line marking removal equipment | quill falcon australia | adelaide abrasive blasting equipment

8
Quill Falcon Australia Line Marking Removal Equipment

Upload: cadogan-and-hall-adelaide-copywriting-and-editorial-design

Post on 04-Apr-2016

212 views

Category:

Documents


0 download

DESCRIPTION

Abrasive blasting using Quill Falcon Kwikblast® System abrasive blasting equipment removes all types of road and pavement markings, both from the surface and from any cavities or depressions. Quill Falcon Kwikblast® System sandblasting equipment is ideal for removing road and pavement markings, rubber deposits and other types of surfacing from almost any type of road or pathway surface. www.quillfalconaustralia.com.au

TRANSCRIPT

Page 1: Line Marking Removal Equipment | Quill Falcon Australia | Adelaide Abrasive Blasting Equipment

Quill Falcon AustraliaLine Marking Removal Equipment

Page 3: Line Marking Removal Equipment | Quill Falcon Australia | Adelaide Abrasive Blasting Equipment

The Quill Falcon Kwikblast® Precision Dustless Blasting System is the most

technologically advanced wet abrasive blasting system available in Australia

today.

The Quill Falcon Kwikblast® System is ideal for removing old or degenerated road and pavement markings, rubber deposits and other types of discolouration from almost

any type of road or pathway surface.

www.quillfalconaustralia.com.au

Page 4: Line Marking Removal Equipment | Quill Falcon Australia | Adelaide Abrasive Blasting Equipment

Combining the simplicity of conventional sandblasting with the efficiency of ultra high pressure (UHP) jetting, wet abrasive blasting using the Quill Falcon Kwikblast® System effectively

removes line markings and rubber deposits from roads, car parks and driveways but without scorching or scarring the surface.

The Quill Falcon Kwikblast® System quickly and effectively removes all types of markings from road and pavement surfaces, including:

www.quillfalconaustralia.com.au

permanent and temporary thermoplastic painttemporary road marking tape

surface dressing emulsionresin-based paintsanti-skid surfacing

Page 5: Line Marking Removal Equipment | Quill Falcon Australia | Adelaide Abrasive Blasting Equipment

www.quillfalconaustralia.com.au

Abrasive blasting using the Quill Falcon Kwikblast® System removes all types of road and pavement markings, both from the surface and from any cavities or depressions.

Wet abrasive blasting is so effective as abrasive material is propelled by water at high pressure onto the surface of the road or footpath, and this strips away old paint and markings, rubber deposits and other unwanted substances. The surface, however, is left undamaged and contaminant free.

Wet abrasive blasting also cleans mould, grease, oil and other slippery deposits from roads, paths, walkways, car parks and driveways. Concrete aggregate can be exposed by abrasive blasting to create non-slip surfaces, perfect for use in public spaces such as shopping centres, schools, industrial parks, and commercial premises. Non-slip surfaces can be created by abrasive blasting in a variety of materials and surfaces, including concrete, tiles and pavers.

Page 6: Line Marking Removal Equipment | Quill Falcon Australia | Adelaide Abrasive Blasting Equipment

www.quillfalconaustralia.com.au

Surfaces are not gouged or dished when markings are removed using wet abrasive blasting.

Aggregate is not blasted away, and so this means that surfaces do not need resurfacing or additional maintenance when markings have been removed.

Rubber deposits are also effectively removed from

road surfaces, pavements and driveways using wet abrasive blasting.

Wet abrasive blasting is safe, environmentally-friendly and cost effective. The Quill Falcon Kwikblast® System does not cause environmental damage nor consume excessive natural resources, as little water is used and there is almost no dust or waste produced.

Page 7: Line Marking Removal Equipment | Quill Falcon Australia | Adelaide Abrasive Blasting Equipment

www.quillfalconaustralia.com.au

Applications for wet abrasive blastingroad markings

airport runwayscar parks

pavements and footpathswalkways

Surfaces suitable for wet abrasive blastingbitumen and asphaltconcrete and brickmetal and steeltimberPVC

Page 8: Line Marking Removal Equipment | Quill Falcon Australia | Adelaide Abrasive Blasting Equipment

Quill Falcon Australia was founded in 2009 and is the sole importer and

distributor of the Quill Falcon Precision Dustless Kwikblast® System

Quill Falcon Australia and its parent company Quill International offer worldwide service and

support that is second to none.

We operate to high environmental standards and Quill Falcon blasting systems can be used

virtually anywhere and at any time.

Our systems are safe and require little if any encapsulation, which means that other work

can be carried out simultaneously, saving you both time and money.

[email protected]