linia deco

21

Upload: james3783

Post on 18-Nov-2014

135 views

Category:

Documents


0 download

DESCRIPTION

LINIA Deco from RIDI Lighting Ltd. Pre-wired decorative continuous lighting system for T5 lamps.

TRANSCRIPT

Page 1: LINIA Deco
Page 2: LINIA Deco

110

The RIDI LINIA DECO luminaire family

VLDGT/VLDGTA – Continuous lighting system LINIA DECOThe continuous lighting system is connected from one gear tray to the next by an 8-core connector. The 8-corethrough wiring with its 1.5 mm² cross-section permits the following switching arrangements: Standard mains L1-L2-L3-N-WStandard mains L1-L2-L3-N-W + control cable DA-DAStandard mains L1-L2-L3-N-W + substitute power supply EL-ENStandard mains L1-L2-N-W + substitute power supply EL-EN + control cable DA-DAAt the start and end of a one or two-length luminaire unit, 8-core plug-and-socket connectors are prefitted in theluminaire end elements for simple, convenient electrical connection to the following luminaire. Electrical and me-chanical connection take place in a single process without the use of tools.

VLDF – Batten system LINIA DECOA highly minimized batten cross-section featuring aconnector block without integrated through wiring, pri-marily designed for single mounting and for directmounting of fixing surfaces, but also suitable for pen-dant mounting.

Page 3: LINIA Deco

111

VLD. 1..

Combined with a modular range of opticalcontrols engineered to the same high designstandard, this is a product capable offulfilling even the most demandingphotometric specification.The series is also prefitted as standard withmultiple-core wiring for light controlalongside Digital Addressable LightingInterface (DALI) control devices. The patented design of the trunking andgear tray profile reduces the number ofcomponents and makes a major contributiontowards minimizing installation times.

RIDI LINIA DECO is available in a singleluminaire version and as a continuouslighting system. The same optical controland accessory components can be used onboth versions.

The RIDI LINIA DECO continuous and battenlighting system series from RIDI is totallynew in terms of both technical configurationand styling.The designer based his concept on thecustomary industrial continuous lightingsystem standard, creating a product whichis ideally suited for sophisticated surfaceillumination in sales showrooms, exhibitionsand office rooms and which provides agraceful lighting focus in interior designs ofparticular architectural merit.

The patented gear tray system without gear tray insert permits the integration of electrical control gear directly intothe trunking without the need for an additional tray insert. This cuts down on the number of components required,number of mounting steps and also packaging, and makes DECO quicker and easier to install, as well as savingcosts.

The highly minimized luminaire cross-sectionEchoing the slender styling of the T16 lamp, the lumi-naire system RIDI LINIA DECO has been designed with ahighly compact, minimized luminaire cross-section. Theoptical control products, which can be used for the oneand two-lamp length version, have also been designedto suit the proportions of the T16.

Page 4: LINIA Deco

112

3636

50

76 76

The luminaire colours:The luminaires are supplied as standard inwhite and silver grey.To allow the product to blend completelyinto any room design, interior designers maychoose from a range of additional colours.

The luminaire system:This luminaire system encompasses twobasic models:§ The VLDF batten series for predominantly

single installation§ The VLDGT continuous lighting system for

continuous rows of luminaires.The same optical control, fixings andaccessories are used for both models.However, the gear trays are distinguished bythe following features:

Luminaire styling:This luminaire family has been designedfully around the proportions of the new T16(T5) lamp. Minimized product componentssuch as gear trays and optical controls lendthe luminaire light and graceful appearance.The designer has skilfully succeeded inintegrating all technical elements whichwould detract from the clarity of the stylinginto the product components themselves. Itsclassical and uncluttered appearance makethis a product which will blend perfectly intoalmost any room design.

Gear trayThe gear tray profiles are available in one or two lamp lengths and are made of galvanized white / silver syntheticresin coated steel. Batten series VLDF is only available in a one-lamp length version, gear tray VLDGT a one ortwo-lamp length version. Inset functional end caps in the same colour as the luminaire carry the lampholder and,in the case of the VLDGT model series, also the plug and socket connectors of the 8-core through wiring. All thelamp control gear is integrated in the gear tray. The fixing clamps of the various fixing kits clip into the profilegroove running along the top of the gear tray.

Through wiringThe gear trays of model series VLDGT come withprefitted eight-core through wiring 1.5 mm² terminatingin a plug and socket connection at each end of the geartray. Core selection is possible by simply replugging thecable at the easily accessible connector block.

Page 5: LINIA Deco

113

Luminaire body VLDF:This product is an exceptionally narrowlighting batten with connector block butwithout prefitted through wiring. It ispredominantly suited for single installationand for direct mounting on the fixing surfaceas well as for pendant mounting. However, itis possible to create continuous lightingsystems with this product by positioning in arow.

Luminaire body VLDGT:As a luminaire body with one or two lamplengths and pre-fitted 8-core through wiring,this product is a classical continuous lightingsystem for pendant mounting from the roomceiling or direct mounting on room surfaces.A special electrical plug system at the endsof the gear trays permits simple, time-saving inter-connection of luminaire bodies.A varied range of fixing accessories opensup scope for flexible installation of theproduct.

Decorative end caps:Decorative plastic end caps coloured white /stone grey can be used on gear trays VLDF /VLDGT and reflectors VLDR, forming adecorative finish to the ends of singleluminaires / continuous lighting systems.

Mains connection In the VLDF series, a connector block 3 x 2 x 2.5 mm² is provided for mains connection. Cable entries are locatedat the top of the gear tray. The continuous lighting system is connected to the mains through the connector geartray VLTGTA, which features terminals allowing connection for a maximum 2 x 2.5 mm² per core.

Fixing accessoriesThe top of the gear tray is prepared to accommodatethe various fixing kits. A sturdy spring clip provided inthe fixing kits can be clipped simply into the top of thegear tray without the need for tools and variablypositioned in the lengthways direction.

Gear tray coverIf the luminaires are operated exposed withoutreflectors, a gear tray cover VLDGA… must be used tocover the electrical gear. When using reflectors, thegear tray cover is not required.

Decorative end capsThe functional end caps must be closed at the start andend of the mounted single luminaires or continuousrows of luminaires using a decorative end cap.

Page 6: LINIA Deco

114

System overview RIDI LINIA DECO

Components required for a continuous lighting system with n units 80 W.For the necessary optical control components, see under “Optical control and Accessories”.

2,946 2 1 -- -- 2 24,419 3 1 1 -- 2 35,892 4 1 -- 1 2 37,365 5 1 1 1 2 48,838 6 1 -- 2 2 4

10,311 7 1 1 2 2 511,784 8 1 -- 3 2 513,257 9 1 1 3 2 614,730 10 1 -- 4 2 616,203 11 1 1 4 2 717,676 12 1 -- 5 2 719,149 13 1 1 5 2 820,622 14 1 -- 6 2 822,095 15 1 1 6 2 923,568 16 1 -- 7 2 9

25,041 17 1 1 7 2 1026,514 18 1 -- 8 2 1027,987 19 1 1 8 2 1129,460 20 1 -- 9 2 1130,933 21 1 1 9 2 1232,406 22 1 -- 10 2 1233,879 23 1 1 10 2 1335,352 24 1 -- 11 2 1336,825 25 1 1 11 2 1438,298 26 1 -- 12 2 1439,771 27 1 1 12 2 1541,244 28 1 -- 13 2 1542,717 29 1 1 13 2 1644,190 30 1 -- 14 2 16

Lengthappr. [m]

UnitsVLDGTA 2

Cont. LuminaireCont. LuminaireVLDGT 1

Cont. LuminaireVLDGT 2

End cap Suspensionsmin. Number

Lengthappr. [m]

UnitsVLDGTA 2

Cont. LuminaireCont. LuminaireVLDGT 1

Cont. LuminaireVLDGT 2

End cap Suspensionsmin. Number

RIDI continuous lighting system ExpertThe continuous lighting system Expert canbe used for simple, convenient constellationof continuous lighting systems and theircomponents. The required PC software canbe downloaded from the Ridi websitewww.ridi.de.Intuitive menu prompting guides the user tothe necessary inputs. As a result, a bill ofmaterials containing all the necessary com-ponents is produced with calculation of thegross prices.

VLDSRGVLDSRM

VLDWR

VLDRL

VLDRVLDRA

VLDRIB

VLDRIT

VLDRIS

VLDD 1..

Fixing accessories…

Battens/Gear trayBattens/Gear tray

Optical control/reflector

VLDHD VLDHS VLDHSD VLDHST VLDHP VLDHWVLDHT VLDHK

VLDF-2.. VLDGT-2..VLDGTA-2..

VLDGT-1..VLDGTA-1..

VLDF-1..

Optical control/reflectors for mounting on battens or gear trays

Louvres for insertion in optical controls / reflectorsLay-in louvre

Page 7: LINIA Deco

115

Contents RIDI LINIA DECO

…for constructions

+ Accessories

VLDGT-VS.

VLDE 2

VLDGA

VLDE 1

Optical control und accessories 123-129

Connection and fixing accessories 122

Gear tray 118-121VLDGT, VLDGTA

Batten 116-117VLDF

Page 8: LINIA Deco

116

VLDF 1..

VLDF 1..

VLDF 1..-EVG

IP20T16

VLDF 1..-SI-EVG

VLDF 154h [%] 99.6Phi_u [%] 74.0Phi_o [%] 26.0LITG_DIN B 31UTE 0.74H 0.26T

1)

Batten VLDF ...-EVG, VLDF ...-SI-EVG for T16 lamps

Batten: Rigid, profiled steel gear tray. Both sides coated in white or silver synthetic resin. Inset plastic functionalend caps which carry the lampholder. At the top of the gear tray there is a groove for external through wiring. Thereis an additional cable entry at the top of the gear tray.The batten is supplied complete with cover and plastic end caps. White finish with gear tray cover and end caps inwhite. Silver finish (SI) with gear tray cover and end caps in dust grey RAL 7037.Can be combined with reflectors, see accessories.

Luminaire mounting: suitable for direct mounting on normal inflammable materials. Simple, low-cost one-man in-stallation through key holes in the top of the gear tray. For pendant mounting, the fixing kits shown under Accessories can be used.

Note: Luminaires with MM symbol are suitable for furniture mounting. Models without an index are not suitable.

230V/50Hz

IP 20

1) MM symbol: No lateral spacing required between luminaire housing and adjacent surface.

1) MM symbol: No lateral spacing required between luminaire housing and adjacent surface.

Model LampsDimens. [mm]L1 L2 A1

Weight[kg]

electronic ballastProd. code

dimm. ballast (DALI)Prod. code

VLDF 114/24 1xT16 14/24 W 573 602 443 1,4 0522011 0532011

VLDF 121/39 1xT16 21/39 W 873 902 573 1,2 0522012 0532012

VLDF 1281) 1xT16 28 W 1173 1202 773 1,4 0522008

VLDF 128/54 1xT16 28/54 W 1173 1202 773 1,6 0522088 0532088

VLDF 1351) 1xT16 35 W 1473 1502 973 1,6 0522009

VLDF 135/49/80 1xT16 35/49/80 W 1473 1502 973 1,6 0522087 0532087

VLDF 149 1xT16 49 W 1473 1502 973 1,7 0522010

VLDF 154 1xT16 54 W 1173 1202 773 1,2 0522013

VLDF 180 1xT16 80 W 1473 1502 973 1,6 0522014

Model LampsDimens. [mm]L1 L2 A1

Weight[kg]

electronic ballastProd. code

dimm. ballast (DALI)Prod. code

VLDF 114/24 SI 1xT16 14/24 W 573 602 443 1,0 0522011SI 0532011SI

VLDF 121/39 SI 1xT16 21/39 W 873 902 573 1,2 0522012SI 0532012SI

VLDF 128/54 SI 1xT16 28/54 W 1173 1202 773 1,6 0522088SI 0532088SI

VLDF 128 SI1) 1xT16 28 W 1173 1202 773 1,4 0522008SI

VLDF 135/49/80 SI 1xT16 35/49/80 W 1473 1502 973 1,6 0522087SI 0532087SI

VLDF 135 SI1) 1xT16 35 W 1473 1502 973 1,6 0522009SI

VLDF 149 SI 1xT16 49 W 1473 1502 973 1,7 0522010SI

VLDF 154 SI 1xT16 54 W 1173 1202 773 1,4 0522013SI

VLDF 180 SI 1xT16 80 W 1473 1502 973 1,6 0522014SI

Voltage:

Protection class:

Approvals:

Page 9: LINIA Deco

117

VLDF 2..

VLDF 2..

VLDF 2..-EVG

VLDF 2..-SI-EVG

VLDF 254h [%] 95.8Phi_u [%] 72.0Phi_o [%] 28.0LITG_DIN B 31UTE 0.69G 0.27T

Batten VLDF ...-EVG, VLDF ...-SI-EVG for T16 lamps

1) MM symbol: No lateral spacing required between luminaire housing and adjacent surface.

1) MM symbol: No lateral spacing required between luminaire housing and adjacent surface.

Model LampsDimens. [mm]L1 L2 A1

Weight[kg]

electronic ballastProd. code

dimm. ballast (DALI)Prod. code

VLDF 2281) 2xT16 28 W 1173 1202 773 1,6 0522035

VLDF 228/54 2xT16 28/54 W 1173 1202 773 1,7 0522090 0532090

VLDF 2351) 2xT16 35 W 1473 1502 973 1,7 0522086

VLDF 235/49 2xT16 35/49 W 1473 1502 973 2,1 0522036 0532036

VLDF 249 2xT16 49 W 1473 1502 973 1,4 0522018

VLDF 254 2xT16 54 W 1173 1202 773 1,4 0522017

Model LampsDimens. [mm]L1 L2 A1

Weight[kg]

electronic ballastProd. code

dimm. ballast (DALI)Prod. code

VLDF 228/54 SI 2xT16 28/54 W 1173 1202 773 1,8 0522090SI 0532090SI

VLDF 228 SI1) 2xT16 28 W 1173 1202 773 1,3 0522035SI

VLDF 235/49 SI 2xT16 35/49 W 1473 1502 973 2,0 0522036SI 0532036SI

VLDF 235 SI1) 2xT16 35 W 1473 1502 973 1,7 0522086SI

VLDF 249 SI 2xT16 49 W 1473 1502 973 1,4 0522018SI

VLDF 254 SI 2xT16 54 W 1173 1202 773 1,4 0522017SI

Page 10: LINIA Deco

118

VLDGT 1-1..

VLDGT 1-2..

VLDGT 1-1..-EVGVLDGT 1-1..-SI-EVG

VLDGT 1-2..-EVGVLDGT 1-2..-SI-EVG

VLDGT 1-128/54h [%] 99.6Phi_u [%] 74.0Phi_o [%] 26.0LITG_DIN B 31UTE 0.74H 0.26T

VLDGT 1-228/54h [%] 95.8Phi_u [%] 72.0Phi_o [%] 28.0LITG_DIN B 31UTE 0.69G 0.27T

IP20T16

Gear tray VLDGT ... for T16 lamps

Gear tray, 1-length, 1-lamp with 1x socket, 1x plug and 1x mechanical connector.

Gear tray, 1-length, 2-lamp with 1x socket, 1x plug and 1x mechanical connector.

Continuous lighting system: With an extremely narrow cross section for exposed operation or combination withoptical controls (reflectors).

Gear tray, 1 and 2 length:Rigid, profiled steel gear tray. Coated in white or silver (SI) synthetic resin. Inset plastic functional end caps whichcarry the lampholders and socket connectors for the through wiring. 8-core 1.5 mm² through wiring is already pr-efitted in the gear tray. Prefitted multiwatt EVG.

Gear tray cover: If the luminaires are to be used without reflectors, the gear tray cover VLDGA must be used tocover the electrical components.

Gear tray end cover: When the individual luminaires or rows of luminaries are mounted, the functional end capsat the start and end must each be closed by a gear tray end cover VLDE.

Mains connection: Mains connection for continuous lighting systems takes place via a connecting gear trayVLDGTA, which can be positioned at the start or end of a continuous lighting system, but also between two lumi-naires. Prefitted terminals 8x2x2.5 mm² and plug-and-socket connections for connection to additional VLDGT ...gear trays.

Luminaire mounting: Suitable for direct mounting on normal inflammable materials. Simple, low-cost one-maninstallation of the gear tray with screws through holes in the top of the gear tray. For pendant mounting, the fixing kits shown under Accessories can be used.

Special model:• Empty tracks in required length on request • Emergency lighting versions on request

230V/50Hz

IP 20

Model LampsDimens. [mm]L1 A1 A2 A3

Weight[kg]

electronic ballastProd. code

dimm. ballast (DALI)Prod. code

VLDGT 1-128/54 1xT16 28/54 W 1173 773 220 400 1,5 0522019 0532019

VLDGT 1-128/54 SI 1xT16 28/54 W 1173 773 220 400 1,5 0522019SI 0532019SI

VLDGT 1-135/49/80 1xT16 35/49/80 W 1473 973 270 500 1,7 0522020 0532020

VLDGT 1-135/49/80 SI 1xT16 35/49/80 W 1473 973 270 500 1,7 0522020SI 0532020SI

Model LampsDimens. [mm]L1 A1 A2 A3

Weight[kg]

electronic ballastProd. code

dimm. ballast (DALI)Prod. code

VLDGT 1-228/54 2xT16 28/54 W 1173 773 220 400 1,6 0522023 0532023

VLDGT 1-228/54 SI 2xT16 28/54 W 1173 773 220 400 1,6 0522023SI 0532023SI

VLDGT 1-235/49 2xT16 35/49 W 1473 973 270 500 1,8 0522024 0532024

VLDGT 1-235/49 SI 2xT16 35/49 W 1473 973 270 500 1,8 0522024SI 0532024SI

Voltage:

Protection class:

Approvals:

Page 11: LINIA Deco

119

VLDGT 2-1..

VLDGT 2-2..

VLDGT 2-1..-EVGVLDGT 2-1..-SI-EVG

VLDGT 2-2..-EVGVLDGT 2-2..-SI-EVG

VLDGT2-228/54h [%] 95.8Phi_u [%] 72.0Phi_o [%] 28.0LITG_DIN B 31UTE 0.69G 0.27T

VLDGT2-128/54h [%] 99.6Phi_u [%] 74.0Phi_o [%] 26.0LITG_DIN B 31UTE 0.74H 0.26T

Gear tray VLDGT ... for T16 lamps

Gear tray, 2-length, 1-lamp with 1x socket, 1x plug and 1x mechanical connector.

Gear tray, 2-length, 2-lamp with 1x socket, 1x plug and 1x mechanical connector.

Model LampsDimens. [mm]L1 A1 A2 A3

Weight[kg]

electronic ballastProd. code

dimm. ballast (DALI)Prod. code

VLDGT 2-128/54 2xT16 28/54 W 2346 773 220 400 2,7 0522027 0532027

VLDGT 2-128/54 SI 2xT16 28/54 W 2346 773 220 400 2,7 0522027SI 0532027SI

VLDGT 2-135/49/80 2xT16 35/49/80 W 2946 973 270 500 3,4 0522028 0532028

VLDGT 2-135/49/80 SI 2xT16 35/49/80 W 2946 973 270 500 3,4 0522028SI 0532028SI

Model LampsDimens. [mm]L1 A1 A2 A3

Weight[kg]

electronic ballastProd. code

dimm. ballast (DALI)Prod. code

VLDGT 2-228/54 4xT16 28/54 W 2346 773 220 400 3,0 0522031 0532031

VLDGT 2-228/54 SI 4xT16 28/54 W 2346 773 220 400 3,0 0522031SI 0532031SI

VLDGT 2-235/49 4xT16 35/49 W 2946 973 270 500 6,8 0522032 0532032

VLDGT 2-235/49 SI 4xT16 35/49 W 2946 973 270 500 3,4 0522032SI 0532032SI

Page 12: LINIA Deco

VLDGTA 1-1..

VLDGTA 1-2..

120

VLDGTA 1-1..-EVGVLDGTA 1-1..-SI-EVG

VLDGTA 1-2..-EVGVLDGTA 1-2..-SI-EVG

IP20T16

VLDGTA 1-128/54h [%] 99.6Phi_u [%] 74.0Phi_o [%] 26.0LITG_DIN B 31UTE 0.74H 0.26T

VLDGTA 1-228/54h [%] 95.8Phi_u [%] 72.0Phi_o [%] 28.0LITG_DIN B 31UTE 0.69G 0.27T

Gear tray VLDGTA ... for T16 lamps, for mains connection

Add-on gear tray, 1-length, 1-lamp with 2x sockets, without mechanical connector

Add-on gear tray, 1-length, 2-lamp with 2x sockets, without mechanical connector

Continuous lighting system: With an extremely narrow cross section for exposed operation or combination withoptical controls (reflectors).

Gear tray, 1 and 2 length: Rigid, profiled steel gear tray. Coated in white or silver synthetic resin. Inset plasticfunctional end caps which carry the lampholders and socket connectors for the through wiring. 8-core1.5 mm²through wiring is already prefitted in the gear tray. Prefitted Multiwatt EVG.

Gear tray cover: If the luminaires are to be used without reflectors, the gear tray cover VLDGA must be used tocover the electrical elements.

Gear tray end cover: When the individual luminaires or rows of luminaries are mounted, the functional end capsat the start and end must each be closed by a gear tray end cover VLDE.

Mains connection: Mains connection for continuous lighting systems takes place connecting gear tray VLDGTA,which can be positioned at the start or end of a continuous lighting system, but also between two luminaires. Pre-fitted terminals 8x2x2.5 mm² and plug-and-socket connections for connection to additional VLDGT ... gear trays.

Luminaire mounting: Suitable for direct mounting on normal inflammable materials. Simple, low-cost one-maninstallation of the gear tray with screws through holes in the top of the gear tray. For pendant mounting, the fixing kits shown under Accessories can be used.

Special model:• Empty tracks in required length on request • Emergency lighting versions on request

230V/50Hz

IP 20

Model LampsDimens. [mm]L1 A1 A2 A3 A4

Weight[kg]

electronic ballastProd. code

dimm. ballast (DALI)Prod. code

VLDGTA 1-135/49/80 1xT16 35/49/80 W 1473 973 270 500 400 1,7 0528002 0538002

VLDGTA 1-135/49/80 SI 1xT16 35/49/80 W 1473 973 270 500 400 1,7 0528002SI 0538002SI

Model LampsDimens. [mm]L1 A1 A2 A3 A4

Weight[kg]

electronic ballastProd. code

dimm. ballast (DALI)Prod. code

VLDGTA 1-235/49 2xT16 35/49 W 1473 973 270 500 400 1,8 0528004 0538004

VLDGTA 1-235/49 SI 2xT16 35/49 W 1473 973 270 500 400 1,8 0528004SI 0538004SI

Voltage:

Protection class:

Approvals:

Page 13: LINIA Deco

121

VLDGTA 2-1..

VLDGTA 2-2..

VLDGTA 2-1..-EVGVLDGTA 2-1..-SI-EVG

VLDGTA 2-2..-EVGVLDGTA 2-2..-SI-EVG

VLDGTA 2-128/54h [%] 99.6Phi_u [%] 74.0Phi_o [%] 26.0LITG_DIN B 31UTE 0.74H 0.26T

VLDGTA 2-228/54h [%] 95.8Phi_u [%] 72.0Phi_o [%] 28.0LITG_DIN B 31UTE 0.69G 0.27T

Gear tray VLDGTA ... for T16 lamps, for mains connection

Add-on gear tray, 2-length, 1-lamp with 2x sockets, without mechanical connector

Add-on gear tray, 2-length, 2-lamp with 2x sockets, without mechanical connector

Model LampsDimens.[mm] A1 A2 A3 A4

Weight[kg]

electronic ballastProd. code

dimm. ballast (DALI)Prod. code

VLDGTA 2-128/54 2xT16 28/54 W 2346 773 220 400 350 2,6 0528005 0538005

VLDGTA 2-128/54 SI 2xT16 28/54 W 2346 773 220 400 350 2,6 0528005SI 0538005SI

VLDGTA 2-135/49/80 2xT16 35/49/80 W 2946 973 270 500 400 3,5 0528006 0538006

VLDGTA 2-135/49/80 SI 2xT16 35/49/80 W 2946 973 270 500 400 3,5 0528006SI 0538006SI

Model LampsDimens. [mm]L1 A1 A2 A3 A4

Weight[kg]

electronic ballastProd. code

dimm. ballast (DALI)Prod. code

VLDGTA 2-228/54 4xT16 28/54 W 2346 773 220 400 350 3,2 0528007 0538007

VLDGTA 2-228/54 SI 4xT16 28/54 W 2346 773 220 400 350 3,2 0528007SI 0538007SI

VLDGTA 2-235/49 4xT16 35/49 W 2946 973 270 500 400 3,6 0528008 0538008

VLDGTA 2-235/49 SI 4xT16 35/49 W 2946 973 270 500 400 3,6 0528008SI 0538008SI

Page 14: LINIA Deco

122

Connection and fixing accessories

Chain fixing VLDHKfor VLF/VLDF/VLDGT. Sturdy spring clip in spring steelwith steel chain swing hook, galvanized. Clip can be adjusted lengthwise for variable fixing distances. Admissible load 15 kg, 1 pc.

VLDHK 0202596

T-bar fixing VLDHTfor VLF/VLDF/VLDG. Sturdy spring clip in spring steelwith CADDY-T T-bar clip for system ceilings with T profile 24- 26 mm. Admissible load 15 kg. Clip can beadjusted lengthwise for variable fixing distances.

VLDHT 0202595

Gear tray end cap VLDEEnd cap in plastic for VLDGT 1-lamp or 2-lamp, withcatches for simple clipping into functional face ends.

VLDE 1 Colour whiteVLDE 1-STG Colour dusty greyVLDE 2 Colour whiteVLDE 2-STG Colour dusty grey

02025850202585AD

02025860202586AD

X-shaped joining pieceJoining piece for VLDGT to create constructions withthrough wiring. 3x sockets, 1x plug, 1x mechanical connector

VLDGT-VSK Colour whiteVLDGT-VSK-SI Colour silver

02080640208064SI

L-shaped joining pieceJoining piece VLDGT to create constructions withthrough wiring. 1x socket, 1x plug, 1x mechanical connector.

VLDGT-VSL Colour whiteVLDGT-VSL-SI Colour silver

02080650208065SI

T-shaped joining pieceJoining piece VLDGT to create constructions withthrough wiring. 2x sockets, 1x plug and 1x mechanicalconnector.

VLDGT-VST Colour whiteVLDGT-VST-SI Colour silver

02080660208066SI

End cap VLDEAEnd cap in plastic for VLDGT trunking, catches for simpleclipping into functional end faces of empty trunking.

VLDEA Colour whiteVLDEA-STG Colour dusty grey

02025770202577AD

End cap VLDEBEnd cap in plastic for VLDGT, 1-lamp or 2-lamp, for finishing functional face ends with empty trunking.

VLDEB1 Colour whiteVLDEB1-STG Colour dusty greyVLDEB2 Colour whiteVLDEB2-STG Colour dusty grey

02025780202578AD

02025790202579AD

Gear tray cover VLDGA ... Kin plastic, to cover gear tray VLDGT ... in exposed operation without reflector

VLDGA 24 K-WS Colour whiteVLDGA 24 K-STG Colour dusty greyVLDGA 39 K-WS Colour whiteVLDGA 39 K-STG Colour dusty greyVLDGA 54 K-WS Colour whiteVLDGA 54 K-STG Colour dusty greyVLDGA 80 K-WS Colour whiteVLDGA 80 K-STG Colour dusty grey

02025810202581AD

02025820202582AD

02025830202583AD

02025840202584AD

Gear tray cover VLDGA ... BLIn sheet metal, to cover gear tray VLDGT ... in exposedoperation without reflector.

VLDGA .14/24 BL-WS Colour whiteVLDGA .14/24 BL-SI Colour silverVLDGA .21/39 BL-WS Colour whiteVLDGA .21/39 BL-SI Colour silverVLDGA .28/54 BL-WS Colour whiteVLDGA .28/54 BL-SI Colour silverVLDGA .35/49/80 BL-WS Colour whiteVLDGA .35/49/80 BL-SI Colour silver

02029450202945SI

02029460202946SI

02029470202947SI

02029480202948SI

Ceiling mounting VLDHDfor VLF/VLDF/VLDGT. Sturdy spring clip in spring steelfor ceiling installation of luminaires. Clip can be adjustedlengthwise for variable fixing distances. Admissible load15 kg, 1 pc.

VLDHD 0202590

Tube pendant VLDHPfor VLF/VLDF/VLDGT. Sturdy spring clip in steel, tubependant M13x1, canopy in plastic (dia 100, H 50), max.15 kg. Clip can be adjusted lengthwise for variable fixing distances.VLDHP 050 Length 0,50 m Colour whiteVLDHP 050 SI Length 0,50 m Colour silverVLDHP 100 Length 1,00 m Colour whiteVLDHP 100 SI Length 1,00 m Colour silver

02025930202593SI

02025940202594SI

Wire suspension VLDHSfor VLF/VLDF/VLDGT. Moulded-on ring loop at one endand steel wire dia. 1.5 mm, 1.5 m long, tooless heightadjustment, max. 15 kg. Clip can be adjusted lengthwisefor variable fixing distances.

VLDHS 0202591

Wire suspension VLDHSDfor VLF/VLDF/VLDGT. Ceiling fixing in metal (dia. 16, H20), sturdy spring clip in spring steel with integrated automatic wire clamp and steel wire dia. 1.5 mm, 1.5 mlong, gloss nickel plated, toolless height adjustment,max. 15 kg. Clip can be adjusted lengthwise for variablefixing distances. 1 pc.VLDHSD 0202592

Wall fixing VLDHWfor VLF/VLDF/VLDGT. Sturdy wall fixing bracket in steel,spring clip in spring steel. Screws and wall plugs forwall mounting not provided. Max. screw dia. 0.8 mm.Admissible load 15 kg. Clip can be adjusted lengthwisefor variable fixing distances.

VLDHW 0202597

Trunking connector VLDVConnector for trunking VLDGT (prefitted in VLDGT asstandard). Required for assembly of certain construc-tions.

VLDV 0202979

Wire suspension VLDHSTfor VLF/VLDF/VLDGT. For system ceilings with T-bar clip24-26 mm. Sturdy spring clip in spring steel with integrated automatic wire clamp and steel wire dia. 1.0mm, 1.5 m long. Toolless height adjustment, max. 10 kg.1 pc.

VLDHST 0202901

Page 15: LINIA Deco

123

VLDRVLDR...SI

VLDR, VLDRL, VLDRA ...

IP20

VLDF154+VLDRh [%] 81.5Phi_u [%] 100.0Phi_o [%] 0.0LITG_DIN A 40UTE 0.81D

VLDF254+VLDRh [%] 68.5Phi_u [%] 100.0Phi_o [%] 0.0LITG_DIN A 40UTE 0.69D

VLDRLVLDRL...SI

IP20

VLDF154+VLDRLh [%] 70.6Phi_u [%] 90.0Phi_o [%] 10.0LITG_DIN A 41UTE 0.64D 0.07T

VLDF254+VLDRLh [%] 67.3Phi_u [%] 89.0Phi_o [%] 11.0LITG_DIN B 41UTE 0.60D 0.07T

Reflector VLDR ..., VLDRL ..., VLDRA ... and accessories

Profiled galvanised reflector constructed of synthetic resin coated steel in white (VLDRL) or white on the inside andsilver on the outside (VLDRL ... SI). The reflectors are fitted with rims to accommodate the louvres. Includes reflec-tor connectors.

For use in conjunction with • Batten VLDF or• Gear tray VLDGT1 reflector is required per single luminaire or continuous lighting system section.

Profiled galvanised reflector constructed of synthetic resin partially perforated coated steel in white (VLDRL) orwhite on the inside and silver on the outside (VLDRL ... SI). The reflectors are fitted with rims to accommodate thelouvres. Includes reflector connecting elements. Indirect component due to partial perforation.

Dimens. [mm] WeightModel L1 B1 H1 [kg] Prod. code

VLDR 24 572 108 62 0,4 0202548

VLDR 24 SI 572 108 62 0,4 0202548SI

VLDR 39 872 108 62 0,7 0202549

VLDR 39 SI 872 108 62 0,7 0202549SI

VLDR 54 1172 108 62 0,9 0202550

VLDR 54 SI 1172 108 62 0,9 0202550SI

VLDR 80 1472 108 62 1,1 0202551

VLDR 80 SI 1472 108 62 1,1 0202551SI

Dimens. [mm] WeightModel L1 B1 H1 [kg] Prod. code

VLDRL 24 572 108 62 0,3 0202552

VLDRL 24 SI 572 108 62 0,3 0202552SI

VLDRL 39 872 108 62 0,5 0202553

VLDRL 39 SI 872 108 62 0,5 0202553SI

VLDRL 54 1172 108 62 0,8 0202554

VLDRL 54 SI 1172 108 62 0,8 0202554SI

VLDRL 80 1472 108 62 1,1 0202555

VLDRL 80 SI 1472 108 62 1,1 0202555SI

Page 16: LINIA Deco

124

IP20

VLDF154+VLDRAh [%] 76.5Phi_u [%] 100.0Phi_o [%] 0.0LITG_DIN A 50UTE 0.77C

VLDF254+VLDRAh [%] 61.5Phi_u [%] 100.0Phi_o [%] 0.0LITG_DIN A 50UTE 0.61C

VLDRA ...

Reflector VLDR ..., VLDRL ..., VLDRA ... and accessories

Reflector accessories

Profiled reflector made of anodised aluminium with hammertone surface finish. The reflectors are fitted with rimsto accommodate the louvres. Includes reflector connecting elements.

Dimens. [mm] WeightModel L1 B1 H1 [kg] Prod. code

VLDRA 24 572 108 62 0,1 0202548//632

VLDRA 39 872 108 62 0,2 0202549//632

VLDRA 54 1172 108 62 0,3 0202550//632

VLDRA 80 1472 108 62 0,4 0202551//632

Reflector end cap VLDREAfor VLDR, curved, in plastic. For closing the face ends ofluminaires. Clips into the reflector ends. Can be usedwith louvre VLDWR or without louvre.

VLDREA WhiteVLDREA-STG Dusty grey

02025880202588AD

Reflector end cap VLDREBfor VLDR, straight, in plastic. For closing the face ends ofluminaires. Clips into the reflector ends. Can be usedwith louvre VLDSRM / VLDSRG or without louvre.

VLDREB WhiteVLDREB-STG Dusty grey

02025890202589AD

Batten VLDF 1.. + reflector VLDR Batten VLDF 1.. + reflector VLDRA

Batten VLDF 1.. + reflector VLDRL

Combination examples

Page 17: LINIA Deco

125

IP20

VLDF154+VLDR+VLDSRM

h [%] 69.0Phi_u [%] 100.0Phi_o [%] 0.0LITG_DIN A 60UTE 0.69B

VLDF254+VLDR+VLDSRM

h [%] 59.8Phi_u [%] 100.0Phi_o [%] 0.0LITG_DIN A 60UTE 0.60B

VLDSRM

VLDSRM ..

VLDSRG

VLDSRG ..

IP20

VLDF154+VLDR+VLDSRG

h [%] 69.8Phi_u [%] 100.0Phi_o [%] 0.0LITG_DIN A 60UTE 0.70B

VLDF254+VLDR+VLDSRG

h [%] 60.1Phi_u [%] 100.0Phi_o [%] 0.0LITG_DIN A 60UTE 0.60B

Parabolic mirror louvre VLDSRM ..., VLDSRG ...

Louvre for insertion in reflector VLDR/VLDRL/VLDRA.For use in conjunction with • Batten series VLDFor• Gear tray VLDGTin conjunction with reflector VLDR, VLDRL or VLDRA1 louvre is required per single luminaire or continuous lighting system section.

Parabolic side reflectors and cross vanes made of matt anodised high reflectance super-purity aluminium. Can beinserted into the reflector rim.

Parabolic side reflectors and cross vanes made of specular high reflectance super-purity aluminium. Can be in-serted into the reflector rim.

Dimens. [mm] WeightModel L1 B1 H1 [kg] Prod. code

VLDSRM 24 572 92 62 0,1 0202568

VLDSRM 39 872 92 62 0,2 0202569

VLDSRM 54 1172 92 62 0,3 0202570

VLDSRM 80 1472 92 62 0,4 0202571

Dimens. [mm] WeightModel L1 B1 H1 [kg] Prod. code

VLDSRG 24 572 92 62 0,1 0202572

VLDSRG 39 872 92 62 0,2 0202573

VLDSRG 54 1172 92 62 0,3 0202574

VLDSRG 80 1472 92 62 0,4 0202575

Page 18: LINIA Deco

126

VLDF154+VLDRLh [%] 70.6Phi_u [%] 90.0Phi_o [%] 10.0LITG_DIN A 41UTE 0.64D 0.07T

VLDWR

VLDRW ..

IP20

VLDF154+VLDR+VLDWR

h [%] 65.6Phi_u [%] 100.0Phi_o [%] 0.0LITG_DIN A 40UTE 0.66C

VLDF254+VLDR+VLDWR

h [%] 58.8Phi_u [%] 100.0Phi_o [%] 0.0LITG_DIN A 50UTE 0.59C

VLDF154+VLDRL+VLDSRGh [%] 72.0Phi_u [%] 93.0Phi_o [%] 7.0LITG_DIN A 99UTE 0.67B 0.05T

VLDF154+VLDRL+VLDWRh [%] 67.1Phi_u [%] 86.0Phi_o [%] 14.0LITG_DIN B 41UTE 0.58D 0.09T

Cross-vane louvre VLDWR ...

Cross-blade louvre made of white coated steel. Good reflection properties and effective longitudinal glare limita-tion. Can be inserted in the reflector rim.

Louvre for insertion in reflector VLDR/VLDRL/VLDRA.Can be used in conjunction with• Batten VLDFor• Gear tray VLDGTin conjunction with reflactor VLDR, VLDRL or VLDRA1 louvre is required per single luminaire or continuous lighting system section.Note: If VLDWR is installed in schools, nursery schools, changing rooms etc. always include spring VLDWRS-T16 -0204002 when ordering.

Dimens. [mm] WeightModel L1 B1 H1 [kg] Prod. code

VLDWR 24 572 92 62 0,2 0202544

VLDWR 39 872 92 62 0,3 0202545

VLDWR 54 1172 92 62 0,5 0202546

VLDWR 80 1472 92 62 0,6 0202547

Combination examples

Batten VLDF 1.. + reflector VLDRL

Batten VLDF 1.. + reflector VLDRL + inlay louvre VLDSRG

Batten VLDF 1.. + reflector VLDRL + inlay louvre VLDWR

Page 19: LINIA Deco

127

VLDRIB

VLDRIT

VLDRIS

IP20

VLDF154+VLDRIBh [%] 99.5Phi_u [%] 100.0Phi_o [%] 0.0LITG_DIN A 40UTE 1.00D

VLDF254+VLDRIBh [%] 89.5Phi_u [%] 100.0Phi_o [%] 0.0LITG_DIN A 40UTE 0.90D

IP20

VLDF154+VLDRISh [%] 99.5Phi_u [%] 100.0Phi_o [%] 0.0LITG_DIN A 30UTE 1.00E

VLDF254+VLDRISh [%] 91.9Phi_u [%] 100.0Phi_o [%] 0.0LITG_DIN A 30UTE 0.92E

IP20

VLDF154+VLDRITh [%] 99.5Phi_u [%] 100.0Phi_o [%] 0.0LITG_DIN A 50UTE 1.00C

VLDF254+VLDRITh [%] 87.9Phi_u [%] 100.0Phi_o [%] 0.0LITG_DIN A 40UTE 0.88D

VLDRIB ..

VLDRIT ..

VLDRIS ..

Mirror reflector VLDRIB ... wide beam, VLDRIT ... narrow beam, VLDRIS ... asymmetric beam

For use in conjunction with• Batten series VLDFor• Gear tray VLDGT1 louvre is required per single luminaire or continuous lighting system section.

Edged single-shell reflector in highly rigid matt anodised high-reflectance super-purity aluminium. Wide-beam lightdistribution and high LOR.

Edged single-shell reflector in highly rigid matt anodised high-reflectance super-purity aluminium. Narrow-beamlight distribution and high LOR.

Edged single-shell reflector in highly rigid matt anodised high-reflectance super-purity aluminium. Asymmetriclight distribution and high LOR.

Dimens. [mm] WeightModel L1 B1 H1 [kg] Prod. code

VLDRIB 24 582 135 50 0,1 0202556

VLDRIB 39 882 135 50 0,2 0202557

VLDRIB 54 1182 135 50 0,3 0202558

VLDRIB 80 1482 135 50 0,4 0202559

Dimens. [mm] WeightModel L1 B1 H1 [kg] Prod. code

VLDRIT 24 582 175 37,5 0,1 0202560

VLDRIT 39 882 175 37,5 0,2 0202561

VLDRIT 54 1182 175 37,5 0,3 0202562

VLDRIT 80 1482 175 37,5 0,4 0202563

Dimens. [mm] WeightModel L1 B1 H1 [kg] Prod. code

VLDRIS 24 582 160 50 0,1 0202564

VLDRIS 39 882 160 50 0,2 0202565

VLDRIS 54 1182 160 50 0,3 0202566

VLDRIS 80 1482 160 50 0,4 0202567

Page 20: LINIA Deco

128

VLDD

VLDD ...

VLDD ... O-PC

IP20

VLDF154+VLDDh [%] 92.3Phi_u [%] 70.0Phi_o [%] 30.0LITG_DIN B 31UTE 0.65G 0.28T

IP20

VLDF154+VLDD-O-PCh [%] 83.2Phi_u [%] 69.0Phi_o [%] 31.0LITG_DIN B 31UTE 0.57G 0.26T

VLDD ... PCIP20

VLDF154+VLDD-PCh [%] 89.1Phi_u [%] 70.0Phi_o [%] 30.0LITG_DIN B 31UTE 0.62G 0.27T

Light diffuser VLDD ..., VLDD-S ...

For use in conjunction with • Batten series VLDF, 1-lampor• Gear tray VLDGT, 1-lamp1 diffuser is required per single luminaire or continuous lighting system section

Highly transparent plastic profile in UV-stabilised acrylic (PMMA) featuring a linear prism structure. For light refrac-tion and glare limitation. Clips onto the gear tray.

Opal plastic profile in impact-resistant polycarbonate (PC), UV-stabilised, with linear prism structure. For light re-fraction and glare limitation. Clips onto the gear tray..

Highly transparent plastic profile in impact-resistant polycarbonate (PC), UV-stabilised, with linear prism structure.For light refraction and glare limitation. Clips onto the gear tray.

Dimens. [mm] WeightModel L1 B1 H1

VLDD 114/24 573 0,1 0202536

VLDD 121/39 873 0,2 0202537

VLDD 128/54 1173 0,3 0202538

VLDD 135/49/80 1473 0,3 0202539

Dimens. [mm] WeightModel L1 B1 H1

VLDD 114/24 PC 573 0,1 0202540

VLDD 121/39 PC 873 0,2 0202541

VLDD 128/54 PC 1173 0,3 0202542

VLDD 135/49/80 PC 1473 0,3 0202543

Dimens. [mm] WeightModel L1 B1 H1

VLDD 114/24 O-PC 573 0,1 0208168

VLDD 121/39 O-PC 873 0,2 0208169

VLDD 128/54 O-PC 1173 0,3 0208170

VLDD 135/49/80 O-PC 1473 0,3 0208171

Page 21: LINIA Deco

129

VLDD-SIP20

VLDF154+VLDD-Sh [%] 92.3Phi_u [%] 70.0Phi_o [%] 30.0LITG_DIN B 31UTE 0.65G 0.28T

VLDD-S ... PCIP20

VLDF154+VLDD-S-PCh [%] 89.1Phi_u [%] 70.0Phi_o [%] 30.0LITG_DIN B 31UTE 0.62G 0.27T

VLDD-S ... O-PCIP20

VLDF154+VLDD-S-O-PC

h [%] 83.2Phi_u [%] 69.0Phi_o [%] 31.0LITG_DIN B 31UTE 0.57G 0.26T

Light diffuser VLDD ..., VLDD-S ...

Highly transparent plastic profile in UV-stabilised acrylic (PMMA) featuring a linear prism structure. For light refrac-tion and glare limitation. Clips onto the gear tray. Push guard should be used for vertical luminaire mounting

Highly transparent plastic profile in impact-resistant polycarbonate (PC) featuring a linear prism structure. For lightrefraction and glare limitation. Clips onto the gear tray. Push guard should be used for vertical luminaire mounting

Opal plastic profile in impact-resistant polycarbonate (PC) featuring a linear prism structure. For light refraction andglare limitation. Clips onto the gear tray. Push guard should be used for vertical luminaire mounting.

Dimens. [mm] WeightModel L1 B1 H1

VLDD-S 114/24 573 0,1 0202852

VLDD-S 121/39 873 0,2 0202853

VLDD-S 128/54 1173 0,3 0202854

VLDD-S 135/49/80 1473 0,3 0202855

Dimens. [mm] WeightModel L1 B1 H1

VLDD-S 114/24 PC 573 0,1 0208164

VLDD-S 121/39 PC 873 0,2 0208165

VLDD-S 128/54 PC 1173 0,3 0208166

VLDD-S 135/49/80 PC 1473 0,3 0208167

Dimens. [mm] WeightModel L1 B1 H1

VLDD-S 114/24 O-PC 573 0,1 0208172

VLDD-S 121/39 O-PC 873 0,2 0208173

VLDD-S 128/54 O-PC 1173 0,3 0208174

VLDD-S 135/49/80 O-PC 1473 0,3 0208175