liquitainer paint specification
TRANSCRIPT
Version - 1.0 Date – 29/06/11
Paint Specification & Procedure
Page 1 of 1
Contents
1. Paint Test Result ……………………………………………………………….1
2. Procedure ……………………………………………………………………….2
3. System ………………….……………………………………………………….3
4. Paint
A. Safety Data Sheet …………………………….…………………….4
B. Technical Data Sheet ………………………………………………8
C. Test Report – ROHS Certificate …………………………………..9
5. Primer
A. Safety Data Sheet …………………………………………………15
B. Technical Data Sheet ……………………………………………..19
C. Test Report – ROHS Certificate ………………………………....20
Owner :- PANUS ASSEMBLY Co.,Ltd. ( Panusnikom-Chonburi )
Coating process :- Epoxy 2k anti-corrosive primer and Non-yellowing 2k Polyurethane topcoat.
Coating substrate :- For coating on new carbon steel by follows blast cleaning standard SSPC SP-10.
: To be cleaning follow up ISO 8501-1 : 2007
: Air dry cured minimum 7 day before testing
: 150 microns. or Depend on Spec. and Color
TEST ITEMS Test Results
Gloss 60o Specular gloss meter 90.2 to 94.7
Scratch Hardness Mitsubishi " uni " Pencil method F
Bending test Bending tester ( Cylindrical mandrel ) 2 mm
Impact test Impact tester (12.8 mm.) ; Falling-weight test
Adhesion test Cross - Cut 2 mm. X 2mm. 100 / 100
Salt spray test 5% NaCl Solution ( 360 hrs. ) No Rust / No blister
QUV test QUV Tester (720 hrs.) Gloss 60o retention 87.2 (Gloss 60
o reduce 3.33% )
No Chalking
Referance : According to Standard of " JIS handbook paint & vanish : 1999 "
Process Test Panel
1) Surface Preparation : Mill scale steel took from PANUS ASSEMBLY + Surface cleanliness as Sa2.5 ( ISO 8501-1 : 2007 ) + Free dust by Air blow
2) Paint Application :
( 50 or depend on Color Shade ) + Air dry 7 Days at Out door (Bake 80oC / 30 - 60 min)
Report date : July 18 , 2011
PAINTING INTERVAL 30oC
Air Dry : 16 Hours
JIS-K-5600-5-6
- Full cured period (30oC)
- Total dry film thickness
Gloss retention
(Bake 80oC / 30 - 60 min)
100 micron
or Depend on Color
PRODUCT NAME
Thai Kansai Paint Co., Ltd.180 Moo.3 Thaeparak Rd. Tumbol Thaeparak , Amphur Muang, Samutprakarn, 10270,Thailand. Tel. 0-2753-2377
PEC ZP PRIMER HB
(2 component)
PUC 7000 No.531 WHITE
(2 component)
50 micron
STANDARD TESTING
> 80
> B
JIS-K-5400-7.6
JIS-K-5600-5-4
( ISO : 2813 )
EQUIPMENT AND MATERIAL
( No crack / peeling)
JIS-K-5600-7-8
( ISO/FDIS : 11507 )
500 g x 50 cm.
(Bake 80oC / 30 - 60 min)
DRY FILM THICKNESS
Air Dry : 7 Days
Std.Spec.
or Depend on Spec.
100 / 100
< 6 mm
Not less than 30 %
JIS-K-5600-7-1 360 Hrs.
( ISO : 2409 )
No Rust / blister
Spray PEC ZP Primer HB ( 100 ) + Air dry Setting 16 Hrs. ( Bake 80oC / 30 - 60 min) + Spray PUC 7000 No.531 White
CONDITION
PROCEDURE
Polyurethane non yellowing
protective topcoat
Epoxy zinc phosphate high-build primer
( ISO : 7253 )
( No crack / peeling)
( ISO/DIS : 15184 )
JIS-K-5600-5-3
( ISO : 6272 )
( ISO : 1519 )
JIS-K-5600-5-1
-Carbon Steel Substrate was surface clanliness as Sa2.5
F
Reported by Komsan Phisnok
( Supervisor.TN-3 )Approved by
Asthasith Sanitjang( Section Manager.TN-3 )
Process
Visual inspection shall be made to confirm that the suface preparation is made in
Check surface profile 50 - 75 microns by surface profile gauge.
PEC ZP Primer HB Conventional Spray
Base : Hardener = 6.4 : 1 by weight Nozzle Size : 1.5 mm.
Thinner : 25 - 30 % by weight. Fluid Pressure : 0.4 kg/cm2 (6 psi)
PUC 7000 White Conventional Spray
Base : Hardener = 5 : 1 by weight Nozzle Size : 1.5 mm.
Thinner : 20 - 25 % by weight. Fluid Pressure : 0.4 kg/cm2 (6 psi)
Completed D.F.T. = 150 microns. & Good film appearance
Remark : Other information of paint ; please see the technical data and SDS for more information on safe handing and application of these products.
Thai Kansai Paint Co.,Ltd.
Application System
accordance with the specification herein ; Follow up cleaning standard SSPC SP-10.
Coating System
Approved by : Paint maker inspector - Thai Kansai Paint's
Update date : July 4 , 2011
Check wet film 92 . become to dry 50 microns. & confirm check D.F.T. 50 .2
- Remove rust, mill scale and other loose material completely by abrasive
blasting (SSPC SP-10).
- Average surface profile of 50 - 75 microns is requiredmust.
Painting Procedure ; Liquitainer Tank
Check wet film 183 . become to dry 100 microns. & confirm check D.F.T 100 .
TOTAL FILM THICKNESS
2
Inspection Method
Abrasive blast
In
spec
tio
n
Paint Name
No. Surface Preparation
1
Must be checked surface profile of 50 - 75 microns.
1
Wet & Dry Film ThicknessNo.
1
2
3
4
Approved byAsthasith Sanitjang(Section.Mgr.TN-3 )
Reported by Komsan phisnok
( Supervisor.TN-3 )
Owner's project :- Panus Assembly Co.,Ltd.
Project title :- Liquitainer Tank Project
Coating substrate :- Carbon steel Tank Fabrication.
Surface
Preparation 2. Abrasive blast clean to a minimum standard of Sa 2.5 (ISO8501-1:1988) or SSPC-SP10.
Application D.F.T. No. of Total D.F.T. Overcoating Thinner ratio
method (Kg/m2) (Lit/m
2) (m/coat) coat (m) Interval (30
oC) (weight %)
1. Epoxy primer Paint PEC ZP Primer HB
(Zinc phosphate primer) Hradener PEC Primer Hardener
Thinner PEC No.10 Thinner
2. Poly Urethane Paint PUC 7000 No.531 White
(White Color) Hradener PUC 7000 Hardener
Thinner PUC 7000 thinner
Recommended 150
Definition D.F.T : Dry Film Thickness SSPC : Steel Structure Painting Council
NACE : Nation Association of Corrosion Engineer ISO 8501-1 :2007: Internation Standard of Surface Preparasion
Remark Paint viscosity depend on spray equipment for necessary application system.
6 hrs. - Indefinite 20 - 250.153Conventional Spray 50 m 1 500.183
5 hrs. - Indefinite 25 - 30
Summary of painting system
Paint system
Process
Average surface profile of 50 - 75 microns is required.
3. The surface to be coated must be cleaned and dry and free from all visible traces of surface contaminants.
0.433
Tra
nsf
orm
er T
ank
1. Remove all wax, oil and grease by solvent cleaning in accordance with the guidelines given by SSPC-SP1.
Conventional Spray 0.305 100 m 1 100
Practical Coverage
Practical coverage is given as including 40% lost for air spray and Thinning ratio exclude cleaning equipments. Coating interval depend on specification.
Thai Kansai Paint Co.,Ltd.180 Moo 3, Teparuk rd.,Muang, Samutprakarn10270 Thailand
Approved byAsthasith Sanitjang
( Section Manager.TN-3 )
Reported by Worawut Intanai
( Asst.Supervisor.TN-3 )
Reported by Komsan phisnok
( Supervisor.TN-3 )
Update date : 5/7/2011 Thai Kansai Paint Co.,Ltd.
Product Name : PUC 7000 NO. 531 WHITE
1. PRODUCT AND COMPANY IDENTIFICATION
Product Name : PUC 7000 NO. 531 WHITE
Product Type : Polyurethane Enamel
Use : Top coat
Company Name : Thai Kansai Paint Co., Ltd.
Address : 180 Moo 3 Thaeparak Rd., Amphur Muang, Samutprakarn, 10270, Thailand.
Section in Charge : Construction Section Person in Charge : MR. Sayan Mandee
Telephone No. : 0-2753-2377 Fax No. : 0-2753-2775-6
Name of Preparer : Mr. Komsan Phitnok Date Prepared : July 05, 2011
Revision No. : 00
2. HAZARDS IDENTIFICATION
Physical Hazard : Flammable liquid
Health Hazard : Irritating to skin and eyes. May cause damage health.
: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Comment on Hazard : Extremely flammable liquid, May cause explosion when its vapor becomes dense.
3. COMPOSITION / INFORMATION ON INGREDIENTS
No.
1) Titanium Dioxide
2) Acrylic Resin
3) Methyl Proxital Acetate
4) Xylene
5) Isobutyl Acetate
4. FIRST AID MEASURES
Eye Contact : Immediately flush eyes with plenty of water for at least 15 minutes , Get
medical attention , If eye irritation develops or persists.
Skin Contact : In case of contact with skin, Immediately flush skin with large amount of water
for at least 15 minutes , Remove contaminated clothing , Get medical attention.
Inhalation : If inhaled , remove person to fresh air , if person is not breathing give artificial
respiration ,If breathing is labored give oxygen.
Ingestion : Rinse mouth with fresh water if person is conscious and get medical attention
immediately.
1 - 5
1 - 5
55 - 65
1 - 5
110-19-0
1330-20-7
Component / Chemical Name
SAFETY DATA SHEET ( SDS )
Composition Wt. (%)CAS No.
13463-67-7
-
25 - 35
180-65-6
(1 / 4) T3-RD-034/01
Product Name : PUC 7000 NO. 531 WHITE
SAFETY DATA SHEET ( SDS )
5. FIRE - FIGHTING MEASURES
Extinguishing Media : Use dry chemical powder , Carbon dioxides , foam
Fire Fighting : Fire fighters should wear complete protective clothing including self-contained
Instructions breathing apparatus.
: Shut off supply ; if not possible and no risk, let the fire burn itself out and remove
immediately flammable matter.
: Use specified extinguisher or extinguishing equipments.
6. ACCIDENTAL RELEASE MEASURES
In event of small spill : Absorb with dry sand or other non-flammable matter ,collected and disposed
of as hazardous waste.
In event of large spill : Cover with absorbent materials ( dry sand or other non-flammable matter ).
: Do not absorb in saw-dust or other combustible absorbents.
: Wear proper protectors gloves, respirator, safety goggles, etc.
: Collect leaking liquid in sealable ( metal / plastic ) containers.
: Remove immediately all ignition and the other flammable matters.
: Furnish with extinguisher proper for accidental fire.
: To clean all object contaminated , avoid run off into sewers.
7. HANDLING AND STORAGE
Handling : Handle in good ventilated area.
: Wash thoroughly hand and face after handling.
: Close tightly container with closer necessarily during and after use.
: Wear antistatic suits and shoes , while working.
: Use handtool of spark proof type and ground equipment.
: Wear proper protectors to avoid contact of skin or eyes when handling
open containers.
: Install proper local ventilator and wear proper protector in closed space.
Storage : Keep container closed and avoid direct sunlight.
: Store in good ventilation.
: Store with keeping away from ignition or heat source.
Storage Temperature : Ambient temperature
8. EXPOSURE CONTROLS AND PERSONAL PROTECTION
Engineering controls : Use explosion proof type equipment.
: Install proper exhauster to prevent concentrating of vapor.
: Ground equipment for fluid transfer, pumping and stirring.
: In application in closed space or the like tanks,Install equipment which can
(2 / 4) T3-RD-034/01
Product Name : PUC 7000 NO. 531 WHITE
SAFETY DATA SHEET ( SDS )
sufficiently ventilate even its bottom.
Personal protection
Respiration protection : Wear suitable mark and air-filtering respiratory .
Hand protection : Wear impervious protective PVC gloves to prevent contact with organic solvent.
Eye/Face protection : Wear protective eyewear ( goggles , face shield, or safety glasses ).
Skin&body protection : Wear suitable protective clothing to avoid direct contact of skin.
9. PHYSICAL & CHEMICAL PROPERTIES
Appearance : Liquid Color / Odor : White color
Melting point : NA Boiling point range : 118 - 150 °C
Flash point : 38 oC [ASTM D6450] CC. Auto-ignition point : 315 °C
Lower Explosion limit : 1.0 % (v/v) Upper Explosion limit : 10.5 % (v/v)
Vapour pressure : NA Water solubility : Insoluble
Specific Gravity : 1.21 ± 0.03 g/cm3 pH : NA
Log Kow : NA
Other : NA
10. STABILITY AND REACTIVITY
Chemical stability : Material is stable under normal conditions.
Conditions to Avoid : Heat , ignition sources ( flames , spark , static ).
Materials to Avoid : Strong oxidising agents.
Decomposition products : Emit hazardous gases of Carbon monoxide , Carbon dixide and
Inorganic oxide.
11. TOXICOLOGICAL INFORMATION
No.
1) Methyl Proxital Acetate
2) Xylene
3) Isobutyl Acetate
Sign :
TLV-TWA : Threshold Limit Values for chemical substances in workroom air or an 8-hour workday, 40-hour work week.
ACGIH : The American Conference of Governmental Industrial Hygienists (TLV)
OSHA : The Occupational Safety and Health Administration (PEL = Permissible Exposure Limit )
LD50M : Mouth ( Oral-rat ) mg/kg. LD50S : Dermal ( Skin-rabbit ) mg/kg. LC50 : Inhalation / Vapours ( rat ) mg/l.
12. ECOLOGICAL INFORMATION
LC50 [Inhale]LD50S
50 ppm - > 5,000
100 ppm
150 ppm
PEL (OSHA)Component / Chemical Name
17,400
TLV (ACGIH) LD50M
150 ppm
8,532
4,300
13,400
100 ppm
23.49
21.71
-
1,700
(3 / 4) T3-RD-034/01
Product Name : PUC 7000 NO. 531 WHITE
SAFETY DATA SHEET ( SDS )
: Take cautions in handling because it may contaminate environment when it leaks or spills or it is
dumped. Especially take cautions for product or rinsing water not to flow into the ground ,river.
13. DISPOSAL CONSIDERATIONS
: This material and its container must be disposed of as hazardous waste.
: Dispose of wastes in an approved waste disposal facility.
: Do not empty into drains
14. TRANSPORT INFORMATION
Proper Shipping Name : Paint & Rawmaterial related paint
UN. Class : Class 3
UN. Number : UN. 1263
Packing Group : PG. III
Land Transportation : Accord to each transportation under " ADR/RID code "
Air Transportation : Accord to each transportation under " ICAO/IATA code "
Maritime Transportation : Accord to each transportation under " IMO/IMDG code "
15. REGULATORY INFORMATION
Thai regulation : Hazardous substance ( Praradbunyut 2535 )
: Thai standard of Volatile Organic Content in air
16. OTHER INFORMATION
Note : NA : No data NC : Not Classify
NFPA Code 704 : Health ( Blue ) 2
: Flammability ( Red ) 3
: Reactivity ( Yellow ) 1
: Special data ( White ) -
SDS Effective date : July 05, 2011
Approved By : …………………………………………
( SAYAN MANDEE )
Position : Technical 3 Department Manager
Diamond Label
NF PA
12
3
(4 / 4) T3-RD-034/01
Thai Kansai Paint Co., Ltd.180 Moo.3 Thaeparak Rd. Tumbol Thaeparak ,
Amphur Muang, Samutprakarn, 10270,Thailand. Tel. 0-2753-2377
PUC 7000 Polyurethane Paint
KANSAI PAINT
TECHNICAL DATA
PRODUCT DESCRIPTION
A weather resisting polyurethane enamel base on acrylic polyol resin and non-yellowing
polyisocyanate hardener , has excellent gloss and color retention , excellent durability in
chemical and marine environment , provide hardness and abrasion resistance , fast dry
and good applicable.
USES
As a topcoat for protection of structural steel, tank external or fiber glass surfaces in severely As a topcoat for protection of structural steel, tank external or fiber glass surfaces in severely
corrosive atmospheric environment. Where light-fastness and gloss retention are required.
PHYSICAL PROPERTIES
Vehicle Type Acrylic aliphatic polyurethane paint ( non yellowing ) , high solid
Color White , as specifided.
Hardener Name PUC 7000 HardenerHardener Name PUC 7000 Hardener
Specific gravity 1.20 g/cm3 ( Mixed )
Solids by weight 66 + 1% ( Mixed )
Solids by volume 55 + 1 % ( Mixed )
Flash Point Base = 38 oC , Hardener = 42
oC
Pot life at 20 oC at 30
oC
5 Hrs. 4 Hrs.
Drying time
Surface dry 4 Hrs. 3 Hrs.Surface dry 4 Hrs. 3 Hrs.
Semi dry hard 6 Hrs. 4 Hrs.
Coating interval 8 Hrs. 6 Hrs.
Theoretical coverage 9.10 m2 / Kg / 50 microns 6.50 m2 / Kg / 70 microns
10.90 m2 / L / 50 microns 7.80 m
2 / L / 70 microns
Practical coverage 5.46 m2 / Kg / 50 microns for spray 3.90 m2 / Kg / 70 microns for spray
( Included 40% lost ) 6.54 m2 / L / 50 microns for spray 4.67 m
2 / L / 70 microns for spray
Standard Film ThicknessStandard Film Thickness
Wet Film 92 microns / Coat 129 microns / Coat
Dry Film 50 microns / Coat 70 microns / Coat
APPLICATION METHOD
Tools Apply by brush, roller air spray and aieless spray.
Mixing Ratio Base : Hardener = 20 Kg : 4 Kg ( 5 : 1 By Weight )
Base : Hardener = 16.53 Liters : 3.54 Liters ( 4.7 : 1 By Volume )Base : Hardener = 16.53 Liters : 3.54 Liters ( 4.7 : 1 By Volume )
Thinner PUC 7000 thinner
Thinning Ratio For brush , roller : 5 - 10 % By weight
Viscosity : 40 - 50 sec. / Iwata cup NK-2 / 30 oC
For conventional spray : 20 - 25 % By weight
Viscosity : 14 - 16 sec. / Iwata cup NK-2 / 30 oC
For airless spray : 5 - 10 % By weight
Tip No. : Graco 615, 617
Paint output pressure : 12 -15 MPaPaint output pressure : 12 -15 MPa
Viscosity : 35 - 45 sec. / Iwata cup NK-2 /30 oC
APPLICATION SYSTEM
The surface to be coated must be clean and dry and free from all vissible traces of surface
contaminants.
Metal surfaces : Apply 1-2 Coat of Epoxy primer (Anti-corrosive primer) before apply top coat.
Fiber glass surfaces : Apply 1-2 Coat of Epoxy undercoat ( Primer and under coat ) before apply top coat.
surfaces preparation :
Fiber glass surfaces : Apply 1-2 Coat of Epoxy undercoat ( Primer and under coat ) before apply top coat.
LIMITATIONS
At application temperature below 10 oC , drying and curing time will be significantly impaired.
Product Name : PEC ZP PRIMER HB
1. PRODUCT AND COMPANY IDENTIFICATION
Product Name : PEC ZP PRIMER HB
Product Type : Epoxy Enamel
Use : Primer
Company Name : Thai Kansai Paint Co., Ltd.
Address : 180 Moo 3 Thaeparak Rd., Amphur Muang, Samutprakarn, 10270, Thailand.
Section in Charge : Construction Section Person in Charge : MR. Sayan Mandee
Telephone No. : 0-2753-2377 Fax No. : 0-2753-2775-6
Name of Preparer : Mr. Komsan Phitnok Date Prepared : July 05, 2011
Revision No. : 00
2. HAZARDS IDENTIFICATION
Physical Hazard : Flammable liquid
Health Hazard : Irritating to skin and eyes. May cause damage health.
: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Comment on Hazard : Extremely flammable liquid, May cause explosion when its vapor becomes dense.
3. COMPOSITION / INFORMATION ON INGREDIENTS
No.
1) Cabon black
2) Zinc phosphate
3) Titanium dioxide
5) Extender Pigment
6) Epoxy Resin
7) Xylene
8) Methyl Proxitol Acetate
8) Methyl isobutyl ketone
4. FIRST AID MEASURES
Eye Contact : Immediately flush eyes with plenty of water for at least 15 minutes , Get
medical attention , If eye irritation develops or persists.
Skin Contact : In case of contact with skin, Immediately flush skin with large amount of water
for at least 15 minutes , Remove contaminated clothing , Get medical attention.
Inhalation : If inhaled , remove person to fresh air , if person is not breathing give artificial
respiration ,If breathing is labored give oxygen.
Ingestion : Rinse mouth with fresh water if person is conscious and get medical attention
10 - 15
-
-
35 - 40
20 - 30
1 - 5
10 - 15
108-65-6
180-10-1
5 - 10
1 - 5
1330-20-7
Component / Chemical Name
SAFETY DATA SHEET ( SDS )
Composition Wt. (%)CAS No.
1333-86-4
7779-90-0
0 - 1
13463-67-7
(1 / 4) T3-RD-034/01
Product Name : PEC ZP PRIMER HB
SAFETY DATA SHEET ( SDS )
immediately.
5. FIRE - FIGHTING MEASURES
Extinguishing Media : Use dry chemical powder , Carbon dioxides , foam
Fire Fighting : Fire fighters should wear complete protective clothing including self-contained
Instructions breathing apparatus.
: Shut off supply ; if not possible and no risk, let the fire burn itself out and remove
immediately flammable matter.
: Use specified extinguisher or extinguishing equipments.
6. ACCIDENTAL RELEASE MEASURES
In event of small spill : Absorb with dry sand or other non-flammable matter ,collected and disposed
of as hazardous waste.
In event of large spill : Cover with absorbent materials ( dry sand or other non-flammable matter ).
: Do not absorb in saw-dust or other combustible absorbents.
: Wear proper protectors gloves, respirator, safety goggles, etc.
: Collect leaking liquid in sealable ( metal / plastic ) containers.
: Remove immediately all ignition and the other flammable matters.
: Furnish with extinguisher proper for accidental fire.
: To clean all object contaminated , avoid run off into sewers.
7. HANDLING AND STORAGE
Handling : Handle in good ventilated area.
: Wash thoroughly hand and face after handling.
: Close tightly container with closer necessarily during and after use.
: Wear antistatic suits and shoes , while working.
: Use handtool of spark proof type and ground equipment.
: Wear proper protectors to avoid contact of skin or eyes when handling
open containers.
: Install proper local ventilator and wear proper protector in closed space.
Storage : Keep container closed and avoid direct sunlight.
: Store in good ventilation.
: Store with keeping away from ignition or heat source.
Storage Temperature : Ambient temperature
8. EXPOSURE CONTROLS AND PERSONAL PROTECTION
Engineering controls : Use explosion proof type equipment.
: Install proper exhauster to prevent concentrating of vapor.
(2 / 4) T3-RD-034/01
Product Name : PEC ZP PRIMER HB
SAFETY DATA SHEET ( SDS )
: Ground equipment for fluid transfer, pumping and stirring.
: In application in closed space or the like tanks,Install equipment which can
sufficiently ventilate even its bottom.
Personal protection
Respiration protection : Wear suitable mark and air-filtering respiratory .
Hand protection : Wear impervious protective PVC gloves to prevent contact with organic solvent.
Eye/Face protection : Wear protective eyewear ( goggles , face shield, or safety glasses ).
Skin&body protection : Wear suitable protective clothing to avoid direct contact of skin.
9. PHYSICAL & CHEMICAL PROPERTIES
Appearance : Liquid Color / Odor : Gray
Melting point : NA Boiling point range : 98 - 152 °C
Flash point : 28 oC [ASTM D6450] CC. Auto-ignition point : 315 °C
Lower Explosion limit : 1.0 % (v/v) Upper Explosion limit : 12.7 % (v/v)
Vapour pressure : NA Water solubility : Insoluble
Specific Gravity : 1.60 ± 0.03 g/cm3 pH : NA
Log Kow : NA
Other : NA
10. STABILITY AND REACTIVITY
Chemical stability : Material is stable under normal conditions.
Conditions to Avoid : Heat , ignition sources ( flames , spark , static ).
Materials to Avoid : Strong oxidising agents.
Decomposition products : Emit hazardous gases of Carbon monoxide , Carbon dixide and
Inorganic oxide.
11. TOXICOLOGICAL INFORMATION
No.
1) Xylene
2) Methyl Proxitol Acetate
3) Methyl isobutyl ketone
Sign :
TLV-TWA : Threshold Limit Values for chemical substances in workroom air or an 8-hour workday, 40-hour work week.
ACGIH : The American Conference of Governmental Industrial Hygienists (TLV)
OSHA : The Occupational Safety and Health Administration (PEL = Permissible Exposure Limit )
LC50 [Inhale]LD50S
100 ppm 100 ppm
TLV (ACGIH) LD50M
100 ppm
50 ppm
50 ppm 400
PEL (OSHA)Component / Chemical Name
4,300
8,532
2,080
-
21.7
23.49
1.60
5,000
1,700
(3 / 4) T3-RD-034/01
Product Name : PEC ZP PRIMER HB
SAFETY DATA SHEET ( SDS )
LD50M : Mouth ( Oral-rat ) mg/kg. LD50S : Dermal ( Skin-rabbit ) mg/kg. LC50 : Inhalation / Vapours ( rat ) mg/l.
12. ECOLOGICAL INFORMATION
: Take cautions in handling because it may contaminate environment when it leaks or spills or it is
dumped. Especially take cautions for product or rinsing water not to flow into the ground ,river.
13. DISPOSAL CONSIDERATIONS
: This material and its container must be disposed of as hazardous waste.
: Dispose of wastes in an approved waste disposal facility.
: Do not empty into drains
14. TRANSPORT INFORMATION
Proper Shipping Name : Paint & Rawmaterial related paint
UN. Class : Class 3
UN. Number : UN. 1263
Packing Group : PG. III
Land Transportation : Accord to each transportation under " ADR/RID code "
Air Transportation : Accord to each transportation under " ICAO/IATA code "
Maritime Transportation : Accord to each transportation under " IMO/IMDG code "
15. REGULATORY INFORMATION
Thai regulation : Hazardous substance ( Praradbunyut 2535 )
: Thai standard of Volatile Organic Content in air
16. OTHER INFORMATION
Note : NA : No data NC : Not Classify
NFPA Code 704 : Health ( Blue ) 2
: Flammability ( Red ) 3
: Reactivity ( Yellow ) 1
: Special data ( White ) -
SDS Effective date : July 05, 2011
Approved By : …………………………………………
( Mr. SAYAN MANDEE )
Position : Asst. General Manager
Diamond Label
NF PA
12
3
(4 / 4) T3-RD-034/01
Thai Kansai Paint Co., Ltd.180 Moo.3 Thaeparak Rd. Tumbol Thaeparak ,
Amphur Muang, Samutprakarn, 10270,Thailand. Tel. 0-2753-2377
PEC ZP PRIMER HB
Epoxy High Solid Zinc Phosphate Primer
ข้อมูลทางเทคนิคTECHNICAL DATA
KANSAI PAINT
PRODUCT DESCRIPTION
A two component highbuild epoxy zinc phosphate anti-corrosive primer. It gives excellent
properties such as an anti-corrosive to sea water, moisture, chemicals, petroleum solvents,
aliphatic solvents and weather resistance.
USES
Design to be Primer or undercoat anti-corrosive protection of steel structure surfaces
prepared by abrasive blast cleaning.prepared by abrasive blast cleaning.
PHYSICAL PROPERTIES
Vehicle Type Epoxy resin.
Color Grey
Hardener Name PEC Primer Hardener
Specific gravity 1.42 g/cm3 (Mixed)
Solids by weight 73 + 1 % (Mixed)
Solids by volume 55 + 1 % (Mixed)Solids by volume 55 + 1 % (Mixed)
Flash Point Base = 28 oC , Hardener = 34
oC
Pot life at 20 oC at 30
oC
5 Hrs. 3 Hrs.
Drying time
Surface dry 2 mins 1 Hr.
Semi dry hard 6 Hrs. 4 Hrs.
Coating interval 7 Hrs. 5 Hrs.Coating interval 7 Hrs. 5 Hrs.
Theoretical coverage 5.13 m2 / Kg / 75 microns 3.85 m
2 / Kg / 100 microns
7.28 m2 / L / 75 microns 5.46 m
2 / L / 100 microns
Practical coverage 3.08 m2 / Kg / 75 microns for spray 2.31 m
2 / Kg / 100 microns for spray
( Included 40% loss ) 4.37 m2 / L / 75 microns for spray 3.28 m
2 / L / 100 microns for spray
Standard Film Thickness
Wet Film 137 microns / Coat 183 microns / Coat
Dry Film 75 microns / Coat 100 microns / Coat
APPLICATION METHOD
Tools Apply by brush, roller, air spray and airless spray.
Mixing Ratio Base : Hardener = 24 Kg : 3.72 Kg ( 6.4 : 1 By Weight )
Base : Hardener = 16 Lit : 4 Lit ( 4 : 1 By Volume )
Thinner PEC thinner No.10
Thinning Ratio For brush : 0 - 5 % by weight
For conventional spray : 25 - 30 % by weight
Viscosity : 18 - 20 sec./ Iwata cup NK-2 /30 oCViscosity : 18 - 20 sec./ Iwata cup NK-2 /30 oC
For airless spray : 5 - 10 % by weight
Tip No. : Graco 621, 623
Paint output pressure : 14 -17 MPa
Viscosity : 35 - 45 sec./ Iwata cup NK-2 /30 oC
APPLICATION SYSTEM
Abrasive blast clean to a minimum standard of Sa2.5 (ISO8501-1:2007) or SSPC-SP10.
Average surface profile of 50-75 microns is required.
surfaces preparation :
Average surface profile of 50-75 microns is required.
The surface to be coated must be clean and dry and free from all visible traces of surface
contaminants.
LIMITATIONS
Application at temperature below 10 oC, drying and curing time will be significantly impaired.