lighting intelligence catalogue · • the ultimate brighter space design ... 13xx modules / 25xx...

Lighting Intelligence

Catalogue

With a wide range of lighting controls products, we design open and flexible solutions for lighting installation, programming and use. They’re fast to install. Easy to adapt. And always right up-to-date.

Since 1921, it’s been our primary goal to offer the highest standard of service. Today we support our customers through a network of competence centres and partners spanning more than 40 countries.

You’ll find Helvar lighting control solutions in all sorts of places — from hotels, schools and offices to Istanbul’s new Third Airport (the largest in the world) and Symphony of the Seas, described as ‘the greatest cruise ship of all time’.

We’ll be with you every step of the journey; during consultation, design, implementation and servicing. Making us the easiest and smartest partner for you.

World leaders in lighting intelligence

2 Helvar | Lighting Intelligence Catalogue

6 easySwitch 8 DIGIDIM10 ILLUSTRIS14 Imagine26 Designer software28 SceneSet30 uSee & Integration

We love to improve our products. See what’s new at helvar.com 3

© H

eljä

Kor

kala

Single room, entire floor — or much more?Helvar systems are designed to be open. When you choose Helvar, you’re investing in scalable and future-proof kit. That means almost everything we make is compatible. But to help you find what you need more easily, we’ve grouped our range into four families.

Do you want lighting control for one room? A whole floor? Or across an entire building, cruise liner or campus? That’s the first question we ask.


© H

ufto

n+Cr

ow

Complex site lighting control.Imagine• The ultimate brighter space design• Super-flexible — from single rooms to megastructures• Realtime energy monitoring and app-based fine-tuning• Bespoke automation, transitions and scenes


One room. Super simple.easySwitch• A standalone answer• Simple on-off• Wires into the mains• Easy to install• Low cost, fast payback

1

2 All (or part) of a floor.DIGIDIM• Program any section or area• Control small rooms to very big spaces• Stay in tune with circadian rhythms• Give local users touch-panel control• Speaks to AV systems and blinds

3


SS-PIR-SW-01

SF-PIR-SW-01

Switched

Switched

PIR

PIR

•

•

10 secs - 40 mins (9 steps)

10 secs - 40 mins (9 steps)

Presence or absence detection modes

Presence or absence detection modes

Standalone sensors

Control output

Motion detector

Lux sensor

Time-out CommentsMotion detection areaFunctionality

Easyswitch sensors

7m

2.8m

7m

2.8m2.8 m

7 m

2.8 m

7 m

Simple and easy to install, these standalone products are ideal for corridors, washrooms and small offices.

What it includes:• Simple on/off• Standalone• Mains switching• Easy to install and set-up• Low cost with fast payback

easySwitch

easySwitch


SS-PIR-SW-01 SF-PIR-SW-01

TK4

SS-PIR-SW-O1 Surface mount PIR switching sensor• A standalone mains switching sensor• Presence and absence modes• Up to 7m diameter coverage• Set for lux and timeout• Just mount to a ceiling or backboxNote: this sensor isn’t DALI compatible.

SF-PIR-SW-O1 Flush mount PIR switching sensor• A standalone mains switching sensor• Presence and absence modes• Up to 7m diameter coverage• Set for lux and timeout• Mounts flush within the ceilingNote: this sensor isn’t DALI compatible.

TK4 1-10V ballast controls• Offers EN 60929 (1-10V) ballast control• High power mains switch• Intuitive slider• Last-level memory• Works with any TK4 or Digidim panel


13XX Panel 452 Universal Dimmer

LED Driver 313 Sensor

405 Dali Repeater 317 Sensor

510 USB to DALI Interface

402 DALI Power Supply

How DIGIDIM fits together

DIGIDIM

Tailor intelligent lighting control with this programmable DALI-based system.From single rooms to large areas, DIGIDIM has a wide range of load and user interfaces. Versatile enough for everything from education to open-plan offices.


DIGIDIM key features• Dimmers and output units for any common load type• Flexible design with chassis based, DIN-rail and

wall-mounted enclosures• Standard mains cables for DALI• Control panels available in a wide range of finishes• User-friendly configuration software

System boundaries• Supports up to 64 DALI devices• 250mA DALI supply per system. For extra power,

use Helvar 405 or 406 DALI repeater• Each system may be configured with up to 16 groups• Each load may be programmed with up to 15 scenes

321 Sensor

472 1-10 V / DSI Converter

503 AV-Interface

494 Relay Unit

434 Enocean® Gateway 18XX Enocean® Panel

DALI Ballast

How DIGIDIM fits together


13xx Modules / 23xx Frames

13xx Modules / 25xx Frames

1xx Modules / 2xx Frames 1xx Modules / 2xx Frames Modular Panels• Fully DALI compatible range• Allow basic control of the system• The range includes push button, rotary and slider controls in a

range of panel finishes• Indicator LED and infrared receiver• Out of box operation• Fits DIN and UK standard back boxes• Double gang version can take up to 3 independent

module types

13xx Modules / 23xx Frames Modular Panels • Fully DALI compatible range of user interfaces with modern

styling• Allow basic control of the system• The range includes a wide variety of buttons arrangements• The button panels are complemented by a range of panel

finishes• Indicator LED and infrared receiver• Out of box operation• Designed to fit both DIN and UK standard back boxes• Double gang version can take up to 3 independent

module types

13xx Modules / 25xx Frames Modular Panels • Fully DALI compatible range of user interfaces with modern

styling• Allow basic control of the system• The range includes a wide variety of buttons arrangements• The button panels are complemented by a range of panel

finishes• Indicator LED and infrared receiver• Out of box operation• Designed to fit Australian standard back boxes

Control panels

16xxx Control Panels16xxx series is a range of DALI compatible button panels that allow control of the system. The buttons have LEDs indicating the selected scene. Each module is fitted with an infrared receiver that gives the option of remote operation using remote control.

• Fully DALI-compatible range• Allow basic control of the system• Range of switch combinations• Indicator LED with programmable brightness• Infrared receiver for DIGIDIM hand-held remote control• Out-of-box operation• Suitable for UK back box only

18xx enocean® SwitchesThe 18xx wireless switch modules are an enocean®-compatible range of user interfaces that allow control of the system. Designed to work with the Helvar enocean® Gateway, each switch is fully programmable in Designer or Toolbox.

Key features• Choice of single or dual rocker, and black (B) or white (W)

modules• Self powered batteryless and wireless• enocean® RF technology• Easy installation: double-sided mounting pad (enclosed) or

screwed onto flat surface

19xxx Front Fascia / 29x Rear Unit ILLUSTRIS• Capacitive touch control panel• DALI Type 8 compatible range• Intensity, colour temperature and RGB colour control options• Out of box operation• Indicator LEDs• Bluetooth connectivity for control and scene editing from mobile

device or tablet• Two part construction including decorators cover for Rear Unit• Glass or plastic front fascia.• Haptic feedback• Designed to fit both DIN and UK standard single back boxes


18xx

19xxx Front Fascia / 29x Rear Unit

16xxx


Scene Selection Colour temperature control

Key features• Works standalone or in a

networked system• Easy set-up straight from the box• Create and recall four lighting

scenes• Touch sensitive control with haptic

feedback• DALI Type 6 and Type 8 compatible• Allows CT and x-y colour

presentation• Available in a variety of front

fascias for different controls• Glass and plastic front fascia

finishes• App control via SceneSet mobile

app (iOS and Android)• Designed to fit DIN, UK and similar

backboxes

ILLUSTRIS®Control your DALI lighting at a touch.Bespoke scenes. Haptic feedback. And Bluetooth connectivity to our own SceneSet app.ILLUSTRIS gives you out-of-box control of DALI Type 6 dimmable and Type 8 colour devices.It’s the most natural way to manage your intelligent lighting.

App connectivity• Connect to ILLUSTRIS over Bluetooth

with our SceneSet app• Full lighting control from iOS or Android• The app mirrors panel controls• Standard or admin logins for security• Change lighting settings in the panel

or app

ILLUSTRIS

All the above features plus:• Compact DALI power supply• Discreet and easy to install• Fits inside DIN, UK and similar

backboxes• Over temperature protected• DALI network compatible

ILLUSTRISPOWERFeature-rich user interface and power supply.

STAND-ALONE ROOM SOLUTION

452 1000 W, Universal DimmerSingle-channel universal dimmer, suitable for leading or trailing-edge loads including mains-dimmable LED. The dimmer is a DIN-rail mounted unit that can control a maximum load of 1000 W. Out-of-box operation. No programming required when using DIGIDIM slider, rotary, or push button panels.

Key features• Status LED• Switch for load selection• Switch for manual DALI group selection• Over current and temperature protection

454 4 x 500W Transistor DimmerThe DIN rail mounted 454 is a 4-channel transistor dimmer. It can operate in one of two modes; leading edge or trailing edge. All 4 channels operate in the same selected mode, with each channel capable of controlling 2.2 A. Each channel of the dimmer has both current and thermal protection.

Key features• Suitable for mains-dimmable LED (check with Helvar for

compatability)• Capable of handling resistive and capacitive loads• Manual configuration via LED display and push buttons• Wired volt-free override input• Voltage and frequency compensation• Over current and temperature protection


452 454

DIN rail dimmers


478

472

474

DIN rail controllers

472 1-10 V / DSI ConverterDALI to 1-10 V / DSI® converter. Switch a maximum of 15 electronic ballasts or LED drivers. The analogue 1-10 V / digital DSI signal can control up to 50 electronic ballasts.

Key features• Switch for manual DALI group selection• 1-10 V & DSI® output for 50 ballasts / LED drivers• Status LED

DSI® is a registered trademark of Tridonic

474 4-Channel Ballast Controller4-channel DALI to 0/1-10 V / DSI® / PWM converter, suitable for controlling electronic ballasts and LED drivers, fitted with high inrush relays rated at 16 A per channel, which handle short-lived high peak currents during switch on of loads. The outputs can be configured independent of, or paired with relay channels.

Key features• High inrush relays• Wired override input to allow for external triggers• LED segment display and push buttons• Multiple output configurations of either:

0 - 10 V source 10 mA1 - 10 V sink 100 mA DALI-broadcast- / DSI®- / PWM source 100 mA

• DALI / S-DIM / DMX control inputs

DSI® is a registered trademark of Tridonic

478 8-Subnet DALI Controller8-subnet DALI Controller, suitable for controlling ballasts/drivers when device addressing is not required. This reduces commissioning and maintenance cost, as failed devices can be simply replaced. The flexible control inputs support multiple protocols, by routing an input address/group to its corresponding subnet output.

Key features• Control using DALI Broadcast messages on each subnet• Integral DALI Power Supply – supports up to 512 DALI devices

(2 mA per driver/ballast)• Lamp failure reporting per subnet (when supported by

DALI devices)• Lower commissioning costs - device addressing/grouping on

subnet not required• DALI / S-DIM / DMX control inputs


494

492

490

Relay controllers

490 2-Channel Blinds Controller Two-channel blinds controller, designed for control of blinds and curtains. Two independent control channels each with two single pole, volt free contacts for switching up / down or power / direction motors. Programmable “blind travel time”.

Key features• “Break before Make” operation to prevent motor damage• Isolated mains rated relays, normally open and volt-free• Status LED

494 4-Channel Relay UnitFour channel DALI Relay Unit, designed to allow control of non-dimmable loads. The relay unit is a DIN-rail mounted unit that has four individually programmable relays. The relays are ‘normally open’, volt free and can switch up to 10 A resistive loads.

Key features• Isolated relays, normally open and volt free• Manual override • Status LED

492 16 A 1-channel Relay UnitSingle channel relay unit, designed to allow control of non-DALI, non-dimmable loads. The relay is a latching, volt-free contact, high inrush type, with a contact rating of 16 A. The unit forms a DALI relay node with a typical current consumption of 2 mA, and is programmable as a single channel relay by Helvar’s lighting design software, Designer and Toolbox.

Key features• High power switching capability (16 A)• High inrush relay• Compact size for luminaire, electrical panel or in-line

mounting• Secure strain relief

493 1-Channel Signal Relay Unit Single channel relay unit, designed to allow interfacing with other building control and management systems. The relay is a solid-state, normally open signal relay, with a contact rating of 60 VAC or VDC, at a maximum of 0.5 A. The unit forms a DALI relay node with a typical current consumption of 10 mA, and is programmable as a single channel relay by Helvar’s lighting design software, Designer and Toolbox.

Key features• Low power switching capability (0.1 mA to 0.5 A; 60 V)• Solid state low-current relay• Compact size for electrical panel or in-line mounting• Secure strain relief

498 8-Channel Relay UnitEight-channel Relay Unit, fitted with individually programmable high-inrush relays to allow control of non-dimmable loads. The relay unit is DIN-rail mounted. The relays are ‘normally open’, volt-free relays rated at 16 A per channel. The relay unit has DALI, DMX, and S-DIM ports.

Key features• LED display and control buttons • High-inrush relays• Override input for external triggers• DALI / S-DIM / DMX control inputs

499 8-Channel Latching Relay Unit The 8-Channel Latching Relay Unit is an eight channelcontroller that supports high-inrush loads up to 20 A per output. Each output is controlled individually, and any mains-supply phase can be connected on any of them.

Key features• Latching single-pole relays with manual switch control.

Maximum load: 20A per output, 160A total• Can operate as 8 individual channels, 4 sets of 2 channels, or 2

sets of 4 channels• Staggered switch-on to reduce inrush current• Local configuration via LED-segment display and push buttons


499

493

498

Relay controllers

458/DIM4 or DIM8 4/8 Channel Thyristor Dimmer Modules Multi-channel thyristor dimmer modules, capable of leading-edge dimming of resistive and inductive loads. Each module has 4 or 8 channels rated at 10A with a total current capacity of 40A and 48A respectively. Each module has DALI, S-DIM and DMX interfaces for integration into DIGIDIM and Router systems.

Key features• Module connects to any 458xx mechanical chassis• LCD display screen with navigation keys• Built-in power supply for DALI systems if required• DALI / S-DIM / DMX control inputs

458/UNI8 8 Channel Universal Dimmer Module Eight channel transistor dimmer module for leading or trailing edge dimming. The module is compatible with the majority of load types including Incandescent, mains dimmable LED lamps and LED drivers. The module’s 8 channels can be individually selected as leading or trailing edge, and are rated at 6A each. The module has DALI, S-DIM and DMX interfaces for integration into DIGIDIM and Router systems.

Key features• Module connects to any 458xx mechanical chassis• LCD display screen with navigation keys• DALI / S-DIM / DMX control inputs• Active bottom load

458/CTR8 or SW8 8 Channel Ballast or Switching Control ModulesEight channel ballast control module (458/CTR8), capable of controlling either 0-10V, 1-10V, DSI, DALI broadcast or PWM loads. (The 458/SW8 is not capable of controlling these load types. It is a mains switching unit only). Both modules have 8 high inrush relays, rated at 16A per channel. Each module has DALI, S-DIM and DMX interfaces for integration into DIGIDIM and Router systems

Key features• Module connects to any 458xx mechanical chassis• LCD display screen with navigation keys• DALI / S-DIM / DMX control inputs


458/CTR8 or SW8

458/DIM4 or DIM8

458/UNI8

458 control modules

458M1 Single Mechanical Chassis The DIGIDIM 458M1/ is a single mechanical chassis which can house any one DIGIDIM 458 control module, to provide 8 channels of control. The chassis is provided with an MCB per channel.

Key features• Vertical wall-mounted and installer-friendly• By-pass connectors for operation without a module• S-DIM cable loom for easy module connection included

458M2 Double Mechanical Chassis The DIGIDIM 458M2/ is a double mechanical chassis which can house any two DIGIDIM 458 control modules, to provide up to 16 channels of control. The chassis is provided with an MCB per channel.


458M3 Triple Mechanical Chassis The DIGIDIM 458M3/ is a triple mechanical chassis which can house any three DIGIDIM 458 control modules, to provide up to 24 channels of control. The chassis is provided with an MCB per channel.



458M3

458M1

458M2

458 mechanical chassis


406 503 402

405 407

402 DALI Power Supply• Fully DALI compatible Power Supply Unit• Provides a DIGIDIM system with the

required supply of up to 250 mA• Status LED• DALI short circuit and over temperature

protected• DIN-rail mounted

405 Dali Repeater• Extends the maximum DALI line length

from 300 m to 600 m• Provides 250 mA current at the DALI-

OUT side• DALI Messages are unfiltered• Strain-relief for standalone installation

(included)• Suitable for use with all DALI

applications, including Router/Toolbox systems

• Suitable for use as a DALI Power Supply

Accessories

407 Compact DALI Power SupplyAn ultra-compact DALI power supply that provides up to 64 mA current to a DIGIDIM system. It is designed for installations in which the DALI power supply must be contained in a limited space. It fits into UK, DIN and similar back boxes.

Key features• Ultra-compact footprint• 64 mA DALI supply• DALI short circuit protected• Over temperature protected• Flying leads for easy and flexible

connection

503 AV-interface• Permits the connection of a DIGIDIM

ststem to the RS232 port on a personal computer / AVsystem

• DIN-rail mounted• Status led• 4 kV isolation between DALI and the

RS232 port• Terminal blocks for wiring

406 Dali Repeater• A DIN-rail mounted version • Extends the maximum DALI line length

from 300 m to 600 m• Provides 250 mA current at the DALI-

OUT side• Messages are unfiltered• No isolation between DALI IN and DALI

OUT. Both are isolated from the mains input

441 and 444 Mini-Input Units • Allows customer specified switches, sensors, time clocks or

other on/off control devices to be incorporated into a Helvar lighting control system

• Manufactured in the form of a ribbon cable with encapsulated electronic module

• Suitable for installing behind a switch plate, in the back box• 441 has one volt free contact suitable for connection to sensors• 444 has 4 volt free contacts that may be momentary or latching• Comperehensive programming options via Designer and Toolbox

Software

445 Switch Interface Unit • Very compact interface for the conversion of 3rd party switches

or button panels• 4 LED driver outputs• Connections to the unit are via screw terminals• Compatible with a Helvar lighting control system• Operation is configured with Helvar Toolbox or Designer software• Powered from DALI network

942 Input Unit The Input Unit is an interface designed to allow customer specified switches, sensors, time clocks or other on/off control devices to be incorporated into a DIGIDIM or an Imagine lighting control system.

Key features• 8 volt-free switch inputs • Can be used with momentary or latching switches, 0–10 V

analogue devices and time clocks• Status LED for visual indication of the unit’s current operational

mode• Comprehensive programming options via Designer and Toolbox

Software


942

441 and 444

445

Input devices


510

434

Accessories

510 USB to DALI Interface USB to DALI interface connecting a PC, running Helvar Toolbox programming software, to a Helvar DIGIDIM DALI network. The 510 Interface unit is housed in a standard Helvarpanel module.

Key features• Simple insertion into DIGIDIM modular panels• Quick and simple PC-to-DALI connection• Black and white fascias included• Standard mini-B USB connector• Powered from DALI network

434 enocean® GatewayThe 434 enocean® Gateway lets you connect wireless and battery-less enocean® controls to a Helvar DALI lighting network. The 434 is for mounting on the ceiling or on walls, and requires only a single electrical connection to a DALI network.

Key features• Integrate wireless, battery-less switches into DALI network• Simple installation• Gateway is powered by the DALI network• Up to 20 switches can be integrated via one gateway


Ceiling PIR Detector (311)

Versions available:311 - IP20311P - IP55 rated311M - IP55 / -30°C

DALI sensors Comments/ Constant light reception area

Motion detection area

PIR -

Motion detector

Constant light

Functionality

DALI system sensors Compatible with DIGIDIM and 905/910/920 router systems

Multisensor (312) PIR •

High Bay Spot Detector (319)

PIR - -

5.5m

3m85˚

2.8m

7m

7.1m

5.2m0.8m

3.0m

100˚

Low Profile Microwave Detector (313)

Microwave - -

12-16m

2.8m

Tilting Microwave Detector (314)

Microwave -

22m 6m

2.8m 2.8m

30m 6m

High Bay PIR Presence/Absence Detector (317)

PIR - Versions available:317 - IP65 rated317M - IP65 / -30°C

40m

26m

16m

6m10m

15m

Wall-mounted PIR Presence/Absence Detector (318)

PIR - -

85˚

5m

6m

15m

2m 5.1m

20˚

20˚

DALI system sensors


320 341 322

DALI sensors Comments/ Constant light reception area

Motion detection areaMotion detector

Constant light

Functionality

DALI system sensors Compatible with DIGIDIM and 905/910/920 router systems

Presence detection coverage at 2.5m height

1 Helvar | Data is subject to change without notice. moc.ravleh.www

Multisensor (321)

The Multisensor is a compact sensor that combines a photocell for constant light control and a passive infrared (PIR) presence detector to provide energy-saving functions in a DALI system.

The light sensor measures reflected light from the surface directly below it. The unit uses this information to maintain a constant light level by adjusting the lamp outputs.

The PIR sensor enables the Multisensor to turn the lights on when its coverage area is occupied, and off when it is unoccupied.

The sensor’s settings are adjusted using Helvar’s Designer or Toolbox software.

Due to its superior detection performance, the Multisensor is especially suitable for applications where small or slow movements take place for extended periods of time, such as offices or classrooms. Since its detection sensitivity is less dependent on movement direction than that of most PIR sensors, less units are required to reliably cover a target area.

Presence Detection Coverage at 2.5 m Height Detection pattern at floor level for 2.5 m mounting height

Key Features• Superior detection performance through high sensitivity

and multidirectional coverage.• Programmable constant light control for energy

efficiency.• • Compact and stylish design.

8 m

6.2

m

116° 100°

Constant Light Coverage at 2.5 m Height

60°

PIR sensor

Light sensorStatus LED

yx

x

x y

x

y

8m6.2m

Constant light coverage at 2.5m height

2.9m

60˚

Ceiling PIR Presence / Absence Detector (321)

PIR •

DALI External Light Sensor (329)

- • When mounted vertically: 85° from vertical; Horizontal plane: 360°

PIR sensor (320) PIR -

High Bay multisensor (322)

PIR Bright-out

Corridor PIR sensor (341)

PIR -

15m

40m

-

-

2m

Presence detection coverage at 2.5m height

1 Helvar | Data is subject to change without notice. moc.ravleh.www

Multisensor (321)

The Multisensor is a compact sensor that combines a photocell for constant light control and a passive infrared (PIR) presence detector to provide energy-saving functions in a DALI system.

The light sensor measures reflected light from the surface directly below it. The unit uses this information to maintain a constant light level by adjusting the lamp outputs.

The PIR sensor enables the Multisensor to turn the lights on when its coverage area is occupied, and off when it is unoccupied.

The sensor’s settings are adjusted using Helvar’s Designer or Toolbox software.

Due to its superior detection performance, the Multisensor is especially suitable for applications where small or slow movements take place for extended periods of time, such as offices or classrooms. Since its detection sensitivity is less dependent on movement direction than that of most PIR sensors, less units are required to reliably cover a target area.

Presence Detection Coverage at 2.5 m Height Detection pattern at floor level for 2.5 m mounting height

Key Features• Superior detection performance through high sensitivity

and multidirectional coverage.• Programmable constant light control for energy

efficiency.• • Compact and stylish design.

8 m

6.2

m

116° 100°

Constant Light Coverage at 2.5 m Height

60°

PIR sensor

Light sensorStatus LED

yx

x

x y

x

y

8m6.2m

21m

341 Corridor PIR sensor Designed specially for corridors, with wide coverage and a long detection range.

320 PIR sensorAn easy-to-install PIR sensor with enhanced sensitivity and reliability in standard room heights.

322 High Bay multisensorFor automatic control of lighting loads where mounting heights are too high for standard sensors.

Three sensors new to this catalogue


How Imagine fits together

Ethernet switch

920 Router

SceneSet mobile app

SDIM

DMX

16xx Panel 454 Transistor Dimmer

LED Driver 313 Sensor

405 DALI Repeater 317 Sensor

910 Router

From energy-efficient offices to world-famous architectural sites, our router system’s made for scale and flex.

The Helvar 905, 910 and 920 allow a modular approach to system design. Built on industry standard communications, implementation stays as easy as can be.

Each individual router can provide a maximum of two powered DALI subnets supporting up to 128 DALI devices.

And you can network multiple routers using Ethernet switches to accommodate your grandest designs.

Maximum freedom in lighting design• From one room to multiple sites• Live energy monitoring• A range of user interface options• Lighting transitions and scenes• Automated control• Colour temperature control• Integrates with building automation

systems

Imagine


How Imagine fits together

DALI Ballast

499 Relay Unit 478 DALI Controller

434 Enocean® Gateway 18XX Enocean® Panel

905 Router

321 Sensor

BMS Integration

435 BACnet Gateway

317 Sensor

474 Ballast Controller

All Imagine routers give you• Supports for up to 128 DALI devices• Integrated 250mA power supply for each DALI subnet• 10/100 Mbit/s Ethernet connection• Third-party TCP/IP integration through HelvarNet • Supports compliant DALI Emergency devices

And when you choose the 920• Support for up to 252 S-DIM channels• Supports up to 512 DMX addresses ‘in’ or ‘out’


Professional-level software for lighting engineers.The smartest way to commission, design and program Helvar systems.

Designer™

Helvar routers are the building blocks for the world’s most powerful lighting control.

Designer™ helps you harness their magic.

They’ll always work straight from the box. But if you want to reveal their true force, call on the latest DALI Type 8 protocol.

Presence detection, constant light monitoring and building management system (BMS) integration are just the basics. Every Helvar router can operate one or two DALI subnets containing 128 control devices and load interfaces in total.

It’s a gateway to vast possibilities.

Using Ethernet I/O commands, you’ll have the flexibility and scalability to tackle record-breaking applications. With energy efficiency and human wellbeing at their heart.

From a small standard office to the world’s biggest cruise ship, it’s the last word in lighting intelligence.

905 routerThe 905 Router uses standard Ethernet communication (TCP/IP) to combine multiple DALI networks. The router features one DALI subnet allowing for a total of 64 DALI control devices and load interfaces.

Key features• One DALI subnet, with 250 mA power supply• Ethernet port for network backbone• Supports Ethernet I/O communication• Supports DALI Emergency devices

910 routerThe 910 Router uses standard Ethernet communication (TCP/IP) to combine multiple DALI networks. The router features two DALI subnets allowing for a total of 128 DALI control devices and load interfaces.

Key features• Two DALI subnets, each with 250 mA power supply• Ethernet port for network backbone• Supports Ethernet I/O communication• Supports DALI Emergency devices

920 routerThe 920 Router uses an Ethernet connection (TCP/IP) as a network backbone to combine DALI, DMX and S-DIM networks seamlessly together. A PC can be connected to the system for control, monitoring and logging purposes.

Key features• Two DALI subnets, each with 250 mA power supply• S-DIM port for Helvar Imagine systems• DMX-port (in or out)• Override port for S-DIM• Supports Ethernet I/O communication• Supports DALI Emergency devices

Routers


920

905

910

Download our free iPhone or Android app. Take fingertip control of router systems through Wi-Fi.

Call up and modify lighting scenes. Update multiple lighting groups in one go. Even manage RGB colour and tunable white luminaires — from this simple, customisable interface.

SceneSet for iOS and Android.

SceneSet


SceneSet for Android on a tablet.

Tridium

Tridium Helvar IP DriverOur Niagara driver integrates all your DALI, SDIM and enocean® devices. And it only needs one Ethernet port.

Top features• Integrates DALI, SDIM & enocean®• Only one Ethernet port required• Automatic Discovery – devices/points• Widgets – easy creation of PX graphic

for luminaires, button panels, PIR sensor and Emergency DALI Ballasts

• Component Creator – runtime

435

435 BACnet GatewayOur 435 BACnet Gateway is a simple interface to a Helvar router system. It lets lighting system data appear in a BACnet Building energy Management System.

Top features• Operates as a BACnet server• Helvar workgroup discovery tool• Helvar router selector• Automatic Helvar point identification• BACnet/IP compatible• Automatic BACnet instance labelling • COV (change of value) BACnet feature • Browser programming interface

uSee & Integration


Let the people who see the lights control the lights.With this PC or tablet-based app.

uSee gives non-experts real power. It lets anyone adjust lighting scenes and create energy use reports through a simple, intuitive interface.There’s no Designer programming involved. The app scans your lighting system’s Designer settings and translates them into English at a tap.

We’re always improving our products. See what’s new at helvar.com

FINLAND HELVAR OY AB, Keilaranta 5FI-02150 EspooTel. +358 9 5654 1

SWEDENHelvar ABÅsögatan 155SE-11632 StockholmTel. +46 8 545 239 70

UNITED KINGDOMHelvar LtdHawley Mill, Hawley Road Dartford, Kent, DA2 7SYTel. +44 1322 617 200

We’re based in Finland, Sweden and the UK. And work with partners all over the world.

Front cover image: Ørestad Skole, Copenhagen

Vers

ion

Engl

ish

01.2

019

lighting intelligence catalogue · • the ultimate brighter space design ... 13xx modules / 25xx...

Documents