Technical Data

LinkRunner™ Network Multimeter

Quickly verify and troubleshoot network drops with this essential, personal tool.

Frontline PC and network technicians

are the first line of defense against

problems at the physical and link lay-

ers of the network. Typical problems

the technician checks for include

determining whether the drop is active,

whether they can “ping” other network

resources, finding any cable problems

and tracing the cable path.

Designed for the frontline technician,

LinkRunner improves troubleshooting

and escalation accuracy by helping to

quickly identify if a problem is in the

network or the PC NIC. LinkRunner

performs essential tests for trouble-

shooting and solving problems in the

physical and link layers, the source of

80% of network problems.

Instant vision into the network drop.

That’s Network SuperVision.™ That’s

Fluke Networks’ promise to you.

LinkRunner helps you answer questions like:

• IsthisanactiveEthernetport?

• Whatspeed/duplexisthehub/switch/PCNICconfiguredfor?

• AmIseeingtrafficfromthisconnection?

• IsthePCNICokay?

• Wheredoesthecablego?

• AmIconnectedtotheInternet?

Perform the following tests quicklyLink–determinewhetherthedropisactive,identifyitsspeed,duplexcapabilities,servicetype(e.g.,Ethernet,Tokenring,Telco),andlocationonaswitch(supportsCiscoandExtremeDiscoveryProtocols).UserscanthenreconfigurethesesettingsonthehuborNICasneeded.NowdetectsuptoGigabitEthernet.

Length–determinewhetherthecablelengthiswithinspecifications,whattypeitis(straightorcrossover),andwhetherithasanyfaults.Thesetests,whichworkforbothstructuredandpatchcables,eliminatetheneedforaseparatecabletester.

Ping–verifyconnectivitytokeynetworkresourcesanddeterminewhetheraPCNICisresponding.

Actual size.

Drop Switch

See device capabilities, actual

link speed, and utilization levels.

Precisely locate switch ports

with Cisco Discovery Protocol.

Ping DNS server or key devices,

and observe response time.

Shop for Fluke Networks products at: 1.877.766.5412ShopFlukeNetworks.com

Ordering Information

Model Name Description

LINKRUNNER LinkRunnerNetworkMultimeter

LINKRUNNER-KIT LinkRunnerextendedtest(includesLinkRunnerandallaccessorieslistedbelowincludingcustomcarryingcase)

CIQ-SVC CableIQServiceKit(includesCableIQQualificationTesterwithcableIDnumbers1-7,LinkRunnerNetworkMultimeter,andIntelliTone200Probe)

CABLEIDKIT CableIDKit(numbers1-8)

LRUN-WM WiremapAdapter

RJ-45COUPLER RJ-45Coupler

MT-8200-53A IntelliTone100Probe

CLIPSET Clipadaptertotestunterminatedcables

BATT-AA-NIMH NiMHBatteryPack

NT-BATT-CHG NiMHBatteryCharger

LR-CASE CustomCarryingCaseforLinkRunnerExtendedTestKit

PC-INSP PCInspector

Fluke NetworksP.O.Box777,Everett,WAUSA98206-0777

Fluke Networks operatesinmorethan50countriesworldwide.Tofindyourlocalofficecontactdetails,gotowww.flukenetworks.com/contact.

©2005FlukeCorporation.Allrightsreserved.PrintedinU.S.A.4/20061995782D-ENG-NRevF

N E T W O R K S U P E R V I S I O N

Visit www.flukenetworks.com/linkrunner

and www.flukenetworks.com/keydevice

for more information.

LinkRunner Extended Test Kit Includes:

Allavailable

accessoriesandthe

customcarryingcase

FREE belt clip holster when you register your LinkRunner

Specifications

Mediaaccess 10BASE-Tand100BASE-TX

Identifies 10BASE-T,100BASE-TX(fullorhalf-duplex),GigabitEthernet,TokenRing,

Telco,CableID,un-poweredPCorhub,Auto-MDIXportsandAuto-Negotiation

orstrappedport

Cabletests Length,open,short,splits,wiremap,crossed,straightthrough

Ports RJ-45LAN,RJ-45Wiremap

Interface Pushbuttonnavigationoficon/menudrivenview

Power 2AAbatteriesstandard.OptionalNiMHbatteriesandbatterychargeravailable.

Approximately20hourscontinuoususewith4hoursofpinging.

Dimensions 2.75”wx3.75”hx1.25”d(6.98cmx9.52cmx3.17cm)

Weight 4.5oz/128gramswithbatteriesinstalled

Warranty Oneyear

CableIQ Service Kit Includes:

Allessentialcablequalificationandnetworkverificationtools.

Shop for Fluke Networks products at: 1.877.766.5412ShopFlukeNetworks.com