lintech … · l01 l02 l03 l04 l05 l06 l07 l08 l09 l10 l11 l12 prox (npn) l99 - other e11 - linear...
TRANSCRIPT
Terms of Sale
To OrderAny standard, or custom, product from LINTECH may be ordered by mail, email, on-line, phone, or fax from an Automation Specialist in your area. To obtain the name of your local Automation Specialist call:
1845 Enterprise WayMonrovia, CA 91016(800) 435 - 7494 (626) 358 - 0110 (626) 303 - 2035
LINTECH ®
Toll Free:Phone:Fax:
DeliveryAll shipping promises are made in good faith. Any shipping dates appearing on acknowledgments of orders or given to a customer in any other manner are approximate. Where the customer delays in supplying information necessary to proceeding with an order, the date of shipment may be extended accordingly. Standard products from LINTECH are usually available for delivery within 1 to 6 weeks of receipt of a purchase order. However, component short-ages, labor disputes, or any other unforeseen circumstance may delay the delivery of an order. LINTECH shall not be held liable under any circumstance. All products are shipped F.O.B. Monrovia, CA. LINTECH packages all standard and custom products care-fully. However, LINTECH is not liable for damage incurred during shipment. Contact the carrier immediately if damage to a package or shipment is noticed upon receipt of such shipment.
Payment TermsUnless otherwise specified, payment shall be made by C.O.D, credit card (AMEX, Visa, or Master Card), or net thirty (30) days (pending credit approval) from date of shipment of the items purchased hereunder in U.S. currency. LINTECH reserves the right to require deposit payments on non-standard items, customs, or product built to Buyer's designs or specifications. Amounts not timely paid shall bear interest at the rate of 1.5% for each month or a portion thereof that Buyer is late in making payments. No responsibility is assumed by LINTECH for damages arising from delivery delays, fires, strikes, material shortages, accidents, or any other cause whatsoever, and purchase orders are accepted subject only to these conditions irrespective of statements or stipulations on purchase orders. Prices in this price book are subject to change without prior notice.
All required options should be reviewed using the part numbering guide for each model series. Your local Automation Specialist or factory personnel can assist you with any questions you may have.
Web Site:E-Mail:
WarrantyAll LINTECH products are guaranteed to be free from defects in material and workmanship, under normal use, for a period of one year after date of shipment. This warranty covers the repair or replacement of a product when it is sent prepaid to LINTECH. LINTECH does not assume liability for installation, abuse, altera-tion, insufficient application data provided for a design, or misuse of any positioning system. Products furnished by LINTECH, but not manufactured by LINTECH (motors, gearheads, encoders, ampli-fiers, etc....), are subject to the manufacturers standard warranty terms and conditions.
ReturnsAny product requiring a return to LINTECH (for warranty or non-warranty repair) requires pre-approval from the factory prior to shipment. Contact the customer service department at (800) 435-7494 in order to obtain a RMA (Return Materials Authoriza-tion) number. At that time, please have your system Model & Serial numbers available, along with the reason for the return. The RMA number should be clearly marked on the returned package label and your packing list, or shipping document. Return product freight prepaid in its original package or one with comparable protection. LINTECH will not accept return shipments sent freight collect. Product damage incurred during return shipment, from poor pack-aging, will not be warranted by LINTECH. Keeping original pack-ing materials is recommended until initial inspection and testing is completed.
Dimensions and Product ChangesPublished dimensions shown in LINTECH catalogs are known to be accurate at time of printing. LINTECH shall not be held liable, under any circumstances, for any wrongly documented dimension or specification. Changes in design are made whenever LINTECH believes its products will improve by the change. No obligation to incorporate these changes in units manufactured prior to a change will be assumed.
CancellationsAll items entered for production and on which a cancellation is requested shall be paid for on the basis of actual cost of labor, materials, and supplies applied to the production of such items plus proper overhead expenses determined in accordance with good ac-counting practice, plus 25% of the total of such cost and expenses; provided that such cost and expense plus 25% shall in no case exceed 100% of the quoted price of original order. Upon cancella-tion, LINTECH may dispose of materials used in the manufacture of cancelled order as it sees fit.
Minimum Order AmountLINTECH requires a minimum of $30 List Price U.S. currency on all orders.
Pages
1
130 Series
110 Series
100 Series
Table Series
2 - 5
10 -13
14 - 17
Table of Contents
120 Series
50 - 53
550 Series
90 Series
150 Series
18 - 21
36 - 41
42 - 45
200 Series 46 - 49
250 Series
54 - 57
300 Series
400 Series
58 - 59
30 - 35
180 Series
.............................................
.............................................
.............................................
.............................................
.............................................
.............................................
.............................................
.............................................
.............................................
.............................................
.............................................
.............................................
22 - 25
160 Series ............................................. 26 - 29
170 Series .............................................
Expedite ChargesMany factors are involved when trying to expetite the delivery of a LINTECH positioning system beyond our normal 2 to 6 week period. They could include extra part costs, labor costs, and/or shipping costs. Therefore, each individual case is evaluated and handled separately. Sometimes, based on circumstances, a delivery time cannot be improved no matter what a customer is willing to pay. Please contact LINTECH to obtain the extra cost that might be required in order to improve upon our normal delivery times.
Once an expedite charge is determined and then accepted by a customer, LINTECH tries everything in its power to ship the product with the new expedited delivery time. However, there will be instances where circumstances beyond our control will NOT allow us to ship the product within the new expedite delivery time. If this situation were to occur, LINTECH will not charge the customer the previously agreed upon expedite charge.
140 Series 6 - 9 .............................................
60 - 61
Ordering Guide 130 Series- Screw Drive -
2
Table Series
Number of Bearings
Carriage Length
Travel Length
Cover Plate
Screw Options
Limit & Home Switches
Coupling Options
Encoder Options
Power-off Brakes
CP0 - no cover plates
1 - 1 bearing per carriage 2 - 2 bearings per carriage
4 - 4 inches
02 - 2 to 60 inches
other
S005 - .625 x .200 NPLS006 -
S001 -S002 -
S009 -S010 -
C000 - none
E00 - none E01 - rotary (500 lines/rev)
E02 - rotary (1000 lines/rev) E03 - rotary (1270 lines/rev)
E10 - linear (2500 lines/inch) E99 - other
B00 - none B01 - 24 VDC B02 - 90 VDC B99 - other
Rolled ball screws
.625 x .200 PL
.500 x .500 NPL
.500 x .500 PL
.625 x 1.000 NPL
.625 x 1.000 PL
- .625 x .200 NPL-----
Precision ball screws
.625 x .200 PL16 x 5 NPL16 x 5 PL16 x 10 NPL16 x 10 PL
C020 to C024 - C100 C040 to C047 - C125
C125 to C129 - H100 C145 to C154 - H131
C400 to C406 - G100 C425 to C434 - G126 C999 - other
EOT switches only EOT & home switches
L00 - no switches
home switch only
Mechanical Reed HallL01 L02 L03
L04 L05 L06
L07 L08 L09
L10 L11 L12
Prox (NPN)L99 - other
E11 - linear (250 lines/mm)
M02 C145 ---- B00E00- 102 - L01-- CP04213
Carriage Inserts1 - English mount 2 - Metric mount
S007 - .625 x .200 NPL(T)
S003 - .500 x .500 NPL(T)
S011 - .625 x 1.000 NPL(T)
- .625 x .200 PL
--
Ground ball screws
16 x 5 PL 16 x 16 PL
.625 x .100 NPL Rolled acme screws
.625 x .100 PL
.625 x .200 NPL
.625 x .200 PL
--
16 x 16 NPL16 x 16 PL
Motor Mount M00 - none M01 - hand crank
M02 - NEMA 23 mount (E)
M04 - NEMA 34 mount (E) M07 -
M09 -
NEMA 23 (LH) wrap
M99 - NEMA 34 (LH) wrap
M06 - NEMA 23 (RH) wrap
M08 - NEMA 34 (RH) wrap M03 - NEMA 23 mount (M)
M05 - NEMA 34 mount (M)
S999 - other
S117 S118
S114 S115
S120 S121
S119
S116
S212
S214 S215
- .625 x .500 PL S213
-
--
S300
S302 S303
-S301
16 x 4 NPL16 x 4 PL
--
S304 S305
S114
L13 L14 L15
Prox (PNP)
(E) - English Interface(LH) - Left Hand(M) - Metric Interface
(NPL) - Non Preloaded(PL) - Preloaded(RH) - Right Hand(T) - Turcite Nut
CP1 - top cover plate only
CP2 - top & side cover plates
S004 - .500 x .500 PL(T)
S008 - .625 x .200 PL(T)
S012 - .625 x 1.000 PL(T)
- 16 x 10 PL S223
3
Pricing Example: 132408-CP1-1-S001-M02-C125-L01-E00-B01 for Top (Y) axis132460-CP1-1-S002-M04-C145-L01-E00-B00 for Bottom (X) axisMounted in an X-Y configuration with a “45762” carriage adapter plate
132408-CP1-1-S001-M02-C125-L01-E00-B01
=========
$ 920100
0391
7065
1700
525
G100-312-250G100-312-375G100-312-500G100-312-006G100-312-008G100-312-010G100-312-012
C400C401C402C403C404C405C406
G126-312-250G126-312-375G126-312-500G126-312-625G126-312-006G126-312-008G126-312-010G126-312-012G126-312-014G126-312-016
C425C426C427C428C429C430C431C432C433C434
C100-312-250C100-312-375C100-312-006C100-312-008C100-312-010
C020C021C022C023C024
C125-312-250C125-312-375C125-312-500C125-312-006C125-312-008C125-312-010C125-312-012C125-312-014
C040C041C042C043C044C045C046C047
H100-312-250H100-312-375H100-312-006H100-312-008H100-312-010
C125C126C127C128C129
H131-312-250H131-312-375H131-312-500H131-312-625H131-312-006H131-312-008H131-312-010H131-312-012H131-312-014H131-312-016
C145C146C147C148C149C150C151C152C153C154
132460-CP1-1-S002-M04-C145-L01-E00-B00
=========
$ 2,685150
0982130
85170
00
$ 2,241
$ 4,202
45762 adapter plateMounting Charge
==
$ 65100
$ 165
Coupling Part Numbers
Options 130 Series- Screw Drive -
Note: Coupling style C125 & H131 can not be used with the NEMA 23 motor mounts (M02 & M03) because of the coupling length. The NEMA 34 motor mounts (M04 & M05), or a custom motor mount is required.
4
130-CP0 Series* screw drive
* without cover plates
* 4 inch carriage
130-CP1 Series* screw drive
* with top cover plate only
* 4 inch carriage
2468
12
Travel Length
inches
16202430
3642485460
Linear EncodersCover Plate OptionsModel #
131402131404131406131408131412
131416131420131424131430
131436131442131448131454131460
Price
$ 720
1 bearingSystem
Model #
132402132404132406132408132412
132416132420132424132430
132436132442132448132454132460
Price2 bearingSystem
NC $ 220
CP0 CP2
NCNCNCNC
NCNCNCNC
NCNCNCNCNC
E10 or E11(mm)
(50)
(100)
(150)
(200)
(300)
(405)
(505)
(605)
(760)
(910)
(1520)
(1370)
(1215)
(1060)
765790850945
1,0951,2801,3401,465
1,6802,0152,2152,4202,615
$ 790835860920
1,015
1,1651,3501,4101,535
1,7502,0852,2852,4902,685
230240 250260
270280 290 300
310320 330340 350
Motor Mounts
M01 ........................................... $ - Hand crankM02 ............................. $ - NEMA 23 mount (E)M03 ............................. $ - NEMA 23 mount (M)M04 ............................. $ - NEMA 34 mount (E)M05 ............................. $ - NEMA 34 mount (M)M06 ........... $ 300- NEMA 23 right hand (RH) wrapM07 .............. $ 300- NEMA 23 left hand (LH) wrapM08 ............ $ 540- NEMA 34 right hand (RH) wrapM09 .............. $ 540- NEMA 34 left hand (LH) wrap
Coupling Options
........................... $ 80C020 to - C100 style C024
........................... $ 105C040 to - C125 style C047
........................... $ 65C125 to - H100 style C129
........................... $ 85C145 to - H131 style C154
........................... $ 110C400 to - G100 style C406
........................... $ 140C425 to - G126 style C434
M99 ............................. P.O.R.- Other motor mounts
Carriage Inserts
1 ....................................... $ NC- English Mount
Limit & Home Switches
L01 .......... $ 170- EOT & home wired (mechanical)L02 ................ $ 135- EOT only wired (mechanical)L03 .............. $ 120- Home only wired (mechanical)
2 ......................................... $ - Metric Mount
L04 .................... $ 200- EOT & home wired (reed)L05 .......................... $ 150- EOT only wired (reed)L06 ........................ $ 130- Home only wired (reed)
L07 ...................... $ 370- EOT & home wired (hall)L08 ............................ $ 275- EOT only wired (hall)L09 .......................... $ 195- Home only wired (hall)
L10 ............ $ 375- EOT & home wired (prox-NPN)L11 .................. $ 285- EOT only wired (prox-NPN)L12 ................ $ 185- Home only wired (prox-NPN)
L13 ............ $ 375- EOT & home wired (prox-PNP)L14 .................. $ 285- EOT only wired (prox-PNP)L15 ................ $ 185- Home only wired (prox-PNP)
225130
13570
180
100
Rotary Encoders
E01 ......................................... $ 600- 500 lines/revE02 ....................................... $ 600- 1000 lines/revE03 ....................................... $ 600- 1270 lines/rev
Power-off Brakes
B01 ................................................. $ 525- 24 VDCB02 ................................................. $ 525- 90 VDC
P.O.R. - Price On RequestNC - No Charge
Options 130 Series- Screw Drive -
$ 85
CP1
90 95
100 105
110 115 120 125
130 135 140 145 150
130-CP2 Series* screw drive
* with top & side cover plates
* 4 inch carriage
* with motor coupling cover
* without motor coupling cover
(1) The -CP2 option is NOT available with any Linear Encoder option.
(1) (1)
P.O.R.P.O.R.
P.O.R.P.O.R.
P.O.R.P.O.R.
P.O.R.P.O.R.
P.O.R.P.O.R.
P.O.R.P.O.R.P.O.R.
P.O.R.
5
Travel Length
SCREW Price - Additional Price Per Axis
2 thru 12(50) thru (300)
Rolled Ball Screws
S001 S002 S003 S005 S010S006 S007 S009 S011inches(mm)
Precision Ball Screws
S114 S115 S116 S117 S121S118 S119 S120
Rolled Acme Screws
S300 S301 S302 S303 S304 S305
Ground Ball Screws
S212 S213 S214 S215
16 thru 30(405) thru (760)
36 thru 60(910) thru (1520)
Travel Length
2 thru 12(50) thru (300)
inches(mm)
16 thru 30(405) thru (760)
36 thru 60(910) thru (1520)
Travel Length
2 thru 6(50) thru (150)
inches(mm)
8 thru 16(200) thru (405)
Travel Length
2 thru 12(50) thru (300)
inches(mm)
16 thru 30(405) thru (760)
36 thru 60(910) thru (1520)
$ 391
454
518
$ 818
885
982
$ 99
162
225
$ 124
149
175
$ 318
343
369
$ 813
940
1,071
$1,530
1,705
1,837
$ 224
356
488
NC
NC
NC
$ 229
303
377
$ 478
551
626
$ 260
323
386
$ 558
621
683
$ 342
435
527
$ 665
756
849
$ 310
421
533
$ 645
757
869
20 thru 36(505) thru (910)
$1,003
1,300
1,685
$1,003
1,300
1,685
$ 166
219
271
$ 297
347
399
$ 180
256
329
$ 354
426
497
(1)
(1) Not available in a 2 inch (50 mm) travel.
Power Supplies
part # 41970 ... $ 150- 5 VDC (120/240 VAC input)part # 37488 . $ 150- 24 VDC (120/240 VAC input)part # 37489 ........ $ 165- 90 VDC (120 VAC input)part # 37490 ........ $ 165- 90 VDC (240 VAC input)
Multiple Axis Angle Brackets
Multiple Axis Mounting Charges
X-Y system with NO Bracket or Plate .............X-Y or X-Z system with Bracket or Plate ........X-Y-Z system with Bracket or Plate ................
.......part # 201176 - English mount (130 to 130)
part # 201177 - Metric mount (130 to 130) ................part # 47541 - English mount (130 to 100)
part # 201188 - Metric mount (130 to 100) .........
$ $ $ $
$ $ $
100140200
445545445595
Note: The above multiple axis mounting charges DO NOT include the adapter plate, or angle bracket. If required, an adapter plate or angle bracket, needs to be ordered separately.
Chrome Plated Linear Rails, Screw & Nut ... P.O.R.
Carriage Adapter Plates
..part # 45762 - English mount (CP0 to CP1/CP2)
part # 201180 - Metric mount (CP0 to CP1/CP2) ...........part # 46562 - English mount (130 to 100)
part # 201185 - Metric mount (130 to 100) .........
$ $ $ $
65170100205
P.O.R. - Price On RequestNC - No Charge
Options 130 Series- Screw Drive -
S012
$ 387
520
645
S008
$ 150
150
150
S004
$ 225
286
357
S223
$1,227
1,612
2,064
P.O.R.
P.O.R.
P.O.R.
P.O.R.
P.O.R.
P.O.R.
P.O.R.
P.O.R.
P.O.R.
P.O.R.
P.O.R.
P.O.R.
6
Ordering Guide 140 Series- Belt Drive -
Table Series
Carriage Length
Travel Length
Drive Shaft
D2
Motor Mount
-D1 - Right Hand single shaft
4 - 4 inches
004 - 4 to 120 inches
M00 - none M02 -M03 - NEMA 23 mount (M)
NEMA 23 mount (E)
Limit & Home Switches
Coupling Options
Encoder Options
Power-off Brakes
C000 - none
L00 - no switches
C130 to C134 - H100 C155 to C164 - H131
C407 to C413 - G100 C435 to C444 - G126 C470 to C480 - G158
L99 - other
M99 - other
C999 - none
note: When selecting any rotary encoder option, the Drive Shaft D3 or D4 above is required.
note: When selecting any brake option, the Drive Shaft D3 or D4 above is required.B00 - none B01 - 24 VDC B02 - 90 VDC B99 - other
E00 - none E01 - rotary (500 lines/rev)
E02 - rotary (1000 lines/rev) E03 - rotary (1270 lines/rev)
E99 - other
M02 C155 ---- B00E00D1 - L04-
M04 -M05 - NEMA 34 mount (M)
NEMA 34 mount (E)
(E) - English Interface(M) - Metric Interface
Left Hand single shaft D4 -D3 - Right Hand thru shaft
Left Hand thru shaft
EOT switches only EOT & home switches
home switch only
Reed HallL04 L05 L06
L07 L08 L09
L10 L11 L12
Prox (NPN)L13 L14 L15
Prox (PNP)
- 1- CP14214
Number of Bearings1 - 1 bearing per carriage 2 - 2 bearings per carriage
004
Cover PlateCP1 - top cover plate onlyCP0 - no cover plate
Carriage Inserts1 - English mount 2 - Metric mount
C190 to C200 - H163
7
H100-375-250H100-375-375H100-375-006H100-375-008H100-375-010
C130C131C132C133C134
H163-375-375H163-375-500H163-375-625H163-375-750H163-375-010H163-375-012H163-375-014H163-375-016H163-375-018H163-375-019H163-375-020
C190C191C192C193C194C195C196C197C198C199C200
C407C408C409C410C411C412C413
G100-375-250G100-375-375G100-375-500G100-375-006G100-375-008G100-375-010G100-375-012
C435C436C437C438C439C440C441C442C443C444
G126-375-250G126-375-375G126-375-500G126-375-625G126-375-006G126-375-008G126-375-010G126-375-012G126-375-014G126-375-016
C470C471C472C473C474C475C476C477C478C479C480
G158-375-375G158-375-500G158-375-625G158-375-750G158-375-010G158-375-012G158-375-014G158-375-016G158-375-018G158-375-019G158-375-020
Pricing Example: 1424048-CP1-1-D3-M02-C155-L10-E00-B02 for Top (Y) axis1424072-CP1-1-D3-M02-C155-L10-E00-B00 for Bottom (X) axis Master1424072-CP1-1-D3-M00-C000-L00-E00-B02 for Bottom (X) axis Slave
1424048-CP1-1-D3-M02-C155-L10-E00-B02
=========
$ 1,945140
035
13085
3750
525$ 3,235
Qty 2 (part #44192)Qty 2 (part # C191)Qty 2 (part #45762)47.5 inch cross shaft
====
$ 130200130
71
$ 531
1424072-CP1-1-D3-M02-C155-L10-E00-B00
=========
$ 2,870160
035
13085
37500
$ 3,6551424072-CP1-1-D3-M00-C000-L00-E00-B02
=========
$ 2,870160
035
0000
525$ 3,590
H131-375-250H131-375-375H131-375-500H131-375-625H131-375-006H131-375-008H131-375-010H131-375-012H131-375-014H131-375-016
C155C156C157C158C159C160C161C162C163C164
Note: Coupling style H163 & G158 can not be used with the NEMA 23 or NEMA 34 motor mounts (M02, M03, M04, & M05) because of the coupling length & diameter. No motor mount, or a custom motor mount is required.
Coupling Part Numbers
Options 140 Series- Belt Drive -
8
468
12
Travel Length
inches
16
2024303642
485460
Model #
14140041414006141400814140121414016
14140201414024141403014140361414042
1414048141405414140601414072
Price1 bearing System
14240041424006142400814240121424016
14240201424024142403014240361424042
1424048142405414240601424072
(mm)
(100)
(150)
(200)
(300)
(405)
(505)
(605)
(760)
(910)
(1520)
(1370)
(1215)
(1060)
1414084
141409614141081414120
1424084
142409614241081424120
7284 (2130)
(1825)
96 (2435)
108120 (3045)
(2740)
Model #
GIL23-03
Gearhead Price
GIL34-03
GRA23-02GRA23-03
GRA34-02GRA34-03
GRA23-01
GRA34-01
$ 1,2301,2701,3001,3151,470
1,4851,5751,6351,7101,800
1,8751,9802,3702,8003,785
4,6155,4506,450
$ 1,2901,3301,3601,3751,530
1,5451,6551,6951,7701,870
1,9452,0352,4402,8703,855
4,6855,5206,520
P.O.R. - Price On Request
NC - No Charge
Options 140 Series- Belt Drive -
Cover Plate Options
NC
CP0
NCNCNCNC
NCNCNCNCNC
NCNCNCNC
CP1
NC
NCNCNC
NA
NANANA
Model # Price2 bearing System
NA - Not Available
(1)
(1)
(1)
(1)
(1)
140-CP0 Series* belt drive
* without cover plates
* 4 inch carriage
140-CP1 Series* belt drive
* with top cover plate only
* 4 inch carriage
140-CP2 Series* belt drive
* with top & side cover plates
* 4 inch carriage
CP2
$ 230
370
240250 260 270
280290300 310320
330 340 350
$ 90
160
95 100 105 110
115 120 125 130 135
140 145 150
230
250240
260
(1)
(1)
(1)
(1)
For travels greater than 72 inches the TOP cover plate CAN NOT be used. This is due to the cover plate weight, which causes excess de-flection at mid stroke, which causes the plate to rub on the carriage.
P.O.R.
P.O.R.
P.O.R.P.O.R.P.O.R.
P.O.R.P.O.R.P.O.R.
9
P.O.R. - Price On RequestNC - No Charge
Options 140 Series- Belt Drive -
Coupling Options
........................... $ 65C130 to - H100 style C134
........................... $ 85C155 to - H131 style C164
........................... $ 100C190 to - H163 style C200
........................... $ 110C407 to - G100 style C413
........................... $ 140C435 to - G126 style C444
........................... $ 175C470 to - G158 style C480
Rotary Encoders
E01 ......................................... $ 600- 500 lines/revE02 ....................................... $ 600- 1000 lines/revE03 ....................................... $ 600- 1270 lines/rev
Power-off Brakes
B01 ................................................. $ 525- 24 VDCB02 ................................................. $ 525- 90 VDC
Power Supplies
part # 41970 ... $ 150- 5 VDC (120/240 VAC input)part # 37488 . $ 150- 24 VDC (120/240 VAC input)part # 37489 ........ $ 165- 90 VDC (120 VAC input)part # 37490 ........ $ 165- 90 VDC (240 VAC input)
Carriage Inserts
1 ....................................... $ NC- English Mount
Limit & Home Switches
2 ......................................... $ - Metric Mount
L04 .................... $ 200- EOT & home wired (reed)L05 .......................... $ 150- EOT only wired (reed)L06 ........................ $ 130- Home only wired (reed)
L07 ...................... $ 370- EOT & home wired (hall)L08 ............................ $ 275- EOT only wired (hall)L09 .......................... $ 195- Home only wired (hall)
L10 ............ $ 375- EOT & home wired (prox-NPN)L11 .................. $ 285- EOT only wired (prox-NPN)L12 ................ $ 185- Home only wired (prox-NPN)
L13 ............ $ 375- EOT & home wired (prox-PNP)L14 .................. $ 285- EOT only wired (prox-PNP)L15 ................ $ 185- Home only wired (prox-PNP)
Motor Mounts
M02 ............................. $ - NEMA 23 mount (E)M03 ............................. $ - NEMA 23 mount (M)M04 ............................. $ - NEMA 34 mount (E)M05 ............................. $ - NEMA 34 mount (M)M99 ............................. P.O.R.- Other motor mounts
Drive Shaft
D1 or D2 ....... $ NC- Right or left hand single shaft$ D3 or D4 ..........- Right or left hand thru shaft
Cross Shaft ........................................ $ 1.50 per inch .............part # 44192 - Cross Shaft Support $ 65
100
35
130
260160220
Chrome Plated Linear Rails .......................... P.O.R.
P.O.R. - Price On RequestNC - No Charge
Multiple Axis Angle Brackets
Multiple Axis Mounting Charges
X-Y system with NO Bracket or Plate .............X-Y or X-Z system with Bracket or Plate ........X-Y-Z system with Bracket or Plate ................
.......part # 201176 - English mount (140 to 140)
part # 201177 - Metric mount (140 to 140) ................part # 47541 - English mount (140 to 100)
part # 201188 - Metric mount (140 to 100) .........
$ $ $ $
$ $ $
100140200
445545445595
Note: The above multiple axis mounting charges DO NOT include the adapter plate, or angle bracket. If required, an adapter plate or angle bracket, needs to be ordered separately.
Carriage Adapter Plates
..part # 45762 - English mount (CP0 to CP1/CP2)
part # 201180 - Metric mount (CP0 to CP1/CP2) ...........part # 46562 - English mount (140 to 100)
part # 201185 - Metric mount (140 to 100) .........
$ $ $ $
65170100205
10
Ordering Guide 100 Series- Screw Drive -
Table Series
Number of Bearings
Carriage Length
Travel Length
Cover Plate
Screw Options
Limit & Home Switches
Coupling Options
Encoder Options
Power-off Brakes
CP0 - no cover plates
2 - 2 bearings per carriage 4 - 4 bearings per carriage
4 - 4 inches
02 - 2 to 60 inches
other
S005 - .625 x .200 NPLS006 -
S001 -S002 -
S009 -S010 -
C000 - none
E00 - none E01 - rotary (500 lines/rev)
E02 - rotary (1000 lines/rev) E03 - rotary (1270 lines/rev)
E10 - linear (2500 lines/inch) E99 - other
B00 - none B01 - 24 VDC B02 - 90 VDC B99 - other
Rolled ball screws
.625 x .200 PL
.500 x .500 NPL
.500 x .500 PL
.625 x 1.000 NPL
.625 x 1.000 PL
- .625 x .200 NPL-----
Precision ball screws
.625 x .200 PL16 x 5 NPL16 x 5 PL16 x 10 NPL16 x 10 PL
C020 to C024 - C100 C040 to C047 - C125
C125 to C129 - H100 C145 to C154 - H131
C400 to C406 - G100 C425 to C434 - G126 C999 - other
EOT switches only EOT & home switches
L00 - no switches
home switch only
Mechanical Reed HallL01 L02 L03
L04 L05 L06
L07 L08 L09
L10 L11 L12
Prox (NPN)L99 - other
E11 - linear (250 lines/mm)
M02 C145 ---- B00E00- 102 - L01-- CP04410
Carriage Inserts1 - English mount 2 - Metric mount
S007 - .625 x .200 NPL(T)
S003 - .500 x .500 NPL(T)
S011 - .625 x 1.000 NPL(T)
- .625 x .200 PL
--
Ground ball screws
16 x 5 PL 16 x 16 PL
.625 x .100 NPL Rolled acme screws
.625 x .100 PL
.625 x .200 NPL
.625 x .200 PL
--
16 x 16 NPL16 x 16 PL
Motor MountM00 - none M01 - hand crank
M02 - NEMA 23 mount (E)
M04 - NEMA 34 mount (E) M07 -
M09 -
NEMA 23 (LH) wrap
M99 - NEMA 34 (LH) wrap
M06 - NEMA 23 (RH) wrap
M08 - NEMA 34 (RH) wrap M03 - NEMA 23 mount (M)
M05 - NEMA 34 mount (M)
S999 - other
S117 S118
S114 S115
S120 S121
S119
S116
S212
S214 S215
- .625 x .500 PL S213
-
--
S300
S302 S303
-S301
16 x 4 NPL16 x 4 PL
--
S304 S305
S114
L13 L14 L15
Prox (PNP)
(E) - English Interface(LH) - Left Hand(M) - Metric Interface
(NPL) - Non Preloaded(PL) - Preloaded(RH) - Right Hand(T) - Turcite Nut
CP1 - top cover plate only
CP2 - top & side cover plates
S004 - .500 x .500 PL(T)
S008 - .625 x .200 PL(T)
S012 - .625 x 1.000 PL(T)
- 16 x 10 PL S223
11
Pricing Example: 102416-CP0-2-S117-M03-C400-L10-E00-B00 for Top (Y) axis104448-CP0-2-S117-M05-C425-L10-E00-B00 for Bottom (X) axisMounted in an X-Y configuration
102416-CP0-2-S117-M03-C400-L10-E00-B00
=========
$ 1,2900
100621180110375
00
G100-312-250G100-312-375G100-312-500G100-312-006G100-312-008G100-312-010G100-312-012
C400C401C402C403C404C405C406
G126-312-250G126-312-375G126-312-500G126-312-625G126-312-006G126-312-008G126-312-010G126-312-012G126-312-014G126-312-016
C425C426C427C428C429C430C431C432C433C434
C100-312-250C100-312-375C100-312-006C100-312-008C100-312-010
C020C021C022C023C024
C125-312-250C125-312-375C125-312-500C125-312-006C125-312-008C125-312-010C125-312-012C125-312-014
C040C041C042C043C044C045C046C047
H100-312-250H100-312-375H100-312-006H100-312-008H100-312-010
C125C126C127C128C129
H131-312-250H131-312-375H131-312-500H131-312-625H131-312-006H131-312-008H131-312-010H131-312-012H131-312-014H131-312-016
C145C146C147C148C149C150C151C152C153C154
104448-CP0-2-S117-M05-C425-L10-E00-B00
=========
$ 2,8500
100683225140375
00
$ 2,676
$ 4,373
Mounting Charge = $ 100
$ 100
Coupling Part Numbers
Options 100 Series- Screw Drive -
Note: Coupling style C125 & H131 can not be used with the NEMA 23 motor mounts (M02 & M03) because of the coupling length. The NEMA 34 motor mounts (M04 & M05), or a custom motor mount is required.
12
2468
12
Travel Length
inches
16202430
3642485460
Linear EncodersCover Plate OptionsModel #
102402102404102406102408102412
102416102420102424102430
102436102442102448102454102460
Price2 bearingSystem
Model #
104402104404104406104408104412
104416104420104424104430
104436104442104448104454104460
Price4 bearingSystem
NC $ 295
CP0 CP2
NCNCNCNC
NCNCNCNC
NCNCNCNCNC
E10 or E11(mm)
(50)
(100)
(150)
(200)
(300)
(405)
(505)
(605)
(760)
(910)
(1520)
(1370)
(1215)
(1060)
310 325 340 355
370 385 400 415
430 445 460 475 490
$ 890920
1,0051,0201,175
1,2901,4201,5751,830
2,3652,5252,7102,8653,080
$ 1,0301,0601,1451,1601,315
1,4301,5601,7151,970
2,5052,6652,8503,0053,220
Motor Mounts
M01 ........................................... $ - Hand crankM02 ............................. $ - NEMA 23 mount (E)M03 ............................. $ - NEMA 23 mount (M)M04 ............................. $ - NEMA 34 mount (E)M05 ............................. $ - NEMA 34 mount (M)M06 ........... $ 300- NEMA 23 right hand (RH) wrapM07 .............. $ 300- NEMA 23 left hand (LH) wrapM08 ............ $ 540- NEMA 34 right hand (RH) wrapM09 .............. $ 540- NEMA 34 left hand (LH) wrap
Coupling Options
........................... $ 80C020 to - C100 style C024
........................... $ 105C040 to - C125 style C047
........................... $ 65C125 to - H100 style C129
........................... $ 85C145 to - H131 style C154
........................... $ 110C400 to - G100 style C406
........................... $ 140C425 to - G126 style C434
M99 ............................. P.O.R.- Other motor mounts
Carriage Inserts
1 ....................................... $ NC- English Mount
Limit & Home Switches
L01 ..........- EOT & home wired (mechanical)L02 ................- EOT only wired (mechanical)L03 ..............- Home only wired (mechanical)
2 ......................................... $ - Metric Mount
L04 ....................- EOT & home wired (reed)L05 ..........................- EOT only wired (reed)L06 ........................- Home only wired (reed)
L07 ......................- EOT & home wired (hall)L08 ............................- EOT only wired (hall)L09 ..........................- Home only wired (hall)
L10 ............- EOT & home wired (prox-NPN)L11 ..................- EOT only wired (prox-NPN)L12 ................- Home only wired (prox-NPN)
L13 ............- EOT & home wired (prox-PNP)L14 ..................- EOT only wired (prox-PNP)L15 ................- Home only wired (prox-PNP)
225130
13570
180
100
Rotary Encoders
E01 ......................................... $ 600- 500 lines/revE02 ....................................... $ 600- 1000 lines/revE03 ....................................... $ 600- 1270 lines/rev
Power-off Brakes
B01 ................................................. $ 525- 24 VDCB02 ................................................. $ 525- 90 VDC
P.O.R. - Price On RequestNC - No Charge
Options 100 Series- Screw Drive -
100-CP0 Series* screw drive
* without cover plates
* 4 inch carriage
100-CP1 Series* screw drive
* with top cover plate only
* 4 inch carriage
* without motor coupling cover
100-CP2 Series* screw drive
* with top & side cover plates
* 4 inch carriage
* with motor coupling cover
$ 85
CP1
90 95
100 105
110115 120125
130 135140 145150
(1) The -CP2 option is NOT available with any Linear Encoder option.
(1) (1)
P.O.R.P.O.R.
P.O.R.P.O.R.
P.O.R.P.O.R.
P.O.R.P.O.R.
P.O.R.P.O.R.
P.O.R.P.O.R.P.O.R.
P.O.R.
$ 170$ 135$ 120
$ 200$ 150$ 130
$ 370$ 275$ 195
$ 375$ 285$ 185
$ 375$ 285$ 185
13
Power Supplies
part # 41970 ... $ 150- 5 VDC (120/240 VAC input)part # 37488 . $ 150- 24 VDC (120/240 VAC input)part # 37489 ........ $ 165- 90 VDC (120 VAC input)part # 37490 ........ $ 165- 90 VDC (240 VAC input)
Carriage Adapter Plates
............part # 43551 - English mount (regular)
part # 202297 - Metric mount (regular) .......................part # 44384 - English mount (extended)
part # 202298 - Metric mount (extended) ...........
$ $ $ $
65
215100180
P.O.R. - Price On RequestNC - No Charge
Options 100 Series- Screw Drive -
Travel Length
SCREW Price - Additional Price Per Axis
2 thru 12(50) thru (300)
Rolled Ball Screws
S001 S002 S003 S005 S010S006 S007 S009 S011inches(mm)
Precision Ball Screws
S114 S115 S116 S117 S121S118 S119 S120
Rolled Acme Screws
S300 S301 S302 S303 S304 S305
Ground Ball Screws
S212 S213 S214 S215
16 thru 30(405) thru (760)
36 thru 60(910) thru (1520)
Travel Length
2 thru 12(50) thru (300)
inches(mm)
16 thru 30(405) thru (760)
36 thru 60(910) thru (1520)
Travel Length
2 thru 6(50) thru (150)
inches(mm)
8 thru 16(200) thru (405)
Travel Length
2 thru 12(50) thru (300)
inches(mm)
16 thru 30(405) thru (760)
36 thru 60(910) thru (1520)
20 thru 36(505) thru (910)
(1)
(1) Not available in a 2 inch (50 mm) travel.
S012S008S004
S223
Chrome Plated Linear Rails, Screw & Nut ... P.O.R.
Multiple Axis Angle Brackets
Multiple Axis Mounting Charges
X-Y system with NO Bracket or Plate .............X-Y or X-Z system with Bracket or Plate ........X-Y-Z system with Bracket or Plate ................
.........part # 43291 - English mount (horizontal)
part # 202295 - Metric mount (horizontal) .......................part # 43292 - English mount (vertical)
part # 202296 - Metric mount (vertical) ..............
$ $ $ $
$ $ $
100140200
310
395310395
Note: The above multiple axis mounting charges DO NOT include the adapter plate, or angle bracket. If required, an adapter plate or angle bracket, needs to be ordered separately.
$1,003
1,300
1,685
$1,003
1,300
1,685
$1,227
1,612
2,064
$ 166
219
271
$ 297
347
399
$ 180
256
329
$ 354
426
497
P.O.R.
P.O.R.
P.O.R.
P.O.R.
P.O.R.
P.O.R.
$ 229
303
377
$ 478
551
626
$ 260
323
386
$ 558
621
683
$ 342
435
527
$ 665
756
849
$ 310
421
533
$ 645
757
869
$ 391
454
518
$ 818
885
982
$ 99
162
225
$ 124
149
175
$ 318
343
369
$ 813
940
1,071
$1,530
1,705
1,837
$ 224
356
488
NC
NC
NC
$ 387
520
645
$ 150
150
150
$ 225
286
357
P.O.R.
P.O.R.
P.O.R.
P.O.R.
P.O.R.
P.O.R.
14
Ordering Guide 110 Series- Screw Drive -
Table Series
Number of Bearings
Carriage Length
Travel Length
Waycovers
Screw Options
Limit & Home Switches
Coupling Options
Encoder Options
Power-off Brakes
WC1 - with waycovers
2 - 2 bearings per carriage 4 - 4 bearings per carriage
4 - 4 inches
01 - 1 to 45 inches
other
S001 -S002 -
C000 - none
E00 - none E01 - rotary (500 lines/rev)
E02 - rotary (1000 lines/rev) E03 - rotary (1270 lines/rev)
E10 - linear (2500 lines/inch) E99 - other
B00 - none B01 - 24 VDC B02 - 90 VDC B99 - other
Rolled ball screws.500 x .500 NPL.500 x .500 PL
- .625 x .200 NPL-----
Precision ball screws
.625 x .200 PL16 x 5 NPL16 x 5 PL16 x 10 NPL16 x 10 PL
C020 to C024 - C100 C040 to C047 - C125
C125 to C129 - H100 C145 to C154 - H131
C400 to C406 - G100 C425 to C434 - G126 C999 - other
EOT switches only EOT & home switches
L00 - no switches
home switch only
Mechanical Reed HallL01 L02 L03
L04 L05 L06
L07 L08 L09
L10 L11 L12
Prox (NPN)L99 - other
E11 - linear (250 lines/mm)
M02 C145 ---- B00E00- 101 - L01-- WC14411
Carriage Inserts1 - English mount 2 - Metric mount
S003 - .500 x .500 NPL(T)
- .625 x .200 PL
--
Ground ball screws
16 x 5 PL 16 x 16 PL
.625 x .100 NPL Rolled acme screws
.625 x .100 PL
.625 x .200 NPL
.625 x .200 PL
--
16 x 16 NPL16 x 16 PL
Motor MountM00 - none M01 - hand crank
M02 - NEMA 23 mount (E)
M04 - NEMA 34 mount (E) M07 -
M09 -
NEMA 23 (LH) wrap
M99 - NEMA 34 (LH) wrap
M06 - NEMA 23 (RH) wrap
M08 - NEMA 34 (RH) wrap M03 - NEMA 23 mount (M)
M05 - NEMA 34 mount (M)
S999 - other
S117 S118
S114 S115
S120 S121
S119
S116
S212
S214 S215
- .625 x .500 PL S213
-
--
S300
S302 S303
-S301
16 x 4 NPL16 x 4 PL
--
S304 S305
S114
L13 L14 L15
Prox (PNP)
S005 - .625 x .200 NPLS006 -
S009 -S010 -
.625 x .200 PL
.625 x 1.000 NPL
.625 x 1.000 PL
S007 - .625 x .200 NPL(T)
S011 - .625 x 1.000 NPL(T)
S004 - .500 x .500 PL(T)
S008 - .625 x .200 PL(T)
S012 - .625 x 1.000 PL(T)
(E) - English Interface(LH) - Left Hand(M) - Metric Interface
(NPL) - Non Preloaded(PL) - Preloaded(RH) - Right Hand(T) - Turcite Nut
- 16 x 10 PL S223
15
Pricing Example: 112404-WC1-2-S212-M06-C000-L07-E02-B00 for Top (Y) axis114428-WC1-2-S212-M06-C000-L07-E02-B00 for Bottom (X) axisMounted in an X-Y configuration using an extended adapter plate “202298”
112404-WC1-2-S212-M06-C000-L07-E02-B00
=========
$ 1,7190
1001,003
3000
370600
0
G100-312-250G100-312-375G100-312-500G100-312-006G100-312-008G100-312-010G100-312-012
C400C401C402C403C404C405C406
G126-312-250G126-312-375G126-312-500G126-312-625G126-312-006G126-312-008G126-312-010G126-312-012G126-312-014G126-312-016
C425C426C427C428C429C430C431C432C433C434
C100-312-250C100-312-375C100-312-006C100-312-008C100-312-010
C020C021C022C023C024
C125-312-250C125-312-375C125-312-500C125-312-006C125-312-008C125-312-010C125-312-012C125-312-014
C040C041C042C043C044C045C046C047
H100-312-250H100-312-375H100-312-006H100-312-008H100-312-010
C125C126C127C128C129
H131-312-250H131-312-375H131-312-500H131-312-625H131-312-006H131-312-008H131-312-010H131-312-012H131-312-014H131-312-016
C145C146C147C148C149C150C151C152C153C154
114428-WC1-2-S212-M06-C000-L07-E02-B00
=========
$ 4,2080
1001,685
3000
370600
0
$ 4,092
$ 7,263
202298 adapter plateMounting Charge
==
$ 215140
$ 355
Coupling Part Numbers
Options 110 Series- Screw Drive -
Note: Coupling style C125 & H131 can not be used with the NEMA 23 motor mounts (M02 & M03) because of the coupling length. The NEMA 34 motor mounts (M04 & M05), or a custom motor mount is required.
16
110-WC1 Series* screw drive
* with waycovers* 4 inch carriage
1.02.54.05.58.5
Travel Length
inches
11.514.317.322.0
28.031.736.340.745.5
Linear EncodersModel #
112401-WC1112402-WC1112404-WC1112405-WC1112408-WC1
112411-WC1112414-WC1112417-WC1112422-WC1
112428-WC1112431-WC1112436-WC1112440-WC1112445-WC1
Price2 bearingSystem
Model #
114401-WC1114402-WC1114404-WC1114405-WC1114408-WC1
114411-WC1114414-WC1114417-WC1114422-WC1
114428-WC1114431-WC1114436-WC1114440-WC1114445-WC1
Price4 bearingSystem E10 or E11(mm)
(25)
(63)
(100)
(140)
(215)
(290)
(360)
(435)
(558)
(710)
(1155)
(1030)
(920)
(805)
$ 1,4401,4981,7191,7992,089
2,4072,7212,9853,429
4,0684,5985,0865,3895,842
$ 1,5801,6381,8591,9392,229
2,5472,8613,1253,569
4,2084,7385,2265,5295,982
Motor Mounts
M01 ........................................... $ - Hand crankM02 ............................. $ - NEMA 23 mount (E)M03 ............................. $ - NEMA 23 mount (M)M04 ............................. $ - NEMA 34 mount (E)M05 ............................. $ - NEMA 34 mount (M)M06 ........... $ 300- NEMA 23 right hand (RH) wrapM07 .............. $ 300- NEMA 23 left hand (LH) wrapM08 ............ $ 540- NEMA 34 right hand (RH) wrapM09 .............. $ 540- NEMA 34 left hand (LH) wrap
Coupling Options
........................... $ 80C020 to - C100 style C024
........................... $ 105C040 to - C125 style C047
........................... $ 65C125 to - H100 style C129
........................... $ 85C145 to - H131 style C154
........................... $ 110C400 to - G100 style C406
........................... $ 140C425 to - G126 style C434
M99 ............................. P.O.R.- Other motor mounts
Rotary Encoders
E01 ......................................... $ 600- 500 lines/revE02 ....................................... $ 600- 1000 lines/revE03 ....................................... $ 600- 1270 lines/rev
Power-off Brakes
B01 ................................................. $ 525- 24 VDCB02 ................................................. $ 525- 90 VDC
Carriage Inserts
1 ....................................... $ NC- English Mount
Limit & Home Switches
L01 ..........- EOT & home wired (mechanical)L02 ................- EOT only wired (mechanical)L03 ..............- Home only wired (mechanical)
2 ......................................... $ - Metric Mount
L04 ....................- EOT & home wired (reed)L05 ..........................- EOT only wired (reed)L06 ........................- Home only wired (reed)
L07 ......................- EOT & home wired (hall)L08 ............................- EOT only wired (hall)L09 ..........................- Home only wired (hall)
L10 ............- EOT & home wired (prox-NPN)L11 ..................- EOT only wired (prox-NPN)L12 ................- Home only wired (prox-NPN)
L13 ............- EOT & home wired (prox-PNP)L14 ..................- EOT only wired (prox-PNP)L15 ................- Home only wired (prox-PNP)
225130
13570
180
100
P.O.R. - Price On RequestNC - No Charge
Options 110 Series- Screw Drive -
P.O.R.P.O.R.
P.O.R.P.O.R.
P.O.R.P.O.R.
P.O.R.P.O.R.
P.O.R.P.O.R.
P.O.R.P.O.R.P.O.R.
P.O.R.
$ 170$ 135$ 120
$ 200$ 150$ 130
$ 370$ 275$ 195
$ 375$ 285$ 185
$ 375$ 285$ 185
17
Power Supplies
part # 41970 ... $ 150- 5 VDC (120/240 VAC input)part # 37488 . $ 150- 24 VDC (120/240 VAC input)part # 37489 ........ $ 165- 90 VDC (120 VAC input)part # 37490 ........ $ 165- 90 VDC (240 VAC input)
Carriage Adapter Plates
.........part # 44384 - English mount (extended)
part # 202298 - Metric mount (extended) ...........$ $ 215
100
P.O.R. - Price On RequestNC - No Charge
Options 110 Series- Screw Drive -
Travel Length
SCREW Price - Additional Price Per Axis
Rolled Ball Screws
S001 S002 S003 S005 S010S006 S007 S009 S011inches(mm)
Precision Ball Screws
S114 S115 S116 S117 S121S118 S119 S120
Rolled Acme Screws
S300 S301 S302 S303 S304 S305
Ground Ball Screws
S212 S213 S214 S215
Travel Lengthinches(mm)
Travel Lengthinches(mm)
Travel Lengthinches(mm)
(1)
(1) Not available in a 1 inch (25 mm) travel.
S012S008S004
1 thru 8.5(25) thru (215)
11.5 thru 22(290) thru (558)
28 thru 45.5(710) thru (1155)
1 thru 8.5(25) thru (215)
11.5 thru 22(290) thru (558)
28 thru 45.5(710) thru (1155)
1 thru 8.5(25) thru (215)
11.5 thru 22(290) thru (558)
28 thru 45.5(710) thru (1155)
1 thru 4(25) thru (100)
5.5 thru 11.5(135) thru (290)
14.3 thru 28(365) thru (710)
Chrome Plated Linear Rails, Screw & Nut ... P.O.R.
Multiple Axis Mounting Charges
X-Y system with NO Plate ..............................X-Y system with Plate .....................................
$ $
100140
Note: The above multiple axis mounting charges DO NOT include the adapter plate. If required, an adapter plate needs to be ordered separately.
S223
$1,003
1,300
1,685
$1,003
1,300
1,685
$1,227
1,612
2,064
$ 166
219
271
$ 297
347
399
$ 180
256
329
$ 354
426
497
P.O.R.
P.O.R.
P.O.R.
P.O.R.
P.O.R.
P.O.R.
$ 229
303
377
$ 478
551
626
$ 260
323
386
$ 558
621
683
$ 342
435
527
$ 665
756
849
$ 310
421
533
$ 645
757
869
$ 391
454
518
$ 818
885
982
$ 99
162
225
$ 124
149
175
$ 318
343
369
$ 813
940
1,071
$1,530
1,705
1,837
$ 224
356
488
NC
NC
NC
$ 387
520
645
$ 150
150
150
$ 225
286
357
P.O.R.
P.O.R.
P.O.R.
P.O.R.
P.O.R.
P.O.R.
18
Ordering Guide 120 Series- Belt Drive -
Table Series
Carriage Length
Travel Length
Drive Shaft
D2
Motor Mount
-D1 - Right Hand single shaft
4 - 4 inches
004 - 4 to 120 inches
M00 - none M02 -M03 - NEMA 23 mount (M)
NEMA 23 mount (E)
Limit & Home Switches
Coupling Options
Encoder Options
Power-off Brakes
C000 - none
L00 - no switches
C130 to C134 - H100 C155 to C164 - H131
C407 to C413 - G100 C435 to C444 - G126 C470 to C480 - G158
L99 - other
M99 - other
C999 - none
note: When selecting any rotary encoder option, the Drive Shaft D3 or D4 above is required.
note: When selecting any brake option, the Drive Shaft D3 or D4 above is required.B00 - none B01 - 24 VDC B02 - 90 VDC B99 - other
E00 - none E01 - rotary (500 lines/rev)
E02 - rotary (1000 lines/rev) E03 - rotary (1270 lines/rev)
E99 - other
M02 C155 ---- B00E00D1 - L04-
M04 -M05 - NEMA 34 mount (M)
NEMA 34 mount (E)
(E) - English Interface(M) - Metric Interface
Left Hand single shaft D4 -D3 - Right Hand thru shaft
Left Hand thru shaft
EOT switches only EOT & home switches
home switch only
Reed HallL04 L05 L06
L07 L08 L09
L10 L11 L12
Prox (NPN)L13 L14 L15
Prox (PNP)
- 1- CP14412
Number of Bearings2 - 2 bearings per carriage 4 - 4 bearings per carriage
004
Cover PlateCP1 - top cover plate onlyCP0 - no cover plate
Carriage Inserts1 - English mount 2 - Metric mount
C190 to C200 - H163
19
H100-375-250H100-375-375H100-375-006H100-375-008H100-375-010
C130C131C132C133C134
H163-375-375H163-375-500H163-375-625H163-375-750H163-375-010H163-375-012H163-375-014H163-375-016H163-375-018H163-375-019H163-375-020
C190C191C192C193C194C195C196C197C198C199C200
C407C408C409C410C411C412C413
G100-375-250G100-375-375G100-375-500G100-375-006G100-375-008G100-375-010G100-375-012
C435C436C437C438C439C440C441C442C443C444
G126-375-250G126-375-375G126-375-500G126-375-625G126-375-006G126-375-008G126-375-010G126-375-012G126-375-014G126-375-016
C470C471C472C473C474C475C476C477C478C479C480
G158-375-375G158-375-500G158-375-625G158-375-750G158-375-010G158-375-012G158-375-014G158-375-016G158-375-018G158-375-019G158-375-020
Pricing Example: 1244048-CP1-1-D3-M02-C155-L10-E00-B02 for Top (Y) axis1244072-CP1-1-D3-M02-C155-L10-E00-B00 for Bottom (X) axis Master1244072-CP1-1-D3-M00-C000-L00-E00-B02 for Bottom (X) axis Slave
1244048-CP1-1-D3-M02-C155-L10-E00-B02
=========
$ 2,745140
035
13085
3750
525$ 4,035
Qty 2 (part #44192)Qty 2 (part # C191)Qty 2 (part #43551)47.5 inch cross shaft
====
$ 130200130
71
$ 531
1244072-CP1-1-D3-M02-C155-L10-E00-B00
=========
$ 3,645160
035
13085
37500
$ 4,4301244072-CP1-1-D3-M00-C000-L00-E00-B02
=========
$ 3,645160
035
0000
525$ 4,365
H131-375-250H131-375-375H131-375-500H131-375-625H131-375-006H131-375-008H131-375-010H131-375-012H131-375-014H131-375-016
C155C156C157C158C159C160C161C162C163C164
Note: Coupling style H163 & G158 can not be used with the NEMA 23 or NEMA 34 motor mounts (M02, M03, M04, & M05) because of the coupling length & diameter. No motor mount, or a custom motor mount is required.
Coupling Part Numbers
Options 120 Series- Belt Drive -
20
120-CP1 Series* belt drive
* with top cover plate* 4 inch carriage
468
12
Travel Length
inches
16
2024303642
485460
Model #
12240041224006122400812240121224016
12240201224024122403012240361224042
1224048122405412240601224072
Price2 bearing System
12440041244006124400812440121244016
12440201244024124403012440361244042
1244048124405412440601244072
(mm)
(100)
(150)
(200)
(300)
(405)
(505)
(605)
(760)
(910)
(1520)
(1370)
(1215)
(1060)
1224084
122409612241081224120
1244084
124409612441081244120
7284 (2130)
(1825)
96 (2435)
108120 (3045)
(2740)
Model #
GIL23-03
Gearhead Price
GIL34-03
GRA23-02GRA23-03
GRA34-02GRA34-03
GRA23-01
GRA34-01
$ 1,3451,4051,4601,5501,830
1,8801,9652,0502,2102,490
2,6052,8203,1803,5055,305
5,7355,9357,160
$ 1,4851,5451,6001,6901,970
2,0202,1052,1902,3502,630
2,7452,9603,3203,6455,445
5,8756,0757,300
P.O.R. - Price On Request
NC - No Charge
Options 120 Series- Belt Drive -
For travels greater than 72 inches a top cover plate CAN NOT be used. This is due to the cover plate weight, which causes excess deflection at mid stroke.
Cover Plate Options
NC
CP0
NCNCNCNC
NCNCNCNCNC
NCNCNCNC
$ 90
CP1
95 100 105 110
115 120 125 130 135
140 145 150
NC
NCNCNC
NA
NANANA
Model # Price4 bearing System
160
NA - Not Available
(1)
(1)
(1)
(1)
(1)
CP2
$ 310
520
325340 355 370
385400415 430445
460 475 490
375
415395
435
(1)
(1)
(1)
(1)
P.O.R.
P.O.R.
P.O.R.P.O.R.P.O.R.
P.O.R.P.O.R.P.O.R.
21
Coupling Options
........................... $ 65C130 to - H100 style C134
........................... $ 85C155 to - H131 style C164
........................... $ 100C190 to - H163 style C200
........................... $ 110C407 to - G100 style C413
........................... $ 140C435 to - G126 style C444
........................... $ 175C470 to - G158 style C480
Rotary Encoders
E01 ......................................... $ 600- 500 lines/revE02 ....................................... $ 600- 1000 lines/revE03 ....................................... $ 600- 1270 lines/rev
Power-off Brakes
B01 ................................................. $ 525- 24 VDCB02 ................................................. $ 525- 90 VDC
Power Supplies
part # 41970 ... $ 150- 5 VDC (120/240 VAC input)part # 37488 . $ 150- 24 VDC (120/240 VAC input)part # 37489 ........ $ 165- 90 VDC (120 VAC input)part # 37490 ........ $ 165- 90 VDC (240 VAC input)
Carriage Inserts
1 ....................................... $ NC- English Mount
Limit & Home Switches
Multiple Axis Mounting Charges
X-Y system with NO Bracket or Plate .............X-Y or X-Z system with Bracket or Plate ........X-Y-Z system with Bracket or Plate ................
2 ......................................... $ - Metric Mount
L04 .................... $ 200- EOT & home wired (reed)L05 .......................... $ 150- EOT only wired (reed)L06 ........................ $ 130- Home only wired (reed)
L07 ...................... $ 370- EOT & home wired (hall)L08 ............................ $ 275- EOT only wired (hall)L09 .......................... $ 195- Home only wired (hall)
L10 ............ $ 375- EOT & home wired (prox-NPN)L11 .................. $ 285- EOT only wired (prox-NPN)L12 ................ $ 185- Home only wired (prox-NPN)
L13 ............ $ 375- EOT & home wired (prox-PNP)L14 .................. $ 285- EOT only wired (prox-PNP)L15 ................ $ 185- Home only wired (prox-PNP)
$ $ $
100140200
Motor Mounts
M02 ............................. $ - NEMA 23 mount (E)M03 ............................. $ - NEMA 23 mount (M)M04 ............................. $ - NEMA 34 mount (E)M05 ............................. $ - NEMA 34 mount (M)M99 ............................. P.O.R.- Other motor mounts
Drive Shaft
D1 or D2 ....... $ NC- Right or left hand single shaft$ D3 or D4 ..........- Right or left hand thru shaft
Cross Shaft ........................................ $ 1.50 per inch .............part # 44192 - Cross Shaft Support $ 65
100
35
130
260160220
Carriage Adapter Plates
............
Multiple Axis Angle Brackets
part # 43551 - English mount (regular)
part # 202297 - Metric mount (regular) .......................part # 44384 - English mount (extended)
part # 202298 - Metric mount (extended) ...........
$ $ $ $
.........part # 43291 - English mount (horizontal)
part # 202295 - Metric mount (horizontal) .......................part # 43292 - English mount (vertical)
part # 202296 - Metric mount (vertical) ..............
$ $ $ $
65
215100180
310
395310395
Chrome Plated Linear Rails .......................... P.O.R.
Note: The above multiple axis mounting charges DO NOT include the adapter plate, or angle bracket. If required, an adapter plate or angle bracket, needs to be ordered separately.
P.O.R. - Price On RequestNC - No Charge
Options 120 Series- Belt Drive -
22
Ordering Guide 90 Series- Screw Drive -
Table Series
Waycovers
Screw Options
Limit & Home Switches
Coupling Options
Encoder Options
Power-off Brakes
WC0 - with no waycovers
6 inches
06 - 6 to 60 inches
other
S005 - .625 x .200 NPLS006 -
S013 -S014 -
S009 -S010 -
C000 - none
E00 - none E01 - rotary (500 lines/rev)
E02 - rotary (1000 lines/rev) E03 - rotary (1270 lines/rev)
E10 - linear (2500 lines/inch) E99 - other
B00 - none B01 - 24 VDC B02 - 90 VDC B99 - other
Rolled ball screws
.625 x .200 PL
.750 x .200 NPL
.750 x .200 PL
.625 x 1.000 NPL
.625 x 1.000 PL
C025 to C029 - C100 C048 to C055 - C125
C130 to C134 - H100 C155 to C164 - H131
C407 to C413 - G100 C435 to C444 - G126 C999 - other
EOT switches only EOT & home switches
L00 - no switches
home switch only
Mechanical Reed HallL01 L02 L03
L04 L05 L06
L07 L08 L09
L10 L11 L12
Prox (NPN)L99 - other
E11 - linear (250 lines/mm)
M02 C155 ---- B00E00- 106 - L01-- WC09
1 - English mount 2 - Metric mount
S007 - .625 x .200 NPL(T)
S015 - .750 x .200 NPL(T)
S011 - .625 x 1.000 NPL(T)
- .625 x .200 PL
--
Ground ball screws
16 x 5 PL 16 x 16 PL
.625 x .100 NPL Rolled acme screws
.625 x .100 PL
.625 x .200 NPL
.625 x .200 PL
Motor MountM00 - none M01 - hand crank
M02 - NEMA 23 mount (E)
M04 - NEMA 34 mount (E)
M07 -
M09 -
NEMA 23 (LH) wrap
M99 -NEMA 34 (LH) wrap
M06 - NEMA 23 (RH) wrap
M08 - NEMA 34 (RH) wrap M03 - NEMA 23 mount (M)
M05 - NEMA 34 mount (M)
S999 - other
(E) - English Interface(LH) - Left Hand(M) - Metric Interface
(NPL) - Non Preloaded(PL) - Preloaded(RH) - Right Hand(T) - Turcite Nut
S212
S214 S215
- .625 x .500 PL S213 -
--
S300
S302 S303
-S301
S005
L13 L14 L15
Prox (PNP)
06
06 - 12 inches 12 -
WC1 - with waycovers
S017 -S018 -
.750 x .500 NPL
.750 x .500 PLS019 - .750 x .500 NPL(T)
S021 -S022 -
1.000 x .250 NPL1.000 x .250 PL
S023 - 1.000 x .250 NPL(T)
- .625 x .200 NPL-----
Precision ball screws
.625 x .200 PL16 x 5 NPL16 x 5 PL16 x 10 NPL16 x 10 PL
--
16 x 16 NPL16 x 16 PL
S117 S118
S114 S115
S120 S121
S119
S116
- .750 x .200 NPL-----
.750 x .200 PL20 x 5 NPL20 x 5 PL20 x 20 NPL20 x 20 PL
S125 S128
S122 S123
S129
S124
S026 - 1.000 x .500 PLS027 -
S030 -S031 -
Rolled ball screws
1.000 x .500 NPL(T)
1.000 x 1.000 PL1.000 x 1.000 NPL(T)
S029 - 1.000 x 1.000 NPL
S025 - 1.000 x .500 NPL
M13 - NEMA 42 (LH) wrap M12 - NEMA 42 (RH) wrap
Travel Length
Carriage Length
Carriage Inserts
S008 - .625 x .200 PL(T)
S012 - .625 x 1.000 PL(T)
S016 - .750 x .200 PL(T)
S020 - .750 x .500 PL(T)
S024 - 1.000 x .250 PL(T)
S028 - 1.000 x .500 PL(T)
S032 - 1.000 x 1.000 PL(T)
- 16 x 10 PL S223
23
Pricing Example: 90612-WC0-2-S117-M03-C407-L10-E00-B00 for Top (Y) axis90648-WC0-2-S117-M05-C435-L10-E00-B00 for Bottom (X) axisMounted in an X-Y configuration
90612-WC0-2-S117-M03-C407-L10-E00-B00
========
$ 1,333160692225110375
00
G100-375-250G100-375-375G100-375-500G100-375-006G100-375-008G100-375-010G100-375-012
C407C408C409C410C411C412C413
G126-375-250G126-375-375G126-375-500G126-375-625G126-375-006G126-375-008G126-375-010G126-375-012G126-375-014G126-375-016
C435C436C437C438C439C440C441C442C443C444
C100-375-250C100-375-375C100-375-006C100-375-008C100-375-010
C025C026C027C028C029
C125-375-250C125-375-375C125-375-500C125-375-006C125-375-008C125-375-010C125-375-012C125-375-014
C048C049C050C051C052C053C054C055
H100-375-250H100-375-375H100-375-006H100-375-008H100-375-010
C130C131C132C133C134
H131-375-250H131-375-375H131-375-500H131-375-625H131-375-006H131-375-008H131-375-010H131-375-012H131-375-014H131-375-016
C155C156C157C158C159C160C161C162C163C164
90648-WC0-2-S117-M05-C435-L10-E00-B00
========
$ 2,168160818270140375
00
$ 2,895
$ 3,931
Mounting Charge = $ 175
$ 175
Coupling Part Numbers
Options 90 Series- Screw Drive -
24
90-WC0 Series* screw drive
* without waycovers* 6 & 12 inch carriage
4.79.7
14.819.824.9
Travel Length
inches
29.940.250.2
4.79.7
14.819.824.929.9
Model #
90606-WC090612-WC090618-WC090624-WC090630-WC090636-WC090648-WC090660-WC0
91206-WC091212-WC091218-WC091224-WC091230-WC091236-WC0
Price Price
(mm)
(119)
(246)
(375)
(502)
(632)
(759)
(1021)
(1275)
(119)
(246)
(759)
(632)
(502)
(375)
40.250.2
91248-WC091260-WC0 (1275)
(1021)
90-WC1 Series* screw drive
* with waycovers* 6 & 12 inch carriage
612182430
Travel Length
inches
364860
61218243036
(mm)
(150)
(300)
(455)
(605)
(760)
(910)
(1215)
(1520)
(150)
(300)
(910)
(760)
(605)
(455)
4860 (1520)
(1215)
Motor Mounts
M01 ........................................... $ - Hand crankM02 ............................. $ - NEMA 23 mount (E)M03 ............................. $ - NEMA 23 mount (M)M04 ............................. $ - NEMA 34 mount (E)M05 ............................. $ - NEMA 34 mount (M)M06 ........... $ 300- NEMA 23 right hand (RH) wrapM07 .............. $ 300- NEMA 23 left hand (LH) wrapM08 ............ $ 475- NEMA 34 right hand (RH) wrapM09 .............. $ 475- NEMA 34 left hand (LH) wrap
Coupling Options
........................... $ 80C025 to - C100 style C029
........................... $ 105C048 to - C125 style C055
........................... $ 65C130 to - H100 style C134
........................... $ 85C155 to - H131 style C164
........................... $ 110C407 to - G100 style C413
........................... $ 140C435 to - G126 style C444
M99 ............................. P.O.R.- Other motor mounts
Carriage Inserts
1 ....................................... $ NC- English Mount 2 ......................................... $ - Metric Mount
270160
135105225
160
Limit & Home Switches
L01 .......... $ 170- EOT & home wired (mechanical)L02 ................ $ 135- EOT only wired (mechanical)L03 .............. $ 120- Home only wired (mechanical)
L04 .................... $ 200- EOT & home wired (reed)L05 .......................... $ 150- EOT only wired (reed)L06 ........................ $ 130- Home only wired (reed)
L07 ...................... $ 370- EOT & home wired (hall)L08 ............................ $ 275- EOT only wired (hall)L09 .......................... $ 195- Home only wired (hall)
L10 ............ $ 375- EOT & home wired (prox-NPN)L11 .................. $ 285- EOT only wired (prox-NPN)L12 ................ $ 185- Home only wired (prox-NPN)
L13 ............ $ 375- EOT & home wired (prox-PNP)L14 .................. $ 285- EOT only wired (prox-PNP)L15 ................ $ 185- Home only wired (prox-PNP)
Rotary Encoders
E01 ......................................... $ 600- 500 lines/revE02 ....................................... $ 600- 1000 lines/revE03 ....................................... $ 600- 1270 lines/rev
Power-off Brakes
B01 ................................................. $ 525- 24 VDCB02 ................................................. $ 525- 90 VDC
M12 ............ $ 640- NEMA 42 right hand (RH) wrapM13 .............. $ 640- NEMA 42 left hand (LH) wrap
90604-WC190609-WC190614-WC190619-WC190624-WC190629-WC190640-WC190650-WC1
91204-WC191209-WC191214-WC191219-WC191224-WC191229-WC191240-WC191250-WC1
Model #
Options 90 Series- Screw Drive -
$ 1,2151,3331,3751,8431,8742,0292,1682,343
1,4051,4981,8281,8742,0292,1832,4202,729
$ 1,8522,2992,6173,2913,6464,1474,7816,163
2,0422,4583,0703,3223,7954,2885,0286,549
Linear Encoders
E10 or E11
GroundScrewCode
112233
NANA
12233
NANANA
P.O.R. - Price On RequestNA - Not Available NC - No Charge
P.O.R.P.O.R.
P.O.R.P.O.R.P.O.R.
P.O.R.P.O.R.
P.O.R.
P.O.R.P.O.R.
P.O.R.P.O.R.P.O.R.
P.O.R.P.O.R.
P.O.R.
25
Travel Length
SCREW Price - Additional Price Per Axis
6 thru 12(150) thru (300)
Rolled Ball Screws
S005 S006 S007 S009 S014S010 S011 S013 S015inches(mm)
18 thru 30(455) thru (760)
36 thru 60(910) thru (1520)
S017
4.7 thru 9.7(119) thru (246)
14.8 thru 24.9(375) thru (632)
29.9 thru 50.2(759) thru (1275)
inches(mm)
90-WC0 90-WC1
Travel Length
6 thru 12(150) thru (300)
Rolled Ball Screws
S019 S021 S022
S027
S023 S025 S026
S029
inches(mm)
18 thru 30(455) thru (760)
36 thru 60(910) thru (1520)
S030
4.7 thru 9.7(119) thru (246)
14.8 thru 24.9(375) thru (632)
29.9 thru 50.2(759) thru (1275)
inches(mm)
90-WC0 90-WC1
S031
Travel Length
6 thru 12(150) thru (300)
Precision Ball Screws
S114 S115 S116 S117 S121S118 S119 S120 S122inches(mm)
18 thru 30(455) thru (760)
36 thru 60(910) thru (1520)
S123
4.7 thru 9.7(119) thru (246)
14.8 thru 24.9(375) thru (632)
29.9 thru 50.2(759) thru (1275)
inches(mm)
90-WC0 90-WC1
Travel Length
6 thru 12(150) thru (300)
Precision Ball Screws
S124 S125 S128 S129inches(mm)
18 thru 30(455) thru (760)
36 thru 60(910) thru (1520)
4.7 thru 9.7(119) thru (246)
14.8 thru 24.9(375) thru (632)
29.9 thru 50.2(759) thru (1275)
inches(mm)
90-WC0 90-WC1
Ground Ball Screws
S212 S213 S214 S215
Options 90 Series- Screw Drive -
$ 80
106
132
$ 279
305
331
NC
NC
NC
$ 876
1,040
1,290
$1,609
1,772
2,023
$ 279
412
557
$ 562
644
756
$1,121
1,201
1,314
$ 226
262
305
$ 606
724
876
$ 224
262
305
$ 688
776
881
$1,364
1,451
1,558
$ 218
305
380
$ 688
776
881
$1,364
1,453
1,558
$ 218
305
380
$ 688
776
881
$ 218
305
380
$1,364
1,451
1,558
$ 247
322
390
$ 514
588
656
$ 322
383
444
$ 692
755
818
$ 366
451
569
$ 724
811
935
$ 395
464
557
$ 831
896
991
$ 923
1,015
1,096
$ 520
613
693
$ 927
1,020
1,097
$ 524
613
696
$ 589
701
872
$1,168
1,281
1,451
$1,222
1,769
2,373
$1,222
1,769
2,373
Travel Length
6 thru 12(150) thru (300)
Rolled Ball Screwsinches(mm)
18 thru 30(455) thru (760)
36 thru 60(910) thru (1520)
4.7 thru 9.7(119) thru (246)
14.8 thru 24.9(375) thru (632)
29.9 thru 50.2(759) thru (1275)
inches(mm)
90-WC0 90-WC1
S018
$1,170
1,290
1,439
S032
$ 567
657
731
S300 S301 S302 S303
$ 250
341
503
$ 443
533
694
$ 250
341
503
$ 443
533
694
S008
$ 218
218
218
S012
$ 500
625
750
S016
$ 445
479
525
S020
$ 445
479
525
S024
$ 567
657
731
S028
$ 567
657
731
Rolled Acme Screws
Power Supplies
part # 41970 ... $ 150- 5 VDC (120/240 VAC input)part # 37488 . $ 150- 24 VDC (120/240 VAC input)part # 37489 ........ $ 165- 90 VDC (120 VAC input)part # 37490 ........ $ 165- 90 VDC (240 VAC input)
Chrome Plated Linear Rails, Screw & Nut ... P.O.R.
P.O.R. - Price On RequestNC - No Charge
Multiple Axis Mounting Charges
X-Y system ......................................................X-Z system ......................................................
$
Note: The above X-Y multiple axis mounting charge con-sists of having extra threaded inserts placed in the bottom X axis carriage and then mounting the Y axis. For X-Z and X-Y-Z systems contact LINTECH for a custom price.
X-Y-Z system ..................................................
175P.O.R.P.O.R.
S223
$1,397
1,936
2,438
Ground ScrewCode
1
(See page 20)
2
3
P.O.R.
P.O.R.
P.O.R.
P.O.R.
P.O.R.
P.O.R.
26
Ordering Guide 160 Series- Screw Drive -
Table Series
Cover Plate
Screw Options
Limit & Home Switches
Coupling Options
Encoder Options
Power-off Brakes
CP0 - no cover plate
6 inches
06 - 6 to 60 inches
other
S005 - .625 x .200 NPLS006 -
S013 -S014 -
S009 -S010 -
C000 - none
E00 - none E01 - rotary (500 lines/rev)
E02 - rotary (1000 lines/rev) E03 - rotary (1270 lines/rev)
E10 - linear (2500 lines/inch) E99 - other
B00 - none B01 - 24 VDC B02 - 90 VDC B99 - other
Rolled ball screws
.625 x .200 PL
.750 x .200 NPL
.750 x .200 PL
.625 x 1.000 NPL
.625 x 1.000 PL
C025 to C029 - C100 C048 to C055 - C125
C130 to C134 - H100 C155 to C164 - H131
C407 to C413 - G100 C435 to C444 - G126 C999 - other
EOT switches only EOT & home switches
L00 - no switches
home switch only
Mechanical Reed HallL01 L02 L03
L04 L05 L06
L07 L08 L09
L10 L11 L12
Prox (NPN)L99 - other
E11 - linear (250 lines/mm)
M02 C155 ---- B00E00- 0 - L01-
S007 - .625 x .200 NPL(T)
S015 - .750 x .200 NPL(T)
S011 - .625 x 1.000 NPL(T)
Motor MountM00 - none M01 - hand crank
M02 - NEMA 23 mount (E)
M04 - NEMA 34 mount (E) M07 -
M09 -
NEMA 23 (LH) wrap
M99 - NEMA 34 (LH) wrap
M06 - NEMA 23 (RH) wrap
M08 - NEMA 34 (RH) wrap M03 - NEMA 23 mount (M)
M05 - NEMA 34 mount (M)
S999 - other
(E) - English Interface(LH) - Left Hand(M) - Metric Interface
(NPL) - Non Preloaded(PL) - Preloaded(RH) - Right Hand(T) - Turcite Nut
S005
L13 L14 L15
Prox (PNP)
6 -
S017 -S018 -
.750 x .500 NPL
.750 x .500 PLS019 - .750 x .500 NPL(T)
- .625 x .200 NPL-----
Precision ball screws
.625 x .200 PL16 x 5 NPL16 x 5 PL16 x 10 NPL16 x 10 PL
--
16 x 16 NPL16 x 16 PL
S117 S118
S114 S115
S120 S121
S119
S116
- .750 x .200 NPL-----
.750 x .200 PL20 x 5 NPL20 x 5 PL20 x 20 NPL20 x 20 PL
S125 S128
S122 S123
S129
S124
Travel Length
Carriage Length
Carriage Inserts
06 - CP06216
2 bearings 2 - 4 bearings4 -Number of Bearings
0 - T-slot mount
C470 to C480 - G158
- .625 x .200 PL
--
Ground ball screws
16 x 5 PL 16 x 16 PL
.625 x .100 NPL Rolled acme screws
.625 x .100 PL
.625 x .200 NPL
.625 x .200 PL
S212
S214 S215
- .625 x .500 PL S213
-
--
S300
S302 S303
-S301
Rolled ball screws
S016 - .750 x .200 PL(T)
S012 - .625 x 1.000 PL(T)
S008 - .625 x .200 PL(T) S020 - .750 x .500 PL(T)
- 16 x 10 PL S223
27
G100-375-250G100-375-375G100-375-500G100-375-006G100-375-008G100-375-010G100-375-012
C407C408C409C410C411C412C413
G126-375-250G126-375-375G126-375-500G126-375-625G126-375-006G126-375-008G126-375-010G126-375-012G126-375-014G126-375-016
C435C436C437C438C439C440C441C442C443C444
C100-375-250C100-375-375C100-375-006C100-375-008C100-375-010
C025C026C027C028C029
C125-375-250C125-375-375C125-375-500C125-375-006C125-375-008C125-375-010C125-375-012C125-375-014
C048C049C050C051C052C053C054C055
H100-375-250H100-375-375H100-375-006H100-375-008H100-375-010
C130C131C132C133C134
H131-375-250H131-375-375H131-375-500H131-375-625H131-375-006H131-375-008H131-375-010H131-375-012H131-375-014H131-375-016
C155C156C157C158C159C160C161C162C163C164
Coupling Part Numbers
Options 160 Series- Screw Drive -
G158-375-375G158-375-500G158-375-625G158-375-750G158-375-010G158-375-012G158-375-014G158-375-016G158-375-018G158-375-019G158-375-020
C470C471C472C473C474C475C476C477C478C479C480
Pricing Example: 164612-CP0-0-S117-M03-C407-L10-E00-B00 for Top (Y) axis164660-CP0-0-S117-M05-C436-L10-E00-B00 for Bottom (X) axis Mounted in an X-Y configuration
164612-CP0-0-S117-M03-C407-L10-E00-B00
========
$ 1,4500
692250110375
00
$ 2,877
164660-CP0-0-S117-M05-C436-L10-E00-B00
========
$ 2,8050
818320140375
00
$ 4,458
Mounting Charge = $ 150
$ 150
Note: Coupling style C125, H131, and G158 can not be used with the NEMA 23 motor mounts (M02 & M03) because of the cou-pling length. The NEMA 34 motor mounts (M04 & M05), or a custom motor mount is required.
28
160-CP0 Series* screw drive
* with T-Slot mounting* 5.5 inch carriage
Coupling Options
........................... $ 80C025 to - C100 style C029
........................... $ 105C048 to - C125 style C055
........................... $ 65C130 to - H100 style C134
........................... $ 85C155 to - H131 style C164
........................... $ 110C407 to - G100 style C413
........................... $ 140C435 to - G126 style C444
Carriage Inserts
P.O.R. - Price On RequestNC - No Charge
0 ................................................... $ NC- T-Slots
Motor Mounts
M01 ........................................... $ - Hand crankM02 ............................. $ - NEMA 23 mount (E)M03 ............................. $ - NEMA 23 mount (M)M04 ............................. $ - NEMA 34 mount (E)M05 ............................. $ - NEMA 34 mount (M)M06 ........... $ 350- NEMA 23 right hand (RH) wrapM07 .............. $ 350- NEMA 23 left hand (LH) wrapM08 ............ $ 500- NEMA 34 right hand (RH) wrapM09 .............. $ 500- NEMA 34 left hand (LH) wrapM99 ............................. P.O.R.- Other motor mounts
320200
135135250
Limit & Home Switches
L01 .......... $ 170- EOT & home wired (mechanical)L02 ................ $ 135- EOT only wired (mechanical)L03 .............. $ 120- Home only wired (mechanical)
L04 .................... $ 200- EOT & home wired (reed)L05 .......................... $ 150- EOT only wired (reed)L06 ........................ $ 130- Home only wired (reed)
L07 ...................... $ 370- EOT & home wired (hall)L08 ............................ $ 275- EOT only wired (hall)L09 .......................... $ 195- Home only wired (hall)
L10 ............ $ 375- EOT & home wired (prox-NPN)L11 .................. $ 285- EOT only wired (prox-NPN)L12 ................ $ 185- Home only wired (prox-NPN)
L13 ............ $ 375- EOT & home wired (prox-PNP)L14 .................. $ 285- EOT only wired (prox-PNP)L15 ................ $ 185- Home only wired (prox-PNP)
Rotary Encoders
E01 ......................................... $ 600- 500 lines/revE02 ....................................... $ 600- 1000 lines/revE03 ....................................... $ 600- 1270 lines/rev
Power-off Brakes
B01 ................................................. $ 525- 24 VDCB02 ................................................. $ 525- 90 VDC
Options 160 Series- Screw Drive -
........................... $ 175C470 to - G158 style C480
Carriage Fastener Rails
..........part # 201174 - Carriage Fastener Rail $ 22
$ 1,1151,2501,3201,4901,560
1,6501,820
2,2502,605
Linear EncodersModel #
162606-CP0162612-CP0162618-CP0162624-CP0162630-CP0
162636-CP0162642-CP0
162654-CP0162660-CP0
Price2 bearingSystem
Model #
164606-CP0164612-CP0164618-CP0164624-CP0164630-CP0
164636-CP0164642-CP0
164654-CP0164660-CP0
Price4 bearingSystem E10 or E11
612182430
Travel Length
inches
3642
5460
(mm)
(150)
(300)
(455)
(605)
(760)
(910)
(1060)
(1370)
(1520)
$ 1,3151,4501,5201,6901,760
1,8502,020
2,4502,805
P.O.R.P.O.R.
P.O.R.P.O.R.P.O.R.
P.O.R.P.O.R.
P.O.R.P.O.R.
1,915162648-CP0 164648-CP0 48 (1215)2,115 P.O.R.
29
Options 160 Series- Screw Drive -
Travel Length
SCREW Price - Additional Price Per Axis
6 thru 12(150) thru (300)
$ 80
Rolled Ball Screws
S005 S006 S007 S009
S014
S010 S011
S013 S015
inches(mm)
18 thru 30(455) thru (760)
36 thru 60(910) thru (1520)
S018S017 S019
Travel Length
6 thru 12(150) thru (300)
Precision Ball Screws
S114 S115 S116 S117 S121S118 S119 S120 S122inches(mm)
18 thru 30(455) thru (760)
36 thru 60(910) thru (1520)
S123
Travel Length
6 thru 12(150) thru (300)
Precision Ball Screws
S124 S125 S128 S129inches(mm)
18 thru 30(455) thru (760)
36 thru 60(910) thru (1520)
Travel Length
6 thru 12(150) thru (300)
Ground Ball Screws
S212 S213 S214 S215inches(mm)
18 thru 24(455) thru (600)
30 thru 36(760) thru (910)
Travel Length
6 thru 12(150) thru (300)
Rolled Acme Screws
S300 S301 S302 S303inches(mm)
18 thru 30(455) thru (760)
36 thru 60(910) thru (1520)
Power Supplies
part # 41970 ... $ 150- 5 VDC (120/240 VAC input)part # 37488 . $ 150- 24 VDC (120/240 VAC input)part # 37489 ........ $ 165- 90 VDC (120 VAC input)part # 37490 ........ $ 165- 90 VDC (240 VAC input)
Multiple Axis Mounting Charges
X-Y system ......................................................X-Z system ......................................................
$
Note:
X-Y-Z system ..................................................
Chrome Plated Linear Rails, Screw & Nut ... P.O.R.
P.O.R. - Price On RequestNC - No Charge
106
132
$ 279
305
331
NC
NC
NC
$ 876
1,040
1,289
$1,609
1,772
2,021
$ 279
411
557
$ 562
644
756
$1,120
1,201
1,314
$ 224
262
305
$ 605
700
876
$1,170
1,289
1,439
$ 224
262
305
$ 247
322
390
$ 514
588
656
$ 322
383
444
$ 692
755
818
$ 366
451
569
$ 724
811
935
$ 395
464
557
$ 831
896
991
$ 923
1,015
1,096
$ 520
613
692
$ 923
1,015
1,096
$ 520
613
692
$ 588
699
872
$1,163
1,276
1,450
$1,222
1,765
2,371
$1,222
1,765
2,371
$ 250
341
503
$ 443
533
694
$ 250
341
503
$ 443
533
694
150P.O.R.P.O.R.
The above X-Y multiple axis mounting charge con-sists of having extra threaded inserts placed in the bottom X axis carriage and then mounting the Y axis. For X-Z and X-Y-Z systems contact LINTECH for a custom price.
Travel Length
6 thru 12(150) thru (300)
Rolled Ball Screwsinches(mm)
18 thru 30(455) thru (760)
36 thru 60(910) thru (1520)
$ 218
S008
218
218
S012
$ 500
625
750
S020
$ 443
479
525
S016
$ 443
479
525
S223
$1,393
1,936
2,438
P.O.R.
P.O.R.
P.O.R.
P.O.R.
P.O.R.
P.O.R.
30
Ordering Guide 170 Series- Screw Drive -
Table Series
Cover Plate
Screw Options
Limit & Home Switches
Coupling Options
Encoder Options
Power-off Brakes
06 - 3 to 60 inches
other
C000 - none
E00 - none E01 - rotary (500 lines/rev)
E02 - rotary (1000 lines/rev) E03 - rotary (1270 lines/rev)
E10 - linear (2500 lines/inch) E99 - other
B00 - none B01 - 24 VDC B02 - 90 VDC B99 - other
C025 to C029 - C100 C048 to C055 - C125
C130 to C134 - H100 C155 to C164 - H131
C407 to C413 - G100 C435 to C444 - G126 C999 - other
EOT switches only EOT & home switches
L00 - no switches
home switch only
Mechanical Reed HallL01 L02 L03
L04 L05 L06
L07 L08 L09
L10 L11 L12
Prox (NPN)L99 - other
E11 - linear (250 lines/mm)
M02 C155 ---- B00E00- 1 - L01-
Motor MountM00 - none M01 - hand crank
M02 - NEMA 23 mount (E)
M04 - NEMA 34 mount (E) M07 -
M09 -
NEMA 23 (LH) wrap
M99 - NEMA 34 (LH) wrap
M06 - NEMA 23 (RH) wrap
M08 - NEMA 34 (RH) wrap M03 - NEMA 23 mount (M)
M05 - NEMA 34 mount (M)
(E) - English Interface(LH) - Left Hand(M) - Metric Interface
(NPL) - Non Preloaded(PL) - Preloaded(RH) - Right Hand(T) - Turcite Nut
S005
L13 L14 L15
Prox (PNP)
Travel Length
Carriage Length
Carriage Inserts
06 - CP16217
2 bearings 2 - 4 bearings4 -Number of Bearings
CP0 - no cover plates
WC1 - waycovers
C470 to C480 - G158
1 - English mount 2 - Metric mount
6 inches 6 -
CP1 - top cover plate only
CP2 - top & side cover plates
S005 - .625 x .200 NPLS006 -
S013 -S014 -
S009 -S010 -
Rolled ball screws
.625 x .200 PL
.750 x .200 NPL
.750 x .200 PL
.625 x 1.000 NPL
.625 x 1.000 PL
S007 - .625 x .200 NPL(T)
S015 - .750 x .200 NPL(T)
S011 - .625 x 1.000 NPL(T)
S999 - other
S017 -S018 -
.750 x .500 NPL
.750 x .500 PLS019 - .750 x .500 NPL(T)
- .625 x .200 NPL-----
Precision ball screws
.625 x .200 PL16 x 5 NPL16 x 5 PL16 x 10 NPL16 x 10 PL
--
16 x 16 NPL16 x 16 PL
S117 S118
S114 S115
S120 S121
S119
S116
- .750 x .200 NPL-----
.750 x .200 PL20 x 5 NPL20 x 5 PL20 x 20 NPL20 x 20 PL
S125 S128
S122 S123
S129
S124
- .625 x .200 PL
--
Ground ball screws
16 x 5 PL 16 x 16 PL
.625 x .100 NPL Rolled acme screws
.625 x .100 PL
.625 x .200 NPL
.625 x .200 PL
S212
S214 S215
- .625 x .500 PL S213
-
--
S300
S302 S303
-S301
Rolled ball screws
S016 - .750 x .200 PL(T)
S012 - .625 x 1.000 PL(T)
S008 - .625 x .200 PL(T) S020 - .750 x .500 PL(T)
- 16 x 10 PL S223
4 bearings4 -
12 inches 12 -
31
Pricing Example: 174612-CP1-2-S117-M03-C407-L10-E00-B00 for Top (Y) axis174660-CP1-2-S117-M05-C436-L10-E00-B00 for Bottom (X) axis Mounted in an X-Y configuration using the T-slot X-Y plate
174612-CP1-2-S117-M03-C407-L10-E00-B00
=========
$ 1,50570
150692250110375
00
$ 3,152
Coupling Part Numbers
Options 170 Series- Screw Drive -
G100-375-250G100-375-375G100-375-500G100-375-006G100-375-008G100-375-010G100-375-012
C407C408C409C410C411C412C413
G126-375-250G126-375-375G126-375-500G126-375-625G126-375-006G126-375-008G126-375-010G126-375-012G126-375-014G126-375-016
C435C436C437C438C439C440C441C442C443C444
C100-375-250C100-375-375C100-375-006C100-375-008C100-375-010
C025C026C027C028C029
C125-375-250C125-375-375C125-375-500C125-375-006C125-375-008C125-375-010C125-375-012C125-375-014
C048C049C050C051C052C053C054C055
H100-375-250H100-375-375H100-375-006H100-375-008H100-375-010
C130C131C132C133C134
H131-375-250H131-375-375H131-375-500H131-375-625H131-375-006H131-375-008H131-375-010H131-375-012H131-375-014H131-375-016
C155C156C157C158C159C160C161C162C163C164
G158-375-375G158-375-500G158-375-625G158-375-750G158-375-010G158-375-012G158-375-014G158-375-016G158-375-018G158-375-019G158-375-020
C470C471C472C473C474C475C476C477C478C479C480
174660-CP1-2-S117-M05-C436-L10-E00-B00
=========
$ 2,845150150818320140375
00
$ 4,798
203192 adapter plate203294 T-nut packageMounting Charge
===
$ 10040
150$ 290
Note: Coupling style C125, H131, and G158 can not be used with the NEMA 23 motor mounts (M02 & M03) because of the cou-pling length. The NEMA 34 motor mounts (M04 & M05), or a custom motor mount is required.
32
612182430
Travel Length
inches
3642
5460
Linear EncodersCover Plate OptionsModel #
172606172612172618172624172630
172636172642
172654172660
Price2 bearingSystem
Model # Price4 bearingSystem
NC
CP0 CP2
NCNCNCNC
NCNC
NCNC
E10 or E11(mm)
(150)
(300)
(455)
(605)
(760)
(910)
(1060)
(1370)
(1520)
174606174612174618174624174630
174636174642
174654174660
Options 170 SeriesScrew Drive - 6 inch Carriage
$ 1,1551,3051,3601,5301,600
1,6901,860
2,2902,645
$ 1,3551,5051,5601,7301,800
1,8902,060
2,4902,845
$ 260285310335360
385410
460485
Linear EncodersModel #
172603-WC1172608-WC1172612-WC1172617-WC1172622-WC1
172628-WC1172632-WC1
172641-WC1172647-WC1
Price2 bearingSystem
Model # Price4 bearingSystem E10 or E11
174603-WC1174608-WC1174612-WC1174617-WC1174622-WC1
174628-WC1174632-WC1
174641-WC1174647-WC1
3.78.0
12.817.522.0
Travel Length
inches
28.032.5
41.547.5
(mm)
(94)
(203)
(325)
(444)
(555)
(710)
(825)
(1050)
(1205)
$ 1,6821,7691,9162,1922,355
2,5522,840
3,4943,932
$ 1,8821,9692,1162,3922,555
2,7523,040
3,6944,132
170-CP0 Series* screw drive
* without cover plates
* 6 inch carriage
170-CP1 Series* screw drive
* with top cover plate only
* 6 inch carriage
170-CP2 Series* screw drive
* with top & side cover plates
* 6 inch carriage
170-WC1 Series* screw drive
* with waycovers* 6 inch carriage
CP1
$ 60708090
100
110120
140150
(1) The -CP2 option is NOT available with any Linear Encoder option.
(1) (1)
P.O.R.P.O.R.
P.O.R.P.O.R.P.O.R.
P.O.R.P.O.R.
P.O.R.P.O.R.
P.O.R.P.O.R.
P.O.R.P.O.R.P.O.R.
P.O.R.P.O.R.
P.O.R.P.O.R.
48172648 NC(1215)1746481,955 2,155 435130 P.O.R.
172637-WC1 174637-WC1 37.0 (935)3,062 3,262 P.O.R.
33
Options 170 SeriesScrew Drive - 12 inch Carriage
612182430
Travel Length
inches
3642
54
Linear EncodersCover Plate OptionsModel #
17412061741212174121817412241741230
17412361741242
1741254
Price4 bearingSystem
Model # Price6 bearingSystem
NC
CP0 CP2
NCNCNCNC
NCNC
NC
E10 or E11(mm)
(150)
(300)
(455)
(605)
(760)
(910)
(1060)
(1370)
17612061761212176121817612241761230
17612361761242
1761254
$ 1,5551,6951,8201,8901,980
2,1502,245
2,935
$ 1,7551,8952,0202,0902,180
2,3502,445
3,135 485
$ 285310335360385
410
460
Linear EncodersModel #
1741203-WC11741208-WC11741212-WC11741217-WC11741222-WC1
1741228-WC11741232-WC1
1741241-WC1
Price4 bearingSystem
Model # Price6 bearingSystem E10 or E11
1761203-WC11761208-WC11761212-WC11761217-WC11761222-WC1
1761228-WC11761232-WC1
1761241-WC1
3.78.0
12.817.522.0
Travel Length
inches
28.032.5
41.5
(mm)
(94)
(203)
(325)
(444)
(555)
(710)
(825)
(1050)
$ 2,0542,2172,4822,6402,814
3,1393,355
4,215
$ 2,2542,4172,6822,8403,014
3,3393,555
4,415
170-CP0 Series* screw drive
* without cover plates
* 12 inch carriage
170-CP1 Series* screw drive
* with top cover plate only
* 12 inch carriage
170-CP2 Series* screw drive
* with top & side cover plates
* 12 inch carriage
170-WC1 Series* screw drive
* with waycovers* 12 inch carriage
CP1
150
$ 708090
100110
120
140
(1) The -CP2 option is NOT available with any Linear Encoder option.
(1) (1)
P.O.R.P.O.R.
P.O.R.P.O.R.P.O.R.
P.O.R.P.O.R.
P.O.R.
P.O.R.P.O.R.
P.O.R.P.O.R.P.O.R.
P.O.R.P.O.R.
P.O.R.
481741248 NC(1215)17612482,580 2,780435130
P.O.R.
1741237-WC1 1761237-WC1 37.0 (935)3,752 3,952 P.O.R.
Power Supplies
part # 41970 ... $ 150- 5 VDC (120/240 VAC input)part # 37488 . $ 150- 24 VDC (120/240 VAC input)part # 37489 ........ $ 165- 90 VDC (120 VAC input)part # 37490 ........ $ 165- 90 VDC (240 VAC input)
Multiple Axis Mounting Charges
X-Y system ......................................................X-Z system ......................................................
$
Note:X-Y-Z system ..................................................
150P.O.R.P.O.R.
Coupling Options
........................... $ 80C025 to - C100 style C029
........................... $ 105C048 to - C125 style C055
........................... $ 65C130 to - H100 style C134
........................... $ 85C155 to - H131 style C164
........................... $ 110C407 to - G100 style C413
........................... $ 140C435 to - G126 style C444
........................... $ 175C470 to - G158 style C480
Carriage Adapter Plates
.....................part # 203192 - T-slot X-Y platepart # 203294 - Package of 5 T-Nuts .............
$ $
10040
The above X-Y multiple axis mounting charge con-sists of having extra threaded inserts placed in the bottom X axis carriage, or mounting the T-slot X-Y plate, and then mounting the Y axis. For X-Z and X-Y-Z systems contact LINTECH for a custom price.
Note - Part # 203294 required when ordering part # 203192
34
Options 170 Series- Screw Drive -
Chrome Plated Linear Rails, Screw & Nut ... P.O.R.
Limit & Home Switches
L01 .......... $ - EOT & home wired (mechanical)L02 ................ $ - EOT only wired (mechanical)L03 .............. $ - Home only wired (mechanical)
L04 .................... $ - EOT & home wired (reed)L05 .......................... $ - EOT only wired (reed)L06 ........................ $ - Home only wired (reed)
L07 ...................... $ - EOT & home wired (hall)L08 ............................ $ - EOT only wired (hall)L09 .......................... $ - Home only wired (hall)
L10 ............ $ - EOT & home wired (prox-NPN)L11 .................. $ - EOT only wired (prox-NPN)L12 ................ $ - Home only wired (prox-NPN)
L13 ............ $ - EOT & home wired (prox-PNP)L14 .................. $ - EOT only wired (prox-PNP)L15 ................ $ - Home only wired (prox-PNP)
Motor Mounts
M01 ........................................... $ - Hand crankM02 ............................. $ - NEMA 23 mount (E)M03 ............................. $ - NEMA 23 mount (M)M04 ............................. $ - NEMA 34 mount (E)M05 ............................. $ - NEMA 34 mount (M)M06 ........... $ 350- NEMA 23 right hand (RH) wrapM07 .............. $ 350- NEMA 23 left hand (LH) wrapM08 ............ $ 500- NEMA 34 right hand (RH) wrapM09 .............. $ 500- NEMA 34 left hand (LH) wrapM99 ............................. P.O.R.- Other motor mounts
320200
135135250
Carriage Inserts
1 ....................................... $ NC- English Mount 2 ................. $ - Metric Mount (6 inch carriage) 150
P.O.R. - Price On RequestNC - No Charge
170135120
200150130
370275195
375285185
375285185
Rotary Encoders
E01 ......................................... $ 600- 500 lines/revE02 ....................................... $ 600- 1000 lines/revE03 ....................................... $ 600- 1270 lines/rev
Power-off Brakes
B01 ................................................. $ 525- 24 VDCB02 ................................................. $ 525- 90 VDC
2 ............... $ - Metric Mount (12 inch carriage) 240
35
SCREW Price - Additional Price Per Axis
Rolled Ball Screws
S005 S006 S007 S009
S014
S010 S011
S013 S015
Rolled Ball Screws
S017 S018 S019
Precision Ball Screws
S114 S115 S116 S117
S121
S118 S119 S120
S122 S123
Precision Ball Screws
S124 S125 S128 S129
Ground Ball Screws
S212 S213 S214 S215
Rolled Acme Screws
S300 S301 S302 S303
Options 170 Series- Screw Drive -
Travel Length - 6 inch Carriage
6 thru 12(150) thru (300)
inches(mm)
inches(mm)
170-(CP0, CP1, CP2) 170-WC1
S008 S012
S016 S020
S223
$ 562
644
756
$1,120
1,201
1,314
$ 224
262
305
$ 80
106
132
$ 279
305
331
NC
NC
NC
$ 876
1,040
1,289
$1,609
1,772
2,021
$ 279
411
557
$ 218
218
218
$ 500
625
750
$ 605
700
876
$1,170
1,289
1,439
$ 224
262
305
$ 443
479
525
$ 443
479
525
$ 247
322
390
$ 514
588
656
$ 322
383
444
$ 692
755
818
$ 366
451
569
$ 724
811
935
$ 395
464
557
$ 831
896
991
$ 923
1,015
1,096
$ 520
613
692
$ 923
1,015
1,096
$ 520
613
692
$ 588
699
872
$1,163
1,276
1,450
$1,222
1,765
2,371
$1,222
1,765
2,371
$1,393
1,936
2,438
$ 250
341
503
$ 443
533
694
$ 250
341
503
$ 443
533
694
3.7 thru 8.0(94) thru (203)
6(150)
3.7(150)
18 thru 30(455) thru (760)
12.8 thru 22.0(325) thru (555)
12 thru 36(300) thru (910)
8.0 thru 28.0(203) thru (710)
36 thru 60(910) thru (1520)
28.0 thru 47.5(710) thru (1205)
42 thru 54(1060) thru (1370)
32.5 thru 41.5(825) thru (1050)
Travel Length - 12 inch Carriage
inches(mm)
inches(mm)
170-(CP0, CP1, CP2) 170-WC1
Travel Length - 6 inch Carriage
6 thru 12(150) thru (300)
inches(mm)
inches(mm)
170-(CP0, CP1, CP2) 170-WC1
3.7 thru 8.0(94) thru (203)
6(150)
3.7(150)
18 thru 30(455) thru (760)
12.8 thru 22.0(325) thru (555)
12 thru 36(300) thru (910)
8.0 thru 28.0(203) thru (710)
36 thru 60(910) thru (1520)
28.0 thru 47.5(710) thru (1205)
42 thru 54(1060) thru (1370)
32.5 thru 41.5(825) thru (1050)
Travel Length - 12 inch Carriage
inches(mm)
inches(mm)
170-(CP0, CP1, CP2) 170-WC1
Travel Length - 6 inch Carriage
6 thru 12(150) thru (300)
inches(mm)
inches(mm)
170-(CP0, CP1, CP2) 170-WC1
3.7 thru 8.0(94) thru (203)
6(150)
3.7(150)
18 thru 30(455) thru (760)
12.8 thru 22.0(325) thru (555)
12 thru 36(300) thru (910)
8.0 thru 28.0(203) thru (710)
36 thru 60(910) thru (1520)
28.0 thru 47.5(710) thru (1205)
42 thru 54(1060) thru (1370)
32.5 thru 41.5(825) thru (1050)
Travel Length - 12 inch Carriage
inches(mm)
inches(mm)
170-(CP0, CP1, CP2) 170-WC1
Travel Length - 6 inch Carriage
6 thru 12(150) thru (300)
inches(mm)
inches(mm)
170-(CP0, CP1, CP2) 170-WC1
3.7 thru 8.0(94) thru (203)
6(150)
3.7(150)
18 thru 30(455) thru (760)
12.8 thru 22.0(325) thru (555)
12 thru 36(300) thru (910)
8.0 thru 28.0(203) thru (710)
36 thru 60(910) thru (1520)
28.0 thru 47.5(710) thru (1205)
42 thru 54(1060) thru (1370)
32.5 thru 41.5(825) thru (1050)
Travel Length - 12 inch Carriage
inches(mm)
inches(mm)
170-(CP0, CP1, CP2) 170-WC1
Travel Length - 6 inch Carriage
6 thru 12(150) thru (300)
inches(mm)
inches(mm)
170-(CP0, CP1, CP2) 170-WC1
3.7 thru 8.0(94) thru (203)
6(150)
3.7(150)
18 thru 30(455) thru (760)
12.8 thru 22.0(325) thru (555)
12 thru 36(300) thru (910)
8.0 thru 28.0(203) thru (710)
36 thru 60(910) thru (1520)
28.0 thru 47.5(710) thru (1205)
42 thru 54(1060) thru (1370)
32.5 thru 41.5(825) thru (1050)
Travel Length - 12 inch Carriage
inches(mm)
inches(mm)
170-(CP0, CP1, CP2) 170-WC1
Travel Length - 6 inch Carriage
6 thru 12(150) thru (300)
inches(mm)
inches(mm)
170-(CP0, CP1, CP2) 170-WC1
3.7 thru 8.0(94) thru (203)
6(150)
3.7(150)
18 thru 30(455) thru (760)
12.8 thru 22.0(325) thru (555)
12 thru 36(300) thru (910)
8.0 thru 28.0(203) thru (710)
36 thru 60(910) thru (1520)
28.0 thru 47.5(710) thru (1205)
42 thru 54(1060) thru (1370)
32.5 thru 41.5(825) thru (1050)
Travel Length - 12 inch Carriage
inches(mm)
inches(mm)
170-(CP0, CP1, CP2) 170-WC1
P.O.R.
P.O.R.
P.O.R.
P.O.R.
P.O.R.
P.O.R.
36
Ordering Guide 180 Series- Belt Drive -
Table Series
Carriage Length
Travel Length
Drive Shaft
D2
Motor Mount
-D1 - Right Hand single shaft
6 - 6 inches
003 - 3 to 108 inches
M00 - none M02 -M03 - NEMA 23 mount (M)
NEMA 23 mount (E)
Limit & Home Switches
Coupling Options
Encoder Options
Power-off Brakes
C000 - none
L00 - no switches
C130 to C134 - H100 C155 to C164 - H131
C407 to C413 - G100 C435 to C444 - G126 C470 to C480 - G158
L99 - other
M99 - other
C999 - none
note: When selecting any rotary encoder option, the Drive Shaft D3 or D4 above is required.
note: When selecting any brake option, the Drive Shaft D3 or D4 above is required.B00 - none B01 - 24 VDC B02 - 90 VDC B99 - other
E00 - none E01 - rotary (500 lines/rev)
E02 - rotary (1000 lines/rev) E03 - rotary (1270 lines/rev)
E99 - other
M02 C155 ---- B00E00D1 - L04-
M04 -M05 - NEMA 34 mount (M)
NEMA 34 mount (E)
(E) - English Interface(M) - Metric Interface
Left Hand single shaft D4 -D3 - Right Hand thru shaft
Left Hand thru shaft
EOT switches only EOT & home switches
home switch only
Reed HallL04 L05 L06
L07 L08 L09
L10 L11 L12
Prox (NPN)L13 L14 L15
Prox (PNP)
- 1- CP16418
Number of Bearings2 - 2 bearings per carriage 4 - 4 bearings per carriage
004
Cover Plate
Carriage Inserts1 - English mount 2 - Metric mount
C190 to C200 - H163
CP0 - no cover plates
WC1 - waycovers CP1 - top cover plate only
CP2 - top & side cover plates
12 - 12 inches
6 - 6 bearings per carriage
37
Options 180 Series- Belt Drive -
H100-375-250H100-375-375H100-375-006H100-375-008H100-375-010
C130C131C132C133C134
H163-375-375H163-375-500H163-375-625H163-375-750H163-375-010H163-375-012H163-375-014H163-375-016H163-375-018H163-375-019H163-375-020
C190C191C192C193C194C195C196C197C198C199C200
C407C408C409C410C411C412C413
G100-375-250G100-375-375G100-375-500G100-375-006G100-375-008G100-375-010G100-375-012
C435C436C437C438C439C440C441C442C443C444
G126-375-250G126-375-375G126-375-500G126-375-625G126-375-006G126-375-008G126-375-010G126-375-012G126-375-014G126-375-016
C470C471C472C473C474C475C476C477C478C479C480
G158-375-375G158-375-500G158-375-625G158-375-750G158-375-010G158-375-012G158-375-014G158-375-016G158-375-018G158-375-019G158-375-020
H131-375-250H131-375-375H131-375-500H131-375-625H131-375-006H131-375-008H131-375-010H131-375-012H131-375-014H131-375-016
C155C156C157C158C159C160C161C162C163C164
Coupling Part Numbers
Pricing Example: 1826036-CP1-1-D3-M02-C155-L10-E00-B02 for Top (Y) axis1846072-CP0-1-D3-M02-C155-L10-E00-B00 for Bottom (X) axis Master1846072-CP0-1-D3-M00-C000-L00-E00-B02 for Bottom (X) axis Slave
1826036-CP1-1-D3-M02-C155-L10-E00-B02
=========
$ 2,155110
080
13085
3750
525$ 3,460
Qty 2 (part # 203192)Qty 2 (part # 203294)Qty 2 (part # C191)47.5 inch cross shaft
====
$ 20080
20071
$ 551
1846072-CP0-1-D3-M02-C155-L10-E00-B00
=========
$ 3,13000
80130
85375
00
$ 3,8001846072-CP0-1-D3-M00-C000-L00-E00-B02
=========
$ 3,13000
800000
525
$ 3,735
Note: Coupling style H163 & G158 can not be used with the NEMA 23 or NEMA 34 motor mounts (M02, M03, M04, & M05) because of the coupling length & diameter. No motor mount, or a custom motor mount is required.
38
Options 180 SeriesBelt Drive - 6 inch Carriage
3.78.0
12.817.522.0
28.032.5
41.547.5
(94)
(203)
(325)
(444)
(555)
(710)
(825)
(1050)
(1205)
56.765.574.584.0
(1440)
(1660)
(1890)
(2130)
Travel Length
inches
Model #
1826003-WC11826008-WC11826012-WC11826017-WC11826022-WC1
1826028-WC11826032-WC1
1826041-WC11826047-WC1
Price2 bearingSystem
Model # Price4 bearingSystem (mm)
1846003-WC11846008-WC11846012-WC11846017-WC11846022-WC1
1846028-WC11846032-WC1
1846041-WC11846047-WC1
1826056-WC11826065-WC11826074-WC11826084-WC1
1846056-WC11846065-WC11846074-WC11846084-WC1
$ 2,1002,2072,3802,5442,691
3,0313,386
3,8084,004
4,4155,1306,0166,561
$ 2,3002,4072,5802,7442,891
3,2313,586
4,0084,204
4,6155,3306,2166,761
For travels greater than 60 inches the TOP cover plate CAN NOT be used. This is due to the cover plate weight, which causes excess deflection at mid stroke, which causes the plate to rub on the carriage.
612182430
Travel Length
inches
3642
5460
Model #
18260061826012182601818260241826030
18260361826042
18260541826060
Price2 bearingSystem
Model # Price4 bearingSystem (mm)
(150)
(300)
(455)
(605)
(760)
(910)
(1060)
(1370)
(1520)
18460061846012184601818460241846030
18460361846042
18460541846060
728496
108
1826072182608418260961826108
(1825)
(2130)
(2435)
(2740)
1846072184608418460961846108
$ 1,5651,5951,7301,8401,930
2,1552,325
2,6252,715
2,9303,0804,0554,460
$ 1,7651,7951,9302,0402,130
2,3552,525
2,8252,915
3,1303,2804,2554,660
Cover Plate Options
NC
CP0 CP2
NCNCNCNC
NCNC
NCNC
$ 260285310335360
385410
460485
CP1
$ 60708090
100
110120
140150
180-WC1 Series* belt drive
* with waycovers* 6 inch carriage
180-CP0 Series* belt drive
* without cover plates
* 6 inch carriage
180-CP1 Series* belt drive
* with top cover plate only
* 6 inch carriage
180-CP2 Series* belt drive
* with top & side cover plates
* 6 inch carriage
NCNCNCNC
NANANANA
350365380395
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
481826048 (1215)18460482,455 2,655 NC 435130
37.0 (935)1826037-WC1 1846037-WC13,474 3,674
39
Options 180 SeriesBelt Drive - 12 inch Carriage
3.78.0
12.817.522.0
28.032.5
41.553.5
(94)
(203)
(325)
(444)
(555)
(710)
(825)
(1050)
(1355)
Travel Length
inches
Model #
18412003-WC118412008-WC118412012-WC118412017-WC118412022-WC1
18412028-WC118412032-WC1
18412041-WC118412053-WC1
Price4 bearingSystem
Model # Price6 bearingSystem (mm)
18612003-WC118612008-WC118612012-WC118612017-WC118612022-WC1
18612028-WC118612032-WC1
18612041-WC118612053-WC1
$ 2,4882,6672,8292,9723,288
3,6753,762
4,2974,698
$ 2,6882,8673,0293,1723,488
3,8753,962
4,4974,898
For travels greater than 60 inches the TOP cover plate CAN NOT be used. This is due to the cover plate weight, which causes excess deflection at mid stroke, which causes the plate to rub on the carriage.
612182430
Travel Length
inches
3642
5466
Model #
1841200618412012184120181841202418412030
1841203618412042
1841205418412066
Price4 bearingSystem
Model # Price6 bearingSystem (mm)
(150)
(300)
(455)
(605)
(760)
(910)
(1060)
(1370)
(1675)
1861200618612012186120181861202418612030
1861203618612042
1861205418612066
7890
102
184120781841209018412102
(1980)
(2285)
(2590)
186120781861209018612102
$ 1,8852,0202,1302,2202,445
2,6152,745
3,0053,220
3,3704,3454,750
$ 2,0852,2202,3302,4202,645
2,8152,945
3,2053,420
3,5704,5454,950
Cover Plate Options
NC
CP0 CP2
NCNCNCNC
NCNC
NCNC
$ 285310335360385
410435
485350
CP1
$ 708090
100110
120130
150
180-WC1 Series* belt drive
* with waycovers* 12 inch carriage
180-CP0 Series* belt drive
* without cover plates
* 12 inch carriage
180-CP1 Series* belt drive
* with top cover plate only
* 12 inch carriage
180-CP2 Series* belt drive
* with top & side cover plates
* 12 inch carriage
NCNCNC
NANANA
NA
365380395
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
4818412048 (1215)186120482,915 3,115 NC 460140
37.0 (935)18412037-WC1 18612037-WC14,102 4,302
40
Options 180 Series- Belt Drive -
Coupling Options
........................... $ 65C130 to - H100 style C134
........................... $ 85C155 to - H131 style C164
........................... $ 100C190 to - H163 style C200
........................... $ 110C407 to - G100 style C413
........................... $ 140C435 to - G126 style C444
........................... $ 175C470 to - G158 style C480
Rotary Encoders
E01 ......................................... $ 600- 500 lines/revE02 ....................................... $ 600- 1000 lines/revE03 ....................................... $ 600- 1270 lines/rev
Power-off Brakes
B01 ................................................. $ 525- 24 VDCB02 ................................................. $ 525- 90 VDC
Power Supplies
part # 41970 ... $ 150- 5 VDC (120/240 VAC input)part # 37488 . $ 150- 24 VDC (120/240 VAC input)part # 37489 ........ $ 165- 90 VDC (120 VAC input)part # 37490 ........ $ 165- 90 VDC (240 VAC input)
Carriage Inserts
1 ....................................... $ NC- English Mount
Limit & Home Switches
L04 .................... $ - EOT & home wired (reed)L05 .......................... $ - EOT only wired (reed)L06 ........................ $ - Home only wired (reed)
L07 ...................... $ - EOT & home wired (hall)L08 ............................ $ - EOT only wired (hall)L09 .......................... $ - Home only wired (hall)
L10 ............ $ - EOT & home wired (prox-NPN)L11 .................. $ - EOT only wired (prox-NPN)L12 ................ $ - Home only wired (prox-NPN)
L13 ............ $ - EOT & home wired (prox-PNP)L14 .................. $ - EOT only wired (prox-PNP)L15 ................ $ - Home only wired (prox-PNP)
Motor Mounts
M02 ............................. $ - NEMA 23 mount (E)M03 ............................. $ - NEMA 23 mount (M)M04 ............................. $ - NEMA 34 mount (E)M05 ............................. $ - NEMA 34 mount (M)M99 ............................. P.O.R.- Other motor mounts
Drive Shaft
D1 or D2 ....... $ NC- Right or left hand single shaft$ D3 or D4 ..........- Right or left hand thru shaft
Cross Shaft ........................................ $ 1.50 per inch .............part # 203196 - Cross Shaft Support $ 90
80
130
270160220
Chrome Plated Linear Rails .......................... P.O.R.
P.O.R. - Price On RequestNC - No Charge
Multiple Axis Mounting Charges
X-Y system ......................................................X-Z system ......................................................
$
X-Y-Z system ..................................................
150P.O.R.P.O.R.
Carriage Adapter Plates
.....................part # 203192 - T-slot X-Y plate $ 100part # 203294 - Package of 5 T-Nuts ............. $ 40
Note: The above X-Y multiple axis mounting charge con-sists of having extra threaded inserts placed in the bottom X axis carriage, or mounting the T-slot X-Y plate, and then mounting the Y axis. For X-Z and X-Y-Z systems contact LINTECH for a custom price.
Note: Part # 203294 required when ordering part # 203192. This allows the base of the table to be mounted to the adapter plate.
200150130
370275195
375285185
375285185
2 ................. $ - Metric Mount (6 inch carriage) 1502 ............... $ - Metric Mount (12 inch carriage) 240
41
Model #
GIL23-03
Gearhead Price
GIL34-03
GRA23-02GRA23-03
GRA34-02GRA34-03
GRA23-01
GRA34-01
Options 180 Series- Belt Drive -
P.O.R.
P.O.R.
P.O.R.P.O.R.P.O.R.
P.O.R.P.O.R.P.O.R.
42
Ordering Guide 150 Series- Screw Drive -
Table Series
Waycovers
Screw Options
Limit & Home Switches
Coupling Options
Encoder Options
Power-off Brakes
WC0 - with no waycovers
4 inches
06 - 6 to 62 inches
other
S005 - .625 x .200 NPLS006 -
S013 -S014 -
S009 -S010 -
C000 - none
E00 - none E01 - rotary (500 lines/rev)
E02 - rotary (1000 lines/rev) E03 - rotary (1270 lines/rev)
E10 - linear (2500 lines/inch) E99 - other
B00 - none B01 - 24 VDC B02 - 90 VDC B99 - other
Rolled ball screws
.625 x .200 PL
.750 x .200 NPL
.750 x .200 PL
.625 x 1.000 NPL
.625 x 1.000 PL
C025 to C029 - C100 C048 to C055 - C125
C130 to C134 - H100 C155 to C164 - H131
C407 to C413 - G100 C435 to C444 - G126 C999 - other
EOT switches only EOT & home switches
L00 - no switches
home switch only
Mechanical Reed HallL01 L02 L03
L04 L05 L06
L07 L08 L09
L10 L11 L12
Prox (NPN)L99 - other
E11 - linear (250 lines/mm)
M02 C155 ---- B00E00- 106 - L01-- WC1
1 - English mount 2 - Metric mount
S007 - .625 x .200 NPL(T)
S015 - .750 x .200 NPL(T)
S011 - .625 x 1.000 NPL(T)
- .625 x .200 PL
--
Ground ball screws
16 x 5 PL 16 x 16 PL
.625 x .100 NPL Rolled acme screws
.625 x .100 PL
.625 x .200 NPL
.625 x .200 PL
Motor MountM00 - none M01 - hand crank
M02 - NEMA 23 mount (E)
M04 - NEMA 34 mount (E) M07 -
M09 -
NEMA 23 (LH) wrap
M99 - NEMA 34 (LH) wrap
M06 - NEMA 23 (RH) wrap
M08 - NEMA 34 (RH) wrap M03 - NEMA 23 mount (M)
M05 - NEMA 34 mount (M)
S999 - other
(E) - English Interface(LH) - Left Hand(M) - Metric Interface
(NPL) - Non Preloaded(PL) - Preloaded(RH) - Right Hand(T) - Turcite Nut
S212
S214 S215
- .625 x .500 PL S213
-
--
S300
S302 S303
-S301
S114
L13 L14 L15
Prox (PNP)
08
04 - 8 inches 08 -
WC1 - with waycovers
S017 -S018 -
.750 x .500 NPL
.750 x .500 PLS019 - .750 x .500 NPL(T)
- .625 x .200 NPL-----
Precision ball screws
.625 x .200 PL16 x 5 NPL16 x 5 PL16 x 10 NPL16 x 10 PL
--
16 x 16 NPL16 x 16 PL
S117 S118
S114 S115
S120 S121
S119
S116
- .750 x .200 NPL-----
.750 x .200 PL20 x 5 NPL20 x 5 PL20 x 20 NPL20 x 20 PL
S125 S128
S122 S123
S129
S124
Travel Length
Carriage Length
Carriage Inserts
15
- .750 x .200 PL S216 - .750 x .500 PL S217
S020 - .750 x .500 PL(T)
S016 - .750 x .200 PL(T)
S012 - .625 x 1.000 PL(T)
S008 - .625 x .200 PL(T)
- 16 x 10 PL S223
43
Pricing Example: 150412-WC1-2-S117-M03-C407-L10-E00-B00 for Top (Y) axis150848-WC1-2-S117-M05-C435-L10-E00-B00 for Bottom (X) axisMounted in an X-Y configuration
150412-WC1-2-S117-M03-C407-L10-E00-B00
========
$ 4,235160692250110375
00
G100-375-250G100-375-375G100-375-500G100-375-006G100-375-008G100-375-010G100-375-012
C407C408C409C410C411C412C413
G126-375-250G126-375-375G126-375-500G126-375-625G126-375-006G126-375-008G126-375-010G126-375-012G126-375-014G126-375-016
C435C436C437C438C439C440C441C442C443C444
C100-375-250C100-375-375C100-375-006C100-375-008C100-375-010
C025C026C027C028C029
C125-375-250C125-375-375C125-375-500C125-375-006C125-375-008C125-375-010C125-375-012C125-375-014
C048C049C050C051C052C053C054C055
H100-375-250H100-375-375H100-375-006H100-375-008H100-375-010
C130C131C132C133C134
H131-375-250H131-375-375H131-375-500H131-375-625H131-375-006H131-375-008H131-375-010H131-375-012H131-375-014H131-375-016
C155C156C157C158C159C160C161C162C163C164
150848-WC1-2-S117-M05-C435-L10-E00-B00
========
$ 10,374160818300140375
00
$ 5,822
$ 12,167
Mounting Charge = $ 150
$ 150
Coupling Part Numbers
Options 150 Series- Screw Drive -
44
150-WC0 Series* screw drive
* without waycovers* 4 & 8 inch carriages
150-WC1 Series* screw drive
* with waycovers* 4 & 8 inch carriages
6121824
30
Travel Length
inches
3648
6121824
303648
Model #
150408-WC0150416-WC0150423-WC0150431-WC0
150439-WC0150446-WC0150462-WC0
150808-WC0150816-WC0150823-WC0150831-WC0
150839-WC0150846-WC0150862-WC0
Price
150-WC0
Model #
150406-WC1150412-WC1150418-WC1150424-WC1
150430-WC1150436-WC1150448-WC1
150806-WC1150812-WC1150818-WC1150824-WC1
150830-WC1150836-WC1150848-WC1
Price
150-WC1 (mm)
(150)
(300)
(455)
(605)
(760)
(910)
(1215)
(150)
(300)
(455)
(1215)
(910)
(760)
(605)
8162331
39
Travel Length
inches
4662
8162331
394662
(mm)
(200)
(400)
(580)
(785)
(990)
(1165)
(1570)
(200)
(400)
(580)
(1570)
(1165)
(990)
(785)
Motor Mounts
M01 ........................................... $ - Hand crankM02 ............................. $ - NEMA 23 mount (E)M03 ............................. $ - NEMA 23 mount (M)M04 ............................. $ - NEMA 34 mount (E)M05 ............................. $ - NEMA 34 mount (M)M06 ........... $ 375- NEMA 23 right hand (RH) wrapM07 .............. $ 375- NEMA 23 left hand (LH) wrapM08 ............ $ 600- NEMA 34 right hand (RH) wrapM09 .............. $ 600- NEMA 34 left hand (LH) wrap
Coupling Options
........................... $ 80C025 to - C100 style C029
........................... $ 105C048 to - C125 style C055
........................... $ 65C130 to - H100 style C134
........................... $ 85C155 to - H131 style C164
........................... $ 110C407 to - G100 style C413
........................... $ 140C435 to - G126 style C444
M99 ............................. P.O.R.- Other motor mounts
Carriage Inserts
1 ....................................... $ NC- English Mount 2 ......................................... $ - Metric Mount
300190
135135250
160
Limit & Home Switches
L01 .......... $ - EOT & home wired (mechanical)L02 ................ $ - EOT only wired (mechanical)L03 .............. $ - Home only wired (mechanical)
L04 .................... $ - EOT & home wired (reed)L05 .......................... $ - EOT only wired (reed)L06 ........................ $ - Home only wired (reed)
L07 ...................... $ - EOT & home wired (hall)L08 ............................ $ - EOT only wired (hall)L09 .......................... $ - Home only wired (hall)
L10 ............ $ - EOT & home wired (prox-NPN)L11 .................. $ - EOT only wired (prox-NPN)L12 ................ $ - Home only wired (prox-NPN)
L13 ............ $ - EOT & home wired (prox-PNP)L14 .................. $ - EOT only wired (prox-PNP)L15 ................ $ - Home only wired (prox-PNP)
Rotary Encoders
E01 ......................................... $ 600- 500 lines/revE02 ....................................... $ 600- 1000 lines/revE03 ....................................... $ 600- 1270 lines/rev
Power-off Brakes
B01 ................................................. $ 525- 24 VDCB02 ................................................. $ 525- 90 VDC
Options 150 Series- Screw Drive -
$ 2,4243,0603,5713,874
4,7565,2906,492
3,0583,6264,3504,878
5,5876,2647,074
$ 3,1404,2355,1895,662
7,2397,8989,558
3,8044,8175,9936,710
8,1028,861
10,374
Linear Encoders
E10 or E11
GroundScrewCode
1123
3NANA
1223
NANANA
P.O.R. - Price On RequestNC - No ChargeNA - Not Available
170135120
200150130
370275195
375285185
375285185
P.O.R.P.O.R.P.O.R.P.O.R.
P.O.R.P.O.R.P.O.R.
P.O.R.P.O.R.P.O.R.P.O.R.
P.O.R.P.O.R.P.O.R.
45
Travel Length
SCREW Price - Additional Price Per Axis
8 thru 16(200) thru (400)
Rolled Ball Screws
S005 S006 S007 S009
S014
S010 S011
S013 S015
inches(mm)
23 thru 39(580) thru (990)
46 thru 62(1165) thru (1570)
Power Supplies
part # 41970 ... $ 150- 5 VDC (120/240 VAC input)part # 37488 . $ 150- 24 VDC (120/240 VAC input)part # 37489 ........ $ 165- 90 VDC (120 VAC input)part # 37490 ........ $ 165- 90 VDC (240 VAC input)
Chrome Plated Linear Rails, Screw & Nut ... P.O.R.
6 thru 12(150) thru (300)
18 thru 30(455) thru (760)
36 thru 48(910) thru (1215)
inches(mm)
150-WC0 150-WC1
Travel Length Rolled Ball Screws
S017 S018 S019inches(mm)
inches(mm)
150-WC0 150-WC1
Travel Length Precision Ball Screws
S114 S115 S116 S117 S121S118 S119 S120 S122inches(mm) S123inches
(mm)
150-WC0 150-WC1
Travel Length Precision Ball Screws
S124 S125 S128 S129inches(mm)
inches(mm)
150-WC0 150-WC1
Ground Ball Screws
S212 S213 S214 S215
Travel Length Rolled Acme Screws
S300 S301 S302 S303inches(mm)
inches(mm)
150-WC0 150-WC1
8 thru 16(200) thru (400)
23 thru 39(580) thru (990)
46 thru 62(1165) thru (1570)
6 thru 12(150) thru (300)
18 thru 30(455) thru (760)
36 thru 48(910) thru (1215)
8 thru 16(200) thru (400)
23 thru 39(580) thru (990)
46 thru 62(1165) thru (1570)
6 thru 12(150) thru (300)
18 thru 30(455) thru (760)
36 thru 48(910) thru (1215)
8 thru 16(200) thru (400)
23 thru 39(580) thru (990)
46 thru 62(1165) thru (1570)
6 thru 12(150) thru (300)
18 thru 30(455) thru (760)
36 thru 48(910) thru (1215)
8 thru 16(200) thru (400)
23 thru 39(580) thru (990)
46 thru 62(1165) thru (1570)
6 thru 12(150) thru (300)
18 thru 30(455) thru (760)
36 thru 48(910) thru (1215)
S216 S217
P.O.R. - Price On Request
NC - No Charge
Options 150 Series- Screw Drive -
$ 113
151
189
$ 305
343
381
NC
NC
NC
$ 976
1,089
1,314
$1,640
1,806
2,062
$ 284
420
566
$ 598
667
773
$1,142
1,224
1,339
$ 227
267
330
$ 617
739
891
$1,192
1,314
1,467
$ 227
273
338
$ 278
351
426
$ 514
588
656
$ 322
383
444
$ 692
755
818
$ 371
451
569
$ 724
847
935
$ 371
464
557
$ 829
899
991
$ 923
1,015
1,095
$ 520
613
692
$ 923
1,015
1,095
$ 520
613
692
$ 588
699
872
$1,163
1,276
1,449
$1,222
1,769
$1,222
1,769
$ 250
341
503
$ 443
533
694
$ 250
341
503
$ 443
533
694
Multiple Axis Mounting Charges
X-Y system ......................................................X-Z system ......................................................
$
Note:
X-Y-Z system ..................................................
150P.O.R.P.O.R.
7,617
The above X-Y multiple axis mounting charge con-sists of having extra threaded inserts placed in the bottom X axis carriage and then mounting the Y axis. For X-Z and X-Y-Z systems contact LINTECH for a custom price.
S008
$ 221
221
221
S012
$ 515
636
764
S020
$ 457
489
535
S016
$ 451
509
572
$4,442
5,504
2,373 2,373
S223
2,438
$1,397
1,936
Ground ScrewCode
1
(See page 36)
2
3
P.O.R.
P.O.R.
P.O.R.
P.O.R.
P.O.R.
P.O.R.
P.O.R.
P.O.R.
P.O.R.
46
Ordering Guide 200 Series- Screw Drive -
Table Series
Waycovers
Screw Options
Limit & Home Switches
Coupling Options
Encoder Options
Power-off Brakes
WC0 - with no waycovers
6 inches
06 - 6 to 55 inches
other
S013 -S014 -
C000 - none
E00 - none E01 - rotary (500 lines/rev)
E02 - rotary (1000 lines/rev) E03 - rotary (1270 lines/rev)
E10 - linear (2500 lines/inch) E99 - other
B00 - none B03 - 24 VDC B04 - 90 VDC B99 - other
Rolled ball screws.750 x .200 NPL.750 x .200 PL
C056 to C063 - C125 C084 to C090 - C150
C165 to C174 - H131 C201 to C211 - H163
C445 to C454 - G126 C481 to C491 - G158 C999 - other
EOT switches only EOT & home switches
L00 - no switches
home switch only
Mechanical Reed HallL01 L02 L03
L04 L05 L06
L07 L08 L09
L10 L11 L12
Prox (NPN)L99 - other
E11 - linear (250 lines/mm)
M02 C165 ---- B00E00- 106 - L01-- WC1
1 - English mount 2 - Metric mount
S015 - .750 x .200 NPL(T)
- .750 x .200 PL
--
Ground ball screws
20 x 5 PL 20 x 20 PL
.750 x .100 NPL Rolled acme screws
.750 x .100 PL
.750 x .200 NPL
.750 x .200 PL
Motor MountM00 - none M01 - hand crank
M02 - NEMA 23 mount (E)
M04 - NEMA 34 mount (E)
M13 -
M09 -
NEMA 42 (LH) wrap
M99 -
NEMA 34 (LH) wrap
M12 - NEMA 42 (RH) wrap
M08 - NEMA 34 (RH) wrap M03 - NEMA 23 mount (M)
M05 - NEMA 34 mount (M)
S999 - other
(E) - English Interface(LH) - Left Hand(M) - Metric Interface
(NPL) - Non Preloaded(PL) - Preloaded(RH) - Right Hand(T) - Turcite Nut
S216
S221 S222
- .750 x .500 PL S217
-
--
S306
S308 S309
-S307
S013
L13 L14 L15
Prox (PNP)
06
06 - 12 inches 12 -
WC1 - with waycovers
S017 -S018 -
.750 x .500 NPL
.750 x .500 PLS019 - .750 x .500 NPL(T)
Precision ball screws- .750 x .200 NPL-----
.750 x .200 PL20 x 5 NPL20 x 5 PL20 x 20 NPL20 x 20 PL
S125 S128
S122 S123
S129
S124
Travel Length
Carriage Length
Carriage Inserts
20
M10 - NEMA 42 mount (E) M11 - NEMA 42 mount (M)
S016 - .750 x .200 PL(T)
S020 - .750 x .500 PL(T)
47
Pricing Example: 200612-WC1-2-S123-M03-C445-L10-E00-B00 for Top (Y) axis201248-WC1-2-S123-M05-C445-L10-E00-B00 for Bottom (X) axisMounted in an X-Y configuration
200612-WC1-2-S123-M03-C445-L10-E00-B00
========
$ 5,379275587285140375
00
G126-500-250G126-500-375G126-500-500G126-500-625G126-500-006G126-500-008G126-500-010G126-500-012G126-500-014G126-500-016
C445C446C447C448C449C450C451C452C453C454
C125-500-250C125-500-375C125-500-500C125-500-006C125-500-008C125-500-010C125-500-012C125-500-014
C056C057C058C059C060C061C062C063
H131-500-250H131-500-375H131-500-500H131-500-625H131-500-006H131-500-008H131-500-010H131-500-012H131-500-014H131-500-016
C165C166C167C168C169C170C171C172C173C174
201248-WC1-2-S123-M05-C445-L10-E00-B00
========
$ 11,210275904330140375
00
$ 7,041
$ 13,234
Mounting Charge = $ 200
$ 200
Coupling Part Numbers
C150-500-375C150-500-500C150-500-625C150-500-010C150-500-012C150-500-014C150-500-016
C084C085C086C087C088C089C090
H163-500-375H163-500-500H163-500-625H163-500-750H163-500-010H163-500-012H163-500-014H163-500-016H163-500-018H163-500-019H163-500-020
C201C202C203C204C205C206C207C208C209C210C211
G158-500-375G158-500-500G158-500-625G158-500-750G158-500-010G158-500-012G158-500-014G158-500-016G158-500-018G158-500-019G158-500-020
C481C482C483C484C485C486C487C488C489C490C491
Options 200 Series- Screw Drive -
Note: Coupling style C150, H163, and G158 can not be used with the NEMA 23 & NEMA 34 motor mounts (M02, M03, M04 & M05) because of the coupling length. The NEMA 42 motor mounts (M10 & M11), or a custom motor mount is required.
48
200-WC0 Series* screw drive
* without waycovers* 6 & 12 inch carriages
200-WC1 Series* screw drive
* with waycovers* 6 & 12 inch carriages
Motor Mounts
M01 ........................................... $ - Hand crankM02 ............................. $ - NEMA 23 mount (E)M03 ............................. $ - NEMA 23 mount (M)M04 ............................. $ - NEMA 34 mount (E)M05 ............................. $ - NEMA 34 mount (M)M08 ............ $ 600- NEMA 34 right hand (RH) wrapM09 .............. $ 600- NEMA 34 left hand (LH) wrap
Coupling Options
........................... $ 105C056 to - C125 style C063
........................... $ 135C084 to - C150 style C090
........................... $ 85C165 to - H131 style C174
........................... $ 100C201 to - H163 style C211
........................... $ 140C445 to - G126 style C454
........................... $ 175C481 to - G158 style C491
M99 ............................. P.O.R.- Other motor mounts
Carriage Inserts
1 ....................................... $ NC- English Mount 2 ......................................... $ - Metric Mount
330220
135170285
275
Limit & Home Switches
L01 .......... $ - EOT & home wired (mechanical)L02 ................ $ - EOT only wired (mechanical)L03 .............. $ - Home only wired (mechanical)
L04 .................... $ - EOT & home wired (reed)L05 .......................... $ - EOT only wired (reed)L06 ........................ $ - Home only wired (reed)
L07 ...................... $ - EOT & home wired (hall)L08 ............................ $ - EOT only wired (hall)L09 .......................... $ - Home only wired (hall)
L10 ............ $ - EOT & home wired (prox-NPN)L11 .................. $ - EOT only wired (prox-NPN)L12 ................ $ - Home only wired (prox-NPN)
L13 ............ $ - EOT & home wired (prox-PNP)L14 .................. $ - EOT only wired (prox-PNP)L15 ................ $ - Home only wired (prox-PNP)
Rotary Encoders
E01 ......................................... $ 600- 500 lines/revE02 ....................................... $ 600- 1000 lines/revE03 ....................................... $ 600- 1270 lines/rev
Power-off Brakes
B03 ................................................. $ 720- 24 VDCB04 ................................................. $ 720- 90 VDC
M12 ............ $ 830- NEMA 42 right hand (RH) wrapM13 .............. $ 830- NEMA 42 left hand (LH) wrap
M10 ............................. $ - NEMA 42 mount (E)M11 ............................. $ - NEMA 42 mount (M) 650
650
Options 200 Series- Screw Drive -
6121824
30
Travel Length
inches
3648
6121824
303648
Model #
200607-WC0200614-WC0200621-WC0200628-WC0
200635-WC0200641-WC0200655-WC0
201207-WC0201214-WC0201221-WC0201228-WC0
201235-WC0201241-WC0201255-WC0
Price
200-WC0
Model #
200606-WC1200612-WC1200618-WC1200624-WC1
200630-WC1200636-WC1200648-WC1
201206-WC1201212-WC1201218-WC1201224-WC1
201230-WC1201236-WC1201248-WC1
Price
200-WC1 (mm)
(150)
(300)
(455)
(605)
(760)
(910)
(1215)
(150)
(300)
(455)
(1215)
(910)
(760)
(605)
Travel Length
inches (mm)
$ 3,4294,2264,6485,164
6,1366,8447,890
4,2004,9095,5106,464
7,1737,3538,447
$ 4,2245,3795,9976,864
8,0559,091
10,530
5,0286,0866,8918,221
9,1309,623
11,210
7142128
354155
7142128
354155
(175)
(355)
(530)
(710)
(885)
(1040)
(1395)
(175)
(355)
(530)
(1395)
(1040)
(885)
(710)
Linear Encoders
E10 or E11
GroundScrewCode
1122
233
1122
333
P.O.R. - Price On RequestNA - Not Available NC - No Charge
170135120
200150130
370275195
375285185
375285185
P.O.R.P.O.R.P.O.R.P.O.R.
P.O.R.P.O.R.P.O.R.
P.O.R.P.O.R.P.O.R.P.O.R.
P.O.R.P.O.R.P.O.R.
49
Travel Length
SCREW Price - Additional Price Per Axis
7 thru 14(175) thru (355)
Rolled Ball Screws
S013 S014 S015 S017 S018 S019inches(mm)
21 thru 35(530) thru (885)
41 thru 55(1040) thru (1395)
Chrome Plated Linear Rails, Screw & Nut ... P.O.R.
6 thru 12(150) thru (300)
18 thru 30(455) thru (760)
36 thru 48(910) thru (1215)
inches(mm)
200-WC0 200-WC1
Travel Length Precision Ball Screws
S122 S123 S124 S125 S128 S129inches(mm)
inches(mm)
200-WC0 200-WC1
Ground Ball Screws
S216 S217 S221 S222
Travel Length Rolled Acme Screws
S306 S307 S308 S309inches(mm)
inches(mm)
200-WC0 200-WC1
7 thru 14(175) thru (355)
21 thru 35(530) thru (885)
41 thru 55(1040) thru (1395)
6 thru 12(150) thru (300)
18 thru 30(455) thru (760)
36 thru 48(910) thru (1215)
7 thru 14(175) thru (355)
21 thru 35(530) thru (885)
41 thru 55(1040) thru (1395)
6 thru 12(150) thru (300)
18 thru 30(455) thru (760)
36 thru 48(910) thru (1215)
Power Supplies
part # 41970 ... $ 150- 5 VDC (120/240 VAC input)part # 37488 . $ 150- 24 VDC (120/240 VAC input)part # 37489 ........ $ 165- 90 VDC (120 VAC input)part # 37490 ........ $ 165- 90 VDC (240 VAC input)
Options 200 Series- Screw Drive -
$ 508
580
683
$1,030
1,101
1,204
NC
NC
NC
$ 508
580
683
$1,030
1,101
1,204
$ 109
172
244
$ 507
613
717
$1,029
1,135
1,239
$ 309
472
625
$ 587
749
904
$ 309
472
625
$ 587
749
904
$5,606
6,881
9,394 NA NA
$ 444
643
849
$ 720
921
1,127
$ 444
643
849
$ 720
921
1,127
Multiple Axis Mounting Charges
X-Y system ......................................................X-Z system ......................................................
$
Note:
X-Y-Z system ..................................................
200P.O.R.P.O.R.
The above X-Y multiple axis mounting charge con-sists of having extra threaded inserts placed in the bottom X axis carriage and then mounting the Y axis. For X-Z and X-Y-Z systems contact LINTECH for a custom price.
S020
$ 404
469
539
S016
$ 313
313
313
P.O.R. - Price On RequestNC - No ChargeNA - Not Available
Ground ScrewCode
1
(See page 40)
2
3
P.O.R.
P.O.R.
P.O.R.
P.O.R.
P.O.R.
P.O.R.
P.O.R.
50
Ordering Guide 250 Series- Screw Drive -
Table Series
Waycovers
Screw Options
Limit & Home Switches
Coupling Options
Encoder Options
Power-off Brakes
WC0 - with no waycovers
6 inches
06 - 6 to 56 inches
other
S021 -S022 -
C000 - none
E00 - none E01 - rotary (500 lines/rev)
E02 - rotary (1000 lines/rev) E03 - rotary (1270 lines/rev)
E10 - linear (2500 lines/inch) E99 - other
B00 - none B05 - 24 VDC B06 - 90 VDC B99 - other
Rolled ball screws1.000 x .250 NPL1.000 x .250 PL
C064 to C068 - C125 C091 to C097 - C150
C175 to C182 - H131 C212 to C222 - H163
C455 to C462 - G126 C492 to C502 - G158 C999 - other
EOT switches only EOT & home switches
L00 - no switches
home switch only
Mechanical Reed HallL01 L02 L03
L04 L05 L06
L07 L08 L09
L10 L11 L12
Prox (NPN)L99 - other
E11 - linear (250 lines/mm)
M04 C175 ---- B00E00- 106 - L01-- WC1
1 - English mount 2 - Metric mount
S023 - 1.000 x .250 NPL(T)
- 1.000 x .200 PL
-
Ground ball screws
25 x 25 PL
1.000 x .100 NPL Rolled acme screws
1.000 x .100 PL 1.000 x .200 NPL1.000 x .200 PL
Motor MountM00 - none M04 - NEMA 34 mount (E)
M13 -M09 - NEMA 42 (LH) wrap M99 - NEMA 34 (LH) wrap M12 - NEMA 42 (RH) wrap M08 - NEMA 34 (RH) wrap
M05 - NEMA 34 mount (M)
S999 - other
(E) - English Interface(LH) - Left Hand(M) - Metric Interface
(NPL) - Non Preloaded(PL) - Preloaded(RH) - Right Hand(T) - Turcite Nut
S218
S220 - 1.000 x .500 PL S219
-
--
S310
S312 S313
-S311
S021
L13 L14 L15
Prox (PNP)
06
06 - 12 inches 12 -
WC1 - with waycovers
S025 -S026 -
1.000 x .500 NPL1.000 x .500 PL
S027 - 1.000 x .500 NPL(T)
Precision ball screws- 1.000 x .200 NPL-----
1.000 x .200 PL25 x 10 NPL25 x 10 PL25 x 25 NPL25 x 25 PL
S133 S134
S130 S131
S135
S132
Travel Length
Carriage Length
Carriage Inserts
25
M10 - NEMA 42 mount (E) M11 - NEMA 42 mount (M)
S029 -S030 -
1.000 x 1.000 NPL1.000 x 1.000 PL
S031 - 1.000 x 1.000 NPL(T)
S024 - 1.000 x .250 PL(T)
S028 - 1.000 x .500 PL(T)
S032 - 1.000 x 1.000 PL(T)
51
Pricing Example: 250612-WC1-2-S133-M05-C455-L10-E00-B00 for Top (Y) axis251248-WC1-2-S133-M11-C492-L10-E00-B00 for Bottom (X) axisMounted in an X-Y configuration
250612-WC1-2-S133-M05-C455-L10-E00-B00
========
$ 5,469275
1,273390140375
00
G126-625-375G126-625-500G126-625-625G126-625-008G126-625-010G126-625-012G126-625-014G126-625-016
C455C456C457C458C459C460C461C462
C125-625-375C125-625-500C125-625-010C125-625-012C125-625-014
C064C065C066C067C068
H131-625-375H131-625-500H131-625-625H131-625-008H131-625-010H131-625-012H131-625-014H131-625-016
C175C176C177C178C179C180C181C182
251248-WC1-2-S133-M11-C492-L10-E00-B00
========
$ 13,350275
1,528650175375
00
$ 7,922
$ 16,353
Mounting Charge = $ 200
$ 200
Coupling Part Numbers
C150-625-375C150-625-500C150-625-625C150-625-010C150-625-012C150-625-014C150-625-016
C091C092C093C094C095C096C097
H163-625-375H163-625-500H163-625-625H163-625-750H163-625-010H163-625-012H163-625-014H163-625-016H163-625-018H163-625-019H163-625-020
C212C213C214C215C216C217C218C219C220C221C222
G158-625-375G158-625-500G158-625-625G158-625-750G158-625-010G158-625-012G158-625-014G158-625-016G158-625-018G158-625-019G158-625-020
C492C493C494C495C496C497C498C499C500C501C502
Options 250 Series- Screw Drive -
52
250-WC0 Series* screw drive
* without waycovers* 6 & 12 inch carriages
250-WC1 Series* screw drive
* with waycovers* 6 & 12 inch carriages
Motor Mounts
M04 ............................. $ - NEMA 34 mount (E)M05 ............................. $ - NEMA 34 mount (M)M08 ............ $ 850- NEMA 34 right hand (RH) wrapM09 .............. $ 850- NEMA 34 left hand (LH) wrap
Coupling Options
........................... $ 105C064 to - C125 style C068
........................... $ 135C091 to - C150 style C097
........................... $ 85C175 to - H131 style C182
........................... $ 100C212 to - H163 style C222
........................... $ 140C455 to - G126 style C462
........................... $ 175C492 to - G158 style C502
M99 ............................. P.O.R.- Other motor mounts
Carriage Inserts
1 ....................................... $ NC- English Mount 2 ......................................... $ - Metric Mount
390275
275
Limit & Home Switches
L01 .......... $ - EOT & home wired (mechanical)L02 ................ $ - EOT only wired (mechanical)L03 .............. $ - Home only wired (mechanical)
L04 .................... $ - EOT & home wired (reed)L05 .......................... $ - EOT only wired (reed)L06 ........................ $ - Home only wired (reed)
L07 ...................... $ - EOT & home wired (hall)L08 ............................ $ - EOT only wired (hall)L09 .......................... $ - Home only wired (hall)
L10 ............ $ - EOT & home wired (prox-NPN)L11 .................. $ - EOT only wired (prox-NPN)L12 ................ $ - Home only wired (prox-NPN)
L13 ............ $ - EOT & home wired (prox-PNP)L14 .................. $ - EOT only wired (prox-PNP)L15 ................ $ - Home only wired (prox-PNP)
Rotary Encoders
E01 ......................................... $ 600- 500 lines/revE02 ....................................... $ 600- 1000 lines/revE03 ....................................... $ 600- 1270 lines/rev
Power-off Brakes
B05 ................................................. $ 850- 24 VDCB06 ................................................. $ 850- 90 VDCP.O.R. - Price On RequestNC - No Charge
M12 ............ $ 950- NEMA 42 right hand (RH) wrapM13 .............. $ 950- NEMA 42 left hand (LH) wrap
M10 ............................. $ - NEMA 42 mount (E)M11 ............................. $ - NEMA 42 mount (M) 650
500
Options 250 Series- Screw Drive -
6121824
30
Travel Length
inches
3648
6121824
303648
Model #
250607-WC0250614-WC0250621-WC0250628-WC0
250635-WC0250642-WC0250656-WC0
251207-WC0251214-WC0251221-WC0251228-WC0
251235-WC0251242-WC0251256-WC0
Price
250-WC0
Model #
250606-WC1250612-WC1250618-WC1250624-WC1
250630-WC1250636-WC1250648-WC1
251206-WC1251212-WC1251218-WC1251224-WC1
251230-WC1251236-WC1251248-WC1
Price
250-WC1 (mm)
(150)
(300)
(455)
(605)
(760)
(910)
(1215)
(150)
(300)
(455)
(1215)
(910)
(760)
(605)
Travel Length
inches (mm)
$ 3,7644,2085,0225,748
6,1017,5288,640
4,9005,5686,3267,102
7,8779,304
10,074
$ 4,7945,4696,5767,678
8,40910,35811,854
5,9686,8838,0249,085
10,26212,20313,350
7.514.521.528.5
35.542.556.0
7.514.521.528.5
35.542.556.0
(190)
(365)
(545)
(720)
(900)
(1075)
(1420)
(190)
(365)
(545)
(1420)
(1075)
(900)
(720)
Linear Encoders
E10 or E11
GroundScrewCode
1122
233
1222
333
170135120
200150130
370275195
375285185
375285185
P.O.R.P.O.R.P.O.R.P.O.R.
P.O.R.P.O.R.P.O.R.
P.O.R.P.O.R.P.O.R.P.O.R.
P.O.R.P.O.R.P.O.R.
53
Travel Length
SCREW Price - Additional Price Per Axis
7.5 thru 14.5(190) thru (365)
Rolled Ball Screws
S021 S022 S023 S025 S026 S027inches(mm)
21.5 thru 35.5(545) thru (900)
42.3 thru 56.0(1075) thru (1420)
Chrome Plated Linear Rails, Screw & Nut ... P.O.R.
6 thru 12(150) thru (300)
18 thru 30(455) thru (760)
36 thru 48(910) thru (1215)
inches(mm)
250-WC0 250-WC1
Travel Length Precision Ball Screws
S130 S131 S132 S133 S134 S135inches(mm)
inches(mm)
250-WC0 250-WC1
Ground Ball Screws
S218 S219 S220
Travel Length Rolled Acme Screws
S310 S311 S312 S313inches(mm)
inches(mm)
250-WC0 250-WC1
Power Supplies
part # 41970 ... $ 150- 5 VDC (120/240 VAC input)part # 37488 . $ 150- 24 VDC (120/240 VAC input)part # 37489 ........ $ 165- 90 VDC (120 VAC input)part # 37490 ........ $ 165- 90 VDC (240 VAC input)
P.O.R. - Price On RequestNC - No Charge
7.5 thru 14.5(190) thru (365)
21.5 thru 35.5(545) thru (900)
42.3 thru 56.0(1075) thru (1420)
6 thru 12(150) thru (300)
18 thru 30(455) thru (760)
36 thru 48(910) thru (1215)
7.5 thru 14.5(190) thru (365)
21.5 thru 35.5(545) thru (900)
42.3 thru 56.0(1075) thru (1420)
6 thru 12(150) thru (300)
18 thru 30(455) thru (760)
36 thru 48(910) thru (1215)
S029 S030 S031
Options 250 Series- Screw Drive -
$ 580
712
850
$1,147
1,275
1,417
NC
NC
NC
$ 580
712
850
NC
NC
NC
$ 580
712
850
NC
NC
NC
$ 683
820
944
$1,273
1,416
1,528
$ 820
955
1,080
$1,440
1,575
1,699
$5,351
6,728
7,573
$6,947
8,352
9,168
$6,947
8,352
9,168
$ 557
651
748
$ 780
873
971
$ 557
651
748
$ 780
873
971
Multiple Axis Mounting Charges
X-Y system ......................................................X-Z system ......................................................
$
Note:
X-Y-Z system ..................................................
200P.O.R.P.O.R.
The above X-Y multiple axis mounting charge con-sists of having extra threaded inserts placed in the bottom X axis carriage and then mounting the Y axis. For X-Z and X-Y-Z systems contact LINTECH for a custom price.
Travel Length
7.5 thru 14.5(190) thru (365)
Rolled Ball Screwsinches(mm)
21.5 thru 35.5(545) thru (900)
42.3 thru 56.0(1075) thru (1420)
6 thru 12(150) thru (300)
18 thru 30(455) thru (760)
36 thru 48(910) thru (1215)
inches(mm)
250-WC0 250-WC1
S024
$ 355
355
355
S028
$ 355
355
355
S032
$ 355
355
355
Ground ScrewCode
1
(See page 44)
2
3
$1,147
1,275
1,417
$1,147
1,275
1,417
P.O.R. P.O.R.
P.O.R.P.O.R.
P.O.R. P.O.R.
54
550 Series* belt drive* 10 inch carriage
Ordering Guide 550 Series- Belt Drive -
Table Series
Carriage Length
Travel Length
Drive Shaft
D2
Motor Mount
-D1 - Right Hand single shaft
553 - 553 carriage
10 - 10 inches
012 - 12 to 360 inches
M00 - none; just shaft extension M04 -M05 - NEMA 34 mount (M)
NEMA 34 mount (E)
554 - 554 carriage
Limit & Home Switches
Coupling Options
Encoder Options
Power-off Brakes
C000 - none
L00 - no switches
C293 to C303 - H197 C359 to C369 - H225
C573 to C583 - G177 C639 to C649 - G220
C684 to C691 - G260
L99 - other
M99 - other
C999 - none
note: When selecting any rotary encoder option, the Drive Shaft D3 or D4 above is required.
note: When selecting any brake option, the Drive Shaft D3 or D4 above is required.B00 - none B05 - 24 VDC B06 - 90 VDC B99 - other
E00 - none E01 - rotary (500 lines/rev)
E02 - rotary (1000 lines/rev) E03 - rotary (1270 lines/rev)
E99 - other
M04 C293 ---- B00E00D1 - L04-01210553
M10 -M11 - NEMA 42 mount (M)
NEMA 42 mount (E)
(E) - English Interface(M) - Metric Interface
Left Hand single shaft D4 -D3 - Right Hand thru shaft
Left Hand thru shaft
EOT switches only EOT & home switches
home switch only
Reed HallL04 L05 L06
L07 L08 L09
L10 L11 L12
Prox (NPN)L13 L14 L15
Prox (PNP)
555 - 555 carriage
55
H197-018-375H197-018-500H197-018-625H197-018-750H197-018-010H197-018-012H197-018-014H197-018-016H197-018-018H197-018-019H197-018-020
C293C294C295C296C297C298C299C300C301C302C303
H225-018-500H225-018-625H225-018-750H225-018-999H225-018-012H225-018-014H225-018-016H225-018-018H225-018-019H225-018-020H225-018-024
C359C360C361C362C363C364C365C366C367C368C369
C573C574C575C576C577C578C579C580C581C582C583
G177-018-375G177-018-500G177-018-625G177-018-750G177-018-010G177-018-012G177-018-014G177-018-016G177-018-018G177-018-019G177-018-020
C639C640C641C642C643C644C645C646C647C648C649
G220-018-500G220-018-625G220-018-750G220-018-999G220-018-012G220-018-014G220-018-016G220-018-018G220-018-019G220-018-020G220-018-024
C684C685C686C687C688C689C690C691
G260-018-625G260-018-750G260-018-999G260-018-016G260-018-018G260-018-019G260-018-020G260-018-024
Pricing Example: 55310144-D3-M04-C359-L10-E00-B06 for Top (Y) axis55310120-D3-M04-C359-L10-E00-B00 for Bottom (X) axis Master55310120-D3-M00-C000-L00-E00-B06 for Bottom (X) axis Slave
55310144-D3-M04-C359-L10-E00-B06
=======
$ 6,51050
265200500
0950
$ 8,475
Qty 2 (part #202026)Qty 2 (part #201742)Tubular Steel Drive
===
$ 310790
P.O.R
Call Lintech for Final Pricing Total
55310120-D3-M04-C359-L10-E00-B00
=======
$ 5,76050
265200500
00
$ 6,775
55310120-D3-M00-C000-L00-E00-B06
=======
$ 5,76050
0000
950
$ 6,760
Coupling Part Numbers
Options 550 Series- Belt Drive -
Note: Coupling style G260 can not be used with the NEMA 34 or NEMA 42 motor mounts (M04, M05, M10, & M11) because of the coupling length & diameter. No motor mount, or a custom motor mount is required.
56
1218243036
Travel Length
inches
4860728496
108120132144
Model #
5531001255310018553100245531003055310036
5531004855310060553100725531008455310096
55310108553101205531013255310144
Price553 carriage
(mm)
(300)
(455)
(605)
(760)
(910)
(1215)
(1520)
(1825)
(2130)
(2435)
(3655)
(3350)
(3045)
(2740)
55310180
553102405531030055310360
Model #
5551001255510018555100245551003055510036
5551004855510060555100725551008455510096
55510108555101205551013255510144
Price555 carriage
55510180
555102405551030055510360
180 (4572)
240 (6096)
300 (7620)
360 (9144)
Motor Mounts
M04 ............................. $ - NEMA 34 mount (E)M05 ............................. $ - NEMA 34 mount (M)M10 ............................. $ - NEMA 42 mount (E)M11 ............................. $ - NEMA 42 mount (M)M99 ............................. P.O.R.- Other motor mounts
Drive Shaft
D1 or D2 ....... $ NC- Right or left hand single shaft$ D3 or D4 ..........- Right or left hand thru shaft
Coupling Options
........................... $ 175C293 to - H197 style C303
........................... $ 200C359 to - H225 style C369
........................... $ 305C573 to - G177 style C583
........................... $ 320C639 to - G220 style C649
........................... $ C684 to - G260 style C691
Limit & Home Switches
L04 .................... $ 250- EOT & home wired (reed)L05 .......................... $ 205- EOT only wired (reed)L06 ........................ $ 160- Home only wired (reed)
L07 ...................... $ 465- EOT & home wired (hall)L08 ............................ $ 350- EOT only wired (hall)L09 .......................... $ 250- Home only wired (hall)
L10 ............ $ 500- EOT & home wired (prox-NPN)L11 .................. $ 385- EOT only wired (prox-NPN)L12 ................ $ 250- Home only wired (prox-NPN)
L13 ............ $ 500- EOT & home wired (prox-PNP)L14 .................. $ 385- EOT only wired (prox-PNP)L15 ................ $ 250- Home only wired (prox-PNP)
Rotary Encoders (option D3 or D4 required)
E01 ......................................... $ 600- 500 lines/revE02 ....................................... $ 600- 1000 lines/revE03 ....................................... $ 600- 1270 lines/rev
Power-off Brakes (option D3 or D4 required)
B05 ................................................. $ - 24 VDCB06 ................................................. $ - 90 VDC
Power Supplies
part # 41970 ... $ 150- 5 VDC (120/240 VAC input)part # 37488 . $ 150- 24 VDC (120/240 VAC input)part # 37489 ........ $ 165- 90 VDC (120 VAC input)part # 37490 ........ $ 165- 90 VDC (240 VAC input)
Model #
5541001255410018554100245541003055410036
5541004855410060554100725541008455410096
55410108554101205541013255410144
Price
$ 2,495
554 carriage
55410180
554102405541030055410360
(lube ports) (self lubing bearings) (quiet with lube ports)
2,610 2,725 3,010 3,085
3,370 3,585 4,035 4,250 5,052
5,340 5,760 6,000 6,510 7,560
9,380 10,730 12,100
$ 2,935 3,075 3,215 3,505 3,565
3,910 4,220 4,750 4,900 5,955
6,285 6,780 7,065 7,540 8,875
10,835 12,605 14,265
$ 2,565 2,680 2,795 3,080 3,165
3,450 3,665 4,105 4,320 5,122
5,410 5,830 6,070 6,5807,630
9,450 10,800 12,170
50
265395275425
405
950950
Chrome Plated Linear Rails ........................... P.O.R.P.O.R. - Price On RequestNC - No Charge
Options 550 Series- Belt Drive -
Model #
GIL34-03GIL34-05GIL34-10
Gearhead Price
GIL42-03GIL42-05GIL42-10
GRA34-03GRA34-05GRA34-10
GRA42-03GRA42-05GRA42-10
GRA34-01
GRA42-01
Carriage Fastener Rails & Base Mounting Brackets
..........
Multiple Axis Angle Brackets
Multiple Axis Mounting Charges
X-Y or X-Z system with Bracket or Plate ........X-Y-Z system with Bracket or Plate ................
part # 201174 - Carriage Fastener Railpart # 46627 - Base Mounting Bracket .........
$ $
$ $
150200
Carriage Adapter Plates
......part # 201353 - 550 base to 550 carriagepart # 201173 - 550 carriage to 550 carriage .
......part # 201742 - 550 base to 550 carriage
$ $ $
......part # 201171 - 550 base to 550 carriagepart # 201724
- 550 carriage to 550 carriage .......
part # 201738- 550 base to 550 carriage
$ $ $
2215
400400395
325895895
Mounting Hardware Kits
......part # 202023 - For Adapter Plate 201353 $ 1554 carriage fastener rails (201174)4 base mounting brackets (46627)12 M5 x 20 mm bolts8 M6 x 30 mm bolts
......part # 202024 - For Adapter Plate 201353 $ 1904 carriage fastener rails (201174)6 base mounting brackets (46627)12 M5 x 20 mm bolts12 M6 x 30 mm bolts
......part # 202025 - For Adapter Plate 201173 $ 1658 carriage fastener rails (201174)24 M5 x 20 mm bolts
......part # 202026 - For Adapter Plate 201742 $ 1554 carriage fastener rails (201174)4 base mounting brackets (46627)12 M5 x 20 mm bolts8 M6 x 30 mm bolts
.....part # 202027 - For Angle Bracket 201171 $ 752 carriage fastener rails (201174)2 base mounting brackets (46627)6 M5 x 20 mm bolts4 M6 x 30 mm bolts
.....part # 202028 - For Angle Bracket 201724 $ 1554 carriage fastener rails (201174)4 base mounting brackets (46627)8 M5 x 20 mm bolts8 M6 x 30 mm bolts
.....part # 202029 - For Angle Bracket 201724 $ 1904 carriage fastener rails (201174)6 base mounting brackets (46627)8 M5 x 20 mm bolts12 M6 x 30 mm bolts
.....part # 202030 - For Angle Bracket 201738 $ 1658 carriage fastener rails (201174)20 M5 x 20 mm bolts
Tubular Steel Drive Shaft Coupling ..........price for two end coupling assemblies and the tubular steel drive shaft length (maximum length = 118 inches or 3 m)
P.O.R.
Note: The above multiple axis mounting charges DO NOT include the adapter plate, or angle bracket. If required, an adapter plate or angle bracket, needs to be ordered separately.
57
P.O.R. - Price On RequestNC - No Charge
Options 550 Series- Belt Drive -
P.O.R.P.O.R.P.O.R.
P.O.R.P.O.R.P.O.R.
P.O.R.P.O.R.P.O.R.P.O.R.
P.O.R.P.O.R.P.O.R.P.O.R.
58
Ordering Guide 300 Series- Rotary Tables -
300 Series* rotary table
Table Series
Table Top Diameter
Motor Mount
06 - 6 inches
M00 - none
Coupling OptionsC000 - none
L00 - no switches
C001 to C004 - C075 C375 to C386 - G075
L99 - other
M99 - other
C999 - none
M02 C001- - L06-04506
M04 -M05 - NEMA 34 mount (M)
NEMA 34 mount (E)
home switch only Reed HallL06 L09
S -1 -3
08 - 8 inches 10 - 10 inches 12 - 12 inches
Gear Ratio045 - 45:1 090 - 90:1 180 - 180:1
Table Top Inserts1 - English mount 2 - Metric mount
GradeS - Standard P - Precision
M02 -M03 - NEMA 23 mount (M)
NEMA 23 mount (E)
Home Switches
(E) - English Interface- (M) Metric Interface
Model #
306045306090306180
Price
$ 2,045
6 inchTable Top
Model #
308045308090308180
Price
2,0452,045
$ 2,3952,3952,395
8 inchTable Top
Model #
310045310090310180
Price
$ 2,925
10 inchTable Top
Model #
312045312090312180
Price
2,9252,925
$ 3,2153,2153,215
12 inchTable Top
Table Top Inserts
1 ....................................... $ NC- English Mount 2 ......................................... $ - Metric Mount 195
Grade
S ............................................... $ NC- Standard P ............................................... $ - Precision 250
Motor Mounts
M02 ............................. $ - NEMA 23 mount (E)M03 ............................. $ - NEMA 23 mount (M)
M99 ............................. P.O.R.- Other motor mounts
NC115
Coupling Options
........................... $ 75C001 to - C075 style C004
........................... $ 130C375 to - G075 style C386
Home Switches
L06 ........................ $ 195- Home only wired (reed)L09 ......................... $ 245- Home only wired (hall)
M04 .... $ - NEMA 34 mount 8 & 12 inch top (E) 450M04 .... $ - NEMA 34 mount 6 & 10 inch top (E) 75
M05 .... $ - NEMA 34 mount 8 & 12 inch top (M) 600M05 .... $ - NEMA 34 mount 6 & 10 inch top (M) 165
C075-187-250C075-187-005C075-187-006C075-187-008
C001C002C003C004
G075-187-250G075-187-375G075-187-005G075-187-006G075-187-008G075-187-010G075-250-250G075-250-375G075-250-005G075-250-006G075-250-008G075-250-010
C375C376C377C378C379C380C381C382C383C384C385C386
Pricing Example: 312180-2-P-M05-C382-L09
312180-2-P-M05-C382-L09
======
$ 3,215195250600130245
$ 4,635
Coupling Part Numbers
59
P.O.R. - Price On RequestNC - No Charge
Options 300 Series- Rotary Tables -
60
Ordering Guide 400 Series- Rotary Tables -
400 Series* rotary table
(E) - English Interface
Table Series
Table Top Inserts
Home Switches L00 - no switches
home switch only Mechanical
L03 L99 - other
M04-- 1 - L03180064
1 - English mount
other
Motor Mount
M99 -
Gear Ratio
090 - 90 to 1 180 - 180 to 1 270 - 270 to 1
Table Top Diameter06 - 6 inches
360 - 360 to 1 030 - 30 to 1
M04 - NEMA 34 mount (E) (with 3/8 inch motor shaft bore)M05 - NEMA 34 mount (E) (with 1/2 inch motor shaft bore)
(inches)
406180
406270
406360
5.48
5.48
5.48
7,700
7,700
7,700
180:1
270:1
360:1
406090 5.48 7,70090:1
PriceGear RatioTable DiameterModel #
61
P.O.R. - Price On RequestNC - No Charge
Options 400 Series- Rotary Tables -
406030 5.48 $ 8,95030:1
Table Top Inserts
1 ....................................... $ NC- English Mount
Motor Mounts
M04 .. $ - NEMA 34 mount (E) (with 3/8 inch bore) NCM05 .. $ - NEMA 34 mount (E) (with 1/2 inch bore) NC
Home Switch
L03 ............ $ 215- Home only wired (mechanical)
YOUR LOCAL AUTOMATION SPECIALIST:
1845 Enterprise WayMonrovia, CA. 91016
Web Site:E-Mail:
Phone: (800) 435 - 7494 (626) 358 - 0110 (626) 303 - 2035 Fax:
LINTECH ®
For over 42 years, LINTECH® has designed and manufactured numerous standard
and custom mechanical motion control products that are used in a wide range of applications and markets. This document highlights cut to length round rail precision shafting, round rail linear bearings (with or without pillow blocks), steel & aluminum shaft supports, shaft assemblies (single & TWINRAIL
®), TWINRAIL®
carriage assemblies, profile rail linear bearings, rolled & ground ball screw assemblies, acme & ball screw driven actuators, belt driven slides, worm gear driven rotary tables, and a wide range of custom positioning assemblies.
Mechanical Motion Solutions