for optimum stability and

manoeuvrability• Hard chromium plated piston rod and pump piston

for long life• Also suitable for many other lifting operations such

as mounting of springs, fuel tanks, exhaust pipes etc.

TRANSMISSIONJACKS


VLT6

• The 3 stage telescopic cylinder ensures a very low minimum height

• 5 legs offers the best stability on the market• Simple operation by use of 3 pedals leaving both

hands free for working

Description DimensionCapacity: 600 kgStroke: 1195 mmMin. height: 720 mmMax. height: 1915 mmHeight step 1/2/3 1120 mm / 1520 mm / 1915 mmAir capacity step 1/2/3 200 kg / 120 kg / 60 kgWidth: 950 mmWheel size: Ø 125Air supply: 8,5-12 barWeight: 55 kg

Technical Data

• Pneumatically controlled high speed guarantees quick and efficient lifting

• Large and robust swiveling wheels (2 with locks) offers optimum manoeuvrability

• Built-in safety overload valve

Transmission jack with pneumatically controlled high speed

VLT12

• Especially for lifting heavy truck transmissions• Ideal for workshop pits due to low minimum height

and long stroke• Pedal operated pump with built-in quick lift leaving

both hands free for working• Precise adjustment for positioning of transmission• Hand operated dead man’s release for optimum


Description DimensionCapacity: 1,200 kgMin. height: 905 mmMax. height: 1920 mmWidth: 720 mmWheel diameter: Ø 125Weight: 70 kg

Technical Data

• Galvanised support saddle and base frame• Built-in safety overload valve• Sturdy swivel castors (2 lockable) for optimum

stability and manoeuvrability

Hydraulic transmission jack with telescopic cylinder

AS1 AS3

Gearbox saddle

Gearbox saddle

• Capacity: 0.5 h• Dimension: 352 x 307 x 118 mm• Can be tilted + / - 10 º in all directions for precise removal and installation

of passenger car transmissions• Incl. 2 straps and 2 magnetic rubber pads• Weight: 18.5 kg

• Capacity: 1 t• Dimension: 542x385x110 mm• 10º tilt in all directions for accurate dismounting and re-mounting of

gearboxes• Low minimum height for wide range of applications• Fitted with 2 straps and 4 magnetic rubber support blocks• Weight: 24,5 kg• Fits: GD-1, GGD, VL10 & VLT12

S GS1 / GS2

Saddle Rubber cushion

• Suitable for mounting springs, fuel tanks, exhaust pipes etc. • For protection of car body

LIFTING EQUIPMENT ACCESSORIES

32 : LIFTING EQUIPMENT ACCESSORIES For more information visit: www.GarageEquipment.com.au or call 1800 777 318

ExtensionIncreases the lifting height by 130 mm (order 2 units)Fits: SD20l, SD26l, SD20PHl, SD26PHl, SD20PHl-a, SD26PHl-a

FSD1

Rubber supportBlock for protection of car body (40 mm) (order 2 units)Fits: all jacking beams

FSD2

Rubber supportBlock for protection of car body (80 mm)(order 2 units)Fits: all jacking beams

FSD3

Saddle with spindleIncreases the lifting height by 106-240 mm. (order 2 units)Fits: SD20l, SD26l, SD20PHl, SD26PHl, SD20PHl-a, SD26PHl-a

FSD5

Adjustable saddleIncreases the lifting height by 32-92 mm(order 2 units)Fits: SD20l, SD26l, SD20PHl, SD26PHl

FSD6

ExtensionFor FSD6 increases the lifting height by 60 mm(order 2 units)Fits: SD20l, SD26l, SD20PHl, SD26PHl

FSD7

Air-line connection - HSD Set for jacking beam Fits: SD20PHl, SD26PHl, SD40PHl

Air-line connection - HSD-ASet for automatic jacking beamFits: SD20PHl-a, SD26PHl-a

HSD / HSD-A

Crane arm for disc brakes, callipers, etc. (Option)Mounted with the telescopic crane arm the wheel trolley is a universal lifting tool.The crane arm offers efficiency and good ergonomics when lifting disc brakes, brake drums, callipers, etc. The crane arm easily swivels to one side to allow wheel removal operations to be carried out. Fitted with 360º pivoting hook

WTK

Integrated safety standMechanical locking of the load prevents unintended lowering adjustable in 6 positions.Increases the minimum height of the pit jack by 65 mm Fits: gD100-1, gD150-1, gD200-1

S200

Lifting EquipmentAccessories

P/ 1800 777 318 F/ 1300 785 737

E/ [email protected] W/ www.garageequipment.com.au

17 Canberra Street, Hemmant QLD 4174 PO Box 7120, Hemmant QLD 4174

lifting equipment contents · lifting equipment catalogue 9 gd - 1 range • rapid and precise air...

Documents